|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * This is the linux wireless configuration interface. | 
|  | * | 
|  | * Copyright 2006-2010		Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2013-2014  Intel Mobile Communications GmbH | 
|  | * Copyright 2015-2017	Intel Deutschland GmbH | 
|  | * Copyright (C) 2018-2019 Intel Corporation | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/if.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/nl80211.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/sched.h> | 
|  | #include <net/genetlink.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include "nl80211.h" | 
|  | #include "core.h" | 
|  | #include "sysfs.h" | 
|  | #include "debugfs.h" | 
|  | #include "wext-compat.h" | 
|  | #include "rdev-ops.h" | 
|  |  | 
|  | /* name for sysfs, %d is appended */ | 
|  | #define PHY_NAME "phy" | 
|  |  | 
|  | MODULE_AUTHOR("Johannes Berg"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("wireless configuration support"); | 
|  | MODULE_ALIAS_GENL_FAMILY(NL80211_GENL_NAME); | 
|  |  | 
|  | /* RCU-protected (and RTNL for writers) */ | 
|  | LIST_HEAD(cfg80211_rdev_list); | 
|  | int cfg80211_rdev_list_generation; | 
|  |  | 
|  | /* for debugfs */ | 
|  | static struct dentry *ieee80211_debugfs_dir; | 
|  |  | 
|  | /* for the cleanup, scan and event works */ | 
|  | struct workqueue_struct *cfg80211_wq; | 
|  |  | 
|  | static bool cfg80211_disable_40mhz_24ghz; | 
|  | module_param(cfg80211_disable_40mhz_24ghz, bool, 0644); | 
|  | MODULE_PARM_DESC(cfg80211_disable_40mhz_24ghz, | 
|  | "Disable 40MHz support in the 2.4GHz band"); | 
|  |  | 
|  | struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx) | 
|  | { | 
|  | struct cfg80211_registered_device *result = NULL, *rdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | 
|  | if (rdev->wiphy_idx == wiphy_idx) { | 
|  | result = rdev; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | int get_wiphy_idx(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | return rdev->wiphy_idx; | 
|  | } | 
|  |  | 
|  | struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx); | 
|  | if (!rdev) | 
|  | return NULL; | 
|  | return &rdev->wiphy; | 
|  | } | 
|  |  | 
|  | static int cfg80211_dev_check_name(struct cfg80211_registered_device *rdev, | 
|  | const char *newname) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev2; | 
|  | int wiphy_idx, taken = -1, digits; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (strlen(newname) > NL80211_WIPHY_NAME_MAXLEN) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* prohibit calling the thing phy%d when %d is not its number */ | 
|  | sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken); | 
|  | if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) { | 
|  | /* count number of places needed to print wiphy_idx */ | 
|  | digits = 1; | 
|  | while (wiphy_idx /= 10) | 
|  | digits++; | 
|  | /* | 
|  | * deny the name if it is phy<idx> where <idx> is printed | 
|  | * without leading zeroes. taken == strlen(newname) here | 
|  | */ | 
|  | if (taken == strlen(PHY_NAME) + digits) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Ensure another device does not already have this name. */ | 
|  | list_for_each_entry(rdev2, &cfg80211_rdev_list, list) | 
|  | if (strcmp(newname, wiphy_name(&rdev2->wiphy)) == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int cfg80211_dev_rename(struct cfg80211_registered_device *rdev, | 
|  | char *newname) | 
|  | { | 
|  | int result; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | /* Ignore nop renames */ | 
|  | if (strcmp(newname, wiphy_name(&rdev->wiphy)) == 0) | 
|  | return 0; | 
|  |  | 
|  | result = cfg80211_dev_check_name(rdev, newname); | 
|  | if (result < 0) | 
|  | return result; | 
|  |  | 
|  | result = device_rename(&rdev->wiphy.dev, newname); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(rdev->wiphy.debugfsdir)) | 
|  | debugfs_rename(rdev->wiphy.debugfsdir->d_parent, | 
|  | rdev->wiphy.debugfsdir, | 
|  | rdev->wiphy.debugfsdir->d_parent, newname); | 
|  |  | 
|  | nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int cfg80211_switch_netns(struct cfg80211_registered_device *rdev, | 
|  | struct net *net) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  | int err = 0; | 
|  |  | 
|  | if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { | 
|  | if (!wdev->netdev) | 
|  | continue; | 
|  | wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL; | 
|  | err = dev_change_net_namespace(wdev->netdev, net, "wlan%d"); | 
|  | if (err) | 
|  | break; | 
|  | wdev->netdev->features |= NETIF_F_NETNS_LOCAL; | 
|  | } | 
|  |  | 
|  | if (err) { | 
|  | /* failed -- clean up to old netns */ | 
|  | net = wiphy_net(&rdev->wiphy); | 
|  |  | 
|  | list_for_each_entry_continue_reverse(wdev, | 
|  | &rdev->wiphy.wdev_list, | 
|  | list) { | 
|  | if (!wdev->netdev) | 
|  | continue; | 
|  | wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL; | 
|  | err = dev_change_net_namespace(wdev->netdev, net, | 
|  | "wlan%d"); | 
|  | WARN_ON(err); | 
|  | wdev->netdev->features |= NETIF_F_NETNS_LOCAL; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { | 
|  | if (!wdev->netdev) | 
|  | continue; | 
|  | nl80211_notify_iface(rdev, wdev, NL80211_CMD_DEL_INTERFACE); | 
|  | } | 
|  | nl80211_notify_wiphy(rdev, NL80211_CMD_DEL_WIPHY); | 
|  |  | 
|  | wiphy_net_set(&rdev->wiphy, net); | 
|  |  | 
|  | err = device_rename(&rdev->wiphy.dev, dev_name(&rdev->wiphy.dev)); | 
|  | WARN_ON(err); | 
|  |  | 
|  | nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY); | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { | 
|  | if (!wdev->netdev) | 
|  | continue; | 
