|  | // SPDX-License-Identifier: GPL-1.0+ | 
|  | /* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike) | 
|  | Ethernet cards on Linux */ | 
|  | /* Based on the former daynaport.c driver, by Alan Cox.  Some code | 
|  | taken from or inspired by skeleton.c by Donald Becker, acenic.c by | 
|  | Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker. */ | 
|  |  | 
|  | /* 2000-02-28: support added for Dayna and Kinetics cards by | 
|  | A.G.deWijn@phys.uu.nl */ | 
|  | /* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */ | 
|  | /* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */ | 
|  | /* 2001-05-15: support for Cabletron ported from old daynaport driver | 
|  | * and fixed access to Sonic Sys card which masquerades as a Farallon | 
|  | * by rayk@knightsmanor.org */ | 
|  | /* 2002-12-30: Try to support more cards, some clues from NetBSD driver */ | 
|  | /* 2003-12-26: Make sure Asante cards always work. */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/fcntl.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/nubus.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <asm/dma.h> | 
|  | #include <asm/hwtest.h> | 
|  | #include <asm/macints.h> | 
|  |  | 
|  | static char version[] = | 
|  | "v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; | 
|  |  | 
|  | #define EI_SHIFT(x)	(ei_local->reg_offset[x]) | 
|  | #define ei_inb(port)	in_8(port) | 
|  | #define ei_outb(val, port)	out_8(port, val) | 
|  | #define ei_inb_p(port)	in_8(port) | 
|  | #define ei_outb_p(val, port)	out_8(port, val) | 
|  |  | 
|  | #include "lib8390.c" | 
|  |  | 
|  | #define WD_START_PG			0x00	/* First page of TX buffer */ | 
|  | #define CABLETRON_RX_START_PG		0x00    /* First page of RX buffer */ | 
|  | #define CABLETRON_RX_STOP_PG		0x30    /* Last page +1 of RX ring */ | 
|  | #define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG | 
|  | /* First page of TX buffer */ | 
|  |  | 
|  | /* | 
|  | * Unfortunately it seems we have to hardcode these for the moment | 
|  | * Shouldn't the card know about this? | 
|  | * Does anyone know where to read it off the card? | 
|  | * Do we trust the data provided by the card? | 
|  | */ | 
|  |  | 
|  | #define DAYNA_8390_BASE		0x80000 | 
|  | #define DAYNA_8390_MEM		0x00000 | 
|  |  | 
|  | #define CABLETRON_8390_BASE	0x90000 | 
|  | #define CABLETRON_8390_MEM	0x00000 | 
|  |  | 
|  | #define INTERLAN_8390_BASE	0xE0000 | 
|  | #define INTERLAN_8390_MEM	0xD0000 | 
|  |  | 
|  | enum mac8390_type { | 
|  | MAC8390_NONE = -1, | 
|  | MAC8390_APPLE, | 
|  | MAC8390_ASANTE, | 
|  | MAC8390_FARALLON, | 
|  | MAC8390_CABLETRON, | 
|  | MAC8390_DAYNA, | 
|  | MAC8390_INTERLAN, | 
|  | MAC8390_KINETICS, | 
|  | }; | 
|  |  | 
|  | static const char *cardname[] = { | 
|  | "apple", | 
|  | "asante", | 
|  | "farallon", | 
|  | "cabletron", | 
|  | "dayna", | 
|  | "interlan", | 
|  | "kinetics", | 
|  | }; | 
|  |  | 
|  | static const int word16[] = { | 
|  | 1, /* apple */ | 
|  | 1, /* asante */ | 
|  | 1, /* farallon */ | 
|  | 1, /* cabletron */ | 
|  | 0, /* dayna */ | 
|  | 1, /* interlan */ | 
|  | 0, /* kinetics */ | 
|  | }; | 
|  |  | 
|  | /* on which cards do we use NuBus resources? */ | 
|  | static const int useresources[] = { | 
|  | 1, /* apple */ | 
|  | 1, /* asante */ | 
|  | 1, /* farallon */ | 
|  | 0, /* cabletron */ | 
|  | 0, /* dayna */ | 
|  | 0, /* interlan */ | 
|  | 0, /* kinetics */ | 
