blob: 1c4264637a41236c99d210ab9a40566562cb70a6 [file] [log] [blame]
/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
*/
#ifndef ATH11K_RX_DESC_H
#define ATH11K_RX_DESC_H
enum rx_desc_rxpcu_filter {
RX_DESC_RXPCU_FILTER_PASS,
RX_DESC_RXPCU_FILTER_MONITOR_CLIENT,
RX_DESC_RXPCU_FILTER_MONITOR_OTHER,
};
/* rxpcu_filter_pass
* This MPDU passed the normal frame filter programming of rxpcu.
*
* rxpcu_filter_monitor_client
* This MPDU did not pass the regular frame filter and would
* have been dropped, were it not for the frame fitting into the
* 'monitor_client' category.
*
* rxpcu_filter_monitor_other
* This MPDU did not pass the regular frame filter and also did
* not pass the rxpcu_monitor_client filter. It would have been
* dropped accept that it did pass the 'monitor_other' category.
*/
#define RX_DESC_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0)
#define RX_DESC_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2)
enum rx_desc_sw_frame_grp_id {
RX_DESC_SW_FRAME_GRP_ID_NDP_FRAME,
RX_DESC_SW_FRAME_GRP_ID_MCAST_DATA,
RX_DESC_SW_FRAME_GRP_ID_UCAST_DATA,
RX_DESC_SW_FRAME_GRP_ID_NULL_DATA,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0000,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0001,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0010,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0011,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0100,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0101,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0110,
RX_DESC_SW_FRAME_GRP_ID_MGMT_0111,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1000,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1001,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1010,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1011,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1100,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1101,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1110,
RX_DESC_SW_FRAME_GRP_ID_MGMT_1111,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0000,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0001,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0010,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0011,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0100,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0101,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0110,
RX_DESC_SW_FRAME_GRP_ID_CTRL_0111,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1000,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1001,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1010,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1011,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1100,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1101,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1110,
RX_DESC_SW_FRAME_GRP_ID_CTRL_1111,
RX_DESC_SW_FRAME_GRP_ID_UNSUPPORTED,
RX_DESC_SW_FRAME_GRP_ID_PHY_ERR,
};
enum rx_desc_decap_type {
RX_DESC_DECAP_TYPE_RAW,
RX_DESC_DECAP_TYPE_NATIVE_WIFI,
RX_DESC_DECAP_TYPE_ETHERNET2_DIX,
RX_DESC_DECAP_TYPE_8023,
};
enum rx_desc_decrypt_status_code {
RX_DESC_DECRYPT_STATUS_CODE_OK,
RX_DESC_DECRYPT_STATUS_CODE_UNPROTECTED_FRAME,
RX_DESC_DECRYPT_STATUS_CODE_DATA_ERR,
RX_DESC_DECRYPT_STATUS_CODE_KEY_INVALID,
RX_DESC_DECRYPT_STATUS_CODE_PEER_ENTRY_INVALID,
RX_DESC_DECRYPT_STATUS_CODE_OTHER,
};
#define RX_ATTENTION_INFO1_FIRST_MPDU BIT(0)
#define RX_ATTENTION_INFO1_RSVD_1A BIT(1)
#define RX_ATTENTION_INFO1_MCAST_BCAST BIT(2)
#define RX_ATTENTION_INFO1_AST_IDX_NOT_FOUND BIT(3)
#define RX_ATTENTION_INFO1_AST_IDX_TIMEDOUT BIT(4)
#define RX_ATTENTION_INFO1_POWER_MGMT BIT(5)
#define RX_ATTENTION_INFO1_NON_QOS BIT(6)
#define RX_ATTENTION_INFO1_NULL_DATA BIT(7)
#define RX_ATTENTION_INFO1_MGMT_TYPE BIT(8)
#define RX_ATTENTION_INFO1_CTRL_TYPE BIT(9)
#define RX_ATTENTION_INFO1_MORE_DATA BIT(10)
#define RX_ATTENTION_INFO1_EOSP BIT(11)
#define RX_ATTENTION_INFO1_A_MSDU_ERROR BIT(12)
#define RX_ATTENTION_INFO1_FRAGMENT BIT(13)
#define RX_ATTENTION_INFO1_ORDER BIT(14)
#define RX_ATTENTION_INFO1_CCE_MATCH BIT(15)
#define RX_ATTENTION_INFO1_OVERFLOW_ERR BIT(16)
#define RX_ATTENTION_INFO1_MSDU_LEN_ERR BIT(17)
#define RX_ATTENTION_INFO1_TCP_UDP_CKSUM_FAIL BIT(18)
#define RX_ATTENTION_INFO1_IP_CKSUM_FAIL BIT(19)
#define RX_ATTENTION_INFO1_SA_IDX_INVALID BIT(20)
#define RX_ATTENTION_INFO1_DA_IDX_INVALID BIT(21)
#define RX_ATTENTION_INFO1_RSVD_1B BIT(22)
#define RX_ATTENTION_INFO1_RX_IN_TX_DECRYPT_BYP BIT(23)
#define RX_ATTENTION_INFO1_ENCRYPT_REQUIRED BIT(24)
#define RX_ATTENTION_INFO1_DIRECTED BIT(25)
#define RX_ATTENTION_INFO1_BUFFER_FRAGMENT BIT(26)
#define RX_ATTENTION_INFO1_MPDU_LEN_ERR BIT(27)
#define RX_ATTENTION_INFO1_TKIP_MIC_ERR BIT(28)
#define RX_ATTENTION_INFO1_DECRYPT_ERR BIT(29)
#define RX_ATTENTION_INFO1_UNDECRYPT_FRAME_ERR BIT(30)
#define RX_ATTENTION_INFO1_FCS_ERR BIT(31)
#define RX_ATTENTION_INFO2_FLOW_IDX_TIMEOUT BIT(0)
#define RX_ATTENTION_INFO2_FLOW_IDX_INVALID BIT(1)
#define RX_ATTENTION_INFO2_WIFI_PARSER_ERR BIT(2)
#define RX_ATTENTION_INFO2_AMSDU_PARSER_ERR BIT(3)
#define RX_ATTENTION_INFO2_SA_IDX_TIMEOUT BIT(4)
#define RX_ATTENTION_INFO2_DA_IDX_TIMEOUT BIT(5)
#define RX_ATTENTION_INFO2_MSDU_LIMIT_ERR BIT(6)
#define RX_ATTENTION_INFO2_DA_IS_VALID BIT(7)
#define RX_ATTENTION_INFO2_DA_IS_MCBC BIT(8)
#define RX_ATTENTION_INFO2_SA_IS_VALID BIT(9)
#define RX_ATTENTION_INFO2_DCRYPT_STATUS_CODE GENMASK(12, 10)
#define RX_ATTENTION_INFO2_RX_BITMAP_NOT_UPDED BIT(13)
#define RX_ATTENTION_INFO2_MSDU_DONE BIT(31)
struct rx_attention {
__le16 info0;
__le16 phy_ppdu_id;
__le32 info1;
__le32 info2;
} __packed;
/* rx_attention
*
* rxpcu_mpdu_filter_in_category
* Field indicates what the reason was that this mpdu frame
* was allowed to come into the receive path by rxpcu. Values
* are defined in enum %RX_DESC_RXPCU_FILTER_*.