|  | nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = data; | 
|  |  | 
|  | rdev_rfkill_poll(rdev); | 
|  | } | 
|  |  | 
|  | void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, | 
|  | struct wireless_dev *wdev) | 
|  | { | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)) | 
|  | return; | 
|  |  | 
|  | if (!wdev_running(wdev)) | 
|  | return; | 
|  |  | 
|  | rdev_stop_p2p_device(rdev, wdev); | 
|  | wdev->is_running = false; | 
|  |  | 
|  | rdev->opencount--; | 
|  |  | 
|  | if (rdev->scan_req && rdev->scan_req->wdev == wdev) { | 
|  | if (WARN_ON(!rdev->scan_req->notified)) | 
|  | rdev->scan_req->info.aborted = true; | 
|  | ___cfg80211_scan_done(rdev, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | void cfg80211_stop_nan(struct cfg80211_registered_device *rdev, | 
|  | struct wireless_dev *wdev) | 
|  | { | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (WARN_ON(wdev->iftype != NL80211_IFTYPE_NAN)) | 
|  | return; | 
|  |  | 
|  | if (!wdev_running(wdev)) | 
|  | return; | 
|  |  | 
|  | rdev_stop_nan(rdev, wdev); | 
|  | wdev->is_running = false; | 
|  |  | 
|  | rdev->opencount--; | 
|  | } | 
|  |  | 
|  | void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { | 
|  | if (wdev->netdev) { | 
|  | dev_close(wdev->netdev); | 
|  | continue; | 
|  | } | 
|  | /* otherwise, check iftype */ | 
|  | switch (wdev->iftype) { | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | cfg80211_stop_p2p_device(rdev, wdev); | 
|  | break; | 
|  | case NL80211_IFTYPE_NAN: | 
|  | cfg80211_stop_nan(rdev, wdev); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cfg80211_shutdown_all_interfaces); | 
|  |  | 
|  | static int cfg80211_rfkill_set_block(void *data, bool blocked) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = data; | 
|  |  | 
|  | if (!blocked) | 
|  | return 0; | 
|  |  | 
|  | rtnl_lock(); | 
|  | cfg80211_shutdown_all_interfaces(&rdev->wiphy); | 
|  | rtnl_unlock(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cfg80211_rfkill_block_work(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | rfkill_block); | 
|  | cfg80211_rfkill_set_block(rdev, true); | 
|  | } | 
|  |  | 
|  | static void cfg80211_event_work(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | event_work); | 
|  |  | 
|  | rtnl_lock(); | 
|  | cfg80211_process_rdev_events(rdev); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | void cfg80211_destroy_ifaces(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct wireless_dev *wdev, *tmp; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | list_for_each_entry_safe(wdev, tmp, &rdev->wiphy.wdev_list, list) { | 
|  | if (wdev->nl_owner_dead) | 
|  | rdev_del_virtual_intf(rdev, wdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void cfg80211_destroy_iface_wk(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | destroy_work); | 
|  |  | 
|  | rtnl_lock(); | 
|  | cfg80211_destroy_ifaces(rdev); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void cfg80211_sched_scan_stop_wk(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct cfg80211_sched_scan_request *req, *tmp; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | sched_scan_stop_wk); | 
|  |  | 
|  | rtnl_lock(); | 
|  | list_for_each_entry_safe(req, tmp, &rdev->sched_scan_req_list, list) { | 
|  | if (req->nl_owner_dead) | 
|  | cfg80211_stop_sched_scan_req(rdev, req, false); | 
|  | } | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void cfg80211_propagate_radar_detect_wk(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | propagate_radar_detect_wk); | 
|  |  | 
|  | rtnl_lock(); | 
|  |  | 
|  | regulatory_propagate_dfs_state(&rdev->wiphy, &rdev->radar_chandef, | 
|  | NL80211_DFS_UNAVAILABLE, | 
|  | NL80211_RADAR_DETECTED); | 
|  |  | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void cfg80211_propagate_cac_done_wk(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | propagate_cac_done_wk); | 
|  |  | 
|  | rtnl_lock(); | 
|  |  | 
|  | regulatory_propagate_dfs_state(&rdev->wiphy, &rdev->cac_done_chandef, | 
|  | NL80211_DFS_AVAILABLE, | 
|  | NL80211_RADAR_CAC_FINISHED); | 
|  |  | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | /* exported functions */ | 
|  |  | 
|  | struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv, | 
|  | const char *requested_name) | 
|  | { | 
|  | static atomic_t wiphy_counter = ATOMIC_INIT(0); | 
|  |  | 
|  | struct cfg80211_registered_device *rdev; | 
|  | int alloc_size; | 
|  |  | 
|  | WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key)); | 
|  | WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc)); | 
|  | WARN_ON(ops->connect && !ops->disconnect); | 
|  | WARN_ON(ops->join_ibss && !ops->leave_ibss); | 
|  | WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf); | 
|  | WARN_ON(ops->add_station && !ops->del_station); | 
|  | WARN_ON(ops->add_mpath && !ops->del_mpath); | 
|  | WARN_ON(ops->join_mesh && !ops->leave_mesh); | 
|  | WARN_ON(ops->start_p2p_device && !ops->stop_p2p_device); | 
|  | WARN_ON(ops->start_ap && !ops->stop_ap); | 
|  | WARN_ON(ops->join_ocb && !ops->leave_ocb); | 
|  | WARN_ON(ops->suspend && !ops->resume); | 
|  | WARN_ON(ops->sched_scan_start && !ops->sched_scan_stop); | 
|  | WARN_ON(ops->remain_on_channel && !ops->cancel_remain_on_channel); | 
|  | WARN_ON(ops->tdls_channel_switch && !ops->tdls_cancel_channel_switch); | 
|  | WARN_ON(ops->add_tx_ts && !ops->del_tx_ts); | 
|  |  | 
|  | alloc_size = sizeof(*rdev) + sizeof_priv; | 
|  |  | 
|  | rdev = kzalloc(alloc_size, GFP_KERNEL); | 
|  | if (!rdev) | 
|  | return NULL; | 
|  |  | 
|  | rdev->ops = ops; | 
|  |  | 
|  | rdev->wiphy_idx = atomic_inc_return(&wiphy_counter); | 
|  |  | 
|  | if (unlikely(rdev->wiphy_idx < 0)) { | 
