| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * TI pm33xx platform data | |
| * | |
| * Copyright (C) 2016-2018 Texas Instruments, Inc. | |
| * Dave Gerlach <d-gerlach@ti.com> | |
| */ | |
| #ifndef _LINUX_PLATFORM_DATA_PM33XX_H | |
| #define _LINUX_PLATFORM_DATA_PM33XX_H | |
| #include <linux/kbuild.h> | |
| #include <linux/types.h> | |
| /* | |
| * WFI Flags for sleep code control | |
| * | |
| * These flags allow PM code to exclude certain operations from happening | |
| * in the low level ASM code found in sleep33xx.S and sleep43xx.S | |
| * | |
| * WFI_FLAG_FLUSH_CACHE: Flush the ARM caches and disable caching. Only | |
| * needed when MPU will lose context. | |
| * WFI_FLAG_SELF_REFRESH: Let EMIF place DDR memory into self-refresh and | |
| * disable EMIF. | |
| * WFI_FLAG_SAVE_EMIF: Save context of all EMIF registers and restore in | |
| * resume path. Only needed if PER domain loses context | |
| * and must also have WFI_FLAG_SELF_REFRESH set. | |
| * WFI_FLAG_WAKE_M3: Disable MPU clock or clockdomain to cause wkup_m3 to | |
| * execute when WFI instruction executes. | |
| * WFI_FLAG_RTC_ONLY: Configure the RTC to enter RTC+DDR mode. | |
| */ | |
| #define WFI_FLAG_FLUSH_CACHE BIT(0) | |
| #define WFI_FLAG_SELF_REFRESH BIT(1) | |
| #define WFI_FLAG_SAVE_EMIF BIT(2) | |
| #define WFI_FLAG_WAKE_M3 BIT(3) | |
| #define WFI_FLAG_RTC_ONLY BIT(4) | |
| #ifndef __ASSEMBLER__ | |
| struct am33xx_pm_sram_addr { | |
| void (*do_wfi)(void); | |
| unsigned long *do_wfi_sz; | |
| unsigned long *resume_offset; | |
| unsigned long *emif_sram_table; | |
| unsigned long *ro_sram_data; | |
| unsigned long resume_address; | |
| }; | |
| struct am33xx_pm_platform_data { | |
| int (*init)(int (*idle)(u32 wfi_flags)); | |
| int (*deinit)(void); | |
| int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long), | |
| unsigned long args); | |
| int (*cpu_suspend)(int (*fn)(unsigned long), unsigned long args); | |
| void (*begin_suspend)(void); | |
| void (*finish_suspend)(void); | |
| struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); | |
| void (*save_context)(void); | |
| void (*restore_context)(void); | |
| int (*check_off_mode_enable)(void); | |
| }; | |
| struct am33xx_pm_sram_data { | |
| u32 wfi_flags; | |
| u32 l2_aux_ctrl_val; | |
| u32 l2_prefetch_ctrl_val; | |
| } __packed __aligned(8); | |
| struct am33xx_pm_ro_sram_data { | |
| u32 amx3_pm_sram_data_virt; | |
| u32 amx3_pm_sram_data_phys; | |
| void __iomem *rtc_base_virt; | |
| } __packed __aligned(8); | |
| #endif /* __ASSEMBLER__ */ | |
| #endif /* _LINUX_PLATFORM_DATA_PM33XX_H */ |