tools/testing/selftests/rseq/rseq-x86.h - third_party/kernel - Git at Google

 /* SPDX-License-Identifier: LGPL-2.1 OR MIT */
 /*
  * rseq-x86.h
  *
  * (C) Copyright 2016-2022 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
  */

 #ifndef RSEQ_H
 #error "Never use <rseq-x86.h> directly; include <rseq.h> instead."
 #endif

 #include <stdint.h>

 /*
  * RSEQ_SIG is used with the following reserved undefined instructions, which
  * trap in user-space:
  *
  * x86-32:    0f b9 3d 53 30 05 53      ud1    0x53053053,%edi
  * x86-64:    0f b9 3d 53 30 05 53      ud1    0x53053053(%rip),%edi
  */
 #define RSEQ_SIG	0x53053053

 /*
  * Due to a compiler optimization bug in gcc-8 with asm goto and TLS asm input
  * operands, we cannot use "m" input operands, and rather pass the __rseq_abi
  * address through a "r" input operand.
  */

 /* Offset of cpu_id, rseq_cs, and mm_cid fields in struct rseq. */
 #define RSEQ_CPU_ID_OFFSET	4
 #define RSEQ_CS_OFFSET		8
 #define RSEQ_MM_CID_OFFSET	24

 #ifdef __x86_64__

 #define RSEQ_ASM_TP_SEGMENT	%%fs

 #define rseq_smp_mb()	\
 	__asm__ __volatile__ ("lock; addl $0,-128(%%rsp)" ::: "memory", "cc")
 #define rseq_smp_rmb()	rseq_barrier()
 #define rseq_smp_wmb()	rseq_barrier()

 #define rseq_smp_load_acquire(p)					\
 __extension__ ({							\
 	rseq_unqual_scalar_typeof(*(p)) ____p1 = RSEQ_READ_ONCE(*(p));	\
 	rseq_barrier();							\
 	____p1;								\
 })

 #define rseq_smp_acquire__after_ctrl_dep()	rseq_smp_rmb()

 #define rseq_smp_store_release(p, v)					\
 do {									\
 	rseq_barrier();							\
 	RSEQ_WRITE_ONCE(*(p), v);					\
 } while (0)

 #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags,			\
 				start_ip, post_commit_offset, abort_ip)	\
 		".pushsection __rseq_cs, \"aw\"\n\t"			\
 		".balign 32\n\t"					\
 		__rseq_str(label) ":\n\t"				\
 		".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
 		".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
 		".popsection\n\t"					\
 		".pushsection __rseq_cs_ptr_array, \"aw\"\n\t"		\
 		".quad " __rseq_str(label) "b\n\t"			\
 		".popsection\n\t"


 #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
 	__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip,		\
 				(post_commit_ip - start_ip), abort_ip)

 /*
  * Exit points of a rseq critical section consist of all instructions outside
  * of the critical section where a critical section can either branch to or
  * reach through the normal course of its execution. The abort IP and the
  * post-commit IP are already part of the __rseq_cs section and should not be
  * explicitly defined as additional exit points. Knowing all exit points is
  * useful to assist debuggers stepping over the critical section.
  */
 #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip)			\
 		".pushsection __rseq_exit_point_array, \"aw\"\n\t"	\
 		".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
 		".popsection\n\t"

 #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs)		\
 		RSEQ_INJECT_ASM(1)					\
 		"leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t"	\
 		"movq %%rax, " __rseq_str(rseq_cs) "\n\t"		\
 		__rseq_str(label) ":\n\t"

 #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label)		\
 		RSEQ_INJECT_ASM(2)					\
 		"cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
 		"jnz " __rseq_str(label) "\n\t"

 #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label)		\
 		".pushsection __rseq_failure, \"ax\"\n\t"		\
 		/* Disassembler-friendly signature: ud1 <sig>(%rip),%edi. */ \
 		".byte 0x0f, 0xb9, 0x3d\n\t"				\
 		".long " __rseq_str(RSEQ_SIG) "\n\t"			\
 		__rseq_str(label) ":\n\t"				\
 		teardown						\
 		"jmp %l[" __rseq_str(abort_label) "]\n\t"		\
 		".popsection\n\t"

