|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * ACPI device specific properties support. | 
|  | * | 
|  | * Copyright (C) 2014, Intel Corporation | 
|  | * All rights reserved. | 
|  | * | 
|  | * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> | 
|  | *          Darren Hart <dvhart@linux.intel.com> | 
|  | *          Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/export.h> | 
|  |  | 
|  | #include "internal.h" | 
|  |  | 
|  | static int acpi_data_get_property_array(const struct acpi_device_data *data, | 
|  | const char *name, | 
|  | acpi_object_type type, | 
|  | const union acpi_object **obj); | 
|  |  | 
|  | /* | 
|  | * The GUIDs here are made equivalent to each other in order to avoid extra | 
|  | * complexity in the properties handling code, with the caveat that the | 
|  | * kernel will accept certain combinations of GUID and properties that are | 
|  | * not defined without a warning. For instance if any of the properties | 
|  | * from different GUID appear in a property list of another, it will be | 
|  | * accepted by the kernel. Firmware validation tools should catch these. | 
|  | */ | 
|  | static const guid_t prp_guids[] = { | 
|  | /* ACPI _DSD device properties GUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */ | 
|  | GUID_INIT(0xdaffd814, 0x6eba, 0x4d8c, | 
|  | 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01), | 
|  | /* Hotplug in D3 GUID: 6211e2c0-58a3-4af3-90e1-927a4e0c55a4 */ | 
|  | GUID_INIT(0x6211e2c0, 0x58a3, 0x4af3, | 
|  | 0x90, 0xe1, 0x92, 0x7a, 0x4e, 0x0c, 0x55, 0xa4), | 
|  | /* External facing port GUID: efcc06cc-73ac-4bc3-bff0-76143807c389 */ | 
|  | GUID_INIT(0xefcc06cc, 0x73ac, 0x4bc3, | 
|  | 0xbf, 0xf0, 0x76, 0x14, 0x38, 0x07, 0xc3, 0x89), | 
|  | /* Thunderbolt GUID for IMR_VALID: c44d002f-69f9-4e7d-a904-a7baabdf43f7 */ | 
|  | GUID_INIT(0xc44d002f, 0x69f9, 0x4e7d, | 
|  | 0xa9, 0x04, 0xa7, 0xba, 0xab, 0xdf, 0x43, 0xf7), | 
|  | /* Thunderbolt GUID for WAKE_SUPPORTED: 6c501103-c189-4296-ba72-9bf5a26ebe5d */ | 
|  | GUID_INIT(0x6c501103, 0xc189, 0x4296, | 
|  | 0xba, 0x72, 0x9b, 0xf5, 0xa2, 0x6e, 0xbe, 0x5d), | 
|  | }; | 
|  |  | 
|  | /* ACPI _DSD data subnodes GUID: dbb8e3e6-5886-4ba6-8795-1319f52a966b */ | 
|  | static const guid_t ads_guid = | 
|  | GUID_INIT(0xdbb8e3e6, 0x5886, 0x4ba6, | 
|  | 0x87, 0x95, 0x13, 0x19, 0xf5, 0x2a, 0x96, 0x6b); | 
|  |  | 
|  | static bool acpi_enumerate_nondev_subnodes(acpi_handle scope, | 
|  | const union acpi_object *desc, | 
|  | struct acpi_device_data *data, | 
|  | struct fwnode_handle *parent); | 
|  | static bool acpi_extract_properties(const union acpi_object *desc, | 
|  | struct acpi_device_data *data); | 
|  |  | 
|  | static bool acpi_nondev_subnode_extract(const union acpi_object *desc, | 
|  | acpi_handle handle, | 
|  | const union acpi_object *link, | 
|  | struct list_head *list, | 
|  | struct fwnode_handle *parent) | 
|  | { | 
|  | struct acpi_data_node *dn; | 
|  | bool result; | 
|  |  | 
|  | dn = kzalloc(sizeof(*dn), GFP_KERNEL); | 
|  | if (!dn) | 
|  | return false; | 
|  |  | 
|  | dn->name = link->package.elements[0].string.pointer; | 
|  | dn->fwnode.ops = &acpi_data_fwnode_ops; | 
|  | dn->parent = parent; | 
|  | INIT_LIST_HEAD(&dn->data.properties); | 
|  | INIT_LIST_HEAD(&dn->data.subnodes); | 
|  |  | 
|  | result = acpi_extract_properties(desc, &dn->data); | 
|  |  | 
|  | if (handle) { | 
|  | acpi_handle scope; | 
|  | acpi_status status; | 
|  |  | 
|  | /* | 
|  | * The scope for the subnode object lookup is the one of the | 
|  | * namespace node (device) containing the object that has | 
|  | * returned the package.  That is, it's the scope of that | 
|  | * object's parent. | 
|  | */ | 
|  | status = acpi_get_parent(handle, &scope); | 
|  | if (ACPI_SUCCESS(status) | 
|  | && acpi_enumerate_nondev_subnodes(scope, desc, &dn->data, | 
|  | &dn->fwnode)) | 
|  | result = true; | 
|  | } else if (acpi_enumerate_nondev_subnodes(NULL, desc, &dn->data, | 
|  | &dn->fwnode)) { | 
|  | result = true; | 
|  | } | 
|  |  | 
|  | if (result) { | 
|  | dn->handle = handle; | 
|  | dn->data.pointer = desc; | 
|  | list_add_tail(&dn->sibling, list); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | kfree(dn); | 
|  | acpi_handle_debug(handle, "Invalid properties/subnodes data, skipping\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool acpi_nondev_subnode_data_ok(acpi_handle handle, | 
|  | const union acpi_object *link, | 
|  | struct list_head *list, | 
|  | struct fwnode_handle *parent) | 
|  | { | 
|  | struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER }; | 
|  | acpi_status status; | 
|  |  | 
|  | status = acpi_evaluate_object_typed(handle, NULL, NULL, &buf, | 
|  | ACPI_TYPE_PACKAGE); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return false; | 
|  |  | 
|  | if (acpi_nondev_subnode_extract(buf.pointer, handle, link, list, | 
|  | parent)) | 
|  | return true; | 
|  |  | 
|  | ACPI_FREE(buf.pointer); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool acpi_nondev_subnode_ok(acpi_handle scope, | 
|  | const union acpi_object *link, | 
|  | struct list_head *list, | 
|  | struct fwnode_handle *parent) | 
|  | { | 
|  | acpi_handle handle; | 
|  | acpi_status status; | 
|  |  | 
|  | if (!scope) | 
|  | return false; | 
|  |  | 
|  | status = acpi_get_handle(scope, link->package.elements[1].string.pointer, | 
|  | &handle); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return false; | 
|  |  | 
|  | return acpi_nondev_subnode_data_ok(handle, link, list, parent); | 
|  | } | 
|  |  | 
|  | static int acpi_add_nondev_subnodes(acpi_handle scope, | 
