| # Copyright 1999-2022 Gentoo Authors |
| # Distributed under the terms of the GNU General Public License v2 |
| |
| EAPI=7 |
| TMPFILES_OPTIONAL=1 |
| inherit autotools linux-info systemd toolchain-funcs tmpfiles udev flag-o-matic |
| |
| DESCRIPTION="User-land utilities for LVM2 (device-mapper) software" |
| HOMEPAGE="https://sourceware.org/lvm2/" |
| SRC_URI="ftp://sourceware.org/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz |
| ftp://sourceware.org/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz" |
| |
| LICENSE="GPL-2" |
| SLOT="0" |
| KEYWORDS="*" |
| IUSE="readline static static-libs systemd lvm2create-initrd sanlock selinux +udev +thin device-mapper-only" |
| REQUIRED_USE="device-mapper-only? ( !lvm2create-initrd !sanlock !thin ) |
| static? ( !systemd !udev ) |
| static-libs? ( static !udev ) |
| systemd? ( udev )" |
| |
| DEPEND_COMMON=" |
| dev-libs/libaio[static-libs?] |
| static? ( dev-libs/libaio[static-libs] ) |
| !static? ( dev-libs/libaio[static-libs?] ) |
| readline? ( sys-libs/readline:0= ) |
| sanlock? ( sys-cluster/sanlock ) |
| systemd? ( >=sys-apps/systemd-205:0= ) |
| udev? ( >=virtual/libudev-208:= )" |
| # /run is now required for locking during early boot. /var cannot be assumed to |
| # be available -- thus, pull in recent enough baselayout for /run. |
| # This version of LVM is incompatible with cryptsetup <1.1.2. |
| RDEPEND="${DEPEND_COMMON} |
| >=sys-apps/baselayout-2.2 |
| >=sys-apps/util-linux-2.16 |
| lvm2create-initrd? ( sys-apps/makedev ) |
| !device-mapper-only? ( virtual/tmpfiles ) |
| thin? ( >=sys-block/thin-provisioning-tools-0.3.0 )" |
| # note: thin- 0.3.0 is required to avoid --disable-thin_check_needs_check |
| DEPEND="${DEPEND_COMMON} |
| static? ( |
| readline? ( sys-libs/readline[static-libs] ) |
| selinux? ( sys-libs/libselinux[static-libs] ) |
| >=sys-apps/util-linux-2.16[static-libs] |
| )" |
| BDEPEND=" |
| sys-devel/autoconf-archive |
| virtual/pkgconfig |
| " |
| |
| S="${WORKDIR}/${PN/lvm/LVM}.${PV}" |
| |
| PATCHES=( |
| # Gentoo specific modification(s): |
| "${FILESDIR}"/${PN}-2.03.06-example.conf.in.patch |
| |
| # For upstream -- review and forward: |
| #"${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch # FIXME: breaks libdm/dm-tools build |
| "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch |
| "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331 |
| "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373 |
| #"${FILESDIR}"/${PN}-2.02.178-asneeded.patch # -Wl,--as-needed |
| "${FILESDIR}"/${PN}-2.03.12-dynamic-static-ldflags.patch #332905 |
| "${FILESDIR}"/${PN}-2.03.14-static-pkgconfig-libs.patch #370217, #439414 + blkid |
| "${FILESDIR}"/${PN}-2.03.12-static-pkgconfig-libs-2.patch |
| "${FILESDIR}"/${PN}-2.03.05-pthread-pkgconfig.patch #492450 |
| "${FILESDIR}"/${PN}-2.03.12-static-libm.patch #617756 |
| "${FILESDIR}"/${PN}-2.02.166-HPPA-no-O_DIRECT.patch #657446 |
| #"${FILESDIR}"/${PN}-2.02.145-mkdev.patch #580062 # Merged upstream |
| "${FILESDIR}"/${PN}-2.03.05-dmeventd-no-idle-exit.patch |
| #"${FILESDIR}"/${PN}-2.02.184-allow-reading-metadata-with-invalid-creation_time.patch #682380 # merged upstream |
| "${FILESDIR}"/${PN}-2.02.184-mksh_build.patch #686652 |
| "${FILESDIR}"/${PN}-2.03.14-r1-add-fcntl.patch |
| "${FILESDIR}"/${PN}-2.03.14-r1-fopen-to-freopen.patch |
| "${FILESDIR}"/${PN}-2.03.14-r1-mallinfo.patch |
| "${FILESDIR}"/${PN}-2.03.14-freopen_n2.patch |
| ) |
| |
| pkg_setup() { |
| local CONFIG_CHECK="~SYSVIPC" |
| |
| if use udev; then |
| local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required for udev sync)\n" |
| if linux_config_exists; then |