*
* sw_frame_group_id
* SW processes frames based on certain classifications. Values
* are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
*
* phy_ppdu_id
* A ppdu counter value that PHY increments for every PPDU
* received. The counter value wraps around.
*
* first_mpdu
* Indicates the first MSDU of the PPDU. If both first_mpdu
* and last_mpdu are set in the MSDU then this is a not an
* A-MPDU frame but a stand alone MPDU. Interior MPDU in an
* A-MPDU shall have both first_mpdu and last_mpdu bits set to
* 0. The PPDU start status will only be valid when this bit
* is set.
*
* mcast_bcast
* Multicast / broadcast indicator. Only set when the MAC
* address 1 bit 0 is set indicating mcast/bcast and the BSSID
* matches one of the 4 BSSID registers. Only set when
* first_msdu is set.
*
* ast_index_not_found
* Only valid when first_msdu is set. Indicates no AST matching
* entries within the the max search count.
*
* ast_index_timeout
* Only valid when first_msdu is set. Indicates an unsuccessful
* search in the address search table due to timeout.
*
* power_mgmt
* Power management bit set in the 802.11 header. Only set
* when first_msdu is set.
*
* non_qos
* Set if packet is not a non-QoS data frame. Only set when
* first_msdu is set.
*
* null_data
* Set if frame type indicates either null data or QoS null
* data format. Only set when first_msdu is set.
*
* mgmt_type
* Set if packet is a management packet. Only set when
* first_msdu is set.
*
* ctrl_type
* Set if packet is a control packet. Only set when first_msdu
* is set.
*
* more_data
* Set if more bit in frame control is set. Only set when
* first_msdu is set.
*
* eosp
* Set if the EOSP (end of service period) bit in the QoS
* control field is set. Only set when first_msdu is set.
*
* a_msdu_error
* Set if number of MSDUs in A-MSDU is above a threshold or if the
* size of the MSDU is invalid. This receive buffer will contain
* all of the remainder of MSDUs in this MPDU w/o decapsulation.
*
* fragment
* Indicates that this is an 802.11 fragment frame. This is
* set when either the more_frag bit is set in the frame
* control or the fragment number is not zero. Only set when
* first_msdu is set.
*
* order
* Set if the order bit in the frame control is set. Only set
* when first_msdu is set.
*
* cce_match
* Indicates that this status has a corresponding MSDU that
* requires FW processing. The OLE will have classification
* ring mask registers which will indicate the ring(s) for
* packets and descriptors which need FW attention.
*
* overflow_err
* PCU Receive FIFO does not have enough space to store the
* full receive packet. Enough space is reserved in the
* receive FIFO for the status is written. This MPDU remaining
* packets in the PPDU will be filtered and no Ack response
* will be transmitted.
*
* msdu_length_err
* Indicates that the MSDU length from the 802.3 encapsulated
* length field extends beyond the MPDU boundary.
*
* tcp_udp_chksum_fail
* Indicates that the computed checksum (tcp_udp_chksum) did
* not match the checksum in the TCP/UDP header.
*
* ip_chksum_fail
* Indicates that the computed checksum did not match the
* checksum in the IP header.
*
* sa_idx_invalid
* Indicates no matching entry was found in the address search
* table for the source MAC address.
*
* da_idx_invalid
* Indicates no matching entry was found in the address search
* table for the destination MAC address.
*
* rx_in_tx_decrypt_byp
* Indicates that RX packet is not decrypted as Crypto is busy
* with TX packet processing.
*
* encrypt_required
* Indicates that this data type frame is not encrypted even if
* the policy for this MPDU requires encryption as indicated in
* the peer table key type.
*
* directed
* MPDU is a directed packet which means that the RA matched
* our STA addresses. In proxySTA it means that the TA matched
* an entry in our address search table with the corresponding
* 'no_ack' bit is the address search entry cleared.
*
* buffer_fragment
* Indicates that at least one of the rx buffers has been
* fragmented. If set the FW should look at the rx_frag_info
* descriptor described below.
*
* mpdu_length_err
* Indicates that the MPDU was pre-maturely terminated
* resulting in a truncated MPDU. Don't trust the MPDU length
* field.
*
* tkip_mic_err
* Indicates that the MPDU Michael integrity check failed
*
* decrypt_err
* Indicates that the MPDU decrypt integrity check failed
*
* fcs_err
* Indicates that the MPDU FCS check failed
*
* flow_idx_timeout
* Indicates an unsuccessful flow search due to the expiring of
* the search timer.
*
* flow_idx_invalid
* flow id is not valid.
*
* amsdu_parser_error
* A-MSDU could not be properly de-agregated.
*
* sa_idx_timeout
* Indicates an unsuccessful search for the source MAC address
* due to the expiring of the search timer.
*
* da_idx_timeout
* Indicates an unsuccessful search for the destination MAC
* address due to the expiring of the search timer.
