| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Copyright 2017-2022 Broadcom Inc. All rights reserved. |
| */ |
| #ifndef MPI30_CNFG_H |
| #define MPI30_CNFG_H 1 |
| #define MPI3_CONFIG_PAGETYPE_IO_UNIT (0x00) |
| #define MPI3_CONFIG_PAGETYPE_MANUFACTURING (0x01) |
| #define MPI3_CONFIG_PAGETYPE_IOC (0x02) |
| #define MPI3_CONFIG_PAGETYPE_DRIVER (0x03) |
| #define MPI3_CONFIG_PAGETYPE_SECURITY (0x04) |
| #define MPI3_CONFIG_PAGETYPE_ENCLOSURE (0x11) |
| #define MPI3_CONFIG_PAGETYPE_DEVICE (0x12) |
| #define MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT (0x20) |
| #define MPI3_CONFIG_PAGETYPE_SAS_EXPANDER (0x21) |
| #define MPI3_CONFIG_PAGETYPE_SAS_PHY (0x23) |
| #define MPI3_CONFIG_PAGETYPE_SAS_PORT (0x24) |
| #define MPI3_CONFIG_PAGETYPE_PCIE_IO_UNIT (0x30) |
| #define MPI3_CONFIG_PAGETYPE_PCIE_SWITCH (0x31) |
| #define MPI3_CONFIG_PAGETYPE_PCIE_LINK (0x33) |
| #define MPI3_CONFIG_PAGEATTR_MASK (0xf0) |
| #define MPI3_CONFIG_PAGEATTR_READ_ONLY (0x00) |
| #define MPI3_CONFIG_PAGEATTR_CHANGEABLE (0x10) |
| #define MPI3_CONFIG_PAGEATTR_PERSISTENT (0x20) |
| #define MPI3_CONFIG_ACTION_PAGE_HEADER (0x00) |
| #define MPI3_CONFIG_ACTION_READ_DEFAULT (0x01) |
| #define MPI3_CONFIG_ACTION_READ_CURRENT (0x02) |
| #define MPI3_CONFIG_ACTION_WRITE_CURRENT (0x03) |
| #define MPI3_CONFIG_ACTION_READ_PERSISTENT (0x04) |
| #define MPI3_CONFIG_ACTION_WRITE_PERSISTENT (0x05) |
| #define MPI3_DEVICE_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI3_DEVICE_PGAD_FORM_HANDLE (0x20000000) |
| #define MPI3_DEVICE_PGAD_HANDLE_MASK (0x0000ffff) |
| #define MPI3_SAS_EXPAND_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x10000000) |
| #define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE (0x20000000) |
| #define MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00ff0000) |
| #define MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) |
| #define MPI3_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000ffff) |
| #define MPI3_SAS_PHY_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) |
| #define MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000ff) |
| #define MPI3_SASPORT_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) |
| #define MPI3_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) |
| #define MPI3_SASPORT_PGAD_PORT_NUMBER_MASK (0x000000ff) |
| #define MPI3_ENCLOS_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI3_ENCLOS_PGAD_FORM_HANDLE (0x10000000) |
| #define MPI3_ENCLOS_PGAD_HANDLE_MASK (0x0000ffff) |
| #define MPI3_PCIE_SWITCH_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) |
| #define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE_PORT_NUM (0x10000000) |
| #define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE (0x20000000) |
| #define MPI3_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00ff0000) |
| #define MPI3_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16) |
| #define MPI3_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000ffff) |
| #define MPI3_PCIE_LINK_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000) |
| #define MPI3_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000) |
| #define MPI3_PCIE_LINK_PGAD_LINKNUM_MASK (0x000000ff) |
| #define MPI3_SECURITY_PGAD_FORM_MASK (0xf0000000) |
| #define MPI3_SECURITY_PGAD_FORM_GET_NEXT_SLOT (0x00000000) |
| #define MPI3_SECURITY_PGAD_FORM_SOT_NUM (0x10000000) |
| #define MPI3_SECURITY_PGAD_SLOT_GROUP_MASK (0x0000ff00) |
| #define MPI3_SECURITY_PGAD_SLOT_MASK (0x000000ff) |
| struct mpi3_config_request { |
| __le16 host_tag; |
| u8 ioc_use_only02; |
| u8 function; |
| __le16 ioc_use_only04; |
| u8 ioc_use_only06; |
| u8 msg_flags; |
| __le16 change_count; |
| __le16 reserved0a; |
| u8 page_version; |
| u8 page_number; |
| u8 page_type; |
| u8 action; |
| __le32 page_address; |
| __le16 page_length; |
| __le16 reserved16; |
| __le32 reserved18[2]; |
| union mpi3_sge_union sgl; |
| }; |
| |
| struct mpi3_config_page_header { |
| u8 page_version; |
| u8 reserved01; |
| u8 page_number; |
| u8 page_attribute; |
| __le16 page_length; |
| u8 page_type; |
| u8 reserved07; |
| }; |
| |
| #define MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK (0xf0) |
| #define MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT (4) |
| #define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_MASK (0x0f) |
| #define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_SHIFT (0) |
| #define MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) |
| #define MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) |
| #define MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) |
| #define MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) |
| #define MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) |
| #define MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) |
| #define MPI3_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) |
| #define MPI3_SAS_NEG_LINK_RATE_1_5 (0x08) |
| #define MPI3_SAS_NEG_LINK_RATE_3_0 (0x09) |
| #define MPI3_SAS_NEG_LINK_RATE_6_0 (0x0a) |
| #define MPI3_SAS_NEG_LINK_RATE_12_0 (0x0b) |
| #define MPI3_SAS_NEG_LINK_RATE_22_5 (0x0c) |
| #define MPI3_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) |
| #define MPI3_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) |
| #define MPI3_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) |
| #define MPI3_SAS_APHYINFO_REASON_MASK (0x0000000f) |
| #define MPI3_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) |
| #define MPI3_SAS_APHYINFO_REASON_POWER_ON (0x00000001) |
| #define MPI3_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) |
| #define MPI3_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) |
| #define MPI3_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) |
| #define MPI3_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) |
| #define MPI3_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) |
| #define MPI3_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) |
| #define MPI3_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) |
| #define MPI3_SAS_APHYINFO_REASON_EXP_REDUCED_FUNC (0x00000009) |
| #define MPI3_SAS_PHYINFO_STATUS_MASK (0xc0000000) |
| #define MPI3_SAS_PHYINFO_STATUS_SHIFT (30) |
| #define MPI3_SAS_PHYINFO_STATUS_ACCESSIBLE (0x00000000) |
| #define MPI3_SAS_PHYINFO_STATUS_NOT_EXIST (0x40000000) |
| #define MPI3_SAS_PHYINFO_STATUS_VACANT (0x80000000) |
| #define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) |
| #define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_ACTIVE (0x00000000) |
| #define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_PARTIAL (0x08000000) |
| #define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_SLUMBER (0x10000000) |
| #define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_SHIFT (0) |
| #define MPI3_SAS_PHYINFO_REQUESTED_INSIDE_ZPSDS_CHANGED_MASK (0x04000000) |
| #define MPI3_SAS_PHYINFO_REQUESTED_INSIDE_ZPSDS_CHANGED_SHIFT (26) |
| #define MPI3_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT_MASK (0x02000000) |
| #define MPI3_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT_SHIFT (25) |
| #define MPI3_SAS_PHYINFO_REQUESTED_INSIDE_ZPSDS_MASK (0x01000000) |
| #define MPI3_SAS_PHYINFO_REQUESTED_INSIDE_ZPSDS_SHIFT (24) |
| #define MPI3_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) |
| #define MPI3_SAS_PHYINFO_INSIDE_ZPSDS_WITHIN (0x00200000) |
| #define MPI3_SAS_PHYINFO_ZONING_ENABLED (0x00100000) |
| #define MPI3_SAS_PHYINFO_REASON_MASK (0x000f0000) |
| #define MPI3_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) |
| #define MPI3_SAS_PHYINFO_REASON_POWER_ON (0x00010000) |
| #define MPI3_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) |
| #define MPI3_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) |
| #define MPI3_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) |
| #define MPI3_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) |
| #define MPI3_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) |
| #define MPI3_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) |
| #define MPI3_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) |
| #define MPI3_SAS_PHYINFO_REASON_EXP_REDUCED_FUNC (0x00090000) |
| #define MPI3_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) |
| #define MPI3_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) |
| #define MPI3_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) |
| #define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_MASK (0x00000f00) |
| #define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_SHIFT (8) |
| #define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_MASK (0x000000f0) |
| #define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_DIRECT (0x00000000) |
| #define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_SUBTRACTIVE (0x00000010) |
| #define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_TABLE (0x00000020) |
| #define MPI3_SAS_PRATE_MAX_RATE_MASK (0xf0) |
| #define MPI3_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI3_SAS_PRATE_MAX_RATE_1_5 (0x80) |
| #define MPI3_SAS_PRATE_MAX_RATE_3_0 (0x90) |
| #define MPI3_SAS_PRATE_MAX_RATE_6_0 (0xa0) |
| #define MPI3_SAS_PRATE_MAX_RATE_12_0 (0xb0) |
| #define MPI3_SAS_PRATE_MAX_RATE_22_5 (0xc0) |
| #define MPI3_SAS_PRATE_MIN_RATE_MASK (0x0f) |
| #define MPI3_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) |
| #define MPI3_SAS_PRATE_MIN_RATE_1_5 (0x08) |
| #define MPI3_SAS_PRATE_MIN_RATE_3_0 (0x09) |
| #define MPI3_SAS_PRATE_MIN_RATE_6_0 (0x0a) |
| #define MPI3_SAS_PRATE_MIN_RATE_12_0 (0x0b) |
| #define MPI3_SAS_PRATE_MIN_RATE_22_5 (0x0c) |
| #define MPI3_SAS_HWRATE_MAX_RATE_MASK (0xf0) |
| #define MPI3_SAS_HWRATE_MAX_RATE_1_5 (0x80) |
| #define MPI3_SAS_HWRATE_MAX_RATE_3_0 (0x90) |
| #define MPI3_SAS_HWRATE_MAX_RATE_6_0 (0xa0) |
| #define MPI3_SAS_HWRATE_MAX_RATE_12_0 (0xb0) |
| #define MPI3_SAS_HWRATE_MAX_RATE_22_5 (0xc0) |
| #define MPI3_SAS_HWRATE_MIN_RATE_MASK (0x0f) |
| #define MPI3_SAS_HWRATE_MIN_RATE_1_5 (0x08) |
| #define MPI3_SAS_HWRATE_MIN_RATE_3_0 (0x09) |
| #define MPI3_SAS_HWRATE_MIN_RATE_6_0 (0x0a) |
| #define MPI3_SAS_HWRATE_MIN_RATE_12_0 (0x0b) |
| #define MPI3_SAS_HWRATE_MIN_RATE_22_5 (0x0c) |
| #define MPI3_SLOT_INVALID (0xffff) |
| #define MPI3_SLOT_INDEX_INVALID (0xffff) |
| #define MPI3_LINK_CHANGE_COUNT_INVALID (0xffff) |
| #define MPI3_RATE_CHANGE_COUNT_INVALID (0xffff) |
| #define MPI3_TEMP_SENSOR_LOCATION_INTERNAL (0x0) |
| #define MPI3_TEMP_SENSOR_LOCATION_INLET (0x1) |
| #define MPI3_TEMP_SENSOR_LOCATION_OUTLET (0x2) |
| #define MPI3_TEMP_SENSOR_LOCATION_DRAM (0x3) |
| #define MPI3_MFGPAGE_VENDORID_BROADCOM (0x1000) |
| #define MPI3_MFGPAGE_DEVID_SAS4116 (0x00a5) |
| struct mpi3_man_page0 { |
| struct mpi3_config_page_header header; |
| u8 chip_revision[8]; |
| u8 chip_name[32]; |
| u8 board_name[32]; |
| u8 board_assembly[32]; |
| u8 board_tracer_number[32]; |
| __le32 board_power; |
| __le32 reserved94; |
| __le32 reserved98; |
| u8 oem; |
| u8 profile_identifier; |
| __le16 flags; |
| u8 board_mfg_day; |
| u8 board_mfg_month; |
| __le16 board_mfg_year; |
| u8 board_rework_day; |
| u8 board_rework_month; |
| __le16 board_rework_year; |
| u8 board_revision[8]; |
| u8 e_pack_fru[16]; |
| u8 product_name[256]; |
| }; |
| |
| #define MPI3_MAN0_PAGEVERSION (0x00) |
| #define MPI3_MAN0_FLAGS_SWITCH_PRESENT (0x0002) |
| #define MPI3_MAN0_FLAGS_EXPANDER_PRESENT (0x0001) |
| #define MPI3_MAN1_VPD_SIZE (512) |
| struct mpi3_man_page1 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08[2]; |
| u8 vpd[MPI3_MAN1_VPD_SIZE]; |
| }; |
| |
| #define MPI3_MAN1_PAGEVERSION (0x00) |
| struct mpi3_man_page2 { |
| struct mpi3_config_page_header header; |
| u8 flags; |
| u8 reserved09[3]; |
| __le32 reserved0c[3]; |
| u8 oem_board_tracer_number[32]; |
| }; |
| #define MPI3_MAN2_PAGEVERSION (0x00) |
| #define MPI3_MAN2_FLAGS_TRACER_PRESENT (0x01) |
| struct mpi3_man5_phy_entry { |
| __le64 ioc_wwid; |
| __le64 device_name; |
| __le64 sata_wwid; |
| }; |
| |
| #ifndef MPI3_MAN5_PHY_MAX |
| #define MPI3_MAN5_PHY_MAX (1) |
| #endif |
| struct mpi3_man_page5 { |
| struct mpi3_config_page_header header; |
| u8 num_phys; |
| u8 reserved09[3]; |
| __le32 reserved0c; |
| struct mpi3_man5_phy_entry phy[MPI3_MAN5_PHY_MAX]; |
| }; |
| |
| #define MPI3_MAN5_PAGEVERSION (0x00) |