|  | /* ugh, wrapped! */ | 
|  | atomic_dec(&wiphy_counter); | 
|  | kfree(rdev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* atomic_inc_return makes it start at 1, make it start at 0 */ | 
|  | rdev->wiphy_idx--; | 
|  |  | 
|  | /* give it a proper name */ | 
|  | if (requested_name && requested_name[0]) { | 
|  | int rv; | 
|  |  | 
|  | rtnl_lock(); | 
|  | rv = cfg80211_dev_check_name(rdev, requested_name); | 
|  |  | 
|  | if (rv < 0) { | 
|  | rtnl_unlock(); | 
|  | goto use_default_name; | 
|  | } | 
|  |  | 
|  | rv = dev_set_name(&rdev->wiphy.dev, "%s", requested_name); | 
|  | rtnl_unlock(); | 
|  | if (rv) | 
|  | goto use_default_name; | 
|  | } else { | 
|  | int rv; | 
|  |  | 
|  | use_default_name: | 
|  | /* NOTE:  This is *probably* safe w/out holding rtnl because of | 
|  | * the restrictions on phy names.  Probably this call could | 
|  | * fail if some other part of the kernel (re)named a device | 
|  | * phyX.  But, might should add some locking and check return | 
|  | * value, and use a different name if this one exists? | 
|  | */ | 
|  | rv = dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx); | 
|  | if (rv < 0) { | 
|  | kfree(rdev); | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&rdev->wiphy.wdev_list); | 
|  | INIT_LIST_HEAD(&rdev->beacon_registrations); | 
|  | spin_lock_init(&rdev->beacon_registrations_lock); | 
|  | spin_lock_init(&rdev->bss_lock); | 
|  | INIT_LIST_HEAD(&rdev->bss_list); | 
|  | INIT_LIST_HEAD(&rdev->sched_scan_req_list); | 
|  | INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done); | 
|  | INIT_LIST_HEAD(&rdev->mlme_unreg); | 
|  | spin_lock_init(&rdev->mlme_unreg_lock); | 
|  | INIT_WORK(&rdev->mlme_unreg_wk, cfg80211_mlme_unreg_wk); | 
|  | INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk, | 
|  | cfg80211_dfs_channels_update_work); | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | rdev->wiphy.wext = &cfg80211_wext_handler; | 
|  | #endif | 
|  |  | 
|  | device_initialize(&rdev->wiphy.dev); | 
|  | rdev->wiphy.dev.class = &ieee80211_class; | 
|  | rdev->wiphy.dev.platform_data = rdev; | 
|  | device_enable_async_suspend(&rdev->wiphy.dev); | 
|  |  | 
|  | INIT_WORK(&rdev->destroy_work, cfg80211_destroy_iface_wk); | 
|  | INIT_WORK(&rdev->sched_scan_stop_wk, cfg80211_sched_scan_stop_wk); | 
|  | INIT_WORK(&rdev->sched_scan_res_wk, cfg80211_sched_scan_results_wk); | 
|  | INIT_WORK(&rdev->propagate_radar_detect_wk, | 
|  | cfg80211_propagate_radar_detect_wk); | 
|  | INIT_WORK(&rdev->propagate_cac_done_wk, cfg80211_propagate_cac_done_wk); | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_DEFAULT_PS | 
|  | rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; | 
|  | #endif | 
|  |  | 
|  | wiphy_net_set(&rdev->wiphy, &init_net); | 
|  |  | 
|  | rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block; | 
|  | rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev), | 
|  | &rdev->wiphy.dev, RFKILL_TYPE_WLAN, | 
|  | &rdev->rfkill_ops, rdev); | 
|  |  | 
|  | if (!rdev->rfkill) { | 
|  | wiphy_free(&rdev->wiphy); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | INIT_WORK(&rdev->rfkill_block, cfg80211_rfkill_block_work); | 
|  | INIT_WORK(&rdev->conn_work, cfg80211_conn_work); | 
|  | INIT_WORK(&rdev->event_work, cfg80211_event_work); | 
|  |  | 
|  | init_waitqueue_head(&rdev->dev_wait); | 
|  |  | 
|  | /* | 
|  | * Initialize wiphy parameters to IEEE 802.11 MIB default values. | 
|  | * Fragmentation and RTS threshold are disabled by default with the | 
|  | * special -1 value. | 
|  | */ | 
|  | rdev->wiphy.retry_short = 7; | 
|  | rdev->wiphy.retry_long = 4; | 
|  | rdev->wiphy.frag_threshold = (u32) -1; | 
|  | rdev->wiphy.rts_threshold = (u32) -1; | 
|  | rdev->wiphy.coverage_class = 0; | 
|  |  | 
|  | rdev->wiphy.max_num_csa_counters = 1; | 
|  |  | 
|  | rdev->wiphy.max_sched_scan_plans = 1; | 
|  | rdev->wiphy.max_sched_scan_plan_interval = U32_MAX; | 
|  |  | 
|  | return &rdev->wiphy; | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_new_nm); | 
|  |  | 
|  | static int wiphy_verify_combinations(struct wiphy *wiphy) | 
|  | { | 
|  | const struct ieee80211_iface_combination *c; | 
|  | int i, j; | 
|  |  | 
|  | for (i = 0; i < wiphy->n_iface_combinations; i++) { | 
|  | u32 cnt = 0; | 
|  | u16 all_iftypes = 0; | 
|  |  | 
|  | c = &wiphy->iface_combinations[i]; | 
|  |  | 
|  | /* | 
|  | * Combinations with just one interface aren't real, | 
|  | * however we make an exception for DFS. | 
|  | */ | 
|  | if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Need at least one channel */ | 
|  | if (WARN_ON(!c->num_different_channels)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Put a sane limit on maximum number of different | 
|  | * channels to simplify channel accounting code. | 
|  | */ | 
|  | if (WARN_ON(c->num_different_channels > | 
|  | CFG80211_MAX_NUM_DIFFERENT_CHANNELS)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* DFS only works on one channel. */ | 
|  | if (WARN_ON(c->radar_detect_widths && | 
|  | (c->num_different_channels > 1))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(!c->n_limits)) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (j = 0; j < c->n_limits; j++) { | 
|  | u16 types = c->limits[j].types; | 
|  |  | 
|  | /* interface types shouldn't overlap */ | 
|  | if (WARN_ON(types & all_iftypes)) | 
|  | return -EINVAL; | 
|  | all_iftypes |= types; | 
|  |  | 
|  | if (WARN_ON(!c->limits[j].max)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Shouldn't list software iftypes in combinations! */ | 
|  | if (WARN_ON(wiphy->software_iftypes & types)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Only a single P2P_DEVICE can be allowed */ | 
