| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * RTC driver for the interal RTC block in the Amlogic Meson6, Meson8, | |
| * Meson8b and Meson8m2 SoCs. | |
| * | |
| * The RTC is split in to two parts, the AHB front end and a simple serial | |
| * connection to the actual registers. This driver manages both parts. | |
| * | |
| * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> | |
| * Copyright (c) 2015 Ben Dooks <ben.dooks@codethink.co.uk> for Codethink Ltd | |
| * Based on origin by Carlo Caione <carlo@endlessm.com> | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/nvmem-provider.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/reset.h> | |
| #include <linux/rtc.h> | |
| /* registers accessed from cpu bus */ | |
| #define RTC_ADDR0 0x00 | |
| #define RTC_ADDR0_LINE_SCLK BIT(0) | |
| #define RTC_ADDR0_LINE_SEN BIT(1) | |
| #define RTC_ADDR0_LINE_SDI BIT(2) | |
| #define RTC_ADDR0_START_SER BIT(17) | |
| #define RTC_ADDR0_WAIT_SER BIT(22) | |
| #define RTC_ADDR0_DATA GENMASK(31, 24) | |
| #define RTC_ADDR1 0x04 | |
| #define RTC_ADDR1_SDO BIT(0) | |
| #define RTC_ADDR1_S_READY BIT(1) | |
| #define RTC_ADDR2 0x08 | |
| #define RTC_ADDR3 0x0c | |
| #define RTC_REG4 0x10 | |
| #define RTC_REG4_STATIC_VALUE GENMASK(7, 0) | |
| /* rtc registers accessed via rtc-serial interface */ | |
| #define RTC_COUNTER (0) | |
| #define RTC_SEC_ADJ (2) | |
| #define RTC_REGMEM_0 (4) | |
| #define RTC_REGMEM_1 (5) | |
| #define RTC_REGMEM_2 (6) | |
| #define RTC_REGMEM_3 (7) | |
| #define RTC_ADDR_BITS (3) /* number of address bits to send */ | |
| #define RTC_DATA_BITS (32) /* number of data bits to tx/rx */ | |
| #define MESON_STATIC_BIAS_CUR (0x5 << 1) | |
| #define MESON_STATIC_VOLTAGE (0x3 << 11) | |
| #define MESON_STATIC_DEFAULT (MESON_STATIC_BIAS_CUR | MESON_STATIC_VOLTAGE) | |
| struct meson_rtc { | |
| struct rtc_device *rtc; /* rtc device we created */ | |
| struct device *dev; /* device we bound from */ | |
| struct reset_control *reset; /* reset source */ | |
| struct regulator *vdd; /* voltage input */ | |
| struct regmap *peripheral; /* peripheral registers */ | |
| struct regmap *serial; /* serial registers */ | |
| }; | |
| static const struct regmap_config meson_rtc_peripheral_regmap_config = { | |
| .name = "peripheral-registers", | |
| .reg_bits = 8, | |
| .val_bits = 32, | |
| .reg_stride = 4, | |
| .max_register = RTC_REG4, | |
| .fast_io = true, | |
| }; | |
| /* RTC front-end serialiser controls */ | |
| static void meson_rtc_sclk_pulse(struct meson_rtc *rtc) | |
| { | |
| udelay(5); | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 0); | |
| udelay(5); | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, | |
| RTC_ADDR0_LINE_SCLK); | |
| } | |
| static void meson_rtc_send_bit(struct meson_rtc *rtc, unsigned int bit) | |
| { | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, | |
| bit ? RTC_ADDR0_LINE_SDI : 0); | |
| meson_rtc_sclk_pulse(rtc); | |
| } | |
| static void meson_rtc_send_bits(struct meson_rtc *rtc, u32 data, | |
| unsigned int nr) | |
| { | |
| u32 bit = 1 << (nr - 1); | |
| while (bit) { | |
| meson_rtc_send_bit(rtc, data & bit); | |
| bit >>= 1; | |
| } | |
| } | |
| static void meson_rtc_set_dir(struct meson_rtc *rtc, u32 mode) | |
| { | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 0); | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); | |
| meson_rtc_send_bit(rtc, mode); | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); | |
| } | |
| static u32 meson_rtc_get_data(struct meson_rtc *rtc) | |
| { | |
| u32 tmp, val = 0; | |
| int bit; | |
| for (bit = 0; bit < RTC_DATA_BITS; bit++) { | |
| meson_rtc_sclk_pulse(rtc); | |
| val <<= 1; | |
| regmap_read(rtc->peripheral, RTC_ADDR1, &tmp); | |
| val |= tmp & RTC_ADDR1_SDO; | |
| } | |
| return val; | |
| } | |
| static int meson_rtc_get_bus(struct meson_rtc *rtc) | |
