|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * cfg80211 scan result handling | 
|  | * | 
|  | * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2013-2014  Intel Mobile Communications GmbH | 
|  | * Copyright 2016	Intel Deutschland GmbH | 
|  | * Copyright (C) 2018-2023 Intel Corporation | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <linux/nl80211.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <linux/bitfield.h> | 
|  | #include <net/arp.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include <net/cfg80211-wext.h> | 
|  | #include <net/iw_handler.h> | 
|  | #include "core.h" | 
|  | #include "nl80211.h" | 
|  | #include "wext-compat.h" | 
|  | #include "rdev-ops.h" | 
|  |  | 
|  | /** | 
|  | * DOC: BSS tree/list structure | 
|  | * | 
|  | * At the top level, the BSS list is kept in both a list in each | 
|  | * registered device (@bss_list) as well as an RB-tree for faster | 
|  | * lookup. In the RB-tree, entries can be looked up using their | 
|  | * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID | 
|  | * for other BSSes. | 
|  | * | 
|  | * Due to the possibility of hidden SSIDs, there's a second level | 
|  | * structure, the "hidden_list" and "hidden_beacon_bss" pointer. | 
|  | * The hidden_list connects all BSSes belonging to a single AP | 
|  | * that has a hidden SSID, and connects beacon and probe response | 
|  | * entries. For a probe response entry for a hidden SSID, the | 
|  | * hidden_beacon_bss pointer points to the BSS struct holding the | 
|  | * beacon's information. | 
|  | * | 
|  | * Reference counting is done for all these references except for | 
|  | * the hidden_list, so that a beacon BSS struct that is otherwise | 
|  | * not referenced has one reference for being on the bss_list and | 
|  | * one for each probe response entry that points to it using the | 
|  | * hidden_beacon_bss pointer. When a BSS struct that has such a | 
|  | * pointer is get/put, the refcount update is also propagated to | 
|  | * the referenced struct, this ensure that it cannot get removed | 
|  | * while somebody is using the probe response version. | 
|  | * | 
|  | * Note that the hidden_beacon_bss pointer never changes, due to | 
|  | * the reference counting. Therefore, no locking is needed for | 
|  | * it. | 
|  | * | 
|  | * Also note that the hidden_beacon_bss pointer is only relevant | 
|  | * if the driver uses something other than the IEs, e.g. private | 
|  | * data stored in the BSS struct, since the beacon IEs are | 
|  | * also linked into the probe response struct. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Limit the number of BSS entries stored in mac80211. Each one is | 
|  | * a bit over 4k at most, so this limits to roughly 4-5M of memory. | 
|  | * If somebody wants to really attack this though, they'd likely | 
|  | * use small beacons, and only one type of frame, limiting each of | 
|  | * the entries to a much smaller size (in order to generate more | 
|  | * entries in total, so overhead is bigger.) | 
|  | */ | 
|  | static int bss_entries_limit = 1000; | 
|  | module_param(bss_entries_limit, int, 0644); | 
|  | MODULE_PARM_DESC(bss_entries_limit, | 
|  | "limit to number of scan BSS entries (per wiphy, default 1000)"); | 
|  |  | 
|  | #define IEEE80211_SCAN_RESULT_EXPIRE	(30 * HZ) | 
|  |  | 
|  | /** | 
|  | * struct cfg80211_colocated_ap - colocated AP information | 
|  | * | 
|  | * @list: linked list to all colocated aPS | 
|  | * @bssid: BSSID of the reported AP | 
|  | * @ssid: SSID of the reported AP | 
|  | * @ssid_len: length of the ssid | 
|  | * @center_freq: frequency the reported AP is on | 
|  | * @unsolicited_probe: the reported AP is part of an ESS, where all the APs | 
|  | *	that operate in the same channel as the reported AP and that might be | 
|  | *	detected by a STA receiving this frame, are transmitting unsolicited | 
|  | *	Probe Response frames every 20 TUs | 
|  | * @oct_recommended: OCT is recommended to exchange MMPDUs with the reported AP | 
|  | * @same_ssid: the reported AP has the same SSID as the reporting AP | 
|  | * @multi_bss: the reported AP is part of a multiple BSSID set | 
|  | * @transmitted_bssid: the reported AP is the transmitting BSSID | 
|  | * @colocated_ess: all the APs that share the same ESS as the reported AP are | 
|  | *	colocated and can be discovered via legacy bands. | 
|  | * @short_ssid_valid: short_ssid is valid and can be used | 
|  | * @short_ssid: the short SSID for this SSID | 
|  | */ | 
|  | struct cfg80211_colocated_ap { | 
|  | struct list_head list; | 
|  | u8 bssid[ETH_ALEN]; | 
|  | u8 ssid[IEEE80211_MAX_SSID_LEN]; | 
|  | size_t ssid_len; | 
|  | u32 short_ssid; | 
|  | u32 center_freq; | 
|  | u8 unsolicited_probe:1, | 
|  | oct_recommended:1, | 
|  | same_ssid:1, | 
|  | multi_bss:1, | 
|  | transmitted_bssid:1, | 
|  | colocated_ess:1, | 
|  | short_ssid_valid:1; | 
|  | }; | 
|  |  | 
|  | static void bss_free(struct cfg80211_internal_bss *bss) | 
|  | { | 
|  | struct cfg80211_bss_ies *ies; | 
|  |  | 
|  | if (WARN_ON(atomic_read(&bss->hold))) | 
|  | return; | 
|  |  | 
|  | ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); | 
|  | if (ies && !bss->pub.hidden_beacon_bss) | 
|  | kfree_rcu(ies, rcu_head); | 
|  | ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); | 
|  | if (ies) | 
|  | kfree_rcu(ies, rcu_head); | 
|  |  | 
|  | /* | 
|  | * This happens when the module is removed, it doesn't | 
|  | * really matter any more save for completeness | 
|  | */ | 
|  | if (!list_empty(&bss->hidden_list)) | 
|  | list_del(&bss->hidden_list); | 
|  |  | 
|  | kfree(bss); | 
|  | } | 
|  |  | 
|  | static inline void bss_ref_get(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *bss) | 
|  | { | 
|  | lockdep_assert_held(&rdev->bss_lock); | 
|  |  | 
|  | bss->refcount++; | 
|  |  | 
|  | if (bss->pub.hidden_beacon_bss) | 
|  | bss_from_pub(bss->pub.hidden_beacon_bss)->refcount++; | 
|  |  | 
|  | if (bss->pub.transmitted_bss) | 
|  | bss_from_pub(bss->pub.transmitted_bss)->refcount++; | 
|  | } | 
|  |  | 
|  | static inline void bss_ref_put(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *bss) | 
|  | { | 
|  | lockdep_assert_held(&rdev->bss_lock); | 
|  |  | 
|  | if (bss->pub.hidden_beacon_bss) { | 
|  | struct cfg80211_internal_bss *hbss; | 
|  | hbss = container_of(bss->pub.hidden_beacon_bss, | 
|  | struct cfg80211_internal_bss, | 
|  | pub); | 
|  | hbss->refcount--; | 
|  | if (hbss->refcount == 0) | 
|  | bss_free(hbss); | 
|  | } | 
|  |  | 
|  | if (bss->pub.transmitted_bss) { | 
|  | struct cfg80211_internal_bss *tbss; | 
|  |  | 
|  | tbss = container_of(bss->pub.transmitted_bss, | 
|  | struct cfg80211_internal_bss, | 
|  | pub); | 
|  | tbss->refcount--; | 
|  | if (tbss->refcount == 0) | 
|  | bss_free(tbss); | 
|  | } | 
|  |  | 
|  | bss->refcount--; | 
|  | if (bss->refcount == 0) | 
|  | bss_free(bss); | 
|  | } | 
|  |  | 
|  | static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *bss) | 
|  | { | 
|  | lockdep_assert_held(&rdev->bss_lock); | 
|  |  | 
|  | if (!list_empty(&bss->hidden_list)) { | 
|  | /* | 
|  | * don't remove the beacon entry if it has | 
|  | * probe responses associated with it | 
|  | */ | 
|  | if (!bss->pub.hidden_beacon_bss) | 
|  | return false; | 
|  | /* | 
|  | * if it's a probe response entry break its | 
|  | * link to the other entries in the group | 
|  | */ | 
|  | list_del_init(&bss->hidden_list); | 
|  | } | 
|  |  | 
|  | list_del_init(&bss->list); | 
|  | list_del_init(&bss->pub.nontrans_list); | 
|  | rb_erase(&bss->rbn, &rdev->bss_tree); | 
|  | rdev->bss_entries--; | 
|  | WARN_ONCE((rdev->bss_entries == 0) ^ list_empty(&rdev->bss_list), | 
|  | "rdev bss entries[%d]/list[empty:%d] corruption\n", | 
|  | rdev->bss_entries, list_empty(&rdev->bss_list)); | 
|  | bss_ref_put(rdev, bss); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool cfg80211_is_element_inherited(const struct element *elem, | 
|  | const struct element *non_inherit_elem) | 
|  | { | 
|  | u8 id_len, ext_id_len, i, loop_len, id; | 
|  | const u8 *list; | 
|  |  | 
|  | if (elem->id == WLAN_EID_MULTIPLE_BSSID) | 
|  | return false; | 
|  |  | 
|  | if (!non_inherit_elem || non_inherit_elem->datalen < 2) | 
|  | return true; | 
|  |  | 
|  | /* | 
|  | * non inheritance element format is: | 
|  | * ext ID (56) | IDs list len | list | extension IDs list len | list | 
|  | * Both lists are optional. Both lengths are mandatory. | 
|  | * This means valid length is: | 
|  | * elem_len = 1 (extension ID) + 2 (list len fields) + list lengths | 
|  | */ | 
|  | id_len = non_inherit_elem->data[1]; | 
|  | if (non_inherit_elem->datalen < 3 + id_len) | 
|  | return true; | 
|  |  | 
|  | ext_id_len = non_inherit_elem->data[2 + id_len]; | 
|  | if (non_inherit_elem->datalen < 3 + id_len + ext_id_len) | 
|  | return true; | 
|  |  | 
|  | if (elem->id == WLAN_EID_EXTENSION) { | 
|  | if (!ext_id_len) | 
|  | return true; | 
|  | loop_len = ext_id_len; | 
|  | list = &non_inherit_elem->data[3 + id_len]; | 
|  | id = elem->data[0]; | 
|  | } else { | 
|  | if (!id_len) | 
|  | return true; | 
|  | loop_len = id_len; | 
|  | list = &non_inherit_elem->data[2]; | 
|  | id = elem->id; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < loop_len; i++) { | 
|  | if (list[i] == id) | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_is_element_inherited); | 
|  |  | 
|  | static size_t cfg80211_copy_elem_with_frags(const struct element *elem, | 
|  | const u8 *ie, size_t ie_len, | 
|  | u8 **pos, u8 *buf, size_t buf_len) | 
|  | { | 
|  | if (WARN_ON((u8 *)elem < ie || elem->data > ie + ie_len || | 
|  | elem->data + elem->datalen > ie + ie_len)) | 
|  | return 0; | 
|  |  | 
|  | if (elem->datalen + 2 > buf + buf_len - *pos) | 
|  | return 0; | 
|  |  | 
|  | memcpy(*pos, elem, elem->datalen + 2); | 
|  | *pos += elem->datalen + 2; | 
|  |  | 
|  | /* Finish if it is not fragmented  */ | 
|  | if (elem->datalen != 255) | 
|  | return *pos - buf; | 
|  |  | 
|  | ie_len = ie + ie_len - elem->data - elem->datalen; | 
|  | ie = (const u8 *)elem->data + elem->datalen; | 
|  |  | 
|  | for_each_element(elem, ie, ie_len) { | 
|  | if (elem->id != WLAN_EID_FRAGMENT) | 
|  | break; | 
|  |  | 
|  | if (elem->datalen + 2 > buf + buf_len - *pos) | 
|  | return 0; | 
|  |  | 
|  | memcpy(*pos, elem, elem->datalen + 2); | 
|  | *pos += elem->datalen + 2; | 
|  |  | 
|  | if (elem->datalen != 255) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return *pos - buf; | 
|  | } | 
|  |  | 
|  | static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, | 
|  | const u8 *subie, size_t subie_len, | 
|  | u8 *new_ie, size_t new_ie_len) | 
|  | { | 
|  | const struct element *non_inherit_elem, *parent, *sub; | 
|  | u8 *pos = new_ie; | 
|  | u8 id, ext_id; | 
|  | unsigned int match_len; | 
|  |  | 
|  | non_inherit_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, | 
|  | subie, subie_len); | 
|  |  | 
|  | /* We copy the elements one by one from the parent to the generated | 
|  | * elements. | 
|  | * If they are not inherited (included in subie or in the non | 
|  | * inheritance element), then we copy all occurrences the first time | 
|  | * we see this element type. | 
|  | */ | 
|  | for_each_element(parent, ie, ielen) { | 
|  | if (parent->id == WLAN_EID_FRAGMENT) | 
|  | continue; | 
|  |  | 
|  | if (parent->id == WLAN_EID_EXTENSION) { | 
|  | if (parent->datalen < 1) | 
|  | continue; | 
|  |  | 
|  | id = WLAN_EID_EXTENSION; | 
|  | ext_id = parent->data[0]; | 
|  | match_len = 1; | 
|  | } else { | 
|  | id = parent->id; | 
|  | match_len = 0; | 
|  | } | 
|  |  | 
|  | /* Find first occurrence in subie */ | 
|  | sub = cfg80211_find_elem_match(id, subie, subie_len, | 
|  | &ext_id, match_len, 0); | 
|  |  | 
|  | /* Copy from parent if not in subie and inherited */ | 
|  | if (!sub && | 
|  | cfg80211_is_element_inherited(parent, non_inherit_elem)) { | 
|  | if (!cfg80211_copy_elem_with_frags(parent, | 
|  | ie, ielen, | 
|  | &pos, new_ie, | 
|  | new_ie_len)) | 
|  | return 0; | 
|  |  | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Already copied if an earlier element had the same type */ | 
|  | if (cfg80211_find_elem_match(id, ie, (u8 *)parent - ie, | 
|  | &ext_id, match_len, 0)) | 
|  | continue; | 
|  |  | 
|  | /* Not inheriting, copy all similar elements from subie */ | 
|  | while (sub) { | 
|  | if (!cfg80211_copy_elem_with_frags(sub, | 
|  | subie, subie_len, | 
|  | &pos, new_ie, | 
