| // SPDX-License-Identifier: MIT | 
 | /* | 
 |  * Copyright © 2020,2021 Intel Corporation | 
 |  */ | 
 |  | 
 | #include "i915_drv.h" | 
 | #include "intel_step.h" | 
 |  | 
 | /* | 
 |  * Some platforms have unusual ways of mapping PCI revision ID to GT/display | 
 |  * steppings.  E.g., in some cases a higher PCI revision may translate to a | 
 |  * lower stepping of the GT and/or display IP.  This file provides lookup | 
 |  * tables to map the PCI revision into a standard set of stepping values that | 
 |  * can be compared numerically. | 
 |  * | 
 |  * Also note that some revisions/steppings may have been set aside as | 
 |  * placeholders but never materialized in real hardware; in those cases there | 
 |  * may be jumps in the revision IDs or stepping values in the tables below. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Some platforms always have the same stepping value for GT and display; | 
 |  * use a macro to define these to make it easier to identify the platforms | 
 |  * where the two steppings can deviate. | 
 |  */ | 
 | #define COMMON_STEP(x)  .gt_step = STEP_##x, .display_step = STEP_##x | 
 |  | 
 | static const struct intel_step_info skl_revids[] = { | 
 | 	[0x6] = { COMMON_STEP(G0) }, | 
 | 	[0x7] = { COMMON_STEP(H0) }, | 
 | 	[0x9] = { COMMON_STEP(J0) }, | 
 | 	[0xA] = { COMMON_STEP(I1) }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info kbl_revids[] = { | 
 | 	[1] = { .gt_step = STEP_B0, .display_step = STEP_B0 }, | 
 | 	[2] = { .gt_step = STEP_C0, .display_step = STEP_B0 }, | 
 | 	[3] = { .gt_step = STEP_D0, .display_step = STEP_B0 }, | 
 | 	[4] = { .gt_step = STEP_F0, .display_step = STEP_C0 }, | 
 | 	[5] = { .gt_step = STEP_C0, .display_step = STEP_B1 }, | 
 | 	[6] = { .gt_step = STEP_D1, .display_step = STEP_B1 }, | 
 | 	[7] = { .gt_step = STEP_G0, .display_step = STEP_C0 }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info bxt_revids[] = { | 
 | 	[0xA] = { COMMON_STEP(C0) }, | 
 | 	[0xB] = { COMMON_STEP(C0) }, | 
 | 	[0xC] = { COMMON_STEP(D0) }, | 
 | 	[0xD] = { COMMON_STEP(E0) }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info glk_revids[] = { | 
 | 	[3] = { COMMON_STEP(B0) }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info icl_revids[] = { | 
 | 	[7] = { COMMON_STEP(D0) }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info jsl_ehl_revids[] = { | 
 | 	[0] = { COMMON_STEP(A0) }, | 
 | 	[1] = { COMMON_STEP(B0) }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info tgl_uy_revids[] = { | 
 | 	[0] = { .gt_step = STEP_A0, .display_step = STEP_A0 }, | 
 | 	[1] = { .gt_step = STEP_B0, .display_step = STEP_C0 }, | 
 | 	[2] = { .gt_step = STEP_B1, .display_step = STEP_C0 }, | 
 | 	[3] = { .gt_step = STEP_C0, .display_step = STEP_D0 }, | 
 | }; | 
 |  | 
 | /* Same GT stepping between tgl_uy_revids and tgl_revids don't mean the same HW */ | 
 | static const struct intel_step_info tgl_revids[] = { | 
 | 	[0] = { .gt_step = STEP_A0, .display_step = STEP_B0 }, | 
 | 	[1] = { .gt_step = STEP_B0, .display_step = STEP_D0 }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info rkl_revids[] = { | 
 | 	[0] = { COMMON_STEP(A0) }, | 
 | 	[1] = { COMMON_STEP(B0) }, | 
 | 	[4] = { COMMON_STEP(C0) }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info dg1_revids[] = { | 
 | 	[0] = { COMMON_STEP(A0) }, | 
 | 	[1] = { COMMON_STEP(B0) }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info adls_revids[] = { | 
 | 	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_A0 }, | 
 | 	[0x1] = { .gt_step = STEP_A0, .display_step = STEP_A2 }, | 
 | 	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_B0 }, | 
 | 	[0x8] = { .gt_step = STEP_C0, .display_step = STEP_B0 }, | 
 | 	[0xC] = { .gt_step = STEP_D0, .display_step = STEP_C0 }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info adlp_revids[] = { | 
 | 	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_A0 }, | 
 | 	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_B0 }, | 
 | 	[0x8] = { .gt_step = STEP_C0, .display_step = STEP_C0 }, | 
 | 	[0xC] = { .gt_step = STEP_C0, .display_step = STEP_D0 }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info xehpsdv_revids[] = { | 