|  | }; | 
|  |  | 
|  | enum mac8390_access { | 
|  | ACCESS_UNKNOWN = 0, | 
|  | ACCESS_32, | 
|  | ACCESS_16, | 
|  | }; | 
|  |  | 
|  | extern int mac8390_memtest(struct net_device *dev); | 
|  | static int mac8390_initdev(struct net_device *dev, struct nubus_board *board, | 
|  | enum mac8390_type type); | 
|  |  | 
|  | static int mac8390_open(struct net_device *dev); | 
|  | static int mac8390_close(struct net_device *dev); | 
|  | static void mac8390_no_reset(struct net_device *dev); | 
|  | static void interlan_reset(struct net_device *dev); | 
|  |  | 
|  | /* Sane (32-bit chunk memory read/write) - Some Farallon and Apple do this*/ | 
|  | static void sane_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page); | 
|  | static void sane_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset); | 
|  | static void sane_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, const int start_page); | 
|  |  | 
|  | /* dayna_memcpy to and from card */ | 
|  | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, | 
|  | int from, int count); | 
|  | static void dayna_memcpy_tocard(struct net_device *dev, int to, | 
|  | const void *from, int count); | 
|  |  | 
|  | /* Dayna - Dayna/Kinetics use this */ | 
|  | static void dayna_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page); | 
|  | static void dayna_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset); | 
|  | static void dayna_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, int start_page); | 
|  |  | 
|  | /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */ | 
|  | static void slow_sane_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page); | 
|  | static void slow_sane_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset); | 
|  | static void slow_sane_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, int start_page); | 
|  | static void word_memcpy_tocard(unsigned long tp, const void *fp, int count); | 
|  | static void word_memcpy_fromcard(void *tp, unsigned long fp, int count); | 
|  |  | 
|  | static enum mac8390_type mac8390_ident(struct nubus_rsrc *fres) | 
|  | { | 
|  | switch (fres->dr_sw) { | 
|  | case NUBUS_DRSW_3COM: | 
|  | switch (fres->dr_hw) { | 
|  | case NUBUS_DRHW_APPLE_SONIC_NB: | 
|  | case NUBUS_DRHW_APPLE_SONIC_LC: | 
|  | case NUBUS_DRHW_SONNET: | 
|  | return MAC8390_NONE; | 
|  | default: | 
|  | return MAC8390_APPLE; | 
|  | } | 
|  |  | 
|  | case NUBUS_DRSW_APPLE: | 
|  | switch (fres->dr_hw) { | 
|  | case NUBUS_DRHW_ASANTE_LC: | 
|  | return MAC8390_NONE; | 
|  | case NUBUS_DRHW_CABLETRON: | 
|  | return MAC8390_CABLETRON; | 
|  | default: | 
|  | return MAC8390_APPLE; | 
|  | } | 
|  |  | 
|  | case NUBUS_DRSW_ASANTE: | 
|  | return MAC8390_ASANTE; | 
|  |  | 
|  | case NUBUS_DRSW_TECHWORKS: | 
|  | case NUBUS_DRSW_DAYNA2: | 
|  | case NUBUS_DRSW_DAYNA_LC: | 
|  | if (fres->dr_hw == NUBUS_DRHW_CABLETRON) | 
|  | return MAC8390_CABLETRON; | 
|  | else | 
|  | return MAC8390_APPLE; | 
|  |  | 
|  | case NUBUS_DRSW_FARALLON: | 
|  | return MAC8390_FARALLON; | 
|  |  | 
|  | case NUBUS_DRSW_KINETICS: | 
|  | switch (fres->dr_hw) { | 
|  | case NUBUS_DRHW_INTERLAN: | 
|  | return MAC8390_INTERLAN; | 
|  | default: | 
|  | return MAC8390_KINETICS; | 
|  | } | 
|  |  | 
|  | case NUBUS_DRSW_DAYNA: | 
|  | /* | 
|  | * These correspond to Dayna Sonic cards | 
|  | * which use the macsonic driver | 
|  | */ | 
|  | if (fres->dr_hw == NUBUS_DRHW_SMC9194 || | 