|  | if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) && | 
|  | c->limits[j].max > 1)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Only a single NAN can be allowed */ | 
|  | if (WARN_ON(types & BIT(NL80211_IFTYPE_NAN) && | 
|  | c->limits[j].max > 1)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * This isn't well-defined right now. If you have an | 
|  | * IBSS interface, then its beacon interval may change | 
|  | * by joining other networks, and nothing prevents it | 
|  | * from doing that. | 
|  | * So technically we probably shouldn't even allow AP | 
|  | * and IBSS in the same interface, but it seems that | 
|  | * some drivers support that, possibly only with fixed | 
|  | * beacon intervals for IBSS. | 
|  | */ | 
|  | if (WARN_ON(types & BIT(NL80211_IFTYPE_ADHOC) && | 
|  | c->beacon_int_min_gcd)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | cnt += c->limits[j].max; | 
|  | /* | 
|  | * Don't advertise an unsupported type | 
|  | * in a combination. | 
|  | */ | 
|  | if (WARN_ON((wiphy->interface_modes & types) != types)) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifndef CONFIG_WIRELESS_WDS | 
|  | if (WARN_ON(all_iftypes & BIT(NL80211_IFTYPE_WDS))) | 
|  | return -EINVAL; | 
|  | #endif | 
|  |  | 
|  | /* You can't even choose that many! */ | 
|  | if (WARN_ON(cnt < c->max_interfaces)) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wiphy_register(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | int res; | 
|  | enum nl80211_band band; | 
|  | struct ieee80211_supported_band *sband; | 
|  | bool have_band = false; | 
|  | int i; | 
|  | u16 ifmodes = wiphy->interface_modes; | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | if (WARN_ON(wiphy->wowlan && | 
|  | (wiphy->wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) && | 
|  | !(wiphy->wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY))) | 
|  | return -EINVAL; | 
|  | if (WARN_ON(wiphy->wowlan && | 
|  | !wiphy->wowlan->flags && !wiphy->wowlan->n_patterns && | 
|  | !wiphy->wowlan->tcp)) | 
|  | return -EINVAL; | 
|  | #endif | 
|  | if (WARN_ON((wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) && | 
|  | (!rdev->ops->tdls_channel_switch || | 
|  | !rdev->ops->tdls_cancel_channel_switch))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON((wiphy->interface_modes & BIT(NL80211_IFTYPE_NAN)) && | 
|  | (!rdev->ops->start_nan || !rdev->ops->stop_nan || | 
|  | !rdev->ops->add_nan_func || !rdev->ops->del_nan_func || | 
|  | !(wiphy->nan_supported_bands & BIT(NL80211_BAND_2GHZ))))) | 
|  | return -EINVAL; | 
|  |  | 
|  | #ifndef CONFIG_WIRELESS_WDS | 
|  | if (WARN_ON(wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))) | 
|  | return -EINVAL; | 
|  | #endif | 
|  |  | 
|  | if (WARN_ON(wiphy->pmsr_capa && !wiphy->pmsr_capa->ftm.supported)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (wiphy->pmsr_capa && wiphy->pmsr_capa->ftm.supported) { | 
|  | if (WARN_ON(!wiphy->pmsr_capa->ftm.asap && | 
|  | !wiphy->pmsr_capa->ftm.non_asap)) | 
|  | return -EINVAL; | 
|  | if (WARN_ON(!wiphy->pmsr_capa->ftm.preambles || | 
|  | !wiphy->pmsr_capa->ftm.bandwidths)) | 
|  | return -EINVAL; | 
|  | if (WARN_ON(wiphy->pmsr_capa->ftm.preambles & | 
|  | ~(BIT(NL80211_PREAMBLE_LEGACY) | | 
|  | BIT(NL80211_PREAMBLE_HT) | | 
|  | BIT(NL80211_PREAMBLE_VHT) | | 
|  | BIT(NL80211_PREAMBLE_DMG)))) | 
|  | return -EINVAL; | 
|  | if (WARN_ON(wiphy->pmsr_capa->ftm.bandwidths & | 
|  | ~(BIT(NL80211_CHAN_WIDTH_20_NOHT) | | 
|  | BIT(NL80211_CHAN_WIDTH_20) | | 
|  | BIT(NL80211_CHAN_WIDTH_40) | | 
|  | BIT(NL80211_CHAN_WIDTH_80) | | 
|  | BIT(NL80211_CHAN_WIDTH_80P80) | | 
|  | BIT(NL80211_CHAN_WIDTH_160) | | 
|  | BIT(NL80211_CHAN_WIDTH_5) | | 
|  | BIT(NL80211_CHAN_WIDTH_10)))) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * if a wiphy has unsupported modes for regulatory channel enforcement, | 
|  | * opt-out of enforcement checking | 
|  | */ | 
|  | if (wiphy->interface_modes & ~(BIT(NL80211_IFTYPE_STATION) | | 
|  | BIT(NL80211_IFTYPE_P2P_CLIENT) | | 
|  | BIT(NL80211_IFTYPE_AP) | | 
|  | BIT(NL80211_IFTYPE_P2P_GO) | | 
|  | BIT(NL80211_IFTYPE_ADHOC) | | 
|  | BIT(NL80211_IFTYPE_P2P_DEVICE) | | 
|  | BIT(NL80211_IFTYPE_NAN) | | 
|  | BIT(NL80211_IFTYPE_AP_VLAN) | | 
|  | BIT(NL80211_IFTYPE_MONITOR))) | 
|  | wiphy->regulatory_flags |= REGULATORY_IGNORE_STALE_KICKOFF; | 
|  |  | 
|  | if (WARN_ON((wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) && | 
|  | (wiphy->regulatory_flags & | 
|  | (REGULATORY_CUSTOM_REG | | 
|  | REGULATORY_STRICT_REG | | 
|  | REGULATORY_COUNTRY_IE_FOLLOW_POWER | | 
|  | REGULATORY_COUNTRY_IE_IGNORE)))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(wiphy->coalesce && | 
|  | (!wiphy->coalesce->n_rules || | 
|  | !wiphy->coalesce->n_patterns) && | 
|  | (!wiphy->coalesce->pattern_min_len || | 
|  | wiphy->coalesce->pattern_min_len > | 
|  | wiphy->coalesce->pattern_max_len))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(wiphy->ap_sme_capa && | 
|  | !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(wiphy->addresses && !wiphy->n_addresses)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(wiphy->addresses && | 
|  | !is_zero_ether_addr(wiphy->perm_addr) && | 
|  | memcmp(wiphy->perm_addr, wiphy->addresses[0].addr, | 
|  | ETH_ALEN))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(wiphy->max_acl_mac_addrs && | 
|  | (!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) || | 
|  | !rdev->ops->set_mac_acl))) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* assure only valid behaviours are flagged by driver | 
|  | * hence subtract 2 as bit 0 is invalid. | 
|  | */ | 
|  | if (WARN_ON(wiphy->bss_select_support && | 
