blob: 0e5234a5ca2247bb76efa83083307a63f2200bf1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for Marvell Xenon SDHC as a platform device
*
* Copyright (C) 2016 Marvell, All Rights Reserved.
*
* Author: Hu Ziji <huziji@marvell.com>
* Date: 2016-8-24
*
* Inspired by Jisheng Zhang <jszhang@marvell.com>
* Special thanks to Video BG4 project team.
*/
#include <linux/delay.h>
#include <linux/ktime.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include "sdhci-pltfm.h"
#include "sdhci-xenon.h"
static int xenon_enable_internal_clk(struct sdhci_host *host)
{
u32 reg;
ktime_t timeout;
reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
reg |= SDHCI_CLOCK_INT_EN;
sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
/* Wait max 20 ms */
timeout = ktime_add_ms(ktime_get(), 20);
while (1) {
bool timedout = ktime_after(ktime_get(), timeout);
reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
if (reg & SDHCI_CLOCK_INT_STABLE)
break;
if (timedout) {
dev_err(mmc_dev(host->mmc), "Internal clock never stabilised.\n");
return -ETIMEDOUT;
}
usleep_range(900, 1100);
}
return 0;
}
/* Set SDCLK-off-while-idle */
static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
unsigned char sdhc_id, bool enable)
{
u32 reg;
u32 mask;
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
/* Get the bit shift basing on the SDHC index */
mask = (0x1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
if (enable)
reg |= mask;
else
reg &= ~mask;
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
}
/* Enable/Disable the Auto Clock Gating function */
static void xenon_set_acg(struct sdhci_host *host, bool enable)
{
u32 reg;
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
if (enable)
reg &= ~XENON_AUTO_CLKGATE_DISABLE_MASK;
else
reg |= XENON_AUTO_CLKGATE_DISABLE_MASK;
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
}
/* Enable this SDHC */
static void xenon_enable_sdhc(struct sdhci_host *host,
unsigned char sdhc_id)
{
u32 reg;
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
reg |= (BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
/*
* Force to clear BUS_TEST to
* skip bus_test_pre and bus_test_post
*/
host->mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
}
/* Disable this SDHC */
static void xenon_disable_sdhc(struct sdhci_host *host,
unsigned char sdhc_id)
{
u32 reg;
reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
reg &= ~(BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
}
/* Enable Parallel Transfer Mode */
static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
unsigned char sdhc_id)
{
u32 reg;
reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
reg |= BIT(sdhc_id);
sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
}
/* Mask command conflict error */
static void xenon_mask_cmd_conflict_err(struct sdhci_host *host)
{
u32 reg;
reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
reg |= XENON_MASK_CMD_CONFLICT_ERR;
sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
}
static void xenon_retune_setup(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
u32 reg;
/* Disable the Re-Tuning Request functionality */
reg = sdhci_readl(host, XENON_SLOT_RETUNING_REQ_CTRL);
reg &= ~XENON_RETUNING_COMPATIBLE;
sdhci_writel(host, reg, XENON_SLOT_RETUNING_REQ_CTRL);
/* Disable the Re-tuning Interrupt */
reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
reg &= ~SDHCI_INT_RETUNE;
sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
reg = sdhci_readl(host, SDHCI_INT_ENABLE);
reg &= ~SDHCI_INT_RETUNE;
sdhci_writel(host, reg, SDHCI_INT_ENABLE);
/* Force to use Tuning Mode 1 */
host->tuning_mode = SDHCI_TUNING_MODE_1;
/* Set re-tuning period */
host->tuning_count = 1 << (priv->tuning_count - 1);
}
/*
* Operations inside struct sdhci_ops
*/
/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
static void xenon_reset_exit(struct sdhci_host *host,
unsigned char sdhc_id, u8 mask)
{
/* Only SOFTWARE RESET ALL will clear the register setting */
if (!(mask & SDHCI_RESET_ALL))
return;
/* Disable tuning request and auto-retuning again */
xenon_retune_setup(host);
/*
* The ACG should be turned off at the early init time, in order
* to solve a possible issues with the 1.8V regulator stabilization.