|  | const union acpi_object *links, | 
|  | struct list_head *list, | 
|  | struct fwnode_handle *parent) | 
|  | { | 
|  | bool ret = false; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < links->package.count; i++) { | 
|  | const union acpi_object *link, *desc; | 
|  | acpi_handle handle; | 
|  | bool result; | 
|  |  | 
|  | link = &links->package.elements[i]; | 
|  | /* Only two elements allowed. */ | 
|  | if (link->package.count != 2) | 
|  | continue; | 
|  |  | 
|  | /* The first one must be a string. */ | 
|  | if (link->package.elements[0].type != ACPI_TYPE_STRING) | 
|  | continue; | 
|  |  | 
|  | /* The second one may be a string, a reference or a package. */ | 
|  | switch (link->package.elements[1].type) { | 
|  | case ACPI_TYPE_STRING: | 
|  | result = acpi_nondev_subnode_ok(scope, link, list, | 
|  | parent); | 
|  | break; | 
|  | case ACPI_TYPE_LOCAL_REFERENCE: | 
|  | handle = link->package.elements[1].reference.handle; | 
|  | result = acpi_nondev_subnode_data_ok(handle, link, list, | 
|  | parent); | 
|  | break; | 
|  | case ACPI_TYPE_PACKAGE: | 
|  | desc = &link->package.elements[1]; | 
|  | result = acpi_nondev_subnode_extract(desc, NULL, link, | 
|  | list, parent); | 
|  | break; | 
|  | default: | 
|  | result = false; | 
|  | break; | 
|  | } | 
|  | ret = ret || result; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static bool acpi_enumerate_nondev_subnodes(acpi_handle scope, | 
|  | const union acpi_object *desc, | 
|  | struct acpi_device_data *data, | 
|  | struct fwnode_handle *parent) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* Look for the ACPI data subnodes GUID. */ | 
|  | for (i = 0; i < desc->package.count; i += 2) { | 
|  | const union acpi_object *guid, *links; | 
|  |  | 
|  | guid = &desc->package.elements[i]; | 
|  | links = &desc->package.elements[i + 1]; | 
|  |  | 
|  | /* | 
|  | * The first element must be a GUID and the second one must be | 
|  | * a package. | 
|  | */ | 
|  | if (guid->type != ACPI_TYPE_BUFFER || | 
|  | guid->buffer.length != 16 || | 
|  | links->type != ACPI_TYPE_PACKAGE) | 
|  | break; | 
|  |  | 
|  | if (!guid_equal((guid_t *)guid->buffer.pointer, &ads_guid)) | 
|  | continue; | 
|  |  | 
|  | return acpi_add_nondev_subnodes(scope, links, &data->subnodes, | 
|  | parent); | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool acpi_property_value_ok(const union acpi_object *value) | 
|  | { | 
|  | int j; | 
|  |  | 
|  | /* | 
|  | * The value must be an integer, a string, a reference, or a package | 
|  | * whose every element must be an integer, a string, or a reference. | 
|  | */ | 
|  | switch (value->type) { | 
|  | case ACPI_TYPE_INTEGER: | 
|  | case ACPI_TYPE_STRING: | 
|  | case ACPI_TYPE_LOCAL_REFERENCE: | 
|  | return true; | 
|  |  | 
|  | case ACPI_TYPE_PACKAGE: | 
|  | for (j = 0; j < value->package.count; j++) | 
|  | switch (value->package.elements[j].type) { | 
|  | case ACPI_TYPE_INTEGER: | 
|  | case ACPI_TYPE_STRING: | 
|  | case ACPI_TYPE_LOCAL_REFERENCE: | 
|  | continue; | 
|  |  | 
|  | default: | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool acpi_properties_format_valid(const union acpi_object *properties) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < properties->package.count; i++) { | 
|  | const union acpi_object *property; | 
|  |  | 
|  | property = &properties->package.elements[i]; | 
|  | /* | 
|  | * Only two elements allowed, the first one must be a string and | 
|  | * the second one has to satisfy certain conditions. | 
|  | */ | 
|  | if (property->package.count != 2 | 
|  | || property->package.elements[0].type != ACPI_TYPE_STRING | 
|  | || !acpi_property_value_ok(&property->package.elements[1])) | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void acpi_init_of_compatible(struct acpi_device *adev) | 
|  | { | 
|  | const union acpi_object *of_compatible; | 
|  | int ret; | 
|  |  | 
|  | ret = acpi_data_get_property_array(&adev->data, "compatible", | 
|  | ACPI_TYPE_STRING, &of_compatible); | 
|  | if (ret) { | 
|  | ret = acpi_dev_get_property(adev, "compatible", | 
|  | ACPI_TYPE_STRING, &of_compatible); | 
|  | if (ret) { | 
|  | if (adev->parent | 
|  | && adev->parent->flags.of_compatible_ok) | 
|  | goto out; | 
|  |  | 
|  | return; | 
|  | } | 
|  | } | 
|  | adev->data.of_compatible = of_compatible; | 
|  |  | 
|  | out: | 
|  | adev->flags.of_compatible_ok = 1; | 
|  | } | 
|  |  | 
|  | static bool acpi_is_property_guid(const guid_t *guid) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(prp_guids); i++) { | 
|  | if (guid_equal(guid, &prp_guids[i])) | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | struct acpi_device_properties * | 
|  | acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid, | 
|  | const union acpi_object *properties) | 
|  | { | 
|  | struct acpi_device_properties *props; | 
|  |  | 
|  | props = kzalloc(sizeof(*props), GFP_KERNEL); | 
|  | if (props) { | 
|  | INIT_LIST_HEAD(&props->list); | 
|  | props->guid = guid; | 
|  | props->properties = properties; | 
|  | list_add_tail(&props->list, &data->properties); | 
|  | } | 
|  |  | 
|  | return props; | 
|  | } | 
|  |  | 
|  | static bool acpi_extract_properties(const union acpi_object *desc, | 
|  | struct acpi_device_data *data) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (desc->package.count % 2) | 
|  | return false; | 
|  |  | 
|  | /* Look for the device properties GUID. */ | 
|  | for (i = 0; i < desc->package.count; i += 2) { | 
|  | const union acpi_object *guid, *properties; | 
|  |  | 
|  | guid = &desc->package.elements[i]; | 
|  | properties = &desc->package.elements[i + 1]; | 
