|  | /* | 
|  | * net/tipc/msg.c: TIPC message header routines | 
|  | * | 
|  | * Copyright (c) 2000-2006, 2014-2015, Ericsson AB | 
|  | * Copyright (c) 2005, 2010-2011, Wind River Systems | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions are met: | 
|  | * | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * 3. Neither the names of the copyright holders nor the names of its | 
|  | *    contributors may be used to endorse or promote products derived from | 
|  | *    this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | 
|  | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
|  | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
|  | * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE | 
|  | * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | 
|  | * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | 
|  | * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | 
|  | * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | 
|  | * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | 
|  | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | #include <net/sock.h> | 
|  | #include "core.h" | 
|  | #include "msg.h" | 
|  | #include "addr.h" | 
|  | #include "name_table.h" | 
|  | #include "crypto.h" | 
|  |  | 
|  | #define BUF_ALIGN(x) ALIGN(x, 4) | 
|  | #define MAX_FORWARD_SIZE 1024 | 
|  | #ifdef CONFIG_TIPC_CRYPTO | 
|  | #define BUF_HEADROOM ALIGN(((LL_MAX_HEADER + 48) + EHDR_MAX_SIZE), 16) | 
|  | #define BUF_OVERHEAD (BUF_HEADROOM + TIPC_AES_GCM_TAG_SIZE) | 
|  | #else | 
|  | #define BUF_HEADROOM (LL_MAX_HEADER + 48) | 
|  | #define BUF_OVERHEAD BUF_HEADROOM | 
|  | #endif | 
|  |  | 
|  | const int one_page_mtu = PAGE_SIZE - SKB_DATA_ALIGN(BUF_OVERHEAD) - | 
|  | SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); | 
|  |  | 
|  | /** | 
|  | * tipc_buf_acquire - creates a TIPC message buffer | 
|  | * @size: message size (including TIPC header) | 
|  | * @gfp: memory allocation flags | 
|  | * | 
|  | * Return: a new buffer with data pointers set to the specified size. | 
|  | * | 
|  | * NOTE: | 
|  | * Headroom is reserved to allow prepending of a data link header. | 
|  | * There may also be unrequested tailroom present at the buffer's end. | 
|  | */ | 
|  | struct sk_buff *tipc_buf_acquire(u32 size, gfp_t gfp) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = alloc_skb_fclone(BUF_OVERHEAD + size, gfp); | 
|  | if (skb) { | 
|  | skb_reserve(skb, BUF_HEADROOM); | 
|  | skb_put(skb, size); | 
|  | skb->next = NULL; | 
|  | } | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | void tipc_msg_init(u32 own_node, struct tipc_msg *m, u32 user, u32 type, | 
|  | u32 hsize, u32 dnode) | 
|  | { | 
|  | memset(m, 0, hsize); | 
|  | msg_set_version(m); | 
|  | msg_set_user(m, user); | 
|  | msg_set_hdr_sz(m, hsize); | 
|  | msg_set_size(m, hsize); | 
|  | msg_set_prevnode(m, own_node); | 
|  | msg_set_type(m, type); | 
|  | if (hsize > SHORT_H_SIZE) { | 
|  | msg_set_orignode(m, own_node); | 
|  | msg_set_destnode(m, dnode); | 
|  | } | 
|  | } | 
|  |  | 
|  | struct sk_buff *tipc_msg_create(uint user, uint type, | 
|  | uint hdr_sz, uint data_sz, u32 dnode, | 
|  | u32 onode, u32 dport, u32 oport, int errcode) | 
|  | { | 
|  | struct tipc_msg *msg; | 
|  | struct sk_buff *buf; | 
|  |  | 
|  | buf = tipc_buf_acquire(hdr_sz + data_sz, GFP_ATOMIC); | 
|  | if (unlikely(!buf)) | 
|  | return NULL; | 
|  |  | 
|  | msg = buf_msg(buf); | 
