| /* SPDX-License-Identifier: GPL-2.0-only */ | |
| /* | |
| * Universal power supply monitor class | |
| * | |
| * Copyright © 2007 Anton Vorontsov <cbou@mail.ru> | |
| * Copyright © 2004 Szabolcs Gyurko | |
| * Copyright © 2003 Ian Molton <spyro@f2s.com> | |
| * | |
| * Modified: 2004, Oct Szabolcs Gyurko | |
| */ | |
| #ifndef __LINUX_POWER_SUPPLY_H__ | |
| #define __LINUX_POWER_SUPPLY_H__ | |
| #include <linux/device.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/leds.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/notifier.h> | |
| /* | |
| * All voltages, currents, charges, energies, time and temperatures in uV, | |
| * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise | |
| * stated. It's driver's job to convert its raw values to units in which | |
| * this class operates. | |
| */ | |
| /* | |
| * For systems where the charger determines the maximum battery capacity | |
| * the min and max fields should be used to present these values to user | |
| * space. Unused/unknown fields will not appear in sysfs. | |
| */ | |
| enum { | |
| POWER_SUPPLY_STATUS_UNKNOWN = 0, | |
| POWER_SUPPLY_STATUS_CHARGING, | |
| POWER_SUPPLY_STATUS_DISCHARGING, | |
| POWER_SUPPLY_STATUS_NOT_CHARGING, | |
| POWER_SUPPLY_STATUS_FULL, | |
| }; | |
| /* What algorithm is the charger using? */ | |
| enum { | |
| POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0, | |
| POWER_SUPPLY_CHARGE_TYPE_NONE, | |
| POWER_SUPPLY_CHARGE_TYPE_TRICKLE, /* slow speed */ | |
| POWER_SUPPLY_CHARGE_TYPE_FAST, /* fast speed */ | |
| POWER_SUPPLY_CHARGE_TYPE_STANDARD, /* normal speed */ | |
| POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE, /* dynamically adjusted speed */ | |
| POWER_SUPPLY_CHARGE_TYPE_CUSTOM, /* use CHARGE_CONTROL_* props */ | |
| POWER_SUPPLY_CHARGE_TYPE_LONGLIFE, /* slow speed, longer life */ | |
| }; | |
| enum { | |
| POWER_SUPPLY_HEALTH_UNKNOWN = 0, | |
| POWER_SUPPLY_HEALTH_GOOD, | |
| POWER_SUPPLY_HEALTH_OVERHEAT, | |
| POWER_SUPPLY_HEALTH_DEAD, | |
| POWER_SUPPLY_HEALTH_OVERVOLTAGE, | |
| POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, | |
| POWER_SUPPLY_HEALTH_COLD, | |
| POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE, | |
| POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE, | |
| POWER_SUPPLY_HEALTH_OVERCURRENT, | |
| POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED, | |
| POWER_SUPPLY_HEALTH_WARM, | |
| POWER_SUPPLY_HEALTH_COOL, | |
| POWER_SUPPLY_HEALTH_HOT, | |
| }; | |
| enum { | |
| POWER_SUPPLY_TECHNOLOGY_UNKNOWN = 0, | |
| POWER_SUPPLY_TECHNOLOGY_NiMH, | |
| POWER_SUPPLY_TECHNOLOGY_LION, | |
| POWER_SUPPLY_TECHNOLOGY_LIPO, | |
| POWER_SUPPLY_TECHNOLOGY_LiFe, | |
| POWER_SUPPLY_TECHNOLOGY_NiCd, | |
| POWER_SUPPLY_TECHNOLOGY_LiMn, | |
| }; | |
| enum { | |
| POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, | |
| POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, | |
| POWER_SUPPLY_CAPACITY_LEVEL_LOW, | |
| POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, | |
| POWER_SUPPLY_CAPACITY_LEVEL_HIGH, | |
| POWER_SUPPLY_CAPACITY_LEVEL_FULL, | |
| }; | |
| enum { | |
| POWER_SUPPLY_SCOPE_UNKNOWN = 0, | |
| POWER_SUPPLY_SCOPE_SYSTEM, | |
| POWER_SUPPLY_SCOPE_DEVICE, | |
| }; | |
| enum power_supply_property { | |
| /* Properties of type `int' */ | |
| POWER_SUPPLY_PROP_STATUS = 0, | |
| POWER_SUPPLY_PROP_CHARGE_TYPE, | |
| POWER_SUPPLY_PROP_HEALTH, | |
| POWER_SUPPLY_PROP_PRESENT, | |
| POWER_SUPPLY_PROP_ONLINE, | |
| POWER_SUPPLY_PROP_AUTHENTIC, | |
| POWER_SUPPLY_PROP_TECHNOLOGY, | |
| POWER_SUPPLY_PROP_CYCLE_COUNT, | |
| POWER_SUPPLY_PROP_VOLTAGE_MAX, | |
| POWER_SUPPLY_PROP_VOLTAGE_MIN, | |
| POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, | |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
| POWER_SUPPLY_PROP_VOLTAGE_AVG, | |
| POWER_SUPPLY_PROP_VOLTAGE_OCV, | |
| POWER_SUPPLY_PROP_VOLTAGE_BOOT, | |
| POWER_SUPPLY_PROP_CURRENT_MAX, | |
| POWER_SUPPLY_PROP_CURRENT_NOW, | |
| POWER_SUPPLY_PROP_CURRENT_AVG, | |
| POWER_SUPPLY_PROP_CURRENT_BOOT, | |
| POWER_SUPPLY_PROP_POWER_NOW, | |