|  | (wiphy->bss_select_support & ~(BIT(__NL80211_BSS_SELECT_ATTR_AFTER_LAST) - 2)))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(wiphy_ext_feature_isset(&rdev->wiphy, | 
|  | NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X) && | 
|  | (!rdev->ops->set_pmk || !rdev->ops->del_pmk))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_FW_ROAM) && | 
|  | rdev->ops->update_connect_params)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (wiphy->addresses) | 
|  | memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN); | 
|  |  | 
|  | /* sanity check ifmodes */ | 
|  | WARN_ON(!ifmodes); | 
|  | ifmodes &= ((1 << NUM_NL80211_IFTYPES) - 1) & ~1; | 
|  | if (WARN_ON(ifmodes != wiphy->interface_modes)) | 
|  | wiphy->interface_modes = ifmodes; | 
|  |  | 
|  | res = wiphy_verify_combinations(wiphy); | 
|  | if (res) | 
|  | return res; | 
|  |  | 
|  | /* sanity check supported bands/channels */ | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | u16 types = 0; | 
|  |  | 
|  | sband = wiphy->bands[band]; | 
|  | if (!sband) | 
|  | continue; | 
|  |  | 
|  | sband->band = band; | 
|  | if (WARN_ON(!sband->n_channels)) | 
|  | return -EINVAL; | 
|  | /* | 
|  | * on 60GHz band, there are no legacy rates, so | 
|  | * n_bitrates is 0 | 
|  | */ | 
|  | if (WARN_ON(band != NL80211_BAND_60GHZ && | 
|  | !sband->n_bitrates)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Since cfg80211_disable_40mhz_24ghz is global, we can | 
|  | * modify the sband's ht data even if the driver uses a | 
|  | * global structure for that. | 
|  | */ | 
|  | if (cfg80211_disable_40mhz_24ghz && | 
|  | band == NL80211_BAND_2GHZ && | 
|  | sband->ht_cap.ht_supported) { | 
|  | sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Since we use a u32 for rate bitmaps in | 
|  | * ieee80211_get_response_rate, we cannot | 
|  | * have more than 32 legacy rates. | 
|  | */ | 
|  | if (WARN_ON(sband->n_bitrates > 32)) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | sband->channels[i].orig_flags = | 
|  | sband->channels[i].flags; | 
|  | sband->channels[i].orig_mag = INT_MAX; | 
|  | sband->channels[i].orig_mpwr = | 
|  | sband->channels[i].max_power; | 
|  | sband->channels[i].band = band; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < sband->n_iftype_data; i++) { | 
|  | const struct ieee80211_sband_iftype_data *iftd; | 
|  |  | 
|  | iftd = &sband->iftype_data[i]; | 
|  |  | 
|  | if (WARN_ON(!iftd->types_mask)) | 
|  | return -EINVAL; | 
|  | if (WARN_ON(types & iftd->types_mask)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* at least one piece of information must be present */ | 
|  | if (WARN_ON(!iftd->he_cap.has_he)) | 
|  | return -EINVAL; | 
|  |  | 
|  | types |= iftd->types_mask; | 
|  | } | 
|  |  | 
|  | have_band = true; | 
|  | } | 
|  |  | 
|  | if (!have_band) { | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) { | 
|  | /* | 
|  | * Validate we have a policy (can be explicitly set to | 
|  | * VENDOR_CMD_RAW_DATA which is non-NULL) and also that | 
|  | * we have at least one of doit/dumpit. | 
|  | */ | 
|  | if (WARN_ON(!rdev->wiphy.vendor_commands[i].policy)) | 
|  | return -EINVAL; | 
|  | if (WARN_ON(!rdev->wiphy.vendor_commands[i].doit && | 
|  | !rdev->wiphy.vendor_commands[i].dumpit)) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns && | 
|  | (!rdev->wiphy.wowlan->pattern_min_len || | 
|  | rdev->wiphy.wowlan->pattern_min_len > | 
|  | rdev->wiphy.wowlan->pattern_max_len))) | 
|  | return -EINVAL; | 
|  | #endif | 
|  |  | 
|  | /* check and set up bitrates */ | 
|  | ieee80211_set_bitrate_flags(wiphy); | 
|  |  | 
|  | rdev->wiphy.features |= NL80211_FEATURE_SCAN_FLUSH; | 
|  |  | 
|  | rtnl_lock(); | 
|  | res = device_add(&rdev->wiphy.dev); | 
|  | if (res) { | 
|  | rtnl_unlock(); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* set up regulatory info */ | 
|  | wiphy_regulatory_register(wiphy); | 
|  |  | 
|  | list_add_rcu(&rdev->list, &cfg80211_rdev_list); | 
|  | cfg80211_rdev_list_generation++; | 
|  |  | 
|  | /* add to debugfs */ | 
|  | rdev->wiphy.debugfsdir = debugfs_create_dir(wiphy_name(&rdev->wiphy), | 
|  | ieee80211_debugfs_dir); | 
|  |  | 
|  | cfg80211_debugfs_rdev_add(rdev); | 
|  | nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY); | 
|  |  | 
|  | if (wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) { | 
|  | struct regulatory_request request; | 
|  |  | 
|  | request.wiphy_idx = get_wiphy_idx(wiphy); | 
|  | request.initiator = NL80211_REGDOM_SET_BY_DRIVER; | 
|  | request.alpha2[0] = '9'; | 
|  | request.alpha2[1] = '9'; | 
|  |  | 
|  | nl80211_send_reg_change_event(&request); | 
|  | } | 
|  |  | 
|  | /* Check that nobody globally advertises any capabilities they do not | 
|  | * advertise on all possible interface types. | 
|  | */ | 
|  | if (wiphy->extended_capabilities_len && | 
|  | wiphy->num_iftype_ext_capab && | 
|  | wiphy->iftype_ext_capab) { | 
|  | u8 supported_on_all, j; | 
|  | const struct wiphy_iftype_ext_capab *capab; | 
|  |  | 
|  | capab = wiphy->iftype_ext_capab; | 
|  | for (j = 0; j < wiphy->extended_capabilities_len; j++) { | 
|  | if (capab[0].extended_capabilities_len > j) | 
|  | supported_on_all = | 
|  | capab[0].extended_capabilities[j]; | 
|  | else | 
|  | supported_on_all = 0x00; | 
|  | for (i = 1; i < wiphy->num_iftype_ext_capab; i++) { | 
|  | if (j >= capab[i].extended_capabilities_len) { | 
|  | supported_on_all = 0x00; | 
|  | break; | 
|  | } | 
|  | supported_on_all &= | 
|  | capab[i].extended_capabilities[j]; | 
|  | } | 
|  | if (WARN_ON(wiphy->extended_capabilities[j] & | 
|  | ~supported_on_all)) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | rdev->wiphy.registered = true; | 