|  | tipc_msg_init(onode, msg, user, type, hdr_sz, dnode); | 
|  | msg_set_size(msg, hdr_sz + data_sz); | 
|  | msg_set_origport(msg, oport); | 
|  | msg_set_destport(msg, dport); | 
|  | msg_set_errcode(msg, errcode); | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | /* tipc_buf_append(): Append a buffer to the fragment list of another buffer | 
|  | * @*headbuf: in:  NULL for first frag, otherwise value returned from prev call | 
|  | *            out: set when successful non-complete reassembly, otherwise NULL | 
|  | * @*buf:     in:  the buffer to append. Always defined | 
|  | *            out: head buf after successful complete reassembly, otherwise NULL | 
|  | * Returns 1 when reassembly complete, otherwise 0 | 
|  | */ | 
|  | int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf) | 
|  | { | 
|  | struct sk_buff *head = *headbuf; | 
|  | struct sk_buff *frag = *buf; | 
|  | struct sk_buff *tail = NULL; | 
|  | struct tipc_msg *msg; | 
|  | u32 fragid; | 
|  | int delta; | 
|  | bool headstolen; | 
|  |  | 
|  | if (!frag) | 
|  | goto err; | 
|  |  | 
|  | msg = buf_msg(frag); | 
|  | fragid = msg_type(msg); | 
|  | frag->next = NULL; | 
|  | skb_pull(frag, msg_hdr_sz(msg)); | 
|  |  | 
|  | if (fragid == FIRST_FRAGMENT) { | 
|  | if (unlikely(head)) | 
|  | goto err; | 
|  | *buf = NULL; | 
|  | if (skb_has_frag_list(frag) && __skb_linearize(frag)) | 
|  | goto err; | 
|  | frag = skb_unshare(frag, GFP_ATOMIC); | 
|  | if (unlikely(!frag)) | 
|  | goto err; | 
|  | head = *headbuf = frag; | 
|  | TIPC_SKB_CB(head)->tail = NULL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!head) | 
|  | goto err; | 
|  |  | 
|  | if (skb_try_coalesce(head, frag, &headstolen, &delta)) { | 
|  | kfree_skb_partial(frag, headstolen); | 
|  | } else { | 
|  | tail = TIPC_SKB_CB(head)->tail; | 
|  | if (!skb_has_frag_list(head)) | 
|  | skb_shinfo(head)->frag_list = frag; | 
|  | else | 
|  | tail->next = frag; | 
|  | head->truesize += frag->truesize; | 
|  | head->data_len += frag->len; | 
|  | head->len += frag->len; | 
|  | TIPC_SKB_CB(head)->tail = frag; | 
|  | } | 
|  |  | 
|  | if (fragid == LAST_FRAGMENT) { | 
|  | TIPC_SKB_CB(head)->validated = 0; | 
|  | if (unlikely(!tipc_msg_validate(&head))) | 
|  | goto err; | 
|  | *buf = head; | 
|  | TIPC_SKB_CB(head)->tail = NULL; | 
|  | *headbuf = NULL; | 
|  | return 1; | 
|  | } | 
|  | *buf = NULL; | 
|  | return 0; | 
|  | err: | 
|  | kfree_skb(*buf); | 
|  | kfree_skb(*headbuf); | 
|  | *buf = *headbuf = NULL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tipc_msg_append(): Append data to tail of an existing buffer queue | 
|  | * @_hdr: header to be used | 
|  | * @m: the data to be appended | 
|  | * @mss: max allowable size of buffer | 
|  | * @dlen: size of data to be appended | 
|  | * @txq: queue to append to | 
|  | * | 
|  | * Return: the number of 1k blocks appended or errno value | 
|  | */ | 
|  | int tipc_msg_append(struct tipc_msg *_hdr, struct msghdr *m, int dlen, | 
|  | int mss, struct sk_buff_head *txq) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | int accounted, total, curr; | 
|  | int mlen, cpy, rem = dlen; | 
|  | struct tipc_msg *hdr; | 
|  |  | 
|  | skb = skb_peek_tail(txq); | 
|  | accounted = skb ? msg_blocks(buf_msg(skb)) : 0; | 
|  | total = accounted; | 
|  |  | 
|  | do { | 
|  | if (!skb || skb->len >= mss) { | 
|  | skb = tipc_buf_acquire(mss, GFP_KERNEL); | 
|  | if (unlikely(!skb)) | 
