arch/arm/boot/dts/imx7d-flex-concentrator.dts - third_party/kernel - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for Kamstrup OMNIA Flex Concentrator.
  *
  * Copyright (C) 2020 Kamstrup A/S
  * Author: Bruno Thomsen <bruno.thomsen@gmail.com>
  */

 /dts-v1/;

 #include "imx7d-tqma7.dtsi"

 /* One I2C device on TQMa7 SoM is not mounted */
 /delete-node/ &ds1339;

 / {
 	model = "Kamstrup OMNIA Flex Concentrator";
 	compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d";

 	memory@80000000 {
 		device_type = "memory";
 		/* 1024 MB - TQMa7D board configuration */
 		reg = <0x80000000 0x40000000>;
 	};

 	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS_USBOTG2";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};

 	reg_vref_1v8: regulator-vref-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC1V8_REF";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 		vin-supply = <&sw2_reg>;
 	};

 	/*
 	 * Human Machine Interface consists of 4 dual red/green LEDs.
 	 * hmi-a:green is controlled directly by the switch-mode power supply.
 	 * hmi-a:red is not used.
 	 */
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;

 		led-0 {
 			label = "hmi-b:red:heartbeat-degraded";
 			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
 		};

 		led-1 {
 			label = "hmi-b:green:heartbeat-running";
 			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};

 		led-2 {
 			label = "hmi-c:red:mesh-error";
 			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
 		};

 		led-3 {
 			label = "hmi-c:green:mesh-activity";
 			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
 		};

 		led-4 {
 			label = "hmi-d:red:omnia-error";
 			gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
 		};

 		led-5 {
 			label = "hmi-d:green:omnia-activity";
 			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 		};
 	};

 	/*
 	 * Errata e10574 board restart workaround.
 	 */
 	gpio-restart {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_restart>;
 		compatible = "gpio-restart";
 		gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 		priority = <200>;
 	};
 };

 /*
  * Analog signals
  * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806)
  */
 &adc1 {
 	vref-supply = <&reg_vref_1v8>;
 	status = "okay";
 };

 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	num-chipselects = <1>;
 	cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
 	status = "okay";

 	pcf2127: rtc@0 {
 		compatible = "nxp,pcf2127";
 		reg = <0>;
 		spi-max-frequency = <2000000>;
 		reset-source;
 	};
 };

 &ecspi4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	num-chipselects = <1>;
 	cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
 	status = "okay";

 	/*
 	 * ST chip maximum SPI clock frequency is 33 MHz.
 	 *
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
 	st33htph: tpm-tis@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
 	};
 };

 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy>;
 	status = "okay";

 	/*
 	 * MDIO bus reset is used to generate PHY device reset before
 	 * Ethernet PHY type ID auto-detection. Otherwise this communication
 	 * fails as device does not answer when recommended reset circuit
 	 * is used.
 	 */
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		reset-delay-us = <100000>;
 		reset-post-delay-us = <500000>;
 		reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;

 		/* Microchip/Micrel KSZ8081RNB */
 		ethphy: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio1>;
 			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 			reg = <1>;
 		};
 	};
 };

 /*
  * Detection signals for internal USB modules.
  * Used for robust USB plug and play handling such as USB downstream port
  * power-cycle and USB hub reset in case of misbehaving or crashed modules.
  *
  * SMPS - AC input monitor based on zero crossing.
  * Used for last gasp notification.
  */
 &gpio3 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 	"", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "",
 	"", "", "", "", "", "", "", "",
 	"", "module-b-detection", "", "module-a-detection", "", "", "", "";
 };

 /*
  * Tamper IRQ trigger timestamp reading.
  * Used for sealed cover opened/closed notification.
  */
 &gpio5 {
 	gpio-line-names = "", "", "", "", "", "", "", "",
 	"", "", "", "", "rtc-tamper-irq", "", "", "",
 	"", "", "", "", "", "", "", "",
 	"", "", "", "", "", "", "", "";
 };

 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_misc>;

 	pinctrl_ecspi2: ecspi2grp {
 		fsl,pins = <
 			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c /* X2-15 */
 			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74 /* X2-18 */
 			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74 /* X2-13 */
 			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23			0x74 /* X2-20 */
 			/* RTC - Tamper IRQ */
 			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x3c /* X1-92 */
 		>;
 	};

 	pinctrl_ecspi4: ecspi4grp {
 		fsl,pins = <
 			MX7D_PAD_LCD_CLK__ECSPI4_MISO			0x7c /* X2-72 */
 			MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI		0x74 /* X2-68 */
 			MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK			0x74 /* X2-76 */
 			MX7D_PAD_LCD_VSYNC__GPIO3_IO3			0x74 /* X2-78 */
 		>;
 	};

