| /dev/sda: | |
| ATA device, with non-removable media | |
| Model Number: KINGSTON SNS4151S316G | |
| Serial Number: 50026B7238039E80 | |
| Firmware Revision: S9FM01.1 | |
| Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 | |
| Standards: | |
| Supported: 10 9 8 7 6 5 | |
| Likely used: 10 | |
| Configuration: | |
| Logical max current | |
| cylinders 16383 16383 | |
| heads 16 16 | |
| sectors/track 63 63 | |
| -- | |
| CHS current addressable sectors: 16514064 | |
| LBA user addressable sectors: 31277232 | |
| LBA48 user addressable sectors: 31277232 | |
| Logical Sector size: 512 bytes | |
| Physical Sector size: 512 bytes | |
| Logical Sector-0 offset: 0 bytes | |
| device size with M = 1024*1024: 15272 MBytes | |
| device size with M = 1000*1000: 16013 MBytes (16 GB) | |
| cache/buffer size = unknown | |
| Form Factor: 2.5 inch | |
| Nominal Media Rotation Rate: Solid State Device | |
| Capabilities: | |
| LBA, IORDY(can be disabled) | |
| Queue depth: 32 | |
| Standby timer values: spec'd by Standard, no device specific minimum | |
| R/W multiple sector transfer: Max = 16 Current = 16 | |
| Advanced power management level: disabled | |
| DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 | |
| Cycle time: min=120ns recommended=120ns | |
| PIO: pio0 pio1 pio2 pio3 pio4 | |
| Cycle time: no flow control=120ns IORDY flow control=120ns | |
| Commands/features: | |
| Enabled Supported: | |
| * SMART feature set | |
| Security Mode feature set | |
| * Power Management feature set | |
| * Write cache | |
| * Look-ahead | |
| * Host Protected Area feature set | |
| * WRITE_BUFFER command | |
| * READ_BUFFER command | |
| * DOWNLOAD_MICROCODE | |
| Advanced Power Management feature set | |
| SET_MAX security extension | |
| * 48-bit Address feature set | |
| * Device Configuration Overlay feature set | |
| * Mandatory FLUSH_CACHE | |
| * FLUSH_CACHE_EXT | |
| * SMART error logging | |
| * SMART self-test | |
| * General Purpose Logging feature set | |
| * WRITE_{DMA|MULTIPLE}_FUA_EXT | |
| * IDLE_IMMEDIATE with UNLOAD | |
| * WRITE_UNCORRECTABLE_EXT command | |
| * Segmented DOWNLOAD_MICROCODE | |
| * Gen1 signaling speed (1.5Gb/s) | |
| * Gen2 signaling speed (3.0Gb/s) | |
| * Gen3 signaling speed (6.0Gb/s) | |
| * Native Command Queueing (NCQ) | |
| * Host-initiated interface power management | |
| * Phy event counters | |
| * unknown 76[13] | |
| * unknown 76[14] | |
| * DMA Setup Auto-Activate optimization | |
| Device-initiated interface power management | |
| * Software settings preservation | |
| unknown 78[8] | |
| * DOWNLOAD MICROCODE DMA command | |
| * Data Set Management TRIM supported (limit 8 blocks) | |
| Security: | |
| Master password revision code = 65534 | |
| supported | |
| not enabled | |
| not locked | |
| not frozen | |
| not expired: security count | |
| supported: enhanced erase | |
| 2min for SECURITY ERASE UNIT. 60min for ENHANCED SECURITY ERASE UNIT. | |
| Checksum: correct |