| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Released under the GPLv2 only. | 
 |  */ | 
 |  | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/ch9.h> | 
 | #include <linux/usb/hcd.h> | 
 | #include <linux/usb/quirks.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/device.h> | 
 | #include <asm/byteorder.h> | 
 | #include "usb.h" | 
 |  | 
 |  | 
 | #define USB_MAXALTSETTING		128	/* Hard limit */ | 
 |  | 
 | #define USB_MAXCONFIG			8	/* Arbitrary limit */ | 
 |  | 
 |  | 
 | static inline const char *plural(int n) | 
 | { | 
 | 	return (n == 1 ? "" : "s"); | 
 | } | 
 |  | 
 | static int find_next_descriptor(unsigned char *buffer, int size, | 
 |     int dt1, int dt2, int *num_skipped) | 
 | { | 
 | 	struct usb_descriptor_header *h; | 
 | 	int n = 0; | 
 | 	unsigned char *buffer0 = buffer; | 
 |  | 
 | 	/* Find the next descriptor of type dt1 or dt2 */ | 
 | 	while (size > 0) { | 
 | 		h = (struct usb_descriptor_header *) buffer; | 
 | 		if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2) | 
 | 			break; | 
 | 		buffer += h->bLength; | 
 | 		size -= h->bLength; | 
 | 		++n; | 
 | 	} | 
 |  | 
 | 	/* Store the number of descriptors skipped and return the | 
 | 	 * number of bytes skipped */ | 
 | 	if (num_skipped) | 
 | 		*num_skipped = n; | 
 | 	return buffer - buffer0; | 
 | } | 
 |  | 
 | static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev, | 
 | 		int cfgno, int inum, int asnum, struct usb_host_endpoint *ep, | 
 | 		unsigned char *buffer, int size) | 
 | { | 
 | 	struct usb_ssp_isoc_ep_comp_descriptor *desc; | 
 |  | 
 | 	/* | 
 | 	 * The SuperSpeedPlus Isoc endpoint companion descriptor immediately | 
 | 	 * follows the SuperSpeed Endpoint Companion descriptor | 
 | 	 */ | 
 | 	desc = (struct usb_ssp_isoc_ep_comp_descriptor *) buffer; | 
 | 	if (desc->bDescriptorType != USB_DT_SSP_ISOC_ENDPOINT_COMP || | 
 | 	    size < USB_DT_SSP_ISOC_EP_COMP_SIZE) { | 
 | 		dev_notice(ddev, "Invalid SuperSpeedPlus isoc endpoint companion" | 
 | 			 "for config %d interface %d altsetting %d ep %d.\n", | 
 | 			 cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
 | 		return; | 
 | 	} | 
 | 	memcpy(&ep->ssp_isoc_ep_comp, desc, USB_DT_SSP_ISOC_EP_COMP_SIZE); | 
 | } | 
 |  | 
 | static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, | 
 | 		int inum, int asnum, struct usb_host_endpoint *ep, | 
 | 		unsigned char *buffer, int size) | 
 | { | 
 | 	struct usb_ss_ep_comp_descriptor *desc; | 
 | 	int max_tx; | 
 |  | 
 | 	/* The SuperSpeed endpoint companion descriptor is supposed to | 
 | 	 * be the first thing immediately following the endpoint descriptor. | 
 | 	 */ | 
 | 	desc = (struct usb_ss_ep_comp_descriptor *) buffer; | 
 |  | 
 | 	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP || | 
 | 			size < USB_DT_SS_EP_COMP_SIZE) { | 
 | 		dev_notice(ddev, "No SuperSpeed endpoint companion for config %d " | 
 | 				" interface %d altsetting %d ep %d: " | 
 | 				"using minimum values\n", | 
 | 				cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
 |  | 
 | 		/* Fill in some default values. | 
 | 		 * Leave bmAttributes as zero, which will mean no streams for | 
 | 		 * bulk, and isoc won't support multiple bursts of packets. | 
 | 		 * With bursts of only one packet, and a Mult of 1, the max | 
 | 		 * amount of data moved per endpoint service interval is one | 
 | 		 * packet. | 
 | 		 */ | 
 | 		ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE; | 
 | 		ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP; | 
 | 		if (usb_endpoint_xfer_isoc(&ep->desc) || | 
 | 				usb_endpoint_xfer_int(&ep->desc)) | 
 | 			ep->ss_ep_comp.wBytesPerInterval = | 
 | 					ep->desc.wMaxPacketSize; | 
 | 		return; | 
 | 	} | 
 | 	buffer += desc->bLength; | 
 | 	size -= desc->bLength; | 
 | 	memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE); | 
 |  | 
 | 	/* Check the various values */ | 
 | 	if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) { | 
 | 		dev_notice(ddev, "Control endpoint with bMaxBurst = %d in " | 
 | 				"config %d interface %d altsetting %d ep %d: " | 
 | 				"setting to zero\n", desc->bMaxBurst, | 
 | 				cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
 | 		ep->ss_ep_comp.bMaxBurst = 0; | 
 | 	} else if (desc->bMaxBurst > 15) { | 
 | 		dev_notice(ddev, "Endpoint with bMaxBurst = %d in " | 
 | 				"config %d interface %d altsetting %d ep %d: " | 
 | 				"setting to 15\n", desc->bMaxBurst, | 
 | 				cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
 | 		ep->ss_ep_comp.bMaxBurst = 15; | 
 | 	} | 
 |  | 
 | 	if ((usb_endpoint_xfer_control(&ep->desc) || | 
 | 			usb_endpoint_xfer_int(&ep->desc)) && | 
 | 				desc->bmAttributes != 0) { | 
 | 		dev_notice(ddev, "%s endpoint with bmAttributes = %d in " | 
 | 				"config %d interface %d altsetting %d ep %d: " | 
 | 				"setting to zero\n", | 