 #define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label)		\
 		".pushsection __rseq_failure, \"ax\"\n\t"		\
 		__rseq_str(label) ":\n\t"				\
 		teardown						\
 		"jmp %l[" __rseq_str(cmpfail_label) "]\n\t"		\
 		".popsection\n\t"

 #elif defined(__i386__)

 #define RSEQ_ASM_TP_SEGMENT	%%gs

 #define rseq_smp_mb()	\
 	__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
 #define rseq_smp_rmb()	\
 	__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
 #define rseq_smp_wmb()	\
 	__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")

 #define rseq_smp_load_acquire(p)					\
 __extension__ ({							\
 	__typeof(*p) ____p1 = RSEQ_READ_ONCE(*p);			\
 	rseq_smp_mb();							\
 	____p1;								\
 })

 #define rseq_smp_acquire__after_ctrl_dep()	rseq_smp_rmb()

 #define rseq_smp_store_release(p, v)					\
 do {									\
 	rseq_smp_mb();							\
 	RSEQ_WRITE_ONCE(*p, v);						\
 } while (0)

 /*
  * Use eax as scratch register and take memory operands as input to
  * lessen register pressure. Especially needed when compiling in O0.
  */
 #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags,			\
 				start_ip, post_commit_offset, abort_ip)	\
 		".pushsection __rseq_cs, \"aw\"\n\t"			\
 		".balign 32\n\t"					\
 		__rseq_str(label) ":\n\t"				\
 		".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
 		".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
 		".popsection\n\t"					\
 		".pushsection __rseq_cs_ptr_array, \"aw\"\n\t"		\
 		".long " __rseq_str(label) "b, 0x0\n\t"			\
 		".popsection\n\t"

 #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
 	__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip,		\
 				(post_commit_ip - start_ip), abort_ip)

 /*
  * Exit points of a rseq critical section consist of all instructions outside
  * of the critical section where a critical section can either branch to or
  * reach through the normal course of its execution. The abort IP and the
  * post-commit IP are already part of the __rseq_cs section and should not be
  * explicitly defined as additional exit points. Knowing all exit points is
  * useful to assist debuggers stepping over the critical section.
  */
 #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip)			\
 		".pushsection __rseq_exit_point_array, \"aw\"\n\t"	\
 		".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \
 		".popsection\n\t"

 #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs)		\
 		RSEQ_INJECT_ASM(1)					\
 		"movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t"	\
 		__rseq_str(label) ":\n\t"

 #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label)		\
 		RSEQ_INJECT_ASM(2)					\
 		"cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
 		"jnz " __rseq_str(label) "\n\t"

 #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label)		\
 		".pushsection __rseq_failure, \"ax\"\n\t"		\
 		/* Disassembler-friendly signature: ud1 <sig>,%edi. */	\
 		".byte 0x0f, 0xb9, 0x3d\n\t"				\
 		".long " __rseq_str(RSEQ_SIG) "\n\t"			\
 		__rseq_str(label) ":\n\t"				\
 		teardown						\
 		"jmp %l[" __rseq_str(abort_label) "]\n\t"		\
 		".popsection\n\t"

 #define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label)		\
 		".pushsection __rseq_failure, \"ax\"\n\t"		\
 		__rseq_str(label) ":\n\t"				\
 		teardown						\
 		"jmp %l[" __rseq_str(cmpfail_label) "]\n\t"		\
 		".popsection\n\t"

 #endif

 /* Per-cpu-id indexing. */

 #define RSEQ_TEMPLATE_CPU_ID
 #define RSEQ_TEMPLATE_MO_RELAXED
 #include "rseq-x86-bits.h"
 #undef RSEQ_TEMPLATE_MO_RELAXED

 #define RSEQ_TEMPLATE_MO_RELEASE
 #include "rseq-x86-bits.h"
 #undef RSEQ_TEMPLATE_MO_RELEASE
 #undef RSEQ_TEMPLATE_CPU_ID

 /* Per-mm-cid indexing. */

 #define RSEQ_TEMPLATE_MM_CID
 #define RSEQ_TEMPLATE_MO_RELAXED
 #include "rseq-x86-bits.h"
 #undef RSEQ_TEMPLATE_MO_RELAXED