*
* msdu_limit_error
* Indicates that the MSDU threshold was exceeded and thus
* all the rest of the MSDUs will not be scattered and will not
* be decasulated but will be DMA'ed in RAW format as a single
* MSDU buffer.
*
* da_is_valid
* Indicates that OLE found a valid DA entry.
*
* da_is_mcbc
* Field Only valid if da_is_valid is set. Indicates the DA address
* was a Multicast or Broadcast address.
*
* sa_is_valid
* Indicates that OLE found a valid SA entry.
*
* decrypt_status_code
* Field provides insight into the decryption performed. Values are
* defined in enum %RX_DESC_DECRYPT_STATUS_CODE*.
*
* rx_bitmap_not_updated
* Frame is received, but RXPCU could not update the receive bitmap
* due to (temporary) fifo constraints.
*
* msdu_done
* If set indicates that the RX packet data, RX header data, RX
* PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU
* start/end descriptors and RX Attention descriptor are all
* valid. This bit must be in the last octet of the
* descriptor.
*/
#define RX_MPDU_START_INFO0_NDP_FRAME BIT(9)
#define RX_MPDU_START_INFO0_PHY_ERR BIT(10)
#define RX_MPDU_START_INFO0_PHY_ERR_MPDU_HDR BIT(11)
#define RX_MPDU_START_INFO0_PROTO_VER_ERR BIT(12)
#define RX_MPDU_START_INFO0_AST_LOOKUP_VALID BIT(13)
#define RX_MPDU_START_INFO1_MPDU_FCTRL_VALID BIT(0)
#define RX_MPDU_START_INFO1_MPDU_DUR_VALID BIT(1)
#define RX_MPDU_START_INFO1_MAC_ADDR1_VALID BIT(2)
#define RX_MPDU_START_INFO1_MAC_ADDR2_VALID BIT(3)
#define RX_MPDU_START_INFO1_MAC_ADDR3_VALID BIT(4)
#define RX_MPDU_START_INFO1_MAC_ADDR4_VALID BIT(5)
#define RX_MPDU_START_INFO1_MPDU_SEQ_CTRL_VALID BIT(6)
#define RX_MPDU_START_INFO1_MPDU_QOS_CTRL_VALID BIT(7)
#define RX_MPDU_START_INFO1_MPDU_HT_CTRL_VALID BIT(8)
#define RX_MPDU_START_INFO1_ENCRYPT_INFO_VALID BIT(9)
#define RX_MPDU_START_INFO1_MPDU_FRAG_NUMBER GENMASK(13, 10)
#define RX_MPDU_START_INFO1_MORE_FRAG_FLAG BIT(14)
#define RX_MPDU_START_INFO1_FROM_DS BIT(16)
#define RX_MPDU_START_INFO1_TO_DS BIT(17)
#define RX_MPDU_START_INFO1_ENCRYPTED BIT(18)
#define RX_MPDU_START_INFO1_MPDU_RETRY BIT(19)
#define RX_MPDU_START_INFO1_MPDU_SEQ_NUM GENMASK(31, 20)
#define RX_MPDU_START_INFO2_EPD_EN BIT(0)
#define RX_MPDU_START_INFO2_ALL_FRAME_ENCPD BIT(1)
#define RX_MPDU_START_INFO2_ENC_TYPE GENMASK(5, 2)
#define RX_MPDU_START_INFO2_VAR_WEP_KEY_WIDTH GENMASK(7, 6)
#define RX_MPDU_START_INFO2_MESH_STA BIT(8)
#define RX_MPDU_START_INFO2_BSSID_HIT BIT(9)
#define RX_MPDU_START_INFO2_BSSID_NUM GENMASK(13, 10)
#define RX_MPDU_START_INFO2_TID GENMASK(17, 14)
#define RX_MPDU_START_INFO3_REO_DEST_IND GENMASK(4, 0)
#define RX_MPDU_START_INFO3_FLOW_ID_TOEPLITZ BIT(7)
#define RX_MPDU_START_INFO3_PKT_SEL_FP_UCAST_DATA BIT(8)
#define RX_MPDU_START_INFO3_PKT_SEL_FP_MCAST_DATA BIT(9)
#define RX_MPDU_START_INFO3_PKT_SEL_FP_CTRL_BAR BIT(10)
#define RX_MPDU_START_INFO3_RXDMA0_SRC_RING_SEL GENMASK(12, 11)
#define RX_MPDU_START_INFO3_RXDMA0_DST_RING_SEL GENMASK(14, 13)
#define RX_MPDU_START_INFO4_REO_QUEUE_DESC_HI GENMASK(7, 0)
#define RX_MPDU_START_INFO4_RECV_QUEUE_NUM GENMASK(23, 8)
#define RX_MPDU_START_INFO4_PRE_DELIM_ERR_WARN BIT(24)
#define RX_MPDU_START_INFO4_FIRST_DELIM_ERR BIT(25)
#define RX_MPDU_START_INFO5_KEY_ID GENMASK(7, 0)
#define RX_MPDU_START_INFO5_NEW_PEER_ENTRY BIT(8)
#define RX_MPDU_START_INFO5_DECRYPT_NEEDED BIT(9)
#define RX_MPDU_START_INFO5_DECAP_TYPE GENMASK(11, 10)
#define RX_MPDU_START_INFO5_VLAN_TAG_C_PADDING BIT(12)
#define RX_MPDU_START_INFO5_VLAN_TAG_S_PADDING BIT(13)
#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_C BIT(14)
#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_S BIT(15)
#define RX_MPDU_START_INFO5_PRE_DELIM_COUNT GENMASK(27, 16)
#define RX_MPDU_START_INFO5_AMPDU_FLAG BIT(28)
#define RX_MPDU_START_INFO5_BAR_FRAME BIT(29)
#define RX_MPDU_START_INFO6_MPDU_LEN GENMASK(13, 0)
#define RX_MPDU_START_INFO6_FIRST_MPDU BIT(14)
#define RX_MPDU_START_INFO6_MCAST_BCAST BIT(15)
#define RX_MPDU_START_INFO6_AST_IDX_NOT_FOUND BIT(16)
#define RX_MPDU_START_INFO6_AST_IDX_TIMEOUT BIT(17)
#define RX_MPDU_START_INFO6_POWER_MGMT BIT(18)
#define RX_MPDU_START_INFO6_NON_QOS BIT(19)
#define RX_MPDU_START_INFO6_NULL_DATA BIT(20)
#define RX_MPDU_START_INFO6_MGMT_TYPE BIT(21)
#define RX_MPDU_START_INFO6_CTRL_TYPE BIT(22)
#define RX_MPDU_START_INFO6_MORE_DATA BIT(23)
#define RX_MPDU_START_INFO6_EOSP BIT(24)
#define RX_MPDU_START_INFO6_FRAGMENT BIT(25)
#define RX_MPDU_START_INFO6_ORDER BIT(26)
#define RX_MPDU_START_INFO6_UAPSD_TRIGGER BIT(27)
#define RX_MPDU_START_INFO6_ENCRYPT_REQUIRED BIT(28)
#define RX_MPDU_START_INFO6_DIRECTED BIT(29)
#define RX_MPDU_START_RAW_MPDU BIT(0)
