| # SPDX-License-Identifier: GPL-2.0-only |
| config SND_SOC_SOF_INTEL_TOPLEVEL |
| bool "SOF support for Intel audio DSPs" |
| depends on X86 || COMPILE_TEST |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| if SND_SOC_SOF_INTEL_TOPLEVEL |
| |
| config SND_SOC_SOF_INTEL_HIFI_EP_IPC |
| tristate |
| help |
| This option is not user-selectable but automagically handled by |
| 'select' statements at a higher level. |
| |
| config SND_SOC_SOF_INTEL_ATOM_HIFI_EP |
| tristate |
| select SND_SOC_SOF_INTEL_COMMON |
| select SND_SOC_SOF_INTEL_HIFI_EP_IPC |
| help |
| This option is not user-selectable but automagically handled by |
| 'select' statements at a higher level. |
| |
| config SND_SOC_SOF_INTEL_COMMON |
| tristate |
| select SND_SOC_SOF |
| select SND_SOC_ACPI_INTEL_MATCH |
| select SND_SOC_SOF_XTENSA |
| select SND_SOC_INTEL_MACH |
| select SND_SOC_ACPI if ACPI |
| select SND_INTEL_DSP_CONFIG |
| help |
| This option is not user-selectable but automagically handled by |
| 'select' statements at a higher level. |
| |
| if SND_SOC_SOF_ACPI |
| |
| config SND_SOC_SOF_BAYTRAIL |
| tristate "SOF support for Baytrail, Braswell and Cherrytrail" |
| default SND_SOC_SOF_ACPI |
| select SND_SOC_SOF_INTEL_COMMON |
| select SND_SOC_SOF_INTEL_ATOM_HIFI_EP |
| select SND_SOC_SOF_ACPI_DEV |
| select IOSF_MBI if X86 && PCI |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Baytrail, Braswell or Cherrytrail processors. |
| This option can coexist in the same build with the Atom legacy |
| drivers, currently the default but which will be deprecated |
| at some point. |
| Existing firmware/topology binaries and UCM configurations |
| typically located in the root file system are already |
| compatible with both SOF or Atom/SST legacy drivers. |
| This is a recommended option for distributions. |
| Say Y if you want to enable SOF on Baytrail/Cherrytrail. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_BROADWELL |
| tristate "SOF support for Broadwell" |
| default SND_SOC_SOF_ACPI |
| select SND_SOC_SOF_INTEL_COMMON |
| select SND_SOC_SOF_INTEL_HIFI_EP_IPC |
| select SND_SOC_SOF_ACPI_DEV |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Broadwell processors. |
| This option can coexist in the same build with the default 'catpt' |
| driver. |
| Existing firmware/topology binaries and UCM configurations typically |
| located in the root file system are already compatible with both SOF |
| or catpt drivers. |
| SOF does not fully support Broadwell and has limitations related to |
| DMA and suspend-resume, this is not a recommended option for |
| distributions. |
| Say Y if you want to enable SOF on Broadwell. |
| If unsure select "N". |
| |
| endif ## SND_SOC_SOF_ACPI |
| |
| if SND_SOC_SOF_PCI |
| |
| config SND_SOC_SOF_MERRIFIELD |
| tristate "SOF support for Tangier/Merrifield" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_ATOM_HIFI_EP |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Tangier/Merrifield processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_INTEL_APL |
| tristate |
| select SND_SOC_SOF_HDA_COMMON |
| |
| config SND_SOC_SOF_APOLLOLAKE |
| tristate "SOF support for Apollolake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_APL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Apollolake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_GEMINILAKE |
| tristate "SOF support for GeminiLake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_APL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Geminilake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_INTEL_CNL |
| tristate |
| select SND_SOC_SOF_HDA_COMMON |
| select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE |
| |
| config SND_SOC_SOF_CANNONLAKE |
| tristate "SOF support for Cannonlake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_CNL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Cannonlake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_COFFEELAKE |
| tristate "SOF support for CoffeeLake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_CNL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Coffeelake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_COMETLAKE |