|  | return -ENOMEM; | 
|  | skb_orphan(skb); | 
|  | skb_trim(skb, MIN_H_SIZE); | 
|  | hdr = buf_msg(skb); | 
|  | skb_copy_to_linear_data(skb, _hdr, MIN_H_SIZE); | 
|  | msg_set_hdr_sz(hdr, MIN_H_SIZE); | 
|  | msg_set_size(hdr, MIN_H_SIZE); | 
|  | __skb_queue_tail(txq, skb); | 
|  | total += 1; | 
|  | } | 
|  | hdr = buf_msg(skb); | 
|  | curr = msg_blocks(hdr); | 
|  | mlen = msg_size(hdr); | 
|  | cpy = min_t(size_t, rem, mss - mlen); | 
|  | if (cpy != copy_from_iter(skb->data + mlen, cpy, &m->msg_iter)) | 
|  | return -EFAULT; | 
|  | msg_set_size(hdr, mlen + cpy); | 
|  | skb_put(skb, cpy); | 
|  | rem -= cpy; | 
|  | total += msg_blocks(hdr) - curr; | 
|  | } while (rem > 0); | 
|  | return total - accounted; | 
|  | } | 
|  |  | 
|  | /* tipc_msg_validate - validate basic format of received message | 
|  | * | 
|  | * This routine ensures a TIPC message has an acceptable header, and at least | 
|  | * as much data as the header indicates it should.  The routine also ensures | 
|  | * that the entire message header is stored in the main fragment of the message | 
|  | * buffer, to simplify future access to message header fields. | 
|  | * | 
|  | * Note: Having extra info present in the message header or data areas is OK. | 
|  | * TIPC will ignore the excess, under the assumption that it is optional info | 
|  | * introduced by a later release of the protocol. | 
|  | */ | 
|  | bool tipc_msg_validate(struct sk_buff **_skb) | 
|  | { | 
|  | struct sk_buff *skb = *_skb; | 
|  | struct tipc_msg *hdr; | 
|  | int msz, hsz; | 
|  |  | 
|  | /* Ensure that flow control ratio condition is satisfied */ | 
|  | if (unlikely(skb->truesize / buf_roundup_len(skb) >= 4)) { | 
|  | skb = skb_copy_expand(skb, BUF_HEADROOM, 0, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return false; | 
|  | kfree_skb(*_skb); | 
|  | *_skb = skb; | 
|  | } | 
|  |  | 
|  | if (unlikely(TIPC_SKB_CB(skb)->validated)) | 
|  | return true; | 
|  |  | 
|  | if (unlikely(!pskb_may_pull(skb, MIN_H_SIZE))) | 
|  | return false; | 
|  |  | 
|  | hsz = msg_hdr_sz(buf_msg(skb)); | 
|  | if (unlikely(hsz < MIN_H_SIZE) || (hsz > MAX_H_SIZE)) | 
|  | return false; | 
|  | if (unlikely(!pskb_may_pull(skb, hsz))) | 
|  | return false; | 
|  |  | 
|  | hdr = buf_msg(skb); | 
|  | if (unlikely(msg_version(hdr) != TIPC_VERSION)) | 
|  | return false; | 
|  |  | 
|  | msz = msg_size(hdr); | 
|  | if (unlikely(msz < hsz)) | 
|  | return false; | 
|  | if (unlikely((msz - hsz) > TIPC_MAX_USER_MSG_SIZE)) | 
|  | return false; | 
|  | if (unlikely(skb->len < msz)) | 
|  | return false; | 
|  |  | 
|  | TIPC_SKB_CB(skb)->validated = 1; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tipc_msg_fragment - build a fragment skb list for TIPC message | 
|  | * | 
|  | * @skb: TIPC message skb | 
|  | * @hdr: internal msg header to be put on the top of the fragments | 
|  | * @pktmax: max size of a fragment incl. the header | 
|  | * @frags: returned fragment skb list | 
|  | * | 
|  | * Return: 0 if the fragmentation is successful, otherwise: -EINVAL | 
|  | * or -ENOMEM | 
|  | */ | 
|  | int tipc_msg_fragment(struct sk_buff *skb, const struct tipc_msg *hdr, | 
|  | int pktmax, struct sk_buff_head *frags) | 
|  | { | 
|  | int pktno, nof_fragms, dsz, dmax, eat; | 
|  | struct tipc_msg *_hdr; | 
|  | struct sk_buff *_skb; | 
|  | u8 *data; | 
|  |  | 
|  | /* Non-linear buffer? */ | 