| struct mpi3_man6_gpio_entry { |
| u8 function_code; |
| u8 function_flags; |
| __le16 flags; |
| u8 param1; |
| u8 param2; |
| __le16 reserved06; |
| __le32 param3; |
| }; |
| |
| #define MPI3_MAN6_GPIO_FUNCTION_GENERIC (0x00) |
| #define MPI3_MAN6_GPIO_FUNCTION_ALTERNATE (0x01) |
| #define MPI3_MAN6_GPIO_FUNCTION_EXT_INTERRUPT (0x02) |
| #define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_ACTIVITY (0x03) |
| #define MPI3_MAN6_GPIO_FUNCTION_OVER_TEMPERATURE (0x04) |
| #define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_GREEN (0x05) |
| #define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_YELLOW (0x06) |
| #define MPI3_MAN6_GPIO_FUNCTION_CABLE_MANAGEMENT (0x07) |
| #define MPI3_MAN6_GPIO_FUNCTION_BKPLANE_MGMT_TYPE (0x08) |
| #define MPI3_MAN6_GPIO_FUNCTION_ISTWI_RESET (0x0a) |
| #define MPI3_MAN6_GPIO_FUNCTION_BACKEND_PCIE_RESET (0x0b) |
| #define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_FAULT (0x0c) |
| #define MPI3_MAN6_GPIO_FUNCTION_PBLP_STATUS_CHANGE (0x0d) |
| #define MPI3_MAN6_GPIO_FUNCTION_EPACK_ONLINE (0x0e) |
| #define MPI3_MAN6_GPIO_FUNCTION_EPACK_FAULT (0x0f) |
| #define MPI3_MAN6_GPIO_FUNCTION_CTRL_TYPE (0x10) |
| #define MPI3_MAN6_GPIO_FUNCTION_LICENSE (0x11) |
| #define MPI3_MAN6_GPIO_FUNCTION_REFCLK_CONTROL (0x12) |
| #define MPI3_MAN6_GPIO_FUNCTION_BACKEND_PCIE_RESET_CLAMP (0x13) |
| #define MPI3_MAN6_GPIO_FUNCTION_AUXILIARY_POWER (0x14) |
| #define MPI3_MAN6_GPIO_FUNCTION_RAID_DATA_CACHE_DIRTY (0x15) |
| #define MPI3_MAN6_GPIO_FUNCTION_BOARD_FAN_CONTROL (0x16) |
| #define MPI3_MAN6_GPIO_FUNCTION_BOARD_FAN_FAULT (0x17) |
| #define MPI3_MAN6_GPIO_FUNCTION_POWER_BRAKE (0x18) |
| #define MPI3_MAN6_GPIO_ISTWI_RESET_FUNCTIONFLAGS_DEVSELECT_MASK (0x01) |
| #define MPI3_MAN6_GPIO_ISTWI_RESET_FUNCTIONFLAGS_DEVSELECT_ISTWI (0x00) |
| #define MPI3_MAN6_GPIO_ISTWI_RESET_FUNCTIONFLAGS_DEVSELECT_RECEPTACLEID (0x01) |
| #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_MASK (0xf0) |
| #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC (0x00) |
| #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT (0x10) |
| #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT (0x20) |
| #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK (0x01) |
| #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE (0x00) |
| #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL (0x01) |
| #define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ALL_UP (0x00) |
| #define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ONE_OR_MORE_UP (0x01) |
| #define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_MODULE_PRESENT (0x00) |
| #define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_ACTIVE_CABLE_ENABLE (0x01) |
| #define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_CABLE_MGMT_ENABLE (0x02) |
| #define MPI3_MAN6_GPIO_LICENSE_PARAM1_TYPE_IBUTTON (0x00) |
| #define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_MASK (0x0100) |
| #define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_FAST_EDGE (0x0100) |
| #define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_SLOW_EDGE (0x0000) |
| #define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_MASK (0x00c0) |
| #define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_100OHM (0x0000) |
| #define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_66OHM (0x0040) |
| #define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_50OHM (0x0080) |
| #define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_33OHM (0x00c0) |
| #define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_MASK (0x0030) |
| #define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_SHIFT (4) |
| #define MPI3_MAN6_GPIO_FLAGS_ACTIVE_HIGH (0x0008) |
| #define MPI3_MAN6_GPIO_FLAGS_BI_DIR_ENABLED (0x0004) |
| #define MPI3_MAN6_GPIO_FLAGS_DIRECTION_MASK (0x0003) |
| #define MPI3_MAN6_GPIO_FLAGS_DIRECTION_INPUT (0x0000) |
| #define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_DRAIN_OUTPUT (0x0001) |
| #define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_SOURCE_OUTPUT (0x0002) |
| #define MPI3_MAN6_GPIO_FLAGS_DIRECTION_PUSH_PULL_OUTPUT (0x0003) |
| #ifndef MPI3_MAN6_GPIO_MAX |
| #define MPI3_MAN6_GPIO_MAX (1) |
| #endif |
| struct mpi3_man_page6 { |
| struct mpi3_config_page_header header; |
| __le16 flags; |
| __le16 reserved0a; |
| u8 num_gpio; |
| u8 reserved0d[3]; |
| struct mpi3_man6_gpio_entry gpio[MPI3_MAN6_GPIO_MAX]; |
| }; |
| |
| #define MPI3_MAN6_PAGEVERSION (0x00) |
| #define MPI3_MAN6_FLAGS_HEARTBEAT_LED_DISABLED (0x0001) |
| struct mpi3_man7_receptacle_info { |
| __le32 name[4]; |
| u8 location; |
| u8 connector_type; |
| u8 ped_clk; |
| u8 connector_id; |
| __le32 reserved14; |
| }; |
| |
| #define MPI3_MAN7_LOCATION_UNKNOWN (0x00) |
| #define MPI3_MAN7_LOCATION_INTERNAL (0x01) |
| #define MPI3_MAN7_LOCATION_EXTERNAL (0x02) |
| #define MPI3_MAN7_LOCATION_VIRTUAL (0x03) |
| #define MPI3_MAN7_LOCATION_HOST (0x04) |
| #define MPI3_MAN7_CONNECTOR_TYPE_NO_INFO (0x00) |
| #define MPI3_MAN7_PEDCLK_ROUTING_MASK (0x10) |
| #define MPI3_MAN7_PEDCLK_ROUTING_DIRECT (0x00) |
| #define MPI3_MAN7_PEDCLK_ROUTING_CLOCK_BUFFER (0x10) |
| #define MPI3_MAN7_PEDCLK_ID_MASK (0x0f) |
| #ifndef MPI3_MAN7_RECEPTACLE_INFO_MAX |
| #define MPI3_MAN7_RECEPTACLE_INFO_MAX (1) |
| #endif |
| struct mpi3_man_page7 { |
| struct mpi3_config_page_header header; |
| __le32 flags; |
| u8 num_receptacles; |
| u8 reserved0d[3]; |
| __le32 enclosure_name[4]; |
| struct mpi3_man7_receptacle_info receptacle_info[MPI3_MAN7_RECEPTACLE_INFO_MAX]; |
| }; |
| |
| #define MPI3_MAN7_PAGEVERSION (0x00) |
| #define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_MASK (0x01) |
| #define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_0 (0x00) |
| #define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_1 (0x01) |
| struct mpi3_man8_phy_info { |
| u8 receptacle_id; |
| u8 connector_lane; |
| __le16 reserved02; |
| __le16 slotx1; |
| __le16 slotx2; |
| __le16 slotx4; |
| __le16 reserved0a; |
| __le32 reserved0c; |
| }; |
| |
| #define MPI3_MAN8_PHY_INFO_RECEPTACLE_ID_NOT_ASSOCIATED (0xff) |
| #define MPI3_MAN8_PHY_INFO_CONNECTOR_LANE_NOT_ASSOCIATED (0xff) |
| #ifndef MPI3_MAN8_PHY_INFO_MAX |
| #define MPI3_MAN8_PHY_INFO_MAX (1) |
| #endif |
| struct mpi3_man_page8 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_phys; |
| u8 reserved0d[3]; |
| struct mpi3_man8_phy_info phy_info[MPI3_MAN8_PHY_INFO_MAX]; |
| }; |
| |
| #define MPI3_MAN8_PAGEVERSION (0x00) |
| struct mpi3_man9_rsrc_entry { |
| __le32 maximum; |
| __le32 decrement; |
| __le32 minimum; |
| __le32 actual; |
| }; |
| |
| enum mpi3_man9_resources { |
| MPI3_MAN9_RSRC_OUTSTANDING_REQS = 0, |
| MPI3_MAN9_RSRC_TARGET_CMDS = 1, |
| MPI3_MAN9_RSRC_RESERVED02 = 2, |
| MPI3_MAN9_RSRC_NVME = 3, |
| MPI3_MAN9_RSRC_INITIATORS = 4, |
| MPI3_MAN9_RSRC_VDS = 5, |
| MPI3_MAN9_RSRC_ENCLOSURES = 6, |
| MPI3_MAN9_RSRC_ENCLOSURE_PHYS = 7, |
| MPI3_MAN9_RSRC_EXPANDERS = 8, |
| MPI3_MAN9_RSRC_PCIE_SWITCHES = 9, |
| MPI3_MAN9_RSRC_RESERVED10 = 10, |
| MPI3_MAN9_RSRC_HOST_PD_DRIVES = 11, |
| MPI3_MAN9_RSRC_ADV_HOST_PD_DRIVES = 12, |
| MPI3_MAN9_RSRC_RAID_PD_DRIVES = 13, |
| MPI3_MAN9_RSRC_DRV_DIAG_BUF = 14, |
| MPI3_MAN9_RSRC_NAMESPACE_COUNT = 15, |
| MPI3_MAN9_RSRC_NUM_RESOURCES |
| }; |
| |
| #define MPI3_MAN9_MIN_OUTSTANDING_REQS (1) |
| #define MPI3_MAN9_MAX_OUTSTANDING_REQS (65000) |
| #define MPI3_MAN9_MIN_TARGET_CMDS (0) |
| #define MPI3_MAN9_MAX_TARGET_CMDS (65535) |
| #define MPI3_MAN9_MIN_NVME_TARGETS (0) |
| #define MPI3_MAN9_MIN_INITIATORS (0) |
| #define MPI3_MAN9_MIN_VDS (0) |
| #define MPI3_MAN9_MIN_ENCLOSURES (1) |
| #define MPI3_MAN9_MAX_ENCLOSURES (65535) |
| #define MPI3_MAN9_MIN_ENCLOSURE_PHYS (0) |
| #define MPI3_MAN9_MIN_EXPANDERS (0) |
| #define MPI3_MAN9_MAX_EXPANDERS (65535) |
| #define MPI3_MAN9_MIN_PCIE_SWITCHES (0) |
| #define MPI3_MAN9_MIN_HOST_PD_DRIVES (0) |
| #define MPI3_MAN9_ADV_HOST_PD_DRIVES (0) |
| #define MPI3_MAN9_RAID_PD_DRIVES (0) |
| #define MPI3_MAN9_DRIVER_DIAG_BUFFER (0) |
| #define MPI3_MAN9_MIN_NAMESPACE_COUNT (1) |
| #define MPI3_MAN9_MIN_EXPANDERS (0) |
| #define MPI3_MAN9_MAX_EXPANDERS (65535) |
| struct mpi3_man_page9 { |
| struct mpi3_config_page_header header; |
| u8 num_resources; |
| u8 reserved09; |
| __le16 reserved0a; |
| __le32 reserved0c; |
| __le32 reserved10; |
| __le32 reserved14; |
| __le32 reserved18; |
| __le32 reserved1c; |
| struct mpi3_man9_rsrc_entry resource[MPI3_MAN9_RSRC_NUM_RESOURCES]; |
| }; |
| |
| #define MPI3_MAN9_PAGEVERSION (0x00) |
| struct mpi3_man10_istwi_ctrlr_entry { |
| __le16 slave_address; |
| __le16 flags; |
| u8 scl_low_override; |
| u8 scl_high_override; |
| __le16 reserved06; |
| }; |
| |
| #define MPI3_MAN10_ISTWI_CTRLR_FLAGS_BUS_SPEED_MASK (0x000c) |
| #define MPI3_MAN10_ISTWI_CTRLR_FLAGS_BUS_SPEED_100K (0x0000) |
| #define MPI3_MAN10_ISTWI_CTRLR_FLAGS_BUS_SPEED_400K (0x0004) |
| #define MPI3_MAN10_ISTWI_CTRLR_FLAGS_SLAVE_ENABLED (0x0002) |
| #define MPI3_MAN10_ISTWI_CTRLR_FLAGS_MASTER_ENABLED (0x0001) |
| #ifndef MPI3_MAN10_ISTWI_CTRLR_MAX |
| #define MPI3_MAN10_ISTWI_CTRLR_MAX (1) |
| #endif |
| struct mpi3_man_page10 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_istwi_ctrl; |
| u8 reserved0d[3]; |
| struct mpi3_man10_istwi_ctrlr_entry istwi_controller[MPI3_MAN10_ISTWI_CTRLR_MAX]; |
| }; |
| |
| #define MPI3_MAN10_PAGEVERSION (0x00) |
| struct mpi3_man11_mux_device_format { |
| u8 max_channel; |
| u8 reserved01[3]; |
| __le32 reserved04; |
| }; |
| |
| struct mpi3_man11_temp_sensor_device_format { |
| u8 type; |
| u8 reserved01[3]; |
| u8 temp_channel[4]; |
| }; |
| |
| #define MPI3_MAN11_TEMP_SENSOR_TYPE_MAX6654 (0x00) |
| #define MPI3_MAN11_TEMP_SENSOR_TYPE_EMC1442 (0x01) |
| #define MPI3_MAN11_TEMP_SENSOR_TYPE_ADT7476 (0x02) |
| #define MPI3_MAN11_TEMP_SENSOR_TYPE_SE97B (0x03) |
| #define MPI3_MAN11_TEMP_SENSOR_CHANNEL_LOCATION_MASK (0xe0) |
| #define MPI3_MAN11_TEMP_SENSOR_CHANNEL_LOCATION_SHIFT (5) |
| #define MPI3_MAN11_TEMP_SENSOR_CHANNEL_ENABLED (0x01) |
| struct mpi3_man11_seeprom_device_format { |
| u8 size; |
| u8 page_write_size; |
| __le16 reserved02; |
| __le32 reserved04; |
| }; |
| |
| #define MPI3_MAN11_SEEPROM_SIZE_1KBITS (0x01) |
| #define MPI3_MAN11_SEEPROM_SIZE_2KBITS (0x02) |
| #define MPI3_MAN11_SEEPROM_SIZE_4KBITS (0x03) |
| #define MPI3_MAN11_SEEPROM_SIZE_8KBITS (0x04) |
| #define MPI3_MAN11_SEEPROM_SIZE_16KBITS (0x05) |
| #define MPI3_MAN11_SEEPROM_SIZE_32KBITS (0x06) |
| #define MPI3_MAN11_SEEPROM_SIZE_64KBITS (0x07) |
| #define MPI3_MAN11_SEEPROM_SIZE_128KBITS (0x08) |
| struct mpi3_man11_ddr_spd_device_format { |
| u8 channel; |
| u8 reserved01[3]; |
| __le32 reserved04; |
| }; |
| |
| struct mpi3_man11_cable_mgmt_device_format { |
| u8 type; |
| u8 receptacle_id; |
| __le16 reserved02; |
| __le32 reserved04; |
| }; |
| |
| #define MPI3_MAN11_CABLE_MGMT_TYPE_SFF_8636 (0x00) |
| struct mpi3_man11_bkplane_spec_ubm_format { |
| __le16 flags; |
| __le16 reserved02; |
| }; |
| |
| #define MPI3_MAN11_BKPLANE_UBM_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0200) |
| #define MPI3_MAN11_BKPLANE_UBM_FLAGS_FORCE_POLLING (0x0100) |
| #define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_MASK (0x00f0) |
| #define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_SHIFT (4) |
| #define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_MASK (0x000f) |
| #define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_SHIFT (0) |
| struct mpi3_man11_bkplane_spec_non_ubm_format { |
| __le16 flags; |
| u8 reserved02; |
| u8 type; |
| }; |
| |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_GROUP_MASK (0xf000) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_GROUP_SHIFT (12) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0200) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_LINKWIDTH_MASK (0x00c0) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_LINKWIDTH_4 (0x0000) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_LINKWIDTH_2 (0x0040) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_LINKWIDTH_1 (0x0080) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_PRESENCE_DETECT_MASK (0x0030) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_PRESENCE_DETECT_GPIO (0x0000) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_PRESENCE_DETECT_REG (0x0010) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_POLL_INTERVAL_MASK (0x000f) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_FLAGS_POLL_INTERVAL_SHIFT (0) |