|  | new_ie_len)) | 
|  | return 0; | 
|  |  | 
|  | sub = cfg80211_find_elem_match(id, | 
|  | sub->data + sub->datalen, | 
|  | subie_len + subie - | 
|  | (sub->data + | 
|  | sub->datalen), | 
|  | &ext_id, match_len, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* The above misses elements that are included in subie but not in the | 
|  | * parent, so do a pass over subie and append those. | 
|  | * Skip the non-tx BSSID caps and non-inheritance element. | 
|  | */ | 
|  | for_each_element(sub, subie, subie_len) { | 
|  | if (sub->id == WLAN_EID_NON_TX_BSSID_CAP) | 
|  | continue; | 
|  |  | 
|  | if (sub->id == WLAN_EID_FRAGMENT) | 
|  | continue; | 
|  |  | 
|  | if (sub->id == WLAN_EID_EXTENSION) { | 
|  | if (sub->datalen < 1) | 
|  | continue; | 
|  |  | 
|  | id = WLAN_EID_EXTENSION; | 
|  | ext_id = sub->data[0]; | 
|  | match_len = 1; | 
|  |  | 
|  | if (ext_id == WLAN_EID_EXT_NON_INHERITANCE) | 
|  | continue; | 
|  | } else { | 
|  | id = sub->id; | 
|  | match_len = 0; | 
|  | } | 
|  |  | 
|  | /* Processed if one was included in the parent */ | 
|  | if (cfg80211_find_elem_match(id, ie, ielen, | 
|  | &ext_id, match_len, 0)) | 
|  | continue; | 
|  |  | 
|  | if (!cfg80211_copy_elem_with_frags(sub, subie, subie_len, | 
|  | &pos, new_ie, new_ie_len)) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return pos - new_ie; | 
|  | } | 
|  |  | 
|  | static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, | 
|  | const u8 *ssid, size_t ssid_len) | 
|  | { | 
|  | const struct cfg80211_bss_ies *ies; | 
|  | const struct element *ssid_elem; | 
|  |  | 
|  | if (bssid && !ether_addr_equal(a->bssid, bssid)) | 
|  | return false; | 
|  |  | 
|  | if (!ssid) | 
|  | return true; | 
|  |  | 
|  | ies = rcu_access_pointer(a->ies); | 
|  | if (!ies) | 
|  | return false; | 
|  | ssid_elem = cfg80211_find_elem(WLAN_EID_SSID, ies->data, ies->len); | 
|  | if (!ssid_elem) | 
|  | return false; | 
|  | if (ssid_elem->datalen != ssid_len) | 
|  | return false; | 
|  | return memcmp(ssid_elem->data, ssid, ssid_len) == 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | cfg80211_add_nontrans_list(struct cfg80211_bss *trans_bss, | 
|  | struct cfg80211_bss *nontrans_bss) | 
|  | { | 
|  | const struct element *ssid_elem; | 
|  | struct cfg80211_bss *bss = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | ssid_elem = ieee80211_bss_get_elem(nontrans_bss, WLAN_EID_SSID); | 
|  | if (!ssid_elem) { | 
|  | rcu_read_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* check if nontrans_bss is in the list */ | 
|  | list_for_each_entry(bss, &trans_bss->nontrans_list, nontrans_list) { | 
|  | if (is_bss(bss, nontrans_bss->bssid, ssid_elem->data, | 
|  | ssid_elem->datalen)) { | 
|  | rcu_read_unlock(); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | /* | 
|  | * This is a bit weird - it's not on the list, but already on another | 
|  | * one! The only way that could happen is if there's some BSSID/SSID | 
|  | * shared by multiple APs in their multi-BSSID profiles, potentially | 
|  | * with hidden SSID mixed in ... ignore it. | 
|  | */ | 
|  | if (!list_empty(&nontrans_bss->nontrans_list)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* add to the list */ | 
|  | list_add_tail(&nontrans_bss->nontrans_list, &trans_bss->nontrans_list); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __cfg80211_bss_expire(struct cfg80211_registered_device *rdev, | 
|  | unsigned long expire_time) | 
|  | { | 
|  | struct cfg80211_internal_bss *bss, *tmp; | 
|  | bool expired = false; | 
|  |  | 
|  | lockdep_assert_held(&rdev->bss_lock); | 
|  |  | 
|  | list_for_each_entry_safe(bss, tmp, &rdev->bss_list, list) { | 
|  | if (atomic_read(&bss->hold)) | 
|  | continue; | 
|  | if (!time_after(expire_time, bss->ts)) | 
|  | continue; | 
|  |  | 
|  | if (__cfg80211_unlink_bss(rdev, bss)) | 
|  | expired = true; | 
|  | } | 
|  |  | 
|  | if (expired) | 
|  | rdev->bss_generation++; | 
|  | } | 
|  |  | 
|  | static bool cfg80211_bss_expire_oldest(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct cfg80211_internal_bss *bss, *oldest = NULL; | 
|  | bool ret; | 
|  |  | 
|  | lockdep_assert_held(&rdev->bss_lock); | 
|  |  | 
|  | list_for_each_entry(bss, &rdev->bss_list, list) { | 
|  | if (atomic_read(&bss->hold)) | 
|  | continue; | 
|  |  | 
|  | if (!list_empty(&bss->hidden_list) && | 
|  | !bss->pub.hidden_beacon_bss) | 
|  | continue; | 
|  |  | 
|  | if (oldest && time_before(oldest->ts, bss->ts)) | 
|  | continue; | 
|  | oldest = bss; | 
|  | } | 
|  |  | 
|  | if (WARN_ON(!oldest)) | 
|  | return false; | 
|  |  | 
|  | /* | 
|  | * The callers make sure to increase rdev->bss_generation if anything | 
|  | * gets removed (and a new entry added), so there's no need to also do | 
|  | * it here. | 
|  | */ | 
|  |  | 
|  | ret = __cfg80211_unlink_bss(rdev, oldest); | 
|  | WARN_ON(!ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static u8 cfg80211_parse_bss_param(u8 data, | 
|  | struct cfg80211_colocated_ap *coloc_ap) | 
|  | { | 
|  | coloc_ap->oct_recommended = | 
|  | u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_OCT_RECOMMENDED); | 
|  | coloc_ap->same_ssid = | 
|  | u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_SAME_SSID); | 
|  | coloc_ap->multi_bss = | 
|  | u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID); | 
|  | coloc_ap->transmitted_bssid = | 
|  | u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID); | 
|  | coloc_ap->unsolicited_probe = | 
|  | u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE); | 
|  | coloc_ap->colocated_ess = | 
|  | u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_COLOC_ESS); | 
|  |  | 
|  | return u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_COLOC_AP); | 
|  | } | 
|  |  | 
|  | static int cfg80211_calc_short_ssid(const struct cfg80211_bss_ies *ies, | 
|  | const struct element **elem, u32 *s_ssid) | 
|  | { | 
|  |  | 
|  | *elem = cfg80211_find_elem(WLAN_EID_SSID, ies->data, ies->len); | 
|  | if (!*elem || (*elem)->datalen > IEEE80211_MAX_SSID_LEN) | 
|  | return -EINVAL; | 
|  |  | 
|  | *s_ssid = ~crc32_le(~0, (*elem)->data, (*elem)->datalen); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void cfg80211_free_coloc_ap_list(struct list_head *coloc_ap_list) | 
|  | { | 
|  | struct cfg80211_colocated_ap *ap, *tmp_ap; | 
|  |  | 
|  | list_for_each_entry_safe(ap, tmp_ap, coloc_ap_list, list) { | 
|  | list_del(&ap->list); | 
|  | kfree(ap); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int cfg80211_parse_ap_info(struct cfg80211_colocated_ap *entry, | 
|  | const u8 *pos, u8 length, | 
|  | const struct element *ssid_elem, | 
|  | int s_ssid_tmp) | 
|  | { | 
|  | /* skip the TBTT offset */ | 
|  | pos++; | 
|  |  | 
|  | /* ignore entries with invalid BSSID */ | 
|  | if (!is_valid_ether_addr(pos)) | 
|  | return -EINVAL; | 
|  |  | 
|  | memcpy(entry->bssid, pos, ETH_ALEN); | 
|  | pos += ETH_ALEN; | 
|  |  | 
|  | if (length >= IEEE80211_TBTT_INFO_OFFSET_BSSID_SSSID_BSS_PARAM) { | 
|  | memcpy(&entry->short_ssid, pos, | 
|  | sizeof(entry->short_ssid)); | 
|  | entry->short_ssid_valid = true; | 
|  | pos += 4; | 
|  | } | 
|  |  | 
|  | /* skip non colocated APs */ | 
|  | if (!cfg80211_parse_bss_param(*pos, entry)) | 
|  | return -EINVAL; | 
|  | pos++; | 
|  |  | 
|  | if (length == IEEE80211_TBTT_INFO_OFFSET_BSSID_BSS_PARAM) { | 
|  | /* | 
|  | * no information about the short ssid. Consider the entry valid | 
|  | * for now. It would later be dropped in case there are explicit | 
|  | * SSIDs that need to be matched | 
|  | */ | 
|  | if (!entry->same_ssid) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (entry->same_ssid) { | 
|  | entry->short_ssid = s_ssid_tmp; | 
|  | entry->short_ssid_valid = true; | 
|  |  | 
|  | /* | 
|  | * This is safe because we validate datalen in | 
|  | * cfg80211_parse_colocated_ap(), before calling this | 
|  | * function. | 
|  | */ | 
|  | memcpy(&entry->ssid, &ssid_elem->data, | 
|  | ssid_elem->datalen); | 
|  | entry->ssid_len = ssid_elem->datalen; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cfg80211_parse_colocated_ap(const struct cfg80211_bss_ies *ies, | 
|  | struct list_head *list) | 
|  | { | 
|  | struct ieee80211_neighbor_ap_info *ap_info; | 
|  | const struct element *elem, *ssid_elem; | 
|  | const u8 *pos, *end; | 
|  | u32 s_ssid_tmp; | 
|  | int n_coloc = 0, ret; | 
|  | LIST_HEAD(ap_list); | 
|  |  | 
|  | elem = cfg80211_find_elem(WLAN_EID_REDUCED_NEIGHBOR_REPORT, ies->data, | 
|  | ies->len); | 
|  | if (!elem) | 
|  | return 0; | 
|  |  | 
|  | pos = elem->data; | 
|  | end = pos + elem->datalen; | 
|  |  | 
|  | ret = cfg80211_calc_short_ssid(ies, &ssid_elem, &s_ssid_tmp); | 
|  | if (ret) | 
|  | return 0; | 
|  |  | 
|  | /* RNR IE may contain more than one NEIGHBOR_AP_INFO */ | 
|  | while (pos + sizeof(*ap_info) <= end) { | 
|  | enum nl80211_band band; | 
|  | int freq; | 
|  | u8 length, i, count; | 
|  |  | 
|  | ap_info = (void *)pos; | 
|  | count = u8_get_bits(ap_info->tbtt_info_hdr, | 
|  | IEEE80211_AP_INFO_TBTT_HDR_COUNT) + 1; | 
|  | length = ap_info->tbtt_info_len; | 
|  |  | 
|  | pos += sizeof(*ap_info); | 
|  |  | 
|  | if (!ieee80211_operating_class_to_band(ap_info->op_class, | 
|  | &band)) | 
|  | break; | 
|  |  | 
|  | freq = ieee80211_channel_to_frequency(ap_info->channel, band); | 
|  |  | 
|  | if (end - pos < count * length) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * TBTT info must include bss param + BSSID + | 
|  | * (short SSID or same_ssid bit to be set). | 
|  | * ignore other options, and move to the | 
|  | * next AP info | 
|  | */ | 
|  | if (band != NL80211_BAND_6GHZ || | 
|  | (length != IEEE80211_TBTT_INFO_OFFSET_BSSID_BSS_PARAM && | 
|  | length < IEEE80211_TBTT_INFO_OFFSET_BSSID_SSSID_BSS_PARAM)) { | 
|  | pos += count * length; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  | struct cfg80211_colocated_ap *entry; | 
|  |  | 
|  | entry = kzalloc(sizeof(*entry) + IEEE80211_MAX_SSID_LEN, | 
|  | GFP_ATOMIC); | 
|  |  | 
|  | if (!entry) | 
|  | break; | 
|  |  | 
|  | entry->center_freq = freq; | 
|  |  | 
|  | if (!cfg80211_parse_ap_info(entry, pos, length, | 
|  | ssid_elem, s_ssid_tmp)) { | 
|  | n_coloc++; | 
|  | list_add_tail(&entry->list, &ap_list); | 
|  | } else { | 
|  | kfree(entry); | 
|  | } | 
|  |  | 
|  | pos += length; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (pos != end) { | 
|  | cfg80211_free_coloc_ap_list(&ap_list); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | list_splice_tail(&ap_list, list); | 
|  | return n_coloc; | 
|  | } | 
|  |  | 
|  | static  void cfg80211_scan_req_add_chan(struct cfg80211_scan_request *request, | 
|  | struct ieee80211_channel *chan, | 
|  | bool add_to_6ghz) | 
|  | { | 
|  | int i; | 
|  | u32 n_channels = request->n_channels; | 
|  | struct cfg80211_scan_6ghz_params *params = | 
|  | &request->scan_6ghz_params[request->n_6ghz_params]; | 
|  |  | 
|  | for (i = 0; i < n_channels; i++) { | 
|  | if (request->channels[i] == chan) { | 
|  | if (add_to_6ghz) | 
|  | params->channel_idx = i; | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | request->channels[n_channels] = chan; | 
|  | if (add_to_6ghz) | 
|  | request->scan_6ghz_params[request->n_6ghz_params].channel_idx = | 
|  | n_channels; | 
|  |  | 
|  | request->n_channels++; | 
|  | } | 
|  |  | 
|  | static bool cfg80211_find_ssid_match(struct cfg80211_colocated_ap *ap, | 
|  | struct cfg80211_scan_request *request) | 
|  | { | 
|  | int i; | 
|  | u32 s_ssid; | 
|  |  | 
|  | for (i = 0; i < request->n_ssids; i++) { | 
|  | /* wildcard ssid in the scan request */ | 
|  | if (!request->ssids[i].ssid_len) { | 
|  | if (ap->multi_bss && !ap->transmitted_bssid) | 
|  | continue; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (ap->ssid_len && | 
|  | ap->ssid_len == request->ssids[i].ssid_len) { | 
|  | if (!memcmp(request->ssids[i].ssid, ap->ssid, | 
|  | ap->ssid_len)) | 
|  | return true; | 
|  | } else if (ap->short_ssid_valid) { | 
|  | s_ssid = ~crc32_le(~0, request->ssids[i].ssid, | 
|  | request->ssids[i].ssid_len); | 
|  |  | 
|  | if (ap->short_ssid == s_ssid) | 
|  | return true; | 
|  | } | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | u8 i; | 
|  | struct cfg80211_colocated_ap *ap; | 
|  | int n_channels, count = 0, err; | 
|  | struct cfg80211_scan_request *request, *rdev_req = rdev->scan_req; | 
|  | LIST_HEAD(coloc_ap_list); | 
|  | bool need_scan_psc = true; | 
|  | const struct ieee80211_sband_iftype_data *iftd; | 