|  |  | 
|  | /* | 
|  | * The first element must be a GUID and the second one must be | 
|  | * a package. | 
|  | */ | 
|  | if (guid->type != ACPI_TYPE_BUFFER || | 
|  | guid->buffer.length != 16 || | 
|  | properties->type != ACPI_TYPE_PACKAGE) | 
|  | break; | 
|  |  | 
|  | if (!acpi_is_property_guid((guid_t *)guid->buffer.pointer)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * We found the matching GUID. Now validate the format of the | 
|  | * package immediately following it. | 
|  | */ | 
|  | if (!acpi_properties_format_valid(properties)) | 
|  | continue; | 
|  |  | 
|  | acpi_data_add_props(data, (const guid_t *)guid->buffer.pointer, | 
|  | properties); | 
|  | } | 
|  |  | 
|  | return !list_empty(&data->properties); | 
|  | } | 
|  |  | 
|  | void acpi_init_properties(struct acpi_device *adev) | 
|  | { | 
|  | struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER }; | 
|  | struct acpi_hardware_id *hwid; | 
|  | acpi_status status; | 
|  | bool acpi_of = false; | 
|  |  | 
|  | INIT_LIST_HEAD(&adev->data.properties); | 
|  | INIT_LIST_HEAD(&adev->data.subnodes); | 
|  |  | 
|  | if (!adev->handle) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Check if ACPI_DT_NAMESPACE_HID is present and inthat case we fill in | 
|  | * Device Tree compatible properties for this device. | 
|  | */ | 
|  | list_for_each_entry(hwid, &adev->pnp.ids, list) { | 
|  | if (!strcmp(hwid->id, ACPI_DT_NAMESPACE_HID)) { | 
|  | acpi_of = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | status = acpi_evaluate_object_typed(adev->handle, "_DSD", NULL, &buf, | 
|  | ACPI_TYPE_PACKAGE); | 
|  | if (ACPI_FAILURE(status)) | 
|  | goto out; | 
|  |  | 
|  | if (acpi_extract_properties(buf.pointer, &adev->data)) { | 
|  | adev->data.pointer = buf.pointer; | 
|  | if (acpi_of) | 
|  | acpi_init_of_compatible(adev); | 
|  | } | 
|  | if (acpi_enumerate_nondev_subnodes(adev->handle, buf.pointer, | 
|  | &adev->data, acpi_fwnode_handle(adev))) | 
|  | adev->data.pointer = buf.pointer; | 
|  |  | 
|  | if (!adev->data.pointer) { | 
|  | acpi_handle_debug(adev->handle, "Invalid _DSD data, skipping\n"); | 
|  | ACPI_FREE(buf.pointer); | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (acpi_of && !adev->flags.of_compatible_ok) | 
|  | acpi_handle_info(adev->handle, | 
|  | ACPI_DT_NAMESPACE_HID " requires 'compatible' property\n"); | 
|  |  | 
|  | if (!adev->data.pointer) | 
|  | acpi_extract_apple_properties(adev); | 
|  | } | 
|  |  | 
|  | static void acpi_destroy_nondev_subnodes(struct list_head *list) | 
|  | { | 
|  | struct acpi_data_node *dn, *next; | 
|  |  | 
|  | if (list_empty(list)) | 
|  | return; | 
|  |  | 
|  | list_for_each_entry_safe_reverse(dn, next, list, sibling) { | 
|  | acpi_destroy_nondev_subnodes(&dn->data.subnodes); | 
|  | wait_for_completion(&dn->kobj_done); | 
|  | list_del(&dn->sibling); | 
|  | ACPI_FREE((void *)dn->data.pointer); | 
|  | kfree(dn); | 
|  | } | 
|  | } | 
|  |  | 
|  | void acpi_free_properties(struct acpi_device *adev) | 
|  | { | 
|  | struct acpi_device_properties *props, *tmp; | 
|  |  | 
|  | acpi_destroy_nondev_subnodes(&adev->data.subnodes); | 
|  | ACPI_FREE((void *)adev->data.pointer); | 
|  | adev->data.of_compatible = NULL; | 
|  | adev->data.pointer = NULL; | 
|  | list_for_each_entry_safe(props, tmp, &adev->data.properties, list) { | 
|  | list_del(&props->list); | 
|  | kfree(props); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_data_get_property - return an ACPI property with given name | 
|  | * @data: ACPI device deta object to get the property from | 
|  | * @name: Name of the property | 
|  | * @type: Expected property type | 
|  | * @obj: Location to store the property value (if not %NULL) | 
|  | * | 
|  | * Look up a property with @name and store a pointer to the resulting ACPI | 
|  | * object at the location pointed to by @obj if found. | 
|  | * | 
|  | * Callers must not attempt to free the returned objects.  These objects will be | 
|  | * freed by the ACPI core automatically during the removal of @data. | 
|  | * | 
|  | * Return: %0 if property with @name has been found (success), | 
|  | *         %-EINVAL if the arguments are invalid, | 
|  | *         %-EINVAL if the property doesn't exist, | 
|  | *         %-EPROTO if the property value type doesn't match @type. | 
|  | */ | 
|  | static int acpi_data_get_property(const struct acpi_device_data *data, | 
|  | const char *name, acpi_object_type type, | 
|  | const union acpi_object **obj) | 
|  | { | 
|  | const struct acpi_device_properties *props; | 
|  |  | 
|  | if (!data || !name) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!data->pointer || list_empty(&data->properties)) | 
|  | return -EINVAL; | 
|  |  | 
|  | list_for_each_entry(props, &data->properties, list) { | 
|  | const union acpi_object *properties; | 
|  | unsigned int i; | 
|  |  | 
|  | properties = props->properties; | 
|  | for (i = 0; i < properties->package.count; i++) { | 
|  | const union acpi_object *propname, *propvalue; | 
|  | const union acpi_object *property; | 
|  |  | 
|  | property = &properties->package.elements[i]; | 
|  |  | 
|  | propname = &property->package.elements[0]; | 
|  | propvalue = &property->package.elements[1]; | 
|  |  | 
|  | if (!strcmp(name, propname->string.pointer)) { | 
|  | if (type != ACPI_TYPE_ANY && | 
|  | propvalue->type != type) | 
|  | return -EPROTO; | 
|  | if (obj) | 
|  | *obj = propvalue; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_dev_get_property - return an ACPI property with given name. | 
|  | * @adev: ACPI device to get the property from. | 
