|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | // | 
|  | // Copyright (c) 2016 MediaTek Inc. | 
|  | // Author: Chen Zhong <chen.zhong@mediatek.com> | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/mfd/mt6397/core.h> | 
|  | #include <linux/mfd/mt6323/registers.h> | 
|  | #include <linux/regulator/driver.h> | 
|  | #include <linux/regulator/machine.h> | 
|  | #include <linux/regulator/mt6323-regulator.h> | 
|  | #include <linux/regulator/of_regulator.h> | 
|  |  | 
|  | #define MT6323_LDO_MODE_NORMAL	0 | 
|  | #define MT6323_LDO_MODE_LP	1 | 
|  |  | 
|  | /* | 
|  | * MT6323 regulators' information | 
|  | * | 
|  | * @desc: standard fields of regulator description. | 
|  | * @qi: Mask for query enable signal status of regulators | 
|  | * @vselon_reg: Register sections for hardware control mode of bucks | 
|  | * @vselctrl_reg: Register for controlling the buck control mode. | 
|  | * @vselctrl_mask: Mask for query buck's voltage control mode. | 
|  | */ | 
|  | struct mt6323_regulator_info { | 
|  | struct regulator_desc desc; | 
|  | u32 qi; | 
|  | u32 vselon_reg; | 
|  | u32 vselctrl_reg; | 
|  | u32 vselctrl_mask; | 
|  | u32 modeset_reg; | 
|  | u32 modeset_mask; | 
|  | }; | 
|  |  | 
|  | #define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\ | 
|  | vosel, vosel_mask, voselon, vosel_ctrl)			\ | 
|  | [MT6323_ID_##vreg] = {							\ | 
|  | .desc = {							\ | 
|  | .name = #vreg,						\ | 
|  | .of_match = of_match_ptr(match),			\ | 
|  | .ops = &mt6323_volt_range_ops,				\ | 
|  | .type = REGULATOR_VOLTAGE,				\ | 
|  | .id = MT6323_ID_##vreg,					\ | 
|  | .owner = THIS_MODULE,					\ | 
|  | .n_voltages = (max - min)/step + 1,			\ | 
|  | .linear_ranges = volt_ranges,				\ | 
|  | .n_linear_ranges = ARRAY_SIZE(volt_ranges),		\ | 
|  | .vsel_reg = vosel,					\ | 
|  | .vsel_mask = vosel_mask,				\ | 
|  | .enable_reg = enreg,					\ | 
|  | .enable_mask = BIT(0),					\ | 
|  | },								\ | 
|  | .qi = BIT(13),							\ | 
|  | .vselon_reg = voselon,						\ | 
|  | .vselctrl_reg = vosel_ctrl,					\ | 
|  | .vselctrl_mask = BIT(1),					\ | 
|  | } | 
|  |  | 
|  | #define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\ | 
|  | vosel_mask, _modeset_reg, _modeset_mask)		\ | 
|  | [MT6323_ID_##vreg] = {							\ | 
|  | .desc = {							\ | 
|  | .name = #vreg,						\ | 
|  | .of_match = of_match_ptr(match),			\ | 
|  | .ops = &mt6323_volt_table_ops,				\ | 
|  | .type = REGULATOR_VOLTAGE,				\ | 
|  | .id = MT6323_ID_##vreg,					\ | 
|  | .owner = THIS_MODULE,					\ | 
|  | .n_voltages = ARRAY_SIZE(ldo_volt_table),		\ | 
|  | .volt_table = ldo_volt_table,				\ | 
|  | .vsel_reg = vosel,					\ | 
|  | .vsel_mask = vosel_mask,				\ | 
|  | .enable_reg = enreg,					\ | 
|  | .enable_mask = BIT(enbit),				\ | 
|  | },								\ | 
|  | .qi = BIT(15),							\ | 
|  | .modeset_reg = _modeset_reg,					\ | 
|  | .modeset_mask = _modeset_mask,					\ | 
|  | } | 
|  |  | 
|  | #define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt,		\ | 
|  | _modeset_reg, _modeset_mask)				\ | 
|  | [MT6323_ID_##vreg] = {							\ | 
|  | .desc = {							\ | 
|  | .name = #vreg,						\ | 
|  | .of_match = of_match_ptr(match),			\ | 
|  | .ops = &mt6323_volt_fixed_ops,				\ | 
|  | .type = REGULATOR_VOLTAGE,				\ | 
|  | .id = MT6323_ID_##vreg,					\ | 
|  | .owner = THIS_MODULE,					\ | 
|  | .n_voltages = 1,					\ | 
|  | .enable_reg = enreg,					\ | 
|  | .enable_mask = BIT(enbit),				\ | 
|  | .min_uV = volt,						\ | 
|  | },								\ | 
|  | .qi = BIT(15),							\ | 
|  | .modeset_reg = _modeset_reg,					\ | 
|  | .modeset_mask = _modeset_mask,					\ | 
|  | } | 
|  |  | 
|  | static const struct linear_range buck_volt_range1[] = { | 