 | 	[0x0] = { .gt_step = STEP_A0 }, | 
 | 	[0x1] = { .gt_step = STEP_A1 }, | 
 | 	[0x4] = { .gt_step = STEP_B0 }, | 
 | 	[0x8] = { .gt_step = STEP_C0 }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info dg2_g10_revid_step_tbl[] = { | 
 | 	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_A0 }, | 
 | 	[0x1] = { .gt_step = STEP_A1, .display_step = STEP_A0 }, | 
 | 	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_B0 }, | 
 | 	[0x8] = { .gt_step = STEP_C0, .display_step = STEP_C0 }, | 
 | }; | 
 |  | 
 | static const struct intel_step_info dg2_g11_revid_step_tbl[] = { | 
 | 	[0x0] = { .gt_step = STEP_A0, .display_step = STEP_B0 }, | 
 | 	[0x4] = { .gt_step = STEP_B0, .display_step = STEP_C0 }, | 
 | 	[0x5] = { .gt_step = STEP_B1, .display_step = STEP_C0 }, | 
 | }; | 
 |  | 
 | void intel_step_init(struct drm_i915_private *i915) | 
 | { | 
 | 	const struct intel_step_info *revids = NULL; | 
 | 	int size = 0; | 
 | 	int revid = INTEL_REVID(i915); | 
 | 	struct intel_step_info step = {}; | 
 |  | 
 | 	if (IS_DG2_G10(i915)) { | 
 | 		revids = dg2_g10_revid_step_tbl; | 
 | 		size = ARRAY_SIZE(dg2_g10_revid_step_tbl); | 
 | 	} else if (IS_DG2_G11(i915)) { | 
 | 		revids = dg2_g11_revid_step_tbl; | 
 | 		size = ARRAY_SIZE(dg2_g11_revid_step_tbl); | 
 | 	} else if (IS_XEHPSDV(i915)) { | 
 | 		revids = xehpsdv_revids; | 
 | 		size = ARRAY_SIZE(xehpsdv_revids); | 
 | 	} else if (IS_ALDERLAKE_P(i915)) { | 
 | 		revids = adlp_revids; | 
 | 		size = ARRAY_SIZE(adlp_revids); | 
 | 	} else if (IS_ALDERLAKE_S(i915)) { | 
 | 		revids = adls_revids; | 
 | 		size = ARRAY_SIZE(adls_revids); | 
 | 	} else if (IS_DG1(i915)) { | 
 | 		revids = dg1_revids; | 
 | 		size = ARRAY_SIZE(dg1_revids); | 
 | 	} else if (IS_ROCKETLAKE(i915)) { | 
 | 		revids = rkl_revids; | 
 | 		size = ARRAY_SIZE(rkl_revids); | 
 | 	} else if (IS_TGL_U(i915) || IS_TGL_Y(i915)) { | 
 | 		revids = tgl_uy_revids; | 
 | 		size = ARRAY_SIZE(tgl_uy_revids); | 
 | 	} else if (IS_TIGERLAKE(i915)) { | 
 | 		revids = tgl_revids; | 
 | 		size = ARRAY_SIZE(tgl_revids); | 
 | 	} else if (IS_JSL_EHL(i915)) { | 
 | 		revids = jsl_ehl_revids; | 
 | 		size = ARRAY_SIZE(jsl_ehl_revids); | 
 | 	} else if (IS_ICELAKE(i915)) { | 
 | 		revids = icl_revids; | 
 | 		size = ARRAY_SIZE(icl_revids); | 
 | 	} else if (IS_GEMINILAKE(i915)) { | 
 | 		revids = glk_revids; | 
 | 		size = ARRAY_SIZE(glk_revids); | 
 | 	} else if (IS_BROXTON(i915)) { | 
 | 		revids = bxt_revids; | 
 | 		size = ARRAY_SIZE(bxt_revids); | 
 | 	} else if (IS_KABYLAKE(i915)) { | 
 | 		revids = kbl_revids; | 
 | 		size = ARRAY_SIZE(kbl_revids); | 
 | 	} else if (IS_SKYLAKE(i915)) { | 
 | 		revids = skl_revids; | 
 | 		size = ARRAY_SIZE(skl_revids); | 
 | 	} | 
 |  | 
 | 	/* Not using the stepping scheme for the platform yet. */ | 
 | 	if (!revids) | 
 | 		return; | 
 |  | 
 | 	if (revid < size && revids[revid].gt_step != STEP_NONE) { | 
 | 		step = revids[revid]; | 
 | 	} else { | 
 | 		drm_warn(&i915->drm, "Unknown revid 0x%02x\n", revid); | 
 |  | 
 | 		/* | 
 | 		 * If we hit a gap in the revid array, use the information for | 
 | 		 * the next revid. | 
 | 		 * | 
 | 		 * This may be wrong in all sorts of ways, especially if the | 
 | 		 * steppings in the array are not monotonically increasing, but | 
 | 		 * it's better than defaulting to 0. | 
 | 		 */ | 
 | 		while (revid < size && revids[revid].gt_step == STEP_NONE) | 
 | 			revid++; | 
 |  | 
 | 		if (revid < size) { | 
 | 			drm_dbg(&i915->drm, "Using steppings for revid 0x%02x\n", | 
 | 				revid); | 
 | 			step = revids[revid]; | 
 | 		} else { | 
 | 			drm_dbg(&i915->drm, "Using future steppings\n"); | 
 | 			step.gt_step = STEP_FUTURE; | 
 | 			step.display_step = STEP_FUTURE; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (drm_WARN_ON(&i915->drm, step.gt_step == STEP_NONE)) | 
 | 		return; | 
 |  | 
 | 	RUNTIME_INFO(i915)->step = step; | 
 | } | 
 |  | 
 | #define STEP_NAME_CASE(name)	\ | 
 | 	case STEP_##name:	\ | 
 | 		return #name; | 
 |  | 
 | const char *intel_step_name(enum intel_step step) | 
 | { | 
 | 	switch (step) { | 
 | 	STEP_NAME_LIST(STEP_NAME_CASE); | 
 |  | 
 | 	default: | 
 | 		return "**"; | 
 | 	} | 
 | } |