|  | * @name: Name of the property. | 
|  | * @type: Expected property type. | 
|  | * @obj: Location to store the property value (if not %NULL). | 
|  | */ | 
|  | int acpi_dev_get_property(const struct acpi_device *adev, const char *name, | 
|  | acpi_object_type type, const union acpi_object **obj) | 
|  | { | 
|  | return adev ? acpi_data_get_property(&adev->data, name, type, obj) : -EINVAL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(acpi_dev_get_property); | 
|  |  | 
|  | static const struct acpi_device_data * | 
|  | acpi_device_data_of_node(const struct fwnode_handle *fwnode) | 
|  | { | 
|  | if (is_acpi_device_node(fwnode)) { | 
|  | const struct acpi_device *adev = to_acpi_device_node(fwnode); | 
|  | return &adev->data; | 
|  | } else if (is_acpi_data_node(fwnode)) { | 
|  | const struct acpi_data_node *dn = to_acpi_data_node(fwnode); | 
|  | return &dn->data; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_node_prop_get - return an ACPI property with given name. | 
|  | * @fwnode: Firmware node to get the property from. | 
|  | * @propname: Name of the property. | 
|  | * @valptr: Location to store a pointer to the property value (if not %NULL). | 
|  | */ | 
|  | int acpi_node_prop_get(const struct fwnode_handle *fwnode, | 
|  | const char *propname, void **valptr) | 
|  | { | 
|  | return acpi_data_get_property(acpi_device_data_of_node(fwnode), | 
|  | propname, ACPI_TYPE_ANY, | 
|  | (const union acpi_object **)valptr); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_data_get_property_array - return an ACPI array property with given name | 
|  | * @adev: ACPI data object to get the property from | 
|  | * @name: Name of the property | 
|  | * @type: Expected type of array elements | 
|  | * @obj: Location to store a pointer to the property value (if not NULL) | 
|  | * | 
|  | * Look up an array property with @name and store a pointer to the resulting | 
|  | * ACPI object at the location pointed to by @obj if found. | 
|  | * | 
|  | * Callers must not attempt to free the returned objects.  Those objects will be | 
|  | * freed by the ACPI core automatically during the removal of @data. | 
|  | * | 
|  | * Return: %0 if array property (package) with @name has been found (success), | 
|  | *         %-EINVAL if the arguments are invalid, | 
|  | *         %-EINVAL if the property doesn't exist, | 
|  | *         %-EPROTO if the property is not a package or the type of its elements | 
|  | *           doesn't match @type. | 
|  | */ | 
|  | static int acpi_data_get_property_array(const struct acpi_device_data *data, | 
|  | const char *name, | 
|  | acpi_object_type type, | 
|  | const union acpi_object **obj) | 
|  | { | 
|  | const union acpi_object *prop; | 
|  | int ret, i; | 
|  |  | 
|  | ret = acpi_data_get_property(data, name, ACPI_TYPE_PACKAGE, &prop); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (type != ACPI_TYPE_ANY) { | 
|  | /* Check that all elements are of correct type. */ | 
|  | for (i = 0; i < prop->package.count; i++) | 
|  | if (prop->package.elements[i].type != type) | 
|  | return -EPROTO; | 
|  | } | 
|  | if (obj) | 
|  | *obj = prop; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct fwnode_handle * | 
|  | acpi_fwnode_get_named_child_node(const struct fwnode_handle *fwnode, | 
|  | const char *childname) | 
|  | { | 
|  | char name[ACPI_PATH_SEGMENT_LENGTH]; | 
|  | struct fwnode_handle *child; | 
|  | struct acpi_buffer path; | 
|  | acpi_status status; | 
|  |  | 
|  | path.length = sizeof(name); | 
|  | path.pointer = name; | 
|  |  | 
|  | fwnode_for_each_child_node(fwnode, child) { | 
|  | if (is_acpi_data_node(child)) { | 
|  | if (acpi_data_node_match(child, childname)) | 
|  | return child; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | status = acpi_get_name(ACPI_HANDLE_FWNODE(child), | 
|  | ACPI_SINGLE_NAME, &path); | 
|  | if (ACPI_FAILURE(status)) | 
|  | break; | 
|  |  | 
|  | if (!strncmp(name, childname, ACPI_NAMESEG_SIZE)) | 
|  | return child; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __acpi_node_get_property_reference - returns handle to the referenced object | 
|  | * @fwnode: Firmware node to get the property from | 
|  | * @propname: Name of the property | 
|  | * @index: Index of the reference to return | 
|  | * @num_args: Maximum number of arguments after each reference | 
|  | * @args: Location to store the returned reference with optional arguments | 
|  | * | 
|  | * Find property with @name, verifify that it is a package containing at least | 
|  | * one object reference and if so, store the ACPI device object pointer to the | 
|  | * target object in @args->adev.  If the reference includes arguments, store | 
|  | * them in the @args->args[] array. | 
|  | * | 
|  | * If there's more than one reference in the property value package, @index is | 
|  | * used to select the one to return. | 
|  | * | 
|  | * It is possible to leave holes in the property value set like in the | 
|  | * example below: | 
|  | * | 
|  | * Package () { | 
|  | *     "cs-gpios", | 
|  | *     Package () { | 
|  | *        ^GPIO, 19, 0, 0, | 
|  | *        ^GPIO, 20, 0, 0, | 
|  | *        0, | 
|  | *        ^GPIO, 21, 0, 0, | 
|  | *     } | 
|  | * } | 
|  | * | 
|  | * Calling this function with index %2 or index %3 return %-ENOENT. If the | 
|  | * property does not contain any more values %-ENOENT is returned. The NULL | 
|  | * entry must be single integer and preferably contain value %0. | 
|  | * | 
|  | * Return: %0 on success, negative error code on failure. | 
|  | */ | 
|  | int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode, | 