* The feature is enabled in later stage.
*/
xenon_set_acg(host, false);
xenon_set_sdclk_off_idle(host, sdhc_id, false);
xenon_mask_cmd_conflict_err(host);
}
static void xenon_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
sdhci_reset(host, mask);
xenon_reset_exit(host, priv->sdhc_id, mask);
}
/*
* Xenon defines different values for HS200 and HS400
* in Host_Control_2
*/
static void xenon_set_uhs_signaling(struct sdhci_host *host,
unsigned int timing)
{
u16 ctrl_2;
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
/* Select Bus Speed Mode for host */
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
if (timing == MMC_TIMING_MMC_HS200)
ctrl_2 |= XENON_CTRL_HS200;
else if (timing == MMC_TIMING_UHS_SDR104)
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
else if (timing == MMC_TIMING_UHS_SDR12)
ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
else if (timing == MMC_TIMING_UHS_SDR25)
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
else if (timing == MMC_TIMING_UHS_SDR50)
ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
else if ((timing == MMC_TIMING_UHS_DDR50) ||
(timing == MMC_TIMING_MMC_DDR52))
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
else if (timing == MMC_TIMING_MMC_HS400)
ctrl_2 |= XENON_CTRL_HS400;
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
unsigned short vdd)
{
struct mmc_host *mmc = host->mmc;
u8 pwr = host->pwr;
sdhci_set_power_noreg(host, mode, vdd);
if (host->pwr == pwr)
return;
if (host->pwr == 0)
vdd = 0;
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
static void xenon_voltage_switch(struct sdhci_host *host)
{
/* Wait for 5ms after set 1.8V signal enable bit */
usleep_range(5000, 5500);
/*
* For some reason the controller's Host Control2 register reports
* the bit representing 1.8V signaling as 0 when read after it was
* written as 1. Subsequent read reports 1.
*
* Since this may cause some issues, do an empty read of the Host
* Control2 register here to circumvent this.
*/
sdhci_readw(host, SDHCI_HOST_CONTROL2);
}
static const struct sdhci_ops sdhci_xenon_ops = {
.voltage_switch = xenon_voltage_switch,
.set_clock = sdhci_set_clock,
.set_power = xenon_set_power,
.set_bus_width = sdhci_set_bus_width,
.reset = xenon_reset,
.set_uhs_signaling = xenon_set_uhs_signaling,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
.ops = &sdhci_xenon_ops,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
};
/*
* Xenon Specific Operations in mmc_host_ops
*/
static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
u32 reg;
/*
* HS400/HS200/eMMC HS doesn't have Preset Value register.
* However, sdhci_set_ios will read HS400/HS200 Preset register.
* Disable Preset Value register for HS400/HS200.
* eMMC HS with preset_enabled set will trigger a bug in
* get_preset_value().
*/
if ((ios->timing == MMC_TIMING_MMC_HS400) ||
(ios->timing == MMC_TIMING_MMC_HS200) ||
(ios->timing == MMC_TIMING_MMC_HS)) {
host->preset_enabled = false;
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
host->flags &= ~SDHCI_PV_ENABLED;
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
} else {
host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
}
sdhci_set_ios(mmc, ios);
xenon_phy_adj(host, ios);
if (host->clock > XENON_DEFAULT_SDCLK_FREQ)
xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
}
static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
/*
* Before SD/SDIO set signal voltage, SD bus clock should be
* disabled. However, sdhci_set_clock will also disable the Internal
* clock in mmc_set_signal_voltage().
* If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
* Thus here manually enable internal clock.
*
* After switch completes, it is unnecessary to disable internal clock,
* since keeping internal clock active obeys SD spec.