|  |  | 
|  | rdev_req->scan_6ghz = true; | 
|  |  | 
|  | if (!rdev->wiphy.bands[NL80211_BAND_6GHZ]) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | iftd = ieee80211_get_sband_iftype_data(rdev->wiphy.bands[NL80211_BAND_6GHZ], | 
|  | rdev_req->wdev->iftype); | 
|  | if (!iftd || !iftd->he_cap.has_he) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | n_channels = rdev->wiphy.bands[NL80211_BAND_6GHZ]->n_channels; | 
|  |  | 
|  | if (rdev_req->flags & NL80211_SCAN_FLAG_COLOCATED_6GHZ) { | 
|  | struct cfg80211_internal_bss *intbss; | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | list_for_each_entry(intbss, &rdev->bss_list, list) { | 
|  | struct cfg80211_bss *res = &intbss->pub; | 
|  | const struct cfg80211_bss_ies *ies; | 
|  |  | 
|  | ies = rcu_access_pointer(res->ies); | 
|  | count += cfg80211_parse_colocated_ap(ies, | 
|  | &coloc_ap_list); | 
|  | } | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  |  | 
|  | request = kzalloc(struct_size(request, channels, n_channels) + | 
|  | sizeof(*request->scan_6ghz_params) * count + | 
|  | sizeof(*request->ssids) * rdev_req->n_ssids, | 
|  | GFP_KERNEL); | 
|  | if (!request) { | 
|  | cfg80211_free_coloc_ap_list(&coloc_ap_list); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | *request = *rdev_req; | 
|  | request->n_channels = 0; | 
|  | request->scan_6ghz_params = | 
|  | (void *)&request->channels[n_channels]; | 
|  |  | 
|  | /* | 
|  | * PSC channels should not be scanned in case of direct scan with 1 SSID | 
|  | * and at least one of the reported co-located APs with same SSID | 
|  | * indicating that all APs in the same ESS are co-located | 
|  | */ | 
|  | if (count && request->n_ssids == 1 && request->ssids[0].ssid_len) { | 
|  | list_for_each_entry(ap, &coloc_ap_list, list) { | 
|  | if (ap->colocated_ess && | 
|  | cfg80211_find_ssid_match(ap, request)) { | 
|  | need_scan_psc = false; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * add to the scan request the channels that need to be scanned | 
|  | * regardless of the collocated APs (PSC channels or all channels | 
|  | * in case that NL80211_SCAN_FLAG_COLOCATED_6GHZ is not set) | 
|  | */ | 
|  | for (i = 0; i < rdev_req->n_channels; i++) { | 
|  | if (rdev_req->channels[i]->band == NL80211_BAND_6GHZ && | 
|  | ((need_scan_psc && | 
|  | cfg80211_channel_is_psc(rdev_req->channels[i])) || | 
|  | !(rdev_req->flags & NL80211_SCAN_FLAG_COLOCATED_6GHZ))) { | 
|  | cfg80211_scan_req_add_chan(request, | 
|  | rdev_req->channels[i], | 
|  | false); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!(rdev_req->flags & NL80211_SCAN_FLAG_COLOCATED_6GHZ)) | 
|  | goto skip; | 
|  |  | 
|  | list_for_each_entry(ap, &coloc_ap_list, list) { | 
|  | bool found = false; | 
|  | struct cfg80211_scan_6ghz_params *scan_6ghz_params = | 
|  | &request->scan_6ghz_params[request->n_6ghz_params]; | 
|  | struct ieee80211_channel *chan = | 
|  | ieee80211_get_channel(&rdev->wiphy, ap->center_freq); | 
|  |  | 
|  | if (!chan || chan->flags & IEEE80211_CHAN_DISABLED) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < rdev_req->n_channels; i++) { | 
|  | if (rdev_req->channels[i] == chan) | 
|  | found = true; | 
|  | } | 
|  |  | 
|  | if (!found) | 
|  | continue; | 
|  |  | 
|  | if (request->n_ssids > 0 && | 
|  | !cfg80211_find_ssid_match(ap, request)) | 
|  | continue; | 
|  |  | 
|  | if (!is_broadcast_ether_addr(request->bssid) && | 
|  | !ether_addr_equal(request->bssid, ap->bssid)) | 
|  | continue; | 
|  |  | 
|  | if (!request->n_ssids && ap->multi_bss && !ap->transmitted_bssid) | 
|  | continue; | 
|  |  | 
|  | cfg80211_scan_req_add_chan(request, chan, true); | 
|  | memcpy(scan_6ghz_params->bssid, ap->bssid, ETH_ALEN); | 
|  | scan_6ghz_params->short_ssid = ap->short_ssid; | 
|  | scan_6ghz_params->short_ssid_valid = ap->short_ssid_valid; | 
|  | scan_6ghz_params->unsolicited_probe = ap->unsolicited_probe; | 
|  |  | 
|  | /* | 
|  | * If a PSC channel is added to the scan and 'need_scan_psc' is | 
|  | * set to false, then all the APs that the scan logic is | 
|  | * interested with on the channel are collocated and thus there | 
|  | * is no need to perform the initial PSC channel listen. | 
|  | */ | 
|  | if (cfg80211_channel_is_psc(chan) && !need_scan_psc) | 
|  | scan_6ghz_params->psc_no_listen = true; | 
|  |  | 
|  | request->n_6ghz_params++; | 
|  | } | 
|  |  | 
|  | skip: | 
|  | cfg80211_free_coloc_ap_list(&coloc_ap_list); | 
|  |  | 
|  | if (request->n_channels) { | 
|  | struct cfg80211_scan_request *old = rdev->int_scan_req; | 
|  | rdev->int_scan_req = request; | 
|  |  | 
|  | /* | 
|  | * Add the ssids from the parent scan request to the new scan | 
|  | * request, so the driver would be able to use them in its | 
|  | * probe requests to discover hidden APs on PSC channels. | 
|  | */ | 
|  | request->ssids = (void *)&request->channels[request->n_channels]; | 
|  | request->n_ssids = rdev_req->n_ssids; | 
|  | memcpy(request->ssids, rdev_req->ssids, sizeof(*request->ssids) * | 
|  | request->n_ssids); | 
|  |  | 
|  | /* | 
|  | * If this scan follows a previous scan, save the scan start | 
|  | * info from the first part of the scan | 
|  | */ | 
|  | if (old) | 
|  | rdev->int_scan_req->info = old->info; | 
|  |  | 
|  | err = rdev_scan(rdev, request); | 
|  | if (err) { | 
|  | rdev->int_scan_req = old; | 
|  | kfree(request); | 
|  | } else { | 
|  | kfree(old); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | kfree(request); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | int cfg80211_scan(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct cfg80211_scan_request *request; | 
|  | struct cfg80211_scan_request *rdev_req = rdev->scan_req; | 
|  | u32 n_channels = 0, idx, i; | 
|  |  | 
|  | if (!(rdev->wiphy.flags & WIPHY_FLAG_SPLIT_SCAN_6GHZ)) | 
|  | return rdev_scan(rdev, rdev_req); | 
|  |  | 
|  | for (i = 0; i < rdev_req->n_channels; i++) { | 
|  | if (rdev_req->channels[i]->band != NL80211_BAND_6GHZ) | 
|  | n_channels++; | 
|  | } | 
|  |  | 
|  | if (!n_channels) | 
|  | return cfg80211_scan_6ghz(rdev); | 
|  |  | 
|  | request = kzalloc(struct_size(request, channels, n_channels), | 
|  | GFP_KERNEL); | 
|  | if (!request) | 
|  | return -ENOMEM; | 
|  |  | 
|  | *request = *rdev_req; | 
|  | request->n_channels = n_channels; | 
|  |  | 
|  | for (i = idx = 0; i < rdev_req->n_channels; i++) { | 
|  | if (rdev_req->channels[i]->band != NL80211_BAND_6GHZ) | 
|  | request->channels[idx++] = rdev_req->channels[i]; | 
|  | } | 
|  |  | 
|  | rdev_req->scan_6ghz = false; | 
|  | rdev->int_scan_req = request; | 
|  | return rdev_scan(rdev, request); | 
|  | } | 
|  |  | 
|  | void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, | 
|  | bool send_message) | 
|  | { | 
|  | struct cfg80211_scan_request *request, *rdev_req; | 
|  | struct wireless_dev *wdev; | 
|  | struct sk_buff *msg; | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | union iwreq_data wrqu; | 
|  | #endif | 
|  |  | 
|  | lockdep_assert_held(&rdev->wiphy.mtx); | 
|  |  | 
|  | if (rdev->scan_msg) { | 
|  | nl80211_send_scan_msg(rdev, rdev->scan_msg); | 
|  | rdev->scan_msg = NULL; | 
|  | return; | 
|  | } | 
|  |  | 
|  | rdev_req = rdev->scan_req; | 
|  | if (!rdev_req) | 
|  | return; | 
|  |  | 
|  | wdev = rdev_req->wdev; | 
|  | request = rdev->int_scan_req ? rdev->int_scan_req : rdev_req; | 
|  |  | 
|  | if (wdev_running(wdev) && | 
|  | (rdev->wiphy.flags & WIPHY_FLAG_SPLIT_SCAN_6GHZ) && | 
|  | !rdev_req->scan_6ghz && !request->info.aborted && | 
|  | !cfg80211_scan_6ghz(rdev)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * This must be before sending the other events! | 
|  | * Otherwise, wpa_supplicant gets completely confused with | 
|  | * wext events. | 
|  | */ | 
|  | if (wdev->netdev) | 
|  | cfg80211_sme_scan_done(wdev->netdev); | 
|  |  | 
|  | if (!request->info.aborted && | 
|  | request->flags & NL80211_SCAN_FLAG_FLUSH) { | 
|  | /* flush entries from previous scans */ | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | __cfg80211_bss_expire(rdev, request->scan_start); | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  |  | 
|  | msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted); | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | if (wdev->netdev && !request->info.aborted) { | 
|  | memset(&wrqu, 0, sizeof(wrqu)); | 
|  |  | 
|  | wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | dev_put(wdev->netdev); | 
|  |  | 
|  | kfree(rdev->int_scan_req); | 
|  | rdev->int_scan_req = NULL; | 
|  |  | 
|  | kfree(rdev->scan_req); | 
|  | rdev->scan_req = NULL; | 
|  |  | 
|  | if (!send_message) | 
|  | rdev->scan_msg = msg; | 
|  | else | 
|  | nl80211_send_scan_msg(rdev, msg); | 
|  | } | 
|  |  | 
|  | void __cfg80211_scan_done(struct work_struct *wk) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | rdev = container_of(wk, struct cfg80211_registered_device, | 
|  | scan_done_wk); | 
|  |  | 
|  | wiphy_lock(&rdev->wiphy); | 
|  | ___cfg80211_scan_done(rdev, true); | 
|  | wiphy_unlock(&rdev->wiphy); | 
|  | } | 
|  |  | 
|  | void cfg80211_scan_done(struct cfg80211_scan_request *request, | 
|  | struct cfg80211_scan_info *info) | 
|  | { | 
|  | struct cfg80211_scan_info old_info = request->info; | 
|  |  | 
|  | trace_cfg80211_scan_done(request, info); | 
|  | WARN_ON(request != wiphy_to_rdev(request->wiphy)->scan_req && | 
|  | request != wiphy_to_rdev(request->wiphy)->int_scan_req); | 
|  |  | 
|  | request->info = *info; | 
|  |  | 
|  | /* | 
|  | * In case the scan is split, the scan_start_tsf and tsf_bssid should | 
|  | * be of the first part. In such a case old_info.scan_start_tsf should | 
|  | * be non zero. | 
|  | */ | 
|  | if (request->scan_6ghz && old_info.scan_start_tsf) { | 
|  | request->info.scan_start_tsf = old_info.scan_start_tsf; | 
|  | memcpy(request->info.tsf_bssid, old_info.tsf_bssid, | 
|  | sizeof(request->info.tsf_bssid)); | 
|  | } | 
|  |  | 
|  | request->notified = true; | 
|  | queue_work(cfg80211_wq, &wiphy_to_rdev(request->wiphy)->scan_done_wk); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_scan_done); | 
|  |  | 
|  | void cfg80211_add_sched_scan_req(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_sched_scan_request *req) | 
|  | { | 
|  | lockdep_assert_held(&rdev->wiphy.mtx); | 
|  |  | 
|  | list_add_rcu(&req->list, &rdev->sched_scan_req_list); | 
|  | } | 
|  |  | 
|  | static void cfg80211_del_sched_scan_req(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_sched_scan_request *req) | 
|  | { | 
|  | lockdep_assert_held(&rdev->wiphy.mtx); | 
|  |  | 
|  | list_del_rcu(&req->list); | 
|  | kfree_rcu(req, rcu_head); | 
|  | } | 
|  |  | 
|  | static struct cfg80211_sched_scan_request * | 
|  | cfg80211_find_sched_scan_req(struct cfg80211_registered_device *rdev, u64 reqid) | 
|  | { | 
|  | struct cfg80211_sched_scan_request *pos; | 
|  |  | 
|  | list_for_each_entry_rcu(pos, &rdev->sched_scan_req_list, list, | 
|  | lockdep_is_held(&rdev->wiphy.mtx)) { | 
|  | if (pos->reqid == reqid) | 
|  | return pos; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Determines if a scheduled scan request can be handled. When a legacy | 
|  | * scheduled scan is running no other scheduled scan is allowed regardless | 
|  | * whether the request is for legacy or multi-support scan. When a multi-support | 
|  | * scheduled scan is running a request for legacy scan is not allowed. In this | 
|  | * case a request for multi-support scan can be handled if resources are | 
|  | * available, ie. struct wiphy::max_sched_scan_reqs limit is not yet reached. | 
|  | */ | 
|  | int cfg80211_sched_scan_req_possible(struct cfg80211_registered_device *rdev, | 
|  | bool want_multi) | 
|  | { | 
|  | struct cfg80211_sched_scan_request *pos; | 
|  | int i = 0; | 
|  |  | 
|  | list_for_each_entry(pos, &rdev->sched_scan_req_list, list) { | 
|  | /* request id zero means legacy in progress */ | 
|  | if (!i && !pos->reqid) | 
|  | return -EINPROGRESS; | 
|  | i++; | 
|  | } | 
|  |  | 
|  | if (i) { | 
|  | /* no legacy allowed when multi request(s) are active */ | 
|  | if (!want_multi) | 
|  | return -EINPROGRESS; | 
|  |  | 
|  | /* resource limit reached */ | 
|  | if (i == rdev->wiphy.max_sched_scan_reqs) | 
|  | return -ENOSPC; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void cfg80211_sched_scan_results_wk(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct cfg80211_sched_scan_request *req, *tmp; | 
|  |  | 