| { | |
| int ret, retries; | |
| u32 val; | |
| /* prepare bus for transfers, set all lines low */ | |
| val = RTC_ADDR0_LINE_SDI | RTC_ADDR0_LINE_SEN | RTC_ADDR0_LINE_SCLK; | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, val, 0); | |
| for (retries = 0; retries < 3; retries++) { | |
| /* wait for the bus to be ready */ | |
| if (!regmap_read_poll_timeout(rtc->peripheral, RTC_ADDR1, val, | |
| val & RTC_ADDR1_S_READY, 10, | |
| 10000)) | |
| return 0; | |
| dev_warn(rtc->dev, "failed to get bus, resetting RTC\n"); | |
| ret = reset_control_reset(rtc->reset); | |
| if (ret) | |
| return ret; | |
| } | |
| dev_err(rtc->dev, "bus is not ready\n"); | |
| return -ETIMEDOUT; | |
| } | |
| static int meson_rtc_serial_bus_reg_read(void *context, unsigned int reg, | |
| unsigned int *data) | |
| { | |
| struct meson_rtc *rtc = context; | |
| int ret; | |
| ret = meson_rtc_get_bus(rtc); | |
| if (ret) | |
| return ret; | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, | |
| RTC_ADDR0_LINE_SEN); | |
| meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); | |
| meson_rtc_set_dir(rtc, 0); | |
| *data = meson_rtc_get_data(rtc); | |
| return 0; | |
| } | |
| static int meson_rtc_serial_bus_reg_write(void *context, unsigned int reg, | |
| unsigned int data) | |
| { | |
| struct meson_rtc *rtc = context; | |
| int ret; | |
| ret = meson_rtc_get_bus(rtc); | |
| if (ret) | |
| return ret; | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, | |
| RTC_ADDR0_LINE_SEN); | |
| meson_rtc_send_bits(rtc, data, RTC_DATA_BITS); | |
| meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); | |
| meson_rtc_set_dir(rtc, 1); | |
| return 0; | |
| } | |
| static const struct regmap_bus meson_rtc_serial_bus = { | |
| .reg_read = meson_rtc_serial_bus_reg_read, | |
| .reg_write = meson_rtc_serial_bus_reg_write, | |
| }; | |
| static const struct regmap_config meson_rtc_serial_regmap_config = { | |
| .name = "serial-registers", | |
| .reg_bits = 4, | |
| .reg_stride = 1, | |
| .val_bits = 32, | |
| .max_register = RTC_REGMEM_3, | |
| .fast_io = false, | |
| }; | |
| static int meson_rtc_write_static(struct meson_rtc *rtc, u32 data) | |
| { | |
| u32 tmp; | |
| regmap_write(rtc->peripheral, RTC_REG4, | |
| FIELD_PREP(RTC_REG4_STATIC_VALUE, (data >> 8))); | |
| /* write the static value and start the auto serializer */ | |
| tmp = FIELD_PREP(RTC_ADDR0_DATA, (data & 0xff)) | RTC_ADDR0_START_SER; | |
| regmap_update_bits(rtc->peripheral, RTC_ADDR0, | |
| RTC_ADDR0_DATA | RTC_ADDR0_START_SER, tmp); | |
| /* wait for the auto serializer to complete */ | |
| return regmap_read_poll_timeout(rtc->peripheral, RTC_REG4, tmp, | |
| !(tmp & RTC_ADDR0_WAIT_SER), 10, | |
| 10000); | |
| } | |
| /* RTC interface layer functions */ | |
| static int meson_rtc_gettime(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct meson_rtc *rtc = dev_get_drvdata(dev); | |
| u32 time; | |
| int ret; | |
| ret = regmap_read(rtc->serial, RTC_COUNTER, &time); | |
| if (!ret) | |
| rtc_time64_to_tm(time, tm); | |
| return ret; | |
| } | |
| static int meson_rtc_settime(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct meson_rtc *rtc = dev_get_drvdata(dev); | |
| return regmap_write(rtc->serial, RTC_COUNTER, rtc_tm_to_time64(tm)); | |
| } | |
| static const struct rtc_class_ops meson_rtc_ops = { | |
| .read_time = meson_rtc_gettime, | |
| .set_time = meson_rtc_settime, | |
| }; | |
| /* NVMEM interface layer functions */ | |
| static int meson_rtc_regmem_read(void *context, unsigned int offset, | |
| void *buf, size_t bytes) | |
| { | |
| struct meson_rtc *rtc = context; | |
| unsigned int read_offset, read_size; | |
| read_offset = RTC_REGMEM_0 + (offset / 4); | |
| read_size = bytes / 4; | |
| return regmap_bulk_read(rtc->serial, read_offset, buf, read_size); | |
| } | |