struct rx_mpdu_start {
__le16 info0;
__le16 phy_ppdu_id;
__le16 ast_index;
__le16 sw_peer_id;
__le32 info1;
__le32 info2;
__le32 pn[4];
__le32 peer_meta_data;
__le32 info3;
__le32 reo_queue_desc_lo;
__le32 info4;
__le32 info5;
__le32 info6;
__le16 frame_ctrl;
__le16 duration;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
u8 addr4[ETH_ALEN];
__le16 qos_ctrl;
__le32 ht_ctrl;
__le32 raw;
} __packed;
/* rx_mpdu_start
*
* rxpcu_mpdu_filter_in_category
* Field indicates what the reason was that this mpdu frame
* was allowed to come into the receive path by rxpcu. Values
* are defined in enum %RX_DESC_RXPCU_FILTER_*.
* Note: for ndp frame, if it was expected because the preceding
* NDPA was filter_pass, the setting rxpcu_filter_pass will be
* used. This setting will also be used for every ndp frame in
* case Promiscuous mode is enabled.
*
* sw_frame_group_id
* SW processes frames based on certain classifications. Values
* are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
*
* ndp_frame
* Indicates that the received frame was an NDP frame.
*
* phy_err
* Indicates that PHY error was received before MAC received data.
*
* phy_err_during_mpdu_header
* PHY error was received before MAC received the complete MPDU
* header which was needed for proper decoding.
*
* protocol_version_err
* RXPCU detected a version error in the frame control field.
*
* ast_based_lookup_valid
* AST based lookup for this frame has found a valid result.
*
* phy_ppdu_id
* A ppdu counter value that PHY increments for every PPDU
* received. The counter value wraps around.
*
* ast_index
* This field indicates the index of the AST entry corresponding
* to this MPDU. It is provided by the GSE module instantiated in
* RXPCU. A value of 0xFFFF indicates an invalid AST index.
*
* sw_peer_id
* This field indicates a unique peer identifier. It is set equal
* to field 'sw_peer_id' from the AST entry.
*
* mpdu_frame_control_valid, mpdu_duration_valid, mpdu_qos_control_valid,
* mpdu_ht_control_valid, frame_encryption_info_valid
* Indicates that each fields have valid entries.
*
* mac_addr_adx_valid
* Corresponding mac_addr_adx_{lo/hi} has valid entries.
*
* from_ds, to_ds
* Valid only when mpdu_frame_control_valid is set. Indicates that
* frame is received from DS and sent to DS.
*
* encrypted
* Protected bit from the frame control.
*
* mpdu_retry
* Retry bit from frame control. Only valid when first_msdu is set.
*
* mpdu_sequence_number
* The sequence number from the 802.11 header.
*
* epd_en
* If set, use EPD instead of LPD.
*
* all_frames_shall_be_encrypted
* If set, all frames (data only?) shall be encrypted. If not,
* RX CRYPTO shall set an error flag.
*
* encrypt_type
* Values are defined in enum %HAL_ENCRYPT_TYPE_.
*
* mesh_sta
* Indicates a Mesh (11s) STA.
*
* bssid_hit
* BSSID of the incoming frame matched one of the 8 BSSID
* register values.
*
* bssid_number
* This number indicates which one out of the 8 BSSID register
* values matched the incoming frame.
*
* tid
* TID field in the QoS control field
*
* pn
* The PN number.
*
* peer_meta_data
* Meta data that SW has programmed in the Peer table entry
* of the transmitting STA.
*
* rx_reo_queue_desc_addr_lo
* Address (lower 32 bits) of the REO queue descriptor.
*
* rx_reo_queue_desc_addr_hi
* Address (upper 8 bits) of the REO queue descriptor.
*
* receive_queue_number
* Indicates the MPDU queue ID to which this MPDU link
* descriptor belongs.
*
* pre_delim_err_warning
* Indicates that a delimiter FCS error was found in between the
* previous MPDU and this MPDU. Note that this is just a warning,
* and does not mean that this MPDU is corrupted in any way. If
* it is, there will be other errors indicated such as FCS or
* decrypt errors.
*
* first_delim_err
* Indicates that the first delimiter had a FCS failure.
*
* key_id
* The key ID octet from the IV.
*
* new_peer_entry
* Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY
* doesn't follow so RX DECRYPTION module either uses old peer
* entry or not decrypt.
*
* decrypt_needed
* When RXPCU sets bit 'ast_index_not_found or ast_index_timeout',
* RXPCU will also ensure that this bit is NOT set. CRYPTO for that
* reason only needs to evaluate this bit and non of the other ones
*
* decap_type
* Used by the OLE during decapsulation. Values are defined in
* enum %MPDU_START_DECAP_TYPE_*.
*
* rx_insert_vlan_c_tag_padding
* rx_insert_vlan_s_tag_padding
* Insert 4 byte of all zeros as VLAN tag or double VLAN tag if
* the rx payload does not have VLAN.
*
* strip_vlan_c_tag_decap
* strip_vlan_s_tag_decap
* Strip VLAN or double VLAN during decapsulation.