|  | REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), | 
|  | }; | 
|  |  | 
|  | static const struct linear_range buck_volt_range2[] = { | 
|  | REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), | 
|  | }; | 
|  |  | 
|  | static const struct linear_range buck_volt_range3[] = { | 
|  | REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table1[] = { | 
|  | 3300000, 3400000, 3500000, 3600000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table2[] = { | 
|  | 1500000, 1800000, 2500000, 2800000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table3[] = { | 
|  | 1800000, 3300000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table4[] = { | 
|  | 3000000, 3300000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table5[] = { | 
|  | 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table6[] = { | 
|  | 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table7[] = { | 
|  | 1200000, 1300000, 1500000, 1800000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table8[] = { | 
|  | 1800000, 3000000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table9[] = { | 
|  | 1200000, 1350000, 1500000, 1800000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int ldo_volt_table10[] = { | 
|  | 1200000, 1300000, 1500000, 1800000, | 
|  | }; | 
|  |  | 
|  | static int mt6323_get_status(struct regulator_dev *rdev) | 
|  | { | 
|  | int ret; | 
|  | u32 regval; | 
|  | struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); | 
|  |  | 
|  | ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); | 
|  | if (ret != 0) { | 
|  | dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; | 
|  | } | 
|  |  | 
|  | static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) | 
|  | { | 
|  | int ret, val = 0; | 
|  | struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); | 
|  |  | 
|  | if (!info->modeset_mask) { | 
|  | dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", | 
|  | info->desc.name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | switch (mode) { | 
|  | case REGULATOR_MODE_STANDBY: | 
|  | val = MT6323_LDO_MODE_LP; | 
|  | break; | 
|  | case REGULATOR_MODE_NORMAL: | 
|  | val = MT6323_LDO_MODE_NORMAL; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | val <<= ffs(info->modeset_mask) - 1; | 
|  |  | 
|  | ret = regmap_update_bits(rdev->regmap, info->modeset_reg, | 
|  | info->modeset_mask, val); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) | 
|  | { | 
|  | unsigned int val; | 
|  | unsigned int mode; | 
|  | int ret; | 
|  | struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); | 
|  |  | 
|  | if (!info->modeset_mask) { | 
|  | dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", | 
|  | info->desc.name); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = regmap_read(rdev->regmap, info->modeset_reg, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val &= info->modeset_mask; | 
|  | val >>= ffs(info->modeset_mask) - 1; | 
|  |  | 
|  | if (val & 0x1) | 
|  | mode = REGULATOR_MODE_STANDBY; | 
|  | else | 
|  | mode = REGULATOR_MODE_NORMAL; | 
|  |  | 
|  | return mode; | 
|  | } | 
|  |  | 
|  | static const struct regulator_ops mt6323_volt_range_ops = { | 
|  | .list_voltage = regulator_list_voltage_linear_range, | 
|  | .map_voltage = regulator_map_voltage_linear_range, | 
|  | .set_voltage_sel = regulator_set_voltage_sel_regmap, | 
|  | .get_voltage_sel = regulator_get_voltage_sel_regmap, | 
|  | .set_voltage_time_sel = regulator_set_voltage_time_sel, | 
|  | .enable = regulator_enable_regmap, | 
|  | .disable = regulator_disable_regmap, | 
|  | .is_enabled = regulator_is_enabled_regmap, | 
|  | .get_status = mt6323_get_status, | 
|  | }; | 
|  |  | 
|  | static const struct regulator_ops mt6323_volt_table_ops = { | 
