| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * OMAP3XXX L3 Interconnect Driver | 
 |  * | 
 |  * Copyright (C) 2011 Texas Corporation | 
 |  *	Felipe Balbi <balbi@ti.com> | 
 |  *	Santosh Shilimkar <santosh.shilimkar@ti.com> | 
 |  *	Sricharan <r.sricharan@ti.com> | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/io.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_device.h> | 
 |  | 
 | #include "omap_l3_smx.h" | 
 |  | 
 | static inline u64 omap3_l3_readll(void __iomem *base, u16 reg) | 
 | { | 
 | 	return __raw_readll(base + reg); | 
 | } | 
 |  | 
 | static inline void omap3_l3_writell(void __iomem *base, u16 reg, u64 value) | 
 | { | 
 | 	__raw_writell(value, base + reg); | 
 | } | 
 |  | 
 | static inline enum omap3_l3_code omap3_l3_decode_error_code(u64 error) | 
 | { | 
 | 	return (error & 0x0f000000) >> L3_ERROR_LOG_CODE; | 
 | } | 
 |  | 
 | static inline u32 omap3_l3_decode_addr(u64 error_addr) | 
 | { | 
 | 	return error_addr & 0xffffffff; | 
 | } | 
 |  | 
 | static inline unsigned omap3_l3_decode_cmd(u64 error) | 
 | { | 
 | 	return (error & 0x07) >> L3_ERROR_LOG_CMD; | 
 | } | 
 |  | 
 | static inline enum omap3_l3_initiator_id omap3_l3_decode_initid(u64 error) | 
 | { | 
 | 	return (error & 0xff00) >> L3_ERROR_LOG_INITID; | 
 | } | 
 |  | 
 | static inline unsigned omap3_l3_decode_req_info(u64 error) | 
 | { | 
 | 	return (error >> 32) & 0xffff; | 
 | } | 
 |  | 
 | static char *omap3_l3_code_string(u8 code) | 
 | { | 
 | 	switch (code) { | 
 | 	case OMAP_L3_CODE_NOERROR: | 
 | 		return "No Error"; | 
 | 	case OMAP_L3_CODE_UNSUP_CMD: | 
 | 		return "Unsupported Command"; | 
 | 	case OMAP_L3_CODE_ADDR_HOLE: | 
 | 		return "Address Hole"; | 
 | 	case OMAP_L3_CODE_PROTECT_VIOLATION: | 
 | 		return "Protection Violation"; | 
 | 	case OMAP_L3_CODE_IN_BAND_ERR: | 
 | 		return "In-band Error"; | 
 | 	case OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT: | 
 | 		return "Request Timeout Not Accepted"; | 
 | 	case OMAP_L3_CODE_REQ_TOUT_NO_RESP: | 
 | 		return "Request Timeout, no response"; | 
 | 	default: | 
 | 		return "UNKNOWN error"; | 
 | 	} | 
 | } | 
 |  | 
 | static char *omap3_l3_initiator_string(u8 initid) | 
 | { | 
 | 	switch (initid) { | 
 | 	case OMAP_L3_LCD: | 
 | 		return "LCD"; | 
 | 	case OMAP_L3_SAD2D: | 
 | 		return "SAD2D"; | 
 | 	case OMAP_L3_IA_MPU_SS_1: | 
 | 	case OMAP_L3_IA_MPU_SS_2: | 
 | 	case OMAP_L3_IA_MPU_SS_3: | 
 | 	case OMAP_L3_IA_MPU_SS_4: | 
 | 	case OMAP_L3_IA_MPU_SS_5: | 
 | 		return "MPU"; | 
 | 	case OMAP_L3_IA_IVA_SS_1: | 
 | 	case OMAP_L3_IA_IVA_SS_2: | 
 | 	case OMAP_L3_IA_IVA_SS_3: | 
 | 		return "IVA_SS"; | 
 | 	case OMAP_L3_IA_IVA_SS_DMA_1: | 
 | 	case OMAP_L3_IA_IVA_SS_DMA_2: | 
 | 	case OMAP_L3_IA_IVA_SS_DMA_3: | 
 | 	case OMAP_L3_IA_IVA_SS_DMA_4: | 
 | 	case OMAP_L3_IA_IVA_SS_DMA_5: | 
 | 	case OMAP_L3_IA_IVA_SS_DMA_6: | 
 | 		return "IVA_SS_DMA"; | 
 | 	case OMAP_L3_IA_SGX: | 
 | 		return "SGX"; | 
 | 	case OMAP_L3_IA_CAM_1: | 