|  | rtnl_unlock(); | 
|  |  | 
|  | res = rfkill_register(rdev->rfkill); | 
|  | if (res) { | 
|  | rfkill_destroy(rdev->rfkill); | 
|  | rdev->rfkill = NULL; | 
|  | wiphy_unregister(&rdev->wiphy); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_register); | 
|  |  | 
|  | void wiphy_rfkill_start_polling(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | if (!rdev->ops->rfkill_poll) | 
|  | return; | 
|  | rdev->rfkill_ops.poll = cfg80211_rfkill_poll; | 
|  | rfkill_resume_polling(rdev->rfkill); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_rfkill_start_polling); | 
|  |  | 
|  | void wiphy_rfkill_stop_polling(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | rfkill_pause_polling(rdev->rfkill); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_rfkill_stop_polling); | 
|  |  | 
|  | void wiphy_unregister(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | wait_event(rdev->dev_wait, ({ | 
|  | int __count; | 
|  | rtnl_lock(); | 
|  | __count = rdev->opencount; | 
|  | rtnl_unlock(); | 
|  | __count == 0; })); | 
|  |  | 
|  | if (rdev->rfkill) | 
|  | rfkill_unregister(rdev->rfkill); | 
|  |  | 
|  | rtnl_lock(); | 
|  | nl80211_notify_wiphy(rdev, NL80211_CMD_DEL_WIPHY); | 
|  | rdev->wiphy.registered = false; | 
|  |  | 
|  | WARN_ON(!list_empty(&rdev->wiphy.wdev_list)); | 
|  |  | 
|  | /* | 
|  | * First remove the hardware from everywhere, this makes | 
|  | * it impossible to find from userspace. | 
|  | */ | 
|  | debugfs_remove_recursive(rdev->wiphy.debugfsdir); | 
|  | list_del_rcu(&rdev->list); | 
|  | synchronize_rcu(); | 
|  |  | 
|  | /* | 
|  | * If this device got a regulatory hint tell core its | 
|  | * free to listen now to a new shiny device regulatory hint | 
|  | */ | 
|  | wiphy_regulatory_deregister(wiphy); | 
|  |  | 
|  | cfg80211_rdev_list_generation++; | 
|  | device_del(&rdev->wiphy.dev); | 
|  |  | 
|  | rtnl_unlock(); | 
|  |  | 
|  | flush_work(&rdev->scan_done_wk); | 
|  | cancel_work_sync(&rdev->conn_work); | 
|  | flush_work(&rdev->event_work); | 
|  | cancel_delayed_work_sync(&rdev->dfs_update_channels_wk); | 
|  | flush_work(&rdev->destroy_work); | 
|  | flush_work(&rdev->sched_scan_stop_wk); | 
|  | flush_work(&rdev->mlme_unreg_wk); | 
|  | flush_work(&rdev->propagate_radar_detect_wk); | 
|  | flush_work(&rdev->propagate_cac_done_wk); | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | if (rdev->wiphy.wowlan_config && rdev->ops->set_wakeup) | 
|  | rdev_set_wakeup(rdev, false); | 
|  | #endif | 
|  | cfg80211_rdev_free_wowlan(rdev); | 
|  | cfg80211_rdev_free_coalesce(rdev); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_unregister); | 
|  |  | 
|  | void cfg80211_dev_free(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct cfg80211_internal_bss *scan, *tmp; | 
|  | struct cfg80211_beacon_registration *reg, *treg; | 
|  | rfkill_destroy(rdev->rfkill); | 
|  | list_for_each_entry_safe(reg, treg, &rdev->beacon_registrations, list) { | 
|  | list_del(®->list); | 
|  | kfree(reg); | 
|  | } | 
|  | list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list) | 
|  | cfg80211_put_bss(&rdev->wiphy, &scan->pub); | 
|  | kfree(rdev); | 
|  | } | 
|  |  | 
|  | void wiphy_free(struct wiphy *wiphy) | 
|  | { | 
|  | put_device(&wiphy->dev); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_free); | 
|  |  | 
|  | void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | if (rfkill_set_hw_state(rdev->rfkill, blocked)) | 
|  | schedule_work(&rdev->rfkill_block); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_rfkill_set_hw_state); | 
|  |  | 
|  | void cfg80211_cqm_config_free(struct wireless_dev *wdev) | 
|  | { | 
|  | kfree(wdev->cqm_config); | 
|  | wdev->cqm_config = NULL; | 
|  | } | 
|  |  | 
|  | static void __cfg80211_unregister_wdev(struct wireless_dev *wdev, bool sync) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | flush_work(&wdev->pmsr_free_wk); | 
|  |  | 
|  | nl80211_notify_iface(rdev, wdev, NL80211_CMD_DEL_INTERFACE); | 
|  |  | 
|  | list_del_rcu(&wdev->list); | 
|  | if (sync) | 
|  | synchronize_rcu(); | 
|  | rdev->devlist_generation++; | 
|  |  | 
|  | cfg80211_mlme_purge_registrations(wdev); | 
|  |  | 
|  | switch (wdev->iftype) { | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | cfg80211_stop_p2p_device(rdev, wdev); | 
|  | break; | 
|  | case NL80211_IFTYPE_NAN: | 
|  | cfg80211_stop_nan(rdev, wdev); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | kzfree(wdev->wext.keys); | 
|  | wdev->wext.keys = NULL; | 
|  | #endif | 
|  | /* only initialized if we have a netdev */ | 
|  | if (wdev->netdev) | 
|  | flush_work(&wdev->disconnect_wk); | 
|  |  | 
|  | cfg80211_cqm_config_free(wdev); | 
|  | } | 
|  |  | 
|  | void cfg80211_unregister_wdev(struct wireless_dev *wdev) | 
|  | { | 
|  | if (WARN_ON(wdev->netdev)) | 
|  | return; | 
|  |  | 
|  | __cfg80211_unregister_wdev(wdev, true); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_unregister_wdev); | 
|  |  | 
|  | static const struct device_type wiphy_type = { | 
|  | .name	= "wlan", | 
|  | }; | 
|  |  | 
|  | void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev, | 
|  | enum nl80211_iftype iftype, int num) | 
|  | { | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | rdev->num_running_ifaces += num; | 
|  | if (iftype == NL80211_IFTYPE_MONITOR) | 
|  | rdev->num_running_monitor_ifaces += num; | 
|  | } | 
|  |  | 
|  | void __cfg80211_leave(struct cfg80211_registered_device *rdev, | 
|  | struct wireless_dev *wdev) | 
|  | { | 
|  | struct net_device *dev = wdev->netdev; | 
|  | struct cfg80211_sched_scan_request *pos, *tmp; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  | ASSERT_WDEV_LOCK(wdev); | 