|  | fres->dr_hw == NUBUS_DRHW_INTERLAN) | 
|  | return MAC8390_NONE; | 
|  | else | 
|  | return MAC8390_DAYNA; | 
|  | } | 
|  | return MAC8390_NONE; | 
|  | } | 
|  |  | 
|  | static enum mac8390_access mac8390_testio(unsigned long membase) | 
|  | { | 
|  | u32 outdata = 0xA5A0B5B0; | 
|  | u32 indata = 0; | 
|  |  | 
|  | /* Try writing 32 bits */ | 
|  | nubus_writel(outdata, membase); | 
|  | /* Now read it back */ | 
|  | indata = nubus_readl(membase); | 
|  | if (outdata == indata) | 
|  | return ACCESS_32; | 
|  |  | 
|  | outdata = 0xC5C0D5D0; | 
|  | indata = 0; | 
|  |  | 
|  | /* Write 16 bit output */ | 
|  | word_memcpy_tocard(membase, &outdata, 4); | 
|  | /* Now read it back */ | 
|  | word_memcpy_fromcard(&indata, membase, 4); | 
|  | if (outdata == indata) | 
|  | return ACCESS_16; | 
|  |  | 
|  | return ACCESS_UNKNOWN; | 
|  | } | 
|  |  | 
|  | static int mac8390_memsize(unsigned long membase) | 
|  | { | 
|  | unsigned long flags; | 
|  | int i, j; | 
|  |  | 
|  | local_irq_save(flags); | 
|  | /* Check up to 32K in 4K increments */ | 
|  | for (i = 0; i < 8; i++) { | 
|  | volatile unsigned short *m = (unsigned short *)(membase + (i * 0x1000)); | 
|  |  | 
|  | /* Unwriteable - we have a fully decoded card and the | 
|  | RAM end located */ | 
|  | if (hwreg_present(m) == 0) | 
|  | break; | 
|  |  | 
|  | /* write a distinctive byte */ | 
|  | *m = 0xA5A0 | i; | 
|  | /* check that we read back what we wrote */ | 
|  | if (*m != (0xA5A0 | i)) | 
|  | break; | 
|  |  | 
|  | /* check for partial decode and wrap */ | 
|  | for (j = 0; j < i; j++) { | 
|  | volatile unsigned short *p = (unsigned short *)(membase + (j * 0x1000)); | 
|  | if (*p != (0xA5A0 | j)) | 
|  | break; | 
|  | } | 
|  | } | 
|  | local_irq_restore(flags); | 
|  | /* | 
|  | * in any case, we stopped once we tried one block too many, | 
|  | * or once we reached 32K | 
|  | */ | 
|  | return i * 0x1000; | 
|  | } | 
|  |  | 
|  | static bool mac8390_rsrc_init(struct net_device *dev, | 
|  | struct nubus_rsrc *fres, | 
|  | enum mac8390_type cardtype) | 
|  | { | 
|  | struct nubus_board *board = fres->board; | 
|  | struct nubus_dir dir; | 
|  | struct nubus_dirent ent; | 
|  | int offset; | 
|  | volatile unsigned short *i; | 
|  | u8 addr[ETH_ALEN]; | 
|  |  | 
|  | dev->irq = SLOT2IRQ(board->slot); | 
|  | /* This is getting to be a habit */ | 
|  | dev->base_addr = board->slot_addr | ((board->slot & 0xf) << 20); | 
|  |  | 
|  | /* | 
|  | * Get some Nubus info - we will trust the card's idea | 
|  | * of where its memory and registers are. | 
|  | */ | 
|  |  | 
|  | if (nubus_get_func_dir(fres, &dir) == -1) { | 
|  | dev_err(&board->dev, | 
|  | "Unable to get Nubus functional directory\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* Get the MAC address */ | 
|  | if (nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent) == -1) { | 
|  | dev_info(&board->dev, "MAC address resource not found\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | nubus_get_rsrc_mem(addr, &ent, 6); | 
|  | eth_hw_addr_set(dev, addr); | 
|  |  | 
|  | if (useresources[cardtype] == 1) { | 
|  | nubus_rewinddir(&dir); | 
|  | if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, | 
|  | &ent) == -1) { | 
|  | dev_err(&board->dev, | 
|  | "Memory offset resource not found\n"); | 
|  | return false; | 
|  | } | 
|  | nubus_get_rsrc_mem(&offset, &ent, 4); | 