| POWER_SUPPLY_PROP_POWER_AVG, | |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | |
| POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, | |
| POWER_SUPPLY_PROP_CHARGE_FULL, | |
| POWER_SUPPLY_PROP_CHARGE_EMPTY, | |
| POWER_SUPPLY_PROP_CHARGE_NOW, | |
| POWER_SUPPLY_PROP_CHARGE_AVG, | |
| POWER_SUPPLY_PROP_CHARGE_COUNTER, | |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, | |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, | |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, | |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, | |
| POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, | |
| POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, | |
| POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD, /* in percents! */ | |
| POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD, /* in percents! */ | |
| POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, | |
| POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT, | |
| POWER_SUPPLY_PROP_INPUT_POWER_LIMIT, | |
| POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, | |
| POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, | |
| POWER_SUPPLY_PROP_ENERGY_FULL, | |
| POWER_SUPPLY_PROP_ENERGY_EMPTY, | |
| POWER_SUPPLY_PROP_ENERGY_NOW, | |
| POWER_SUPPLY_PROP_ENERGY_AVG, | |
| POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ | |
| POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, /* in percents! */ | |
| POWER_SUPPLY_PROP_CAPACITY_ALERT_MAX, /* in percents! */ | |
| POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, /* in percents! */ | |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, | |
| POWER_SUPPLY_PROP_TEMP, | |
| POWER_SUPPLY_PROP_TEMP_MAX, | |
| POWER_SUPPLY_PROP_TEMP_MIN, | |
| POWER_SUPPLY_PROP_TEMP_ALERT_MIN, | |
| POWER_SUPPLY_PROP_TEMP_ALERT_MAX, | |
| POWER_SUPPLY_PROP_TEMP_AMBIENT, | |
| POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN, | |
| POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX, | |
| POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, | |
| POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, | |
| POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, | |
| POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, | |
| POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */ | |
| POWER_SUPPLY_PROP_USB_TYPE, | |
| POWER_SUPPLY_PROP_SCOPE, | |
| POWER_SUPPLY_PROP_PRECHARGE_CURRENT, | |
| POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, | |
| POWER_SUPPLY_PROP_CALIBRATE, | |
| POWER_SUPPLY_PROP_MANUFACTURE_YEAR, | |
| POWER_SUPPLY_PROP_MANUFACTURE_MONTH, | |
| POWER_SUPPLY_PROP_MANUFACTURE_DAY, | |
| /* Properties of type `const char *' */ | |
| POWER_SUPPLY_PROP_MODEL_NAME, | |
| POWER_SUPPLY_PROP_MANUFACTURER, | |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, | |
| }; | |
| enum power_supply_type { | |
| POWER_SUPPLY_TYPE_UNKNOWN = 0, | |
| POWER_SUPPLY_TYPE_BATTERY, | |
| POWER_SUPPLY_TYPE_UPS, | |
| POWER_SUPPLY_TYPE_MAINS, | |
| POWER_SUPPLY_TYPE_USB, /* Standard Downstream Port */ | |
| POWER_SUPPLY_TYPE_USB_DCP, /* Dedicated Charging Port */ | |
| POWER_SUPPLY_TYPE_USB_CDP, /* Charging Downstream Port */ | |
| POWER_SUPPLY_TYPE_USB_ACA, /* Accessory Charger Adapters */ | |
| POWER_SUPPLY_TYPE_USB_TYPE_C, /* Type C Port */ | |
| POWER_SUPPLY_TYPE_USB_PD, /* Power Delivery Port */ | |
| POWER_SUPPLY_TYPE_USB_PD_DRP, /* PD Dual Role Port */ | |
| POWER_SUPPLY_TYPE_APPLE_BRICK_ID, /* Apple Charging Method */ | |
| POWER_SUPPLY_TYPE_WIRELESS, /* Wireless */ | |
| }; | |
| enum power_supply_usb_type { | |
| POWER_SUPPLY_USB_TYPE_UNKNOWN = 0, | |
| POWER_SUPPLY_USB_TYPE_SDP, /* Standard Downstream Port */ | |
| POWER_SUPPLY_USB_TYPE_DCP, /* Dedicated Charging Port */ | |
| POWER_SUPPLY_USB_TYPE_CDP, /* Charging Downstream Port */ | |
| POWER_SUPPLY_USB_TYPE_ACA, /* Accessory Charger Adapters */ | |
| POWER_SUPPLY_USB_TYPE_C, /* Type C Port */ | |
| POWER_SUPPLY_USB_TYPE_PD, /* Power Delivery Port */ | |
| POWER_SUPPLY_USB_TYPE_PD_DRP, /* PD Dual Role Port */ | |
| POWER_SUPPLY_USB_TYPE_PD_PPS, /* PD Programmable Power Supply */ | |
| POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID, /* Apple Charging Method */ | |
| }; | |
| enum power_supply_notifier_events { | |
| PSY_EVENT_PROP_CHANGED, | |
| }; | |
| union power_supply_propval { | |
| int intval; | |
| const char *strval; | |
| }; | |
| struct device_node; | |
| struct power_supply; | |
| /* Run-time specific power supply configuration */ | |
| struct power_supply_config { | |
| struct device_node *of_node; | |
| struct fwnode_handle *fwnode; | |
| /* Driver private data */ | |
| void *drv_data; | |
| /* Device specific sysfs attributes */ | |
| const struct attribute_group **attr_grp; | |
| char **supplied_to; | |
| size_t num_supplicants; | |
| }; | |
| /* Description of power supply */ | |
| struct power_supply_desc { | |
| const char *name; | |
| enum power_supply_type type; | |
| const enum power_supply_usb_type *usb_types; | |
| size_t num_usb_types; | |
| const enum power_supply_property *properties; | |
| size_t num_properties; | |
| /* | |
| * Functions for drivers implementing power supply class. | |
| * These shouldn't be called directly by other drivers for accessing | |
| * this power supply. Instead use power_supply_*() functions (for | |
| * example power_supply_get_property()). | |
| */ | |
| int (*get_property)(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| union power_supply_propval *val); | |
| int (*set_property)(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| const union power_supply_propval *val); | |
| /* | |
| * property_is_writeable() will be called during registration | |
| * of power supply. If this happens during device probe then it must | |
| * not access internal data of device (because probe did not end). | |
| */ | |
| int (*property_is_writeable)(struct power_supply *psy, | |
| enum power_supply_property psp); | |
| void (*external_power_changed)(struct power_supply *psy); | |
| void (*set_charged)(struct power_supply *psy); | |
| /* | |
| * Set if thermal zone should not be created for this power supply. | |
| * For example for virtual supplies forwarding calls to actual | |
| * sensors or other supplies. | |
| */ | |
| bool no_thermal; | |
| /* For APM emulation, think legacy userspace. */ | |
| int use_for_apm; | |
| }; | |
| struct power_supply { | |
| const struct power_supply_desc *desc; | |
| char **supplied_to; | |
| size_t num_supplicants; | |
| char **supplied_from; | |
| size_t num_supplies; | |
| struct device_node *of_node; | |
| /* Driver private data */ | |
| void *drv_data; | |
| /* private */ | |
| struct device dev; | |
| struct work_struct changed_work; | |
| struct delayed_work deferred_register_work; | |
| spinlock_t changed_lock; | |
| bool changed; | |
| bool initialized; | |
| bool removing; | |
| atomic_t use_cnt; | |
| #ifdef CONFIG_THERMAL | |
| struct thermal_zone_device *tzd; | |
| struct thermal_cooling_device *tcd; | |
| #endif | |
| #ifdef CONFIG_LEDS_TRIGGERS | |
| struct led_trigger *charging_full_trig; | |
| char *charging_full_trig_name; | |
| struct led_trigger *charging_trig; | |
| char *charging_trig_name; | |
| struct led_trigger *full_trig; | |
| char *full_trig_name; | |
| struct led_trigger *online_trig; | |
| char *online_trig_name; | |
| struct led_trigger *charging_blink_full_solid_trig; | |
| char *charging_blink_full_solid_trig_name; | |
| #endif | |
| }; | |
| /* | |
| * This is recommended structure to specify static power supply parameters. | |
| * Generic one, parametrizable for different power supplies. Power supply | |
| * class itself does not use it, but that's what implementing most platform | |
| * drivers, should try reuse for consistency. | |
| */ | |
| struct power_supply_info { | |
| const char *name; | |
| int technology; | |
| int voltage_max_design; | |
| int voltage_min_design; | |
| int charge_full_design; | |
| int charge_empty_design; | |
| int energy_full_design; | |
| int energy_empty_design; | |
| int use_for_apm; | |
| }; | |
| struct power_supply_battery_ocv_table { | |
| int ocv; /* microVolts */ | |
| int capacity; /* percent */ | |
| }; | |