 | 	case OMAP_L3_IA_CAM_2: | 
 | 	case OMAP_L3_IA_CAM_3: | 
 | 		return "CAM"; | 
 | 	case OMAP_L3_IA_DAP: | 
 | 		return "DAP"; | 
 | 	case OMAP_L3_SDMA_WR_1: | 
 | 	case OMAP_L3_SDMA_WR_2: | 
 | 		return "SDMA_WR"; | 
 | 	case OMAP_L3_SDMA_RD_1: | 
 | 	case OMAP_L3_SDMA_RD_2: | 
 | 	case OMAP_L3_SDMA_RD_3: | 
 | 	case OMAP_L3_SDMA_RD_4: | 
 | 		return "SDMA_RD"; | 
 | 	case OMAP_L3_USBOTG: | 
 | 		return "USB_OTG"; | 
 | 	case OMAP_L3_USBHOST: | 
 | 		return "USB_HOST"; | 
 | 	default: | 
 | 		return "UNKNOWN Initiator"; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * omap3_l3_block_irq - handles a register block's irq | 
 |  * @l3: struct omap3_l3 * | 
 |  * @base: register block base address | 
 |  * @error: L3_ERROR_LOG register of our block | 
 |  * | 
 |  * Called in hard-irq context. Caller should take care of locking | 
 |  * | 
 |  * OMAP36xx TRM gives, on page 2001, Figure 9-10, the Typical Error | 
 |  * Analysis Sequence, we are following that sequence here, please | 
 |  * refer to that Figure for more information on the subject. | 
 |  */ | 
 | static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, | 
 | 					u64 error, int error_addr) | 
 | { | 
 | 	u8 code = omap3_l3_decode_error_code(error); | 
 | 	u8 initid = omap3_l3_decode_initid(error); | 
 | 	u8 multi = error & L3_ERROR_LOG_MULTI; | 
 | 	u32 address = omap3_l3_decode_addr(error_addr); | 
 |  | 
 | 	pr_err("%s seen by %s %s at address %x\n", | 
 | 			omap3_l3_code_string(code), | 
 | 			omap3_l3_initiator_string(initid), | 
 | 			multi ? "Multiple Errors" : "", address); | 
 | 	WARN_ON(1); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) | 
 | { | 
 | 	struct omap3_l3 *l3 = _l3; | 
 | 	u64 status, clear; | 
 | 	u64 error; | 
 | 	u64 error_addr; | 
 | 	u64 err_source = 0; | 
 | 	void __iomem *base; | 
 | 	int int_type; | 
 | 	irqreturn_t ret = IRQ_NONE; | 
 |  | 
 | 	int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; | 
 | 	if (!int_type) { | 
 | 		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0); | 
 | 		/* | 
 | 		 * if we have a timeout error, there's nothing we can | 
 | 		 * do besides rebooting the board. So let's BUG on any | 
 | 		 * of such errors and handle the others. timeout error | 
 | 		 * is severe and not expected to occur. | 
 | 		 */ | 
 | 		BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK); | 
 | 	} else { | 
 | 		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1); | 
 | 		/* No timeout error for debug sources */ | 
 | 	} | 
 |  | 
 | 	/* identify the error source */ | 
 | 	err_source = __ffs(status); | 
 |  | 
 | 	base = l3->rt + omap3_l3_bases[int_type][err_source]; | 
 | 	error = omap3_l3_readll(base, L3_ERROR_LOG); | 
 | 	if (error) { | 
 | 		error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); | 
 | 		ret |= omap3_l3_block_irq(l3, error, error_addr); | 
 | 	} | 
 |  | 
 | 	/* Clear the status register */ | 
 | 	clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) | | 
