diff --git a/lib/firmware/ap_firmware_config/brya.py b/lib/firmware/ap_firmware_config/brya.py
new file mode 100644
index 0000000..c34c5ad
--- /dev/null
+++ b/lib/firmware/ap_firmware_config/brya.py
@@ -0,0 +1,72 @@
+# -*- coding: utf-8 -*-
+# Copyright 2021 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+
+"""Brya configs."""
+
+from __future__ import print_function
+
+_COMMON_PACKAGES = (
+    'chromeos-ec',
+    'coreboot',
+    'depthcharge',
+    'libpayload',
+    'vboot_reference',
+)
+
+BUILD_WORKON_PACKAGES = _COMMON_PACKAGES + (
+    'coreboot-private-files-baseboard-brya',
+)
+
+BUILD_PACKAGES = _COMMON_PACKAGES + (
+    'chromeos-bootimage',
+    'coreboot-private-files',
+    'intel-adlfsp',
+)
+
+def get_commands(servo):
+  """Get specific flash commands for Brya
+
+  Each board needs specific commands including the voltage for Vref, to turn
+  on and turn off the SPI flash. The get_*_commands() functions provide a
+  board-specific set of commands for these tasks. The voltage for this board
+  needs to be set to 3.3 V.
+
+  Args:
+    servo (servo_lib.Servo): The servo connected to the target DUT.
+
+  Returns:
+    list: [dut_control_on, dut_control_off, flashrom_cmd, futility_cmd]
+      dut_control*=2d arrays formmated like [["cmd1", "arg1", "arg2"],
+                                             ["cmd2", "arg3", "arg4"]]
+                   where cmd1 will be run before cmd2
+      flashrom_cmd=command to flash via flashrom
+      futility_cmd=command to flash via futility
+  """
+  dut_control_on = []
+  dut_control_off = []
+
+  # Common flashing sequence for C2D2 and CCD
+  # Shutdown AP so that it enters G3 state.
+  dut_control_on.append(['ec_uart_cmd:apshutdown'])
+  # Sleep to ensure the SoC rails get chance to discharge enough.
+  dut_control_on.append(['sleep:5'])
+
+  if servo.is_c2d2:
+    dut_control_on.append(['ap_flash_select:on'])
+    dut_control_on.append(['spi2_vref:pp3300'])
+    dut_control_off.append(['spi2_vref:off'])
+    dut_control_off.append(['ap_flash_select:off'])
+    programmer = 'raiden_debug_spi:serial=%s' % servo.serial
+  elif servo.is_ccd:
+    dut_control_off.append(['power_state:reset'])
+    programmer = ('raiden_debug_spi:target=AP,custom_rst=True,serial=%s' %
+                  servo.serial)
+  else:
+    raise Exception('%s not supported' % servo.version)
+
+  flashrom_cmd = ['flashrom', '-p', programmer, '-w']
+  futility_cmd = ['futility', 'update', '-p', programmer, '-i']
+
+  return [dut_control_on, dut_control_off, flashrom_cmd, futility_cmd]