| tristate "SOF support for CometLake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_CNL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Cometlake processors. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_INTEL_ICL |
| tristate |
| select SND_SOC_SOF_HDA_COMMON |
| select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE |
| |
| config SND_SOC_SOF_ICELAKE |
| tristate "SOF support for Icelake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_ICL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Icelake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_JASPERLAKE |
| tristate "SOF support for JasperLake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_ICL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the JasperLake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_INTEL_TGL |
| tristate |
| select SND_SOC_SOF_HDA_COMMON |
| select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE |
| |
| config SND_SOC_SOF_TIGERLAKE |
| tristate "SOF support for Tigerlake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_TGL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Tigerlake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_ELKHARTLAKE |
| tristate "SOF support for ElkhartLake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_TGL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the ElkhartLake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_ALDERLAKE |
| tristate "SOF support for Alderlake" |
| default SND_SOC_SOF_PCI |
| select SND_SOC_SOF_INTEL_TGL |
| help |
| This adds support for Sound Open Firmware for Intel(R) platforms |
| using the Alderlake processors. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_HDA_COMMON |
| tristate |
| select SND_SOC_SOF_INTEL_COMMON |
| select SND_SOC_SOF_PCI_DEV |
| select SND_INTEL_DSP_CONFIG |
| select SND_SOC_SOF_HDA_LINK_BASELINE |
| help |
| This option is not user-selectable but automagically handled by |
| 'select' statements at a higher level. |
| |
| if SND_SOC_SOF_HDA_COMMON |
| |
| config SND_SOC_SOF_HDA_LINK |
| bool "SOF support for HDA Links(HDA/HDMI)" |
| depends on SND_SOC_SOF_NOCODEC=n |
| select SND_SOC_SOF_PROBE_WORK_QUEUE |
| help |
| This adds support for HDA links(HDA/HDMI) with Sound Open Firmware |
| for Intel(R) platforms. |
| Say Y if you want to enable HDA links with SOF. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_HDA_AUDIO_CODEC |
| bool "SOF support for HDAudio codecs" |
| depends on SND_SOC_SOF_HDA_LINK |
| help |
| This adds support for HDAudio codecs with Sound Open Firmware |
| for Intel(R) platforms. |
| Say Y if you want to enable HDAudio codecs with SOF. |
| If unsure select "N". |
| |
| config SND_SOC_SOF_HDA_PROBES |
| bool "SOF enable probes over HDA" |
| depends on SND_SOC_SOF_DEBUG_PROBES |
| help |
| This option enables the data probing for Intel(R) |
| Skylake and newer platforms. |
| Say Y if you want to enable probes. |
| If unsure, select "N". |
| |
| endif ## SND_SOC_SOF_HDA_COMMON |
| |
| config SND_SOC_SOF_HDA_LINK_BASELINE |
| tristate |
| select SND_SOC_SOF_HDA if SND_SOC_SOF_HDA_LINK |
| help |
| This option is not user-selectable but automagically handled by |
| 'select' statements at a higher level. |
| |
| config SND_SOC_SOF_HDA |
| tristate |
| select SND_HDA_EXT_CORE if SND_SOC_SOF_HDA_LINK |
| select SND_SOC_HDAC_HDA if SND_SOC_SOF_HDA_AUDIO_CODEC |
| help |
| This option is not user-selectable but automagically handled by |
| 'select' statements at a higher level. |
| |
| config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE |
| tristate |
| select SOUNDWIRE_INTEL if SND_SOC_SOF_INTEL_SOUNDWIRE |
| select SND_INTEL_SOUNDWIRE_ACPI if SND_SOC_SOF_INTEL_SOUNDWIRE |
| |
| config SND_SOC_SOF_INTEL_SOUNDWIRE |
| tristate "SOF support for SoundWire" |
| default SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE |
| depends on SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE |
| depends on ACPI && SOUNDWIRE |
| depends on !(SOUNDWIRE=m && SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y) |
| help |
| This adds support for SoundWire with Sound Open Firmware |
| for Intel(R) platforms. |
| Say Y if you want to enable SoundWire links with SOF. |
| If unsure select "N". |
| |
| endif ## SND_SOC_SOF_PCI |
| |
| endif ## SND_SOC_SOF_INTEL_TOPLEVEL |