| struct power_supply_resistance_temp_table { | |
| int temp; /* celsius */ | |
| int resistance; /* internal resistance percent */ | |
| }; | |
| #define POWER_SUPPLY_OCV_TEMP_MAX 20 | |
| /* | |
| * This is the recommended struct to manage static battery parameters, | |
| * populated by power_supply_get_battery_info(). Most platform drivers should | |
| * use these for consistency. | |
| * Its field names must correspond to elements in enum power_supply_property. | |
| * The default field value is -EINVAL. | |
| * Power supply class itself doesn't use this. | |
| */ | |
| struct power_supply_battery_info { | |
| int energy_full_design_uwh; /* microWatt-hours */ | |
| int charge_full_design_uah; /* microAmp-hours */ | |
| int voltage_min_design_uv; /* microVolts */ | |
| int voltage_max_design_uv; /* microVolts */ | |
| int tricklecharge_current_ua; /* microAmps */ | |
| int precharge_current_ua; /* microAmps */ | |
| int precharge_voltage_max_uv; /* microVolts */ | |
| int charge_term_current_ua; /* microAmps */ | |
| int charge_restart_voltage_uv; /* microVolts */ | |
| int overvoltage_limit_uv; /* microVolts */ | |
| int constant_charge_current_max_ua; /* microAmps */ | |
| int constant_charge_voltage_max_uv; /* microVolts */ | |
| int factory_internal_resistance_uohm; /* microOhms */ | |
| int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX];/* celsius */ | |
| int temp_ambient_alert_min; /* celsius */ | |
| int temp_ambient_alert_max; /* celsius */ | |
| int temp_alert_min; /* celsius */ | |
| int temp_alert_max; /* celsius */ | |
| int temp_min; /* celsius */ | |
| int temp_max; /* celsius */ | |
| struct power_supply_battery_ocv_table *ocv_table[POWER_SUPPLY_OCV_TEMP_MAX]; | |
| int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX]; | |
| struct power_supply_resistance_temp_table *resist_table; | |
| int resist_table_size; | |
| }; | |
| extern struct atomic_notifier_head power_supply_notifier; | |
| extern int power_supply_reg_notifier(struct notifier_block *nb); | |
| extern void power_supply_unreg_notifier(struct notifier_block *nb); | |
| extern struct power_supply *power_supply_get_by_name(const char *name); | |
| extern void power_supply_put(struct power_supply *psy); | |
| #ifdef CONFIG_OF | |
| extern struct power_supply *power_supply_get_by_phandle(struct device_node *np, | |
| const char *property); | |
| extern struct power_supply *devm_power_supply_get_by_phandle( | |
| struct device *dev, const char *property); | |
| #else /* !CONFIG_OF */ | |
| static inline struct power_supply * | |
| power_supply_get_by_phandle(struct device_node *np, const char *property) | |
| { return NULL; } | |
| static inline struct power_supply * | |
| devm_power_supply_get_by_phandle(struct device *dev, const char *property) | |
| { return NULL; } | |
| #endif /* CONFIG_OF */ | |
| extern int power_supply_get_battery_info(struct power_supply *psy, | |
| struct power_supply_battery_info *info); | |
| extern void power_supply_put_battery_info(struct power_supply *psy, | |
| struct power_supply_battery_info *info); | |
| extern int power_supply_ocv2cap_simple(struct power_supply_battery_ocv_table *table, | |
| int table_len, int ocv); | |
| extern struct power_supply_battery_ocv_table * | |
| power_supply_find_ocv2cap_table(struct power_supply_battery_info *info, | |
| int temp, int *table_len); | |
| extern int power_supply_batinfo_ocv2cap(struct power_supply_battery_info *info, | |
| int ocv, int temp); | |
| extern int | |
| power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table, | |
| int table_len, int temp); | |
| extern void power_supply_changed(struct power_supply *psy); | |
| extern int power_supply_am_i_supplied(struct power_supply *psy); | |
| extern int power_supply_set_input_current_limit_from_supplier( | |
| struct power_supply *psy); | |
| extern int power_supply_set_battery_charged(struct power_supply *psy); | |
| #ifdef CONFIG_POWER_SUPPLY | |
| extern int power_supply_is_system_supplied(void); | |
| #else | |
| static inline int power_supply_is_system_supplied(void) { return -ENOSYS; } | |