 #define RSEQ_TEMPLATE_MO_RELEASE
 #include "rseq-x86-bits.h"
 #undef RSEQ_TEMPLATE_MO_RELEASE
 #undef RSEQ_TEMPLATE_MM_CID

 /* APIs which are not based on cpu ids. */

 #define RSEQ_TEMPLATE_CPU_ID_NONE
 #define RSEQ_TEMPLATE_MO_RELAXED
 #include "rseq-x86-bits.h"
 #undef RSEQ_TEMPLATE_MO_RELAXED
 #undef RSEQ_TEMPLATE_CPU_ID_NONE
	/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
	/*
	* rseq-x86.h
	*
	* (C) Copyright 2016-2022 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
	*/

	#ifndef RSEQ_H
	#error "Never use <rseq-x86.h> directly; include <rseq.h> instead."
	#endif

	#include <stdint.h>

	/*
	* RSEQ_SIG is used with the following reserved undefined instructions, which
	* trap in user-space:
	*
	* x86-32: 0f b9 3d 53 30 05 53 ud1 0x53053053,%edi
	* x86-64: 0f b9 3d 53 30 05 53 ud1 0x53053053(%rip),%edi
	*/
	#define RSEQ_SIG 0x53053053

	/*
	* Due to a compiler optimization bug in gcc-8 with asm goto and TLS asm input
	* operands, we cannot use "m" input operands, and rather pass the __rseq_abi
	* address through a "r" input operand.
	*/

	/* Offset of cpu_id, rseq_cs, and mm_cid fields in struct rseq. */
	#define RSEQ_CPU_ID_OFFSET 4
	#define RSEQ_CS_OFFSET 8
	#define RSEQ_MM_CID_OFFSET 24

	#ifdef __x86_64__

	#define RSEQ_ASM_TP_SEGMENT %%fs

	#define rseq_smp_mb() \
	__asm__ __volatile__ ("lock; addl $0,-128(%%rsp)" ::: "memory", "cc")
	#define rseq_smp_rmb() rseq_barrier()
	#define rseq_smp_wmb() rseq_barrier()

	#define rseq_smp_load_acquire(p) \
	__extension__ ({ \
	rseq_unqual_scalar_typeof((p)) ____p1 = RSEQ_READ_ONCE((p)); \
	rseq_barrier(); \
	____p1; \
	})

	#define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb()

	#define rseq_smp_store_release(p, v) \
	do { \
	rseq_barrier(); \
	RSEQ_WRITE_ONCE(*(p), v); \
	} while (0)

	#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
	start_ip, post_commit_offset, abort_ip) \
	".pushsection __rseq_cs, \"aw\"\n\t" \
	".balign 32\n\t" \
	__rseq_str(label) ":\n\t" \
	".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
	".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
	".popsection\n\t" \
	".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
	".quad " __rseq_str(label) "b\n\t" \
	".popsection\n\t"


	#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
	__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
	(post_commit_ip - start_ip), abort_ip)

	/*
	* Exit points of a rseq critical section consist of all instructions outside
	* of the critical section where a critical section can either branch to or
	* reach through the normal course of its execution. The abort IP and the
	* post-commit IP are already part of the __rseq_cs section and should not be
	* explicitly defined as additional exit points. Knowing all exit points is
	* useful to assist debuggers stepping over the critical section.
	*/
	#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
	".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
	".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
	".popsection\n\t"

	#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
	RSEQ_INJECT_ASM(1) \
	"leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t" \
	"movq %%rax, " __rseq_str(rseq_cs) "\n\t" \
	__rseq_str(label) ":\n\t"

	#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
	RSEQ_INJECT_ASM(2) \
	"cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
	"jnz " __rseq_str(label) "\n\t"

	#define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \
	".pushsection __rseq_failure, \"ax\"\n\t" \
	/* Disassembler-friendly signature: ud1 <sig>(%rip),%edi. */ \
	".byte 0x0f, 0xb9, 0x3d\n\t" \
	".long " __rseq_str(RSEQ_SIG) "\n\t" \
	__rseq_str(label) ":\n\t" \
	teardown \
	"jmp %l[" __rseq_str(abort_label) "]\n\t" \
	".popsection\n\t"