 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x03 /* X2-48 */
 			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x03 /* X2-46 */
 			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71 /* X2-53 */
 			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71 /* X2-55 */
 			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71 /* X2-61 */
 			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79 /* X2-56 */
 			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79 /* X2-58 */
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79 /* X2-64 */
 			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73 /* X2-52 */
 			/* PHY reset: SRE_FAST, DSE_X1 */
 			MX7D_PAD_ENET1_COL__GPIO7_IO15			0x00 /* X1-96 */
 			/* Clock from PHY to MAC: 100kPU */
 			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x70 /* X3-4 */
 			/* PHY interrupt: 100kPU, HYS */
 			MX7D_PAD_GPIO1_IO09__GPIO1_IO9			0x78 /* X1-80 */
 		>;
 	};

 	pinctrl_leds: ledsgrp {
 		fsl,pins = <
 			MX7D_PAD_LCD_DATA01__GPIO3_IO6			0x14 /* X2-82 */
 			MX7D_PAD_EPDC_BDR0__GPIO2_IO28			0x14 /* X1-82 */
 			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x14 /* X1-84 */
 			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x14 /* X1-86 */
 			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31		0x14 /* X1-88 */
 			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3		0x14 /* X1-90 */
 		>;
 	};

 	pinctrl_misc: miscgrp {
 		fsl,pins = <
 			/* Module A detection (low = present) */
 			MX7D_PAD_LCD_DATA22__GPIO3_IO27			0x7c /* X2-105 */
 			/* Module B detection (low = present) */
 			MX7D_PAD_LCD_DATA20__GPIO3_IO25			0x7c /* X2-103 */
 			/* SMPS - AC input monitor (high = failure) */
 			MX7D_PAD_LCD_DATA07__GPIO3_IO12			0x7c /* X2-88 */
 			/* USB - Hub reset */
 			MX7D_PAD_LCD_DATA09__GPIO3_IO14			0x74 /* X2-92 */
 		>;
 	};

 	pinctrl_restart: restartgrp {
 		fsl,pins = <
 			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x74 /* X1-94 */
 		>;
 	};

 	pinctrl_uart4: uart4grp {
 		fsl,pins = <
 			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e /* X3-14 */
 			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76 /* X3-16 */
 		>;
 	};
 };

 &iomuxc_lpsr {
 	pinctrl_usbotg2: usbotg2grp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c /* X3-11 */
 			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59 /* X3-9 */
 		>;
 	};

 };

 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
 	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
 };

 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	srp-disable;
 	hnp-disable;
 	adp-disable;
 	over-current-active-low;
 	dr_mode = "host";
 	status = "okay";
 };

 /*
  * External watchdog feature provided by pcf2127.
  */
 &wdog1 {
 	status = "disabled";
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Device Tree Source for Kamstrup OMNIA Flex Concentrator.
	*
	* Copyright (C) 2020 Kamstrup A/S
	* Author: Bruno Thomsen <bruno.thomsen@gmail.com>
	*/

	/dts-v1/;

	#include "imx7d-tqma7.dtsi"

	/* One I2C device on TQMa7 SoM is not mounted */
	/delete-node/ &ds1339;

	/ {
	model = "Kamstrup OMNIA Flex Concentrator";
	compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d";

	memory@80000000 {
	device_type = "memory";
	/* 1024 MB - TQMa7D board configuration */
	reg = <0x80000000 0x40000000>;
	};

	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
	compatible = "regulator-fixed";
	regulator-name = "VBUS_USBOTG2";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};

	reg_vref_1v8: regulator-vref-1v8 {
	compatible = "regulator-fixed";
	regulator-name = "VCC1V8_REF";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	vin-supply = <&sw2_reg>;
	};

	/*
	* Human Machine Interface consists of 4 dual red/green LEDs.
	* hmi-a:green is controlled directly by the switch-mode power supply.
	* hmi-a:red is not used.
	*/
	gpio-leds {
	compatible = "gpio-leds";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_leds>;

	led-0 {
	label = "hmi-b:red:heartbeat-degraded";
	gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
	};

	led-1 {
	label = "hmi-b:green:heartbeat-running";
	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
	linux,default-trigger = "heartbeat";
	};

	led-2 {
	label = "hmi-c:red:mesh-error";
	gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
	};

	led-3 {
	label = "hmi-c:green:mesh-activity";
	gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
	};

	led-4 {
	label = "hmi-d:red:omnia-error";
	gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
	};

	led-5 {
	label = "hmi-d:green:omnia-activity";
	gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
	};
	};

	/*
	* Errata e10574 board restart workaround.
	*/
	gpio-restart {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_restart>;
	compatible = "gpio-restart";
	gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
	priority = <200>;
	};
	};

	/*
	* Analog signals
	* ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806)
	*/
	&adc1 {
	vref-supply = <&reg_vref_1v8>;
	status = "okay";
	};

	&ecspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	num-chipselects = <1>;
	cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
	status = "okay";

	pcf2127: rtc@0 {
	compatible = "nxp,pcf2127";
	reg = <0>;
	spi-max-frequency = <2000000>;
	reset-source;
	};
	};

