[GENERAL]
APP_CAPTION = NT71871 Flash ROM Code


;-----------------------------------
;update code TCON initial flow
; 0:(default)NT71897 24C32 EEPROM,
; 1:NT71394 Flash and keep VCOM data,
; 2:NT71897NB, add device remapping function.
; 3:NT71392 Flash, FW 8k I2C address offset is 0x2000,
; 4:NT71870 Flash and keep VCOM data
TCON_INIT_FLOW = 4

;-----------------------------------
; update type,
; 0: WrDiff -> Chk All,
; 1: WrAll -> Chk All,
; 2: WrDiff -> Chk Diff;
; 3: read FW version only.
UPDATE_TYPE  = 1


TCON_ADDR    = 0xC0
EEPROM_ADDR  = 0xC4
EEPROM_SIZE  = 0xC000

;-----------------------------------
; eeprom write and read buffer size, depends on EEPROM spec.
EEPROM_WR_BUF_SIZE = 256

;-----------------------------------
; GUP Type, 0:Auto detect, 1: intel,  2:nVIDIA, 3:ATI
GPU_TYPE = 1

;-----------------------------------
; device type, 0: unknow, 1: invalid value, 2:Internal DP, 3:external DP
DEVICE_TYPE  = 2

;-----------------------------------
;  the path to save read data.
SAVE_RD_PATH = C:\rd_data.bin

;-----------------------------------
;  one aux command request bytes
AUX_REQUEST_BYTE = 2

;-----------------------------------
;  Try count on failure, note: if MSB is set, it means force retry.
; FAIL_RETRY_CNT = 0x80001000
FAIL_RETRY_CNT = 8
READ_RETRY_CNT = 32
READ_VERIFY_RETRY_CNT = 3

;-----------------------------------
; ignore few error, 0: false, 1: true
IGNORE_FEW_ERR= 0

;-----------------------------------
; delay of each r/w command
COMMAND_DELAY = 20

;-----------------------------------
; in ms,this value need to be modify according to flash's spec
FLASH_SECTOR_ERASE_TIME = 300

;-----------------------------------
; in ms,this value need to be modify according to flash's spec
FLASH_PAGE_PROG_TIME = 5

;-----------------------------------
; The setting is used for the flash write status register update
FLASH_WRITE_STATUS_REG=0x9C

;-----------------------------------
; Reopen graphic library on re-try, 0: false, 1: true
REOPEN_DP_LIB = 1

;-----------------------------------
; Rom code vesion address information,
;if leave it zoro(default), tool will not show rom code version.
MAJOR_VER_ADDR = 0x7F30
MINOR_VER_ADDR = 0x7F31


;-----------------------------------
; VCOM code vesion address information,(from V0.15)
;if leave it zoro(default), tool will not show VCOM code version.
VCOM_ADDR = 0x6B21

;-----------------------------------
; read FW version from panel, MAJOR_VER_ADDR and MINOR_VER_ADDR must valid.
; 0: read form rom code, 1: read from panel
GET_PANEL_FW_VER = 1

;-----------------------------------
; Whether to show Confirm dialog, 0: Disable, 1: Enable
CONFIRM_DIALOG= 0

;-----------------------------------
; valid when CONFIRM_DIALOG= 1 specify what action can be choice. .
; Bit0: reboot, Bit1: Shutdown, Bit2: Nothing, default: -1;
ACT_DONE_OPTION = 0xFF


;-----------------------------------
; Action when tool update rom code ready.
; 0: do nothing(default), 1: reboot system, 2: shutdown system
; note: if CONFIRM_DIALOG is true, the action will replace by dialog select result, if CONFIRM_DIALOG is true, UI can't select
UPDATE_OK_ACTION = 0

;-----------------------------------
; Enable I2C read repeated start with the MOT flag of the I2C Write before it
; 1: repeated start 0: start
WRITE_MOT_ENABLED= 1

;-----------------------------------
; EDID start address information, (from V0.18.0.209)
; default value is 0x0000
EDID_ADDR = 0x8500

[CODE]
PATH = NT71871_sample_rom.bin