 | 				usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk", | 
 | 				desc->bmAttributes, | 
 | 				cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
 | 		ep->ss_ep_comp.bmAttributes = 0; | 
 | 	} else if (usb_endpoint_xfer_bulk(&ep->desc) && | 
 | 			desc->bmAttributes > 16) { | 
 | 		dev_notice(ddev, "Bulk endpoint with more than 65536 streams in " | 
 | 				"config %d interface %d altsetting %d ep %d: " | 
 | 				"setting to max\n", | 
 | 				cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
 | 		ep->ss_ep_comp.bmAttributes = 16; | 
 | 	} else if (usb_endpoint_xfer_isoc(&ep->desc) && | 
 | 		   !USB_SS_SSP_ISOC_COMP(desc->bmAttributes) && | 
 | 		   USB_SS_MULT(desc->bmAttributes) > 3) { | 
 | 		dev_notice(ddev, "Isoc endpoint has Mult of %d in " | 
 | 				"config %d interface %d altsetting %d ep %d: " | 
 | 				"setting to 3\n", | 
 | 				USB_SS_MULT(desc->bmAttributes), | 
 | 				cfgno, inum, asnum, ep->desc.bEndpointAddress); | 
 | 		ep->ss_ep_comp.bmAttributes = 2; | 
 | 	} | 
 |  | 
 | 	if (usb_endpoint_xfer_isoc(&ep->desc)) | 
 | 		max_tx = (desc->bMaxBurst + 1) * | 
 | 			(USB_SS_MULT(desc->bmAttributes)) * | 
 | 			usb_endpoint_maxp(&ep->desc); | 
 | 	else if (usb_endpoint_xfer_int(&ep->desc)) | 
 | 		max_tx = usb_endpoint_maxp(&ep->desc) * | 
 | 			(desc->bMaxBurst + 1); | 
 | 	else | 
 | 		max_tx = 999999; | 
 | 	if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) { | 
 | 		dev_notice(ddev, "%s endpoint with wBytesPerInterval of %d in " | 
 | 				"config %d interface %d altsetting %d ep %d: " | 
 | 				"setting to %d\n", | 
 | 				usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int", | 
 | 				le16_to_cpu(desc->wBytesPerInterval), | 
 | 				cfgno, inum, asnum, ep->desc.bEndpointAddress, | 
 | 				max_tx); | 
 | 		ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx); | 
 | 	} | 
 | 	/* Parse a possible SuperSpeedPlus isoc ep companion descriptor */ | 
 | 	if (usb_endpoint_xfer_isoc(&ep->desc) && | 
 | 	    USB_SS_SSP_ISOC_COMP(desc->bmAttributes)) | 
 | 		usb_parse_ssp_isoc_endpoint_companion(ddev, cfgno, inum, asnum, | 
 | 							ep, buffer, size); | 
 | } | 
 |  | 
 | static const unsigned short low_speed_maxpacket_maxes[4] = { | 
 | 	[USB_ENDPOINT_XFER_CONTROL] = 8, | 
 | 	[USB_ENDPOINT_XFER_ISOC] = 0, | 
 | 	[USB_ENDPOINT_XFER_BULK] = 0, | 
 | 	[USB_ENDPOINT_XFER_INT] = 8, | 
 | }; | 
 | static const unsigned short full_speed_maxpacket_maxes[4] = { | 
 | 	[USB_ENDPOINT_XFER_CONTROL] = 64, | 
 | 	[USB_ENDPOINT_XFER_ISOC] = 1023, | 
 | 	[USB_ENDPOINT_XFER_BULK] = 64, | 
 | 	[USB_ENDPOINT_XFER_INT] = 64, | 
 | }; | 
 | static const unsigned short high_speed_maxpacket_maxes[4] = { | 
 | 	[USB_ENDPOINT_XFER_CONTROL] = 64, | 
 | 	[USB_ENDPOINT_XFER_ISOC] = 1024, | 
 |  | 
 | 	/* Bulk should be 512, but some devices use 1024: we will warn below */ | 
 | 	[USB_ENDPOINT_XFER_BULK] = 1024, | 
 | 	[USB_ENDPOINT_XFER_INT] = 1024, | 
 | }; | 
 | static const unsigned short super_speed_maxpacket_maxes[4] = { | 
 | 	[USB_ENDPOINT_XFER_CONTROL] = 512, | 
 | 	[USB_ENDPOINT_XFER_ISOC] = 1024, | 
 | 	[USB_ENDPOINT_XFER_BULK] = 1024, | 
 | 	[USB_ENDPOINT_XFER_INT] = 1024, | 
 | }; | 
 |  | 
 | static bool endpoint_is_duplicate(struct usb_endpoint_descriptor *e1, | 
 | 		struct usb_endpoint_descriptor *e2) | 
 | { | 
 | 	if (e1->bEndpointAddress == e2->bEndpointAddress) | 
 | 		return true; | 
 |  | 
 | 	if (usb_endpoint_xfer_control(e1) || usb_endpoint_xfer_control(e2)) { | 
 | 		if (usb_endpoint_num(e1) == usb_endpoint_num(e2)) | 
 | 			return true; | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | /* | 
 |  * Check for duplicate endpoint addresses in other interfaces and in the | 
 |  * altsetting currently being parsed. | 
 |  */ | 
 | static bool config_endpoint_is_duplicate(struct usb_host_config *config, | 
 | 		int inum, int asnum, struct usb_endpoint_descriptor *d) | 
 | { | 
 | 	struct usb_endpoint_descriptor *epd; | 
 | 	struct usb_interface_cache *intfc; | 
 | 	struct usb_host_interface *alt; | 
 | 	int i, j, k; | 
 |  | 
 | 	for (i = 0; i < config->desc.bNumInterfaces; ++i) { | 
 | 		intfc = config->intf_cache[i]; | 
 |  | 
 | 		for (j = 0; j < intfc->num_altsetting; ++j) { | 
 | 			alt = &intfc->altsetting[j]; | 
 |  | 
 | 			if (alt->desc.bInterfaceNumber == inum && | 
 | 					alt->desc.bAlternateSetting != asnum) | 
 | 				continue; | 
 |  | 
 | 			for (k = 0; k < alt->desc.bNumEndpoints; ++k) { | 
 | 				epd = &alt->endpoint[k].desc; | 
 |  | 
 | 				if (endpoint_is_duplicate(epd, d)) | 
 | 					return true; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | static int usb_parse_endpoint(struct device *ddev, int cfgno, | 
 | 		struct usb_host_config *config, int inum, int asnum, | 
 | 		struct usb_host_interface *ifp, int num_ep, | 
 | 		unsigned char *buffer, int size) | 
 | { | 
 | 	struct usb_device *udev = to_usb_device(ddev); | 