|  |  | 
|  | cfg80211_pmsr_wdev_down(wdev); | 
|  |  | 
|  | switch (wdev->iftype) { | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | __cfg80211_leave_ibss(rdev, dev, true); | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | list_for_each_entry_safe(pos, tmp, &rdev->sched_scan_req_list, | 
|  | list) { | 
|  | if (dev == pos->dev) | 
|  | cfg80211_stop_sched_scan_req(rdev, pos, false); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | kfree(wdev->wext.ie); | 
|  | wdev->wext.ie = NULL; | 
|  | wdev->wext.ie_len = 0; | 
|  | wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; | 
|  | #endif | 
|  | cfg80211_disconnect(rdev, dev, | 
|  | WLAN_REASON_DEAUTH_LEAVING, true); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | __cfg80211_leave_mesh(rdev, dev); | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | __cfg80211_stop_ap(rdev, dev, true); | 
|  | break; | 
|  | case NL80211_IFTYPE_OCB: | 
|  | __cfg80211_leave_ocb(rdev, dev); | 
|  | break; | 
|  | case NL80211_IFTYPE_WDS: | 
|  | /* must be handled by mac80211/driver, has no APIs */ | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | case NL80211_IFTYPE_NAN: | 
|  | /* cannot happen, has no netdev */ | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* nothing to do */ | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NUM_NL80211_IFTYPES: | 
|  | /* invalid */ | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void cfg80211_leave(struct cfg80211_registered_device *rdev, | 
|  | struct wireless_dev *wdev) | 
|  | { | 
|  | wdev_lock(wdev); | 
|  | __cfg80211_leave(rdev, wdev); | 
|  | wdev_unlock(wdev); | 
|  | } | 
|  |  | 
|  | void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_event *ev; | 
|  | unsigned long flags; | 
|  |  | 
|  | trace_cfg80211_stop_iface(wiphy, wdev); | 
|  |  | 
|  | ev = kzalloc(sizeof(*ev), gfp); | 
|  | if (!ev) | 
|  | return; | 
|  |  | 
|  | ev->type = EVENT_STOPPED; | 
|  |  | 
|  | spin_lock_irqsave(&wdev->event_lock, flags); | 
|  | list_add_tail(&ev->list, &wdev->event_list); | 
|  | spin_unlock_irqrestore(&wdev->event_lock, flags); | 
|  | queue_work(cfg80211_wq, &rdev->event_work); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_stop_iface); | 
|  |  | 
|  | void cfg80211_init_wdev(struct wireless_dev *wdev) | 
|  | { | 
|  | mutex_init(&wdev->mtx); | 
|  | INIT_LIST_HEAD(&wdev->event_list); | 
|  | spin_lock_init(&wdev->event_lock); | 
|  | INIT_LIST_HEAD(&wdev->mgmt_registrations); | 
|  | spin_lock_init(&wdev->mgmt_registrations_lock); | 
|  | INIT_LIST_HEAD(&wdev->pmsr_list); | 
|  | spin_lock_init(&wdev->pmsr_lock); | 
|  | INIT_WORK(&wdev->pmsr_free_wk, cfg80211_pmsr_free_wk); | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | wdev->wext.default_key = -1; | 
|  | wdev->wext.default_mgmt_key = -1; | 
|  | wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; | 
|  | #endif | 
|  |  | 
|  | if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT) | 
|  | wdev->ps = true; | 
|  | else | 
|  | wdev->ps = false; | 
|  | /* allow mac80211 to determine the timeout */ | 
|  | wdev->ps_timeout = -1; | 
|  |  | 
|  | if ((wdev->iftype == NL80211_IFTYPE_STATION || | 
|  | wdev->iftype == NL80211_IFTYPE_P2P_CLIENT || | 
|  | wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr) | 
|  | wdev->netdev->priv_flags |= IFF_DONT_BRIDGE; | 
|  |  | 
|  | INIT_WORK(&wdev->disconnect_wk, cfg80211_autodisconnect_wk); | 
|  | } | 
|  |  | 
|  | void cfg80211_register_wdev(struct cfg80211_registered_device *rdev, | 
|  | struct wireless_dev *wdev) | 
|  | { | 
|  | /* | 
|  | * We get here also when the interface changes network namespaces, | 
|  | * as it's registered into the new one, but we don't want it to | 
|  | * change ID in that case. Checking if the ID is already assigned | 
|  | * works, because 0 isn't considered a valid ID and the memory is | 
|  | * 0-initialized. | 
|  | */ | 
|  | if (!wdev->identifier) | 
|  | wdev->identifier = ++rdev->wdev_id; | 
|  | list_add_rcu(&wdev->list, &rdev->wiphy.wdev_list); | 
|  | rdev->devlist_generation++; | 
|  |  | 
|  | nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE); | 
|  | } | 
|  |  | 
|  | static int cfg80211_netdev_notifier_call(struct notifier_block *nb, | 
|  | unsigned long state, void *ptr) | 
|  | { | 
|  | struct net_device *dev = netdev_notifier_info_to_dev(ptr); | 
|  | struct wireless_dev *wdev = dev->ieee80211_ptr; | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct cfg80211_sched_scan_request *pos, *tmp; | 
|  |  | 
|  | if (!wdev) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | rdev = wiphy_to_rdev(wdev->wiphy); | 
|  |  | 
|  | WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED); | 
|  |  | 
|  | switch (state) { | 
|  | case NETDEV_POST_INIT: | 
|  | SET_NETDEV_DEVTYPE(dev, &wiphy_type); | 
|  | wdev->netdev = dev; | 
|  | /* can only change netns with wiphy */ | 
|  | dev->features |= NETIF_F_NETNS_LOCAL; | 
|  |  | 
|  | cfg80211_init_wdev(wdev); | 
|  | break; | 
|  | case NETDEV_REGISTER: | 
|  | /* | 
|  | * NB: cannot take rdev->mtx here because this may be | 
|  | * called within code protected by it when interfaces | 
|  | * are added with nl80211. | 
|  | */ | 
|  | if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj, | 
|  | "phy80211")) { | 
|  | pr_err("failed to add phy80211 symlink to netdev!\n"); | 
|  | } | 
|  |  | 
|  | cfg80211_register_wdev(rdev, wdev); | 
|  | break; | 
|  | case NETDEV_GOING_DOWN: | 
|  | cfg80211_leave(rdev, wdev); | 
|  | break; | 
|  | case NETDEV_DOWN: | 
|  | cfg80211_update_iface_num(rdev, wdev->iftype, -1); | 
|  | if (rdev->scan_req && rdev->scan_req->wdev == wdev) { | 
|  | if (WARN_ON(!rdev->scan_req->notified)) | 
