| # |
| # This file is part of the coreboot project. |
| # |
| # Copyright (C) 2015-2017 Advanced Micro Devices, Inc. |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; version 2 of the License. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| chip soc/amd/stoneyridge |
| register "spd_addr_lookup" = " |
| { |
| { {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0 |
| }" |
| register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP" |
| register "uma_mode" = "UMAMODE_SPECIFIED_SIZE" |
| register "uma_size" = "16 * MiB" |
| register "stapm_percent" = "68" |
| register "stapm_time_ms" = "2500000" |
| register "stapm_power_mw" = "7800" |
| |
| # Enable I2C0 for audio, USB3 hub at 400kHz |
| register "i2c[0]" = "{ |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 58, |
| .fall_time_ns = 3, |
| }" |
| |
| # Enable I2C1 for H1 at 400kHz |
| register "i2c[1]" = "{ |
| .early_init = 1, |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 45, |
| .fall_time_ns = 4, |
| }" |
| |
| # Enable I2C2 for trackpad, pen at 400kHz |
| register "i2c[2]" = "{ |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 25, |
| .fall_time_ns = 11, |
| }" |
| |
| # Enable I2C3 for touchscreen at 400kHz |
| register "i2c[3]" = "{ |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 22, |
| .fall_time_ns = 19, |
| }" |
| |
| register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \ |
| GPIO_I2C2_SCL | GPIO_I2C3_SCL" |
| |
| device cpu_cluster 0 on |
| device lapic 10 on end |
| end |
| device domain 0 on |
| device pci 0.0 on end # Root Complex |
| device pci 0.2 off end # IOMMU (Disabled for performance and battery) |
| device pci 1.0 on end # Internal Graphics P2P bridge 0x98e4 |
| device pci 1.1 on end # Internal Multimedia |
| device pci 2.0 on end # PCIe Host Bridge |
| device pci 2.1 on end # |
| device pci 2.2 on end # |
| device pci 2.3 on end # |
| device pci 2.4 on |
| chip drivers/generic/bayhub |
| register "power_saving" = "1" |
| device pci 00.0 on end |
| end |
| end # |
| device pci 2.5 on end # |
| device pci 8.0 on end # PSP |
| device pci 9.0 on end # PCIe Host Bridge |
| device pci 9.2 on end # HDA |
| device pci 10.0 on end # xHCI |
| device pci 11.0 off end # SATA |
| device pci 12.0 on end # EHCI |
| device pci 14.0 on # SMbus |
| end # SMbus |
| device pci 14.3 on |
| chip ec/google/chromeec |
| device pnp 0c09.0 on end |
| end |
| end # LPC |
| device pci 14.7 on end # SD |
| device pci 18.0 on end |
| device pci 18.1 on end |
| device pci 18.2 on end |
| device pci 18.3 on end |
| device pci 18.4 on end |
| device pci 18.5 on end |
| end #domain |
| device mmio 0xfedc2000 on |
| chip drivers/generic/adau7002 |
| register "wakeup_delay" = "20" |
| device generic 0.0 on end |
| end |
| chip drivers/i2c/da7219 |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)" |
| register "btn_cfg" = "50" |
| register "mic_det_thr" = "200" |
| register "jack_ins_deb" = "20" |
| register "jack_det_rate" = ""32ms_64ms"" |
| register "jack_rem_deb" = "1" |
| register "a_d_btn_thr" = "0xa" |
| register "d_b_btn_thr" = "0x16" |
| register "b_c_btn_thr" = "0x21" |
| register "c_mic_btn_thr" = "0x3e" |
| register "btn_avg" = "4" |
| register "adc_1bit_rpt" = "1" |
| register "micbias_lvl" = "2600" |
| register "mic_amp_in_sel" = ""diff"" |
| register "mclk_name" = ""oscout1"" |
| device i2c 1a on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "uid" = "1" |
| register "desc" = ""Realtek RT5682"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_14)" |
| register "property_count" = "2" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| register "property_list[1].type" = "ACPI_DP_TYPE_STRING" |
| register "property_list[1].name" = ""realtek,mclk-name"" |
| register "property_list[1].string" = ""oscout1"" |
| device i2c 1a on end |
| end |
| chip drivers/generic/max98357a |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)" |
| register "sdmode_delay" = "5" |
| device generic 0.1 on end |
| end |
| end |
| device mmio 0xfedc3000 on |
| chip drivers/i2c/tpm |
| register "hid" = ""GOOG0005"" |
| register "desc" = ""Cr50 TPM"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)" |
| device i2c 50 on end |
| end |
| end |
| device mmio 0xfedc4000 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)" |
| register "wake" = "7" |
| device i2c 15 on end |
| end |
| end |
| device mmio 0xfedc5000 on |
| chip drivers/i2c/generic |
| register "hid" = ""RAYD0001"" |
| register "desc" = ""Raydium Touchscreen"" |
| register "probed" = "1" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_11)" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" |
| register "reset_delay_ms" = "20" |
| register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" |
| register "enable_delay_ms" = "1" |
| register "has_power_resource" = "1" |
| device i2c 39 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0001"" |
| register "desc" = ""ELAN Touchscreen"" |
| register "probed" = "1" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" |
| register "reset_delay_ms" = "20" |
| register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" |
| register "enable_delay_ms" = "1" |
| register "has_power_resource" = "1" |
| device i2c 10 on end |
| end |
| chip drivers/i2c/hid |
| register "generic.hid" = ""GTCH7503"" |
| register "generic.desc" = ""G2TOUCH Touchscreen"" |
| register "generic.probed" = "1" |
| register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" |
| register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" |
| register "generic.reset_delay_ms" = "50" |
| register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" |
| register "generic.enable_delay_ms" = "1" |
| register "generic.has_power_resource" = "1" |
| register "generic.disable_gpio_export_in_crs" = "1" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 40 on end |
| end |
| end |
| end #chip soc/amd/stoneyridge |