 | 	unsigned char *buffer0 = buffer; | 
 | 	struct usb_endpoint_descriptor *d; | 
 | 	struct usb_host_endpoint *endpoint; | 
 | 	int n, i, j, retval; | 
 | 	unsigned int maxp; | 
 | 	const unsigned short *maxpacket_maxes; | 
 |  | 
 | 	d = (struct usb_endpoint_descriptor *) buffer; | 
 | 	buffer += d->bLength; | 
 | 	size -= d->bLength; | 
 |  | 
 | 	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE) | 
 | 		n = USB_DT_ENDPOINT_AUDIO_SIZE; | 
 | 	else if (d->bLength >= USB_DT_ENDPOINT_SIZE) | 
 | 		n = USB_DT_ENDPOINT_SIZE; | 
 | 	else { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d has an " | 
 | 		    "invalid endpoint descriptor of length %d, skipping\n", | 
 | 		    cfgno, inum, asnum, d->bLength); | 
 | 		goto skip_to_next_endpoint_or_interface_descriptor; | 
 | 	} | 
 |  | 
 | 	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK; | 
 | 	if (i >= 16 || i == 0) { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d has an " | 
 | 		    "invalid endpoint with address 0x%X, skipping\n", | 
 | 		    cfgno, inum, asnum, d->bEndpointAddress); | 
 | 		goto skip_to_next_endpoint_or_interface_descriptor; | 
 | 	} | 
 |  | 
 | 	/* Only store as many endpoints as we have room for */ | 
 | 	if (ifp->desc.bNumEndpoints >= num_ep) | 
 | 		goto skip_to_next_endpoint_or_interface_descriptor; | 
 |  | 
 | 	/* Save a copy of the descriptor and use it instead of the original */ | 
 | 	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; | 
 | 	memcpy(&endpoint->desc, d, n); | 
 | 	d = &endpoint->desc; | 
 |  | 
 | 	/* Clear the reserved bits in bEndpointAddress */ | 
 | 	i = d->bEndpointAddress & | 
 | 			(USB_ENDPOINT_DIR_MASK | USB_ENDPOINT_NUMBER_MASK); | 
 | 	if (i != d->bEndpointAddress) { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d has an endpoint descriptor with address 0x%X, changing to 0x%X\n", | 
 | 		    cfgno, inum, asnum, d->bEndpointAddress, i); | 
 | 		endpoint->desc.bEndpointAddress = i; | 
 | 	} | 
 |  | 
 | 	/* Check for duplicate endpoint addresses */ | 
 | 	if (config_endpoint_is_duplicate(config, inum, asnum, d)) { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", | 
 | 				cfgno, inum, asnum, d->bEndpointAddress); | 
 | 		goto skip_to_next_endpoint_or_interface_descriptor; | 
 | 	} | 
 |  | 
 | 	/* Ignore some endpoints */ | 
 | 	if (udev->quirks & USB_QUIRK_ENDPOINT_IGNORE) { | 
 | 		if (usb_endpoint_is_ignored(udev, ifp, d)) { | 
 | 			dev_notice(ddev, "config %d interface %d altsetting %d has an ignored endpoint with address 0x%X, skipping\n", | 
 | 					cfgno, inum, asnum, | 
 | 					d->bEndpointAddress); | 
 | 			goto skip_to_next_endpoint_or_interface_descriptor; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Accept this endpoint */ | 
 | 	++ifp->desc.bNumEndpoints; | 
 | 	INIT_LIST_HEAD(&endpoint->urb_list); | 
 |  | 
 | 	/* | 
 | 	 * Fix up bInterval values outside the legal range. | 
 | 	 * Use 10 or 8 ms if no proper value can be guessed. | 
 | 	 */ | 
 | 	i = 0;		/* i = min, j = max, n = default */ | 
 | 	j = 255; | 
 | 	if (usb_endpoint_xfer_int(d)) { | 
 | 		i = 1; | 
 | 		switch (udev->speed) { | 
 | 		case USB_SPEED_SUPER_PLUS: | 
 | 		case USB_SPEED_SUPER: | 
 | 		case USB_SPEED_HIGH: | 
 | 			/* | 
 | 			 * Many device manufacturers are using full-speed | 
 | 			 * bInterval values in high-speed interrupt endpoint | 
 | 			 * descriptors. Try to fix those and fall back to an | 
 | 			 * 8-ms default value otherwise. | 
 | 			 */ | 
 | 			n = fls(d->bInterval*8); | 
 | 			if (n == 0) | 
 | 				n = 7;	/* 8 ms = 2^(7-1) uframes */ | 
 | 			j = 16; | 
 |  | 
 | 			/* | 
 | 			 * Adjust bInterval for quirked devices. | 
 | 			 */ | 
 | 			/* | 
 | 			 * This quirk fixes bIntervals reported in ms. | 
 | 			 */ | 
 | 			if (udev->quirks & USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) { | 
 | 				n = clamp(fls(d->bInterval) + 3, i, j); | 
 | 				i = j = n; | 
 | 			} | 
 | 			/* | 
 | 			 * This quirk fixes bIntervals reported in | 
 | 			 * linear microframes. | 
 | 			 */ | 
 | 			if (udev->quirks & USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) { | 
 | 				n = clamp(fls(d->bInterval), i, j); | 
 | 				i = j = n; | 
 | 			} | 
 | 			break; | 
 | 		default:		/* USB_SPEED_FULL or _LOW */ | 
 | 			/* | 
 | 			 * For low-speed, 10 ms is the official minimum. | 
 | 			 * But some "overclocked" devices might want faster | 
 | 			 * polling so we'll allow it. | 
 | 			 */ | 
 | 			n = 10; | 
 | 			break; | 
 | 		} | 
 | 	} else if (usb_endpoint_xfer_isoc(d)) { | 
 | 		i = 1; | 
 | 		j = 16; | 
 | 		switch (udev->speed) { | 
 | 		case USB_SPEED_HIGH: | 
 | 			n = 7;		/* 8 ms = 2^(7-1) uframes */ | 
 | 			break; | 
 | 		default:		/* USB_SPEED_FULL */ | 
 | 			n = 4;		/* 8 ms = 2^(4-1) frames */ | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (d->bInterval < i || d->bInterval > j) { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d " | 