|  | rdev->scan_req->info.aborted = true; | 
|  | ___cfg80211_scan_done(rdev, false); | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(pos, tmp, | 
|  | &rdev->sched_scan_req_list, list) { | 
|  | if (WARN_ON(pos->dev == wdev->netdev)) | 
|  | cfg80211_stop_sched_scan_req(rdev, pos, false); | 
|  | } | 
|  |  | 
|  | rdev->opencount--; | 
|  | wake_up(&rdev->dev_wait); | 
|  | break; | 
|  | case NETDEV_UP: | 
|  | cfg80211_update_iface_num(rdev, wdev->iftype, 1); | 
|  | wdev_lock(wdev); | 
|  | switch (wdev->iftype) { | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | cfg80211_ibss_wext_join(rdev, wdev); | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | cfg80211_mgd_wext_connect(rdev, wdev); | 
|  | break; | 
|  | #endif | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | { | 
|  | /* backward compat code... */ | 
|  | struct mesh_setup setup; | 
|  | memcpy(&setup, &default_mesh_setup, | 
|  | sizeof(setup)); | 
|  | /* back compat only needed for mesh_id */ | 
|  | setup.mesh_id = wdev->ssid; | 
|  | setup.mesh_id_len = wdev->mesh_id_up_len; | 
|  | if (wdev->mesh_id_up_len) | 
|  | __cfg80211_join_mesh(rdev, dev, | 
|  | &setup, | 
|  | &default_mesh_config); | 
|  | break; | 
|  | } | 
|  | #endif | 
|  | default: | 
|  | break; | 
|  | } | 
|  | wdev_unlock(wdev); | 
|  | rdev->opencount++; | 
|  |  | 
|  | /* | 
|  | * Configure power management to the driver here so that its | 
|  | * correctly set also after interface type changes etc. | 
|  | */ | 
|  | if ((wdev->iftype == NL80211_IFTYPE_STATION || | 
|  | wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) && | 
|  | rdev->ops->set_power_mgmt && | 
|  | rdev_set_power_mgmt(rdev, dev, wdev->ps, | 
|  | wdev->ps_timeout)) { | 
|  | /* assume this means it's off */ | 
|  | wdev->ps = false; | 
|  | } | 
|  | break; | 
|  | case NETDEV_UNREGISTER: | 
|  | /* | 
|  | * It is possible to get NETDEV_UNREGISTER | 
|  | * multiple times. To detect that, check | 
|  | * that the interface is still on the list | 
|  | * of registered interfaces, and only then | 
|  | * remove and clean it up. | 
|  | */ | 
|  | if (!list_empty(&wdev->list)) { | 
|  | __cfg80211_unregister_wdev(wdev, false); | 
|  | sysfs_remove_link(&dev->dev.kobj, "phy80211"); | 
|  | } | 
|  | /* | 
|  | * synchronise (so that we won't find this netdev | 
|  | * from other code any more) and then clear the list | 
|  | * head so that the above code can safely check for | 
|  | * !list_empty() to avoid double-cleanup. | 
|  | */ | 
|  | synchronize_rcu(); | 
|  | INIT_LIST_HEAD(&wdev->list); | 
|  | /* | 
|  | * Ensure that all events have been processed and | 
|  | * freed. | 
|  | */ | 
|  | cfg80211_process_wdev_events(wdev); | 
|  |  | 
|  | if (WARN_ON(wdev->current_bss)) { | 
|  | cfg80211_unhold_bss(wdev->current_bss); | 
|  | cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); | 
|  | wdev->current_bss = NULL; | 
|  | } | 
|  | break; | 
|  | case NETDEV_PRE_UP: | 
|  | if (!cfg80211_iftype_allowed(wdev->wiphy, wdev->iftype, | 
|  | wdev->use_4addr, 0)) | 
|  | return notifier_from_errno(-EOPNOTSUPP); | 
|  |  | 
|  | if (rfkill_blocked(rdev->rfkill)) | 
|  | return notifier_from_errno(-ERFKILL); | 
|  | break; | 
|  | default: | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | wireless_nlevent_flush(); | 
|  |  | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | static struct notifier_block cfg80211_netdev_notifier = { | 
|  | .notifier_call = cfg80211_netdev_notifier_call, | 
|  | }; | 
|  |  | 
|  | static void __net_exit cfg80211_pernet_exit(struct net *net) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rtnl_lock(); | 
|  | list_for_each_entry(rdev, &cfg80211_rdev_list, list) { | 
|  | if (net_eq(wiphy_net(&rdev->wiphy), net)) | 
|  | WARN_ON(cfg80211_switch_netns(rdev, &init_net)); | 
|  | } | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static struct pernet_operations cfg80211_pernet_ops = { | 
|  | .exit = cfg80211_pernet_exit, | 
|  | }; | 
|  |  | 
|  | static int __init cfg80211_init(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = register_pernet_device(&cfg80211_pernet_ops); | 
|  | if (err) | 
|  | goto out_fail_pernet; | 
|  |  | 
|  | err = wiphy_sysfs_init(); | 
|  | if (err) | 
|  | goto out_fail_sysfs; | 
|  |  | 
|  | err = register_netdevice_notifier(&cfg80211_netdev_notifier); | 
|  | if (err) | 
|  | goto out_fail_notifier; | 
|  |  | 
|  | err = nl80211_init(); | 
|  | if (err) | 
|  | goto out_fail_nl80211; | 
|  |  | 
|  | ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL); | 
|  |  | 
|  | err = regulatory_init(); | 
|  | if (err) | 
|  | goto out_fail_reg; | 
|  |  | 
|  | cfg80211_wq = alloc_ordered_workqueue("cfg80211", WQ_MEM_RECLAIM); | 
|  | if (!cfg80211_wq) { | 
|  | err = -ENOMEM; | 
|  | goto out_fail_wq; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_fail_wq: | 
|  | regulatory_exit(); | 
|  | out_fail_reg: | 
|  | debugfs_remove(ieee80211_debugfs_dir); | 
|  | nl80211_exit(); | 
|  | out_fail_nl80211: | 
|  | unregister_netdevice_notifier(&cfg80211_netdev_notifier); | 
|  | out_fail_notifier: | 
|  | wiphy_sysfs_exit(); | 
|  | out_fail_sysfs: | 
|  | unregister_pernet_device(&cfg80211_pernet_ops); | 
|  | out_fail_pernet: | 
|  | return err; | 
|  | } | 
|  | fs_initcall(cfg80211_init); | 
|  |  | 
|  | static void __exit cfg80211_exit(void) | 
|  | { | 
|  | debugfs_remove(ieee80211_debugfs_dir); | 
|  | nl80211_exit(); | 
|  | unregister_netdevice_notifier(&cfg80211_netdev_notifier); | 
|  | wiphy_sysfs_exit(); | 
|  | regulatory_exit(); | 
|  | unregister_pernet_device(&cfg80211_pernet_ops); | 
|  | destroy_workqueue(cfg80211_wq); | 
|  | } | 
|  | module_exit(cfg80211_exit); |