| alt_syscall: table 'read_write_test' available. | |
| alt_syscall: table 'android' available. | |
| alt_syscall: table 'android_permissive' available. | |
| alt_syscall: table 'third_party' available. | |
| alt_syscall: table 'third_party_permissive' available. | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
| io scheduler noop registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| pcieport 0000:00:1c.0: enabling device (0100 -> 0103) | |
| pcieport 0000:00:1c.0: irq 309 for MSI/MSI-X | |
| pcieport 0000:00:1c.2: irq 310 for MSI/MSI-X | |
| pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt | |
| pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded | |
| pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt | |
| pci 0000:02:00.0: Signaling PME through PCIe PME interrupt | |
| pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded | |
| pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
| pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ | |
| pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded | |
| pciehp: PCI Express Hot Plug Controller Driver version: 0.4 | |
| intel_idle: MWAIT substates: 0x33000020 | |
| intel_idle: v0.4 model 0x4C | |
| intel_idle: lapic_timer_reliable_states 0xffffffff | |
| ACPI: AC Adapter [AC] (off-line) | |
| input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 | |
| ACPI: Lid Switch [LID0] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 | |
| ACPI: Power Button [PWRB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 | |
| ACPI: Power Button [PWRF] | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| ACPI: Battery Slot [BAT0] (battery absent) | |
| DID VID ffff8800 | |
| DID VID b15d1 | |
| tpm_tis tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16) [gentle shutdown] | |
| [drm] Initialized drm 1.1.0 20060810 | |
| [drm] Memory usable by graphics device = 1024M | |
| i915 0000:00:02.0: irq 311 for MSI/MSI-X | |
| [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [drm] Driver supports precise vblank timestamp query. | |
| [drm] Initialized i915 1.6.0 20150717 for 0000:00:02.0 on minor 0 | |
| [drm] Initialized vgem 1.0.0 20120112 on minor 1 | |
| usbcore: registered new interface driver udl | |
| loop: module loaded | |
| lkdtm: No crash points registered, enable through debugfs | |
| cros_ec_lpcs cros_ec_lpcs.0: Chrome EC device registered | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-pci: EHCI PCI platform driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-pci: OHCI PCI platform driver | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 | |
| xhci_hcd 0000:00:14.0: cache line size of 64 is not supported | |
| xhci_hcd 0000:00:14.0: irq 312 for MSI/MSI-X | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: xHCI Host Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-14597-g61c88fee5b70 xhci-hcd | |
| usb usb1: SerialNumber: 0000:00:14.0 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 7 ports detected | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: xHCI Host Controller | |
| usb usb2: Manufacturer: Linux 3.18.0-14597-g61c88fee5b70 xhci-hcd | |
| usb usb2: SerialNumber: 0000:00:14.0 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 6 ports detected | |
| usbcore: registered new interface driver cdc_acm | |
| cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| usbcore: registered new interface driver usb-storage | |
| usbcore: registered new interface driver ums-realtek | |
| usbcore: registered new interface driver usbserial | |
| usbcore: registered new interface driver usbserial_generic | |
| usbserial: USB Serial support registered for generic | |
| i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 182 | |
| i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp | |
| i8042: Warning: Keylock active | |
| serio: i8042 KBD port at 0x60,0x64 irq 182 | |
| acpi ELAN0000:00: GPIO: looking up 0 in _CRS | |
| rtc_cmos 00:03: RTC can wake from S4 | |
| rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 | |
| rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs | |
| i2c /dev entries driver | |
| proc_thermal 0000:00:0b.0: can't derive routing for PCI INT A | |
| proc_thermal 0000:00:0b.0: PCI INT A: no GSI | |
| proc_thermal 0000:00:0b.0: No auxiliary DTSs enabled | |
| iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 | |
| iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460) | |
| input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 | |
| iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| iTCO_vendor_support: vendor-support=0 | |
| device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com | |
| device-mapper: verity-chromeos: dm-verity-chromeos registered | |
| Intel P-state driver initializing. | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| sdhci-acpi 80860F14:00: No vmmc regulator found | |
| sdhci-acpi 80860F14:00: No vqmmc regulator found | |
| mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA | |
| sdhci_acpi_probe: Enabling QoS on Baytrail eMMC slot | |
| sdhci-acpi INT33BB:01: GPIO lookup for consumer INT33BB:01 cd | |
| sdhci-acpi INT33BB:01: using ACPI for GPIO lookup | |
| acpi INT33BB:01: GPIO: looking up INT33BB:01 cd-gpios | |
| acpi INT33BB:01: GPIO: looking up INT33BB:01 cd-gpio | |
| acpi INT33BB:01: GPIO: looking up 0 in _CRS | |
| sdhci-acpi INT33BB:01: No vmmc regulator found | |
| sdhci-acpi INT33BB:01: No vqmmc regulator found | |
| mmc1: SDHCI controller on ACPI [INT33BB:01] using ADMA | |
| sdhci_acpi_probe: Enabling QoS on Baytrail eMMC slot | |
| gsmi version 1.0 loaded | |
| platform vpd: Driver vpd requests probe deferral | |
| hidraw: raw HID events driver (C) Jiri Kosina | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| ion_chunk_heap_create: base 8388608 size 4194304 align 16384 | |
| ashmem: initialized | |
| chromeos ramoops using acpi device. | |
| console [pstore-1] enabled | |
| pstore: Registered ramoops as persistent store backend | |
| ramoops: attached 0x100000@0x7cc1c000, ecc: 0/0 | |
| intel_rapl: Found RAPL domain package | |
| intel_rapl: Found RAPL domain core | |
| GACT probability NOT on | |
| Netfilter messages via NETLINK v0.30. | |
| nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
| ctnetlink v0.93: registering with nfnetlink. | |
| ip_tables: (C) 2000-2006 Netfilter Core Team | |
| TCP: cubic registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 10 | |
| ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| NET: Registered protocol family 17 | |
| Key type encrypted registered | |
| platform vpd: Driver vpd requests probe deferral | |
| Magic number: 13:156:1004 | |
| input input1: hash matches | |
| i8042 kbd 00:06: hash matches | |
| ALSA device list: | |
| No soundcards found. | |
| Warning: unable to open an initial console. | |
| platform vpd: Driver vpd requests probe deferral | |
| random: nonblocking pool is initialized | |
| input: Elan Touchpad as /devices/platform/808622C1:05/i2c-2/i2c-ELAN0000:00/input/input4 | |
| platform vpd: Driver vpd requests probe deferral | |
| device-mapper: init: attempting early device configuration. | |
| device-mapper: init: adding target '0 3584000 verity payload=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1 hashtree=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1 hashstart=3584000 alg=sha1 root_hexdigest=6672c45c8a0c62f615148a3b5794407954c54fb5 salt=98b98abba87abeac6ce36295dc20e3e35a088869f8cbf5728a9a78df461c3039' | |
| device-mapper: verity: Argument 0: 'payload=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1' | |
| device-mapper: verity: Argument 1: 'hashtree=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1' | |
| device-mapper: verity: Argument 2: 'hashstart=3584000' | |
| device-mapper: verity: Argument 3: 'alg=sha1' | |
| device-mapper: verity: Argument 4: 'root_hexdigest=6672c45c8a0c62f615148a3b5794407954c54fb5' | |
| device-mapper: verity: Argument 5: 'salt=98b98abba87abeac6ce36295dc20e3e35a088869f8cbf5728a9a78df461c3039' | |
| mmc0: BKOPS_EN bit is not set | |
| mmc0: new HS200 MMC card at address 0001 | |
| mmcblk0: mmc0:0001 HAG2e 14.6 GiB | |
| mmcblk0boot0: mmc0:0001 HAG2e partition 1 4.00 MiB | |
| mmcblk0boot1: mmc0:0001 HAG2e partition 2 4.00 MiB | |
| mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB | |
| mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 | |
| platform vpd: Driver vpd requests probe deferral | |
| usb 1-4: new full-speed USB device number 2 using xhci_hcd | |
| tsc: Refined TSC clocksource calibration: 1599.948 MHz | |
| usb 1-4: device descriptor read/64, error -71 | |
| device-mapper: init: dm-0 is ready | |
| EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities | |
| EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem | |
| EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) | |
| VFS: Mounted root (ext2 filesystem) readonly on device 253:0. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 1200K (ffffffff94f04000 - ffffffff95030000) | |