| #define MPI3_MAN11_BKPLANE_NON_UBM_TYPE_VPP (0x00) |
| union mpi3_man11_bkplane_spec_format { |
| struct mpi3_man11_bkplane_spec_ubm_format ubm; |
| struct mpi3_man11_bkplane_spec_non_ubm_format non_ubm; |
| }; |
| |
| struct mpi3_man11_bkplane_mgmt_device_format { |
| u8 type; |
| u8 receptacle_id; |
| u8 reset_info; |
| u8 reserved03; |
| union mpi3_man11_bkplane_spec_format backplane_mgmt_specific; |
| }; |
| |
| #define MPI3_MAN11_BKPLANE_MGMT_TYPE_UBM (0x00) |
| #define MPI3_MAN11_BKPLANE_MGMT_TYPE_NON_UBM (0x01) |
| #define MPI3_MAN11_BACKPLANE_RESETINFO_ASSERT_TIME_MASK (0xf0) |
| #define MPI3_MAN11_BACKPLANE_RESETINFO_ASSERT_TIME_SHIFT (4) |
| #define MPI3_MAN11_BACKPLANE_RESETINFO_READY_TIME_MASK (0x0f) |
| #define MPI3_MAN11_BACKPLANE_RESETINFO_READY_TIME_SHIFT (0) |
| struct mpi3_man11_gas_gauge_device_format { |
| u8 type; |
| u8 reserved01[3]; |
| __le32 reserved04; |
| }; |
| |
| #define MPI3_MAN11_GAS_GAUGE_TYPE_STANDARD (0x00) |
| struct mpi3_man11_mgmt_ctrlr_device_format { |
| __le32 reserved00; |
| __le32 reserved04; |
| }; |
| struct mpi3_man11_board_fan_device_format { |
| u8 flags; |
| u8 reserved01; |
| u8 min_fan_speed; |
| u8 max_fan_speed; |
| __le32 reserved04; |
| }; |
| #define MPI3_MAN11_BOARD_FAN_FLAGS_FAN_CTRLR_TYPE_MASK (0x07) |
| #define MPI3_MAN11_BOARD_FAN_FLAGS_FAN_CTRLR_TYPE_AMC6821 (0x00) |
| union mpi3_man11_device_specific_format { |
| struct mpi3_man11_mux_device_format mux; |
| struct mpi3_man11_temp_sensor_device_format temp_sensor; |
| struct mpi3_man11_seeprom_device_format seeprom; |
| struct mpi3_man11_ddr_spd_device_format ddr_spd; |
| struct mpi3_man11_cable_mgmt_device_format cable_mgmt; |
| struct mpi3_man11_bkplane_mgmt_device_format bkplane_mgmt; |
| struct mpi3_man11_gas_gauge_device_format gas_gauge; |
| struct mpi3_man11_mgmt_ctrlr_device_format mgmt_controller; |
| struct mpi3_man11_board_fan_device_format board_fan; |
| __le32 words[2]; |
| }; |
| struct mpi3_man11_istwi_device_format { |
| u8 device_type; |
| u8 controller; |
| u8 reserved02; |
| u8 flags; |
| __le16 device_address; |
| u8 mux_channel; |
| u8 mux_index; |
| union mpi3_man11_device_specific_format device_specific; |
| }; |
| |
| #define MPI3_MAN11_ISTWI_DEVTYPE_MUX (0x00) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_TEMP_SENSOR (0x01) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_SEEPROM (0x02) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_DDR_SPD (0x03) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_CABLE_MGMT (0x04) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_BACKPLANE_MGMT (0x05) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_GAS_GAUGE (0x06) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_MGMT_CONTROLLER (0x07) |
| #define MPI3_MAN11_ISTWI_DEVTYPE_BOARD_FAN (0x08) |
| #define MPI3_MAN11_ISTWI_FLAGS_MUX_PRESENT (0x01) |
| #ifndef MPI3_MAN11_ISTWI_DEVICE_MAX |
| #define MPI3_MAN11_ISTWI_DEVICE_MAX (1) |
| #endif |
| struct mpi3_man_page11 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_istwi_dev; |
| u8 reserved0d[3]; |
| struct mpi3_man11_istwi_device_format istwi_device[MPI3_MAN11_ISTWI_DEVICE_MAX]; |
| }; |
| |
| #define MPI3_MAN11_PAGEVERSION (0x00) |
| #ifndef MPI3_MAN12_NUM_SGPIO_MAX |
| #define MPI3_MAN12_NUM_SGPIO_MAX (1) |
| #endif |
| struct mpi3_man12_sgpio_info { |
| u8 slot_count; |
| u8 reserved01[3]; |
| __le32 reserved04; |
| u8 phy_order[32]; |
| }; |
| |
| struct mpi3_man_page12 { |
| struct mpi3_config_page_header header; |
| __le32 flags; |
| __le32 s_clock_freq; |
| __le32 activity_modulation; |
| u8 num_sgpio; |
| u8 reserved15[3]; |
| __le32 reserved18; |
| __le32 reserved1c; |
| __le32 pattern[8]; |
| struct mpi3_man12_sgpio_info sgpio_info[MPI3_MAN12_NUM_SGPIO_MAX]; |
| }; |
| |
| #define MPI3_MAN12_PAGEVERSION (0x00) |
| #define MPI3_MAN12_FLAGS_ERROR_PRESENCE_ENABLED (0x0400) |
| #define MPI3_MAN12_FLAGS_ACTIVITY_INVERT_ENABLED (0x0200) |
| #define MPI3_MAN12_FLAGS_GROUP_ID_DISABLED (0x0100) |
| #define MPI3_MAN12_FLAGS_SIO_CLK_FILTER_ENABLED (0x0004) |
| #define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_MASK (0x0002) |
| #define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_PUSH_PULL (0x0000) |
| #define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_OPEN_DRAIN (0x0002) |
| #define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_MASK (0x0001) |
| #define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_PUSH_PULL (0x0000) |
| #define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_OPEN_DRAIN (0x0001) |
| #define MPI3_MAN12_SIO_CLK_FREQ_MIN (32) |
| #define MPI3_MAN12_SIO_CLK_FREQ_MAX (100000) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_MASK (0x0000f000) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_SHIFT (12) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_MASK (0x00000f00) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_SHIFT (8) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_MASK (0x000000f0) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_SHIFT (4) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_MASK (0x0000000f) |
| #define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_SHIFT (0) |
| #define MPI3_MAN12_PATTERN_RATE_MASK (0xe0000000) |
| #define MPI3_MAN12_PATTERN_RATE_2_HZ (0x00000000) |
| #define MPI3_MAN12_PATTERN_RATE_4_HZ (0x20000000) |
| #define MPI3_MAN12_PATTERN_RATE_8_HZ (0x40000000) |
| #define MPI3_MAN12_PATTERN_RATE_16_HZ (0x60000000) |
| #define MPI3_MAN12_PATTERN_RATE_10_HZ (0x80000000) |
| #define MPI3_MAN12_PATTERN_RATE_20_HZ (0xa0000000) |
| #define MPI3_MAN12_PATTERN_RATE_40_HZ (0xc0000000) |
| #define MPI3_MAN12_PATTERN_LENGTH_MASK (0x1f000000) |
| #define MPI3_MAN12_PATTERN_LENGTH_SHIFT (24) |
| #define MPI3_MAN12_PATTERN_BIT_PATTERN_MASK (0x00ffffff) |
| #define MPI3_MAN12_PATTERN_BIT_PATTERN_SHIFT (0) |
| #ifndef MPI3_MAN13_NUM_TRANSLATION_MAX |
| #define MPI3_MAN13_NUM_TRANSLATION_MAX (1) |
| #endif |
| struct mpi3_man13_translation_info { |
| __le32 slot_status; |
| __le32 mask; |
| u8 activity; |
| u8 locate; |
| u8 error; |
| u8 reserved0b; |
| }; |
| |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_FAULT (0x20000000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_OFF (0x10000000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_ACTIVITY (0x00800000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DO_NOT_REMOVE (0x00400000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_MISSING (0x00100000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_INSERT (0x00080000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REMOVAL (0x00040000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IDENTIFY (0x00020000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_OK (0x00008000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_RESERVED_DEVICE (0x00004000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_HOT_SPARE (0x00002000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000800) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_FAILED_ARRAY (0x00000400) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP (0x00000200) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP_ABORT (0x00000100) |
| #define MPI3_MAN13_TRANSLATION_SLOTSTATUS_PREDICTED_FAILURE (0x00000040) |
| #define MPI3_MAN13_BLINK_PATTERN_FORCE_OFF (0x00) |
| #define MPI3_MAN13_BLINK_PATTERN_FORCE_ON (0x01) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_0 (0x02) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_1 (0x03) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_2 (0x04) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_3 (0x05) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_4 (0x06) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_5 (0x07) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_6 (0x08) |
| #define MPI3_MAN13_BLINK_PATTERN_PATTERN_7 (0x09) |
| #define MPI3_MAN13_BLINK_PATTERN_ACTIVITY (0x0a) |
| #define MPI3_MAN13_BLINK_PATTERN_ACTIVITY_TRAIL (0x0b) |
| struct mpi3_man_page13 { |
| struct mpi3_config_page_header header; |
| u8 num_trans; |
| u8 reserved09[3]; |
| __le32 reserved0c; |
| struct mpi3_man13_translation_info translation[MPI3_MAN13_NUM_TRANSLATION_MAX]; |
| }; |
| |
| #define MPI3_MAN13_PAGEVERSION (0x00) |
| struct mpi3_man_page14 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_slot_groups; |
| u8 num_slots; |
| __le16 max_cert_chain_length; |
| __le32 sealed_slots; |
| __le32 populated_slots; |
| __le32 mgmt_pt_updatable_slots; |
| }; |
| #define MPI3_MAN14_PAGEVERSION (0x00) |
| #define MPI3_MAN14_NUMSLOTS_MAX (32) |
| #ifndef MPI3_MAN15_VERSION_RECORD_MAX |
| #define MPI3_MAN15_VERSION_RECORD_MAX 1 |
| #endif |
| struct mpi3_man15_version_record { |
| __le16 spdm_version; |
| __le16 reserved02; |
| }; |
| |
| struct mpi3_man_page15 { |
| struct mpi3_config_page_header header; |
| u8 num_version_records; |
| u8 reserved09[3]; |
| __le32 reserved0c; |
| struct mpi3_man15_version_record version_record[MPI3_MAN15_VERSION_RECORD_MAX]; |
| }; |
| |
| #define MPI3_MAN15_PAGEVERSION (0x00) |
| #ifndef MPI3_MAN16_CERT_ALGO_MAX |
| #define MPI3_MAN16_CERT_ALGO_MAX 1 |
| #endif |
| struct mpi3_man16_certificate_algorithm { |
| u8 slot_group; |
| u8 reserved01[3]; |
| __le32 base_asym_algo; |
| __le32 base_hash_algo; |
| __le32 reserved0c[3]; |
| }; |
| |
| struct mpi3_man_page16 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_cert_algos; |
| u8 reserved0d[3]; |
| struct mpi3_man16_certificate_algorithm certificate_algorithm[MPI3_MAN16_CERT_ALGO_MAX]; |
| }; |
| |
| #define MPI3_MAN16_PAGEVERSION (0x00) |
| #ifndef MPI3_MAN17_HASH_ALGORITHM_MAX |
| #define MPI3_MAN17_HASH_ALGORITHM_MAX 1 |
| #endif |
| struct mpi3_man17_hash_algorithm { |
| u8 meas_specification; |
| u8 reserved01[3]; |
| __le32 measurement_hash_algo; |
| __le32 reserved08[2]; |
| }; |
| |
| struct mpi3_man_page17 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_hash_algos; |
| u8 reserved0d[3]; |
| struct mpi3_man17_hash_algorithm hash_algorithm[MPI3_MAN17_HASH_ALGORITHM_MAX]; |
| }; |
| |
| #define MPI3_MAN17_PAGEVERSION (0x00) |
| struct mpi3_man_page20 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| __le32 nonpremium_features; |
| u8 allowed_personalities; |
| u8 reserved11[3]; |
| }; |
| |
| #define MPI3_MAN20_PAGEVERSION (0x00) |
| #define MPI3_MAN20_ALLOWEDPERSON_RAID_MASK (0x02) |
| #define MPI3_MAN20_ALLOWEDPERSON_RAID_ALLOWED (0x02) |
| #define MPI3_MAN20_ALLOWEDPERSON_RAID_NOT_ALLOWED (0x00) |
| #define MPI3_MAN20_ALLOWEDPERSON_EHBA_MASK (0x01) |
| #define MPI3_MAN20_ALLOWEDPERSON_EHBA_ALLOWED (0x01) |
| #define MPI3_MAN20_ALLOWEDPERSON_EHBA_NOT_ALLOWED (0x00) |
| #define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_MASK (0x01) |
| #define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_ENABLED (0x00) |
| #define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_DISABLED (0x01) |
| struct mpi3_man_page21 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| __le32 flags; |
| }; |
| |
| #define MPI3_MAN21_PAGEVERSION (0x00) |
| #define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_MASK (0x00000060) |
| #define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_BLOCK (0x00000000) |
| #define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_ALLOW (0x00000020) |
| #define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_WARN (0x00000040) |
| #define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_MASK (0x00000008) |
| #define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_ALLOW (0x00000000) |
| #define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_PREVENT (0x00000008) |
| #define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_MASK (0x00000001) |
| #define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_DEFAULT (0x00000000) |
| #define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_OEM_SPECIFIC (0x00000001) |
| #ifndef MPI3_MAN_PROD_SPECIFIC_MAX |
| #define MPI3_MAN_PROD_SPECIFIC_MAX (1) |
| #endif |
| struct mpi3_man_page_product_specific { |
| struct mpi3_config_page_header header; |
| __le32 product_specific_info[MPI3_MAN_PROD_SPECIFIC_MAX]; |