|  | if (skb_linearize(skb)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data = (u8 *)skb->data; | 
|  | dsz = msg_size(buf_msg(skb)); | 
|  | dmax = pktmax - INT_H_SIZE; | 
|  | if (dsz <= dmax || !dmax) | 
|  | return -EINVAL; | 
|  |  | 
|  | nof_fragms = dsz / dmax + 1; | 
|  | for (pktno = 1; pktno <= nof_fragms; pktno++) { | 
|  | if (pktno < nof_fragms) | 
|  | eat = dmax; | 
|  | else | 
|  | eat = dsz % dmax; | 
|  | /* Allocate a new fragment */ | 
|  | _skb = tipc_buf_acquire(INT_H_SIZE + eat, GFP_ATOMIC); | 
|  | if (!_skb) | 
|  | goto error; | 
|  | skb_orphan(_skb); | 
|  | __skb_queue_tail(frags, _skb); | 
|  | /* Copy header & data to the fragment */ | 
|  | skb_copy_to_linear_data(_skb, hdr, INT_H_SIZE); | 
|  | skb_copy_to_linear_data_offset(_skb, INT_H_SIZE, data, eat); | 
|  | data += eat; | 
|  | /* Update the fragment's header */ | 
|  | _hdr = buf_msg(_skb); | 
|  | msg_set_fragm_no(_hdr, pktno); | 
|  | msg_set_nof_fragms(_hdr, nof_fragms); | 
|  | msg_set_size(_hdr, INT_H_SIZE + eat); | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | __skb_queue_purge(frags); | 
|  | __skb_queue_head_init(frags); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tipc_msg_build - create buffer chain containing specified header and data | 
|  | * @mhdr: Message header, to be prepended to data | 
|  | * @m: User message | 
|  | * @offset: buffer offset for fragmented messages (FIXME) | 
|  | * @dsz: Total length of user data | 
|  | * @pktmax: Max packet size that can be used | 
|  | * @list: Buffer or chain of buffers to be returned to caller | 
|  | * | 
|  | * Note that the recursive call we are making here is safe, since it can | 
|  | * logically go only one further level down. | 
|  | * | 
|  | * Return: message data size or errno: -ENOMEM, -EFAULT | 
|  | */ | 
|  | int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, int offset, | 
|  | int dsz, int pktmax, struct sk_buff_head *list) | 
|  | { | 
|  | int mhsz = msg_hdr_sz(mhdr); | 
|  | struct tipc_msg pkthdr; | 
|  | int msz = mhsz + dsz; | 
|  | int pktrem = pktmax; | 
|  | struct sk_buff *skb; | 
|  | int drem = dsz; | 
|  | int pktno = 1; | 
|  | char *pktpos; | 
|  | int pktsz; | 
|  | int rc; | 
|  |  | 
|  | msg_set_size(mhdr, msz); | 
|  |  | 
|  | /* No fragmentation needed? */ | 
|  | if (likely(msz <= pktmax)) { | 
|  | skb = tipc_buf_acquire(msz, GFP_KERNEL); | 
|  |  | 
|  | /* Fall back to smaller MTU if node local message */ | 
|  | if (unlikely(!skb)) { | 
|  | if (pktmax != MAX_MSG_SIZE) | 
|  | return -ENOMEM; | 
|  | rc = tipc_msg_build(mhdr, m, offset, dsz, | 
|  | one_page_mtu, list); | 
|  | if (rc != dsz) | 
|  | return rc; | 
|  | if (tipc_msg_assemble(list)) | 
|  | return dsz; | 
|  | return -ENOMEM; | 
|  | } | 
|  | skb_orphan(skb); | 
|  | __skb_queue_tail(list, skb); | 
|  | skb_copy_to_linear_data(skb, mhdr, mhsz); | 
|  | pktpos = skb->data + mhsz; | 
|  | if (copy_from_iter_full(pktpos, dsz, &m->msg_iter)) | 
|  | return dsz; | 
|  | rc = -EFAULT; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* Prepare reusable fragment header */ | 
|  | tipc_msg_init(msg_prevnode(mhdr), &pkthdr, MSG_FRAGMENTER, | 
|  | FIRST_FRAGMENT, INT_H_SIZE, msg_destnode(mhdr)); | 
|  | msg_set_size(&pkthdr, pktmax); | 
|  | msg_set_fragm_no(&pkthdr, pktno); | 
|  | msg_set_importance(&pkthdr, msg_importance(mhdr)); | 
|  |  | 
|  | /* Prepare first fragment */ | 
|  | skb = tipc_buf_acquire(pktmax, GFP_KERNEL); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  | skb_orphan(skb); | 