| static int meson_rtc_regmem_write(void *context, unsigned int offset, | |
| void *buf, size_t bytes) | |
| { | |
| struct meson_rtc *rtc = context; | |
| unsigned int write_offset, write_size; | |
| write_offset = RTC_REGMEM_0 + (offset / 4); | |
| write_size = bytes / 4; | |
| return regmap_bulk_write(rtc->serial, write_offset, buf, write_size); | |
| } | |
| static int meson_rtc_probe(struct platform_device *pdev) | |
| { | |
| struct nvmem_config meson_rtc_nvmem_config = { | |
| .name = "meson-rtc-regmem", | |
| .type = NVMEM_TYPE_BATTERY_BACKED, | |
| .word_size = 4, | |
| .stride = 4, | |
| .size = 4 * 4, | |
| .reg_read = meson_rtc_regmem_read, | |
| .reg_write = meson_rtc_regmem_write, | |
| }; | |
| struct device *dev = &pdev->dev; | |
| struct meson_rtc *rtc; | |
| void __iomem *base; | |
| int ret; | |
| u32 tm; | |
| rtc = devm_kzalloc(dev, sizeof(struct meson_rtc), GFP_KERNEL); | |
| if (!rtc) | |
| return -ENOMEM; | |
| rtc->rtc = devm_rtc_allocate_device(dev); | |
| if (IS_ERR(rtc->rtc)) | |
| return PTR_ERR(rtc->rtc); | |
| platform_set_drvdata(pdev, rtc); | |
| rtc->dev = dev; | |
| rtc->rtc->ops = &meson_rtc_ops; | |
| rtc->rtc->range_max = U32_MAX; | |
| base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| rtc->peripheral = devm_regmap_init_mmio(dev, base, | |
| &meson_rtc_peripheral_regmap_config); | |
| if (IS_ERR(rtc->peripheral)) { | |
| dev_err(dev, "failed to create peripheral regmap\n"); | |
| return PTR_ERR(rtc->peripheral); | |
| } | |
| rtc->reset = devm_reset_control_get(dev, NULL); | |
| if (IS_ERR(rtc->reset)) { | |
| dev_err(dev, "missing reset line\n"); | |
| return PTR_ERR(rtc->reset); | |
| } | |
| rtc->vdd = devm_regulator_get(dev, "vdd"); | |
| if (IS_ERR(rtc->vdd)) { | |
| dev_err(dev, "failed to get the vdd-supply\n"); | |
| return PTR_ERR(rtc->vdd); | |
| } | |
| ret = regulator_enable(rtc->vdd); | |
| if (ret) { | |
| dev_err(dev, "failed to enable vdd-supply\n"); | |
| return ret; | |
| } | |
| ret = meson_rtc_write_static(rtc, MESON_STATIC_DEFAULT); | |
| if (ret) { | |
| dev_err(dev, "failed to set static values\n"); | |
| goto out_disable_vdd; | |
| } | |
| rtc->serial = devm_regmap_init(dev, &meson_rtc_serial_bus, rtc, | |
| &meson_rtc_serial_regmap_config); | |
| if (IS_ERR(rtc->serial)) { | |
| dev_err(dev, "failed to create serial regmap\n"); | |
| ret = PTR_ERR(rtc->serial); | |
| goto out_disable_vdd; | |
| } | |
| /* | |
| * check if we can read RTC counter, if not then the RTC is probably | |
| * not functional. If it isn't probably best to not bind. | |
| */ | |
| ret = regmap_read(rtc->serial, RTC_COUNTER, &tm); | |
| if (ret) { | |
| dev_err(dev, "cannot read RTC counter, RTC not functional\n"); | |
| goto out_disable_vdd; | |
| } | |
| meson_rtc_nvmem_config.priv = rtc; | |
| ret = rtc_nvmem_register(rtc->rtc, &meson_rtc_nvmem_config); | |
| if (ret) | |
| goto out_disable_vdd; | |
| ret = rtc_register_device(rtc->rtc); | |
| if (ret) | |
| goto out_disable_vdd; | |
| return 0; | |
| out_disable_vdd: | |
| regulator_disable(rtc->vdd); | |
| return ret; | |
| } | |
| static const struct of_device_id meson_rtc_dt_match[] = { | |
| { .compatible = "amlogic,meson6-rtc", }, | |
| { .compatible = "amlogic,meson8-rtc", }, | |
| { .compatible = "amlogic,meson8b-rtc", }, | |
| { .compatible = "amlogic,meson8m2-rtc", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, meson_rtc_dt_match); | |
| static struct platform_driver meson_rtc_driver = { | |
| .probe = meson_rtc_probe, | |
| .driver = { | |
| .name = "meson-rtc", | |
| .of_match_table = of_match_ptr(meson_rtc_dt_match), | |
| }, | |
| }; | |
| module_platform_driver(meson_rtc_driver); | |
| MODULE_DESCRIPTION("Amlogic Meson RTC Driver"); | |
| MODULE_AUTHOR("Ben Dooks <ben.doosk@codethink.co.uk>"); | |
| MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_ALIAS("platform:meson-rtc"); |