|  | rdev = container_of(work, struct cfg80211_registered_device, | 
|  | sched_scan_res_wk); | 
|  |  | 
|  | wiphy_lock(&rdev->wiphy); | 
|  | list_for_each_entry_safe(req, tmp, &rdev->sched_scan_req_list, list) { | 
|  | if (req->report_results) { | 
|  | req->report_results = false; | 
|  | if (req->flags & NL80211_SCAN_FLAG_FLUSH) { | 
|  | /* flush entries from previous scans */ | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | __cfg80211_bss_expire(rdev, req->scan_start); | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | req->scan_start = jiffies; | 
|  | } | 
|  | nl80211_send_sched_scan(req, | 
|  | NL80211_CMD_SCHED_SCAN_RESULTS); | 
|  | } | 
|  | } | 
|  | wiphy_unlock(&rdev->wiphy); | 
|  | } | 
|  |  | 
|  | void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_sched_scan_request *request; | 
|  |  | 
|  | trace_cfg80211_sched_scan_results(wiphy, reqid); | 
|  | /* ignore if we're not scanning */ | 
|  |  | 
|  | rcu_read_lock(); | 
|  | request = cfg80211_find_sched_scan_req(rdev, reqid); | 
|  | if (request) { | 
|  | request->report_results = true; | 
|  | queue_work(cfg80211_wq, &rdev->sched_scan_res_wk); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_sched_scan_results); | 
|  |  | 
|  | void cfg80211_sched_scan_stopped_locked(struct wiphy *wiphy, u64 reqid) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | lockdep_assert_held(&wiphy->mtx); | 
|  |  | 
|  | trace_cfg80211_sched_scan_stopped(wiphy, reqid); | 
|  |  | 
|  | __cfg80211_stop_sched_scan(rdev, reqid, true); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_sched_scan_stopped_locked); | 
|  |  | 
|  | void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid) | 
|  | { | 
|  | wiphy_lock(wiphy); | 
|  | cfg80211_sched_scan_stopped_locked(wiphy, reqid); | 
|  | wiphy_unlock(wiphy); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_sched_scan_stopped); | 
|  |  | 
|  | int cfg80211_stop_sched_scan_req(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_sched_scan_request *req, | 
|  | bool driver_initiated) | 
|  | { | 
|  | lockdep_assert_held(&rdev->wiphy.mtx); | 
|  |  | 
|  | if (!driver_initiated) { | 
|  | int err = rdev_sched_scan_stop(rdev, req->dev, req->reqid); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | nl80211_send_sched_scan(req, NL80211_CMD_SCHED_SCAN_STOPPED); | 
|  |  | 
|  | cfg80211_del_sched_scan_req(rdev, req); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, | 
|  | u64 reqid, bool driver_initiated) | 
|  | { | 
|  | struct cfg80211_sched_scan_request *sched_scan_req; | 
|  |  | 
|  | lockdep_assert_held(&rdev->wiphy.mtx); | 
|  |  | 
|  | sched_scan_req = cfg80211_find_sched_scan_req(rdev, reqid); | 
|  | if (!sched_scan_req) | 
|  | return -ENOENT; | 
|  |  | 
|  | return cfg80211_stop_sched_scan_req(rdev, sched_scan_req, | 
|  | driver_initiated); | 
|  | } | 
|  |  | 
|  | void cfg80211_bss_age(struct cfg80211_registered_device *rdev, | 
|  | unsigned long age_secs) | 
|  | { | 
|  | struct cfg80211_internal_bss *bss; | 
|  | unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC); | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | list_for_each_entry(bss, &rdev->bss_list, list) | 
|  | bss->ts -= age_jiffies; | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  |  | 
|  | void cfg80211_bss_expire(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | __cfg80211_bss_expire(rdev, jiffies - IEEE80211_SCAN_RESULT_EXPIRE); | 
|  | } | 
|  |  | 
|  | void cfg80211_bss_flush(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | __cfg80211_bss_expire(rdev, jiffies); | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_bss_flush); | 
|  |  | 
|  | const struct element * | 
|  | cfg80211_find_elem_match(u8 eid, const u8 *ies, unsigned int len, | 
|  | const u8 *match, unsigned int match_len, | 
|  | unsigned int match_offset) | 
|  | { | 
|  | const struct element *elem; | 
|  |  | 
|  | for_each_element_id(elem, eid, ies, len) { | 
|  | if (elem->datalen >= match_offset + match_len && | 
|  | !memcmp(elem->data + match_offset, match, match_len)) | 
|  | return elem; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_find_elem_match); | 
|  |  | 
|  | const struct element *cfg80211_find_vendor_elem(unsigned int oui, int oui_type, | 
|  | const u8 *ies, | 
|  | unsigned int len) | 
|  | { | 
|  | const struct element *elem; | 
|  | u8 match[] = { oui >> 16, oui >> 8, oui, oui_type }; | 
|  | int match_len = (oui_type < 0) ? 3 : sizeof(match); | 
|  |  | 
|  | if (WARN_ON(oui_type > 0xff)) | 
|  | return NULL; | 
|  |  | 
|  | elem = cfg80211_find_elem_match(WLAN_EID_VENDOR_SPECIFIC, ies, len, | 
|  | match, match_len, 0); | 
|  |  | 
|  | if (!elem || elem->datalen < 4) | 
|  | return NULL; | 
|  |  | 
|  | return elem; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_find_vendor_elem); | 
|  |  | 
|  | /** | 
|  | * enum bss_compare_mode - BSS compare mode | 
|  | * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) | 
|  | * @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode | 
|  | * @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode | 
|  | */ | 
|  | enum bss_compare_mode { | 
|  | BSS_CMP_REGULAR, | 
|  | BSS_CMP_HIDE_ZLEN, | 
|  | BSS_CMP_HIDE_NUL, | 
|  | }; | 
|  |  | 
|  | static int cmp_bss(struct cfg80211_bss *a, | 
|  | struct cfg80211_bss *b, | 
|  | enum bss_compare_mode mode) | 
|  | { | 
|  | const struct cfg80211_bss_ies *a_ies, *b_ies; | 
|  | const u8 *ie1 = NULL; | 
|  | const u8 *ie2 = NULL; | 
|  | int i, r; | 
|  |  | 
|  | if (a->channel != b->channel) | 
|  | return b->channel->center_freq - a->channel->center_freq; | 
|  |  | 
|  | a_ies = rcu_access_pointer(a->ies); | 
|  | if (!a_ies) | 
|  | return -1; | 
|  | b_ies = rcu_access_pointer(b->ies); | 
|  | if (!b_ies) | 
|  | return 1; | 
|  |  | 
|  | if (WLAN_CAPABILITY_IS_STA_BSS(a->capability)) | 
|  | ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID, | 
|  | a_ies->data, a_ies->len); | 
|  | if (WLAN_CAPABILITY_IS_STA_BSS(b->capability)) | 
|  | ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID, | 
|  | b_ies->data, b_ies->len); | 
|  | if (ie1 && ie2) { | 
|  | int mesh_id_cmp; | 
|  |  | 
|  | if (ie1[1] == ie2[1]) | 
|  | mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]); | 
|  | else | 
|  | mesh_id_cmp = ie2[1] - ie1[1]; | 
|  |  | 
|  | ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | 
|  | a_ies->data, a_ies->len); | 
|  | ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | 
|  | b_ies->data, b_ies->len); | 
|  | if (ie1 && ie2) { | 
|  | if (mesh_id_cmp) | 
|  | return mesh_id_cmp; | 
|  | if (ie1[1] != ie2[1]) | 
|  | return ie2[1] - ie1[1]; | 
|  | return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | 
|  | } | 
|  | } | 
|  |  | 
|  | r = memcmp(a->bssid, b->bssid, sizeof(a->bssid)); | 
|  | if (r) | 
|  | return r; | 
|  |  | 
|  | ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); | 
|  | ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); | 
|  |  | 
|  | if (!ie1 && !ie2) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Note that with "hide_ssid", the function returns a match if | 
|  | * the already-present BSS ("b") is a hidden SSID beacon for | 
|  | * the new BSS ("a"). | 
|  | */ | 
|  |  | 
|  | /* sort missing IE before (left of) present IE */ | 
|  | if (!ie1) | 
|  | return -1; | 
|  | if (!ie2) | 
|  | return 1; | 
|  |  | 
|  | switch (mode) { | 
|  | case BSS_CMP_HIDE_ZLEN: | 
|  | /* | 
|  | * In ZLEN mode we assume the BSS entry we're | 
|  | * looking for has a zero-length SSID. So if | 
|  | * the one we're looking at right now has that, | 
|  | * return 0. Otherwise, return the difference | 
|  | * in length, but since we're looking for the | 
|  | * 0-length it's really equivalent to returning | 
|  | * the length of the one we're looking at. | 
|  | * | 
|  | * No content comparison is needed as we assume | 
|  | * the content length is zero. | 
|  | */ | 
|  | return ie2[1]; | 
|  | case BSS_CMP_REGULAR: | 
|  | default: | 
|  | /* sort by length first, then by contents */ | 
|  | if (ie1[1] != ie2[1]) | 
|  | return ie2[1] - ie1[1]; | 
|  | return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | 
|  | case BSS_CMP_HIDE_NUL: | 
|  | if (ie1[1] != ie2[1]) | 
|  | return ie2[1] - ie1[1]; | 
|  | /* this is equivalent to memcmp(zeroes, ie2 + 2, len) */ | 
|  | for (i = 0; i < ie2[1]; i++) | 
|  | if (ie2[i + 2]) | 
|  | return -1; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool cfg80211_bss_type_match(u16 capability, | 
|  | enum nl80211_band band, | 
|  | enum ieee80211_bss_type bss_type) | 
|  | { | 
|  | bool ret = true; | 
|  | u16 mask, val; | 
|  |  | 
|  | if (bss_type == IEEE80211_BSS_TYPE_ANY) | 
|  | return ret; | 
|  |  | 
|  | if (band == NL80211_BAND_60GHZ) { | 
|  | mask = WLAN_CAPABILITY_DMG_TYPE_MASK; | 
|  | switch (bss_type) { | 
|  | case IEEE80211_BSS_TYPE_ESS: | 
|  | val = WLAN_CAPABILITY_DMG_TYPE_AP; | 
|  | break; | 
|  | case IEEE80211_BSS_TYPE_PBSS: | 
|  | val = WLAN_CAPABILITY_DMG_TYPE_PBSS; | 
|  | break; | 
|  | case IEEE80211_BSS_TYPE_IBSS: | 
|  | val = WLAN_CAPABILITY_DMG_TYPE_IBSS; | 
|  | break; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } else { | 
|  | mask = WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS; | 
|  | switch (bss_type) { | 
|  | case IEEE80211_BSS_TYPE_ESS: | 
|  | val = WLAN_CAPABILITY_ESS; | 
|  | break; | 
|  | case IEEE80211_BSS_TYPE_IBSS: | 
|  | val = WLAN_CAPABILITY_IBSS; | 
|  | break; | 
|  | case IEEE80211_BSS_TYPE_MBSS: | 
|  | val = 0; | 
|  | break; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ((capability & mask) == val); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Returned bss is reference counted and must be cleaned up appropriately. */ | 
|  | struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, | 
|  | struct ieee80211_channel *channel, | 
|  | const u8 *bssid, | 
|  | const u8 *ssid, size_t ssid_len, | 
|  | enum ieee80211_bss_type bss_type, | 
|  | enum ieee80211_privacy privacy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_internal_bss *bss, *res = NULL; | 
|  | unsigned long now = jiffies; | 
|  | int bss_privacy; | 
|  |  | 
|  | trace_cfg80211_get_bss(wiphy, channel, bssid, ssid, ssid_len, bss_type, | 
|  | privacy); | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  |  | 
|  | list_for_each_entry(bss, &rdev->bss_list, list) { | 
|  | if (!cfg80211_bss_type_match(bss->pub.capability, | 
|  | bss->pub.channel->band, bss_type)) | 
|  | continue; | 
|  |  | 
|  | bss_privacy = (bss->pub.capability & WLAN_CAPABILITY_PRIVACY); | 
|  | if ((privacy == IEEE80211_PRIVACY_ON && !bss_privacy) || | 
|  | (privacy == IEEE80211_PRIVACY_OFF && bss_privacy)) | 
|  | continue; | 
|  | if (channel && bss->pub.channel != channel) | 
|  | continue; | 
|  | if (!is_valid_ether_addr(bss->pub.bssid)) | 
|  | continue; | 
|  | /* Don't get expired BSS structs */ | 
|  | if (time_after(now, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE) && | 
|  | !atomic_read(&bss->hold)) | 
|  | continue; | 
|  | if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { | 
|  | res = bss; | 
|  | bss_ref_get(rdev, res); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | if (!res) | 
|  | return NULL; | 
|  | trace_cfg80211_return_bss(&res->pub); | 
|  | return &res->pub; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_get_bss); | 
|  |  | 
|  | static void rb_insert_bss(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *bss) | 
|  | { | 
|  | struct rb_node **p = &rdev->bss_tree.rb_node; | 
|  | struct rb_node *parent = NULL; | 
|  | struct cfg80211_internal_bss *tbss; | 
|  | int cmp; | 
|  |  | 
|  | while (*p) { | 
|  | parent = *p; | 
|  | tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); | 
|  |  | 
|  | cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR); | 
|  |  | 
|  | if (WARN_ON(!cmp)) { | 
|  | /* will sort of leak this BSS */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (cmp < 0) | 
|  | p = &(*p)->rb_left; | 
|  | else | 
|  | p = &(*p)->rb_right; | 
|  | } | 
|  |  | 
|  | rb_link_node(&bss->rbn, parent, p); | 
|  | rb_insert_color(&bss->rbn, &rdev->bss_tree); | 
|  | } | 
|  |  | 
|  | static struct cfg80211_internal_bss * | 
|  | rb_find_bss(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *res, | 
|  | enum bss_compare_mode mode) | 
|  | { | 
|  | struct rb_node *n = rdev->bss_tree.rb_node; | 
|  | struct cfg80211_internal_bss *bss; | 
|  | int r; | 
|  |  | 
|  | while (n) { | 
|  | bss = rb_entry(n, struct cfg80211_internal_bss, rbn); | 
