|  | What:		/sys/block/etherd*/mac | 
|  | Date:		Apr, 2005 | 
|  | KernelVersion:	v2.6.12 | 
|  | Contact:	Ed L. Cashin <ed.cashin@acm.org> | 
|  | Description: | 
|  | (RO) The ethernet address of the remote Ata over Ethernet (AoE) | 
|  | device. | 
|  |  | 
|  | What:		/sys/block/etherd*/netif | 
|  | Date:		Apr, 2005 | 
|  | KernelVersion:	v2.6.12 | 
|  | Contact:	Ed L. Cashin <ed.cashin@acm.org> | 
|  | Description: | 
|  | (RO) The names of the network interfaces on the localhost (comma | 
|  | separated) through which we are communicating with the remote | 
|  | AoE device. | 
|  |  | 
|  | What:		/sys/block/etherd*/state | 
|  | Date:		Apr, 2005 | 
|  | KernelVersion:	v2.6.12 | 
|  | Contact:	Ed L. Cashin <ed.cashin@acm.org> | 
|  | Description: | 
|  | (RO) Device status. The state attribute is "up" when the device | 
|  | is ready for I/O and "down" if detected but unusable. The | 
|  | "down,closewait" state shows that the device is still open and | 
|  | cannot come up again until it has been closed.  The "up,kickme" | 
|  | state means that the driver wants to send more commands to the | 
|  | target but found out there were already the max number of | 
|  | commands waiting for a response. It will retry again after being | 
|  | kicked by the periodic timer handler routine. | 
|  |  | 
|  | What:		/sys/block/etherd*/firmware-version | 
|  | Date:		Apr, 2005 | 
|  | KernelVersion:	v2.6.12 | 
|  | Contact:	Ed L. Cashin <ed.cashin@acm.org> | 
|  | Description: | 
|  | (RO) Version of the firmware in the target. | 
|  |  | 
|  | What:		/sys/block/etherd*/payload | 
|  | Date:		Dec, 2012 | 
|  | KernelVersion:	v3.10 | 
|  | Contact:	Ed L. Cashin <ed.cashin@acm.org> | 
|  | Description: | 
|  | (RO) The amount of user data transferred (in bytes) inside each AoE | 
|  | command on the network, network headers excluded. |