*
* pre_delim_count
* The number of delimiters before this MPDU. Note that this
* number is cleared at PPDU start. If this MPDU is the first
* received MPDU in the PPDU and this MPDU gets filtered-in,
* this field will indicate the number of delimiters located
* after the last MPDU in the previous PPDU.
*
* If this MPDU is located after the first received MPDU in
* an PPDU, this field will indicate the number of delimiters
* located between the previous MPDU and this MPDU.
*
* ampdu_flag
* Received frame was part of an A-MPDU.
*
* bar_frame
* Received frame is a BAR frame
*
* mpdu_length
* MPDU length before decapsulation.
*
* first_mpdu..directed
* See definition in RX attention descriptor
*
*/
enum rx_msdu_start_pkt_type {
RX_MSDU_START_PKT_TYPE_11A,
RX_MSDU_START_PKT_TYPE_11B,
RX_MSDU_START_PKT_TYPE_11N,
RX_MSDU_START_PKT_TYPE_11AC,
RX_MSDU_START_PKT_TYPE_11AX,
};
enum rx_msdu_start_sgi {
RX_MSDU_START_SGI_0_8_US,
RX_MSDU_START_SGI_0_4_US,
RX_MSDU_START_SGI_1_6_US,
RX_MSDU_START_SGI_3_2_US,
};
enum rx_msdu_start_recv_bw {
RX_MSDU_START_RECV_BW_20MHZ,
RX_MSDU_START_RECV_BW_40MHZ,
RX_MSDU_START_RECV_BW_80MHZ,
RX_MSDU_START_RECV_BW_160MHZ,
};
enum rx_msdu_start_reception_type {
RX_MSDU_START_RECEPTION_TYPE_SU,
RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO,
RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA,
RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO,
RX_MSDU_START_RECEPTION_TYPE_UL_MU_MIMO,
RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA,
RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA_MIMO,
};
#define RX_MSDU_START_INFO1_MSDU_LENGTH GENMASK(13, 0)
#define RX_MSDU_START_INFO1_RSVD_1A BIT(14)
#define RX_MSDU_START_INFO1_IPSEC_ESP BIT(15)
#define RX_MSDU_START_INFO1_L3_OFFSET GENMASK(22, 16)
#define RX_MSDU_START_INFO1_IPSEC_AH BIT(23)
#define RX_MSDU_START_INFO1_L4_OFFSET GENMASK(31, 24)
#define RX_MSDU_START_INFO2_MSDU_NUMBER GENMASK(7, 0)
#define RX_MSDU_START_INFO2_DECAP_TYPE GENMASK(9, 8)
#define RX_MSDU_START_INFO2_IPV4 BIT(10)
#define RX_MSDU_START_INFO2_IPV6 BIT(11)
#define RX_MSDU_START_INFO2_TCP BIT(12)
#define RX_MSDU_START_INFO2_UDP BIT(13)
#define RX_MSDU_START_INFO2_IP_FRAG BIT(14)
#define RX_MSDU_START_INFO2_TCP_ONLY_ACK BIT(15)
#define RX_MSDU_START_INFO2_DA_IS_BCAST_MCAST BIT(16)
#define RX_MSDU_START_INFO2_SELECTED_TOEPLITZ_HASH GENMASK(18, 17)
#define RX_MSDU_START_INFO2_IP_FIXED_HDR_VALID BIT(19)
#define RX_MSDU_START_INFO2_IP_EXTN_HDR_VALID BIT(20)
#define RX_MSDU_START_INFO2_IP_TCP_UDP_HDR_VALID BIT(21)
#define RX_MSDU_START_INFO2_MESH_CTRL_PRESENT BIT(22)
#define RX_MSDU_START_INFO2_LDPC BIT(23)
#define RX_MSDU_START_INFO2_IP4_IP6_NXT_HDR GENMASK(31, 24)
#define RX_MSDU_START_INFO2_DECAP_FORMAT GENMASK(9, 8)
#define RX_MSDU_START_INFO3_USER_RSSI GENMASK(7, 0)
#define RX_MSDU_START_INFO3_PKT_TYPE GENMASK(11, 8)
#define RX_MSDU_START_INFO3_STBC BIT(12)
#define RX_MSDU_START_INFO3_SGI GENMASK(14, 13)
#define RX_MSDU_START_INFO3_RATE_MCS GENMASK(18, 15)
#define RX_MSDU_START_INFO3_RECV_BW GENMASK(20, 19)
#define RX_MSDU_START_INFO3_RECEPTION_TYPE GENMASK(23, 21)
#define RX_MSDU_START_INFO3_MIMO_SS_BITMAP GENMASK(31, 24)
struct rx_msdu_start {
__le16 info0;
__le16 phy_ppdu_id;
__le32 info1;
__le32 info2;
__le32 toeplitz_hash;
__le32 flow_id_toeplitz;
__le32 info3;
__le32 ppdu_start_timestamp;
__le32 phy_meta_data;
} __packed;
/* rx_msdu_start
*
* rxpcu_mpdu_filter_in_category
* Field indicates what the reason was that this mpdu frame
* was allowed to come into the receive path by rxpcu. Values
* are defined in enum %RX_DESC_RXPCU_FILTER_*.
*
* sw_frame_group_id
* SW processes frames based on certain classifications. Values
* are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
*
* phy_ppdu_id
* A ppdu counter value that PHY increments for every PPDU
* received. The counter value wraps around.
*
* msdu_length
* MSDU length in bytes after decapsulation.
*
* ipsec_esp
* Set if IPv4/v6 packet is using IPsec ESP.
*
* l3_offset
* Depending upon mode bit, this field either indicates the
* L3 offset in bytes from the start of the RX_HEADER or the IP
* offset in bytes from the start of the packet after
* decapsulation. The latter is only valid if ipv4_proto or
* ipv6_proto is set.
*
* ipsec_ah
* Set if IPv4/v6 packet is using IPsec AH
*
* l4_offset
* Depending upon mode bit, this field either indicates the
* L4 offset nin bytes from the start of RX_HEADER (only valid
* if either ipv4_proto or ipv6_proto is set to 1) or indicates
* the offset in bytes to the start of TCP or UDP header from
* the start of the IP header after decapsulation (Only valid if
* tcp_proto or udp_proto is set). The value 0 indicates that
* the offset is longer than 127 bytes.