 | 		    "endpoint 0x%X has an invalid bInterval %d, " | 
 | 		    "changing to %d\n", | 
 | 		    cfgno, inum, asnum, | 
 | 		    d->bEndpointAddress, d->bInterval, n); | 
 | 		endpoint->desc.bInterval = n; | 
 | 	} | 
 |  | 
 | 	/* Some buggy low-speed devices have Bulk endpoints, which is | 
 | 	 * explicitly forbidden by the USB spec.  In an attempt to make | 
 | 	 * them usable, we will try treating them as Interrupt endpoints. | 
 | 	 */ | 
 | 	if (udev->speed == USB_SPEED_LOW && usb_endpoint_xfer_bulk(d)) { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d " | 
 | 		    "endpoint 0x%X is Bulk; changing to Interrupt\n", | 
 | 		    cfgno, inum, asnum, d->bEndpointAddress); | 
 | 		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT; | 
 | 		endpoint->desc.bInterval = 1; | 
 | 		if (usb_endpoint_maxp(&endpoint->desc) > 8) | 
 | 			endpoint->desc.wMaxPacketSize = cpu_to_le16(8); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Validate the wMaxPacketSize field. | 
 | 	 * Some devices have isochronous endpoints in altsetting 0; | 
 | 	 * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0 | 
 | 	 * (see the end of section 5.6.3), so don't warn about them. | 
 | 	 */ | 
 | 	maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize); | 
 | 	if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n", | 
 | 		    cfgno, inum, asnum, d->bEndpointAddress); | 
 | 	} | 
 |  | 
 | 	/* Find the highest legal maxpacket size for this endpoint */ | 
 | 	i = 0;		/* additional transactions per microframe */ | 
 | 	switch (udev->speed) { | 
 | 	case USB_SPEED_LOW: | 
 | 		maxpacket_maxes = low_speed_maxpacket_maxes; | 
 | 		break; | 
 | 	case USB_SPEED_FULL: | 
 | 		maxpacket_maxes = full_speed_maxpacket_maxes; | 
 | 		break; | 
 | 	case USB_SPEED_HIGH: | 
 | 		/* Multiple-transactions bits are allowed only for HS periodic endpoints */ | 
 | 		if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { | 
 | 			i = maxp & USB_EP_MAXP_MULT_MASK; | 
 | 			maxp &= ~i; | 
 | 		} | 
 | 		fallthrough; | 
 | 	default: | 
 | 		maxpacket_maxes = high_speed_maxpacket_maxes; | 
 | 		break; | 
 | 	case USB_SPEED_SUPER: | 
 | 	case USB_SPEED_SUPER_PLUS: | 
 | 		maxpacket_maxes = super_speed_maxpacket_maxes; | 
 | 		break; | 
 | 	} | 
 | 	j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)]; | 
 |  | 
 | 	if (maxp > j) { | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n", | 
 | 		    cfgno, inum, asnum, d->bEndpointAddress, maxp, j); | 
 | 		maxp = j; | 
 | 		endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Some buggy high speed devices have bulk endpoints using | 
 | 	 * maxpacket sizes other than 512.  High speed HCDs may not | 
 | 	 * be able to handle that particular bug, so let's warn... | 
 | 	 */ | 
 | 	if (udev->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) { | 
 | 		if (maxp != 512) | 
 | 			dev_notice(ddev, "config %d interface %d altsetting %d " | 
 | 				"bulk endpoint 0x%X has invalid maxpacket %d\n", | 
 | 				cfgno, inum, asnum, d->bEndpointAddress, | 
 | 				maxp); | 
 | 	} | 
 |  | 
 | 	/* Parse a possible SuperSpeed endpoint companion descriptor */ | 
 | 	if (udev->speed >= USB_SPEED_SUPER) | 
 | 		usb_parse_ss_endpoint_companion(ddev, cfgno, | 
 | 				inum, asnum, endpoint, buffer, size); | 
 |  | 
 | 	/* Skip over any Class Specific or Vendor Specific descriptors; | 
 | 	 * find the next endpoint or interface descriptor */ | 
 | 	endpoint->extra = buffer; | 
 | 	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | 
 | 			USB_DT_INTERFACE, &n); | 
 | 	endpoint->extralen = i; | 
 | 	retval = buffer - buffer0 + i; | 
 | 	if (n > 0) | 
 | 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | 
 | 		    n, plural(n), "endpoint"); | 
 | 	return retval; | 
 |  | 
 | skip_to_next_endpoint_or_interface_descriptor: | 
 | 	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | 
 | 	    USB_DT_INTERFACE, NULL); | 
 | 	return buffer - buffer0 + i; | 
 | } | 
 |  | 
 | void usb_release_interface_cache(struct kref *ref) | 
 | { | 
 | 	struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref); | 
 | 	int j; | 
 |  | 
 | 	for (j = 0; j < intfc->num_altsetting; j++) { | 
 | 		struct usb_host_interface *alt = &intfc->altsetting[j]; | 
 |  | 
 | 		kfree(alt->endpoint); | 
 | 		kfree(alt->string); | 
 | 	} | 
 | 	kfree(intfc); | 
 | } | 
 |  | 
 | static int usb_parse_interface(struct device *ddev, int cfgno, | 
 |     struct usb_host_config *config, unsigned char *buffer, int size, | 
 |     u8 inums[], u8 nalts[]) | 
 | { | 
 | 	unsigned char *buffer0 = buffer; | 
 | 	struct usb_interface_descriptor	*d; | 
 | 	int inum, asnum; | 
 | 	struct usb_interface_cache *intfc; | 
 | 	struct usb_host_interface *alt; | 
 | 	int i, n; | 
 | 	int len, retval; | 
 | 	int num_ep, num_ep_orig; | 
 |  | 