|  | dev->mem_start = dev->base_addr + offset; | 
|  | /* yes, this is how the Apple driver does it */ | 
|  | dev->base_addr = dev->mem_start + 0x10000; | 
|  | nubus_rewinddir(&dir); | 
|  | if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, | 
|  | &ent) == -1) { | 
|  | dev_info(&board->dev, | 
|  | "Memory length resource not found, probing\n"); | 
|  | offset = mac8390_memsize(dev->mem_start); | 
|  | } else { | 
|  | nubus_get_rsrc_mem(&offset, &ent, 4); | 
|  | } | 
|  | dev->mem_end = dev->mem_start + offset; | 
|  | } else { | 
|  | switch (cardtype) { | 
|  | case MAC8390_KINETICS: | 
|  | case MAC8390_DAYNA: /* it's the same */ | 
|  | dev->base_addr = (int)(board->slot_addr + | 
|  | DAYNA_8390_BASE); | 
|  | dev->mem_start = (int)(board->slot_addr + | 
|  | DAYNA_8390_MEM); | 
|  | dev->mem_end = dev->mem_start + | 
|  | mac8390_memsize(dev->mem_start); | 
|  | break; | 
|  | case MAC8390_INTERLAN: | 
|  | dev->base_addr = (int)(board->slot_addr + | 
|  | INTERLAN_8390_BASE); | 
|  | dev->mem_start = (int)(board->slot_addr + | 
|  | INTERLAN_8390_MEM); | 
|  | dev->mem_end = dev->mem_start + | 
|  | mac8390_memsize(dev->mem_start); | 
|  | break; | 
|  | case MAC8390_CABLETRON: | 
|  | dev->base_addr = (int)(board->slot_addr + | 
|  | CABLETRON_8390_BASE); | 
|  | dev->mem_start = (int)(board->slot_addr + | 
|  | CABLETRON_8390_MEM); | 
|  | /* The base address is unreadable if 0x00 | 
|  | * has been written to the command register | 
|  | * Reset the chip by writing E8390_NODMA + | 
|  | *   E8390_PAGE0 + E8390_STOP just to be | 
|  | *   sure | 
|  | */ | 
|  | i = (void *)dev->base_addr; | 
|  | *i = 0x21; | 
|  | dev->mem_end = dev->mem_start + | 
|  | mac8390_memsize(dev->mem_start); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | dev_err(&board->dev, | 
|  | "No known base address for card type\n"); | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int mac8390_device_probe(struct nubus_board *board) | 
|  | { | 
|  | struct net_device *dev; | 
|  | int err = -ENODEV; | 
|  | struct nubus_rsrc *fres; | 
|  | enum mac8390_type cardtype = MAC8390_NONE; | 
|  |  | 
|  | dev = ____alloc_ei_netdev(0); | 
|  | if (!dev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | SET_NETDEV_DEV(dev, &board->dev); | 
|  |  | 
|  | for_each_board_func_rsrc(board, fres) { | 
|  | if (fres->category != NUBUS_CAT_NETWORK || | 
|  | fres->type != NUBUS_TYPE_ETHERNET) | 
|  | continue; | 
|  |  | 
|  | cardtype = mac8390_ident(fres); | 
|  | if (cardtype == MAC8390_NONE) | 
|  | continue; | 
|  |  | 
|  | if (mac8390_rsrc_init(dev, fres, cardtype)) | 
|  | break; | 
|  | } | 
|  | if (!fres) | 
|  | goto out; | 
|  |  | 
|  | err = mac8390_initdev(dev, board, cardtype); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = register_netdev(dev); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | nubus_set_drvdata(board, dev); | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | free_netdev(dev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void mac8390_device_remove(struct nubus_board *board) | 
|  | { | 
|  | struct net_device *dev = nubus_get_drvdata(board); | 
|  |  | 
|  | unregister_netdev(dev); | 
|  | free_netdev(dev); | 
|  | } | 
|  |  | 
|  | static struct nubus_driver mac8390_driver = { | 
|  | .probe = mac8390_device_probe, | 
|  | .remove = mac8390_device_remove, | 
|  | .driver = { | 
|  | .name = KBUILD_MODNAME, | 
