| /* |
| * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "armv7-m.dtsi" |
| #include <dt-bindings/clock/stm32fx-clock.h> |
| #include <dt-bindings/mfd/stm32f4-rcc.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| clocks { |
| clk_hse: clk-hse { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| clk_lse: clk-lse { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| clk_lsi: clk-lsi { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32000>; |
| }; |
| |
| clk_i2s_ckin: i2s-ckin { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| soc { |
| romem: efuse@1fff7800 { |
| compatible = "st,stm32f4-otp"; |
| reg = <0x1fff7800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ts_cal1: calib@22c { |
| reg = <0x22c 0x2>; |
| }; |
| ts_cal2: calib@22e { |
| reg = <0x22e 0x2>; |
| }; |
| }; |
| |
| timers2: timers@40000000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000000 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@1 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers3: timers@40000400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000400 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@2 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers4: timers@40000800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000800 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@3 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers5: timers@40000c00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40000C00 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@4 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers6: timers@40001000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40001000 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| timer@5 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <5>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers7: timers@40001400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40001400 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| timer@6 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <6>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers12: timers@40001800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40001800 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@11 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <11>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers13: timers@40001c00 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001C00 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers14: timers@40002000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40002000 0x400>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| rtc: rtc@40002800 { |
| compatible = "st,stm32-rtc"; |
| reg = <0x40002800 0x400>; |
| clocks = <&rcc 1 CLK_RTC>; |
| assigned-clocks = <&rcc 1 CLK_RTC>; |
| assigned-clock-parents = <&rcc 1 CLK_LSE>; |
| interrupt-parent = <&exti>; |
| interrupts = <17 1>; |
| st,syscfg = <&pwrcfg 0x00 0x100>; |
| status = "disabled"; |
| }; |
| |
| iwdg: watchdog@40003000 { |
| compatible = "st,stm32-iwdg"; |
| reg = <0x40003000 0x400>; |
| clocks = <&clk_lsi>; |
| clock-names = "lsi"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@40003800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32f4-spi"; |
| reg = <0x40003800 0x400>; |
| interrupts = <36>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@40003c00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32f4-spi"; |
| reg = <0x40003c00 0x400>; |
| interrupts = <51>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@40004400 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40004400 0x400>; |
| interrupts = <38>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>; |
| status = "disabled"; |
| }; |
| |
| usart3: serial@40004800 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40004800 0x400>; |
| interrupts = <39>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>; |
| status = "disabled"; |
| dmas = <&dma1 1 4 0x400 0x0>, |
| <&dma1 3 4 0x400 0x0>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| usart4: serial@40004c00 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40004c00 0x400>; |
| interrupts = <52>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>; |
| status = "disabled"; |
| }; |
| |
| usart5: serial@40005000 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40005000 0x400>; |
| interrupts = <53>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@40005400 { |
| compatible = "st,stm32f4-i2c"; |
| reg = <0x40005400 0x400>; |
| interrupts = <31>, |
| <32>; |