 | 	d = (struct usb_interface_descriptor *) buffer; | 
 | 	buffer += d->bLength; | 
 | 	size -= d->bLength; | 
 |  | 
 | 	if (d->bLength < USB_DT_INTERFACE_SIZE) | 
 | 		goto skip_to_next_interface_descriptor; | 
 |  | 
 | 	/* Which interface entry is this? */ | 
 | 	intfc = NULL; | 
 | 	inum = d->bInterfaceNumber; | 
 | 	for (i = 0; i < config->desc.bNumInterfaces; ++i) { | 
 | 		if (inums[i] == inum) { | 
 | 			intfc = config->intf_cache[i]; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (!intfc || intfc->num_altsetting >= nalts[i]) | 
 | 		goto skip_to_next_interface_descriptor; | 
 |  | 
 | 	/* Check for duplicate altsetting entries */ | 
 | 	asnum = d->bAlternateSetting; | 
 | 	for ((i = 0, alt = &intfc->altsetting[0]); | 
 | 	      i < intfc->num_altsetting; | 
 | 	     (++i, ++alt)) { | 
 | 		if (alt->desc.bAlternateSetting == asnum) { | 
 | 			dev_notice(ddev, "Duplicate descriptor for config %d " | 
 | 			    "interface %d altsetting %d, skipping\n", | 
 | 			    cfgno, inum, asnum); | 
 | 			goto skip_to_next_interface_descriptor; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	++intfc->num_altsetting; | 
 | 	memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE); | 
 |  | 
 | 	/* Skip over any Class Specific or Vendor Specific descriptors; | 
 | 	 * find the first endpoint or interface descriptor */ | 
 | 	alt->extra = buffer; | 
 | 	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT, | 
 | 	    USB_DT_INTERFACE, &n); | 
 | 	alt->extralen = i; | 
 | 	if (n > 0) | 
 | 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | 
 | 		    n, plural(n), "interface"); | 
 | 	buffer += i; | 
 | 	size -= i; | 
 |  | 
 | 	/* Allocate space for the right(?) number of endpoints */ | 
 | 	num_ep = num_ep_orig = alt->desc.bNumEndpoints; | 
 | 	alt->desc.bNumEndpoints = 0;		/* Use as a counter */ | 
 | 	if (num_ep > USB_MAXENDPOINTS) { | 
 | 		dev_notice(ddev, "too many endpoints for config %d interface %d " | 
 | 		    "altsetting %d: %d, using maximum allowed: %d\n", | 
 | 		    cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS); | 
 | 		num_ep = USB_MAXENDPOINTS; | 
 | 	} | 
 |  | 
 | 	if (num_ep > 0) { | 
 | 		/* Can't allocate 0 bytes */ | 
 | 		len = sizeof(struct usb_host_endpoint) * num_ep; | 
 | 		alt->endpoint = kzalloc(len, GFP_KERNEL); | 
 | 		if (!alt->endpoint) | 
 | 			return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* Parse all the endpoint descriptors */ | 
 | 	n = 0; | 
 | 	while (size > 0) { | 
 | 		if (((struct usb_descriptor_header *) buffer)->bDescriptorType | 
 | 		     == USB_DT_INTERFACE) | 
 | 			break; | 
 | 		retval = usb_parse_endpoint(ddev, cfgno, config, inum, asnum, | 
 | 				alt, num_ep, buffer, size); | 
 | 		if (retval < 0) | 
 | 			return retval; | 
 | 		++n; | 
 |  | 
 | 		buffer += retval; | 
 | 		size -= retval; | 
 | 	} | 
 |  | 
 | 	if (n != num_ep_orig) | 
 | 		dev_notice(ddev, "config %d interface %d altsetting %d has %d " | 
 | 		    "endpoint descriptor%s, different from the interface " | 
 | 		    "descriptor's value: %d\n", | 
 | 		    cfgno, inum, asnum, n, plural(n), num_ep_orig); | 
 | 	return buffer - buffer0; | 
 |  | 
 | skip_to_next_interface_descriptor: | 
 | 	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, | 
 | 	    USB_DT_INTERFACE, NULL); | 
 | 	return buffer - buffer0 + i; | 
 | } | 
 |  | 
 | static int usb_parse_configuration(struct usb_device *dev, int cfgidx, | 
 |     struct usb_host_config *config, unsigned char *buffer, int size) | 
 | { | 
 | 	struct device *ddev = &dev->dev; | 
 | 	unsigned char *buffer0 = buffer; | 
 | 	int cfgno; | 
 | 	int nintf, nintf_orig; | 
 | 	int i, j, n; | 
 | 	struct usb_interface_cache *intfc; | 
 | 	unsigned char *buffer2; | 
 | 	int size2; | 
 | 	struct usb_descriptor_header *header; | 
 | 	int retval; | 
 | 	u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES]; | 
 | 	unsigned iad_num = 0; | 
 |  | 
 | 	memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE); | 
 | 	nintf = nintf_orig = config->desc.bNumInterfaces; | 
 | 	config->desc.bNumInterfaces = 0;	// Adjusted later | 
 |  | 
 | 	if (config->desc.bDescriptorType != USB_DT_CONFIG || | 
 | 	    config->desc.bLength < USB_DT_CONFIG_SIZE || | 
 | 	    config->desc.bLength > size) { | 
 | 		dev_notice(ddev, "invalid descriptor for config index %d: " | 
 | 		    "type = 0x%X, length = %d\n", cfgidx, | 
 | 		    config->desc.bDescriptorType, config->desc.bLength); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cfgno = config->desc.bConfigurationValue; | 
 |  | 
 | 	buffer += config->desc.bLength; | 
 | 	size -= config->desc.bLength; | 
 |  | 
 | 	if (nintf > USB_MAXINTERFACES) { | 
 | 		dev_notice(ddev, "config %d has too many interfaces: %d, " | 
 | 		    "using maximum allowed: %d\n", | 
 | 		    cfgno, nintf, USB_MAXINTERFACES); | 
 | 		nintf = USB_MAXINTERFACES; | 
 | 	} | 
 |  | 