| }; |
| |
| struct mpi3_io_unit_page0 { |
| struct mpi3_config_page_header header; |
| __le64 unique_value; |
| __le32 nvdata_version_default; |
| __le32 nvdata_version_persistent; |
| }; |
| |
| #define MPI3_IOUNIT0_PAGEVERSION (0x00) |
| struct mpi3_io_unit_page1 { |
| struct mpi3_config_page_header header; |
| __le32 flags; |
| u8 dmd_io_delay; |
| u8 dmd_report_pcie; |
| u8 dmd_report_sata; |
| u8 dmd_report_sas; |
| }; |
| |
| #define MPI3_IOUNIT1_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_MASK (0x00000030) |
| #define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_ENABLE (0x00000000) |
| #define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_DISABLE (0x00000010) |
| #define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_NO_MODIFY (0x00000020) |
| #define MPI3_IOUNIT1_FLAGS_ATA_SECURITY_FREEZE_LOCK (0x00000008) |
| #define MPI3_IOUNIT1_FLAGS_WRITE_SAME_BUFFER (0x00000004) |
| #define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_MASK (0x00000003) |
| #define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_ENABLE (0x00000000) |
| #define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_DISABLE (0x00000001) |
| #define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_UNCHANGED (0x00000002) |
| #define MPI3_IOUNIT1_DMD_REPORT_DELAY_TIME_MASK (0x7f) |
| #define MPI3_IOUNIT1_DMD_REPORT_UNIT_16_SEC (0x80) |
| #ifndef MPI3_IO_UNIT2_GPIO_VAL_MAX |
| #define MPI3_IO_UNIT2_GPIO_VAL_MAX (1) |
| #endif |
| struct mpi3_io_unit_page2 { |
| struct mpi3_config_page_header header; |
| u8 gpio_count; |
| u8 reserved09[3]; |
| __le16 gpio_val[MPI3_IO_UNIT2_GPIO_VAL_MAX]; |
| }; |
| |
| #define MPI3_IOUNIT2_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT2_GPIO_FUNCTION_MASK (0xfffc) |
| #define MPI3_IOUNIT2_GPIO_FUNCTION_SHIFT (2) |
| #define MPI3_IOUNIT2_GPIO_SETTING_MASK (0x0001) |
| #define MPI3_IOUNIT2_GPIO_SETTING_OFF (0x0000) |
| #define MPI3_IOUNIT2_GPIO_SETTING_ON (0x0001) |
| struct mpi3_io_unit3_sensor { |
| __le16 flags; |
| u8 threshold_margin; |
| u8 reserved03; |
| __le16 threshold[3]; |
| __le16 reserved0a; |
| __le32 reserved0c; |
| __le32 reserved10; |
| __le32 reserved14; |
| }; |
| |
| #define MPI3_IOUNIT3_SENSOR_FLAGS_FATAL_EVENT_ENABLED (0x0010) |
| #define MPI3_IOUNIT3_SENSOR_FLAGS_FATAL_ACTION_ENABLED (0x0008) |
| #define MPI3_IOUNIT3_SENSOR_FLAGS_CRITICAL_EVENT_ENABLED (0x0004) |
| #define MPI3_IOUNIT3_SENSOR_FLAGS_CRITICAL_ACTION_ENABLED (0x0002) |
| #define MPI3_IOUNIT3_SENSOR_FLAGS_WARNING_EVENT_ENABLED (0x0001) |
| #ifndef MPI3_IO_UNIT3_SENSOR_MAX |
| #define MPI3_IO_UNIT3_SENSOR_MAX (1) |
| #endif |
| struct mpi3_io_unit_page3 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_sensors; |
| u8 nominal_poll_interval; |
| u8 warning_poll_interval; |
| u8 reserved0f; |
| struct mpi3_io_unit3_sensor sensor[MPI3_IO_UNIT3_SENSOR_MAX]; |
| }; |
| |
| #define MPI3_IOUNIT3_PAGEVERSION (0x00) |
| struct mpi3_io_unit4_sensor { |
| __le16 current_temperature; |
| __le16 reserved02; |
| u8 flags; |
| u8 reserved05[3]; |
| __le16 istwi_index; |
| u8 channel; |
| u8 reserved0b; |
| __le32 reserved0c; |
| }; |
| |
| #define MPI3_IOUNIT4_SENSOR_FLAGS_LOC_MASK (0xe0) |
| #define MPI3_IOUNIT4_SENSOR_FLAGS_LOC_SHIFT (5) |
| #define MPI3_IOUNIT4_SENSOR_FLAGS_TEMP_VALID (0x01) |
| #define MPI3_IOUNIT4_SENSOR_ISTWI_INDEX_INTERNAL (0xffff) |
| #define MPI3_IOUNIT4_SENSOR_CHANNEL_RESERVED (0xff) |
| #ifndef MPI3_IO_UNIT4_SENSOR_MAX |
| #define MPI3_IO_UNIT4_SENSOR_MAX (1) |
| #endif |
| struct mpi3_io_unit_page4 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_sensors; |
| u8 reserved0d[3]; |
| struct mpi3_io_unit4_sensor sensor[MPI3_IO_UNIT4_SENSOR_MAX]; |
| }; |
| |
| #define MPI3_IOUNIT4_PAGEVERSION (0x00) |
| struct mpi3_io_unit5_spinup_group { |
| u8 max_target_spinup; |
| u8 spinup_delay; |
| u8 spinup_flags; |
| u8 reserved03; |
| }; |
| |
| #define MPI3_IOUNIT5_SPINUP_FLAGS_DISABLE (0x01) |
| #ifndef MPI3_IO_UNIT5_PHY_MAX |
| #define MPI3_IO_UNIT5_PHY_MAX (4) |
| #endif |
| struct mpi3_io_unit_page5 { |
| struct mpi3_config_page_header header; |
| struct mpi3_io_unit5_spinup_group spinup_group_parameters[4]; |
| __le32 reserved18; |
| __le32 reserved1c; |
| __le16 device_shutdown; |
| __le16 reserved22; |
| u8 pcie_device_wait_time; |
| u8 sata_device_wait_time; |
| u8 spinup_encl_drive_count; |
| u8 spinup_encl_delay; |
| u8 num_phys; |
| u8 pe_initial_spinup_delay; |
| u8 topology_stable_time; |
| u8 flags; |
| u8 phy[MPI3_IO_UNIT5_PHY_MAX]; |
| }; |
| |
| #define MPI3_IOUNIT5_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_NO_ACTION (0x00) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_DIRECT_ATTACHED (0x01) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_EXPANDER_ATTACHED (0x02) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SWITCH_ATTACHED (0x02) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_DIRECT_AND_EXPANDER (0x03) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_DIRECT_AND_SWITCH (0x03) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SATA_HDD_MASK (0x0300) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SATA_HDD_SHIFT (8) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SAS_HDD_MASK (0x00c0) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SAS_HDD_SHIFT (6) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_NVME_SSD_MASK (0x0030) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_NVME_SSD_SHIFT (4) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SATA_SSD_MASK (0x000c) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SATA_SSD_SHIFT (2) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SAS_SSD_MASK (0x0003) |
| #define MPI3_IOUNIT5_DEVICE_SHUTDOWN_SAS_SSD_SHIFT (0) |
| #define MPI3_IOUNIT5_FLAGS_SATAPUIS_MASK (0x0c) |
| #define MPI3_IOUNIT5_FLAGS_SATAPUIS_NOT_SUPPORTED (0x00) |
| #define MPI3_IOUNIT5_FLAGS_SATAPUIS_OS_CONTROLLED (0x04) |
| #define MPI3_IOUNIT5_FLAGS_SATAPUIS_APP_CONTROLLED (0x08) |
| #define MPI3_IOUNIT5_FLAGS_SATAPUIS_BLOCKED (0x0c) |
| #define MPI3_IOUNIT5_FLAGS_POWER_CAPABLE_SPINUP (0x02) |
| #define MPI3_IOUNIT5_FLAGS_AUTO_PORT_ENABLE (0x01) |
| #define MPI3_IOUNIT5_PHY_SPINUP_GROUP_MASK (0x03) |
| struct mpi3_io_unit_page6 { |
| struct mpi3_config_page_header header; |
| __le32 board_power_requirement; |
| __le32 pci_slot_power_allocation; |
| u8 flags; |
| u8 reserved11[3]; |
| }; |
| |
| #define MPI3_IOUNIT6_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT6_FLAGS_ACT_CABLE_PWR_EXC (0x01) |
| #ifndef MPI3_IOUNIT8_DIGEST_MAX |
| #define MPI3_IOUNIT8_DIGEST_MAX (1) |
| #endif |
| union mpi3_iounit8_digest { |
| __le32 dword[16]; |
| __le16 word[32]; |
| u8 byte[64]; |
| }; |
| |
| struct mpi3_io_unit_page8 { |
| struct mpi3_config_page_header header; |
| u8 sb_mode; |
| u8 sb_state; |
| __le16 reserved0a; |
| u8 num_slots; |
| u8 slots_available; |
| u8 current_key_encryption_algo; |
| u8 key_digest_hash_algo; |
| union mpi3_version_union current_svn; |
| __le32 reserved14; |
| __le32 current_key[128]; |
| union mpi3_iounit8_digest digest[MPI3_IOUNIT8_DIGEST_MAX]; |
| }; |
| |
| #define MPI3_IOUNIT8_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT8_SBMODE_SECURE_DEBUG (0x04) |
| #define MPI3_IOUNIT8_SBMODE_HARD_SECURE (0x02) |
| #define MPI3_IOUNIT8_SBMODE_CONFIG_SECURE (0x01) |
| #define MPI3_IOUNIT8_SBSTATE_SVN_UPDATE_PENDING (0x04) |
| #define MPI3_IOUNIT8_SBSTATE_KEY_UPDATE_PENDING (0x02) |
| #define MPI3_IOUNIT8_SBSTATE_SECURE_BOOT_ENABLED (0x01) |
| struct mpi3_io_unit_page9 { |
| struct mpi3_config_page_header header; |
| __le32 flags; |
| __le16 first_device; |
| __le16 reserved0e; |
| }; |
| |
| #define MPI3_IOUNIT9_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT9_FLAGS_UBM_ENCLOSURE_ORDER_MASK (0x00000006) |
| #define MPI3_IOUNIT9_FLAGS_UBM_ENCLOSURE_ORDER_SHIFT (1) |
| #define MPI3_IOUNIT9_FLAGS_UBM_ENCLOSURE_ORDER_NONE (0x00000000) |
| #define MPI3_IOUNIT9_FLAGS_UBM_ENCLOSURE_ORDER_RECEPTACLE (0x00000002) |
| #define MPI3_IOUNIT9_FLAGS_UBM_ENCLOSURE_ORDER_BACKPLANE_TYPE (0x00000004) |
| #define MPI3_IOUNIT9_FLAGS_VDFIRST_ENABLED (0x00000001) |
| #define MPI3_IOUNIT9_FIRSTDEVICE_UNKNOWN (0xffff) |
| struct mpi3_io_unit_page10 { |
| struct mpi3_config_page_header header; |
| u8 flags; |
| u8 reserved09[3]; |
| __le32 silicon_id; |
| u8 fw_version_minor; |
| u8 fw_version_major; |
| u8 hw_version_minor; |
| u8 hw_version_major; |
| u8 part_number[16]; |
| }; |
| #define MPI3_IOUNIT10_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT10_FLAGS_VALID (0x01) |
| #define MPI3_IOUNIT10_FLAGS_ACTIVEID_MASK (0x02) |
| #define MPI3_IOUNIT10_FLAGS_ACTIVEID_FIRST_REGION (0x00) |
| #define MPI3_IOUNIT10_FLAGS_ACTIVEID_SECOND_REGION (0x02) |
| #define MPI3_IOUNIT10_FLAGS_PBLP_EXPECTED (0x80) |
| #ifndef MPI3_IOUNIT11_PROFILE_MAX |
| #define MPI3_IOUNIT11_PROFILE_MAX (1) |
| #endif |
| struct mpi3_iounit11_profile { |
| u8 profile_identifier; |
| u8 reserved01[3]; |
| __le16 max_vds; |
| __le16 max_host_pds; |
| __le16 max_adv_host_pds; |
| __le16 max_raid_pds; |
| __le16 max_nvme; |
| __le16 max_outstanding_requests; |
| __le16 subsystem_id; |
| __le16 reserved12; |
| __le32 reserved14[2]; |
| }; |
| struct mpi3_io_unit_page11 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_profiles; |
| u8 current_profile_identifier; |
| __le16 reserved0e; |
| struct mpi3_iounit11_profile profile[MPI3_IOUNIT11_PROFILE_MAX]; |
| }; |
| #define MPI3_IOUNIT11_PAGEVERSION (0x00) |
| #ifndef MPI3_IOUNIT12_BUCKET_MAX |
| #define MPI3_IOUNIT12_BUCKET_MAX (1) |
| #endif |
| struct mpi3_iounit12_bucket { |
| u8 coalescing_depth; |
| u8 coalescing_timeout; |
| __le16 io_count_low_boundary; |
| __le32 reserved04; |
| }; |
| struct mpi3_io_unit_page12 { |
| struct mpi3_config_page_header header; |
| __le32 flags; |
| __le32 reserved0c[4]; |
| u8 num_buckets; |
| u8 reserved1d[3]; |
| struct mpi3_iounit12_bucket bucket[MPI3_IOUNIT12_BUCKET_MAX]; |
| }; |
| #define MPI3_IOUNIT12_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT12_FLAGS_NUMPASSES_MASK (0x00000300) |
| #define MPI3_IOUNIT12_FLAGS_NUMPASSES_SHIFT (8) |
| #define MPI3_IOUNIT12_FLAGS_NUMPASSES_8 (0x00000000) |
| #define MPI3_IOUNIT12_FLAGS_NUMPASSES_16 (0x00000100) |
| #define MPI3_IOUNIT12_FLAGS_NUMPASSES_32 (0x00000200) |
| #define MPI3_IOUNIT12_FLAGS_NUMPASSES_64 (0x00000300) |
| #define MPI3_IOUNIT12_FLAGS_PASSPERIOD_MASK (0x00000003) |
| #define MPI3_IOUNIT12_FLAGS_PASSPERIOD_DISABLED (0x00000000) |
| #define MPI3_IOUNIT12_FLAGS_PASSPERIOD_500US (0x00000001) |
| #define MPI3_IOUNIT12_FLAGS_PASSPERIOD_1MS (0x00000002) |
| #define MPI3_IOUNIT12_FLAGS_PASSPERIOD_2MS (0x00000003) |
| #ifndef MPI3_IOUNIT13_FUNC_MAX |
| #define MPI3_IOUNIT13_FUNC_MAX (1) |
| #endif |
| struct mpi3_iounit13_allowed_function { |
| __le16 sub_function; |
| u8 function_code; |
| u8 fuction_flags; |
| }; |
| #define MPI3_IOUNIT13_FUNCTION_FLAGS_ADMIN_BLOCKED (0x04) |
| #define MPI3_IOUNIT13_FUNCTION_FLAGS_OOB_BLOCKED (0x02) |
| #define MPI3_IOUNIT13_FUNCTION_FLAGS_CHECK_SUBFUNCTION_ENABLED (0x01) |
| struct mpi3_io_unit_page13 { |
| struct mpi3_config_page_header header; |
| __le16 flags; |
| __le16 reserved0a; |
| u8 num_allowed_functions; |
| u8 reserved0d[3]; |
| struct mpi3_iounit13_allowed_function allowed_function[MPI3_IOUNIT13_FUNC_MAX]; |
| }; |
| #define MPI3_IOUNIT13_PAGEVERSION (0x00) |
| #define MPI3_IOUNIT13_FLAGS_ADMIN_BLOCKED (0x0002) |
| #define MPI3_IOUNIT13_FLAGS_OOB_BLOCKED (0x0001) |
| struct mpi3_ioc_page0 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| __le16 vendor_id; |
| __le16 device_id; |
| u8 revision_id; |
| u8 reserved11[3]; |
| __le32 class_code; |
| __le16 subsystem_vendor_id; |
| __le16 subsystem_id; |
| }; |
| |
| #define MPI3_IOC0_PAGEVERSION (0x00) |
| struct mpi3_ioc_page1 { |
| struct mpi3_config_page_header header; |
| __le32 coalescing_timeout; |
| u8 coalescing_depth; |
| u8 obsolete; |
| __le16 reserved0e; |
| }; |
| #define MPI3_IOC1_PAGEVERSION (0x00) |
| #ifndef MPI3_IOC2_EVENTMASK_WORDS |
| #define MPI3_IOC2_EVENTMASK_WORDS (4) |
| #endif |
| struct mpi3_ioc_page2 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| __le16 sas_broadcast_primitive_masks; |
| __le16 sas_notify_primitive_masks; |
| __le32 event_masks[MPI3_IOC2_EVENTMASK_WORDS]; |
| }; |
| |