*
* msdu_number
* Indicates the MSDU number within a MPDU. This value is
* reset to zero at the start of each MPDU. If the number of
* MSDU exceeds 255 this number will wrap using modulo 256.
*
* decap_type
* Indicates the format after decapsulation. Values are defined in
* enum %MPDU_START_DECAP_TYPE_*.
*
* ipv4_proto
* Set if L2 layer indicates IPv4 protocol.
*
* ipv6_proto
* Set if L2 layer indicates IPv6 protocol.
*
* tcp_proto
* Set if the ipv4_proto or ipv6_proto are set and the IP protocol
* indicates TCP.
*
* udp_proto
* Set if the ipv4_proto or ipv6_proto are set and the IP protocol
* indicates UDP.
*
* ip_frag
* Indicates that either the IP More frag bit is set or IP frag
* number is non-zero. If set indicates that this is a fragmented
* IP packet.
*
* tcp_only_ack
* Set if only the TCP Ack bit is set in the TCP flags and if
* the TCP payload is 0.
*
* da_is_bcast_mcast
* The destination address is broadcast or multicast.
*
* toeplitz_hash
* Actual chosen Hash.
* 0 - Toeplitz hash of 2-tuple (IP source address, IP
* destination address)
* 1 - Toeplitz hash of 4-tuple (IP source address,
* IP destination address, L4 (TCP/UDP) source port,
* L4 (TCP/UDP) destination port)
* 2 - Toeplitz of flow_id
* 3 - Zero is used
*
* ip_fixed_header_valid
* Fixed 20-byte IPv4 header or 40-byte IPv6 header parsed
* fully within first 256 bytes of the packet
*
* ip_extn_header_valid
* IPv6/IPv6 header, including IPv4 options and
* recognizable extension headers parsed fully within first 256
* bytes of the packet
*
* tcp_udp_header_valid
* Fixed 20-byte TCP (excluding TCP options) or 8-byte UDP
* header parsed fully within first 256 bytes of the packet
*
* mesh_control_present
* When set, this MSDU includes the 'Mesh Control' field
*
* ldpc
*
* ip4_protocol_ip6_next_header
* For IPv4, this is the 8 bit protocol field set). For IPv6 this
* is the 8 bit next_header field.
*
* toeplitz_hash_2_or_4
* Controlled by RxOLE register - If register bit set to 0,
* Toeplitz hash is computed over 2-tuple IPv4 or IPv6 src/dest
* addresses; otherwise, toeplitz hash is computed over 4-tuple
* IPv4 or IPv6 src/dest addresses and src/dest ports.
*
* flow_id_toeplitz
* Toeplitz hash of 5-tuple
* {IP source address, IP destination address, IP source port, IP
* destination port, L4 protocol} in case of non-IPSec.
*
* In case of IPSec - Toeplitz hash of 4-tuple
* {IP source address, IP destination address, SPI, L4 protocol}
*
* The relevant Toeplitz key registers are provided in RxOLE's
* instance of common parser module. These registers are separate
* from the Toeplitz keys used by ASE/FSE modules inside RxOLE.
* The actual value will be passed on from common parser module
* to RxOLE in one of the WHO_* TLVs.
*
* user_rssi
* RSSI for this user
*
* pkt_type
* Values are defined in enum %RX_MSDU_START_PKT_TYPE_*.
*
* stbc
* When set, use STBC transmission rates.
*
* sgi
* Field only valid when pkt type is HT, VHT or HE. Values are
* defined in enum %RX_MSDU_START_SGI_*.
*
* rate_mcs
* MCS Rate used.
*
* receive_bandwidth
* Full receive Bandwidth. Values are defined in enum
* %RX_MSDU_START_RECV_*.
*
* reception_type
* Indicates what type of reception this is and defined in enum
* %RX_MSDU_START_RECEPTION_TYPE_*.
*
* mimo_ss_bitmap
* Field only valid when
* Reception_type is RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO or
* RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO.
*
* Bitmap, with each bit indicating if the related spatial
* stream is used for this STA
*
* LSB related to SS 0
*
* 0 - spatial stream not used for this reception
* 1 - spatial stream used for this reception
*
* ppdu_start_timestamp
* Timestamp that indicates when the PPDU that contained this MPDU
* started on the medium.
*
* phy_meta_data
* SW programmed Meta data provided by the PHY. Can be used for SW
* to indicate the channel the device is on.