| Write protecting the kernel read-only data: 12288k | |
| Freeing unused kernel memory: 1376K (ffff8800148a8000 - ffff880014a00000) | |
| Freeing unused kernel memory: 1412K (ffff880014c9f000 - ffff880014e00000) | |
| usb 1-4: device descriptor read/64, error -71 | |
| audit: type=1404 audit(1503349059.609:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 | |
| SELinux: 2048 avtab hash slots, 7360 rules. | |
| SELinux: 2048 avtab hash slots, 7360 rules. | |
| SELinux: 1 users, 2 roles, 682 types, 0 bools, 1 sens, 1024 cats | |
| SELinux: 63 classes, 7360 rules | |
| SELinux: Completing initialization. | |
| SELinux: Setting up existing superblocks. | |
| SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts | |
| SELinux: initialized (dev bdev, type bdev), not configured for labeling | |
| SELinux: initialized (dev proc, type proc), uses genfs_contexts | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs | |
| SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts | |
| SELinux: initialized (dev sockfs, type sockfs), uses task SIDs | |
| SELinux: initialized (dev pipefs, type pipefs), uses task SIDs | |
| SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling | |
| SELinux: initialized (dev securityfs, type securityfs), not configured for labeling | |
| SELinux: initialized (dev aio, type aio), not configured for labeling | |
| SELinux: initialized (dev devpts, type devpts), uses transition SIDs | |
| SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts | |
| SELinux: initialized (dev drm, type drm), not configured for labeling | |
| SELinux: initialized (dev dm-0, type ext2), uses xattr | |
| SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts | |
| audit: type=1403 audit(1503349059.649:3): policy loaded auid=4294967295 ses=4294967295 | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| udevd[119]: starting version 225 | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required. | |
| usb 1-4: new full-speed USB device number 3 using xhci_hcd | |
| Chromium OS LSM: dev(253,0): read-only | |
| Chromium OS LSM: module locking engaged. | |
| Chromium OS LSM: init_module locked obj="/lib/modules/3.18.0-14597-g61c88fee5b70/kernel/drivers/input/joydev.ko" pid=147 cmdline="udevd --daemon" | |
| usb 1-4: device descriptor read/64, error -71 | |
| Switched to clocksource tsc | |
| usb 1-4: device descriptor read/64, error -71 | |
| /dev/pts/0 | |
| [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 | |
| usb 1-4: new full-speed USB device number 4 using xhci_hcd | |
| usb 1-4: Device not responding to setup address. | |
| EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600 | |
| SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr | |
| EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) | |
| SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr | |
| usb 1-4: Device not responding to setup address. | |
| frecon(214): No monitor available, running headless! | |
| DEBUG: tsm_screen: new screen | |
| DEBUG: tsm_vte: new vte object | |
| frecon(214): term_show_image failed: -1:Unknown error -1. | |
| frecon(214): Cannot get DBUS connection | |
| frecon(214): Splash_run failed: -1. | |
| EXT4-fs (dm-1): recovery complete | |
| usb 1-4: device not accepting address 4, error -71 | |
| EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,commit=600 | |
| SELinux: initialized (dev dm-1, type ext4), uses xattr | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev pstore, type pstore), uses genfs_contexts | |
| SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Intel(R) Wireless WiFi driver for Linux | |
| Copyright(c) 2003- 2015 Intel Corporation | |
| iwlwifi 0000:02:00.0: irq 313 for MSI/MSI-X | |
| iwlwifi 0000:02:00.0: Direct firmware load for iwl-dbg-cfg.ini failed with error -2 | |
| ... | |
| device-mapper: init: adding target '0 3584000 verity payload=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1 hashtree=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1 hashstart=3584000 alg=sha1 root_hexdigest=6672c45c8a0c62f615148a3b5794407954c54fb5 salt=98b98abba87abeac6ce36295dc20e3e35a088869f8cbf5728a9a78df461c3039' | |
| device-mapper: verity: Argument 0: 'payload=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1' | |
| device-mapper: verity: Argument 1: 'hashtree=PARTUUID=ae627e62-7172-a944-a3b3-7130a9e502c9/PARTNROFF=1' | |
| device-mapper: verity: Argument 2: 'hashstart=3584000' | |
| device-mapper: verity: Argument 3: 'alg=sha1' | |