| local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH) |
| if [[ -n "${uevent_helper_path}" ]] && [[ "${uevent_helper_path}" != '""' ]]; then |
| ewarn "It's recommended to set an empty value to the following kernel config option:" |
| ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}" |
| fi |
| fi |
| fi |
| |
| check_extra_config |
| |
| # 1. Genkernel no longer copies /sbin/lvm blindly. |
| if use static; then |
| elog "Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with" |
| elog "their static versions. If you need the static binaries," |
| elog "you must append .static to the filename!" |
| fi |
| } |
| |
| src_prepare() { |
| default |
| |
| # Users without systemd get no auto-activation of any logical volume |
| if ! use systemd ; then |
| eapply "${FILESDIR}"/${PN}-2.03.14-dm_lvm_rules_no_systemd.patch |
| fi |
| |
| sed -i \ |
| -e "1iAR = $(tc-getAR)" \ |
| -e "s:CC ?= @CC@:CC = $(tc-getCC):" \ |
| make.tmpl.in || die #444082 |
| |
| sed -i -e '/FLAG/s:-O2::' configure{.ac,} || die #480212 |
| |
| sed -i -e "s:/usr/bin/true:$(type -P true):" scripts/blk_availability_systemd_red_hat.service.in || die #517514 |
| |
| # Don't install thin man page when not requested |
| if ! use thin ; then |
| sed -i -e 's/^\(MAN7+=.*\) $(LVMTHINMAN) \(.*\)$/\1 \2/' man/Makefile.in || die |
| fi |
| |
| eautoreconf |
| } |
| |
| src_configure() { |
| filter-flags -flto |
| |
| # Workaround for bug #822210 |
| tc-ld-disable-gold |
| |
| local myeconfargs=() |
| |
| # Most of this package does weird stuff. |
| # The build options are tristate, and --without is NOT supported |
| # options: 'none', 'internal', 'shared' |
| myeconfargs+=( |
| $(use_enable !device-mapper-only dmfilemapd) |
| $(use_enable !device-mapper-only dmeventd) |
| $(use_enable !device-mapper-only cmdlib) |
| $(use_enable !device-mapper-only fsadm) |
| $(use_enable !device-mapper-only lvmpolld) |
| $(usex device-mapper-only --disable-udev-systemd-background-jobs '') |
| |
| # This only causes the .static versions to become available |
| $(usex static --enable-static_link '') |
| |
| # dmeventd requires mirrors to be internal, and snapshot available |
| # so we cannot disable them |
| --with-mirrors="$(usex device-mapper-only none internal)" |
| --with-snapshots="$(usex device-mapper-only none internal)" |
| |
| # disable O_DIRECT support on hppa, breaks pv detection (#99532) |
| $(usex hppa --disable-o_direct '') |
| ) |
| |
| if use thin; then |
| myeconfargs+=( --with-thin=internal --with-cache=internal ) |
| local texec |
| for texec in check dump repair restore; do |
| myeconfargs+=( --with-thin-${texec}="${EPREFIX}"/sbin/thin_${texec} ) |
| myeconfargs+=( --with-cache-${texec}="${EPREFIX}"/sbin/cache_${texec} ) |
| done |
| else |
| myeconfargs+=( --with-thin=none --with-cache=none ) |
| fi |
| |
| myeconfargs+=( |
| $(use_enable readline) |
| $(use_enable selinux) |
| --enable-pkgconfig |
| --with-confdir="${EPREFIX}"/etc |
| --exec-prefix="${EPREFIX}" |
| --sbindir="${EPREFIX}/sbin" |
| --with-staticdir="${EPREFIX}"/sbin |
| --libdir="${EPREFIX}/$(get_libdir)" |
| --with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" |
| --with-default-dm-run-dir=/run |
| --with-default-run-dir=/run/lvm |
| --with-default-locking-dir=/run/lock/lvm |
| --with-default-pid-dir=/run |
| $(use_enable udev udev_rules) |
| $(use_enable udev udev_sync) |
| $(use_with udev udevdir "${EPREFIX}$(get_udevdir)"/rules.d) |
| $(use_enable sanlock lvmlockd-sanlock) |
| $(use_enable systemd udev-systemd-background-jobs) |
| $(use_enable systemd notify-dbus) |
| --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" |
| CLDFLAGS="${LDFLAGS}" |
| ) |