*/
#define RX_MSDU_END_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0)
#define RX_MSDU_END_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2)
#define RX_MSDU_END_INFO1_KEY_ID GENMASK(7, 0)
#define RX_MSDU_END_INFO1_CCE_SUPER_RULE GENMASK(13, 8)
#define RX_MSDU_END_INFO1_CCND_TRUNCATE BIT(14)
#define RX_MSDU_END_INFO1_CCND_CCE_DIS BIT(15)
#define RX_MSDU_END_INFO1_EXT_WAPI_PN GENMASK(31, 16)
#define RX_MSDU_END_INFO2_REPORTED_MPDU_LEN GENMASK(13, 0)
#define RX_MSDU_END_INFO2_FIRST_MSDU BIT(14)
#define RX_MSDU_END_INFO2_LAST_MSDU BIT(15)
#define RX_MSDU_END_INFO2_SA_IDX_TIMEOUT BIT(16)
#define RX_MSDU_END_INFO2_DA_IDX_TIMEOUT BIT(17)
#define RX_MSDU_END_INFO2_MSDU_LIMIT_ERR BIT(18)
#define RX_MSDU_END_INFO2_FLOW_IDX_TIMEOUT BIT(19)
#define RX_MSDU_END_INFO2_FLOW_IDX_INVALID BIT(20)
#define RX_MSDU_END_INFO2_WIFI_PARSER_ERR BIT(21)
#define RX_MSDU_END_INFO2_AMSDU_PARSET_ERR BIT(22)
#define RX_MSDU_END_INFO2_SA_IS_VALID BIT(23)
#define RX_MSDU_END_INFO2_DA_IS_VALID BIT(24)
#define RX_MSDU_END_INFO2_DA_IS_MCBC BIT(25)
#define RX_MSDU_END_INFO2_L3_HDR_PADDING GENMASK(27, 26)
#define RX_MSDU_END_INFO3_TCP_FLAG GENMASK(8, 0)
#define RX_MSDU_END_INFO3_LRO_ELIGIBLE BIT(9)
#define RX_MSDU_END_INFO4_DA_OFFSET GENMASK(5, 0)
#define RX_MSDU_END_INFO4_SA_OFFSET GENMASK(11, 6)
#define RX_MSDU_END_INFO4_DA_OFFSET_VALID BIT(12)
#define RX_MSDU_END_INFO4_SA_OFFSET_VALID BIT(13)
#define RX_MSDU_END_INFO4_L3_TYPE GENMASK(31, 16)
#define RX_MSDU_END_INFO5_MSDU_DROP BIT(0)
#define RX_MSDU_END_INFO5_REO_DEST_IND GENMASK(5, 1)
#define RX_MSDU_END_INFO5_FLOW_IDX GENMASK(25, 6)
struct rx_msdu_end {
__le16 info0;
__le16 phy_ppdu_id;
__le16 ip_hdr_cksum;
__le16 tcp_udp_cksum;
__le32 info1;
__le32 ext_wapi_pn[2];
__le32 info2;
__le32 ipv6_options_crc;
__le32 tcp_seq_num;
__le32 tcp_ack_num;
__le16 info3;
__le16 window_size;
__le32 info4;
__le32 rule_indication[2];
__le16 sa_idx;
__le16 da_idx;
__le32 info5;
__le32 fse_metadata;
__le16 cce_metadata;
__le16 sa_sw_peer_id;
} __packed;
/* rx_msdu_end
*
* rxpcu_mpdu_filter_in_category
* Field indicates what the reason was that this mpdu frame
* was allowed to come into the receive path by rxpcu. Values
* are defined in enum %RX_DESC_RXPCU_FILTER_*.
*
* sw_frame_group_id
* SW processes frames based on certain classifications. Values
* are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
*
* phy_ppdu_id
* A ppdu counter value that PHY increments for every PPDU
* received. The counter value wraps around.
*
* ip_hdr_cksum
* This can include the IP header checksum or the pseudo
* header checksum used by TCP/UDP checksum.
*
* tcp_udp_chksum
* The value of the computed TCP/UDP checksum. A mode bit
* selects whether this checksum is the full checksum or the
* partial checksum which does not include the pseudo header.
*
* key_id
* The key ID octet from the IV. Only valid when first_msdu is set.
*
* cce_super_rule
* Indicates the super filter rule.
*
* cce_classify_not_done_truncate
* Classification failed due to truncated frame.
*
* cce_classify_not_done_cce_dis
* Classification failed due to CCE global disable
*
* ext_wapi_pn*
* Extension PN (packet number) which is only used by WAPI.
*
* reported_mpdu_length
* MPDU length before decapsulation. Only valid when first_msdu is
* set. This field is taken directly from the length field of the
* A-MPDU delimiter or the preamble length field for non-A-MPDU
* frames.
*
* first_msdu
* Indicates the first MSDU of A-MSDU. If both first_msdu and
* last_msdu are set in the MSDU then this is a non-aggregated MSDU
* frame: normal MPDU. Interior MSDU in an A-MSDU shall have both
* first_mpdu and last_mpdu bits set to 0.
*
* last_msdu
* Indicates the last MSDU of the A-MSDU. MPDU end status is only
* valid when last_msdu is set.
*
* sa_idx_timeout
* Indicates an unsuccessful MAC source address search due to the
* expiring of the search timer.
*
* da_idx_timeout
* Indicates an unsuccessful MAC destination address search due to
* the expiring of the search timer.
*
* msdu_limit_error
* Indicates that the MSDU threshold was exceeded and thus all the
* rest of the MSDUs will not be scattered and will not be
* decapsulated but will be DMA'ed in RAW format as a single MSDU.
*
* flow_idx_timeout
* Indicates an unsuccessful flow search due to the expiring of
* the search timer.
*
* flow_idx_invalid
* flow id is not valid.
*
* amsdu_parser_error
* A-MSDU could not be properly de-agregated.
*
* sa_is_valid
* Indicates that OLE found a valid SA entry.
*
* da_is_valid
* Indicates that OLE found a valid DA entry.
*
* da_is_mcbc
* Field Only valid if da_is_valid is set. Indicates the DA address
* was a Multicast of Broadcast address.
*
* l3_header_padding
* Number of bytes padded to make sure that the L3 header will
* always start of a Dword boundary.
*
* ipv6_options_crc
* 32 bit CRC computed out of IP v6 extension headers.
*
* tcp_seq_number
* TCP sequence number.
*
* tcp_ack_number
* TCP acknowledge number.
*
* tcp_flag
* TCP flags {NS, CWR, ECE, URG, ACK, PSH, RST, SYN, FIN}.
*
* lro_eligible
* Computed out of TCP and IP fields to indicate that this
* MSDU is eligible for LRO.
*
* window_size
* TCP receive window size.
*
* da_offset
* Offset into MSDU buffer for DA.
*
* sa_offset
* Offset into MSDU buffer for SA.
*
* da_offset_valid
* da_offset field is valid. This will be set to 0 in case
* of a dynamic A-MSDU when DA is compressed.
*
* sa_offset_valid
* sa_offset field is valid. This will be set to 0 in case
* of a dynamic A-MSDU when SA is compressed.
*
* l3_type
* The 16-bit type value indicating the type of L3 later
* extracted from LLC/SNAP, set to zero if SNAP is not
* available.
*
* rule_indication
* Bitmap indicating which of rules have matched.
*
* sa_idx
* The offset in the address table which matches MAC source address
*
* da_idx
* The offset in the address table which matches MAC destination
* address.
*
* msdu_drop
* REO shall drop this MSDU and not forward it to any other ring.
