blob: d5bc5d70256399723f29065b0ab09cdb20a32a9b [file] [log] [blame] [edit]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm/mm/proc-sa110.S
*
* Copyright (C) 1997-2002 Russell King
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* MMU functions for SA110
*
* These are the low level assembler for performing cache and TLB
* functions on the StrongARM-110.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <mach/hardware.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
/*
* the cache line size of the I and D cache
*/
#define DCACHELINESIZE 32
.text
/*
* cpu_sa110_proc_init()
*/
ENTRY(cpu_sa110_proc_init)
mov r0, #0
mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
ret lr
/*
* cpu_sa110_proc_fin()
*/
ENTRY(cpu_sa110_proc_fin)
mov r0, #0
mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
/*
* cpu_sa110_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*/
.align 5
.pushsection .idmap.text, "ax"
ENTRY(cpu_sa110_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
ENDPROC(cpu_sa110_reset)
.popsection
/*
* cpu_sa110_do_idle(type)
*
* Cause the processor to idle
*
* type: call type:
* 0 = slow idle
* 1 = fast idle
* 2 = switch to slow processor clock
* 3 = switch to fast processor clock
*/
.align 5
ENTRY(cpu_sa110_do_idle)
mcr p15, 0, ip, c15, c2, 2 @ disable clock switching
ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc
ldr r1, [r1, #0] @ force switch to MCLK
mov r0, r0 @ safety
mov r0, r0 @ safety
mov r0, r0 @ safety
mcr p15, 0, r0, c15, c8, 2 @ Wait for interrupt, cache aligned
mov r0, r0 @ safety
mov r0, r0 @ safety
mov r0, r0 @ safety
mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
ret lr
/* ================================= CACHE ================================ */
/*
* cpu_sa110_dcache_clean_area(addr,sz)
*
* Clean the specified entry of any caches such that the MMU
* translation fetches will obtain correct data.
*
* addr: cache-unaligned virtual address
*/
.align 5
ENTRY(cpu_sa110_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #DCACHELINESIZE
subs r1, r1, #DCACHELINESIZE
bhi 1b
ret lr
/* =============================== PageTable ============================== */
/*
* cpu_sa110_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.align 5
ENTRY(cpu_sa110_switch_mm)
#ifdef CONFIG_MMU
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ldr pc, [sp], #4
#else
ret lr
#endif
/*
* cpu_sa110_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
ENTRY(cpu_sa110_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext wc_disable=0
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
.type __sa110_setup, #function
__sa110_setup:
mov r10, #0
mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
#endif
adr r5, sa110_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
bic r0, r0, r5
orr r0, r0, r6
ret lr
.size __sa110_setup, . - __sa110_setup
/*
* R
* .RVI ZFRS BLDP WCAM
* ..01 0001 ..11 1101
*
*/
.type sa110_crval, #object
sa110_crval:
crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions sa110, dabort=v4_early_abort, pabort=legacy_pabort
.section ".rodata"
string cpu_arch_name, "armv4"
string cpu_elf_name, "v4"
string cpu_sa110_name, "StrongARM-110"
.align
.section ".proc.info.init", #alloc
.type __sa110_proc_info,#object
__sa110_proc_info:
.long 0x4401a100
.long 0xfffffff0
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
initfn __sa110_setup, __sa110_proc_info
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
.long cpu_sa110_name
.long sa110_processor_functions
.long v4wb_tlb_fns
.long v4wb_user_fns
.long v4wb_cache_fns
.size __sa110_proc_info, . - __sa110_proc_info