*/
xenon_enable_internal_clk(host);
xenon_soc_pad_ctrl(host, ios->signal_voltage);
/*
* If Vqmmc is fixed on platform, vqmmc regulator should be unavailable.
* Thus SDHCI_CTRL_VDD_180 bit might not work then.
* Skip the standard voltage switch to avoid any issue.
*/
if (PTR_ERR(mmc->supply.vqmmc) == -ENODEV)
return 0;
return sdhci_start_signal_voltage_switch(mmc, ios);
}
/*
* Update card type.
* priv->init_card_type will be used in PHY timing adjustment.
*/
static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
{
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
/* Update card type*/
priv->init_card_type = card->type;
}
static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct sdhci_host *host = mmc_priv(mmc);
if (host->timing == MMC_TIMING_UHS_DDR50 ||
host->timing == MMC_TIMING_MMC_DDR52)
return 0;
/*
* Currently force Xenon driver back to support mode 1 only,
* even though Xenon might claim to support mode 2 or mode 3.
* It requires more time to test mode 2/mode 3 on more platforms.
*/
if (host->tuning_mode != SDHCI_TUNING_MODE_1)
xenon_retune_setup(host);
return sdhci_execute_tuning(mmc, opcode);
}
static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
u32 reg;
u8 sdhc_id = priv->sdhc_id;
sdhci_enable_sdio_irq(mmc, enable);
if (enable) {
/*
* Set SDIO Card Inserted indication
* to enable detecting SDIO async irq.
*/
reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
reg |= (1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
} else {
/* Clear SDIO Card Inserted indication */
reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
reg &= ~(1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
}
}
static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
{
host->mmc_host_ops.set_ios = xenon_set_ios;
host->mmc_host_ops.start_signal_voltage_switch =
xenon_start_signal_voltage_switch;
host->mmc_host_ops.init_card = xenon_init_card;
host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
}
/*
* Parse Xenon specific DT properties:
* sdhc-id: the index of current SDHC.
* Refer to XENON_SYS_CFG_INFO register
* tun-count: the interval between re-tuning
*/
static int xenon_probe_dt(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct mmc_host *mmc = host->mmc;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
u32 sdhc_id, nr_sdhc;
u32 tuning_count;
/* Disable HS200 on Armada AP806 */
if (of_device_is_compatible(np, "marvell,armada-ap806-sdhci"))
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
sdhc_id = 0x0;
if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO);
nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK;
if (unlikely(sdhc_id > nr_sdhc)) {
dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n",
sdhc_id, nr_sdhc);
return -EINVAL;
}
}
priv->sdhc_id = sdhc_id;
tuning_count = XENON_DEF_TUNING_COUNT;
if (!of_property_read_u32(np, "marvell,xenon-tun-count",
&tuning_count)) {
if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) {
dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
XENON_DEF_TUNING_COUNT);
tuning_count = XENON_DEF_TUNING_COUNT;
}
}
priv->tuning_count = tuning_count;
return xenon_phy_parse_dt(np, host);
}
static int xenon_sdhc_prepare(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
u8 sdhc_id = priv->sdhc_id;
/* Enable SDHC */
xenon_enable_sdhc(host, sdhc_id);
/* Enable ACG */
xenon_set_acg(host, true);
/* Enable Parallel Transfer Mode */
xenon_enable_sdhc_parallel_tran(host, sdhc_id);
/* Disable SDCLK-Off-While-Idle before card init */
xenon_set_sdclk_off_idle(host, sdhc_id, false);
xenon_mask_cmd_conflict_err(host);
return 0;
}
static void xenon_sdhc_unprepare(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
u8 sdhc_id = priv->sdhc_id;
/* disable SDHC */
xenon_disable_sdhc(host, sdhc_id);
}
static int xenon_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_host *host;
struct xenon_priv *priv;
int err;
host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
sizeof(struct xenon_priv));
if (IS_ERR(host))
return PTR_ERR(host);
pltfm_host = sdhci_priv(host);
priv = sdhci_pltfm_priv(pltfm_host);
/*
* Link Xenon specific mmc_host_ops function,
* to replace standard ones in sdhci_ops.