|  | r = cmp_bss(&res->pub, &bss->pub, mode); | 
|  |  | 
|  | if (r == 0) | 
|  | return bss; | 
|  | else if (r < 0) | 
|  | n = n->rb_left; | 
|  | else | 
|  | n = n->rb_right; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *new) | 
|  | { | 
|  | const struct cfg80211_bss_ies *ies; | 
|  | struct cfg80211_internal_bss *bss; | 
|  | const u8 *ie; | 
|  | int i, ssidlen; | 
|  | u8 fold = 0; | 
|  | u32 n_entries = 0; | 
|  |  | 
|  | ies = rcu_access_pointer(new->pub.beacon_ies); | 
|  | if (WARN_ON(!ies)) | 
|  | return false; | 
|  |  | 
|  | ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | 
|  | if (!ie) { | 
|  | /* nothing to do */ | 
|  | return true; | 
|  | } | 
|  |  | 
|  | ssidlen = ie[1]; | 
|  | for (i = 0; i < ssidlen; i++) | 
|  | fold |= ie[2 + i]; | 
|  |  | 
|  | if (fold) { | 
|  | /* not a hidden SSID */ | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* This is the bad part ... */ | 
|  |  | 
|  | list_for_each_entry(bss, &rdev->bss_list, list) { | 
|  | /* | 
|  | * we're iterating all the entries anyway, so take the | 
|  | * opportunity to validate the list length accounting | 
|  | */ | 
|  | n_entries++; | 
|  |  | 
|  | if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) | 
|  | continue; | 
|  | if (bss->pub.channel != new->pub.channel) | 
|  | continue; | 
|  | if (bss->pub.scan_width != new->pub.scan_width) | 
|  | continue; | 
|  | if (rcu_access_pointer(bss->pub.beacon_ies)) | 
|  | continue; | 
|  | ies = rcu_access_pointer(bss->pub.ies); | 
|  | if (!ies) | 
|  | continue; | 
|  | ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | 
|  | if (!ie) | 
|  | continue; | 
|  | if (ssidlen && ie[1] != ssidlen) | 
|  | continue; | 
|  | if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) | 
|  | continue; | 
|  | if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) | 
|  | list_del(&bss->hidden_list); | 
|  | /* combine them */ | 
|  | list_add(&bss->hidden_list, &new->hidden_list); | 
|  | bss->pub.hidden_beacon_bss = &new->pub; | 
|  | new->refcount += bss->refcount; | 
|  | rcu_assign_pointer(bss->pub.beacon_ies, | 
|  | new->pub.beacon_ies); | 
|  | } | 
|  |  | 
|  | WARN_ONCE(n_entries != rdev->bss_entries, | 
|  | "rdev bss entries[%d]/list[len:%d] corruption\n", | 
|  | rdev->bss_entries, n_entries); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | struct cfg80211_non_tx_bss { | 
|  | struct cfg80211_bss *tx_bss; | 
|  | u8 max_bssid_indicator; | 
|  | u8 bssid_index; | 
|  | }; | 
|  |  | 
|  | static void cfg80211_update_hidden_bsses(struct cfg80211_internal_bss *known, | 
|  | const struct cfg80211_bss_ies *new_ies, | 
|  | const struct cfg80211_bss_ies *old_ies) | 
|  | { | 
|  | struct cfg80211_internal_bss *bss; | 
|  |  | 
|  | /* Assign beacon IEs to all sub entries */ | 
|  | list_for_each_entry(bss, &known->hidden_list, hidden_list) { | 
|  | const struct cfg80211_bss_ies *ies; | 
|  |  | 
|  | ies = rcu_access_pointer(bss->pub.beacon_ies); | 
|  | WARN_ON(ies != old_ies); | 
|  |  | 
|  | rcu_assign_pointer(bss->pub.beacon_ies, new_ies); | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool | 
|  | cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *known, | 
|  | struct cfg80211_internal_bss *new, | 
|  | bool signal_valid) | 
|  | { | 
|  | lockdep_assert_held(&rdev->bss_lock); | 
|  |  | 
|  | /* Update IEs */ | 
|  | if (rcu_access_pointer(new->pub.proberesp_ies)) { | 
|  | const struct cfg80211_bss_ies *old; | 
|  |  | 
|  | old = rcu_access_pointer(known->pub.proberesp_ies); | 
|  |  | 
|  | rcu_assign_pointer(known->pub.proberesp_ies, | 
|  | new->pub.proberesp_ies); | 
|  | /* Override possible earlier Beacon frame IEs */ | 
|  | rcu_assign_pointer(known->pub.ies, | 
|  | new->pub.proberesp_ies); | 
|  | if (old) | 
|  | kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | 
|  | } else if (rcu_access_pointer(new->pub.beacon_ies)) { | 
|  | const struct cfg80211_bss_ies *old; | 
|  |  | 
|  | if (known->pub.hidden_beacon_bss && | 
|  | !list_empty(&known->hidden_list)) { | 
|  | const struct cfg80211_bss_ies *f; | 
|  |  | 
|  | /* The known BSS struct is one of the probe | 
|  | * response members of a group, but we're | 
|  | * receiving a beacon (beacon_ies in the new | 
|  | * bss is used). This can only mean that the | 
|  | * AP changed its beacon from not having an | 
|  | * SSID to showing it, which is confusing so | 
|  | * drop this information. | 
|  | */ | 
|  |  | 
|  | f = rcu_access_pointer(new->pub.beacon_ies); | 
|  | kfree_rcu((struct cfg80211_bss_ies *)f, rcu_head); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | old = rcu_access_pointer(known->pub.beacon_ies); | 
|  |  | 
|  | rcu_assign_pointer(known->pub.beacon_ies, new->pub.beacon_ies); | 
|  |  | 
|  | /* Override IEs if they were from a beacon before */ | 
|  | if (old == rcu_access_pointer(known->pub.ies)) | 
|  | rcu_assign_pointer(known->pub.ies, new->pub.beacon_ies); | 
|  |  | 
|  | cfg80211_update_hidden_bsses(known, | 
|  | rcu_access_pointer(new->pub.beacon_ies), | 
|  | old); | 
|  |  | 
|  | if (old) | 
|  | kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | 
|  | } | 
|  |  | 
|  | known->pub.beacon_interval = new->pub.beacon_interval; | 
|  |  | 
|  | /* don't update the signal if beacon was heard on | 
|  | * adjacent channel. | 
|  | */ | 
|  | if (signal_valid) | 
|  | known->pub.signal = new->pub.signal; | 
|  | known->pub.capability = new->pub.capability; | 
|  | known->ts = new->ts; | 
|  | known->ts_boottime = new->ts_boottime; | 
|  | known->parent_tsf = new->parent_tsf; | 
|  | known->pub.chains = new->pub.chains; | 
|  | memcpy(known->pub.chain_signal, new->pub.chain_signal, | 
|  | IEEE80211_MAX_CHAINS); | 
|  | ether_addr_copy(known->parent_bssid, new->parent_bssid); | 
|  | known->pub.max_bssid_indicator = new->pub.max_bssid_indicator; | 
|  | known->pub.bssid_index = new->pub.bssid_index; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* Returned bss is reference counted and must be cleaned up appropriately. */ | 
|  | struct cfg80211_internal_bss * | 
|  | cfg80211_bss_update(struct cfg80211_registered_device *rdev, | 
|  | struct cfg80211_internal_bss *tmp, | 
|  | bool signal_valid, unsigned long ts) | 
|  | { | 
|  | struct cfg80211_internal_bss *found = NULL; | 
|  |  | 
|  | if (WARN_ON(!tmp->pub.channel)) | 
|  | return NULL; | 
|  |  | 
|  | tmp->ts = ts; | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  |  | 
|  | if (WARN_ON(!rcu_access_pointer(tmp->pub.ies))) { | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | found = rb_find_bss(rdev, tmp, BSS_CMP_REGULAR); | 
|  |  | 
|  | if (found) { | 
|  | if (!cfg80211_update_known_bss(rdev, found, tmp, signal_valid)) | 
|  | goto drop; | 
|  | } else { | 
|  | struct cfg80211_internal_bss *new; | 
|  | struct cfg80211_internal_bss *hidden; | 
|  | struct cfg80211_bss_ies *ies; | 
|  |  | 
|  | /* | 
|  | * create a copy -- the "res" variable that is passed in | 
|  | * is allocated on the stack since it's not needed in the | 
|  | * more common case of an update | 
|  | */ | 
|  | new = kzalloc(sizeof(*new) + rdev->wiphy.bss_priv_size, | 
|  | GFP_ATOMIC); | 
|  | if (!new) { | 
|  | ies = (void *)rcu_dereference(tmp->pub.beacon_ies); | 
|  | if (ies) | 
|  | kfree_rcu(ies, rcu_head); | 
|  | ies = (void *)rcu_dereference(tmp->pub.proberesp_ies); | 
|  | if (ies) | 
|  | kfree_rcu(ies, rcu_head); | 
|  | goto drop; | 
|  | } | 
|  | memcpy(new, tmp, sizeof(*new)); | 
|  | new->refcount = 1; | 
|  | INIT_LIST_HEAD(&new->hidden_list); | 
|  | INIT_LIST_HEAD(&new->pub.nontrans_list); | 
|  | /* we'll set this later if it was non-NULL */ | 
|  | new->pub.transmitted_bss = NULL; | 
|  |  | 
|  | if (rcu_access_pointer(tmp->pub.proberesp_ies)) { | 
|  | hidden = rb_find_bss(rdev, tmp, BSS_CMP_HIDE_ZLEN); | 
|  | if (!hidden) | 
|  | hidden = rb_find_bss(rdev, tmp, | 
|  | BSS_CMP_HIDE_NUL); | 
|  | if (hidden) { | 
|  | new->pub.hidden_beacon_bss = &hidden->pub; | 
|  | list_add(&new->hidden_list, | 
|  | &hidden->hidden_list); | 
|  | hidden->refcount++; | 
|  |  | 
|  | ies = (void *)rcu_access_pointer(new->pub.beacon_ies); | 
|  | rcu_assign_pointer(new->pub.beacon_ies, | 
|  | hidden->pub.beacon_ies); | 
|  | if (ies) | 
|  | kfree_rcu(ies, rcu_head); | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Ok so we found a beacon, and don't have an entry. If | 
|  | * it's a beacon with hidden SSID, we might be in for an | 
|  | * expensive search for any probe responses that should | 
|  | * be grouped with this beacon for updates ... | 
|  | */ | 
|  | if (!cfg80211_combine_bsses(rdev, new)) { | 
|  | bss_ref_put(rdev, new); | 
|  | goto drop; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rdev->bss_entries >= bss_entries_limit && | 
|  | !cfg80211_bss_expire_oldest(rdev)) { | 
|  | bss_ref_put(rdev, new); | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | /* This must be before the call to bss_ref_get */ | 
|  | if (tmp->pub.transmitted_bss) { | 
|  | struct cfg80211_internal_bss *pbss = | 
|  | container_of(tmp->pub.transmitted_bss, | 
|  | struct cfg80211_internal_bss, | 
|  | pub); | 
|  |  | 
|  | new->pub.transmitted_bss = tmp->pub.transmitted_bss; | 
|  | bss_ref_get(rdev, pbss); | 
|  | } | 
|  |  | 
|  | list_add_tail(&new->list, &rdev->bss_list); | 
|  | rdev->bss_entries++; | 
|  | rb_insert_bss(rdev, new); | 
|  | found = new; | 
|  | } | 
|  |  | 
|  | rdev->bss_generation++; | 
|  | bss_ref_get(rdev, found); | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  |  | 
|  | return found; | 
|  | drop: | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int cfg80211_get_ies_channel_number(const u8 *ie, size_t ielen, | 
|  | enum nl80211_band band, | 
|  | enum cfg80211_bss_frame_type ftype) | 
|  | { | 
|  | const struct element *tmp; | 
|  |  | 
|  | if (band == NL80211_BAND_6GHZ) { | 
|  | struct ieee80211_he_operation *he_oper; | 
|  |  | 
|  | tmp = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_OPERATION, ie, | 
|  | ielen); | 
|  | if (tmp && tmp->datalen >= sizeof(*he_oper) && | 
|  | tmp->datalen >= ieee80211_he_oper_size(&tmp->data[1])) { | 
|  | const struct ieee80211_he_6ghz_oper *he_6ghz_oper; | 
|  |  | 
|  | he_oper = (void *)&tmp->data[1]; | 
|  |  | 
|  | he_6ghz_oper = ieee80211_he_6ghz_oper(he_oper); | 
|  | if (!he_6ghz_oper) | 
|  | return -1; | 
|  |  | 
|  | if (ftype != CFG80211_BSS_FTYPE_BEACON || | 
|  | he_6ghz_oper->control & IEEE80211_HE_6GHZ_OPER_CTRL_DUP_BEACON) | 
|  | return he_6ghz_oper->primary; | 
|  | } | 
|  | } else if (band == NL80211_BAND_S1GHZ) { | 
|  | tmp = cfg80211_find_elem(WLAN_EID_S1G_OPERATION, ie, ielen); | 
|  | if (tmp && tmp->datalen >= sizeof(struct ieee80211_s1g_oper_ie)) { | 
|  | struct ieee80211_s1g_oper_ie *s1gop = (void *)tmp->data; | 
|  |  | 
|  | return s1gop->oper_ch; | 
|  | } | 
|  | } else { | 
|  | tmp = cfg80211_find_elem(WLAN_EID_DS_PARAMS, ie, ielen); | 
|  | if (tmp && tmp->datalen == 1) | 
|  | return tmp->data[0]; | 
|  |  | 
|  | tmp = cfg80211_find_elem(WLAN_EID_HT_OPERATION, ie, ielen); | 
|  | if (tmp && | 
|  | tmp->datalen >= sizeof(struct ieee80211_ht_operation)) { | 
|  | struct ieee80211_ht_operation *htop = (void *)tmp->data; | 
|  |  | 
|  | return htop->primary_chan; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_get_ies_channel_number); | 
|  |  | 
|  | /* | 
|  | * Update RX channel information based on the available frame payload | 
|  | * information. This is mainly for the 2.4 GHz band where frames can be received | 
|  | * from neighboring channels and the Beacon frames use the DSSS Parameter Set | 
|  | * element to indicate the current (transmitting) channel, but this might also | 
|  | * be needed on other bands if RX frequency does not match with the actual | 
|  | * operating channel of a BSS, or if the AP reports a different primary channel. | 
|  | */ | 
|  | static struct ieee80211_channel * | 
|  | cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen, | 
|  | struct ieee80211_channel *channel, | 
|  | enum nl80211_bss_scan_width scan_width, | 
|  | enum cfg80211_bss_frame_type ftype) | 
|  | { | 
|  | u32 freq; | 
|  | int channel_number; | 
|  | struct ieee80211_channel *alt_channel; | 
|  |  | 
|  | channel_number = cfg80211_get_ies_channel_number(ie, ielen, | 
|  | channel->band, ftype); | 
|  |  | 
|  | if (channel_number < 0) { | 
|  | /* No channel information in frame payload */ | 
|  | return channel; | 
|  | } | 
|  |  | 
|  | freq = ieee80211_channel_to_freq_khz(channel_number, channel->band); | 
