ap_firmware_config: Add support for Brya
This patch adds support for the `build-ap` and `flash-ap` commands for
Brya. It supports C2D2 and CCD for flashing mechanisms, and has the
standard list of packages to build for an Intel ChromeOS system.
BUG=b:180129660
TEST=`cros flash-ap -b brya -i image-brya0.serial.bin` and
`cros build-ap -b brya`
Change-Id: I305de7afd4b28895d2a7f92cf0e71796f1cb4329
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/chromite/+/2693389
Commit-Queue: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Abraham <seanabraham@chromium.org>
Reviewed-by: Alex Klein <saklein@chromium.org>
diff --git a/lib/firmware/ap_firmware_config/brya.py b/lib/firmware/ap_firmware_config/brya.py
new file mode 100644
index 0000000..c34c5ad
--- /dev/null
+++ b/lib/firmware/ap_firmware_config/brya.py
@@ -0,0 +1,72 @@
+# -*- coding: utf-8 -*-
+# Copyright 2021 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+
+"""Brya configs."""
+
+from __future__ import print_function
+
+_COMMON_PACKAGES = (
+ 'chromeos-ec',
+ 'coreboot',
+ 'depthcharge',
+ 'libpayload',
+ 'vboot_reference',
+)
+
+BUILD_WORKON_PACKAGES = _COMMON_PACKAGES + (
+ 'coreboot-private-files-baseboard-brya',
+)
+
+BUILD_PACKAGES = _COMMON_PACKAGES + (
+ 'chromeos-bootimage',
+ 'coreboot-private-files',
+ 'intel-adlfsp',
+)
+
+def get_commands(servo):
+ """Get specific flash commands for Brya
+
+ Each board needs specific commands including the voltage for Vref, to turn
+ on and turn off the SPI flash. The get_*_commands() functions provide a
+ board-specific set of commands for these tasks. The voltage for this board
+ needs to be set to 3.3 V.
+
+ Args:
+ servo (servo_lib.Servo): The servo connected to the target DUT.
+
+ Returns:
+ list: [dut_control_on, dut_control_off, flashrom_cmd, futility_cmd]
+ dut_control*=2d arrays formmated like [["cmd1", "arg1", "arg2"],
+ ["cmd2", "arg3", "arg4"]]
+ where cmd1 will be run before cmd2
+ flashrom_cmd=command to flash via flashrom
+ futility_cmd=command to flash via futility
+ """
+ dut_control_on = []
+ dut_control_off = []
+
+ # Common flashing sequence for C2D2 and CCD
+ # Shutdown AP so that it enters G3 state.
+ dut_control_on.append(['ec_uart_cmd:apshutdown'])
+ # Sleep to ensure the SoC rails get chance to discharge enough.
+ dut_control_on.append(['sleep:5'])
+
+ if servo.is_c2d2:
+ dut_control_on.append(['ap_flash_select:on'])
+ dut_control_on.append(['spi2_vref:pp3300'])
+ dut_control_off.append(['spi2_vref:off'])
+ dut_control_off.append(['ap_flash_select:off'])
+ programmer = 'raiden_debug_spi:serial=%s' % servo.serial
+ elif servo.is_ccd:
+ dut_control_off.append(['power_state:reset'])
+ programmer = ('raiden_debug_spi:target=AP,custom_rst=True,serial=%s' %
+ servo.serial)
+ else:
+ raise Exception('%s not supported' % servo.version)
+
+ flashrom_cmd = ['flashrom', '-p', programmer, '-w']
+ futility_cmd = ['futility', 'update', '-p', programmer, '-i']
+
+ return [dut_control_on, dut_control_off, flashrom_cmd, futility_cmd]