| #define MPI3_IOC2_PAGEVERSION (0x00) |
| #define MPI3_DRIVER_FLAGS_ADMINRAIDPD_BLOCKED (0x0010) |
| #define MPI3_DRIVER_FLAGS_OOBRAIDPD_BLOCKED (0x0008) |
| #define MPI3_DRIVER_FLAGS_OOBRAIDVD_BLOCKED (0x0004) |
| #define MPI3_DRIVER_FLAGS_OOBADVHOSTPD_BLOCKED (0x0002) |
| #define MPI3_DRIVER_FLAGS_OOBHOSTPD_BLOCKED (0x0001) |
| struct mpi3_allowed_cmd_scsi { |
| __le16 service_action; |
| u8 operation_code; |
| u8 command_flags; |
| }; |
| |
| struct mpi3_allowed_cmd_ata { |
| u8 subcommand; |
| u8 reserved01; |
| u8 command; |
| u8 command_flags; |
| }; |
| |
| struct mpi3_allowed_cmd_nvme { |
| u8 reserved00; |
| u8 nvme_cmd_flags; |
| u8 op_code; |
| u8 command_flags; |
| }; |
| |
| #define MPI3_DRIVER_ALLOWEDCMD_NVMECMDFLAGS_SUBQ_TYPE_MASK (0x80) |
| #define MPI3_DRIVER_ALLOWEDCMD_NVMECMDFLAGS_SUBQ_TYPE_IO (0x00) |
| #define MPI3_DRIVER_ALLOWEDCMD_NVMECMDFLAGS_SUBQ_TYPE_ADMIN (0x80) |
| #define MPI3_DRIVER_ALLOWEDCMD_NVMECMDFLAGS_CMDSET_MASK (0x3f) |
| #define MPI3_DRIVER_ALLOWEDCMD_NVMECMDFLAGS_CMDSET_NVM (0x00) |
| union mpi3_allowed_cmd { |
| struct mpi3_allowed_cmd_scsi scsi; |
| struct mpi3_allowed_cmd_ata ata; |
| struct mpi3_allowed_cmd_nvme nvme; |
| }; |
| |
| #define MPI3_DRIVER_ALLOWEDCMD_CMDFLAGS_ADMINRAIDPD_BLOCKED (0x20) |
| #define MPI3_DRIVER_ALLOWEDCMD_CMDFLAGS_OOBRAIDPD_BLOCKED (0x10) |
| #define MPI3_DRIVER_ALLOWEDCMD_CMDFLAGS_OOBRAIDVD_BLOCKED (0x08) |
| #define MPI3_DRIVER_ALLOWEDCMD_CMDFLAGS_OOBADVHOSTPD_BLOCKED (0x04) |
| #define MPI3_DRIVER_ALLOWEDCMD_CMDFLAGS_OOBHOSTPD_BLOCKED (0x02) |
| #define MPI3_DRIVER_ALLOWEDCMD_CMDFLAGS_CHECKSUBCMD_ENABLED (0x01) |
| #ifndef MPI3_ALLOWED_CMDS_MAX |
| #define MPI3_ALLOWED_CMDS_MAX (1) |
| #endif |
| struct mpi3_driver_page0 { |
| struct mpi3_config_page_header header; |
| __le32 bsd_options; |
| u8 ssu_timeout; |
| u8 io_timeout; |
| u8 tur_retries; |
| u8 tur_interval; |
| u8 reserved10; |
| u8 security_key_timeout; |
| __le16 reserved12; |
| __le32 reserved14; |
| __le32 reserved18; |
| }; |
| #define MPI3_DRIVER0_PAGEVERSION (0x00) |
| #define MPI3_DRIVER0_BSDOPTS_HEADLESS_MODE_ENABLE (0x00000008) |
| #define MPI3_DRIVER0_BSDOPTS_DIS_HII_CONFIG_UTIL (0x00000004) |
| #define MPI3_DRIVER0_BSDOPTS_REGISTRATION_MASK (0x00000003) |
| #define MPI3_DRIVER0_BSDOPTS_REGISTRATION_IOC_AND_DEVS (0x00000000) |
| #define MPI3_DRIVER0_BSDOPTS_REGISTRATION_IOC_ONLY (0x00000001) |
| struct mpi3_driver_page1 { |
| struct mpi3_config_page_header header; |
| __le32 flags; |
| __le32 reserved0c; |
| __le16 host_diag_trace_max_size; |
| __le16 host_diag_trace_min_size; |
| __le16 host_diag_trace_decrement_size; |
| __le16 reserved16; |
| __le16 host_diag_fw_max_size; |
| __le16 host_diag_fw_min_size; |
| __le16 host_diag_fw_decrement_size; |
| __le16 reserved1e; |
| __le16 host_diag_driver_max_size; |
| __le16 host_diag_driver_min_size; |
| __le16 host_diag_driver_decrement_size; |
| __le16 reserved26; |
| }; |
| |
| #define MPI3_DRIVER1_PAGEVERSION (0x00) |
| #ifndef MPI3_DRIVER2_TRIGGER_MAX |
| #define MPI3_DRIVER2_TRIGGER_MAX (1) |
| #endif |
| struct mpi3_driver2_trigger_event { |
| u8 type; |
| u8 flags; |
| u8 reserved02; |
| u8 event; |
| __le32 reserved04[3]; |
| }; |
| |
| struct mpi3_driver2_trigger_scsi_sense { |
| u8 type; |
| u8 flags; |
| __le16 reserved02; |
| u8 ascq; |
| u8 asc; |
| u8 sense_key; |
| u8 reserved07; |
| __le32 reserved08[2]; |
| }; |
| |
| #define MPI3_DRIVER2_TRIGGER_SCSI_SENSE_ASCQ_MATCH_ALL (0xff) |
| #define MPI3_DRIVER2_TRIGGER_SCSI_SENSE_ASC_MATCH_ALL (0xff) |
| #define MPI3_DRIVER2_TRIGGER_SCSI_SENSE_SENSE_KEY_MATCH_ALL (0xff) |
| struct mpi3_driver2_trigger_reply { |
| u8 type; |
| u8 flags; |
| __le16 ioc_status; |
| __le32 ioc_log_info; |
| __le32 ioc_log_info_mask; |
| __le32 reserved0c; |
| }; |
| |
| #define MPI3_DRIVER2_TRIGGER_REPLY_IOCSTATUS_MATCH_ALL (0xffff) |
| union mpi3_driver2_trigger_element { |
| struct mpi3_driver2_trigger_event event; |
| struct mpi3_driver2_trigger_scsi_sense scsi_sense; |
| struct mpi3_driver2_trigger_reply reply; |
| }; |
| |
| #define MPI3_DRIVER2_TRIGGER_TYPE_EVENT (0x00) |
| #define MPI3_DRIVER2_TRIGGER_TYPE_SCSI_SENSE (0x01) |
| #define MPI3_DRIVER2_TRIGGER_TYPE_REPLY (0x02) |
| #define MPI3_DRIVER2_TRIGGER_FLAGS_DIAG_TRACE_RELEASE (0x02) |
| #define MPI3_DRIVER2_TRIGGER_FLAGS_DIAG_FW_RELEASE (0x01) |
| struct mpi3_driver_page2 { |
| struct mpi3_config_page_header header; |
| __le64 master_trigger; |
| __le32 reserved10[3]; |
| u8 num_triggers; |
| u8 reserved1d[3]; |
| union mpi3_driver2_trigger_element trigger[MPI3_DRIVER2_TRIGGER_MAX]; |
| }; |
| |
| #define MPI3_DRIVER2_PAGEVERSION (0x00) |
| #define MPI3_DRIVER2_MASTERTRIGGER_DIAG_TRACE_RELEASE (0x8000000000000000ULL) |
| #define MPI3_DRIVER2_MASTERTRIGGER_DIAG_FW_RELEASE (0x4000000000000000ULL) |
| #define MPI3_DRIVER2_MASTERTRIGGER_SNAPDUMP (0x2000000000000000ULL) |
| #define MPI3_DRIVER2_MASTERTRIGGER_DEVICE_REMOVAL_ENABLED (0x0000000000000004ULL) |
| #define MPI3_DRIVER2_MASTERTRIGGER_TASK_MANAGEMENT_ENABLED (0x0000000000000002ULL) |
| struct mpi3_driver_page10 { |
| struct mpi3_config_page_header header; |
| __le16 flags; |
| __le16 reserved0a; |
| u8 num_allowed_commands; |
| u8 reserved0d[3]; |
| union mpi3_allowed_cmd allowed_command[MPI3_ALLOWED_CMDS_MAX]; |
| }; |
| |
| #define MPI3_DRIVER10_PAGEVERSION (0x00) |
| struct mpi3_driver_page20 { |
| struct mpi3_config_page_header header; |
| __le16 flags; |
| __le16 reserved0a; |
| u8 num_allowed_commands; |
| u8 reserved0d[3]; |
| union mpi3_allowed_cmd allowed_command[MPI3_ALLOWED_CMDS_MAX]; |
| }; |
| |
| #define MPI3_DRIVER20_PAGEVERSION (0x00) |
| struct mpi3_driver_page30 { |
| struct mpi3_config_page_header header; |
| __le16 flags; |
| __le16 reserved0a; |
| u8 num_allowed_commands; |
| u8 reserved0d[3]; |
| union mpi3_allowed_cmd allowed_command[MPI3_ALLOWED_CMDS_MAX]; |
| }; |
| |
| #define MPI3_DRIVER30_PAGEVERSION (0x00) |
| union mpi3_security_mac { |
| __le32 dword[16]; |
| __le16 word[32]; |
| u8 byte[64]; |
| }; |
| |
| union mpi3_security_nonce { |
| __le32 dword[16]; |
| __le16 word[32]; |
| u8 byte[64]; |
| }; |
| |
| union mpi3_security0_cert_chain { |
| __le32 dword[1024]; |
| __le16 word[2048]; |
| u8 byte[4096]; |
| }; |
| |
| struct mpi3_security_page0 { |
| struct mpi3_config_page_header header; |
| u8 slot_num_group; |
| u8 slot_num; |
| __le16 cert_chain_length; |
| u8 cert_chain_flags; |
| u8 reserved0d[3]; |
| __le32 base_asym_algo; |
| __le32 base_hash_algo; |
| __le32 reserved18[4]; |
| union mpi3_security_mac mac; |
| union mpi3_security_nonce nonce; |
| union mpi3_security0_cert_chain certificate_chain; |
| }; |
| |
| #define MPI3_SECURITY0_PAGEVERSION (0x00) |
| #define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_MASK (0x0e) |
| #define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_UNUSED (0x00) |
| #define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_CERBERUS (0x02) |
| #define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_SPDM (0x04) |
| #define MPI3_SECURITY0_CERTCHAIN_FLAGS_SEALED (0x01) |
| #ifndef MPI3_SECURITY1_KEY_RECORD_MAX |
| #define MPI3_SECURITY1_KEY_RECORD_MAX 1 |
| #endif |
| #ifndef MPI3_SECURITY1_PAD_MAX |
| #define MPI3_SECURITY1_PAD_MAX 1 |
| #endif |
| union mpi3_security1_key_data { |
| __le32 dword[128]; |
| __le16 word[256]; |
| u8 byte[512]; |
| }; |
| |
| struct mpi3_security1_key_record { |
| u8 flags; |
| u8 consumer; |
| __le16 key_data_size; |
| __le32 additional_key_data; |
| __le32 reserved08[2]; |
| union mpi3_security1_key_data key_data; |
| }; |
| |
| #define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_MASK (0x1f) |
| #define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_NOT_VALID (0x00) |
| #define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_HMAC (0x01) |
| #define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_AES (0x02) |
| #define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PRIVATE (0x03) |
| #define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PUBLIC (0x04) |
| #define MPI3_SECURITY1_KEY_RECORD_CONSUMER_NOT_VALID (0x00) |
| #define MPI3_SECURITY1_KEY_RECORD_CONSUMER_SAFESTORE (0x01) |
| #define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CERT_CHAIN (0x02) |
| #define MPI3_SECURITY1_KEY_RECORD_CONSUMER_DEVICE_KEY (0x03) |
| #define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CACHE_OFFLOAD (0x04) |
| struct mpi3_security_page1 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08[2]; |
| union mpi3_security_mac mac; |
| union mpi3_security_nonce nonce; |
| u8 num_keys; |
| u8 reserved91[3]; |
| __le32 reserved94[3]; |
| struct mpi3_security1_key_record key_record[MPI3_SECURITY1_KEY_RECORD_MAX]; |
| u8 pad[MPI3_SECURITY1_PAD_MAX]; |
| }; |
| |
| #define MPI3_SECURITY1_PAGEVERSION (0x00) |
| struct mpi3_sas_io_unit0_phy_data { |
| u8 io_unit_port; |
| u8 port_flags; |
| u8 phy_flags; |
| u8 negotiated_link_rate; |
| __le16 controller_phy_device_info; |
| __le16 reserved06; |
| __le16 attached_dev_handle; |
| __le16 controller_dev_handle; |
| __le32 discovery_status; |
| __le32 reserved10; |
| }; |
| |
| #ifndef MPI3_SAS_IO_UNIT0_PHY_MAX |
| #define MPI3_SAS_IO_UNIT0_PHY_MAX (1) |
| #endif |
| struct mpi3_sas_io_unit_page0 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_phys; |
| u8 init_status; |
| __le16 reserved0e; |
| struct mpi3_sas_io_unit0_phy_data phy_data[MPI3_SAS_IO_UNIT0_PHY_MAX]; |
| }; |
| |
| #define MPI3_SASIOUNIT0_PAGEVERSION (0x00) |
| #define MPI3_SASIOUNIT0_INITSTATUS_NO_ERRORS (0x00) |
| #define MPI3_SASIOUNIT0_INITSTATUS_NEEDS_INITIALIZATION (0x01) |
| #define MPI3_SASIOUNIT0_INITSTATUS_NO_TARGETS_ALLOCATED (0x02) |
| #define MPI3_SASIOUNIT0_INITSTATUS_BAD_NUM_PHYS (0x04) |
| #define MPI3_SASIOUNIT0_INITSTATUS_UNSUPPORTED_CONFIG (0x05) |
| #define MPI3_SASIOUNIT0_INITSTATUS_HOST_PHYS_ENABLED (0x06) |
| #define MPI3_SASIOUNIT0_INITSTATUS_PRODUCT_SPECIFIC_MIN (0xf0) |
| #define MPI3_SASIOUNIT0_INITSTATUS_PRODUCT_SPECIFIC_MAX (0xff) |
| #define MPI3_SASIOUNIT0_PORTFLAGS_DISC_IN_PROGRESS (0x08) |
| #define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG_MASK (0x03) |
| #define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG_IOUNIT1 (0x00) |
| #define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG_DYNAMIC (0x01) |
| #define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG_BACKPLANE (0x02) |
| #define MPI3_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) |
| #define MPI3_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) |
| #define MPI3_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) |
| #define MPI3_SASIOUNIT0_PHYFLAGS_VIRTUAL_PHY (0x02) |
| #define MPI3_SASIOUNIT0_PHYFLAGS_HOST_PHY (0x01) |
| struct mpi3_sas_io_unit1_phy_data { |
| u8 io_unit_port; |
| u8 port_flags; |
| u8 phy_flags; |
| u8 max_min_link_rate; |
| __le16 controller_phy_device_info; |
| __le16 max_target_port_connect_time; |
| __le32 reserved08; |
| }; |
| |
| #ifndef MPI3_SAS_IO_UNIT1_PHY_MAX |
| #define MPI3_SAS_IO_UNIT1_PHY_MAX (1) |
| #endif |
| struct mpi3_sas_io_unit_page1 { |
| struct mpi3_config_page_header header; |
| __le16 control_flags; |
| __le16 sas_narrow_max_queue_depth; |
| __le16 additional_control_flags; |
| __le16 sas_wide_max_queue_depth; |
| u8 num_phys; |
| u8 sata_max_q_depth; |
| __le16 reserved12; |
| struct mpi3_sas_io_unit1_phy_data phy_data[MPI3_SAS_IO_UNIT1_PHY_MAX]; |
| }; |
| |
| #define MPI3_SASIOUNIT1_PAGEVERSION (0x00) |
| #define MPI3_SASIOUNIT1_CONTROL_CONTROLLER_DEVICE_SELF_TEST (0x8000) |
| #define MPI3_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) |
| #define MPI3_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) |
| #define MPI3_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) |
| #define MPI3_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) |
| #define MPI3_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) |
| #define MPI3_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) |
| #define MPI3_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) |
| #define MPI3_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) |
| #define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_MASK (0x0001) |
| #define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_DEVICE_NAME (0x0000) |
| #define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_SAS_ADDRESS (0x0001) |