| resets = <&rcc STM32F4_APB1_RESET(I2C1)>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@40005c00 { |
| compatible = "st,stm32f4-i2c"; |
| reg = <0x40005c00 0x400>; |
| interrupts = <72>, |
| <73>; |
| resets = <&rcc STM32F4_APB1_RESET(I2C3)>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| dac: dac@40007400 { |
| compatible = "st,stm32f4-dac-core"; |
| reg = <0x40007400 0x400>; |
| resets = <&rcc STM32F4_APB1_RESET(DAC)>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>; |
| clock-names = "pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| dac1: dac@1 { |
| compatible = "st,stm32-dac"; |
| #io-channel-cells = <1>; |
| reg = <1>; |
| status = "disabled"; |
| }; |
| |
| dac2: dac@2 { |
| compatible = "st,stm32-dac"; |
| #io-channel-cells = <1>; |
| reg = <2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usart7: serial@40007800 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40007800 0x400>; |
| interrupts = <82>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>; |
| status = "disabled"; |
| }; |
| |
| usart8: serial@40007c00 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40007c00 0x400>; |
| interrupts = <83>; |
| clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>; |
| status = "disabled"; |
| }; |
| |
| timers1: timers@40010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40010000 0x400>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@0 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers8: timers@40010400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40010400 0x400>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@7 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <7>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usart1: serial@40011000 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40011000 0x400>; |
| interrupts = <37>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>; |
| status = "disabled"; |
| dmas = <&dma2 2 4 0x400 0x0>, |
| <&dma2 7 4 0x400 0x0>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| usart6: serial@40011400 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40011400 0x400>; |
| interrupts = <71>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@40012000 { |
| compatible = "st,stm32f4-adc-core"; |
| reg = <0x40012000 0x400>; |
| interrupts = <18>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; |
| clock-names = "adc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| adc1: adc@0 { |
| compatible = "st,stm32f4-adc"; |
| #io-channel-cells = <1>; |
| reg = <0x0>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; |
| interrupt-parent = <&adc>; |
| interrupts = <0>; |
| dmas = <&dma2 0 0 0x400 0x0>; |
| dma-names = "rx"; |
| status = "disabled"; |
| }; |
| |
| adc2: adc@100 { |
| compatible = "st,stm32f4-adc"; |
| #io-channel-cells = <1>; |
| reg = <0x100>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; |
| interrupt-parent = <&adc>; |
| interrupts = <1>; |
| dmas = <&dma2 3 1 0x400 0x0>; |
| dma-names = "rx"; |
| status = "disabled"; |
| }; |
| |
| adc3: adc@200 { |
| compatible = "st,stm32f4-adc"; |
| #io-channel-cells = <1>; |
| reg = <0x200>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; |
| interrupt-parent = <&adc>; |
| interrupts = <2>; |
| dmas = <&dma2 1 2 0x400 0x0>; |
| dma-names = "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| sdio: mmc@40012c00 { |
| compatible = "arm,pl180", "arm,primecell"; |
| arm,primecell-periphid = <0x00880180>; |
| reg = <0x40012c00 0x400>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>; |
| clock-names = "apb_pclk"; |
| interrupts = <49>; |
| max-frequency = <48000000>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@40013000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32f4-spi"; |
| reg = <0x40013000 0x400>; |
| interrupts = <35>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@40013400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32f4-spi"; |
| reg = <0x40013400 0x400>; |
| interrupts = <84>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>; |
| status = "disabled"; |
| }; |
| |
| syscfg: syscon@40013800 { |
| compatible = "st,stm32-syscfg", "syscon"; |
| reg = <0x40013800 0x400>; |
| }; |
| |
| exti: interrupt-controller@40013c00 { |
| compatible = "st,stm32-exti"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x40013C00 0x400>; |
| interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; |
| }; |
| |
| timers9: timers@40014000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32-timers"; |