*
* reo_destination_indication
* The id of the reo exit ring where the msdu frame shall push
* after (MPDU level) reordering has finished. Values are defined
* in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
*
* flow_idx
* Flow table index.
*
* fse_metadata
* FSE related meta data.
*
* cce_metadata
* CCE related meta data.
*
* sa_sw_peer_id
* sw_peer_id from the address search entry corresponding to the
* source address of the MSDU.
*/
enum rx_mpdu_end_rxdma_dest_ring {
RX_MPDU_END_RXDMA_DEST_RING_RELEASE,
RX_MPDU_END_RXDMA_DEST_RING_FW,
RX_MPDU_END_RXDMA_DEST_RING_SW,
RX_MPDU_END_RXDMA_DEST_RING_REO,
};
#define RX_MPDU_END_INFO1_UNSUP_KTYPE_SHORT_FRAME BIT(11)
#define RX_MPDU_END_INFO1_RX_IN_TX_DECRYPT_BYT BIT(12)
#define RX_MPDU_END_INFO1_OVERFLOW_ERR BIT(13)
#define RX_MPDU_END_INFO1_MPDU_LEN_ERR BIT(14)
#define RX_MPDU_END_INFO1_TKIP_MIC_ERR BIT(15)
#define RX_MPDU_END_INFO1_DECRYPT_ERR BIT(16)
#define RX_MPDU_END_INFO1_UNENCRYPTED_FRAME_ERR BIT(17)
#define RX_MPDU_END_INFO1_PN_FIELDS_VALID BIT(18)
#define RX_MPDU_END_INFO1_FCS_ERR BIT(19)
#define RX_MPDU_END_INFO1_MSDU_LEN_ERR BIT(20)
#define RX_MPDU_END_INFO1_RXDMA0_DEST_RING GENMASK(22, 21)
#define RX_MPDU_END_INFO1_RXDMA1_DEST_RING GENMASK(24, 23)
#define RX_MPDU_END_INFO1_DECRYPT_STATUS_CODE GENMASK(27, 25)
#define RX_MPDU_END_INFO1_RX_BITMAP_NOT_UPD BIT(28)
struct rx_mpdu_end {
__le16 info0;
__le16 phy_ppdu_id;
__le32 info1;
} __packed;
/* rx_mpdu_end
*
* rxpcu_mpdu_filter_in_category
* Field indicates what the reason was that this mpdu frame
* was allowed to come into the receive path by rxpcu. Values
* are defined in enum %RX_DESC_RXPCU_FILTER_*.
*
* sw_frame_group_id
* SW processes frames based on certain classifications. Values
* are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
*
* phy_ppdu_id
* A ppdu counter value that PHY increments for every PPDU
* received. The counter value wraps around.
*
* unsup_ktype_short_frame
* This bit will be '1' when WEP or TKIP or WAPI key type is
* received for 11ah short frame. Crypto will bypass the received
* packet without decryption to RxOLE after setting this bit.
*
* rx_in_tx_decrypt_byp
* Indicates that RX packet is not decrypted as Crypto is
* busy with TX packet processing.
*
* overflow_err
* RXPCU Receive FIFO ran out of space to receive the full MPDU.
* Therefore this MPDU is terminated early and is thus corrupted.
*
* This MPDU will not be ACKed.
*
* RXPCU might still be able to correctly receive the following
* MPDUs in the PPDU if enough fifo space became available in time.
*
* mpdu_length_err
* Set by RXPCU if the expected MPDU length does not correspond
* with the actually received number of bytes in the MPDU.
*
* tkip_mic_err
* Set by Rx crypto when crypto detected a TKIP MIC error for
* this MPDU.
*
* decrypt_err
* Set by RX CRYPTO when CRYPTO detected a decrypt error for this
* MPDU or CRYPTO received an encrypted frame, but did not get a
* valid corresponding key id in the peer entry.
*
* unencrypted_frame_err
* Set by RX CRYPTO when CRYPTO detected an unencrypted frame while
* in the peer entry field 'All_frames_shall_be_encrypted' is set.
*
* pn_fields_contain_valid_info
* Set by RX CRYPTO to indicate that there is a valid PN field
* present in this MPDU.
*
* fcs_err
* Set by RXPCU when there is an FCS error detected for this MPDU.
*
* msdu_length_err
* Set by RXOLE when there is an msdu length error detected
* in at least 1 of the MSDUs embedded within the MPDU.
*
* rxdma0_destination_ring
* rxdma1_destination_ring
* The ring to which RXDMA0/1 shall push the frame, assuming
* no MPDU level errors are detected. In case of MPDU level
* errors, RXDMA0/1 might change the RXDMA0/1 destination. Values
* are defined in %enum RX_MPDU_END_RXDMA_DEST_RING_*.
*
* decrypt_status_code
* Field provides insight into the decryption performed. Values
* are defined in enum %RX_DESC_DECRYPT_STATUS_CODE_*.
*
* rx_bitmap_not_updated
* Frame is received, but RXPCU could not update the receive bitmap
* due to (temporary) fifo constraints.
*/
/* Padding bytes to avoid TLV's spanning across 128 byte boundary */
#define HAL_RX_DESC_PADDING0_BYTES 4
#define HAL_RX_DESC_PADDING1_BYTES 16
#define HAL_RX_DESC_HDR_STATUS_LEN 120
struct hal_rx_desc {
__le32 msdu_end_tag;
struct rx_msdu_end msdu_end;
__le32 rx_attn_tag;
struct rx_attention attention;
__le32 msdu_start_tag;
struct rx_msdu_start msdu_start;
u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES];
__le32 mpdu_start_tag;
struct rx_mpdu_start mpdu_start;
__le32 mpdu_end_tag;
struct rx_mpdu_end mpdu_end;
u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES];
__le32 hdr_status_tag;
__le32 phy_ppdu_id;
u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN];
u8 msdu_payload[0];
} __packed;
#define HAL_RX_RU_ALLOC_TYPE_MAX 6
#define RU_26 1
#define RU_52 2
#define RU_106 4
#define RU_242 9
#define RU_484 18
#define RU_996 37
#endif /* ATH11K_RX_DESC_H */