 | 	/* Go through the descriptors, checking their length and counting the | 
 | 	 * number of altsettings for each interface */ | 
 | 	n = 0; | 
 | 	for ((buffer2 = buffer, size2 = size); | 
 | 	      size2 > 0; | 
 | 	     (buffer2 += header->bLength, size2 -= header->bLength)) { | 
 |  | 
 | 		if (size2 < sizeof(struct usb_descriptor_header)) { | 
 | 			dev_notice(ddev, "config %d descriptor has %d excess " | 
 | 			    "byte%s, ignoring\n", | 
 | 			    cfgno, size2, plural(size2)); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		header = (struct usb_descriptor_header *) buffer2; | 
 | 		if ((header->bLength > size2) || (header->bLength < 2)) { | 
 | 			dev_notice(ddev, "config %d has an invalid descriptor " | 
 | 			    "of length %d, skipping remainder of the config\n", | 
 | 			    cfgno, header->bLength); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (header->bDescriptorType == USB_DT_INTERFACE) { | 
 | 			struct usb_interface_descriptor *d; | 
 | 			int inum; | 
 |  | 
 | 			d = (struct usb_interface_descriptor *) header; | 
 | 			if (d->bLength < USB_DT_INTERFACE_SIZE) { | 
 | 				dev_notice(ddev, "config %d has an invalid " | 
 | 				    "interface descriptor of length %d, " | 
 | 				    "skipping\n", cfgno, d->bLength); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			inum = d->bInterfaceNumber; | 
 |  | 
 | 			if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) && | 
 | 			    n >= nintf_orig) { | 
 | 				dev_notice(ddev, "config %d has more interface " | 
 | 				    "descriptors, than it declares in " | 
 | 				    "bNumInterfaces, ignoring interface " | 
 | 				    "number: %d\n", cfgno, inum); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			if (inum >= nintf_orig) | 
 | 				dev_notice(ddev, "config %d has an invalid " | 
 | 				    "interface number: %d but max is %d\n", | 
 | 				    cfgno, inum, nintf_orig - 1); | 
 |  | 
 | 			/* Have we already encountered this interface? | 
 | 			 * Count its altsettings */ | 
 | 			for (i = 0; i < n; ++i) { | 
 | 				if (inums[i] == inum) | 
 | 					break; | 
 | 			} | 
 | 			if (i < n) { | 
 | 				if (nalts[i] < 255) | 
 | 					++nalts[i]; | 
 | 			} else if (n < USB_MAXINTERFACES) { | 
 | 				inums[n] = inum; | 
 | 				nalts[n] = 1; | 
 | 				++n; | 
 | 			} | 
 |  | 
 | 		} else if (header->bDescriptorType == | 
 | 				USB_DT_INTERFACE_ASSOCIATION) { | 
 | 			struct usb_interface_assoc_descriptor *d; | 
 |  | 
 | 			d = (struct usb_interface_assoc_descriptor *)header; | 
 | 			if (d->bLength < USB_DT_INTERFACE_ASSOCIATION_SIZE) { | 
 | 				dev_notice(ddev, | 
 | 					 "config %d has an invalid interface association descriptor of length %d, skipping\n", | 
 | 					 cfgno, d->bLength); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			if (iad_num == USB_MAXIADS) { | 
 | 				dev_notice(ddev, "found more Interface " | 
 | 					       "Association Descriptors " | 
 | 					       "than allocated for in " | 
 | 					       "configuration %d\n", cfgno); | 
 | 			} else { | 
 | 				config->intf_assoc[iad_num] = d; | 
 | 				iad_num++; | 
 | 			} | 
 |  | 
 | 		} else if (header->bDescriptorType == USB_DT_DEVICE || | 
 | 			    header->bDescriptorType == USB_DT_CONFIG) | 
 | 			dev_notice(ddev, "config %d contains an unexpected " | 
 | 			    "descriptor of type 0x%X, skipping\n", | 
 | 			    cfgno, header->bDescriptorType); | 
 |  | 
 | 	}	/* for ((buffer2 = buffer, size2 = size); ...) */ | 
 | 	size = buffer2 - buffer; | 
 | 	config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0); | 
 |  | 
 | 	if (n != nintf) | 
 | 		dev_notice(ddev, "config %d has %d interface%s, different from " | 
 | 		    "the descriptor's value: %d\n", | 
 | 		    cfgno, n, plural(n), nintf_orig); | 
 | 	else if (n == 0) | 
 | 		dev_notice(ddev, "config %d has no interfaces?\n", cfgno); | 
 | 	config->desc.bNumInterfaces = nintf = n; | 
 |  | 
 | 	/* Check for missing interface numbers */ | 
 | 	for (i = 0; i < nintf; ++i) { | 
 | 		for (j = 0; j < nintf; ++j) { | 
 | 			if (inums[j] == i) | 
 | 				break; | 
 | 		} | 
 | 		if (j >= nintf) | 
 | 			dev_notice(ddev, "config %d has no interface number " | 
 | 			    "%d\n", cfgno, i); | 
 | 	} | 
 |  | 
 | 	/* Allocate the usb_interface_caches and altsetting arrays */ | 
 | 	for (i = 0; i < nintf; ++i) { | 
 | 		j = nalts[i]; | 
 | 		if (j > USB_MAXALTSETTING) { | 
 | 			dev_notice(ddev, "too many alternate settings for " | 
 | 			    "config %d interface %d: %d, " | 
 | 			    "using maximum allowed: %d\n", | 
 | 			    cfgno, inums[i], j, USB_MAXALTSETTING); | 
 | 			nalts[i] = j = USB_MAXALTSETTING; | 
 | 		} | 
 |  | 
 | 		intfc = kzalloc(struct_size(intfc, altsetting, j), GFP_KERNEL); | 
 | 		config->intf_cache[i] = intfc; | 
 | 		if (!intfc) | 
 | 			return -ENOMEM; | 
 | 		kref_init(&intfc->ref); | 
 | 	} | 
 |  | 
 | 	/* FIXME: parse the BOS descriptor */ | 