|  | .owner = THIS_MODULE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others"); | 
|  | MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static int __init mac8390_init(void) | 
|  | { | 
|  | return nubus_driver_register(&mac8390_driver); | 
|  | } | 
|  | module_init(mac8390_init); | 
|  |  | 
|  | static void __exit mac8390_exit(void) | 
|  | { | 
|  | nubus_driver_unregister(&mac8390_driver); | 
|  | } | 
|  | module_exit(mac8390_exit); | 
|  |  | 
|  | static const struct net_device_ops mac8390_netdev_ops = { | 
|  | .ndo_open 		= mac8390_open, | 
|  | .ndo_stop		= mac8390_close, | 
|  | .ndo_start_xmit		= __ei_start_xmit, | 
|  | .ndo_tx_timeout		= __ei_tx_timeout, | 
|  | .ndo_get_stats		= __ei_get_stats, | 
|  | .ndo_set_rx_mode	= __ei_set_multicast_list, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | .ndo_set_mac_address 	= eth_mac_addr, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller	= __ei_poll, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int mac8390_initdev(struct net_device *dev, struct nubus_board *board, | 
|  | enum mac8390_type type) | 
|  | { | 
|  | static u32 fwrd4_offsets[16] = { | 
|  | 0,      4,      8,      12, | 
|  | 16,     20,     24,     28, | 
|  | 32,     36,     40,     44, | 
|  | 48,     52,     56,     60 | 
|  | }; | 
|  | static u32 back4_offsets[16] = { | 
|  | 60,     56,     52,     48, | 
|  | 44,     40,     36,     32, | 
|  | 28,     24,     20,     16, | 
|  | 12,     8,      4,      0 | 
|  | }; | 
|  | static u32 fwrd2_offsets[16] = { | 
|  | 0,      2,      4,      6, | 
|  | 8,     10,     12,     14, | 
|  | 16,    18,     20,     22, | 
|  | 24,    26,     28,     30 | 
|  | }; | 
|  |  | 
|  | int access_bitmode = 0; | 
|  |  | 
|  | /* Now fill in our stuff */ | 
|  | dev->netdev_ops = &mac8390_netdev_ops; | 
|  |  | 
|  | /* GAR, ei_status is actually a macro even though it looks global */ | 
|  | ei_status.name = cardname[type]; | 
|  | ei_status.word16 = word16[type]; | 
|  |  | 
|  | /* Cabletron's TX/RX buffers are backwards */ | 
|  | if (type == MAC8390_CABLETRON) { | 
|  | ei_status.tx_start_page = CABLETRON_TX_START_PG; | 
|  | ei_status.rx_start_page = CABLETRON_RX_START_PG; | 
|  | ei_status.stop_page = CABLETRON_RX_STOP_PG; | 
|  | ei_status.rmem_start = dev->mem_start; | 
|  | ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256; | 
|  | } else { | 
|  | ei_status.tx_start_page = WD_START_PG; | 
|  | ei_status.rx_start_page = WD_START_PG + TX_PAGES; | 
|  | ei_status.stop_page = (dev->mem_end - dev->mem_start)/256; | 
|  | ei_status.rmem_start = dev->mem_start + TX_PAGES*256; | 
|  | ei_status.rmem_end = dev->mem_end; | 
|  | } | 
|  |  | 
|  | /* Fill in model-specific information and functions */ | 
|  | switch (type) { | 
|  | case MAC8390_FARALLON: | 
|  | case MAC8390_APPLE: | 
|  | switch (mac8390_testio(dev->mem_start)) { | 
|  | case ACCESS_UNKNOWN: | 
|  | dev_err(&board->dev, | 
|  | "Don't know how to access card memory\n"); | 
|  | return -ENODEV; | 
|  |  | 
|  | case ACCESS_16: | 
|  | /* 16 bit card, register map is reversed */ | 
|  | ei_status.reset_8390 = mac8390_no_reset; | 
|  | ei_status.block_input = slow_sane_block_input; | 
|  | ei_status.block_output = slow_sane_block_output; | 
|  | ei_status.get_8390_hdr = slow_sane_get_8390_hdr; | 
|  | ei_status.reg_offset = back4_offsets; | 
|  | break; | 
|  |  | 
|  | case ACCESS_32: | 
|  | /* 32 bit card, register map is reversed */ | 