|  |  | 
|  | /* | 
|  | * In 6GHz, duplicated beacon indication is relevant for | 
|  | * beacons only. | 
|  | */ | 
|  | if (channel->band == NL80211_BAND_6GHZ && | 
|  | (freq == channel->center_freq || | 
|  | abs(freq - channel->center_freq) > 80)) | 
|  | return channel; | 
|  |  | 
|  | alt_channel = ieee80211_get_channel_khz(wiphy, freq); | 
|  | if (!alt_channel) { | 
|  | if (channel->band == NL80211_BAND_2GHZ) { | 
|  | /* | 
|  | * Better not allow unexpected channels when that could | 
|  | * be going beyond the 1-11 range (e.g., discovering | 
|  | * BSS on channel 12 when radio is configured for | 
|  | * channel 11. | 
|  | */ | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* No match for the payload channel number - ignore it */ | 
|  | return channel; | 
|  | } | 
|  |  | 
|  | if (scan_width == NL80211_BSS_CHAN_WIDTH_10 || | 
|  | scan_width == NL80211_BSS_CHAN_WIDTH_5) { | 
|  | /* | 
|  | * Ignore channel number in 5 and 10 MHz channels where there | 
|  | * may not be an n:1 or 1:n mapping between frequencies and | 
|  | * channel numbers. | 
|  | */ | 
|  | return channel; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Use the channel determined through the payload channel number | 
|  | * instead of the RX channel reported by the driver. | 
|  | */ | 
|  | if (alt_channel->flags & IEEE80211_CHAN_DISABLED) | 
|  | return NULL; | 
|  | return alt_channel; | 
|  | } | 
|  |  | 
|  | /* Returned bss is reference counted and must be cleaned up appropriately. */ | 
|  | static struct cfg80211_bss * | 
|  | cfg80211_inform_single_bss_data(struct wiphy *wiphy, | 
|  | struct cfg80211_inform_bss *data, | 
|  | enum cfg80211_bss_frame_type ftype, | 
|  | const u8 *bssid, u64 tsf, u16 capability, | 
|  | u16 beacon_interval, const u8 *ie, size_t ielen, | 
|  | struct cfg80211_non_tx_bss *non_tx_data, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_bss_ies *ies; | 
|  | struct ieee80211_channel *channel; | 
|  | struct cfg80211_internal_bss tmp = {}, *res; | 
|  | int bss_type; | 
|  | bool signal_valid; | 
|  | unsigned long ts; | 
|  |  | 
|  | if (WARN_ON(!wiphy)) | 
|  | return NULL; | 
|  |  | 
|  | if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && | 
|  | (data->signal < 0 || data->signal > 100))) | 
|  | return NULL; | 
|  |  | 
|  | channel = cfg80211_get_bss_channel(wiphy, ie, ielen, data->chan, | 
|  | data->scan_width, ftype); | 
|  | if (!channel) | 
|  | return NULL; | 
|  |  | 
|  | memcpy(tmp.pub.bssid, bssid, ETH_ALEN); | 
|  | tmp.pub.channel = channel; | 
|  | tmp.pub.scan_width = data->scan_width; | 
|  | tmp.pub.signal = data->signal; | 
|  | tmp.pub.beacon_interval = beacon_interval; | 
|  | tmp.pub.capability = capability; | 
|  | tmp.ts_boottime = data->boottime_ns; | 
|  | tmp.parent_tsf = data->parent_tsf; | 
|  | ether_addr_copy(tmp.parent_bssid, data->parent_bssid); | 
|  |  | 
|  | if (non_tx_data) { | 
|  | tmp.pub.transmitted_bss = non_tx_data->tx_bss; | 
|  | ts = bss_from_pub(non_tx_data->tx_bss)->ts; | 
|  | tmp.pub.bssid_index = non_tx_data->bssid_index; | 
|  | tmp.pub.max_bssid_indicator = non_tx_data->max_bssid_indicator; | 
|  | } else { | 
|  | ts = jiffies; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we do not know here whether the IEs are from a Beacon or Probe | 
|  | * Response frame, we need to pick one of the options and only use it | 
|  | * with the driver that does not provide the full Beacon/Probe Response | 
|  | * frame. Use Beacon frame pointer to avoid indicating that this should | 
|  | * override the IEs pointer should we have received an earlier | 
|  | * indication of Probe Response data. | 
|  | */ | 
|  | ies = kzalloc(sizeof(*ies) + ielen, gfp); | 
|  | if (!ies) | 
|  | return NULL; | 
|  | ies->len = ielen; | 
|  | ies->tsf = tsf; | 
|  | ies->from_beacon = false; | 
|  | memcpy(ies->data, ie, ielen); | 
|  |  | 
|  | switch (ftype) { | 
|  | case CFG80211_BSS_FTYPE_BEACON: | 
|  | ies->from_beacon = true; | 
|  | fallthrough; | 
|  | case CFG80211_BSS_FTYPE_UNKNOWN: | 
|  | rcu_assign_pointer(tmp.pub.beacon_ies, ies); | 
|  | break; | 
|  | case CFG80211_BSS_FTYPE_PRESP: | 
|  | rcu_assign_pointer(tmp.pub.proberesp_ies, ies); | 
|  | break; | 
|  | } | 
|  | rcu_assign_pointer(tmp.pub.ies, ies); | 
|  |  | 
|  | signal_valid = data->chan == channel; | 
|  | res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid, ts); | 
|  | if (!res) | 
|  | return NULL; | 
|  |  | 
|  | if (channel->band == NL80211_BAND_60GHZ) { | 
|  | bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK; | 
|  | if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP || | 
|  | bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS) | 
|  | regulatory_hint_found_beacon(wiphy, channel, gfp); | 
|  | } else { | 
|  | if (res->pub.capability & WLAN_CAPABILITY_ESS) | 
|  | regulatory_hint_found_beacon(wiphy, channel, gfp); | 
|  | } | 
|  |  | 
|  | if (non_tx_data) { | 
|  | /* this is a nontransmitting bss, we need to add it to | 
|  | * transmitting bss' list if it is not there | 
|  | */ | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | if (cfg80211_add_nontrans_list(non_tx_data->tx_bss, | 
|  | &res->pub)) { | 
|  | if (__cfg80211_unlink_bss(rdev, res)) { | 
|  | rdev->bss_generation++; | 
|  | res = NULL; | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  |  | 
|  | if (!res) | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | trace_cfg80211_return_bss(&res->pub); | 
|  | /* cfg80211_bss_update gives us a referenced result */ | 
|  | return &res->pub; | 
|  | } | 
|  |  | 
|  | static const struct element | 
|  | *cfg80211_get_profile_continuation(const u8 *ie, size_t ielen, | 
|  | const struct element *mbssid_elem, | 
|  | const struct element *sub_elem) | 
|  | { | 
|  | const u8 *mbssid_end = mbssid_elem->data + mbssid_elem->datalen; | 
|  | const struct element *next_mbssid; | 
|  | const struct element *next_sub; | 
|  |  | 
|  | next_mbssid = cfg80211_find_elem(WLAN_EID_MULTIPLE_BSSID, | 
|  | mbssid_end, | 
|  | ielen - (mbssid_end - ie)); | 
|  |  | 
|  | /* | 
|  | * If it is not the last subelement in current MBSSID IE or there isn't | 
|  | * a next MBSSID IE - profile is complete. | 
|  | */ | 
|  | if ((sub_elem->data + sub_elem->datalen < mbssid_end - 1) || | 
|  | !next_mbssid) | 
|  | return NULL; | 
|  |  | 
|  | /* For any length error, just return NULL */ | 
|  |  | 
|  | if (next_mbssid->datalen < 4) | 
|  | return NULL; | 
|  |  | 
|  | next_sub = (void *)&next_mbssid->data[1]; | 
|  |  | 
|  | if (next_mbssid->data + next_mbssid->datalen < | 
|  | next_sub->data + next_sub->datalen) | 
|  | return NULL; | 
|  |  | 
|  | if (next_sub->id != 0 || next_sub->datalen < 2) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * Check if the first element in the next sub element is a start | 
|  | * of a new profile | 
|  | */ | 
|  | return next_sub->data[0] == WLAN_EID_NON_TX_BSSID_CAP ? | 
|  | NULL : next_mbssid; | 
|  | } | 
|  |  | 
|  | size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, | 
|  | const struct element *mbssid_elem, | 
|  | const struct element *sub_elem, | 
|  | u8 *merged_ie, size_t max_copy_len) | 
|  | { | 
|  | size_t copied_len = sub_elem->datalen; | 
|  | const struct element *next_mbssid; | 
|  |  | 
|  | if (sub_elem->datalen > max_copy_len) | 
|  | return 0; | 
|  |  | 
|  | memcpy(merged_ie, sub_elem->data, sub_elem->datalen); | 
|  |  | 
|  | while ((next_mbssid = cfg80211_get_profile_continuation(ie, ielen, | 
|  | mbssid_elem, | 
|  | sub_elem))) { | 
|  | const struct element *next_sub = (void *)&next_mbssid->data[1]; | 
|  |  | 
|  | if (copied_len + next_sub->datalen > max_copy_len) | 
|  | break; | 
|  | memcpy(merged_ie + copied_len, next_sub->data, | 
|  | next_sub->datalen); | 
|  | copied_len += next_sub->datalen; | 
|  | } | 
|  |  | 
|  | return copied_len; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_merge_profile); | 
|  |  | 
|  | static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, | 
|  | struct cfg80211_inform_bss *data, | 
|  | enum cfg80211_bss_frame_type ftype, | 
|  | const u8 *bssid, u64 tsf, | 
|  | u16 beacon_interval, const u8 *ie, | 
|  | size_t ielen, | 
|  | struct cfg80211_non_tx_bss *non_tx_data, | 
|  | gfp_t gfp) | 
|  | { | 
|  | const u8 *mbssid_index_ie; | 
|  | const struct element *elem, *sub; | 
|  | size_t new_ie_len; | 
|  | u8 new_bssid[ETH_ALEN]; | 
|  | u8 *new_ie, *profile; | 
|  | u64 seen_indices = 0; | 
|  | u16 capability; | 
|  | struct cfg80211_bss *bss; | 
|  |  | 
|  | if (!non_tx_data) | 
|  | return; | 
|  | if (!cfg80211_find_elem(WLAN_EID_MULTIPLE_BSSID, ie, ielen)) | 
|  | return; | 
|  | if (!wiphy->support_mbssid) | 
|  | return; | 
|  | if (wiphy->support_only_he_mbssid && | 
|  | !cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY, ie, ielen)) | 
|  | return; | 
|  |  | 
|  | new_ie = kmalloc(IEEE80211_MAX_DATA_LEN, gfp); | 
|  | if (!new_ie) | 
|  | return; | 
|  |  | 
|  | profile = kmalloc(ielen, gfp); | 
|  | if (!profile) | 
|  | goto out; | 
|  |  | 
|  | for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, ie, ielen) { | 
|  | if (elem->datalen < 4) | 
|  | continue; | 
|  | if (elem->data[0] < 1 || (int)elem->data[0] > 8) | 
|  | continue; | 
|  | for_each_element(sub, elem->data + 1, elem->datalen - 1) { | 
|  | u8 profile_len; | 
|  |  | 
|  | if (sub->id != 0 || sub->datalen < 4) { | 
|  | /* not a valid BSS profile */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (sub->data[0] != WLAN_EID_NON_TX_BSSID_CAP || | 
|  | sub->data[1] != 2) { | 
|  | /* The first element within the Nontransmitted | 
|  | * BSSID Profile is not the Nontransmitted | 
|  | * BSSID Capability element. | 
|  | */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | memset(profile, 0, ielen); | 
|  | profile_len = cfg80211_merge_profile(ie, ielen, | 
|  | elem, | 
|  | sub, | 
|  | profile, | 
|  | ielen); | 
|  |  | 
|  | /* found a Nontransmitted BSSID Profile */ | 
|  | mbssid_index_ie = cfg80211_find_ie | 
|  | (WLAN_EID_MULTI_BSSID_IDX, | 
|  | profile, profile_len); | 
|  | if (!mbssid_index_ie || mbssid_index_ie[1] < 1 || | 
|  | mbssid_index_ie[2] == 0 || | 
|  | mbssid_index_ie[2] > 46) { | 
|  | /* No valid Multiple BSSID-Index element */ | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (seen_indices & BIT_ULL(mbssid_index_ie[2])) | 
|  | /* We don't support legacy split of a profile */ | 
|  | net_dbg_ratelimited("Partial info for BSSID index %d\n", | 
|  | mbssid_index_ie[2]); | 
|  |  | 
|  | seen_indices |= BIT_ULL(mbssid_index_ie[2]); | 
|  |  | 
|  | non_tx_data->bssid_index = mbssid_index_ie[2]; | 
|  | non_tx_data->max_bssid_indicator = elem->data[0]; | 
|  |  | 
|  | cfg80211_gen_new_bssid(bssid, | 
|  | non_tx_data->max_bssid_indicator, | 
|  | non_tx_data->bssid_index, | 
|  | new_bssid); | 
|  | memset(new_ie, 0, IEEE80211_MAX_DATA_LEN); | 
|  | new_ie_len = cfg80211_gen_new_ie(ie, ielen, | 
|  | profile, | 
|  | profile_len, new_ie, | 
|  | IEEE80211_MAX_DATA_LEN); | 
|  | if (!new_ie_len) | 
|  | continue; | 
|  |  | 
|  | capability = get_unaligned_le16(profile + 2); | 
|  | bss = cfg80211_inform_single_bss_data(wiphy, data, | 
|  | ftype, | 
|  | new_bssid, tsf, | 
|  | capability, | 
|  | beacon_interval, | 
|  | new_ie, | 
|  | new_ie_len, | 
|  | non_tx_data, | 
|  | gfp); | 
|  | if (!bss) | 
|  | break; | 
|  | cfg80211_put_bss(wiphy, bss); | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(new_ie); | 
|  | kfree(profile); | 
|  | } | 
|  |  | 
|  | struct cfg80211_bss * | 
|  | cfg80211_inform_bss_data(struct wiphy *wiphy, | 
|  | struct cfg80211_inform_bss *data, | 
|  | enum cfg80211_bss_frame_type ftype, | 
|  | const u8 *bssid, u64 tsf, u16 capability, | 
|  | u16 beacon_interval, const u8 *ie, size_t ielen, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct cfg80211_bss *res; | 
|  | struct cfg80211_non_tx_bss non_tx_data; | 
|  |  | 
|  | res = cfg80211_inform_single_bss_data(wiphy, data, ftype, bssid, tsf, | 
|  | capability, beacon_interval, ie, | 
|  | ielen, NULL, gfp); | 
|  | if (!res) | 
|  | return NULL; | 
|  | non_tx_data.tx_bss = res; | 
|  | cfg80211_parse_mbssid_data(wiphy, data, ftype, bssid, tsf, | 
|  | beacon_interval, ie, ielen, &non_tx_data, | 
|  | gfp); | 
|  | return res; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_inform_bss_data); | 
|  |  | 
|  | /* cfg80211_inform_bss_width_frame helper */ | 
|  | static struct cfg80211_bss * | 