|  | __skb_queue_tail(list, skb); | 
|  | pktpos = skb->data; | 
|  | skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE); | 
|  | pktpos += INT_H_SIZE; | 
|  | pktrem -= INT_H_SIZE; | 
|  | skb_copy_to_linear_data_offset(skb, INT_H_SIZE, mhdr, mhsz); | 
|  | pktpos += mhsz; | 
|  | pktrem -= mhsz; | 
|  |  | 
|  | do { | 
|  | if (drem < pktrem) | 
|  | pktrem = drem; | 
|  |  | 
|  | if (!copy_from_iter_full(pktpos, pktrem, &m->msg_iter)) { | 
|  | rc = -EFAULT; | 
|  | goto error; | 
|  | } | 
|  | drem -= pktrem; | 
|  |  | 
|  | if (!drem) | 
|  | break; | 
|  |  | 
|  | /* Prepare new fragment: */ | 
|  | if (drem < (pktmax - INT_H_SIZE)) | 
|  | pktsz = drem + INT_H_SIZE; | 
|  | else | 
|  | pktsz = pktmax; | 
|  | skb = tipc_buf_acquire(pktsz, GFP_KERNEL); | 
|  | if (!skb) { | 
|  | rc = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  | skb_orphan(skb); | 
|  | __skb_queue_tail(list, skb); | 
|  | msg_set_type(&pkthdr, FRAGMENT); | 
|  | msg_set_size(&pkthdr, pktsz); | 
|  | msg_set_fragm_no(&pkthdr, ++pktno); | 
|  | skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE); | 
|  | pktpos = skb->data + INT_H_SIZE; | 
|  | pktrem = pktsz - INT_H_SIZE; | 
|  |  | 
|  | } while (1); | 
|  | msg_set_type(buf_msg(skb), LAST_FRAGMENT); | 
|  | return dsz; | 
|  | error: | 
|  | __skb_queue_purge(list); | 
|  | __skb_queue_head_init(list); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tipc_msg_bundle - Append contents of a buffer to tail of an existing one | 
|  | * @bskb: the bundle buffer to append to | 
|  | * @msg: message to be appended | 
|  | * @max: max allowable size for the bundle buffer | 
|  | * | 
|  | * Return: "true" if bundling has been performed, otherwise "false" | 
|  | */ | 
|  | static bool tipc_msg_bundle(struct sk_buff *bskb, struct tipc_msg *msg, | 
|  | u32 max) | 
|  | { | 
|  | struct tipc_msg *bmsg = buf_msg(bskb); | 
|  | u32 msz, bsz, offset, pad; | 
|  |  | 
|  | msz = msg_size(msg); | 
|  | bsz = msg_size(bmsg); | 
|  | offset = BUF_ALIGN(bsz); | 
|  | pad = offset - bsz; | 
|  |  | 
|  | if (unlikely(skb_tailroom(bskb) < (pad + msz))) | 
|  | return false; | 
|  | if (unlikely(max < (offset + msz))) | 
|  | return false; | 
|  |  | 
|  | skb_put(bskb, pad + msz); | 
|  | skb_copy_to_linear_data_offset(bskb, offset, msg, msz); | 
|  | msg_set_size(bmsg, offset + msz); | 
|  | msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tipc_msg_try_bundle - Try to bundle a new message to the last one | 
|  | * @tskb: the last/target message to which the new one will be appended | 
|  | * @skb: the new message skb pointer | 
|  | * @mss: max message size (header inclusive) | 
|  | * @dnode: destination node for the message | 
|  | * @new_bundle: if this call made a new bundle or not | 
|  | * | 
|  | * Return: "true" if the new message skb is potential for bundling this time or | 
|  | * later, in the case a bundling has been done this time, the skb is consumed | 
|  | * (the skb pointer = NULL). | 
|  | * Otherwise, "false" if the skb cannot be bundled at all. | 
|  | */ | 
|  | bool tipc_msg_try_bundle(struct sk_buff *tskb, struct sk_buff **skb, u32 mss, | 
|  | u32 dnode, bool *new_bundle) | 
|  | { | 
|  | struct tipc_msg *msg, *inner, *outer; | 
|  | u32 tsz; | 
|  |  | 
|  | /* First, check if the new buffer is suitable for bundling */ | 
|  | msg = buf_msg(*skb); | 
|  | if (msg_user(msg) == MSG_FRAGMENTER) | 