*/
xenon_replace_mmc_host_ops(host);
pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
if (IS_ERR(pltfm_host->clk)) {
err = PTR_ERR(pltfm_host->clk);
dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
goto free_pltfm;
}
err = clk_prepare_enable(pltfm_host->clk);
if (err)
goto free_pltfm;
priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
if (IS_ERR(priv->axi_clk)) {
err = PTR_ERR(priv->axi_clk);
if (err == -EPROBE_DEFER)
goto err_clk;
} else {
err = clk_prepare_enable(priv->axi_clk);
if (err)
goto err_clk;
}
err = mmc_of_parse(host->mmc);
if (err)
goto err_clk_axi;
sdhci_get_of_property(pdev);
xenon_set_acg(host, false);
/* Xenon specific dt parse */
err = xenon_probe_dt(pdev);
if (err)
goto err_clk_axi;
err = xenon_sdhc_prepare(host);
if (err)
goto err_clk_axi;
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_suspend_ignore_children(&pdev->dev, 1);
err = sdhci_add_host(host);
if (err)
goto remove_sdhc;
pm_runtime_put_autosuspend(&pdev->dev);
return 0;
remove_sdhc:
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
xenon_sdhc_unprepare(host);
err_clk_axi:
clk_disable_unprepare(priv->axi_clk);
err_clk:
clk_disable_unprepare(pltfm_host->clk);
free_pltfm:
sdhci_pltfm_free(pdev);
return err;
}
static int xenon_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
pm_runtime_get_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
sdhci_remove_host(host, 0);
xenon_sdhc_unprepare(host);
clk_disable_unprepare(priv->axi_clk);
clk_disable_unprepare(pltfm_host->clk);
sdhci_pltfm_free(pdev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int xenon_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
int ret;
ret = pm_runtime_force_suspend(dev);
priv->restore_needed = true;
return ret;
}
#endif
#ifdef CONFIG_PM
static int xenon_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
int ret;
ret = sdhci_runtime_suspend_host(host);
if (ret)
return ret;
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
mmc_retune_needed(host->mmc);
clk_disable_unprepare(pltfm_host->clk);
/*
* Need to update the priv->clock here, or when runtime resume
* back, phy don't aware the clock change and won't adjust phy
* which will cause cmd err
*/
priv->clock = 0;
return 0;
}
static int xenon_runtime_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
int ret;
ret = clk_prepare_enable(pltfm_host->clk);
if (ret) {
dev_err(dev, "can't enable mainck\n");
return ret;
}
if (priv->restore_needed) {
ret = xenon_sdhc_prepare(host);
if (ret)
goto out;
priv->restore_needed = false;
}
ret = sdhci_runtime_resume_host(host, 0);
if (ret)
goto out;
return 0;
out:
clk_disable_unprepare(pltfm_host->clk);
return ret;
}
#endif /* CONFIG_PM */
static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xenon_suspend,
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(xenon_runtime_suspend,
xenon_runtime_resume,
NULL)
};
static const struct of_device_id sdhci_xenon_dt_ids[] = {
{ .compatible = "marvell,armada-ap806-sdhci",},
{ .compatible = "marvell,armada-cp110-sdhci",},
{ .compatible = "marvell,armada-3700-sdhci",},
{}
};
MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
static struct platform_driver sdhci_xenon_driver = {
.driver = {
.name = "xenon-sdhci",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_xenon_dt_ids,
.pm = &sdhci_xenon_dev_pm_ops,
},
.probe = xenon_probe,
.remove = xenon_remove,
};
module_platform_driver(sdhci_xenon_driver);
MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>");
MODULE_LICENSE("GPL v2");