| [GENERAL] | |
| APP_CAPTION = NT71871 Flash ROM Code | |
| ;----------------------------------- | |
| ;update code TCON initial flow | |
| ; 0:(default)NT71897 24C32 EEPROM, | |
| ; 1:NT71394 Flash and keep VCOM data, | |
| ; 2:NT71897NB, add device remapping function. | |
| ; 3:NT71392 Flash, FW 8k I2C address offset is 0x2000, | |
| ; 4:NT71870 Flash and keep VCOM data | |
| TCON_INIT_FLOW = 4 | |
| ;----------------------------------- | |
| ; update type, | |
| ; 0: WrDiff -> Chk All, | |
| ; 1: WrAll -> Chk All, | |
| ; 2: WrDiff -> Chk Diff; | |
| ; 3: read FW version only. | |
| UPDATE_TYPE = 1 | |
| TCON_ADDR = 0xC0 | |
| EEPROM_ADDR = 0xC4 | |
| EEPROM_SIZE = 0xC000 | |
| ;----------------------------------- | |
| ; eeprom write and read buffer size, depends on EEPROM spec. | |
| EEPROM_WR_BUF_SIZE = 256 | |
| ;----------------------------------- | |
| ; GUP Type, 0:Auto detect, 1: intel, 2:nVIDIA, 3:ATI | |
| GPU_TYPE = 1 | |
| ;----------------------------------- | |
| ; device type, 0: unknow, 1: invalid value, 2:Internal DP, 3:external DP | |
| DEVICE_TYPE = 2 | |
| ;----------------------------------- | |
| ; the path to save read data. | |
| SAVE_RD_PATH = C:\rd_data.bin | |
| ;----------------------------------- | |
| ; one aux command request bytes | |
| AUX_REQUEST_BYTE = 2 | |
| ;----------------------------------- | |
| ; Try count on failure, note: if MSB is set, it means force retry. | |
| ; FAIL_RETRY_CNT = 0x80001000 | |
| FAIL_RETRY_CNT = 8 | |
| READ_RETRY_CNT = 32 | |
| READ_VERIFY_RETRY_CNT = 3 | |
| ;----------------------------------- | |
| ; ignore few error, 0: false, 1: true | |
| IGNORE_FEW_ERR= 0 | |
| ;----------------------------------- | |
| ; delay of each r/w command | |
| COMMAND_DELAY = 20 | |
| ;----------------------------------- | |
| ; in ms,this value need to be modify according to flash's spec | |
| FLASH_SECTOR_ERASE_TIME = 300 | |
| ;----------------------------------- | |
| ; in ms,this value need to be modify according to flash's spec | |
| FLASH_PAGE_PROG_TIME = 5 | |
| ;----------------------------------- | |
| ; The setting is used for the flash write status register update | |
| FLASH_WRITE_STATUS_REG=0x9C | |
| ;----------------------------------- | |
| ; Reopen graphic library on re-try, 0: false, 1: true | |
| REOPEN_DP_LIB = 1 | |
| ;----------------------------------- | |
| ; Rom code vesion address information, | |
| ;if leave it zoro(default), tool will not show rom code version. | |
| MAJOR_VER_ADDR = 0x7F30 | |
| MINOR_VER_ADDR = 0x7F31 | |
| ;----------------------------------- | |
| ; VCOM code vesion address information,(from V0.15) | |
| ;if leave it zoro(default), tool will not show VCOM code version. | |
| VCOM_ADDR = 0x6B21 | |
| ;----------------------------------- | |
| ; read FW version from panel, MAJOR_VER_ADDR and MINOR_VER_ADDR must valid. | |
| ; 0: read form rom code, 1: read from panel | |
| GET_PANEL_FW_VER = 1 | |
| ;----------------------------------- | |
| ; Whether to show Confirm dialog, 0: Disable, 1: Enable | |
| CONFIRM_DIALOG= 0 | |
| ;----------------------------------- | |
| ; valid when CONFIRM_DIALOG= 1 specify what action can be choice. . | |
| ; Bit0: reboot, Bit1: Shutdown, Bit2: Nothing, default: -1; | |
| ACT_DONE_OPTION = 0xFF | |
| ;----------------------------------- | |
| ; Action when tool update rom code ready. | |
| ; 0: do nothing(default), 1: reboot system, 2: shutdown system | |
| ; note: if CONFIRM_DIALOG is true, the action will replace by dialog select result, if CONFIRM_DIALOG is true, UI can't select | |
| UPDATE_OK_ACTION = 0 | |
| ;----------------------------------- | |
| ; Enable I2C read repeated start with the MOT flag of the I2C Write before it | |
| ; 1: repeated start 0: start | |
| WRITE_MOT_ENABLED= 1 | |
| ;----------------------------------- | |
| ; EDID start address information, (from V0.18.0.209) | |
| ; default value is 0x0000 | |
| EDID_ADDR = 0x8500 | |
| [CODE] | |
| PATH = NT71871_sample_rom.bin |