|  | ei_status.reset_8390 = mac8390_no_reset; | 
|  | ei_status.block_input = sane_block_input; | 
|  | ei_status.block_output = sane_block_output; | 
|  | ei_status.get_8390_hdr = sane_get_8390_hdr; | 
|  | ei_status.reg_offset = back4_offsets; | 
|  | access_bitmode = 1; | 
|  | break; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case MAC8390_ASANTE: | 
|  | /* Some Asante cards pass the 32 bit test | 
|  | * but overwrite system memory when run at 32 bit. | 
|  | * so we run them all at 16 bit. | 
|  | */ | 
|  | ei_status.reset_8390 = mac8390_no_reset; | 
|  | ei_status.block_input = slow_sane_block_input; | 
|  | ei_status.block_output = slow_sane_block_output; | 
|  | ei_status.get_8390_hdr = slow_sane_get_8390_hdr; | 
|  | ei_status.reg_offset = back4_offsets; | 
|  | break; | 
|  |  | 
|  | case MAC8390_CABLETRON: | 
|  | /* 16 bit card, register map is short forward */ | 
|  | ei_status.reset_8390 = mac8390_no_reset; | 
|  | ei_status.block_input = slow_sane_block_input; | 
|  | ei_status.block_output = slow_sane_block_output; | 
|  | ei_status.get_8390_hdr = slow_sane_get_8390_hdr; | 
|  | ei_status.reg_offset = fwrd2_offsets; | 
|  | break; | 
|  |  | 
|  | case MAC8390_DAYNA: | 
|  | case MAC8390_KINETICS: | 
|  | /* 16 bit memory, register map is forward */ | 
|  | /* dayna and similar */ | 
|  | ei_status.reset_8390 = mac8390_no_reset; | 
|  | ei_status.block_input = dayna_block_input; | 
|  | ei_status.block_output = dayna_block_output; | 
|  | ei_status.get_8390_hdr = dayna_get_8390_hdr; | 
|  | ei_status.reg_offset = fwrd4_offsets; | 
|  | break; | 
|  |  | 
|  | case MAC8390_INTERLAN: | 
|  | /* 16 bit memory, register map is forward */ | 
|  | ei_status.reset_8390 = interlan_reset; | 
|  | ei_status.block_input = slow_sane_block_input; | 
|  | ei_status.block_output = slow_sane_block_output; | 
|  | ei_status.get_8390_hdr = slow_sane_get_8390_hdr; | 
|  | ei_status.reg_offset = fwrd4_offsets; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | dev_err(&board->dev, "Unsupported card type\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | __NS8390_init(dev, 0); | 
|  |  | 
|  | /* Good, done, now spit out some messages */ | 
|  | dev_info(&board->dev, "%s (type %s)\n", board->name, cardname[type]); | 
|  | dev_info(&board->dev, "MAC %pM, IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n", | 
|  | dev->dev_addr, dev->irq, | 
|  | (unsigned int)(dev->mem_end - dev->mem_start) >> 10, | 
|  | dev->mem_start, access_bitmode ? 32 : 16); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mac8390_open(struct net_device *dev) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | __ei_open(dev); | 
|  | err = request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev); | 
|  | if (err) | 
|  | pr_err("%s: unable to get IRQ %d\n", dev->name, dev->irq); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mac8390_close(struct net_device *dev) | 
|  | { | 
|  | free_irq(dev->irq, dev); | 
|  | __ei_close(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mac8390_no_reset(struct net_device *dev) | 
|  | { | 
|  | struct ei_device *ei_local = netdev_priv(dev); | 
|  |  | 
|  | ei_status.txing = 0; | 
|  | netif_info(ei_local, hw, dev, "reset not supported\n"); | 
|  | } | 
|  |  | 
|  | static void interlan_reset(struct net_device *dev) | 
|  | { | 
|  | unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq)); | 