|  | cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy, | 
|  | struct cfg80211_inform_bss *data, | 
|  | struct ieee80211_mgmt *mgmt, size_t len, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct cfg80211_internal_bss tmp = {}, *res; | 
|  | struct cfg80211_bss_ies *ies; | 
|  | struct ieee80211_channel *channel; | 
|  | bool signal_valid; | 
|  | struct ieee80211_ext *ext = NULL; | 
|  | u8 *bssid, *variable; | 
|  | u16 capability, beacon_int; | 
|  | size_t ielen, min_hdr_len = offsetof(struct ieee80211_mgmt, | 
|  | u.probe_resp.variable); | 
|  | int bss_type; | 
|  | enum cfg80211_bss_frame_type ftype; | 
|  |  | 
|  | BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) != | 
|  | offsetof(struct ieee80211_mgmt, u.beacon.variable)); | 
|  |  | 
|  | trace_cfg80211_inform_bss_frame(wiphy, data, mgmt, len); | 
|  |  | 
|  | if (WARN_ON(!mgmt)) | 
|  | return NULL; | 
|  |  | 
|  | if (WARN_ON(!wiphy)) | 
|  | return NULL; | 
|  |  | 
|  | if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && | 
|  | (data->signal < 0 || data->signal > 100))) | 
|  | return NULL; | 
|  |  | 
|  | if (ieee80211_is_s1g_beacon(mgmt->frame_control)) { | 
|  | ext = (void *) mgmt; | 
|  | min_hdr_len = offsetof(struct ieee80211_ext, u.s1g_beacon); | 
|  | if (ieee80211_is_s1g_short_beacon(mgmt->frame_control)) | 
|  | min_hdr_len = offsetof(struct ieee80211_ext, | 
|  | u.s1g_short_beacon.variable); | 
|  | } | 
|  |  | 
|  | if (WARN_ON(len < min_hdr_len)) | 
|  | return NULL; | 
|  |  | 
|  | ielen = len - min_hdr_len; | 
|  | variable = mgmt->u.probe_resp.variable; | 
|  | if (ext) { | 
|  | if (ieee80211_is_s1g_short_beacon(mgmt->frame_control)) | 
|  | variable = ext->u.s1g_short_beacon.variable; | 
|  | else | 
|  | variable = ext->u.s1g_beacon.variable; | 
|  | } | 
|  |  | 
|  | if (ieee80211_is_beacon(mgmt->frame_control)) | 
|  | ftype = CFG80211_BSS_FTYPE_BEACON; | 
|  | else if (ieee80211_is_probe_resp(mgmt->frame_control)) | 
|  | ftype = CFG80211_BSS_FTYPE_PRESP; | 
|  | else | 
|  | ftype = CFG80211_BSS_FTYPE_UNKNOWN; | 
|  |  | 
|  | channel = cfg80211_get_bss_channel(wiphy, variable, | 
|  | ielen, data->chan, data->scan_width, | 
|  | ftype); | 
|  | if (!channel) | 
|  | return NULL; | 
|  |  | 
|  | if (ext) { | 
|  | const struct ieee80211_s1g_bcn_compat_ie *compat; | 
|  | const struct element *elem; | 
|  |  | 
|  | elem = cfg80211_find_elem(WLAN_EID_S1G_BCN_COMPAT, | 
|  | variable, ielen); | 
|  | if (!elem) | 
|  | return NULL; | 
|  | if (elem->datalen < sizeof(*compat)) | 
|  | return NULL; | 
|  | compat = (void *)elem->data; | 
|  | bssid = ext->u.s1g_beacon.sa; | 
|  | capability = le16_to_cpu(compat->compat_info); | 
|  | beacon_int = le16_to_cpu(compat->beacon_int); | 
|  | } else { | 
|  | bssid = mgmt->bssid; | 
|  | beacon_int = le16_to_cpu(mgmt->u.probe_resp.beacon_int); | 
|  | capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); | 
|  | } | 
|  |  | 
|  | ies = kzalloc(sizeof(*ies) + ielen, gfp); | 
|  | if (!ies) | 
|  | return NULL; | 
|  | ies->len = ielen; | 
|  | ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); | 
|  | ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control) || | 
|  | ieee80211_is_s1g_beacon(mgmt->frame_control); | 
|  | memcpy(ies->data, variable, ielen); | 
|  |  | 
|  | if (ieee80211_is_probe_resp(mgmt->frame_control)) | 
|  | rcu_assign_pointer(tmp.pub.proberesp_ies, ies); | 
|  | else | 
|  | rcu_assign_pointer(tmp.pub.beacon_ies, ies); | 
|  | rcu_assign_pointer(tmp.pub.ies, ies); | 
|  |  | 
|  | memcpy(tmp.pub.bssid, bssid, ETH_ALEN); | 
|  | tmp.pub.beacon_interval = beacon_int; | 
|  | tmp.pub.capability = capability; | 
|  | tmp.pub.channel = channel; | 
|  | tmp.pub.scan_width = data->scan_width; | 
|  | tmp.pub.signal = data->signal; | 
|  | tmp.ts_boottime = data->boottime_ns; | 
|  | tmp.parent_tsf = data->parent_tsf; | 
|  | tmp.pub.chains = data->chains; | 
|  | memcpy(tmp.pub.chain_signal, data->chain_signal, IEEE80211_MAX_CHAINS); | 
|  | ether_addr_copy(tmp.parent_bssid, data->parent_bssid); | 
|  |  | 
|  | signal_valid = data->chan == channel; | 
|  | res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid, | 
|  | jiffies); | 
|  | if (!res) | 
|  | return NULL; | 
|  |  | 
|  | if (channel->band == NL80211_BAND_60GHZ) { | 
|  | bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK; | 
|  | if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP || | 
|  | bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS) | 
|  | regulatory_hint_found_beacon(wiphy, channel, gfp); | 
|  | } else { | 
|  | if (res->pub.capability & WLAN_CAPABILITY_ESS) | 
|  | regulatory_hint_found_beacon(wiphy, channel, gfp); | 
|  | } | 
|  |  | 
|  | trace_cfg80211_return_bss(&res->pub); | 
|  | /* cfg80211_bss_update gives us a referenced result */ | 
|  | return &res->pub; | 
|  | } | 
|  |  | 
|  | struct cfg80211_bss * | 
|  | cfg80211_inform_bss_frame_data(struct wiphy *wiphy, | 
|  | struct cfg80211_inform_bss *data, | 
|  | struct ieee80211_mgmt *mgmt, size_t len, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct cfg80211_bss *res; | 
|  | const u8 *ie = mgmt->u.probe_resp.variable; | 
|  | size_t ielen = len - offsetof(struct ieee80211_mgmt, | 
|  | u.probe_resp.variable); | 
|  | enum cfg80211_bss_frame_type ftype; | 
|  | struct cfg80211_non_tx_bss non_tx_data = {}; | 
|  |  | 
|  | res = cfg80211_inform_single_bss_frame_data(wiphy, data, mgmt, | 
|  | len, gfp); | 
|  | if (!res) | 
|  | return NULL; | 
|  |  | 
|  | /* don't do any further MBSSID handling for S1G */ | 
|  | if (ieee80211_is_s1g_beacon(mgmt->frame_control)) | 
|  | return res; | 
|  |  | 
|  | ftype = ieee80211_is_beacon(mgmt->frame_control) ? | 
|  | CFG80211_BSS_FTYPE_BEACON : CFG80211_BSS_FTYPE_PRESP; | 
|  | non_tx_data.tx_bss = res; | 
|  |  | 
|  | /* process each non-transmitting bss */ | 
|  | cfg80211_parse_mbssid_data(wiphy, data, ftype, mgmt->bssid, | 
|  | le64_to_cpu(mgmt->u.probe_resp.timestamp), | 
|  | le16_to_cpu(mgmt->u.probe_resp.beacon_int), | 
|  | ie, ielen, &non_tx_data, gfp); | 
|  |  | 
|  | return res; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_inform_bss_frame_data); | 
|  |  | 
|  | void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_internal_bss *bss; | 
|  |  | 
|  | if (!pub) | 
|  | return; | 
|  |  | 
|  | bss = container_of(pub, struct cfg80211_internal_bss, pub); | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | bss_ref_get(rdev, bss); | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_ref_bss); | 
|  |  | 
|  | void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_internal_bss *bss; | 
|  |  | 
|  | if (!pub) | 
|  | return; | 
|  |  | 
|  | bss = container_of(pub, struct cfg80211_internal_bss, pub); | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | bss_ref_put(rdev, bss); | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_put_bss); | 
|  |  | 
|  | void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_internal_bss *bss, *tmp1; | 
|  | struct cfg80211_bss *nontrans_bss, *tmp; | 
|  |  | 
|  | if (WARN_ON(!pub)) | 
|  | return; | 
|  |  | 
|  | bss = container_of(pub, struct cfg80211_internal_bss, pub); | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | if (list_empty(&bss->list)) | 
|  | goto out; | 
|  |  | 
|  | list_for_each_entry_safe(nontrans_bss, tmp, | 
|  | &pub->nontrans_list, | 
|  | nontrans_list) { | 
|  | tmp1 = container_of(nontrans_bss, | 
|  | struct cfg80211_internal_bss, pub); | 
|  | if (__cfg80211_unlink_bss(rdev, tmp1)) | 
|  | rdev->bss_generation++; | 
|  | } | 
|  |  | 
|  | if (__cfg80211_unlink_bss(rdev, bss)) | 
|  | rdev->bss_generation++; | 
|  | out: | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_unlink_bss); | 
|  |  | 
|  | void cfg80211_bss_iter(struct wiphy *wiphy, | 
|  | struct cfg80211_chan_def *chandef, | 
|  | void (*iter)(struct wiphy *wiphy, | 
|  | struct cfg80211_bss *bss, | 
|  | void *data), | 
|  | void *iter_data) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_internal_bss *bss; | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  |  | 
|  | list_for_each_entry(bss, &rdev->bss_list, list) { | 
|  | if (!chandef || cfg80211_is_sub_chan(chandef, bss->pub.channel, | 
|  | false)) | 
|  | iter(wiphy, &bss->pub, iter_data); | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_bss_iter); | 
|  |  | 
|  | void cfg80211_update_assoc_bss_entry(struct wireless_dev *wdev, | 
|  | unsigned int link_id, | 
|  | struct ieee80211_channel *chan) | 
|  | { | 
|  | struct wiphy *wiphy = wdev->wiphy; | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | struct cfg80211_internal_bss *cbss = wdev->links[link_id].client.current_bss; | 
|  | struct cfg80211_internal_bss *new = NULL; | 
|  | struct cfg80211_internal_bss *bss; | 
|  | struct cfg80211_bss *nontrans_bss; | 
|  | struct cfg80211_bss *tmp; | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  |  | 
|  | /* | 
|  | * Some APs use CSA also for bandwidth changes, i.e., without actually | 
|  | * changing the control channel, so no need to update in such a case. | 
|  | */ | 
|  | if (cbss->pub.channel == chan) | 
|  | goto done; | 
|  |  | 
|  | /* use transmitting bss */ | 
|  | if (cbss->pub.transmitted_bss) | 
|  | cbss = container_of(cbss->pub.transmitted_bss, | 
|  | struct cfg80211_internal_bss, | 
|  | pub); | 
|  |  | 
|  | cbss->pub.channel = chan; | 
|  |  | 
|  | list_for_each_entry(bss, &rdev->bss_list, list) { | 
|  | if (!cfg80211_bss_type_match(bss->pub.capability, | 
|  | bss->pub.channel->band, | 
|  | wdev->conn_bss_type)) | 
|  | continue; | 
|  |  | 
|  | if (bss == cbss) | 
|  | continue; | 
|  |  | 
|  | if (!cmp_bss(&bss->pub, &cbss->pub, BSS_CMP_REGULAR)) { | 
|  | new = bss; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (new) { | 
|  | /* to save time, update IEs for transmitting bss only */ | 
|  | if (cfg80211_update_known_bss(rdev, cbss, new, false)) { | 
|  | new->pub.proberesp_ies = NULL; | 
|  | new->pub.beacon_ies = NULL; | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(nontrans_bss, tmp, | 
|  | &new->pub.nontrans_list, | 
|  | nontrans_list) { | 
|  | bss = container_of(nontrans_bss, | 
|  | struct cfg80211_internal_bss, pub); | 
|  | if (__cfg80211_unlink_bss(rdev, bss)) | 
|  | rdev->bss_generation++; | 
|  | } | 
|  |  | 
|  | WARN_ON(atomic_read(&new->hold)); | 
|  | if (!WARN_ON(!__cfg80211_unlink_bss(rdev, new))) | 
|  | rdev->bss_generation++; | 
|  | } | 
|  |  | 
|  | rb_erase(&cbss->rbn, &rdev->bss_tree); | 
|  | rb_insert_bss(rdev, cbss); | 
|  | rdev->bss_generation++; | 
|  |  | 
|  | list_for_each_entry_safe(nontrans_bss, tmp, | 
|  | &cbss->pub.nontrans_list, | 
|  | nontrans_list) { | 
|  | bss = container_of(nontrans_bss, | 
|  | struct cfg80211_internal_bss, pub); | 
|  | bss->pub.channel = chan; | 
|  | rb_erase(&bss->rbn, &rdev->bss_tree); | 
|  | rb_insert_bss(rdev, bss); | 
|  | rdev->bss_generation++; | 
|  | } | 
|  |  | 
|  | done: | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_WEXT | 
|  | static struct cfg80211_registered_device * | 
|  | cfg80211_get_dev_from_ifindex(struct net *net, int ifindex) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct net_device *dev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | dev = dev_get_by_index(net, ifindex); | 
|  | if (!dev) | 
|  | return ERR_PTR(-ENODEV); | 
|  | if (dev->ieee80211_ptr) | 
|  | rdev = wiphy_to_rdev(dev->ieee80211_ptr->wiphy); | 
|  | else | 
|  | rdev = ERR_PTR(-ENODEV); | 
|  | dev_put(dev); | 
|  | return rdev; | 
|  | } | 
|  |  | 
|  | int cfg80211_wext_siwscan(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct wiphy *wiphy; | 
|  | struct iw_scan_req *wreq = NULL; | 
|  | struct cfg80211_scan_request *creq; | 
|  | int i, err, n_channels = 0; | 
|  | enum nl80211_band band; | 
|  |  | 
|  | if (!netif_running(dev)) | 
|  | return -ENETDOWN; | 
|  |  | 
|  | if (wrqu->data.length == sizeof(struct iw_scan_req)) | 
|  | wreq = (struct iw_scan_req *)extra; | 
|  |  | 
|  | rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | 
|  |  | 
|  | if (IS_ERR(rdev)) | 
|  | return PTR_ERR(rdev); | 
|  |  | 
|  | if (rdev->scan_req || rdev->scan_msg) | 
|  | return -EBUSY; | 
|  |  | 
|  | wiphy = &rdev->wiphy; | 
|  |  | 
|  | /* Determine number of channels, needed to allocate creq */ | 
|  | if (wreq && wreq->num_channels) | 
|  | n_channels = wreq->num_channels; | 
|  | else | 
|  | n_channels = ieee80211_get_num_supported_channels(wiphy); | 
|  |  | 
|  | creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) + | 
