| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright 2019 NXP | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/devfreq.h> | |
| #include <linux/device.h> | |
| #include <linux/module.h> | |
| #include <linux/of_device.h> | |
| #include <linux/pm_opp.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| struct imx_bus { | |
| struct devfreq_dev_profile profile; | |
| struct devfreq *devfreq; | |
| struct clk *clk; | |
| struct platform_device *icc_pdev; | |
| }; | |
| static int imx_bus_target(struct device *dev, | |
| unsigned long *freq, u32 flags) | |
| { | |
| struct dev_pm_opp *new_opp; | |
| int ret; | |
| new_opp = devfreq_recommended_opp(dev, freq, flags); | |
| if (IS_ERR(new_opp)) { | |
| ret = PTR_ERR(new_opp); | |
| dev_err(dev, "failed to get recommended opp: %d\n", ret); | |
| return ret; | |
| } | |
| dev_pm_opp_put(new_opp); | |
| return dev_pm_opp_set_rate(dev, *freq); | |
| } | |
| static int imx_bus_get_cur_freq(struct device *dev, unsigned long *freq) | |
| { | |
| struct imx_bus *priv = dev_get_drvdata(dev); | |
| *freq = clk_get_rate(priv->clk); | |
| return 0; | |
| } | |
| static void imx_bus_exit(struct device *dev) | |
| { | |
| struct imx_bus *priv = dev_get_drvdata(dev); | |
| dev_pm_opp_of_remove_table(dev); | |
| platform_device_unregister(priv->icc_pdev); | |
| } | |
| /* imx_bus_init_icc() - register matching icc provider if required */ | |
| static int imx_bus_init_icc(struct device *dev) | |
| { | |
| struct imx_bus *priv = dev_get_drvdata(dev); | |
| const char *icc_driver_name; | |
| if (!of_get_property(dev->of_node, "#interconnect-cells", NULL)) | |
| return 0; | |
| if (!IS_ENABLED(CONFIG_INTERCONNECT_IMX)) { | |
| dev_warn(dev, "imx interconnect drivers disabled\n"); | |
| return 0; | |
| } | |
| icc_driver_name = of_device_get_match_data(dev); | |
| if (!icc_driver_name) { | |
| dev_err(dev, "unknown interconnect driver\n"); | |
| return 0; | |
| } | |
| priv->icc_pdev = platform_device_register_data( | |
| dev, icc_driver_name, -1, NULL, 0); | |
| if (IS_ERR(priv->icc_pdev)) { | |
| dev_err(dev, "failed to register icc provider %s: %ld\n", | |
| icc_driver_name, PTR_ERR(priv->icc_pdev)); | |
| return PTR_ERR(priv->icc_pdev); | |
| } | |
| return 0; | |
| } | |
| static int imx_bus_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct imx_bus *priv; | |
| const char *gov = DEVFREQ_GOV_USERSPACE; | |
| int ret; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| /* | |
| * Fetch the clock to adjust but don't explicitly enable. | |
| * | |
| * For imx bus clock clk_set_rate is safe no matter if the clock is on | |
| * or off and some peripheral side-buses might be off unless enabled by | |
| * drivers for devices on those specific buses. | |
| * | |
| * Rate adjustment on a disabled bus clock just takes effect later. | |
| */ | |
| priv->clk = devm_clk_get(dev, NULL); | |
| if (IS_ERR(priv->clk)) { | |
| ret = PTR_ERR(priv->clk); | |
| dev_err(dev, "failed to fetch clk: %d\n", ret); | |
| return ret; | |
| } | |
| platform_set_drvdata(pdev, priv); | |
| ret = dev_pm_opp_of_add_table(dev); | |
| if (ret < 0) { | |
| dev_err(dev, "failed to get OPP table\n"); | |
| return ret; | |
| } | |
| priv->profile.target = imx_bus_target; | |
| priv->profile.exit = imx_bus_exit; | |
| priv->profile.get_cur_freq = imx_bus_get_cur_freq; | |
| priv->profile.initial_freq = clk_get_rate(priv->clk); | |
| priv->devfreq = devm_devfreq_add_device(dev, &priv->profile, | |
| gov, NULL); | |
| if (IS_ERR(priv->devfreq)) { | |
| ret = PTR_ERR(priv->devfreq); | |
| dev_err(dev, "failed to add devfreq device: %d\n", ret); | |
| goto err; | |
| } | |
| ret = imx_bus_init_icc(dev); | |
| if (ret) | |
| goto err; | |
| return 0; | |
| err: | |
| dev_pm_opp_of_remove_table(dev); | |
| return ret; | |
| } | |
| static const struct of_device_id imx_bus_of_match[] = { | |
| { .compatible = "fsl,imx8mq-noc", .data = "imx8mq-interconnect", }, | |
| { .compatible = "fsl,imx8mm-noc", .data = "imx8mm-interconnect", }, | |
| { .compatible = "fsl,imx8mn-noc", .data = "imx8mn-interconnect", }, | |
| { .compatible = "fsl,imx8mp-noc", .data = "imx8mp-interconnect", }, | |
| { .compatible = "fsl,imx8m-noc", }, | |
| { .compatible = "fsl,imx8m-nic", }, | |
| { /* sentinel */ }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, imx_bus_of_match); | |
| static struct platform_driver imx_bus_platdrv = { | |
| .probe = imx_bus_probe, | |
| .driver = { | |
| .name = "imx-bus-devfreq", | |
| .of_match_table = imx_bus_of_match, | |
| }, | |
| }; | |
| module_platform_driver(imx_bus_platdrv); | |
| MODULE_DESCRIPTION("Generic i.MX bus frequency scaling driver"); | |
| MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>"); | |
| MODULE_LICENSE("GPL v2"); |