	#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \
	".pushsection __rseq_failure, \"ax\"\n\t" \
	__rseq_str(label) ":\n\t" \
	teardown \
	"jmp %l[" __rseq_str(cmpfail_label) "]\n\t" \
	".popsection\n\t"

	#elif defined(__i386__)

	#define RSEQ_ASM_TP_SEGMENT %%gs

	#define rseq_smp_mb() \
	__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
	#define rseq_smp_rmb() \
	__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
	#define rseq_smp_wmb() \
	__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")

	#define rseq_smp_load_acquire(p) \
	__extension__ ({ \
	__typeof(p) ____p1 = RSEQ_READ_ONCE(p); \
	rseq_smp_mb(); \
	____p1; \
	})

	#define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb()

	#define rseq_smp_store_release(p, v) \
	do { \
	rseq_smp_mb(); \
	RSEQ_WRITE_ONCE(*p, v); \
	} while (0)

	/*
	* Use eax as scratch register and take memory operands as input to
	* lessen register pressure. Especially needed when compiling in O0.
	*/
	#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
	start_ip, post_commit_offset, abort_ip) \
	".pushsection __rseq_cs, \"aw\"\n\t" \
	".balign 32\n\t" \
	__rseq_str(label) ":\n\t" \
	".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
	".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
	".popsection\n\t" \
	".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
	".long " __rseq_str(label) "b, 0x0\n\t" \
	".popsection\n\t"

	#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
	__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
	(post_commit_ip - start_ip), abort_ip)

	/*
	* Exit points of a rseq critical section consist of all instructions outside
	* of the critical section where a critical section can either branch to or
	* reach through the normal course of its execution. The abort IP and the
	* post-commit IP are already part of the __rseq_cs section and should not be
	* explicitly defined as additional exit points. Knowing all exit points is
	* useful to assist debuggers stepping over the critical section.
	*/
	#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
	".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
	".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \
	".popsection\n\t"

	#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
	RSEQ_INJECT_ASM(1) \
	"movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t" \
	__rseq_str(label) ":\n\t"

	#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
	RSEQ_INJECT_ASM(2) \
	"cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
	"jnz " __rseq_str(label) "\n\t"

	#define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \
	".pushsection __rseq_failure, \"ax\"\n\t" \
	/* Disassembler-friendly signature: ud1 <sig>,%edi. */ \
	".byte 0x0f, 0xb9, 0x3d\n\t" \
	".long " __rseq_str(RSEQ_SIG) "\n\t" \
	__rseq_str(label) ":\n\t" \
	teardown \
	"jmp %l[" __rseq_str(abort_label) "]\n\t" \
	".popsection\n\t"

	#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \
	".pushsection __rseq_failure, \"ax\"\n\t" \
	__rseq_str(label) ":\n\t" \
	teardown \
	"jmp %l[" __rseq_str(cmpfail_label) "]\n\t" \
	".popsection\n\t"

	#endif

	/* Per-cpu-id indexing. */

	#define RSEQ_TEMPLATE_CPU_ID
	#define RSEQ_TEMPLATE_MO_RELAXED
	#include "rseq-x86-bits.h"
	#undef RSEQ_TEMPLATE_MO_RELAXED

	#define RSEQ_TEMPLATE_MO_RELEASE
	#include "rseq-x86-bits.h"
	#undef RSEQ_TEMPLATE_MO_RELEASE
	#undef RSEQ_TEMPLATE_CPU_ID

	/* Per-mm-cid indexing. */

	#define RSEQ_TEMPLATE_MM_CID
	#define RSEQ_TEMPLATE_MO_RELAXED
	#include "rseq-x86-bits.h"
	#undef RSEQ_TEMPLATE_MO_RELAXED

	#define RSEQ_TEMPLATE_MO_RELEASE
	#include "rseq-x86-bits.h"
	#undef RSEQ_TEMPLATE_MO_RELEASE
	#undef RSEQ_TEMPLATE_MM_CID

	/* APIs which are not based on cpu ids. */

	#define RSEQ_TEMPLATE_CPU_ID_NONE
	#define RSEQ_TEMPLATE_MO_RELAXED
	#include "rseq-x86-bits.h"
	#undef RSEQ_TEMPLATE_MO_RELAXED
	#undef RSEQ_TEMPLATE_CPU_ID_NONE