 | 		L3_AGENT_STATUS_CLEAR_TA; | 
 | 	omap3_l3_writell(base, L3_AGENT_STATUS, clear); | 
 |  | 
 | 	/* clear the error log register */ | 
 | 	omap3_l3_writell(base, L3_ERROR_LOG, error); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | #if IS_BUILTIN(CONFIG_OF) | 
 | static const struct of_device_id omap3_l3_match[] = { | 
 | 	{ | 
 | 		.compatible = "ti,omap3-l3-smx", | 
 | 	}, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, omap3_l3_match); | 
 | #endif | 
 |  | 
 | static int omap3_l3_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct omap3_l3 *l3; | 
 | 	struct resource *res; | 
 | 	int ret; | 
 |  | 
 | 	l3 = kzalloc(sizeof(*l3), GFP_KERNEL); | 
 | 	if (!l3) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	platform_set_drvdata(pdev, l3); | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	if (!res) { | 
 | 		dev_err(&pdev->dev, "couldn't find resource\n"); | 
 | 		ret = -ENODEV; | 
 | 		goto err0; | 
 | 	} | 
 | 	l3->rt = ioremap(res->start, resource_size(res)); | 
 | 	if (!l3->rt) { | 
 | 		dev_err(&pdev->dev, "ioremap failed\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err0; | 
 | 	} | 
 |  | 
 | 	l3->debug_irq = platform_get_irq(pdev, 0); | 
 | 	ret = request_irq(l3->debug_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING, | 
 | 			  "l3-debug-irq", l3); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "couldn't request debug irq\n"); | 
 | 		goto err1; | 
 | 	} | 
 |  | 
 | 	l3->app_irq = platform_get_irq(pdev, 1); | 
 | 	ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_TRIGGER_RISING, | 
 | 			  "l3-app-irq", l3); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "couldn't request app irq\n"); | 
 | 		goto err2; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err2: | 
 | 	free_irq(l3->debug_irq, l3); | 
 | err1: | 
 | 	iounmap(l3->rt); | 
 | err0: | 
 | 	kfree(l3); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int omap3_l3_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct omap3_l3         *l3 = platform_get_drvdata(pdev); | 
 |  | 
 | 	free_irq(l3->app_irq, l3); | 
 | 	free_irq(l3->debug_irq, l3); | 
 | 	iounmap(l3->rt); | 
 | 	kfree(l3); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver omap3_l3_driver = { | 
 | 	.probe		= omap3_l3_probe, | 
 | 	.remove         = omap3_l3_remove, | 
 | 	.driver         = { | 
 | 		.name   = "omap_l3_smx", | 
 | 		.of_match_table = of_match_ptr(omap3_l3_match), | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init omap3_l3_init(void) | 
 | { | 
 | 	return platform_driver_register(&omap3_l3_driver); | 
 | } | 
 | postcore_initcall_sync(omap3_l3_init); | 
 |  | 
 | static void __exit omap3_l3_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&omap3_l3_driver); | 
 | } | 
 | module_exit(omap3_l3_exit); | 
 |  | 
 | MODULE_AUTHOR("Felipe Balbi"); | 
 | MODULE_AUTHOR("Santosh Shilimkar"); | 
 | MODULE_AUTHOR("Sricharan R"); | 
 | MODULE_DESCRIPTION("OMAP3XXX L3 Interconnect Driver"); | 
 | MODULE_LICENSE("GPL"); |