| #define MPI3_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100) |
| #define MPI3_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) |
| #define MPI3_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) |
| #define MPI3_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) |
| #define MPI3_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) |
| #define MPI3_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) |
| #define MPI3_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) |
| #define MPI3_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) |
| #define MPI3_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) |
| #define MPI3_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) |
| #define MPI3_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) |
| #define MPI3_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) |
| #define MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) |
| #define MPI3_SASIOUNIT1_MMLR_MAX_RATE_MASK (0xf0) |
| #define MPI3_SASIOUNIT1_MMLR_MAX_RATE_SHIFT (4) |
| #define MPI3_SASIOUNIT1_MMLR_MAX_RATE_6_0 (0xa0) |
| #define MPI3_SASIOUNIT1_MMLR_MAX_RATE_12_0 (0xb0) |
| #define MPI3_SASIOUNIT1_MMLR_MAX_RATE_22_5 (0xc0) |
| #define MPI3_SASIOUNIT1_MMLR_MIN_RATE_MASK (0x0f) |
| #define MPI3_SASIOUNIT1_MMLR_MIN_RATE_6_0 (0x0a) |
| #define MPI3_SASIOUNIT1_MMLR_MIN_RATE_12_0 (0x0b) |
| #define MPI3_SASIOUNIT1_MMLR_MIN_RATE_22_5 (0x0c) |
| struct mpi3_sas_io_unit2_phy_pm_settings { |
| u8 control_flags; |
| u8 reserved01; |
| __le16 inactivity_timer_exponent; |
| u8 sata_partial_timeout; |
| u8 reserved05; |
| u8 sata_slumber_timeout; |
| u8 reserved07; |
| u8 sas_partial_timeout; |
| u8 reserved09; |
| u8 sas_slumber_timeout; |
| u8 reserved0b; |
| }; |
| |
| #ifndef MPI3_SAS_IO_UNIT2_PHY_MAX |
| #define MPI3_SAS_IO_UNIT2_PHY_MAX (1) |
| #endif |
| struct mpi3_sas_io_unit_page2 { |
| struct mpi3_config_page_header header; |
| u8 num_phys; |
| u8 reserved09[3]; |
| __le32 reserved0c; |
| struct mpi3_sas_io_unit2_phy_pm_settings sas_phy_power_management_settings[MPI3_SAS_IO_UNIT2_PHY_MAX]; |
| }; |
| |
| #define MPI3_SASIOUNIT2_PAGEVERSION (0x00) |
| #define MPI3_SASIOUNIT2_CONTROL_SAS_SLUMBER_ENABLE (0x08) |
| #define MPI3_SASIOUNIT2_CONTROL_SAS_PARTIAL_ENABLE (0x04) |
| #define MPI3_SASIOUNIT2_CONTROL_SATA_SLUMBER_ENABLE (0x02) |
| #define MPI3_SASIOUNIT2_CONTROL_SATA_PARTIAL_ENABLE (0x01) |
| #define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_MASK (0x7000) |
| #define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_SHIFT (12) |
| #define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_MASK (0x0700) |
| #define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_SHIFT (8) |
| #define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_MASK (0x0070) |
| #define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_SHIFT (4) |
| #define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_MASK (0x0007) |
| #define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_SHIFT (0) |
| #define MPI3_SASIOUNIT2_ITE_EXP_TEN_SECONDS (7) |
| #define MPI3_SASIOUNIT2_ITE_EXP_ONE_SECOND (6) |
| #define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MILLISECONDS (5) |
| #define MPI3_SASIOUNIT2_ITE_EXP_TEN_MILLISECONDS (4) |
| #define MPI3_SASIOUNIT2_ITE_EXP_ONE_MILLISECOND (3) |
| #define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MICROSECONDS (2) |
| #define MPI3_SASIOUNIT2_ITE_EXP_TEN_MICROSECONDS (1) |
| #define MPI3_SASIOUNIT2_ITE_EXP_ONE_MICROSECOND (0) |
| struct mpi3_sas_io_unit_page3 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| __le32 power_management_capabilities; |
| }; |
| |
| #define MPI3_SASIOUNIT3_PAGEVERSION (0x00) |
| #define MPI3_SASIOUNIT3_PM_HOST_SAS_SLUMBER_MODE (0x00000800) |
| #define MPI3_SASIOUNIT3_PM_HOST_SAS_PARTIAL_MODE (0x00000400) |
| #define MPI3_SASIOUNIT3_PM_HOST_SATA_SLUMBER_MODE (0x00000200) |
| #define MPI3_SASIOUNIT3_PM_HOST_SATA_PARTIAL_MODE (0x00000100) |
| #define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) |
| #define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) |
| #define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) |
| #define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) |
| struct mpi3_sas_expander_page0 { |
| struct mpi3_config_page_header header; |
| u8 io_unit_port; |
| u8 report_gen_length; |
| __le16 enclosure_handle; |
| __le32 reserved0c; |
| __le64 sas_address; |
| __le32 discovery_status; |
| __le16 dev_handle; |
| __le16 parent_dev_handle; |
| __le16 expander_change_count; |
| __le16 expander_route_indexes; |
| u8 num_phys; |
| u8 sas_level; |
| __le16 flags; |
| __le16 stp_bus_inactivity_time_limit; |
| __le16 stp_max_connect_time_limit; |
| __le16 stp_smp_nexus_loss_time; |
| __le16 max_num_routed_sas_addresses; |
| __le64 active_zone_manager_sas_address; |
| __le16 zone_lock_inactivity_limit; |
| __le16 reserved3a; |
| u8 time_to_reduced_func; |
| u8 initial_time_to_reduced_func; |
| u8 max_reduced_func_time; |
| u8 exp_status; |
| }; |
| |
| #define MPI3_SASEXPANDER0_PAGEVERSION (0x00) |
| #define MPI3_SASEXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) |
| #define MPI3_SASEXPANDER0_FLAGS_ZONE_LOCKED (0x1000) |
| #define MPI3_SASEXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) |
| #define MPI3_SASEXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) |
| #define MPI3_SASEXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) |
| #define MPI3_SASEXPANDER0_FLAGS_ENABLED_ZONING (0x0100) |
| #define MPI3_SASEXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) |
| #define MPI3_SASEXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) |
| #define MPI3_SASEXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) |
| #define MPI3_SASEXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) |
| #define MPI3_SASEXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) |
| #define MPI3_SASEXPANDER0_ES_NOT_RESPONDING (0x02) |
| #define MPI3_SASEXPANDER0_ES_RESPONDING (0x03) |
| #define MPI3_SASEXPANDER0_ES_DELAY_NOT_RESPONDING (0x04) |
| struct mpi3_sas_expander_page1 { |
| struct mpi3_config_page_header header; |
| u8 io_unit_port; |
| u8 reserved09[3]; |
| u8 num_phys; |
| u8 phy; |
| __le16 num_table_entries_programmed; |
| u8 programmed_link_rate; |
| u8 hw_link_rate; |
| __le16 attached_dev_handle; |
| __le32 phy_info; |
| __le16 attached_device_info; |
| __le16 reserved1a; |
| __le16 expander_dev_handle; |
| u8 change_count; |
| u8 negotiated_link_rate; |
| u8 phy_identifier; |
| u8 attached_phy_identifier; |
| u8 reserved22; |
| u8 discovery_info; |
| __le32 attached_phy_info; |
| u8 zone_group; |
| u8 self_config_status; |
| __le16 reserved2a; |
| __le16 slot; |
| __le16 slot_index; |
| }; |
| |
| #define MPI3_SASEXPANDER1_PAGEVERSION (0x00) |
| #define MPI3_SASEXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) |
| #define MPI3_SASEXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) |
| #define MPI3_SASEXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) |
| #ifndef MPI3_SASEXPANDER2_MAX_NUM_PHYS |
| #define MPI3_SASEXPANDER2_MAX_NUM_PHYS (1) |
| #endif |
| struct mpi3_sasexpander2_phy_element { |
| u8 link_change_count; |
| u8 reserved01; |
| __le16 rate_change_count; |
| __le32 reserved04; |
| }; |
| |
| struct mpi3_sas_expander_page2 { |
| struct mpi3_config_page_header header; |
| u8 num_phys; |
| u8 reserved09; |
| __le16 dev_handle; |
| __le32 reserved0c; |
| struct mpi3_sasexpander2_phy_element phy[MPI3_SASEXPANDER2_MAX_NUM_PHYS]; |
| }; |
| |
| #define MPI3_SASEXPANDER2_PAGEVERSION (0x00) |
| struct mpi3_sas_port_page0 { |
| struct mpi3_config_page_header header; |
| u8 port_number; |
| u8 reserved09; |
| u8 port_width; |
| u8 reserved0b; |
| u8 zone_group; |
| u8 reserved0d[3]; |
| __le64 sas_address; |
| __le16 device_info; |
| __le16 reserved1a; |
| __le32 reserved1c; |
| }; |
| |
| #define MPI3_SASPORT0_PAGEVERSION (0x00) |
| struct mpi3_sas_phy_page0 { |
| struct mpi3_config_page_header header; |
| __le16 owner_dev_handle; |
| __le16 reserved0a; |
| __le16 attached_dev_handle; |
| u8 attached_phy_identifier; |
| u8 reserved0f; |
| __le32 attached_phy_info; |
| u8 programmed_link_rate; |
| u8 hw_link_rate; |
| u8 change_count; |
| u8 flags; |
| __le32 phy_info; |
| u8 negotiated_link_rate; |
| u8 reserved1d[3]; |
| __le16 slot; |
| __le16 slot_index; |
| }; |
| |
| #define MPI3_SASPHY0_PAGEVERSION (0x00) |
| #define MPI3_SASPHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) |
| struct mpi3_sas_phy_page1 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| __le32 invalid_dword_count; |
| __le32 running_disparity_error_count; |
| __le32 loss_dword_synch_count; |
| __le32 phy_reset_problem_count; |
| }; |
| |
| #define MPI3_SASPHY1_PAGEVERSION (0x00) |
| struct mpi3_sas_phy2_phy_event { |
| u8 phy_event_code; |
| u8 reserved01[3]; |
| __le32 phy_event_info; |
| }; |
| |
| #ifndef MPI3_SAS_PHY2_PHY_EVENT_MAX |
| #define MPI3_SAS_PHY2_PHY_EVENT_MAX (1) |
| #endif |
| struct mpi3_sas_phy_page2 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_phy_events; |
| u8 reserved0d[3]; |
| struct mpi3_sas_phy2_phy_event phy_event[MPI3_SAS_PHY2_PHY_EVENT_MAX]; |
| }; |
| |
| #define MPI3_SASPHY2_PAGEVERSION (0x00) |
| struct mpi3_sas_phy3_phy_event_config { |
| u8 phy_event_code; |
| u8 reserved01[3]; |
| u8 counter_type; |
| u8 threshold_window; |
| u8 time_units; |
| u8 reserved07; |
| __le32 event_threshold; |
| __le16 threshold_flags; |
| __le16 reserved0e; |
| }; |
| |
| #define MPI3_SASPHY3_EVENT_CODE_NO_EVENT (0x00) |
| #define MPI3_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) |
| #define MPI3_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) |
| #define MPI3_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) |
| #define MPI3_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) |
| #define MPI3_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_ERROR (0x06) |
| #define MPI3_SASPHY3_EVENT_CODE_INV_SPL_PACKETS (0x07) |
| #define MPI3_SASPHY3_EVENT_CODE_LOSS_SPL_PACKET_SYNC (0x08) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_BREAK (0x27) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_BREAK (0x28) |
| #define MPI3_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) |
| #define MPI3_SASPHY3_EVENT_CODE_CONNECTION (0x2a) |
| #define MPI3_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2b) |
| #define MPI3_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2c) |
| #define MPI3_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2d) |
| #define MPI3_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2e) |
| #define MPI3_SASPHY3_EVENT_CODE_PERSIST_CONN (0x2f) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) |
| #define MPI3_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) |
| #define MPI3_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xd0) |
| #define MPI3_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xd1) |
| #define MPI3_SASPHY3_EVENT_CODE_RX_AIP (0xd2) |
| #define MPI3_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xd3) |
| #define MPI3_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xd4) |
| #define MPI3_SASPHY3_EVENT_CODE_LCCONN_TIME (0xd5) |
| #define MPI3_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xd6) |
| #define MPI3_SASPHY3_EVENT_CODE_SATA_TX_START (0xd7) |
| #define MPI3_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xd8) |
| #define MPI3_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xd9) |
| #define MPI3_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xda) |
| #define MPI3_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xdb) |
| #define MPI3_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xdc) |
| #define MPI3_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) |
| #define MPI3_SASPHY3_COUNTER_TYPE_SATURATING (0x01) |
| #define MPI3_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) |
| #define MPI3_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) |
| #define MPI3_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) |
| #define MPI3_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) |
| #define MPI3_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) |
| #define MPI3_SASPHY3_TFLAGS_PHY_RESET (0x0002) |