	&ecspi4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi4>;
	num-chipselects = <1>;
	cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
	status = "okay";

	/*
	* ST chip maximum SPI clock frequency is 33 MHz.
	*
	* TCG specification - Section 6.4.1 Clocking:
	* TPM shall support a SPI clock frequency range of 10-24 MHz.
	*/
	st33htph: tpm-tis@0 {
	compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
	reg = <0>;
	spi-max-frequency = <24000000>;
	};
	};

	&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1>;
	phy-mode = "rmii";
	phy-handle = <&ethphy>;
	status = "okay";

	/*
	* MDIO bus reset is used to generate PHY device reset before
	* Ethernet PHY type ID auto-detection. Otherwise this communication
	* fails as device does not answer when recommended reset circuit
	* is used.
	*/
	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	reset-delay-us = <100000>;
	reset-post-delay-us = <500000>;
	reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;

	/* Microchip/Micrel KSZ8081RNB */
	ethphy: ethernet-phy@1 {
	compatible = "ethernet-phy-ieee802.3-c22";
	interrupt-parent = <&gpio1>;
	interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
	reg = <1>;
	};
	};
	};

	/*
	* Detection signals for internal USB modules.
	* Used for robust USB plug and play handling such as USB downstream port
	* power-cycle and USB hub reset in case of misbehaving or crashed modules.
	*
	* SMPS - AC input monitor based on zero crossing.
	* Used for last gasp notification.
	*/
	&gpio3 {
	gpio-line-names = "", "", "", "", "", "", "", "",
	"", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "",
	"", "", "", "", "", "", "", "",
	"", "module-b-detection", "", "module-a-detection", "", "", "", "";
	};

	/*
	* Tamper IRQ trigger timestamp reading.
	* Used for sealed cover opened/closed notification.
	*/
	&gpio5 {
	gpio-line-names = "", "", "", "", "", "", "", "",
	"", "", "", "", "rtc-tamper-irq", "", "", "",
	"", "", "", "", "", "", "", "",
	"", "", "", "", "", "", "", "";
	};

	&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_misc>;

	pinctrl_ecspi2: ecspi2grp {
	fsl,pins = <
	MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c /* X2-15 */
	MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 /* X2-18 */
	MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 /* X2-13 */
	MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* X2-20 */
	/* RTC - Tamper IRQ */
	MX7D_PAD_SD2_CLK__GPIO5_IO12 0x3c /* X1-92 */
	>;
	};

	pinctrl_ecspi4: ecspi4grp {
	fsl,pins = <
	MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x7c /* X2-72 */
	MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x74 /* X2-68 */
	MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x74 /* X2-76 */
	MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x74 /* X2-78 */
	>;
	};

	pinctrl_enet1: enet1grp {
	fsl,pins = <
	MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x03 /* X2-48 */
	MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x03 /* X2-46 */
	MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 /* X2-53 */
	MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 /* X2-55 */
	MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 /* X2-61 */
	MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 /* X2-56 */
	MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 /* X2-58 */
	MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 /* X2-64 */
	MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 /* X2-52 */
	/* PHY reset: SRE_FAST, DSE_X1 */
	MX7D_PAD_ENET1_COL__GPIO7_IO15 0x00 /* X1-96 */
	/* Clock from PHY to MAC: 100kPU */
	MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x70 /* X3-4 */
	/* PHY interrupt: 100kPU, HYS */
	MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x78 /* X1-80 */
	>;
	};

	pinctrl_leds: ledsgrp {
	fsl,pins = <
	MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x14 /* X2-82 */
	MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* X1-82 */
	MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* X1-84 */
	MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* X1-86 */
	MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* X1-88 */
	MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x14 /* X1-90 */
	>;
	};

	pinctrl_misc: miscgrp {
	fsl,pins = <
	/* Module A detection (low = present) */
	MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x7c /* X2-105 */
	/* Module B detection (low = present) */
	MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x7c /* X2-103 */
	/* SMPS - AC input monitor (high = failure) */
	MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x7c /* X2-88 */
	/* USB - Hub reset */
	MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x74 /* X2-92 */
	>;
	};

	pinctrl_restart: restartgrp {
	fsl,pins = <
	MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x74 /* X1-94 */
	>;
	};

	pinctrl_uart4: uart4grp {
	fsl,pins = <
	MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e /* X3-14 */
	MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 /* X3-16 */
	>;
	};
	};

	&iomuxc_lpsr {
	pinctrl_usbotg2: usbotg2grp {
	fsl,pins = <
	MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c /* X3-11 */
	MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 /* X3-9 */
	>;
	};

	};

	&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
	};

	&usbotg2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg2>;
	vbus-supply = <&reg_usb_otg2_vbus>;
	srp-disable;
	hnp-disable;
	adp-disable;
	over-current-active-low;
	dr_mode = "host";
	status = "okay";
	};

	/*
	* External watchdog feature provided by pcf2127.
	*/
	&wdog1 {
	status = "disabled";
	};