|  | return false; | 
|  | if (msg_user(msg) == TUNNEL_PROTOCOL) | 
|  | return false; | 
|  | if (msg_user(msg) == BCAST_PROTOCOL) | 
|  | return false; | 
|  | if (mss <= INT_H_SIZE + msg_size(msg)) | 
|  | return false; | 
|  |  | 
|  | /* Ok, but the last/target buffer can be empty? */ | 
|  | if (unlikely(!tskb)) | 
|  | return true; | 
|  |  | 
|  | /* Is it a bundle already? Try to bundle the new message to it */ | 
|  | if (msg_user(buf_msg(tskb)) == MSG_BUNDLER) { | 
|  | *new_bundle = false; | 
|  | goto bundle; | 
|  | } | 
|  |  | 
|  | /* Make a new bundle of the two messages if possible */ | 
|  | tsz = msg_size(buf_msg(tskb)); | 
|  | if (unlikely(mss < BUF_ALIGN(INT_H_SIZE + tsz) + msg_size(msg))) | 
|  | return true; | 
|  | if (unlikely(pskb_expand_head(tskb, INT_H_SIZE, mss - tsz - INT_H_SIZE, | 
|  | GFP_ATOMIC))) | 
|  | return true; | 
|  | inner = buf_msg(tskb); | 
|  | skb_push(tskb, INT_H_SIZE); | 
|  | outer = buf_msg(tskb); | 
|  | tipc_msg_init(msg_prevnode(inner), outer, MSG_BUNDLER, 0, INT_H_SIZE, | 
|  | dnode); | 
|  | msg_set_importance(outer, msg_importance(inner)); | 
|  | msg_set_size(outer, INT_H_SIZE + tsz); | 
|  | msg_set_msgcnt(outer, 1); | 
|  | *new_bundle = true; | 
|  |  | 
|  | bundle: | 
|  | if (likely(tipc_msg_bundle(tskb, msg, mss))) { | 
|  | consume_skb(*skb); | 
|  | *skb = NULL; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  tipc_msg_extract(): extract bundled inner packet from buffer | 
|  | *  @skb: buffer to be extracted from. | 
|  | *  @iskb: extracted inner buffer, to be returned | 
|  | *  @pos: position in outer message of msg to be extracted. | 
|  | *  Returns position of next msg. | 
|  | *  Consumes outer buffer when last packet extracted | 
|  | *  Return: true when there is an extracted buffer, otherwise false | 
|  | */ | 
|  | bool tipc_msg_extract(struct sk_buff *skb, struct sk_buff **iskb, int *pos) | 
|  | { | 
|  | struct tipc_msg *hdr, *ihdr; | 
|  | int imsz; | 
|  |  | 
|  | *iskb = NULL; | 
|  | if (unlikely(skb_linearize(skb))) | 
|  | goto none; | 
|  |  | 
|  | hdr = buf_msg(skb); | 
|  | if (unlikely(*pos > (msg_data_sz(hdr) - MIN_H_SIZE))) | 
|  | goto none; | 
|  |  | 
|  | ihdr = (struct tipc_msg *)(msg_data(hdr) + *pos); | 
|  | imsz = msg_size(ihdr); | 
|  |  | 
|  | if ((*pos + imsz) > msg_data_sz(hdr)) | 
|  | goto none; | 
|  |  | 
|  | *iskb = tipc_buf_acquire(imsz, GFP_ATOMIC); | 
|  | if (!*iskb) | 
|  | goto none; | 
|  |  | 
|  | skb_copy_to_linear_data(*iskb, ihdr, imsz); | 
|  | if (unlikely(!tipc_msg_validate(iskb))) | 
|  | goto none; | 
|  |  | 
|  | *pos += BUF_ALIGN(imsz); | 
|  | return true; | 
|  | none: | 
|  | kfree_skb(skb); | 
|  | kfree_skb(*iskb); | 
|  | *iskb = NULL; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tipc_msg_reverse(): swap source and destination addresses and add error code | 
|  | * @own_node: originating node id for reversed message | 
|  | * @skb:  buffer containing message to be reversed; will be consumed | 
|  | * @err:  error code to be set in message, if any | 
|  | * Replaces consumed buffer with new one when successful | 
|  | * Return: true if success, otherwise false | 
|  | */ | 
|  | bool tipc_msg_reverse(u32 own_node,  struct sk_buff **skb, int err) | 
|  | { | 
|  | struct sk_buff *_skb = *skb; | 
|  | struct tipc_msg *_hdr, *hdr; | 
|  | int hlen, dlen; | 
|  |  | 
|  | if (skb_linearize(_skb)) | 
|  | goto exit; | 