|  | struct ei_device *ei_local = netdev_priv(dev); | 
|  |  | 
|  | netif_info(ei_local, hw, dev, "Need to reset the NS8390 t=%lu...", | 
|  | jiffies); | 
|  | ei_status.txing = 0; | 
|  | target[0xC0000] = 0; | 
|  | if (netif_msg_hw(ei_local)) | 
|  | pr_cont("reset complete\n"); | 
|  | } | 
|  |  | 
|  | /* dayna_memcpy_fromio/dayna_memcpy_toio */ | 
|  | /* directly from daynaport.c by Alan Cox */ | 
|  | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, | 
|  | int count) | 
|  | { | 
|  | volatile unsigned char *ptr; | 
|  | unsigned char *target = to; | 
|  | from <<= 1;	/* word, skip overhead */ | 
|  | ptr = (unsigned char *)(dev->mem_start+from); | 
|  | /* Leading byte? */ | 
|  | if (from & 2) { | 
|  | *target++ = ptr[-1]; | 
|  | ptr += 2; | 
|  | count--; | 
|  | } | 
|  | while (count >= 2) { | 
|  | *(unsigned short *)target = *(unsigned short volatile *)ptr; | 
|  | ptr += 4;			/* skip cruft */ | 
|  | target += 2; | 
|  | count -= 2; | 
|  | } | 
|  | /* Trailing byte? */ | 
|  | if (count) | 
|  | *target = *ptr; | 
|  | } | 
|  |  | 
|  | static void dayna_memcpy_tocard(struct net_device *dev, int to, | 
|  | const void *from, int count) | 
|  | { | 
|  | volatile unsigned short *ptr; | 
|  | const unsigned char *src = from; | 
|  | to <<= 1;	/* word, skip overhead */ | 
|  | ptr = (unsigned short *)(dev->mem_start+to); | 
|  | /* Leading byte? */ | 
|  | if (to & 2) {		/* avoid a byte write (stomps on other data) */ | 
|  | ptr[-1] = (ptr[-1]&0xFF00)|*src++; | 
|  | ptr++; | 
|  | count--; | 
|  | } | 
|  | while (count >= 2) { | 
|  | *ptr++ = *(unsigned short *)src;	/* Copy and */ | 
|  | ptr++;			/* skip cruft */ | 
|  | src += 2; | 
|  | count -= 2; | 
|  | } | 
|  | /* Trailing byte? */ | 
|  | if (count) { | 
|  | /* card doesn't like byte writes */ | 
|  | *ptr = (*ptr & 0x00FF) | (*src << 8); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* sane block input/output */ | 
|  | static void sane_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page) | 
|  | { | 
|  | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
|  | memcpy_fromio(hdr, (void __iomem *)dev->mem_start + hdr_start, 4); | 
|  | /* Fix endianness */ | 
|  | hdr->count = swab16(hdr->count); | 
|  | } | 
|  |  | 
|  | static void sane_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset) | 
|  | { | 
|  | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
|  | unsigned long xfer_start = xfer_base + dev->mem_start; | 
|  |  | 
|  | if (xfer_start + count > ei_status.rmem_end) { | 
|  | /* We must wrap the input move. */ | 
|  | int semi_count = ei_status.rmem_end - xfer_start; | 
|  | memcpy_fromio(skb->data, | 
|  | (void __iomem *)dev->mem_start + xfer_base, | 
|  | semi_count); | 
|  | count -= semi_count; | 
|  | memcpy_fromio(skb->data + semi_count, | 
|  | (void __iomem *)ei_status.rmem_start, count); | 
|  | } else { | 
|  | memcpy_fromio(skb->data, | 
|  | (void __iomem *)dev->mem_start + xfer_base, | 
|  | count); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void sane_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, int start_page) | 
|  | { | 
|  | long shmem = (start_page - WD_START_PG)<<8; | 
|  |  | 
|  | memcpy_toio((void __iomem *)dev->mem_start + shmem, buf, count); | 
|  | } | 
|  |  | 
|  | /* dayna block input/output */ | 
|  | static void dayna_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, int ring_page) | 
|  | { | 