 |  | 
 | 	/* Skip over any Class Specific or Vendor Specific descriptors; | 
 | 	 * find the first interface descriptor */ | 
 | 	config->extra = buffer; | 
 | 	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE, | 
 | 	    USB_DT_INTERFACE, &n); | 
 | 	config->extralen = i; | 
 | 	if (n > 0) | 
 | 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n", | 
 | 		    n, plural(n), "configuration"); | 
 | 	buffer += i; | 
 | 	size -= i; | 
 |  | 
 | 	/* Parse all the interface/altsetting descriptors */ | 
 | 	while (size > 0) { | 
 | 		retval = usb_parse_interface(ddev, cfgno, config, | 
 | 		    buffer, size, inums, nalts); | 
 | 		if (retval < 0) | 
 | 			return retval; | 
 |  | 
 | 		buffer += retval; | 
 | 		size -= retval; | 
 | 	} | 
 |  | 
 | 	/* Check for missing altsettings */ | 
 | 	for (i = 0; i < nintf; ++i) { | 
 | 		intfc = config->intf_cache[i]; | 
 | 		for (j = 0; j < intfc->num_altsetting; ++j) { | 
 | 			for (n = 0; n < intfc->num_altsetting; ++n) { | 
 | 				if (intfc->altsetting[n].desc. | 
 | 				    bAlternateSetting == j) | 
 | 					break; | 
 | 			} | 
 | 			if (n >= intfc->num_altsetting) | 
 | 				dev_notice(ddev, "config %d interface %d has no " | 
 | 				    "altsetting %d\n", cfgno, inums[i], j); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* hub-only!! ... and only exported for reset/reinit path. | 
 |  * otherwise used internally on disconnect/destroy path | 
 |  */ | 
 | void usb_destroy_configuration(struct usb_device *dev) | 
 | { | 
 | 	int c, i; | 
 |  | 
 | 	if (!dev->config) | 
 | 		return; | 
 |  | 
 | 	if (dev->rawdescriptors) { | 
 | 		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) | 
 | 			kfree(dev->rawdescriptors[i]); | 
 |  | 
 | 		kfree(dev->rawdescriptors); | 
 | 		dev->rawdescriptors = NULL; | 
 | 	} | 
 |  | 
 | 	for (c = 0; c < dev->descriptor.bNumConfigurations; c++) { | 
 | 		struct usb_host_config *cf = &dev->config[c]; | 
 |  | 
 | 		kfree(cf->string); | 
 | 		for (i = 0; i < cf->desc.bNumInterfaces; i++) { | 
 | 			if (cf->intf_cache[i]) | 
 | 				kref_put(&cf->intf_cache[i]->ref, | 
 | 					  usb_release_interface_cache); | 
 | 		} | 
 | 	} | 
 | 	kfree(dev->config); | 
 | 	dev->config = NULL; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Get the USB config descriptors, cache and parse'em | 
 |  * | 
 |  * hub-only!! ... and only in reset path, or usb_new_device() | 
 |  * (used by real hubs and virtual root hubs) | 
 |  */ | 
 | int usb_get_configuration(struct usb_device *dev) | 
 | { | 
 | 	struct device *ddev = &dev->dev; | 
 | 	int ncfg = dev->descriptor.bNumConfigurations; | 
 | 	unsigned int cfgno, length; | 
 | 	unsigned char *bigbuffer; | 
 | 	struct usb_config_descriptor *desc; | 
 | 	int result; | 
 |  | 
 | 	if (ncfg > USB_MAXCONFIG) { | 
 | 		dev_notice(ddev, "too many configurations: %d, " | 
 | 		    "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG); | 
 | 		dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG; | 
 | 	} | 
 |  | 
 | 	if (ncfg < 1) { | 
 | 		dev_err(ddev, "no configurations\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	length = ncfg * sizeof(struct usb_host_config); | 
 | 	dev->config = kzalloc(length, GFP_KERNEL); | 
 | 	if (!dev->config) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	length = ncfg * sizeof(char *); | 
 | 	dev->rawdescriptors = kzalloc(length, GFP_KERNEL); | 
 | 	if (!dev->rawdescriptors) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); | 
 | 	if (!desc) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for (cfgno = 0; cfgno < ncfg; cfgno++) { | 
 | 		/* We grab just the first descriptor so we know how long | 
 | 		 * the whole configuration is */ | 
 | 		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, | 
 | 		    desc, USB_DT_CONFIG_SIZE); | 
 | 		if (result < 0) { | 
 | 			dev_err(ddev, "unable to read config index %d " | 
 | 			    "descriptor/%s: %d\n", cfgno, "start", result); | 
 | 			if (result != -EPIPE) | 
 | 				goto err; | 
 | 			dev_notice(ddev, "chopping to %d config(s)\n", cfgno); | 
 | 			dev->descriptor.bNumConfigurations = cfgno; | 
 | 			break; | 
 | 		} else if (result < 4) { | 
 | 			dev_err(ddev, "config index %d descriptor too short " | 
 | 			    "(expected %i, got %i)\n", cfgno, | 
 | 			    USB_DT_CONFIG_SIZE, result); | 
 | 			result = -EINVAL; | 
 | 			goto err; | 
 | 		} | 
 | 		length = max((int) le16_to_cpu(desc->wTotalLength), | 
 | 		    USB_DT_CONFIG_SIZE); | 
 |  | 
 | 		/* Now that we know the length, get the whole thing */ | 
 | 		bigbuffer = kmalloc(length, GFP_KERNEL); | 
 | 		if (!bigbuffer) { | 
 | 			result = -ENOMEM; | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		if (dev->quirks & USB_QUIRK_DELAY_INIT) | 
 | 			msleep(200); | 
 |  | 
 | 		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, | 
 | 		    bigbuffer, length); | 
 | 		if (result < 0) { | 