| # Hard-wire this to bash as some shells (dash) don't know |
| # "-o pipefail" #682404 |
| CONFIG_SHELL="/bin/bash" \ |
| econf "${myeconfargs[@]}" |
| } |
| |
| src_compile() { |
| pushd include >/dev/null |
| emake V=1 |
| popd >/dev/null |
| |
| if use device-mapper-only ; then |
| emake V=1 device-mapper |
| else |
| emake V=1 |
| emake V=1 CC="$(tc-getCC)" -C scripts lvm2_activation_generator_systemd_red_hat |
| fi |
| } |
| |
| src_test() { |
| einfo "Tests are disabled because of device-node mucking, if you want to" |
| einfo "run tests, compile the package and see ${S}/tests" |
| } |
| |
| src_install() { |
| local inst |
| local INSTALL_TARGETS=( install install_tmpfiles_configuration ) |
| # install systemd related files only when requested, bug #522430 |
| use systemd && INSTALL_TARGETS+=( SYSTEMD_GENERATOR_DIR="$(systemd_get_systemgeneratordir)" install_systemd_units install_systemd_generators ) |
| use device-mapper-only && INSTALL_TARGETS=( install_device-mapper ) |
| emake V=1 DESTDIR="${D}" "${INSTALL_TARGETS[@]}" |
| |
| newinitd "${FILESDIR}"/device-mapper.rc-2.02.105-r2 device-mapper |
| newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper |
| |
| if use !device-mapper-only ; then |
| newinitd "${FILESDIR}"/dmeventd.initd-2.02.184-r2 dmeventd |
| newinitd "${FILESDIR}"/lvm.rc-2.02.187 lvm |
| newconfd "${FILESDIR}"/lvm.confd-2.02.184-r3 lvm |
| if ! use udev ; then |
| # We keep the variable but remove udev from it. |
| sed -r -i \ |
| -e '/^rc_need=/s/\<udev\>//g' \ |
| "${ED}/etc/conf.d/lvm" || die "Could not drop udev from rc_need" |
| fi |
| |
| newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.105-r2 lvm-monitoring |
| newinitd "${FILESDIR}"/lvmpolld.initd-2.02.183 lvmpolld |
| fi |
| |
| if use sanlock; then |
| newinitd "${FILESDIR}"/lvmlockd.initd-2.02.166-r1 lvmlockd |
| fi |
| |
| if use static-libs; then |
| dolib.a libdm/ioctl/libdevmapper.a |
| if use !device-mapper-only; then |
| # depends on lvmetad |
| dolib.a libdaemon/client/libdaemonclient.a #462908 |
| # depends on dmeventd |
| dolib.a daemons/dmeventd/libdevmapper-event.a |
| fi |
| else |
| rm -f "${ED}"/usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a |
| fi |
| |
| if use lvm2create-initrd; then |
| dosbin scripts/lvm2create_initrd/lvm2create_initrd |
| doman scripts/lvm2create_initrd/lvm2create_initrd.8 |
| newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd |
| fi |
| |
| insinto /etc |
| doins "${FILESDIR}"/dmtab |
| |
| dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf |
| } |
| |
| pkg_postinst() { |
| if ! use device-mapper-only; then |
| tmpfiles_process lvm2.conf |
| fi |
| |
| if use udev; then |
| udev_reload |
| fi |
| |
| if [[ -z "${REPLACING_VERSIONS}" ]]; then |
| # This is a new installation |
| ewarn "Make sure the \"lvm\" init script is in the runlevels:" |
| ewarn "# rc-update add lvm boot" |
| ewarn |
| ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want" |
| ewarn "to enable lvm autoactivation and metadata caching." |
| fi |
| |
| if use udev && [[ -d /run ]] ; then |
| local permission_run_expected="drwxr-xr-x" |
| local permission_run=$(stat -c "%A" /run) |
| if [[ "${permission_run}" != "${permission_run_expected}" ]] ; then |
| ewarn "Found the following problematic permissions:" |
| ewarn "" |
| ewarn " ${permission_run} /run" |
| ewarn "" |
| ewarn "Expected:" |
| ewarn "" |
| ewarn " ${permission_run_expected} /run" |
| ewarn "" |
| ewarn "This is known to be causing problems for UDEV-enabled LVM services." |
| fi |
| fi |
| } |
| |
| pkg_postrm() { |
| if use udev && [[ -z ${REPLACED_BY_VERSION} ]]; then |
| udev_reload |
| fi |
| } |