|  | .list_voltage = regulator_list_voltage_table, | 
|  | .map_voltage = regulator_map_voltage_iterate, | 
|  | .set_voltage_sel = regulator_set_voltage_sel_regmap, | 
|  | .get_voltage_sel = regulator_get_voltage_sel_regmap, | 
|  | .set_voltage_time_sel = regulator_set_voltage_time_sel, | 
|  | .enable = regulator_enable_regmap, | 
|  | .disable = regulator_disable_regmap, | 
|  | .is_enabled = regulator_is_enabled_regmap, | 
|  | .get_status = mt6323_get_status, | 
|  | .set_mode = mt6323_ldo_set_mode, | 
|  | .get_mode = mt6323_ldo_get_mode, | 
|  | }; | 
|  |  | 
|  | static const struct regulator_ops mt6323_volt_fixed_ops = { | 
|  | .list_voltage = regulator_list_voltage_linear, | 
|  | .enable = regulator_enable_regmap, | 
|  | .disable = regulator_disable_regmap, | 
|  | .is_enabled = regulator_is_enabled_regmap, | 
|  | .get_status = mt6323_get_status, | 
|  | .set_mode = mt6323_ldo_set_mode, | 
|  | .get_mode = mt6323_ldo_get_mode, | 
|  | }; | 
|  |  | 
|  | /* The array is indexed by id(MT6323_ID_XXX) */ | 
|  | static struct mt6323_regulator_info mt6323_regulators[] = { | 
|  | MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, | 
|  | buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, | 
|  | MT6323_VPROC_CON10, MT6323_VPROC_CON5), | 
|  | MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, | 
|  | buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, | 
|  | MT6323_VSYS_CON10, MT6323_VSYS_CON5), | 
|  | MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, | 
|  | buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, | 
|  | 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), | 
|  | MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, | 
|  | MT6323_ANALDO_CON1, 0x2), | 
|  | MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, | 
|  | MT6323_ANALDO_CON20, 0x2), | 
|  | MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, | 
|  | MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, | 
|  | MT6323_ANALDO_CON21, 0x2), | 
|  | MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, | 
|  | MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, | 
|  | MT6323_ANALDO_CON21, 0x2), | 
|  | MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, | 
|  | MT6323_ANALDO_CON2, 0x2), | 
|  | MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, | 
|  | MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), | 
|  | MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, | 
|  | MT6323_DIGLDO_CON0, 0x2), | 
|  | MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, | 
|  | MT6323_DIGLDO_CON2, 0x2), | 
|  | MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, | 
|  | MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, | 
|  | MT6323_DIGLDO_CON3, 0x2), | 
|  | MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, | 
|  | MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, | 
|  | MT6323_DIGLDO_CON5, 0x2), | 
|  | MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, | 
|  | MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, | 
|  | MT6323_DIGLDO_CON6, 0x2), | 
|  | MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, | 
|  | MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, | 
|  | MT6323_DIGLDO_CON7, 0x2), | 
|  | MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, | 
|  | MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, | 
|  | MT6323_DIGLDO_CON8, 0x2), | 
|  | MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, | 
|  | MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, | 
|  | MT6323_DIGLDO_CON9, 0x2), | 
|  | MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, | 
|  | MT6323_DIGLDO_CON11, 0x2), | 
|  | MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, | 