|  | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
|  |  | 
|  | dayna_memcpy_fromcard(dev, hdr, hdr_start, 4); | 
|  | /* Fix endianness */ | 
|  | hdr->count = (hdr->count & 0xFF) << 8 | (hdr->count >> 8); | 
|  | } | 
|  |  | 
|  | static void dayna_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset) | 
|  | { | 
|  | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
|  | unsigned long xfer_start = xfer_base+dev->mem_start; | 
|  |  | 
|  | /* Note the offset math is done in card memory space which is word | 
|  | per long onto our space. */ | 
|  |  | 
|  | if (xfer_start + count > ei_status.rmem_end) { | 
|  | /* We must wrap the input move. */ | 
|  | int semi_count = ei_status.rmem_end - xfer_start; | 
|  | dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count); | 
|  | count -= semi_count; | 
|  | dayna_memcpy_fromcard(dev, skb->data + semi_count, | 
|  | ei_status.rmem_start - dev->mem_start, | 
|  | count); | 
|  | } else { | 
|  | dayna_memcpy_fromcard(dev, skb->data, xfer_base, count); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void dayna_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, | 
|  | int start_page) | 
|  | { | 
|  | long shmem = (start_page - WD_START_PG)<<8; | 
|  |  | 
|  | dayna_memcpy_tocard(dev, shmem, buf, count); | 
|  | } | 
|  |  | 
|  | /* Cabletron block I/O */ | 
|  | static void slow_sane_get_8390_hdr(struct net_device *dev, | 
|  | struct e8390_pkt_hdr *hdr, | 
|  | int ring_page) | 
|  | { | 
|  | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; | 
|  | word_memcpy_fromcard(hdr, dev->mem_start + hdr_start, 4); | 
|  | /* Register endianism - fix here rather than 8390.c */ | 
|  | hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8); | 
|  | } | 
|  |  | 
|  | static void slow_sane_block_input(struct net_device *dev, int count, | 
|  | struct sk_buff *skb, int ring_offset) | 
|  | { | 
|  | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); | 
|  | unsigned long xfer_start = xfer_base+dev->mem_start; | 
|  |  | 
|  | if (xfer_start + count > ei_status.rmem_end) { | 
|  | /* We must wrap the input move. */ | 
|  | int semi_count = ei_status.rmem_end - xfer_start; | 
|  | word_memcpy_fromcard(skb->data, dev->mem_start + xfer_base, | 
|  | semi_count); | 
|  | count -= semi_count; | 
|  | word_memcpy_fromcard(skb->data + semi_count, | 
|  | ei_status.rmem_start, count); | 
|  | } else { | 
|  | word_memcpy_fromcard(skb->data, dev->mem_start + xfer_base, | 
|  | count); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void slow_sane_block_output(struct net_device *dev, int count, | 
|  | const unsigned char *buf, int start_page) | 
|  | { | 
|  | long shmem = (start_page - WD_START_PG)<<8; | 
|  |  | 
|  | word_memcpy_tocard(dev->mem_start + shmem, buf, count); | 
|  | } | 
|  |  | 
|  | static void word_memcpy_tocard(unsigned long tp, const void *fp, int count) | 
|  | { | 
|  | volatile unsigned short *to = (void *)tp; | 
|  | const unsigned short *from = fp; | 
|  |  | 
|  | count++; | 
|  | count /= 2; | 
|  |  | 
|  | while (count--) | 
|  | *to++ = *from++; | 
|  | } | 
|  |  | 
|  | static void word_memcpy_fromcard(void *tp, unsigned long fp, int count) | 
|  | { | 
|  | unsigned short *to = tp; | 
|  | const volatile unsigned short *from = (const void *)fp; | 
|  |  | 
|  | count++; | 
|  | count /= 2; | 
|  |  | 
|  | while (count--) | 
|  | *to++ = *from++; | 
|  | } | 
|  |  | 
|  |  |