|  | n_channels * sizeof(void *), | 
|  | GFP_ATOMIC); | 
|  | if (!creq) | 
|  | return -ENOMEM; | 
|  |  | 
|  | creq->wiphy = wiphy; | 
|  | creq->wdev = dev->ieee80211_ptr; | 
|  | /* SSIDs come after channels */ | 
|  | creq->ssids = (void *)&creq->channels[n_channels]; | 
|  | creq->n_channels = n_channels; | 
|  | creq->n_ssids = 1; | 
|  | creq->scan_start = jiffies; | 
|  |  | 
|  | /* translate "Scan on frequencies" request */ | 
|  | i = 0; | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | int j; | 
|  |  | 
|  | if (!wiphy->bands[band]) | 
|  | continue; | 
|  |  | 
|  | for (j = 0; j < wiphy->bands[band]->n_channels; j++) { | 
|  | /* ignore disabled channels */ | 
|  | if (wiphy->bands[band]->channels[j].flags & | 
|  | IEEE80211_CHAN_DISABLED) | 
|  | continue; | 
|  |  | 
|  | /* If we have a wireless request structure and the | 
|  | * wireless request specifies frequencies, then search | 
|  | * for the matching hardware channel. | 
|  | */ | 
|  | if (wreq && wreq->num_channels) { | 
|  | int k; | 
|  | int wiphy_freq = wiphy->bands[band]->channels[j].center_freq; | 
|  | for (k = 0; k < wreq->num_channels; k++) { | 
|  | struct iw_freq *freq = | 
|  | &wreq->channel_list[k]; | 
|  | int wext_freq = | 
|  | cfg80211_wext_freq(freq); | 
|  |  | 
|  | if (wext_freq == wiphy_freq) | 
|  | goto wext_freq_found; | 
|  | } | 
|  | goto wext_freq_not_found; | 
|  | } | 
|  |  | 
|  | wext_freq_found: | 
|  | creq->channels[i] = &wiphy->bands[band]->channels[j]; | 
|  | i++; | 
|  | wext_freq_not_found: ; | 
|  | } | 
|  | } | 
|  | /* No channels found? */ | 
|  | if (!i) { | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Set real number of channels specified in creq->channels[] */ | 
|  | creq->n_channels = i; | 
|  |  | 
|  | /* translate "Scan for SSID" request */ | 
|  | if (wreq) { | 
|  | if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { | 
|  | if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len); | 
|  | creq->ssids[0].ssid_len = wreq->essid_len; | 
|  | } | 
|  | if (wreq->scan_type == IW_SCAN_TYPE_PASSIVE) | 
|  | creq->n_ssids = 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < NUM_NL80211_BANDS; i++) | 
|  | if (wiphy->bands[i]) | 
|  | creq->rates[i] = (1 << wiphy->bands[i]->n_bitrates) - 1; | 
|  |  | 
|  | eth_broadcast_addr(creq->bssid); | 
|  |  | 
|  | wiphy_lock(&rdev->wiphy); | 
|  |  | 
|  | rdev->scan_req = creq; | 
|  | err = rdev_scan(rdev, creq); | 
|  | if (err) { | 
|  | rdev->scan_req = NULL; | 
|  | /* creq will be freed below */ | 
|  | } else { | 
|  | nl80211_send_scan_start(rdev, dev->ieee80211_ptr); | 
|  | /* creq now owned by driver */ | 
|  | creq = NULL; | 
|  | dev_hold(dev); | 
|  | } | 
|  | wiphy_unlock(&rdev->wiphy); | 
|  | out: | 
|  | kfree(creq); | 
|  | return err; | 
|  | } | 
|  | EXPORT_WEXT_HANDLER(cfg80211_wext_siwscan); | 
|  |  | 
|  | static char *ieee80211_scan_add_ies(struct iw_request_info *info, | 
|  | const struct cfg80211_bss_ies *ies, | 
|  | char *current_ev, char *end_buf) | 
|  | { | 
|  | const u8 *pos, *end, *next; | 
|  | struct iw_event iwe; | 
|  |  | 
|  | if (!ies) | 
|  | return current_ev; | 
|  |  | 
|  | /* | 
|  | * If needed, fragment the IEs buffer (at IE boundaries) into short | 
|  | * enough fragments to fit into IW_GENERIC_IE_MAX octet messages. | 
|  | */ | 
|  | pos = ies->data; | 
|  | end = pos + ies->len; | 
|  |  | 
|  | while (end - pos > IW_GENERIC_IE_MAX) { | 
|  | next = pos + 2 + pos[1]; | 
|  | while (next + 2 + next[1] - pos < IW_GENERIC_IE_MAX) | 
|  | next = next + 2 + next[1]; | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = next - pos; | 
|  | current_ev = iwe_stream_add_point_check(info, current_ev, | 
|  | end_buf, &iwe, | 
|  | (void *)pos); | 
|  | if (IS_ERR(current_ev)) | 
|  | return current_ev; | 
|  | pos = next; | 
|  | } | 
|  |  | 
|  | if (end > pos) { | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = end - pos; | 
|  | current_ev = iwe_stream_add_point_check(info, current_ev, | 
|  | end_buf, &iwe, | 
|  | (void *)pos); | 
|  | if (IS_ERR(current_ev)) | 
|  | return current_ev; | 
|  | } | 
|  |  | 
|  | return current_ev; | 
|  | } | 
|  |  | 
|  | static char * | 
|  | ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, | 
|  | struct cfg80211_internal_bss *bss, char *current_ev, | 
|  | char *end_buf) | 
|  | { | 
|  | const struct cfg80211_bss_ies *ies; | 
|  | struct iw_event iwe; | 
|  | const u8 *ie; | 
|  | u8 buf[50]; | 
|  | u8 *cfg, *p, *tmp; | 
|  | int rem, i, sig; | 
|  | bool ismesh = false; | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWAP; | 
|  | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(iwe.u.ap_addr.sa_data, bss->pub.bssid, ETH_ALEN); | 
|  | current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | 
|  | IW_EV_ADDR_LEN); | 
|  | if (IS_ERR(current_ev)) | 
|  | return current_ev; | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWFREQ; | 
|  | iwe.u.freq.m = ieee80211_frequency_to_channel(bss->pub.channel->center_freq); | 
|  | iwe.u.freq.e = 0; | 
|  | current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | 
|  | IW_EV_FREQ_LEN); | 
|  | if (IS_ERR(current_ev)) | 
|  | return current_ev; | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWFREQ; | 
|  | iwe.u.freq.m = bss->pub.channel->center_freq; | 
|  | iwe.u.freq.e = 6; | 
|  | current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | 
|  | IW_EV_FREQ_LEN); | 
|  | if (IS_ERR(current_ev)) | 
|  | return current_ev; | 
|  |  | 
|  | if (wiphy->signal_type != CFG80211_SIGNAL_TYPE_NONE) { | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = IWEVQUAL; | 
|  | iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED | | 
|  | IW_QUAL_NOISE_INVALID | | 
|  | IW_QUAL_QUAL_UPDATED; | 
|  | switch (wiphy->signal_type) { | 
|  | case CFG80211_SIGNAL_TYPE_MBM: | 
|  | sig = bss->pub.signal / 100; | 
|  | iwe.u.qual.level = sig; | 
|  | iwe.u.qual.updated |= IW_QUAL_DBM; | 
|  | if (sig < -110)		/* rather bad */ | 
|  | sig = -110; | 
|  | else if (sig > -40)	/* perfect */ | 
|  | sig = -40; | 
|  | /* will give a range of 0 .. 70 */ | 
|  | iwe.u.qual.qual = sig + 110; | 
|  | break; | 
|  | case CFG80211_SIGNAL_TYPE_UNSPEC: | 
|  | iwe.u.qual.level = bss->pub.signal; | 
|  | /* will give range 0 .. 100 */ | 
|  | iwe.u.qual.qual = bss->pub.signal; | 
|  | break; | 
|  | default: | 
|  | /* not reached */ | 
|  | break; | 
|  | } | 
|  | current_ev = iwe_stream_add_event_check(info, current_ev, | 
|  | end_buf, &iwe, | 
|  | IW_EV_QUAL_LEN); | 
|  | if (IS_ERR(current_ev)) | 
|  | return current_ev; | 
|  | } | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWENCODE; | 
|  | if (bss->pub.capability & WLAN_CAPABILITY_PRIVACY) | 
|  | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
|  | else | 
|  | iwe.u.data.flags = IW_ENCODE_DISABLED; | 
|  | iwe.u.data.length = 0; | 
|  | current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, | 
|  | &iwe, ""); | 
|  | if (IS_ERR(current_ev)) | 
|  | return current_ev; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | ies = rcu_dereference(bss->pub.ies); | 
|  | rem = ies->len; | 
|  | ie = ies->data; | 
|  |  | 
|  | while (rem >= 2) { | 
|  | /* invalid data */ | 
|  | if (ie[1] > rem - 2) | 
|  | break; | 
|  |  | 
|  | switch (ie[0]) { | 
|  | case WLAN_EID_SSID: | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWESSID; | 
|  | iwe.u.data.length = ie[1]; | 
|  | iwe.u.data.flags = 1; | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, &iwe, | 
|  | (u8 *)ie + 2); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | break; | 
|  | case WLAN_EID_MESH_ID: | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWESSID; | 
|  | iwe.u.data.length = ie[1]; | 
|  | iwe.u.data.flags = 1; | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, &iwe, | 
|  | (u8 *)ie + 2); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | break; | 
|  | case WLAN_EID_MESH_CONFIG: | 
|  | ismesh = true; | 
|  | if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) | 
|  | break; | 
|  | cfg = (u8 *)ie + 2; | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | sprintf(buf, "Mesh Network Path Selection Protocol ID: " | 
|  | "0x%02X", cfg[0]); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | sprintf(buf, "Path Selection Metric ID: 0x%02X", | 
|  | cfg[1]); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | sprintf(buf, "Congestion Control Mode ID: 0x%02X", | 
|  | cfg[2]); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | sprintf(buf, "Synchronization ID: 0x%02X", cfg[3]); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | sprintf(buf, "Authentication ID: 0x%02X", cfg[4]); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | sprintf(buf, "Formation Info: 0x%02X", cfg[5]); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | sprintf(buf, "Capabilities: 0x%02X", cfg[6]); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, | 
|  | current_ev, | 
|  | end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | break; | 
|  | case WLAN_EID_SUPP_RATES: | 
|  | case WLAN_EID_EXT_SUPP_RATES: | 
|  | /* display all supported rates in readable format */ | 
|  | p = current_ev + iwe_stream_lcp_len(info); | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWRATE; | 
|  | /* Those two flags are ignored... */ | 
|  | iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | 
|  |  | 
|  | for (i = 0; i < ie[1]; i++) { | 
|  | iwe.u.bitrate.value = | 
|  | ((ie[i + 2] & 0x7f) * 500000); | 
|  | tmp = p; | 
|  | p = iwe_stream_add_value(info, current_ev, p, | 
|  | end_buf, &iwe, | 
|  | IW_EV_PARAM_LEN); | 
|  | if (p == tmp) { | 
|  | current_ev = ERR_PTR(-E2BIG); | 
|  | goto unlock; | 
|  | } | 
|  | } | 
|  | current_ev = p; | 
|  | break; | 
|  | } | 
|  | rem -= ie[1] + 2; | 
|  | ie += ie[1] + 2; | 
|  | } | 
|  |  | 
|  | if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) || | 
|  | ismesh) { | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = SIOCGIWMODE; | 
|  | if (ismesh) | 
|  | iwe.u.mode = IW_MODE_MESH; | 
|  | else if (bss->pub.capability & WLAN_CAPABILITY_ESS) | 
|  | iwe.u.mode = IW_MODE_MASTER; | 
|  | else | 
|  | iwe.u.mode = IW_MODE_ADHOC; | 
|  | current_ev = iwe_stream_add_event_check(info, current_ev, | 
|  | end_buf, &iwe, | 
|  | IW_EV_UINT_LEN); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf)); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, | 
|  | &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | sprintf(buf, " Last beacon: %ums ago", | 
|  | elapsed_jiffies_msecs(bss->ts)); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point_check(info, current_ev, | 
|  | end_buf, &iwe, buf); | 
|  | if (IS_ERR(current_ev)) | 
|  | goto unlock; | 
|  |  | 
|  | current_ev = ieee80211_scan_add_ies(info, ies, current_ev, end_buf); | 
|  |  | 
|  | unlock: | 
|  | rcu_read_unlock(); | 
|  | return current_ev; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int ieee80211_scan_results(struct cfg80211_registered_device *rdev, | 
|  | struct iw_request_info *info, | 
|  | char *buf, size_t len) | 
|  | { | 
|  | char *current_ev = buf; | 
|  | char *end_buf = buf + len; | 
|  | struct cfg80211_internal_bss *bss; | 
|  | int err = 0; | 
|  |  | 
|  | spin_lock_bh(&rdev->bss_lock); | 
|  | cfg80211_bss_expire(rdev); | 
|  |  | 
|  | list_for_each_entry(bss, &rdev->bss_list, list) { | 
|  | if (buf + len - current_ev <= IW_EV_ADDR_LEN) { | 
|  | err = -E2BIG; | 
|  | break; | 
|  | } | 
|  | current_ev = ieee80211_bss(&rdev->wiphy, info, bss, | 
|  | current_ev, end_buf); | 
|  | if (IS_ERR(current_ev)) { | 
|  | err = PTR_ERR(current_ev); | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&rdev->bss_lock); | 
|  |  | 
|  | if (err) | 
|  | return err; | 
|  | return current_ev - buf; | 
|  | } | 
|  |  | 
|  |  | 
|  | int cfg80211_wext_giwscan(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *data, char *extra) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | int res; | 
|  |  | 
|  | if (!netif_running(dev)) | 
|  | return -ENETDOWN; | 
|  |  | 
|  | rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | 
|  |  | 
|  | if (IS_ERR(rdev)) | 
|  | return PTR_ERR(rdev); | 
|  |  | 
|  | if (rdev->scan_req || rdev->scan_msg) | 
|  | return -EAGAIN; | 
|  |  | 
|  | res = ieee80211_scan_results(rdev, info, extra, data->length); | 
|  | data->length = 0; | 
|  | if (res >= 0) { | 
|  | data->length = res; | 
|  | res = 0; | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  | EXPORT_WEXT_HANDLER(cfg80211_wext_giwscan); | 
|  | #endif |