| #define MPI3_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) |
| #ifndef MPI3_SAS_PHY3_PHY_EVENT_MAX |
| #define MPI3_SAS_PHY3_PHY_EVENT_MAX (1) |
| #endif |
| struct mpi3_sas_phy_page3 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_phy_events; |
| u8 reserved0d[3]; |
| struct mpi3_sas_phy3_phy_event_config phy_event_config[MPI3_SAS_PHY3_PHY_EVENT_MAX]; |
| }; |
| |
| #define MPI3_SASPHY3_PAGEVERSION (0x00) |
| struct mpi3_sas_phy_page4 { |
| struct mpi3_config_page_header header; |
| u8 reserved08[3]; |
| u8 flags; |
| u8 initial_frame[28]; |
| }; |
| |
| #define MPI3_SASPHY4_PAGEVERSION (0x00) |
| #define MPI3_SASPHY4_FLAGS_FRAME_VALID (0x02) |
| #define MPI3_SASPHY4_FLAGS_SATA_FRAME (0x01) |
| #define MPI3_PCIE_LINK_RETIMERS_MASK (0x30) |
| #define MPI3_PCIE_LINK_RETIMERS_SHIFT (4) |
| #define MPI3_PCIE_NEG_LINK_RATE_MASK (0x0f) |
| #define MPI3_PCIE_NEG_LINK_RATE_UNKNOWN (0x00) |
| #define MPI3_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01) |
| #define MPI3_PCIE_NEG_LINK_RATE_2_5 (0x02) |
| #define MPI3_PCIE_NEG_LINK_RATE_5_0 (0x03) |
| #define MPI3_PCIE_NEG_LINK_RATE_8_0 (0x04) |
| #define MPI3_PCIE_NEG_LINK_RATE_16_0 (0x05) |
| #define MPI3_PCIE_NEG_LINK_RATE_32_0 (0x06) |
| #define MPI3_PCIE_ASPM_ENABLE_NONE (0x0) |
| #define MPI3_PCIE_ASPM_ENABLE_L0S (0x1) |
| #define MPI3_PCIE_ASPM_ENABLE_L1 (0x2) |
| #define MPI3_PCIE_ASPM_ENABLE_L0S_L1 (0x3) |
| #define MPI3_PCIE_ASPM_SUPPORT_NONE (0x0) |
| #define MPI3_PCIE_ASPM_SUPPORT_L0S (0x1) |
| #define MPI3_PCIE_ASPM_SUPPORT_L1 (0x2) |
| #define MPI3_PCIE_ASPM_SUPPORT_L0S_L1 (0x3) |
| struct mpi3_pcie_io_unit0_phy_data { |
| u8 link; |
| u8 link_flags; |
| u8 phy_flags; |
| u8 negotiated_link_rate; |
| __le16 attached_dev_handle; |
| __le16 controller_dev_handle; |
| __le32 enumeration_status; |
| u8 io_unit_port; |
| u8 reserved0d[3]; |
| }; |
| |
| #define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_MASK (0x10) |
| #define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_IOUNIT1 (0x00) |
| #define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_BKPLANE (0x10) |
| #define MPI3_PCIEIOUNIT0_LINKFLAGS_ENUM_IN_PROGRESS (0x08) |
| #define MPI3_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) |
| #define MPI3_PCIEIOUNIT0_PHYFLAGS_HOST_PHY (0x01) |
| #define MPI3_PCIEIOUNIT0_ES_MAX_SWITCH_DEPTH_EXCEEDED (0x80000000) |
| #define MPI3_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000) |
| #define MPI3_PCIEIOUNIT0_ES_MAX_ENDPOINTS_EXCEEDED (0x20000000) |
| #define MPI3_PCIEIOUNIT0_ES_INSUFFICIENT_RESOURCES (0x10000000) |
| #ifndef MPI3_PCIE_IO_UNIT0_PHY_MAX |
| #define MPI3_PCIE_IO_UNIT0_PHY_MAX (1) |
| #endif |
| struct mpi3_pcie_io_unit_page0 { |
| struct mpi3_config_page_header header; |
| __le32 reserved08; |
| u8 num_phys; |
| u8 init_status; |
| u8 aspm; |
| u8 reserved0f; |
| struct mpi3_pcie_io_unit0_phy_data phy_data[MPI3_PCIE_IO_UNIT0_PHY_MAX]; |
| }; |
| |
| #define MPI3_PCIEIOUNIT0_PAGEVERSION (0x00) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_NO_ERRORS (0x00) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_NEEDS_INITIALIZATION (0x01) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_NO_TARGETS_ALLOCATED (0x02) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_RESOURCE_ALLOC_FAILED (0x03) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_NUM_PHYS (0x04) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_UNSUPPORTED_CONFIG (0x05) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_HOST_PORT_MISMATCH (0x06) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_PHYS_NOT_CONSECUTIVE (0x07) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_CLOCKING_MODE (0x08) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_START (0xf0) |
| #define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_END (0xff) |
| #define MPI3_PCIEIOUNIT0_ASPM_SWITCH_STATES_MASK (0xc0) |
| #define MPI3_PCIEIOUNIT0_ASPM_SWITCH_STATES_SHIFT (6) |
| #define MPI3_PCIEIOUNIT0_ASPM_DIRECT_STATES_MASK (0x30) |
| #define MPI3_PCIEIOUNIT0_ASPM_DIRECT_STATES_SHIFT (4) |
| #define MPI3_PCIEIOUNIT0_ASPM_SWITCH_SUPPORT_MASK (0x0c) |
| #define MPI3_PCIEIOUNIT0_ASPM_SWITCH_SUPPORT_SHIFT (2) |
| #define MPI3_PCIEIOUNIT0_ASPM_DIRECT_SUPPORT_MASK (0x03) |
| #define MPI3_PCIEIOUNIT0_ASPM_DIRECT_SUPPORT_SHIFT (0) |
| struct mpi3_pcie_io_unit1_phy_data { |
| u8 link; |
| u8 link_flags; |
| u8 phy_flags; |
| u8 max_min_link_rate; |
| __le32 reserved04; |
| __le32 reserved08; |
| }; |
| |
| #define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_MASK (0x03) |
| #define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_DIS_SEPARATE_REFCLK (0x00) |
| #define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRIS (0x01) |
| #define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRNS (0x02) |
| #define MPI3_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) |
| #define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_MASK (0xf0) |
| #define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_SHIFT (4) |
| #define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_2_5 (0x20) |
| #define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_5_0 (0x30) |
| #define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_8_0 (0x40) |
| #define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_16_0 (0x50) |
| #define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_32_0 (0x60) |
| #ifndef MPI3_PCIE_IO_UNIT1_PHY_MAX |
| #define MPI3_PCIE_IO_UNIT1_PHY_MAX (1) |
| #endif |
| struct mpi3_pcie_io_unit_page1 { |
| struct mpi3_config_page_header header; |
| __le32 control_flags; |
| __le32 reserved0c; |
| u8 num_phys; |
| u8 reserved11; |
| u8 aspm; |
| u8 reserved13; |
| struct mpi3_pcie_io_unit1_phy_data phy_data[MPI3_PCIE_IO_UNIT1_PHY_MAX]; |
| }; |
| |
| #define MPI3_PCIEIOUNIT1_PAGEVERSION (0x00) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_PERST_OVERRIDE_MASK (0xe0000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_PERST_OVERRIDE_NONE (0x00000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_PERST_OVERRIDE_DEASSERT (0x20000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_PERST_OVERRIDE_ASSERT (0x40000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_PERST_OVERRIDE_BACKPLANE_ERROR (0x60000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_REFCLK_OVERRIDE_MASK (0x1c000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_REFCLK_OVERRIDE_NONE (0x00000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_REFCLK_OVERRIDE_DEASSERT (0x04000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_REFCLK_OVERRIDE_ASSERT (0x08000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_REFCLK_OVERRIDE_BACKPLANE_ERROR (0x0c000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_OVERRIDE_DISABLE (0x00000080) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_CLOCK_OVERRIDE_DISABLE (0x00000040) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_CLOCK_OVERRIDE_MODE_MASK (0x00000030) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_CLOCK_OVERRIDE_MODE_SHIFT (4) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_CLOCK_OVERRIDE_MODE_SRIS_SRNS_DISABLED (0x00000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_CLOCK_OVERRIDE_MODE_SRIS_ENABLED (0x00000010) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_CLOCK_OVERRIDE_MODE_SRNS_ENABLED (0x00000020) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_RATE_OVERRIDE_MASK (0x0000000f) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_RATE_OVERRIDE_USE_BACKPLANE (0x00000000) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_RATE_OVERRIDE_MAX_2_5 (0x00000002) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_RATE_OVERRIDE_MAX_5_0 (0x00000003) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_RATE_OVERRIDE_MAX_8_0 (0x00000004) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_RATE_OVERRIDE_MAX_16_0 (0x00000005) |
| #define MPI3_PCIEIOUNIT1_CONTROL_FLAGS_LINK_RATE_OVERRIDE_MAX_32_0 (0x00000006) |
| #define MPI3_PCIEIOUNIT1_ASPM_SWITCH_MASK (0x0c) |
| #define MPI3_PCIEIOUNIT1_ASPM_SWITCH_SHIFT (2) |
| #define MPI3_PCIEIOUNIT1_ASPM_DIRECT_MASK (0x03) |
| #define MPI3_PCIEIOUNIT1_ASPM_DIRECT_SHIFT (0) |
| struct mpi3_pcie_io_unit_page2 { |
| struct mpi3_config_page_header header; |
| __le16 nvme_max_q_dx1; |
| __le16 nvme_max_q_dx2; |
| u8 nvme_abort_to; |
| u8 reserved0d; |
| __le16 nvme_max_q_dx4; |
| }; |
| |
| #define MPI3_PCIEIOUNIT2_PAGEVERSION (0x00) |
| #define MPI3_PCIEIOUNIT3_ERROR_RECEIVER_ERROR (0) |
| #define MPI3_PCIEIOUNIT3_ERROR_RECOVERY (1) |
| #define MPI3_PCIEIOUNIT3_ERROR_CORRECTABLE_ERROR_MSG (2) |
| #define MPI3_PCIEIOUNIT3_ERROR_BAD_DLLP (3) |
| #define MPI3_PCIEIOUNIT3_ERROR_BAD_TLP (4) |
| #define MPI3_PCIEIOUNIT3_NUM_ERROR_INDEX (5) |
| struct mpi3_pcie_io_unit3_error { |
| __le16 threshold_count; |
| __le16 reserved02; |
| }; |
| |
| struct mpi3_pcie_io_unit_page3 { |
| struct mpi3_config_page_header header; |
| u8 threshold_window; |
| u8 threshold_action; |
| u8 escalation_count; |
| u8 escalation_action; |
| u8 num_errors; |
| u8 reserved0d[3]; |
| struct mpi3_pcie_io_unit3_error error[MPI3_PCIEIOUNIT3_NUM_ERROR_INDEX]; |
| }; |
| |
| #define MPI3_PCIEIOUNIT3_PAGEVERSION (0x00) |
| #define MPI3_PCIEIOUNIT3_ACTION_NO_ACTION (0x00) |
| #define MPI3_PCIEIOUNIT3_ACTION_HOT_RESET (0x01) |
| #define MPI3_PCIEIOUNIT3_ACTION_REDUCE_LINK_RATE_ONLY (0x02) |
| #define MPI3_PCIEIOUNIT3_ACTION_REDUCE_LINK_RATE_NO_ACCESS (0x03) |
| struct mpi3_pcie_switch_page0 { |
| struct mpi3_config_page_header header; |
| u8 io_unit_port; |
| u8 switch_status; |
| u8 reserved0a[2]; |
| __le16 dev_handle; |
| __le16 parent_dev_handle; |
| u8 num_ports; |
| u8 pcie_level; |
| __le16 reserved12; |
| __le32 reserved14; |
| __le32 reserved18; |
| __le32 reserved1c; |
| }; |
| |
| #define MPI3_PCIESWITCH0_PAGEVERSION (0x00) |
| #define MPI3_PCIESWITCH0_SS_NOT_RESPONDING (0x02) |
| #define MPI3_PCIESWITCH0_SS_RESPONDING (0x03) |
| #define MPI3_PCIESWITCH0_SS_DELAY_NOT_RESPONDING (0x04) |
| struct mpi3_pcie_switch_page1 { |
| struct mpi3_config_page_header header; |
| u8 io_unit_port; |
| u8 flags; |
| __le16 reserved0a; |
| u8 num_ports; |
| u8 port_num; |
| __le16 attached_dev_handle; |
| __le16 switch_dev_handle; |
| u8 negotiated_port_width; |
| u8 negotiated_link_rate; |
| __le16 slot; |
| __le16 slot_index; |
| __le32 reserved18; |
| }; |
| |
| #define MPI3_PCIESWITCH1_PAGEVERSION (0x00) |
| #define MPI3_PCIESWITCH1_FLAGS_ASPMSTATE_MASK (0x0c) |
| #define MPI3_PCIESWITCH1_FLAGS_ASPMSTATE_SHIFT (2) |
| #define MPI3_PCIESWITCH1_FLAGS_ASPMSUPPORT_MASK (0x03) |
| #define MPI3_PCIESWITCH1_FLAGS_ASPMSUPPORT_SHIFT (0) |
| #ifndef MPI3_PCIESWITCH2_MAX_NUM_PORTS |
| #define MPI3_PCIESWITCH2_MAX_NUM_PORTS (1) |
| #endif |
| struct mpi3_pcieswitch2_port_element { |
| __le16 link_change_count; |
| __le16 rate_change_count; |
| __le32 reserved04; |
| }; |
| |
| struct mpi3_pcie_switch_page2 { |
| struct mpi3_config_page_header header; |
| u8 num_ports; |
| u8 reserved09; |
| __le16 dev_handle; |
| __le32 reserved0c; |
| struct mpi3_pcieswitch2_port_element port[MPI3_PCIESWITCH2_MAX_NUM_PORTS]; |
| }; |
| |
| #define MPI3_PCIESWITCH2_PAGEVERSION (0x00) |
| struct mpi3_pcie_link_page0 { |
| struct mpi3_config_page_header header; |
| u8 link; |
| u8 reserved09[3]; |
| __le32 reserved0c; |
| __le32 receiver_error_count; |
| __le32 recovery_count; |
| __le32 corr_error_msg_count; |
| __le32 non_fatal_error_msg_count; |
| __le32 fatal_error_msg_count; |
| __le32 non_fatal_error_count; |
| __le32 fatal_error_count; |
| __le32 bad_dllp_count; |
| __le32 bad_tlp_count; |
| }; |
| |
| #define MPI3_PCIELINK0_PAGEVERSION (0x00) |
| struct mpi3_enclosure_page0 { |
| struct mpi3_config_page_header header; |
| __le64 enclosure_logical_id; |
| __le16 flags; |
| __le16 enclosure_handle; |
| __le16 num_slots; |
| __le16 reserved16; |
| u8 io_unit_port; |
| u8 enclosure_level; |
| __le16 sep_dev_handle; |
| u8 chassis_slot; |
| u8 reserved1d[3]; |
| }; |
| |
| #define MPI3_ENCLOSURE0_PAGEVERSION (0x00) |
| #define MPI3_ENCLS0_FLAGS_ENCL_TYPE_MASK (0xc000) |
| #define MPI3_ENCLS0_FLAGS_ENCL_TYPE_VIRTUAL (0x0000) |
| #define MPI3_ENCLS0_FLAGS_ENCL_TYPE_SAS (0x4000) |
| #define MPI3_ENCLS0_FLAGS_ENCL_TYPE_PCIE (0x8000) |
| #define MPI3_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) |