| reg = <0x40014000 0x400>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@8 { |
| compatible = "st,stm32-timer-trigger"; |
| reg = <8>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers10: timers@40014400 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014400 0x400>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers11: timers@40014800 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014800 0x400>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>; |
| clock-names = "int"; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| spi5: spi@40015000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32f4-spi"; |
| reg = <0x40015000 0x400>; |
| interrupts = <85>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>; |
| dmas = <&dma2 3 2 0x400 0x0>, |
| <&dma2 4 2 0x400 0x0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@40015400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "st,stm32f4-spi"; |
| reg = <0x40015400 0x400>; |
| interrupts = <86>; |
| clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>; |
| status = "disabled"; |
| }; |
| |
| pwrcfg: power-config@40007000 { |
| compatible = "st,stm32-power-config", "syscon"; |
| reg = <0x40007000 0x400>; |
| }; |
| |
| ltdc: display-controller@40016800 { |
| compatible = "st,stm32-ltdc"; |
| reg = <0x40016800 0x200>; |
| interrupts = <88>, <89>; |
| resets = <&rcc STM32F4_APB2_RESET(LTDC)>; |
| clocks = <&rcc 1 CLK_LCD>; |
| clock-names = "lcd"; |
| status = "disabled"; |
| }; |
| |
| crc: crc@40023000 { |
| compatible = "st,stm32f4-crc"; |
| reg = <0x40023000 0x400>; |
| clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>; |
| status = "disabled"; |
| }; |
| |
| rcc: rcc@40023800 { |
| #reset-cells = <1>; |
| #clock-cells = <2>; |
| compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; |
| reg = <0x40023800 0x400>; |
| clocks = <&clk_hse>, <&clk_i2s_ckin>; |
| st,syscfg = <&pwrcfg>; |
| assigned-clocks = <&rcc 1 CLK_HSE_RTC>; |
| assigned-clock-rates = <1000000>; |
| }; |
| |
| dma1: dma-controller@40026000 { |
| compatible = "st,stm32-dma"; |
| reg = <0x40026000 0x400>; |
| interrupts = <11>, |
| <12>, |
| <13>, |
| <14>, |
| <15>, |
| <16>, |
| <17>, |
| <47>; |
| clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>; |
| #dma-cells = <4>; |
| }; |
| |
| dma2: dma-controller@40026400 { |
| compatible = "st,stm32-dma"; |
| reg = <0x40026400 0x400>; |
| interrupts = <56>, |
| <57>, |
| <58>, |
| <59>, |
| <60>, |
| <68>, |
| <69>, |
| <70>; |
| clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>; |
| #dma-cells = <4>; |
| st,mem2mem; |
| }; |
| |
| mac: ethernet@40028000 { |
| compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; |
| reg = <0x40028000 0x8000>; |
| reg-names = "stmmaceth"; |
| interrupts = <61>; |
| interrupt-names = "macirq"; |
| clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; |
| clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>, |
| <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>, |
| <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>; |
| st,syscon = <&syscfg 0x4>; |
| snps,pbl = <8>; |
| snps,mixed-burst; |
| status = "disabled"; |
| }; |
| |
| dma2d: dma2d@4002b000 { |
| compatible = "st,stm32-dma2d"; |
| reg = <0x4002b000 0xc00>; |
| interrupts = <90>; |
| resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>; |
| clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>; |
| clock-names = "dma2d"; |
| status = "disabled"; |
| }; |
| |
| usbotg_hs: usb@40040000 { |
| compatible = "snps,dwc2"; |
| reg = <0x40040000 0x40000>; |
| interrupts = <77>; |
| clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>; |
| clock-names = "otg"; |
| status = "disabled"; |
| }; |
| |
| usbotg_fs: usb@50000000 { |
| compatible = "st,stm32f4x9-fsotg"; |
| reg = <0x50000000 0x40000>; |
| interrupts = <67>; |
| clocks = <&rcc 0 39>; |
| clock-names = "otg"; |
| status = "disabled"; |
| }; |
| |
| dcmi: dcmi@50050000 { |
| compatible = "st,stm32-dcmi"; |
| reg = <0x50050000 0x400>; |
| interrupts = <78>; |
| resets = <&rcc STM32F4_AHB2_RESET(DCMI)>; |
| clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>; |
| clock-names = "mclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dcmi_pins>; |
| dmas = <&dma2 1 1 0x414 0x3>; |
| dma-names = "tx"; |
| status = "disabled"; |
| }; |
| |
| rng: rng@50060800 { |
| compatible = "st,stm32-rng"; |
| reg = <0x50060800 0x400>; |
| clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; |
| |
| }; |
| }; |
| }; |
| |
| &systick { |
| clocks = <&rcc 1 SYSTICK>; |
| status = "okay"; |
| }; |