| #endif | |
| extern int power_supply_get_property(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| union power_supply_propval *val); | |
| extern int power_supply_set_property(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| const union power_supply_propval *val); | |
| extern int power_supply_property_is_writeable(struct power_supply *psy, | |
| enum power_supply_property psp); | |
| extern void power_supply_external_power_changed(struct power_supply *psy); | |
| extern struct power_supply *__must_check | |
| power_supply_register(struct device *parent, | |
| const struct power_supply_desc *desc, | |
| const struct power_supply_config *cfg); | |
| extern struct power_supply *__must_check | |
| power_supply_register_no_ws(struct device *parent, | |
| const struct power_supply_desc *desc, | |
| const struct power_supply_config *cfg); | |
| extern struct power_supply *__must_check | |
| devm_power_supply_register(struct device *parent, | |
| const struct power_supply_desc *desc, | |
| const struct power_supply_config *cfg); | |
| extern struct power_supply *__must_check | |
| devm_power_supply_register_no_ws(struct device *parent, | |
| const struct power_supply_desc *desc, | |
| const struct power_supply_config *cfg); | |
| extern void power_supply_unregister(struct power_supply *psy); | |
| extern int power_supply_powers(struct power_supply *psy, struct device *dev); | |
| #define to_power_supply(device) container_of(device, struct power_supply, dev) | |
| extern void *power_supply_get_drvdata(struct power_supply *psy); | |
| /* For APM emulation, think legacy userspace. */ | |
| extern struct class *power_supply_class; | |
| static inline bool power_supply_is_amp_property(enum power_supply_property psp) | |
| { | |
| switch (psp) { | |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | |
| case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN: | |
| case POWER_SUPPLY_PROP_CHARGE_FULL: | |
| case POWER_SUPPLY_PROP_CHARGE_EMPTY: | |
| case POWER_SUPPLY_PROP_CHARGE_NOW: | |
| case POWER_SUPPLY_PROP_CHARGE_AVG: | |
| case POWER_SUPPLY_PROP_CHARGE_COUNTER: | |
| case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: | |
| case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: | |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: | |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: | |
| case POWER_SUPPLY_PROP_CURRENT_MAX: | |
| case POWER_SUPPLY_PROP_CURRENT_NOW: | |
| case POWER_SUPPLY_PROP_CURRENT_AVG: | |
| case POWER_SUPPLY_PROP_CURRENT_BOOT: | |
| return 1; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static inline bool power_supply_is_watt_property(enum power_supply_property psp) | |
| { | |
| switch (psp) { | |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: | |
| case POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN: | |
| case POWER_SUPPLY_PROP_ENERGY_FULL: | |
| case POWER_SUPPLY_PROP_ENERGY_EMPTY: | |
| case POWER_SUPPLY_PROP_ENERGY_NOW: | |
| case POWER_SUPPLY_PROP_ENERGY_AVG: | |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: | |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: | |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: | |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: | |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: | |
| case POWER_SUPPLY_PROP_VOLTAGE_AVG: | |
| case POWER_SUPPLY_PROP_VOLTAGE_OCV: | |
| case POWER_SUPPLY_PROP_VOLTAGE_BOOT: | |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: | |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: | |
| case POWER_SUPPLY_PROP_POWER_NOW: | |
| return 1; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_POWER_SUPPLY_HWMON | |
| int power_supply_add_hwmon_sysfs(struct power_supply *psy); | |
| void power_supply_remove_hwmon_sysfs(struct power_supply *psy); | |
| #else | |
| static inline int power_supply_add_hwmon_sysfs(struct power_supply *psy) | |
| { | |
| return 0; | |
| } | |
| static inline | |
| void power_supply_remove_hwmon_sysfs(struct power_supply *psy) {} | |
| #endif | |
| #endif /* __LINUX_POWER_SUPPLY_H__ */ |