|  | _hdr = buf_msg(_skb); | 
|  | dlen = min_t(uint, msg_data_sz(_hdr), MAX_FORWARD_SIZE); | 
|  | hlen = msg_hdr_sz(_hdr); | 
|  |  | 
|  | if (msg_dest_droppable(_hdr)) | 
|  | goto exit; | 
|  | if (msg_errcode(_hdr)) | 
|  | goto exit; | 
|  |  | 
|  | /* Never return SHORT header */ | 
|  | if (hlen == SHORT_H_SIZE) | 
|  | hlen = BASIC_H_SIZE; | 
|  |  | 
|  | /* Don't return data along with SYN+, - sender has a clone */ | 
|  | if (msg_is_syn(_hdr) && err == TIPC_ERR_OVERLOAD) | 
|  | dlen = 0; | 
|  |  | 
|  | /* Allocate new buffer to return */ | 
|  | *skb = tipc_buf_acquire(hlen + dlen, GFP_ATOMIC); | 
|  | if (!*skb) | 
|  | goto exit; | 
|  | memcpy((*skb)->data, _skb->data, msg_hdr_sz(_hdr)); | 
|  | memcpy((*skb)->data + hlen, msg_data(_hdr), dlen); | 
|  |  | 
|  | /* Build reverse header in new buffer */ | 
|  | hdr = buf_msg(*skb); | 
|  | msg_set_hdr_sz(hdr, hlen); | 
|  | msg_set_errcode(hdr, err); | 
|  | msg_set_non_seq(hdr, 0); | 
|  | msg_set_origport(hdr, msg_destport(_hdr)); | 
|  | msg_set_destport(hdr, msg_origport(_hdr)); | 
|  | msg_set_destnode(hdr, msg_prevnode(_hdr)); | 
|  | msg_set_prevnode(hdr, own_node); | 
|  | msg_set_orignode(hdr, own_node); | 
|  | msg_set_size(hdr, hlen + dlen); | 
|  | skb_orphan(_skb); | 
|  | kfree_skb(_skb); | 
|  | return true; | 
|  | exit: | 
|  | kfree_skb(_skb); | 
|  | *skb = NULL; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool tipc_msg_skb_clone(struct sk_buff_head *msg, struct sk_buff_head *cpy) | 
|  | { | 
|  | struct sk_buff *skb, *_skb; | 
|  |  | 
|  | skb_queue_walk(msg, skb) { | 
|  | _skb = skb_clone(skb, GFP_ATOMIC); | 
|  | if (!_skb) { | 
|  | __skb_queue_purge(cpy); | 
|  | pr_err_ratelimited("Failed to clone buffer chain\n"); | 
|  | return false; | 
|  | } | 
|  | __skb_queue_tail(cpy, _skb); | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tipc_msg_lookup_dest(): try to find new destination for named message | 
|  | * @net: pointer to associated network namespace | 
|  | * @skb: the buffer containing the message. | 
|  | * @err: error code to be used by caller if lookup fails | 
|  | * Does not consume buffer | 
|  | * Return: true if a destination is found, false otherwise | 
|  | */ | 
|  | bool tipc_msg_lookup_dest(struct net *net, struct sk_buff *skb, int *err) | 
|  | { | 
|  | struct tipc_msg *msg = buf_msg(skb); | 
|  | u32 scope = msg_lookup_scope(msg); | 
|  | u32 self = tipc_own_addr(net); | 
|  | u32 inst = msg_nameinst(msg); | 
|  | struct tipc_socket_addr sk; | 
|  | struct tipc_uaddr ua; | 
|  |  | 
|  | if (!msg_isdata(msg)) | 
|  | return false; | 
|  | if (!msg_named(msg)) | 
|  | return false; | 
|  | if (msg_errcode(msg)) | 
|  | return false; | 
|  | *err = TIPC_ERR_NO_NAME; | 
|  | if (skb_linearize(skb)) | 
|  | return false; | 
|  | msg = buf_msg(skb); | 
|  | if (msg_reroute_cnt(msg)) | 
|  | return false; | 
|  | tipc_uaddr(&ua, TIPC_SERVICE_RANGE, scope, | 
|  | msg_nametype(msg), inst, inst); | 
|  | sk.node = tipc_scope2node(net, scope); | 
|  | if (!tipc_nametbl_lookup_anycast(net, &ua, &sk)) | 
|  | return false; | 
|  | msg_incr_reroute_cnt(msg); | 
|  | if (sk.node != self) | 
|  | msg_set_prevnode(msg, self); | 
|  | msg_set_destnode(msg, sk.node); | 
|  | msg_set_destport(msg, sk.ref); | 
|  | *err = TIPC_OK; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* tipc_msg_assemble() - assemble chain of fragments into one message | 
|  | */ | 