| #define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT_MASK (0x0010) |
| #define MPI3_ENCLS0_FLAGS_ENCL_DEV_NOT_FOUND (0x0000) |
| #define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT (0x0010) |
| #define MPI3_ENCLS0_FLAGS_MNG_MASK (0x000f) |
| #define MPI3_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) |
| #define MPI3_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) |
| #define MPI3_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0002) |
| #define MPI3_DEVICE_DEVFORM_SAS_SATA (0x00) |
| #define MPI3_DEVICE_DEVFORM_PCIE (0x01) |
| #define MPI3_DEVICE_DEVFORM_VD (0x02) |
| struct mpi3_device0_sas_sata_format { |
| __le64 sas_address; |
| __le16 flags; |
| __le16 device_info; |
| u8 phy_num; |
| u8 attached_phy_identifier; |
| u8 max_port_connections; |
| u8 zone_group; |
| }; |
| |
| #define MPI3_DEVICE0_SASSATA_FLAGS_WRITE_SAME_UNMAP_NCQ (0x0400) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_SLUMBER_CAP (0x0200) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_PARTIAL_CAP (0x0100) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_ASYNC_NOTIFY (0x0080) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_SW_PRESERVE (0x0040) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_UNSUPP_DEV (0x0020) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_48BIT_LBA (0x0010) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_SMART_SUPP (0x0008) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_NCQ_SUPP (0x0004) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_FUA_SUPP (0x0002) |
| #define MPI3_DEVICE0_SASSATA_FLAGS_PERSIST_CAP (0x0001) |
| struct mpi3_device0_pcie_format { |
| u8 supported_link_rates; |
| u8 max_port_width; |
| u8 negotiated_port_width; |
| u8 negotiated_link_rate; |
| u8 port_num; |
| u8 controller_reset_to; |
| __le16 device_info; |
| __le32 maximum_data_transfer_size; |
| __le32 capabilities; |
| __le16 noiob; |
| u8 nvme_abort_to; |
| u8 page_size; |
| __le16 shutdown_latency; |
| u8 recovery_info; |
| u8 reserved17; |
| }; |
| |
| #define MPI3_DEVICE0_PCIE_LINK_RATE_32_0_SUPP (0x10) |
| #define MPI3_DEVICE0_PCIE_LINK_RATE_16_0_SUPP (0x08) |
| #define MPI3_DEVICE0_PCIE_LINK_RATE_8_0_SUPP (0x04) |
| #define MPI3_DEVICE0_PCIE_LINK_RATE_5_0_SUPP (0x02) |
| #define MPI3_DEVICE0_PCIE_LINK_RATE_2_5_SUPP (0x01) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK (0x0007) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NO_DEVICE (0x0000) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE (0x0001) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SWITCH_DEVICE (0x0002) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE (0x0003) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_ASPM_MASK (0x0030) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_ASPM_SHIFT (4) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_PITYPE_MASK (0x00c0) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_PITYPE_SHIFT (6) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_PITYPE_0 (0x0000) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_PITYPE_1 (0x0040) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_PITYPE_2 (0x0080) |
| #define MPI3_DEVICE0_PCIE_DEVICE_INFO_PITYPE_3 (0x00c0) |
| #define MPI3_DEVICE0_PCIE_CAP_SGL_EXTRA_LENGTH_SUPPORTED (0x00000020) |
| #define MPI3_DEVICE0_PCIE_CAP_METADATA_SEPARATED (0x00000010) |
| #define MPI3_DEVICE0_PCIE_CAP_SGL_DWORD_ALIGN_REQUIRED (0x00000008) |
| #define MPI3_DEVICE0_PCIE_CAP_SGL_FORMAT_SGL (0x00000004) |
| #define MPI3_DEVICE0_PCIE_CAP_SGL_FORMAT_PRP (0x00000000) |
| #define MPI3_DEVICE0_PCIE_CAP_BIT_BUCKET_SGL_SUPP (0x00000002) |
| #define MPI3_DEVICE0_PCIE_CAP_SGL_SUPP (0x00000001) |
| #define MPI3_DEVICE0_PCIE_CAP_ASPM_MASK (0x000000c0) |
| #define MPI3_DEVICE0_PCIE_CAP_ASPM_SHIFT (6) |
| #define MPI3_DEVICE0_PCIE_RECOVER_METHOD_MASK (0xe0) |
| #define MPI3_DEVICE0_PCIE_RECOVER_METHOD_NS_MGMT (0x00) |
| #define MPI3_DEVICE0_PCIE_RECOVER_METHOD_FORMAT (0x20) |
| #define MPI3_DEVICE0_PCIE_RECOVER_REASON_MASK (0x1f) |
| #define MPI3_DEVICE0_PCIE_RECOVER_REASON_NO_NS (0x00) |
| #define MPI3_DEVICE0_PCIE_RECOVER_REASON_NO_NSID_1 (0x01) |
| #define MPI3_DEVICE0_PCIE_RECOVER_REASON_TOO_MANY_NS (0x02) |
| #define MPI3_DEVICE0_PCIE_RECOVER_REASON_PROTECTION (0x03) |
| #define MPI3_DEVICE0_PCIE_RECOVER_REASON_METADATA_SZ (0x04) |
| #define MPI3_DEVICE0_PCIE_RECOVER_REASON_LBA_DATA_SZ (0x05) |
| struct mpi3_device0_vd_format { |
| u8 vd_state; |
| u8 raid_level; |
| __le16 device_info; |
| __le16 flags; |
| __le16 io_throttle_group; |
| __le16 io_throttle_group_low; |
| __le16 io_throttle_group_high; |
| __le32 reserved0c; |
| }; |
| #define MPI3_DEVICE0_VD_STATE_OFFLINE (0x00) |
| #define MPI3_DEVICE0_VD_STATE_PARTIALLY_DEGRADED (0x01) |
| #define MPI3_DEVICE0_VD_STATE_DEGRADED (0x02) |
| #define MPI3_DEVICE0_VD_STATE_OPTIMAL (0x03) |
| #define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_0 (0) |
| #define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_1 (1) |
| #define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_5 (5) |
| #define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_6 (6) |
| #define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_10 (10) |
| #define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_50 (50) |
| #define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_60 (60) |
| #define MPI3_DEVICE0_VD_DEVICE_INFO_HDD (0x0010) |
| #define MPI3_DEVICE0_VD_DEVICE_INFO_SSD (0x0008) |
| #define MPI3_DEVICE0_VD_DEVICE_INFO_NVME (0x0004) |
| #define MPI3_DEVICE0_VD_DEVICE_INFO_SATA (0x0002) |
| #define MPI3_DEVICE0_VD_DEVICE_INFO_SAS (0x0001) |
| #define MPI3_DEVICE0_VD_FLAGS_IO_THROTTLE_GROUP_QD_MASK (0xf000) |
| #define MPI3_DEVICE0_VD_FLAGS_IO_THROTTLE_GROUP_QD_SHIFT (12) |
| union mpi3_device0_dev_spec_format { |
| struct mpi3_device0_sas_sata_format sas_sata_format; |
| struct mpi3_device0_pcie_format pcie_format; |
| struct mpi3_device0_vd_format vd_format; |
| }; |
| |
| struct mpi3_device_page0 { |
| struct mpi3_config_page_header header; |
| __le16 dev_handle; |
| __le16 parent_dev_handle; |
| __le16 slot; |
| __le16 enclosure_handle; |
| __le64 wwid; |
| __le16 persistent_id; |
| u8 io_unit_port; |
| u8 access_status; |
| __le16 flags; |
| __le16 reserved1e; |
| __le16 slot_index; |
| __le16 queue_depth; |
| u8 reserved24[3]; |
| u8 device_form; |
| union mpi3_device0_dev_spec_format device_specific; |
| }; |
| |
| #define MPI3_DEVICE0_PAGEVERSION (0x00) |
| #define MPI3_DEVICE0_PARENT_INVALID (0xffff) |
| #define MPI3_DEVICE0_ENCLOSURE_HANDLE_NO_ENCLOSURE (0x0000) |
| #define MPI3_DEVICE0_WWID_INVALID (0xffffffffffffffff) |
| #define MPI3_DEVICE0_PERSISTENTID_INVALID (0xffff) |
| #define MPI3_DEVICE0_IOUNITPORT_INVALID (0xff) |
| #define MPI3_DEVICE0_ASTATUS_NO_ERRORS (0x00) |
| #define MPI3_DEVICE0_ASTATUS_NEEDS_INITIALIZATION (0x01) |
| #define MPI3_DEVICE0_ASTATUS_CAP_UNSUPPORTED (0x02) |
| #define MPI3_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x03) |
| #define MPI3_DEVICE0_ASTATUS_UNAUTHORIZED (0x04) |
| #define MPI3_DEVICE0_ASTATUS_DEVICE_MISSING_DELAY (0x05) |
| #define MPI3_DEVICE0_ASTATUS_PREPARE (0x06) |
| #define MPI3_DEVICE0_ASTATUS_SAFE_MODE (0x07) |
| #define MPI3_DEVICE0_ASTATUS_GENERIC_MAX (0x0f) |
| #define MPI3_DEVICE0_ASTATUS_SAS_UNKNOWN (0x10) |
| #define MPI3_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x11) |
| #define MPI3_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x12) |
| #define MPI3_DEVICE0_ASTATUS_SAS_MAX (0x1f) |
| #define MPI3_DEVICE0_ASTATUS_SIF_UNKNOWN (0x20) |
| #define MPI3_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x21) |
| #define MPI3_DEVICE0_ASTATUS_SIF_DIAG (0x22) |
| #define MPI3_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x23) |
| #define MPI3_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x24) |
| #define MPI3_DEVICE0_ASTATUS_SIF_PIO_SN (0x25) |
| #define MPI3_DEVICE0_ASTATUS_SIF_MDMA_SN (0x26) |
| #define MPI3_DEVICE0_ASTATUS_SIF_UDMA_SN (0x27) |
| #define MPI3_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x28) |
| #define MPI3_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x29) |
| #define MPI3_DEVICE0_ASTATUS_SIF_MAX (0x2f) |
| #define MPI3_DEVICE0_ASTATUS_PCIE_UNKNOWN (0x30) |
| #define MPI3_DEVICE0_ASTATUS_PCIE_MEM_SPACE_ACCESS (0x31) |
| #define MPI3_DEVICE0_ASTATUS_PCIE_UNSUPPORTED (0x32) |
| #define MPI3_DEVICE0_ASTATUS_PCIE_MSIX_REQUIRED (0x33) |
| #define MPI3_DEVICE0_ASTATUS_PCIE_ECRC_REQUIRED (0x34) |
| #define MPI3_DEVICE0_ASTATUS_PCIE_MAX (0x3f) |
| #define MPI3_DEVICE0_ASTATUS_NVME_UNKNOWN (0x40) |
| #define MPI3_DEVICE0_ASTATUS_NVME_READY_TIMEOUT (0x41) |
| #define MPI3_DEVICE0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x42) |
| #define MPI3_DEVICE0_ASTATUS_NVME_IDENTIFY_FAILED (0x43) |
| #define MPI3_DEVICE0_ASTATUS_NVME_QCONFIG_FAILED (0x44) |
| #define MPI3_DEVICE0_ASTATUS_NVME_QCREATION_FAILED (0x45) |
| #define MPI3_DEVICE0_ASTATUS_NVME_EVENTCFG_FAILED (0x46) |
| #define MPI3_DEVICE0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x47) |
| #define MPI3_DEVICE0_ASTATUS_NVME_IDLE_TIMEOUT (0x48) |
| #define MPI3_DEVICE0_ASTATUS_NVME_CTRL_FAILURE_STATUS (0x49) |
| #define MPI3_DEVICE0_ASTATUS_NVME_INSUFFICIENT_POWER (0x4a) |
| #define MPI3_DEVICE0_ASTATUS_NVME_DOORBELL_STRIDE (0x4b) |
| #define MPI3_DEVICE0_ASTATUS_NVME_MEM_PAGE_MIN_SIZE (0x4c) |
| #define MPI3_DEVICE0_ASTATUS_NVME_MEMORY_ALLOCATION (0x4d) |
| #define MPI3_DEVICE0_ASTATUS_NVME_COMPLETION_TIME (0x4e) |
| #define MPI3_DEVICE0_ASTATUS_NVME_BAR (0x4f) |
| #define MPI3_DEVICE0_ASTATUS_NVME_NS_DESCRIPTOR (0x50) |
| #define MPI3_DEVICE0_ASTATUS_NVME_INCOMPATIBLE_SETTINGS (0x51) |
| #define MPI3_DEVICE0_ASTATUS_NVME_TOO_MANY_ERRORS (0x52) |
| #define MPI3_DEVICE0_ASTATUS_NVME_MAX (0x5f) |
| #define MPI3_DEVICE0_ASTATUS_VD_UNKNOWN (0x80) |
| #define MPI3_DEVICE0_ASTATUS_VD_MAX (0x8f) |
| #define MPI3_DEVICE0_FLAGS_CONTROLLER_DEV_HANDLE (0x0080) |
| #define MPI3_DEVICE0_FLAGS_IO_THROTTLING_REQUIRED (0x0010) |
| #define MPI3_DEVICE0_FLAGS_HIDDEN (0x0008) |
| #define MPI3_DEVICE0_FLAGS_ATT_METHOD_VIRTUAL (0x0004) |
| #define MPI3_DEVICE0_FLAGS_ATT_METHOD_DIR_ATTACHED (0x0002) |
| #define MPI3_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) |
| #define MPI3_DEVICE0_QUEUE_DEPTH_NOT_APPLICABLE (0x0000) |
| struct mpi3_device1_sas_sata_format { |
| __le32 reserved00; |
| }; |
| struct mpi3_device1_pcie_format { |
| __le16 vendor_id; |
| __le16 device_id; |
| __le16 subsystem_vendor_id; |
| __le16 subsystem_id; |
| __le32 reserved08; |
| u8 revision_id; |
| u8 reserved0d; |
| __le16 pci_parameters; |
| }; |
| |
| #define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_128B (0x0) |
| #define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_256B (0x1) |
| #define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_512B (0x2) |
| #define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_1024B (0x3) |
| #define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_2048B (0x4) |
| #define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_4096B (0x5) |
| #define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_MASK (0x01c0) |
| #define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_SHIFT (6) |
| #define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_MASK (0x0038) |
| #define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_SHIFT (3) |
| #define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_MASK (0x0007) |
| #define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_SHIFT (0) |
| struct mpi3_device1_vd_format { |
| __le32 reserved00; |
| }; |
| |
| union mpi3_device1_dev_spec_format { |
| struct mpi3_device1_sas_sata_format sas_sata_format; |
| struct mpi3_device1_pcie_format pcie_format; |
| struct mpi3_device1_vd_format vd_format; |
| }; |
| |
| struct mpi3_device_page1 { |
| struct mpi3_config_page_header header; |
| __le16 dev_handle; |
| __le16 reserved0a; |
| __le16 link_change_count; |
| __le16 rate_change_count; |
| __le16 tm_count; |
| __le16 reserved12; |
| __le32 reserved14[10]; |
| u8 reserved3c[3]; |
| u8 device_form; |
| union mpi3_device1_dev_spec_format device_specific; |
| }; |
| |
| #define MPI3_DEVICE1_PAGEVERSION (0x00) |
| #define MPI3_DEVICE1_COUNTER_MAX (0xfffe) |
| #define MPI3_DEVICE1_COUNTER_INVALID (0xffff) |
| #endif |