 | 			dev_err(ddev, "unable to read config index %d " | 
 | 			    "descriptor/%s\n", cfgno, "all"); | 
 | 			kfree(bigbuffer); | 
 | 			goto err; | 
 | 		} | 
 | 		if (result < length) { | 
 | 			dev_notice(ddev, "config index %d descriptor too short " | 
 | 			    "(expected %i, got %i)\n", cfgno, length, result); | 
 | 			length = result; | 
 | 		} | 
 |  | 
 | 		dev->rawdescriptors[cfgno] = bigbuffer; | 
 |  | 
 | 		result = usb_parse_configuration(dev, cfgno, | 
 | 		    &dev->config[cfgno], bigbuffer, length); | 
 | 		if (result < 0) { | 
 | 			++cfgno; | 
 | 			goto err; | 
 | 		} | 
 | 	} | 
 |  | 
 | err: | 
 | 	kfree(desc); | 
 | 	dev->descriptor.bNumConfigurations = cfgno; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | void usb_release_bos_descriptor(struct usb_device *dev) | 
 | { | 
 | 	if (dev->bos) { | 
 | 		kfree(dev->bos->desc); | 
 | 		kfree(dev->bos); | 
 | 		dev->bos = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static const __u8 bos_desc_len[256] = { | 
 | 	[USB_CAP_TYPE_WIRELESS_USB] = USB_DT_USB_WIRELESS_CAP_SIZE, | 
 | 	[USB_CAP_TYPE_EXT]          = USB_DT_USB_EXT_CAP_SIZE, | 
 | 	[USB_SS_CAP_TYPE]           = USB_DT_USB_SS_CAP_SIZE, | 
 | 	[USB_SSP_CAP_TYPE]          = USB_DT_USB_SSP_CAP_SIZE(1), | 
 | 	[CONTAINER_ID_TYPE]         = USB_DT_USB_SS_CONTN_ID_SIZE, | 
 | 	[USB_PTM_CAP_TYPE]          = USB_DT_USB_PTM_ID_SIZE, | 
 | }; | 
 |  | 
 | /* Get BOS descriptor set */ | 
 | int usb_get_bos_descriptor(struct usb_device *dev) | 
 | { | 
 | 	struct device *ddev = &dev->dev; | 
 | 	struct usb_bos_descriptor *bos; | 
 | 	struct usb_dev_cap_header *cap; | 
 | 	struct usb_ssp_cap_descriptor *ssp_cap; | 
 | 	unsigned char *buffer, *buffer0; | 
 | 	int length, total_len, num, i, ssac; | 
 | 	__u8 cap_type; | 
 | 	int ret; | 
 |  | 
 | 	bos = kzalloc(sizeof(*bos), GFP_KERNEL); | 
 | 	if (!bos) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Get BOS descriptor */ | 
 | 	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE); | 
 | 	if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) { | 
 | 		dev_notice(ddev, "unable to get BOS descriptor or descriptor too short\n"); | 
 | 		if (ret >= 0) | 
 | 			ret = -ENOMSG; | 
 | 		kfree(bos); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	length = bos->bLength; | 
 | 	total_len = le16_to_cpu(bos->wTotalLength); | 
 | 	num = bos->bNumDeviceCaps; | 
 | 	kfree(bos); | 
 | 	if (total_len < length) | 
 | 		return -EINVAL; | 
 |  | 
 | 	dev->bos = kzalloc(sizeof(*dev->bos), GFP_KERNEL); | 
 | 	if (!dev->bos) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Now let's get the whole BOS descriptor set */ | 
 | 	buffer = kzalloc(total_len, GFP_KERNEL); | 
 | 	if (!buffer) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 | 	dev->bos->desc = (struct usb_bos_descriptor *)buffer; | 
 |  | 
 | 	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len); | 
 | 	if (ret < total_len) { | 
 | 		dev_notice(ddev, "unable to get BOS descriptor set\n"); | 
 | 		if (ret >= 0) | 
 | 			ret = -ENOMSG; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	buffer0 = buffer; | 
 | 	total_len -= length; | 
 | 	buffer += length; | 
 |  | 
 | 	for (i = 0; i < num; i++) { | 
 | 		cap = (struct usb_dev_cap_header *)buffer; | 
 |  | 
 | 		if (total_len < sizeof(*cap) || total_len < cap->bLength) { | 
 | 			dev->bos->desc->bNumDeviceCaps = i; | 
 | 			break; | 
 | 		} | 
 | 		cap_type = cap->bDevCapabilityType; | 
 | 		length = cap->bLength; | 
 | 		if (bos_desc_len[cap_type] && length < bos_desc_len[cap_type]) { | 
 | 			dev->bos->desc->bNumDeviceCaps = i; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { | 
 | 			dev_notice(ddev, "descriptor type invalid, skip\n"); | 
 | 			goto skip_to_next_descriptor; | 
 | 		} | 
 |  | 
 | 		switch (cap_type) { | 
 | 		case USB_CAP_TYPE_EXT: | 
 | 			dev->bos->ext_cap = | 
 | 				(struct usb_ext_cap_descriptor *)buffer; | 
 | 			break; | 
 | 		case USB_SS_CAP_TYPE: | 
 | 			dev->bos->ss_cap = | 
 | 				(struct usb_ss_cap_descriptor *)buffer; | 
 | 			break; | 
 | 		case USB_SSP_CAP_TYPE: | 
 | 			ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; | 
 | 			ssac = (le32_to_cpu(ssp_cap->bmAttributes) & | 
 | 				USB_SSP_SUBLINK_SPEED_ATTRIBS); | 
 | 			if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) | 
 | 				dev->bos->ssp_cap = ssp_cap; | 
 | 			break; | 
 | 		case CONTAINER_ID_TYPE: | 
 | 			dev->bos->ss_id = | 
 | 				(struct usb_ss_container_id_descriptor *)buffer; | 
 | 			break; | 
 | 		case USB_PTM_CAP_TYPE: | 
 | 			dev->bos->ptm_cap = | 
 | 				(struct usb_ptm_cap_descriptor *)buffer; | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 |  | 
 | skip_to_next_descriptor: | 
 | 		total_len -= length; | 
 | 		buffer += length; | 
 | 	} | 
 | 	dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	usb_release_bos_descriptor(dev); | 
 | 	return ret; | 
 | } |