|  | const char *propname, size_t index, size_t num_args, | 
|  | struct fwnode_reference_args *args) | 
|  | { | 
|  | const union acpi_object *element, *end; | 
|  | const union acpi_object *obj; | 
|  | const struct acpi_device_data *data; | 
|  | struct acpi_device *device; | 
|  | int ret, idx = 0; | 
|  |  | 
|  | data = acpi_device_data_of_node(fwnode); | 
|  | if (!data) | 
|  | return -ENOENT; | 
|  |  | 
|  | ret = acpi_data_get_property(data, propname, ACPI_TYPE_ANY, &obj); | 
|  | if (ret) | 
|  | return ret == -EINVAL ? -ENOENT : -EINVAL; | 
|  |  | 
|  | /* | 
|  | * The simplest case is when the value is a single reference.  Just | 
|  | * return that reference then. | 
|  | */ | 
|  | if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) { | 
|  | if (index) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = acpi_bus_get_device(obj->reference.handle, &device); | 
|  | if (ret) | 
|  | return ret == -ENODEV ? -EINVAL : ret; | 
|  |  | 
|  | args->fwnode = acpi_fwnode_handle(device); | 
|  | args->nargs = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If it is not a single reference, then it is a package of | 
|  | * references followed by number of ints as follows: | 
|  | * | 
|  | *  Package () { REF, INT, REF, INT, INT } | 
|  | * | 
|  | * The index argument is then used to determine which reference | 
|  | * the caller wants (along with the arguments). | 
|  | */ | 
|  | if (obj->type != ACPI_TYPE_PACKAGE) | 
|  | return -EINVAL; | 
|  | if (index >= obj->package.count) | 
|  | return -ENOENT; | 
|  |  | 
|  | element = obj->package.elements; | 
|  | end = element + obj->package.count; | 
|  |  | 
|  | while (element < end) { | 
|  | u32 nargs, i; | 
|  |  | 
|  | if (element->type == ACPI_TYPE_LOCAL_REFERENCE) { | 
|  | struct fwnode_handle *ref_fwnode; | 
|  |  | 
|  | ret = acpi_bus_get_device(element->reference.handle, | 
|  | &device); | 
|  | if (ret) | 
|  | return -EINVAL; | 
|  |  | 
|  | nargs = 0; | 
|  | element++; | 
|  |  | 
|  | /* | 
|  | * Find the referred data extension node under the | 
|  | * referred device node. | 
|  | */ | 
|  | for (ref_fwnode = acpi_fwnode_handle(device); | 
|  | element < end && element->type == ACPI_TYPE_STRING; | 
|  | element++) { | 
|  | ref_fwnode = acpi_fwnode_get_named_child_node( | 
|  | ref_fwnode, element->string.pointer); | 
|  | if (!ref_fwnode) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* assume following integer elements are all args */ | 
|  | for (i = 0; element + i < end && i < num_args; i++) { | 
|  | int type = element[i].type; | 
|  |  | 
|  | if (type == ACPI_TYPE_INTEGER) | 
|  | nargs++; | 
|  | else if (type == ACPI_TYPE_LOCAL_REFERENCE) | 
|  | break; | 
|  | else | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (nargs > NR_FWNODE_REFERENCE_ARGS) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (idx == index) { | 
|  | args->fwnode = ref_fwnode; | 
|  | args->nargs = nargs; | 
|  | for (i = 0; i < nargs; i++) | 
|  | args->args[i] = element[i].integer.value; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | element += nargs; | 
|  | } else if (element->type == ACPI_TYPE_INTEGER) { | 
|  | if (idx == index) | 
|  | return -ENOENT; | 
|  | element++; | 
|  | } else { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | idx++; | 
|  | } | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(__acpi_node_get_property_reference); | 
|  |  | 
|  | static int acpi_data_prop_read_single(const struct acpi_device_data *data, | 
|  | const char *propname, | 
|  | enum dev_prop_type proptype, void *val) | 
|  | { | 
|  | const union acpi_object *obj; | 
|  | int ret; | 
|  |  | 
|  | if (!val) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (proptype >= DEV_PROP_U8 && proptype <= DEV_PROP_U64) { | 
|  | ret = acpi_data_get_property(data, propname, ACPI_TYPE_INTEGER, &obj); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | switch (proptype) { | 
|  | case DEV_PROP_U8: | 
|  | if (obj->integer.value > U8_MAX) | 
|  | return -EOVERFLOW; | 
|  | *(u8 *)val = obj->integer.value; | 
|  | break; | 
|  | case DEV_PROP_U16: | 
|  | if (obj->integer.value > U16_MAX) | 
|  | return -EOVERFLOW; | 
|  | *(u16 *)val = obj->integer.value; | 
|  | break; | 
|  | case DEV_PROP_U32: | 
|  | if (obj->integer.value > U32_MAX) | 
|  | return -EOVERFLOW; | 
|  | *(u32 *)val = obj->integer.value; | 
|  | break; | 
|  | default: | 
|  | *(u64 *)val = obj->integer.value; | 
|  | break; | 
|  | } | 
|  | } else if (proptype == DEV_PROP_STRING) { | 
|  | ret = acpi_data_get_property(data, propname, ACPI_TYPE_STRING, &obj); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | *(char **)val = obj->string.pointer; | 
|  |  | 
|  | return 1; | 
|  | } else { | 
|  | ret = -EINVAL; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname, | 
|  | enum dev_prop_type proptype, void *val) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!adev) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = acpi_data_prop_read_single(&adev->data, propname, proptype, val); | 
|  | if (ret < 0 || proptype != ACPI_TYPE_STRING) | 
|  | return ret; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_copy_property_array_u8(const union acpi_object *items, u8 *val, | 
|  | size_t nval) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nval; i++) { | 
|  | if (items[i].type != ACPI_TYPE_INTEGER) | 
|  | return -EPROTO; | 
|  | if (items[i].integer.value > U8_MAX) | 
|  | return -EOVERFLOW; | 
|  |  | 
|  | val[i] = items[i].integer.value; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_copy_property_array_u16(const union acpi_object *items, | 