|  | MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, | 
|  | MT6323_DIGLDO_CON13, 0x2), | 
|  | MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, | 
|  | MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, | 
|  | MT6323_DIGLDO_CON14, 0x2), | 
|  | MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, | 
|  | -1, 0), | 
|  | MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, | 
|  | MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, | 
|  | MT6323_DIGLDO_CON31, 0x2), | 
|  | MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, | 
|  | MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, | 
|  | MT6323_DIGLDO_CON39, 0x2), | 
|  | MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, | 
|  | MT6323_DIGLDO_CON45, 0x2), | 
|  | MT6323_LDO("ldo_vm", VM, ldo_volt_table9, | 
|  | MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, | 
|  | MT6323_DIGLDO_CON47, 0x2), | 
|  | MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, | 
|  | MT6323_DIGLDO_CON49, 0x2), | 
|  | MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, | 
|  | MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, | 
|  | MT6323_DIGLDO_CON51, 0x2), | 
|  | MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, | 
|  | MT6323_DIGLDO_CON53, 0x2), | 
|  | }; | 
|  |  | 
|  | static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) | 
|  | { | 
|  | struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); | 
|  | int i; | 
|  | u32 regval; | 
|  |  | 
|  | for (i = 0; i < MT6323_MAX_REGULATOR; i++) { | 
|  | if (mt6323_regulators[i].vselctrl_reg) { | 
|  | if (regmap_read(mt6323->regmap, | 
|  | mt6323_regulators[i].vselctrl_reg, | 
|  | ®val) < 0) { | 
|  | dev_err(&pdev->dev, | 
|  | "Failed to read buck ctrl\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (regval & mt6323_regulators[i].vselctrl_mask) { | 
|  | mt6323_regulators[i].desc.vsel_reg = | 
|  | mt6323_regulators[i].vselon_reg; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mt6323_regulator_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); | 
|  | struct regulator_config config = {}; | 
|  | struct regulator_dev *rdev; | 
|  | int i; | 
|  | u32 reg_value; | 
|  |  | 
|  | /* Query buck controller to select activated voltage register part */ | 
|  | if (mt6323_set_buck_vosel_reg(pdev)) | 
|  | return -EIO; | 
|  |  | 
|  | /* Read PMIC chip revision to update constraints and voltage table */ | 
|  | if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { | 
|  | dev_err(&pdev->dev, "Failed to read Chip ID\n"); | 
|  | return -EIO; | 
|  | } | 
|  | dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); | 
|  |  | 
|  | for (i = 0; i < MT6323_MAX_REGULATOR; i++) { | 
|  | config.dev = &pdev->dev; | 
|  | config.driver_data = &mt6323_regulators[i]; | 
|  | config.regmap = mt6323->regmap; | 
|  | rdev = devm_regulator_register(&pdev->dev, | 
|  | &mt6323_regulators[i].desc, &config); | 
|  | if (IS_ERR(rdev)) { | 
|  | dev_err(&pdev->dev, "failed to register %s\n", | 
|  | mt6323_regulators[i].desc.name); | 
|  | return PTR_ERR(rdev); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct platform_device_id mt6323_platform_ids[] = { | 
|  | {"mt6323-regulator", 0}, | 
|  | { /* sentinel */ }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); | 
|  |  | 
|  | static struct platform_driver mt6323_regulator_driver = { | 
|  | .driver = { | 
|  | .name = "mt6323-regulator", | 
|  | }, | 
|  | .probe = mt6323_regulator_probe, | 
|  | .id_table = mt6323_platform_ids, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(mt6323_regulator_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); | 
|  | MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6323 PMIC"); | 
|  | MODULE_LICENSE("GPL v2"); |