|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * drivers/extcon/extcon-adc-jack.c | 
|  | * | 
|  | * Analog Jack extcon driver with ADC-based detection capability. | 
|  | * | 
|  | * Copyright (C) 2016 Samsung Electronics | 
|  | * Chanwoo Choi <cw00.choi@samsung.com> | 
|  | * | 
|  | * Copyright (C) 2012 Samsung Electronics | 
|  | * MyungJoo Ham <myungjoo.ham@samsung.com> | 
|  | * | 
|  | * Modified for calling to IIO to get adc by <anish.singh@samsung.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/iio/consumer.h> | 
|  | #include <linux/extcon/extcon-adc-jack.h> | 
|  | #include <linux/extcon-provider.h> | 
|  |  | 
|  | /** | 
|  | * struct adc_jack_data - internal data for adc_jack device driver | 
|  | * @edev:		extcon device. | 
|  | * @cable_names:	list of supported cables. | 
|  | * @adc_conditions:	list of adc value conditions. | 
|  | * @num_conditions:	size of adc_conditions. | 
|  | * @irq:		irq number of attach/detach event (0 if not exist). | 
|  | * @handling_delay:	interrupt handler will schedule extcon event | 
|  | *			handling at handling_delay jiffies. | 
|  | * @handler:		extcon event handler called by interrupt handler. | 
|  | * @chan:		iio channel being queried. | 
|  | */ | 
|  | struct adc_jack_data { | 
|  | struct device *dev; | 
|  | struct extcon_dev *edev; | 
|  |  | 
|  | const unsigned int **cable_names; | 
|  | struct adc_jack_cond *adc_conditions; | 
|  | int num_conditions; | 
|  |  | 
|  | int irq; | 
|  | unsigned long handling_delay; /* in jiffies */ | 
|  | struct delayed_work handler; | 
|  |  | 
|  | struct iio_channel *chan; | 
|  | bool wakeup_source; | 
|  | }; | 
|  |  | 
|  | static void adc_jack_handler(struct work_struct *work) | 
|  | { | 
|  | struct adc_jack_data *data = container_of(to_delayed_work(work), | 
|  | struct adc_jack_data, | 
|  | handler); | 
|  | struct adc_jack_cond *def; | 
|  | int ret, adc_val; | 
|  | int i; | 
|  |  | 
|  | ret = iio_read_channel_raw(data->chan, &adc_val); | 
|  | if (ret < 0) { | 
|  | dev_err(data->dev, "read channel() error: %d\n", ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Get state from adc value with adc_conditions */ | 
|  | for (i = 0; i < data->num_conditions; i++) { | 
|  | def = &data->adc_conditions[i]; | 
|  | if (def->min_adc <= adc_val && def->max_adc >= adc_val) { | 
|  | extcon_set_state_sync(data->edev, def->id, true); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Set the detached state if adc value is not included in the range */ | 
|  | for (i = 0; i < data->num_conditions; i++) { | 
|  | def = &data->adc_conditions[i]; | 
|  | extcon_set_state_sync(data->edev, def->id, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | static irqreturn_t adc_jack_irq_thread(int irq, void *_data) | 
|  | { | 
|  | struct adc_jack_data *data = _data; | 
|  |  | 
|  | queue_delayed_work(system_power_efficient_wq, | 
|  | &data->handler, data->handling_delay); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int adc_jack_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct adc_jack_data *data; | 
|  | struct adc_jack_pdata *pdata = dev_get_platdata(&pdev->dev); | 
|  | int i, err = 0; | 
|  |  | 
|  | data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (!pdata->cable_names) { | 
|  | dev_err(&pdev->dev, "error: cable_names not defined.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | data->dev = &pdev->dev; | 
|  | data->edev = devm_extcon_dev_allocate(&pdev->dev, pdata->cable_names); | 
|  | if (IS_ERR(data->edev)) { | 
|  | dev_err(&pdev->dev, "failed to allocate extcon device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (!pdata->adc_conditions) { | 
|  | dev_err(&pdev->dev, "error: adc_conditions not defined.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | data->adc_conditions = pdata->adc_conditions; | 
|  |  | 
|  | /* Check the length of array and set num_conditions */ | 
|  | for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++); | 
|  | data->num_conditions = i; | 
|  |  | 
|  | data->chan = devm_iio_channel_get(&pdev->dev, pdata->consumer_channel); | 
|  | if (IS_ERR(data->chan)) | 
|  | return PTR_ERR(data->chan); | 
|  |  | 
|  | data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms); | 
|  | data->wakeup_source = pdata->wakeup_source; | 
|  |  | 
|  | INIT_DEFERRABLE_WORK(&data->handler, adc_jack_handler); | 
|  |  | 
|  | platform_set_drvdata(pdev, data); | 
|  |  | 
|  | err = devm_extcon_dev_register(&pdev->dev, data->edev); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | data->irq = platform_get_irq(pdev, 0); | 
|  | if (data->irq < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | err = request_any_context_irq(data->irq, adc_jack_irq_thread, | 
|  | pdata->irq_flags, pdata->name, data); | 
|  |  | 
|  | if (err < 0) { | 
|  | dev_err(&pdev->dev, "error: irq %d\n", data->irq); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (data->wakeup_source) | 
|  | device_init_wakeup(&pdev->dev, 1); | 
|  |  | 
|  | adc_jack_handler(&data->handler.work); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int adc_jack_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct adc_jack_data *data = platform_get_drvdata(pdev); | 
|  |  | 
|  | free_irq(data->irq, data); | 
|  | cancel_work_sync(&data->handler.work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int adc_jack_suspend(struct device *dev) | 
|  | { | 
|  | struct adc_jack_data *data = dev_get_drvdata(dev); | 
|  |  | 
|  | cancel_delayed_work_sync(&data->handler); | 
|  | if (device_may_wakeup(data->dev)) | 
|  | enable_irq_wake(data->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int adc_jack_resume(struct device *dev) | 
|  | { | 
|  | struct adc_jack_data *data = dev_get_drvdata(dev); | 
|  |  | 
|  | if (device_may_wakeup(data->dev)) | 
|  | disable_irq_wake(data->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_PM_SLEEP */ | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(adc_jack_pm_ops, | 
|  | adc_jack_suspend, adc_jack_resume); | 
|  |  | 
|  | static struct platform_driver adc_jack_driver = { | 
|  | .probe          = adc_jack_probe, | 
|  | .remove         = adc_jack_remove, | 
|  | .driver         = { | 
|  | .name   = "adc-jack", | 
|  | .pm = &adc_jack_pm_ops, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(adc_jack_driver); | 
|  |  | 
|  | MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); | 
|  | MODULE_DESCRIPTION("ADC Jack extcon driver"); | 
|  | MODULE_LICENSE("GPL v2"); |