|  | bool tipc_msg_assemble(struct sk_buff_head *list) | 
|  | { | 
|  | struct sk_buff *skb, *tmp = NULL; | 
|  |  | 
|  | if (skb_queue_len(list) == 1) | 
|  | return true; | 
|  |  | 
|  | while ((skb = __skb_dequeue(list))) { | 
|  | skb->next = NULL; | 
|  | if (tipc_buf_append(&tmp, &skb)) { | 
|  | __skb_queue_tail(list, skb); | 
|  | return true; | 
|  | } | 
|  | if (!tmp) | 
|  | break; | 
|  | } | 
|  | __skb_queue_purge(list); | 
|  | __skb_queue_head_init(list); | 
|  | pr_warn("Failed do assemble buffer\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* tipc_msg_reassemble() - clone a buffer chain of fragments and | 
|  | *                         reassemble the clones into one message | 
|  | */ | 
|  | bool tipc_msg_reassemble(struct sk_buff_head *list, struct sk_buff_head *rcvq) | 
|  | { | 
|  | struct sk_buff *skb, *_skb; | 
|  | struct sk_buff *frag = NULL; | 
|  | struct sk_buff *head = NULL; | 
|  | int hdr_len; | 
|  |  | 
|  | /* Copy header if single buffer */ | 
|  | if (skb_queue_len(list) == 1) { | 
|  | skb = skb_peek(list); | 
|  | hdr_len = skb_headroom(skb) + msg_hdr_sz(buf_msg(skb)); | 
|  | _skb = __pskb_copy(skb, hdr_len, GFP_ATOMIC); | 
|  | if (!_skb) | 
|  | return false; | 
|  | __skb_queue_tail(rcvq, _skb); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* Clone all fragments and reassemble */ | 
|  | skb_queue_walk(list, skb) { | 
|  | frag = skb_clone(skb, GFP_ATOMIC); | 
|  | if (!frag) | 
|  | goto error; | 
|  | frag->next = NULL; | 
|  | if (tipc_buf_append(&head, &frag)) | 
|  | break; | 
|  | if (!head) | 
|  | goto error; | 
|  | } | 
|  | __skb_queue_tail(rcvq, frag); | 
|  | return true; | 
|  | error: | 
|  | pr_warn("Failed do clone local mcast rcv buffer\n"); | 
|  | kfree_skb(head); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool tipc_msg_pskb_copy(u32 dst, struct sk_buff_head *msg, | 
|  | struct sk_buff_head *cpy) | 
|  | { | 
|  | struct sk_buff *skb, *_skb; | 
|  |  | 
|  | skb_queue_walk(msg, skb) { | 
|  | _skb = pskb_copy(skb, GFP_ATOMIC); | 
|  | if (!_skb) { | 
|  | __skb_queue_purge(cpy); | 
|  | return false; | 
|  | } | 
|  | msg_set_destnode(buf_msg(_skb), dst); | 
|  | __skb_queue_tail(cpy, _skb); | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* tipc_skb_queue_sorted(); sort pkt into list according to sequence number | 
|  | * @list: list to be appended to | 
|  | * @seqno: sequence number of buffer to add | 
|  | * @skb: buffer to add | 
|  | */ | 
|  | bool __tipc_skb_queue_sorted(struct sk_buff_head *list, u16 seqno, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct sk_buff *_skb, *tmp; | 
|  |  | 
|  | if (skb_queue_empty(list) || less(seqno, buf_seqno(skb_peek(list)))) { | 
|  | __skb_queue_head(list, skb); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (more(seqno, buf_seqno(skb_peek_tail(list)))) { | 
|  | __skb_queue_tail(list, skb); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | skb_queue_walk_safe(list, _skb, tmp) { | 
|  | if (more(seqno, buf_seqno(_skb))) | 
|  | continue; | 
|  | if (seqno == buf_seqno(_skb)) | 
|  | break; | 
|  | __skb_queue_before(list, _skb, skb); | 
|  | return true; | 
|  | } | 
|  | kfree_skb(skb); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | void tipc_skb_reject(struct net *net, int err, struct sk_buff *skb, | 
|  | struct sk_buff_head *xmitq) | 
|  | { | 
|  | if (tipc_msg_reverse(tipc_own_addr(net), &skb, err)) | 
|  | __skb_queue_tail(xmitq, skb); | 
|  | } |