|  | u16 *val, size_t nval) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nval; i++) { | 
|  | if (items[i].type != ACPI_TYPE_INTEGER) | 
|  | return -EPROTO; | 
|  | if (items[i].integer.value > U16_MAX) | 
|  | return -EOVERFLOW; | 
|  |  | 
|  | val[i] = items[i].integer.value; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_copy_property_array_u32(const union acpi_object *items, | 
|  | u32 *val, size_t nval) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nval; i++) { | 
|  | if (items[i].type != ACPI_TYPE_INTEGER) | 
|  | return -EPROTO; | 
|  | if (items[i].integer.value > U32_MAX) | 
|  | return -EOVERFLOW; | 
|  |  | 
|  | val[i] = items[i].integer.value; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_copy_property_array_u64(const union acpi_object *items, | 
|  | u64 *val, size_t nval) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nval; i++) { | 
|  | if (items[i].type != ACPI_TYPE_INTEGER) | 
|  | return -EPROTO; | 
|  |  | 
|  | val[i] = items[i].integer.value; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_copy_property_array_string(const union acpi_object *items, | 
|  | char **val, size_t nval) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nval; i++) { | 
|  | if (items[i].type != ACPI_TYPE_STRING) | 
|  | return -EPROTO; | 
|  |  | 
|  | val[i] = items[i].string.pointer; | 
|  | } | 
|  | return nval; | 
|  | } | 
|  |  | 
|  | static int acpi_data_prop_read(const struct acpi_device_data *data, | 
|  | const char *propname, | 
|  | enum dev_prop_type proptype, | 
|  | void *val, size_t nval) | 
|  | { | 
|  | const union acpi_object *obj; | 
|  | const union acpi_object *items; | 
|  | int ret; | 
|  |  | 
|  | if (val && nval == 1) { | 
|  | ret = acpi_data_prop_read_single(data, propname, proptype, val); | 
|  | if (ret >= 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = acpi_data_get_property_array(data, propname, ACPI_TYPE_ANY, &obj); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (!val) | 
|  | return obj->package.count; | 
|  |  | 
|  | if (proptype != DEV_PROP_STRING && nval > obj->package.count) | 
|  | return -EOVERFLOW; | 
|  | else if (nval <= 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | items = obj->package.elements; | 
|  |  | 
|  | switch (proptype) { | 
|  | case DEV_PROP_U8: | 
|  | ret = acpi_copy_property_array_u8(items, (u8 *)val, nval); | 
|  | break; | 
|  | case DEV_PROP_U16: | 
|  | ret = acpi_copy_property_array_u16(items, (u16 *)val, nval); | 
|  | break; | 
|  | case DEV_PROP_U32: | 
|  | ret = acpi_copy_property_array_u32(items, (u32 *)val, nval); | 
|  | break; | 
|  | case DEV_PROP_U64: | 
|  | ret = acpi_copy_property_array_u64(items, (u64 *)val, nval); | 
|  | break; | 
|  | case DEV_PROP_STRING: | 
|  | ret = acpi_copy_property_array_string( | 
|  | items, (char **)val, | 
|  | min_t(u32, nval, obj->package.count)); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int acpi_dev_prop_read(const struct acpi_device *adev, const char *propname, | 
|  | enum dev_prop_type proptype, void *val, size_t nval) | 
|  | { | 
|  | return adev ? acpi_data_prop_read(&adev->data, propname, proptype, val, nval) : -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_node_prop_read - retrieve the value of an ACPI property with given name. | 
|  | * @fwnode: Firmware node to get the property from. | 
|  | * @propname: Name of the property. | 
|  | * @proptype: Expected property type. | 
|  | * @val: Location to store the property value (if not %NULL). | 
|  | * @nval: Size of the array pointed to by @val. | 
|  | * | 
|  | * If @val is %NULL, return the number of array elements comprising the value | 
|  | * of the property.  Otherwise, read at most @nval values to the array at the | 
|  | * location pointed to by @val. | 
|  | */ | 
|  | int acpi_node_prop_read(const struct fwnode_handle *fwnode, | 
|  | const char *propname, enum dev_prop_type proptype, | 
|  | void *val, size_t nval) | 
|  | { | 
|  | return acpi_data_prop_read(acpi_device_data_of_node(fwnode), | 
|  | propname, proptype, val, nval); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_get_next_subnode - Return the next child node handle for a fwnode | 
|  | * @fwnode: Firmware node to find the next child node for. | 
|  | * @child: Handle to one of the device's child nodes or a null handle. | 
|  | */ | 
|  | struct fwnode_handle *acpi_get_next_subnode(const struct fwnode_handle *fwnode, | 
|  | struct fwnode_handle *child) | 
|  | { | 
|  | const struct acpi_device *adev = to_acpi_device_node(fwnode); | 
|  | const struct list_head *head; | 
|  | struct list_head *next; | 
|  |  | 
|  | if (!child || is_acpi_device_node(child)) { | 
|  | struct acpi_device *child_adev; | 
|  |  | 
|  | if (adev) | 
|  | head = &adev->children; | 
|  | else | 
|  | goto nondev; | 
|  |  | 
|  | if (list_empty(head)) | 
|  | goto nondev; | 
|  |  | 
|  | if (child) { | 
|  | adev = to_acpi_device_node(child); | 
|  | next = adev->node.next; | 
|  | if (next == head) { | 
|  | child = NULL; | 
|  | goto nondev; | 
|  | } | 
|  | child_adev = list_entry(next, struct acpi_device, node); | 
|  | } else { | 
|  | child_adev = list_first_entry(head, struct acpi_device, | 
|  | node); | 
|  | } | 
|  | return acpi_fwnode_handle(child_adev); | 
|  | } | 
|  |  | 
|  | nondev: | 
|  | if (!child || is_acpi_data_node(child)) { | 
|  | const struct acpi_data_node *data = to_acpi_data_node(fwnode); | 
|  | struct acpi_data_node *dn; | 
|  |  | 
|  | /* | 
|  | * We can have a combination of device and data nodes, e.g. with | 
|  | * hierarchical _DSD properties. Make sure the adev pointer is | 
|  | * restored before going through data nodes, otherwise we will | 
|  | * be looking for data_nodes below the last device found instead | 
|  | * of the common fwnode shared by device_nodes and data_nodes. | 
|  | */ | 
|  | adev = to_acpi_device_node(fwnode); | 
|  | if (adev) | 
|  | head = &adev->data.subnodes; | 
|  | else if (data) | 
|  | head = &data->data.subnodes; | 
|  | else | 
|  | return NULL; | 
|  |  | 
|  | if (list_empty(head)) | 
|  | return NULL; | 
|  |  | 
|  | if (child) { | 
|  | dn = to_acpi_data_node(child); | 
|  | next = dn->sibling.next; | 
|  | if (next == head) | 
|  | return NULL; | 
|  |  | 
|  | dn = list_entry(next, struct acpi_data_node, sibling); | 
|  | } else { | 
|  | dn = list_first_entry(head, struct acpi_data_node, sibling); | 
|  | } | 
|  | return &dn->fwnode; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_node_get_parent - Return parent fwnode of this fwnode | 
|  | * @fwnode: Firmware node whose parent to get | 
|  | * | 
|  | * Returns parent node of an ACPI device or data firmware node or %NULL if | 
|  | * not available. | 
|  | */ | 
|  | struct fwnode_handle *acpi_node_get_parent(const struct fwnode_handle *fwnode) | 
|  | { | 
|  | if (is_acpi_data_node(fwnode)) { | 
|  | /* All data nodes have parent pointer so just return that */ | 
|  | return to_acpi_data_node(fwnode)->parent; | 
|  | } else if (is_acpi_device_node(fwnode)) { | 
|  | acpi_handle handle, parent_handle; | 
|  |  | 
|  | handle = to_acpi_device_node(fwnode)->handle; | 
|  | if (ACPI_SUCCESS(acpi_get_parent(handle, &parent_handle))) { | 
|  | struct acpi_device *adev; | 
|  |  | 
|  | if (!acpi_bus_get_device(parent_handle, &adev)) | 
|  | return acpi_fwnode_handle(adev); | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return true if the node is an ACPI graph node. Called on either ports | 
|  | * or endpoints. | 
|  | */ | 
|  | static bool is_acpi_graph_node(struct fwnode_handle *fwnode, | 
|  | const char *str) | 
|  | { | 
|  | unsigned int len = strlen(str); | 
|  | const char *name; | 
|  |  | 
|  | if (!len || !is_acpi_data_node(fwnode)) | 
|  | return false; | 
|  |  | 
|  | name = to_acpi_data_node(fwnode)->name; | 
|  |  | 
|  | return (fwnode_property_present(fwnode, "reg") && | 
|  | !strncmp(name, str, len) && name[len] == '@') || | 
|  | fwnode_property_present(fwnode, str); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_graph_get_next_endpoint - Get next endpoint ACPI firmware node | 
|  | * @fwnode: Pointer to the parent firmware node | 
|  | * @prev: Previous endpoint node or %NULL to get the first | 
|  | * | 
|  | * Looks up next endpoint ACPI firmware node below a given @fwnode. Returns | 
|  | * %NULL if there is no next endpoint or in case of error. In case of success | 
|  | * the next endpoint is returned. | 
|  | */ | 
|  | static struct fwnode_handle *acpi_graph_get_next_endpoint( | 
|  | const struct fwnode_handle *fwnode, struct fwnode_handle *prev) | 
|  | { | 
|  | struct fwnode_handle *port = NULL; | 
|  | struct fwnode_handle *endpoint; | 
|  |  | 
|  | if (!prev) { | 
|  | do { | 
|  | port = fwnode_get_next_child_node(fwnode, port); | 
|  | /* | 
|  | * The names of the port nodes begin with "port@" | 
|  | * followed by the number of the port node and they also | 
|  | * have a "reg" property that also has the number of the | 
|  | * port node. For compatibility reasons a node is also | 
|  | * recognised as a port node from the "port" property. | 
|  | */ | 
|  | if (is_acpi_graph_node(port, "port")) | 
|  | break; | 
|  | } while (port); | 
|  | } else { | 
|  | port = fwnode_get_parent(prev); | 
|  | } | 
|  |  | 
|  | if (!port) | 
|  | return NULL; | 
|  |  | 
|  | endpoint = fwnode_get_next_child_node(port, prev); | 
|  | while (!endpoint) { | 
|  | port = fwnode_get_next_child_node(fwnode, port); | 
|  | if (!port) | 
|  | break; | 
|  | if (is_acpi_graph_node(port, "port")) | 
|  | endpoint = fwnode_get_next_child_node(port, NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The names of the endpoint nodes begin with "endpoint@" followed by | 
|  | * the number of the endpoint node and they also have a "reg" property | 
|  | * that also has the number of the endpoint node. For compatibility | 
|  | * reasons a node is also recognised as an endpoint node from the | 
|  | * "endpoint" property. | 
|  | */ | 
|  | if (!is_acpi_graph_node(endpoint, "endpoint")) | 
|  | return NULL; | 
|  |  | 
|  | return endpoint; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * acpi_graph_get_child_prop_value - Return a child with a given property value | 
|  | * @fwnode: device fwnode | 
|  | * @prop_name: The name of the property to look for | 
|  | * @val: the desired property value | 
|  | * | 
|  | * Return the port node corresponding to a given port number. Returns | 
|  | * the child node on success, NULL otherwise. | 
|  | */ | 
|  | static struct fwnode_handle *acpi_graph_get_child_prop_value( | 
|  | const struct fwnode_handle *fwnode, const char *prop_name, | 
|  | unsigned int val) | 
|  | { | 
|  | struct fwnode_handle *child; | 
|  |  | 
|  | fwnode_for_each_child_node(fwnode, child) { | 
|  | u32 nr; | 
|  |  | 
|  | if (fwnode_property_read_u32(child, prop_name, &nr)) | 
|  | continue; | 
|  |  | 
|  | if (val == nr) | 
|  | return child; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * acpi_graph_get_remote_endpoint - Parses and returns remote end of an endpoint | 
|  | * @fwnode: Endpoint firmware node pointing to a remote device | 
|  | * @endpoint: Firmware node of remote endpoint is filled here if not %NULL | 
|  | * | 
|  | * Returns the remote endpoint corresponding to @__fwnode. NULL on error. | 
|  | */ | 
|  | static struct fwnode_handle * | 
|  | acpi_graph_get_remote_endpoint(const struct fwnode_handle *__fwnode) | 
|  | { | 
|  | struct fwnode_handle *fwnode; | 
|  | unsigned int port_nr, endpoint_nr; | 
|  | struct fwnode_reference_args args; | 
|  | int ret; | 
|  |  | 
|  | memset(&args, 0, sizeof(args)); | 
|  | ret = acpi_node_get_property_reference(__fwnode, "remote-endpoint", 0, | 
|  | &args); | 
|  | if (ret) | 
|  | return NULL; | 
|  |  | 
|  | /* Direct endpoint reference? */ | 
|  | if (!is_acpi_device_node(args.fwnode)) | 
|  | return args.nargs ? NULL : args.fwnode; | 
|  |  | 
|  | /* | 
|  | * Always require two arguments with the reference: port and | 
|  | * endpoint indices. | 
|  | */ | 
|  | if (args.nargs != 2) | 
|  | return NULL; | 
|  |  | 
|  | fwnode = args.fwnode; | 
|  | port_nr = args.args[0]; | 
|  | endpoint_nr = args.args[1]; | 
|  |  | 
|  | fwnode = acpi_graph_get_child_prop_value(fwnode, "port", port_nr); | 
|  |  | 
|  | return acpi_graph_get_child_prop_value(fwnode, "endpoint", endpoint_nr); | 
|  | } | 
|  |  | 
|  | static bool acpi_fwnode_device_is_available(const struct fwnode_handle *fwnode) | 
|  | { | 
|  | if (!is_acpi_device_node(fwnode)) | 
|  | return false; | 
|  |  | 
|  | return acpi_device_is_present(to_acpi_device_node(fwnode)); | 
|  | } | 
|  |  | 
|  | static bool acpi_fwnode_property_present(const struct fwnode_handle *fwnode, | 
|  | const char *propname) | 
|  | { | 
|  | return !acpi_node_prop_get(fwnode, propname, NULL); | 
|  | } | 
|  |  | 
|  | static int | 
|  | acpi_fwnode_property_read_int_array(const struct fwnode_handle *fwnode, | 
|  | const char *propname, | 
|  | unsigned int elem_size, void *val, | 
|  | size_t nval) | 
|  | { | 
|  | enum dev_prop_type type; | 
|  |  | 
|  | switch (elem_size) { | 
|  | case sizeof(u8): | 
|  | type = DEV_PROP_U8; | 
|  | break; | 
|  | case sizeof(u16): | 
|  | type = DEV_PROP_U16; | 
|  | break; | 
|  | case sizeof(u32): | 
|  | type = DEV_PROP_U32; | 
|  | break; | 
|  | case sizeof(u64): | 
|  | type = DEV_PROP_U64; | 
|  | break; | 
|  | default: | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | return acpi_node_prop_read(fwnode, propname, type, val, nval); | 
|  | } | 
|  |  | 
|  | static int | 
|  | acpi_fwnode_property_read_string_array(const struct fwnode_handle *fwnode, | 
|  | const char *propname, const char **val, | 
|  | size_t nval) | 
|  | { | 
|  | return acpi_node_prop_read(fwnode, propname, DEV_PROP_STRING, | 
|  | val, nval); | 
|  | } | 
|  |  | 
|  | static int | 
|  | acpi_fwnode_get_reference_args(const struct fwnode_handle *fwnode, | 
|  | const char *prop, const char *nargs_prop, | 
|  | unsigned int args_count, unsigned int index, | 
|  | struct fwnode_reference_args *args) | 
|  | { | 
|  | return __acpi_node_get_property_reference(fwnode, prop, index, | 
|  | args_count, args); | 
|  | } | 
|  |  | 
|  | static struct fwnode_handle * | 
|  | acpi_fwnode_get_parent(struct fwnode_handle *fwnode) | 
|  | { | 
|  | return acpi_node_get_parent(fwnode); | 
|  | } | 
|  |  | 
|  | static int acpi_fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode, | 
|  | struct fwnode_endpoint *endpoint) | 
|  | { | 
|  | struct fwnode_handle *port_fwnode = fwnode_get_parent(fwnode); | 
|  |  | 
|  | endpoint->local_fwnode = fwnode; | 
|  |  | 
|  | if (fwnode_property_read_u32(port_fwnode, "reg", &endpoint->port)) | 
|  | fwnode_property_read_u32(port_fwnode, "port", &endpoint->port); | 
|  | if (fwnode_property_read_u32(fwnode, "reg", &endpoint->id)) | 
|  | fwnode_property_read_u32(fwnode, "endpoint", &endpoint->id); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const void * | 
|  | acpi_fwnode_device_get_match_data(const struct fwnode_handle *fwnode, | 
|  | const struct device *dev) | 
|  | { | 
|  | return acpi_device_get_match_data(dev); | 
|  | } | 
|  |  | 
|  | #define DECLARE_ACPI_FWNODE_OPS(ops) \ | 
|  | const struct fwnode_operations ops = {				\ | 
|  | .device_is_available = acpi_fwnode_device_is_available, \ | 
|  | .device_get_match_data = acpi_fwnode_device_get_match_data, \ | 
|  | .property_present = acpi_fwnode_property_present,	\ | 
|  | .property_read_int_array =				\ | 
|  | acpi_fwnode_property_read_int_array,		\ | 
|  | .property_read_string_array =				\ | 
|  | acpi_fwnode_property_read_string_array,		\ | 
|  | .get_parent = acpi_node_get_parent,			\ | 
|  | .get_next_child_node = acpi_get_next_subnode,		\ | 
|  | .get_named_child_node = acpi_fwnode_get_named_child_node, \ | 
|  | .get_reference_args = acpi_fwnode_get_reference_args,	\ | 
|  | .graph_get_next_endpoint =				\ | 
|  | acpi_graph_get_next_endpoint,			\ | 
|  | .graph_get_remote_endpoint =				\ | 
|  | acpi_graph_get_remote_endpoint,			\ | 
|  | .graph_get_port_parent = acpi_fwnode_get_parent,	\ | 
|  | .graph_parse_endpoint = acpi_fwnode_graph_parse_endpoint, \ | 
|  | };								\ | 
|  | EXPORT_SYMBOL_GPL(ops) | 
|  |  | 
|  | DECLARE_ACPI_FWNODE_OPS(acpi_device_fwnode_ops); | 
|  | DECLARE_ACPI_FWNODE_OPS(acpi_data_fwnode_ops); | 
|  | const struct fwnode_operations acpi_static_fwnode_ops; | 
|  |  | 
|  | bool is_acpi_device_node(const struct fwnode_handle *fwnode) | 
|  | { | 
|  | return !IS_ERR_OR_NULL(fwnode) && | 
|  | fwnode->ops == &acpi_device_fwnode_ops; | 
|  | } | 
|  | EXPORT_SYMBOL(is_acpi_device_node); | 
|  |  | 
|  | bool is_acpi_data_node(const struct fwnode_handle *fwnode) | 
|  | { | 
|  | return !IS_ERR_OR_NULL(fwnode) && fwnode->ops == &acpi_data_fwnode_ops; | 
|  | } | 
|  | EXPORT_SYMBOL(is_acpi_data_node); |