| device-mapper: verity: Argument 4: 'root_hexdigest=6672c45c8a0c62f615148a3b5794407954c54fb5' | |
| device-mapper: verity: Argument 5: 'salt=98b98abba87abeac6ce36295dc20e3e35a088869f8cbf5728a9a78df461c3039' | |
| mmc0: BKOPS_EN bit is not set | |
| mmc0: new HS200 MMC card at address 0001 | |
| mmcblk0: mmc0:0001 HAG2e 14.6 GiB | |
| mmcblk0boot0: mmc0:0001 HAG2e partition 1 4.00 MiB | |
| mmcblk0boot1: mmc0:0001 HAG2e partition 2 4.00 MiB | |
| mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB | |
| mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 | |
| platform vpd: Driver vpd requests probe deferral | |
| usb 1-4: new full-speed USB device number 2 using xhci_hcd | |
| tsc: Refined TSC clocksource calibration: 1599.948 MHz | |
| usb 1-4: device descriptor read/64, error -71 | |
| device-mapper: init: dm-0 is ready | |
| EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities | |
| EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem | |
| EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) | |
| VFS: Mounted root (ext2 filesystem) readonly on device 253:0. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 1200K (ffffffff8db04000 - ffffffff8dc30000) | |
| Write protecting the kernel read-only data: 12288k | |
| Freeing unused kernel memory: 1376K (ffff88000d4a8000 - ffff88000d600000) | |
| Freeing unused kernel memory: 1412K (ffff88000d89f000 - ffff88000da00000) | |
| audit: type=1404 audit(1503387906.589:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 | |
| usb 1-4: device descriptor read/64, error -71 | |
| SELinux: 2048 avtab hash slots, 7360 rules. | |
| SELinux: 2048 avtab hash slots, 7360 rules. | |
| SELinux: 1 users, 2 roles, 682 types, 0 bools, 1 sens, 1024 cats | |
| SELinux: 63 classes, 7360 rules | |
| SELinux: Completing initialization. | |
| SELinux: Setting up existing superblocks. | |
| SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts | |
| SELinux: initialized (dev bdev, type bdev), not configured for labeling | |
| SELinux: initialized (dev proc, type proc), uses genfs_contexts | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs | |
| SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts | |
| SELinux: initialized (dev sockfs, type sockfs), uses task SIDs | |
| SELinux: initialized (dev pipefs, type pipefs), uses task SIDs | |
| SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling | |
| SELinux: initialized (dev securityfs, type securityfs), not configured for labeling | |
| SELinux: initialized (dev aio, type aio), not configured for labeling | |
| SELinux: initialized (dev devpts, type devpts), uses transition SIDs | |
| SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts | |
| SELinux: initialized (dev drm, type drm), not configured for labeling | |
| SELinux: initialized (dev dm-0, type ext2), uses xattr | |
| SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts | |
| audit: type=1403 audit(1503387906.627:3): policy loaded auid=4294967295 ses=4294967295 | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| udevd[119]: starting version 225 | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required. | |
| usb 1-4: new full-speed USB device number 3 using xhci_hcd | |
| Chromium OS LSM: dev(253,0): read-only | |
| Chromium OS LSM: module locking engaged. | |
| Chromium OS LSM: init_module locked obj="/lib/modules/3.18.0-14597-g61c88fee5b70/kernel/drivers/input/joydev.ko" pid=149 cmdline="udevd --daemon" | |
| usb 1-4: device descriptor read/64, error -71 | |
| EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended | |
| EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600 | |
| SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr | |
| EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) | |
| SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr | |
| /dev/pts/0 | |
| Switched to clocksource tsc | |
| usb 1-4: device descriptor read/64, error -71 | |
| [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 | |
| EXT4-fs (dm-1): recovery complete | |
| EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,commit=600 | |
| SELinux: initialized (dev dm-1, type ext4), uses xattr | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs | |
| SELinux: initialized (dev pstore, type pstore), uses genfs_contexts | |
| SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts | |
| usb 1-4: new full-speed USB device number 4 using xhci_hcd | |
| usb 1-4: Device not responding to setup address. | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |