| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause | |
| /* | |
| * Copyright (c) Meta Platforms, Inc. and affiliates. | |
| * All rights reserved. | |
| * | |
| * This source code is licensed under both the BSD-style license (found in the | |
| * LICENSE file in the root directory of this source tree) and the GPLv2 (found | |
| * in the COPYING file in the root directory of this source tree). | |
| * You may select, at your option, one of the above-listed licenses. | |
| */ | |
| #include "zstd_compress_internal.h" | |
| #include "hist.h" | |
| #include "zstd_opt.h" | |
| #if !defined(ZSTD_EXCLUDE_BTLAZY2_BLOCK_COMPRESSOR) \ | |
| || !defined(ZSTD_EXCLUDE_BTOPT_BLOCK_COMPRESSOR) \ | |
| || !defined(ZSTD_EXCLUDE_BTULTRA_BLOCK_COMPRESSOR) | |
| #define ZSTD_LITFREQ_ADD 2 /* scaling factor for litFreq, so that frequencies adapt faster to new stats */ | |
| #define ZSTD_MAX_PRICE (1<<30) | |
| #define ZSTD_PREDEF_THRESHOLD 8 /* if srcSize < ZSTD_PREDEF_THRESHOLD, symbols' cost is assumed static, directly determined by pre-defined distributions */ | |
| /*-************************************* | |
| * Price functions for optimal parser | |
| ***************************************/ | |
| #if 0 /* approximation at bit level (for tests) */ | |
| # define BITCOST_ACCURACY 0 | |
| # define BITCOST_MULTIPLIER (1 << BITCOST_ACCURACY) | |
| # define WEIGHT(stat, opt) ((void)(opt), ZSTD_bitWeight(stat)) | |
| #elif 0 /* fractional bit accuracy (for tests) */ | |
| # define BITCOST_ACCURACY 8 | |
| # define BITCOST_MULTIPLIER (1 << BITCOST_ACCURACY) | |
| # define WEIGHT(stat,opt) ((void)(opt), ZSTD_fracWeight(stat)) | |
| #else /* opt==approx, ultra==accurate */ | |
| # define BITCOST_ACCURACY 8 | |
| # define BITCOST_MULTIPLIER (1 << BITCOST_ACCURACY) | |
| # define WEIGHT(stat,opt) ((opt) ? ZSTD_fracWeight(stat) : ZSTD_bitWeight(stat)) | |
| #endif | |
| /* ZSTD_bitWeight() : | |
| * provide estimated "cost" of a stat in full bits only */ | |
| MEM_STATIC U32 ZSTD_bitWeight(U32 stat) | |
| { | |
| return (ZSTD_highbit32(stat+1) * BITCOST_MULTIPLIER); | |
| } | |
| /* ZSTD_fracWeight() : | |
| * provide fractional-bit "cost" of a stat, | |
| * using linear interpolation approximation */ | |
| MEM_STATIC U32 ZSTD_fracWeight(U32 rawStat) | |
| { | |
| U32 const stat = rawStat + 1; | |
| U32 const hb = ZSTD_highbit32(stat); | |
| U32 const BWeight = hb * BITCOST_MULTIPLIER; | |
| /* Fweight was meant for "Fractional weight" | |
| * but it's effectively a value between 1 and 2 | |
| * using fixed point arithmetic */ | |
| U32 const FWeight = (stat << BITCOST_ACCURACY) >> hb; | |
| U32 const weight = BWeight + FWeight; | |
| assert(hb + BITCOST_ACCURACY < 31); | |
| return weight; | |
| } | |
| #if (DEBUGLEVEL>=2) | |
| /* debugging function, | |
| * @return price in bytes as fractional value | |
| * for debug messages only */ | |
| MEM_STATIC double ZSTD_fCost(int price) | |
| { | |
| return (double)price / (BITCOST_MULTIPLIER*8); | |
| } | |
| #endif | |
| static int ZSTD_compressedLiterals(optState_t const* const optPtr) | |
| { | |
| return optPtr->literalCompressionMode != ZSTD_ps_disable; | |
| } | |
| static void ZSTD_setBasePrices(optState_t* optPtr, int optLevel) | |
| { | |
| if (ZSTD_compressedLiterals(optPtr)) | |
| optPtr->litSumBasePrice = WEIGHT(optPtr->litSum, optLevel); | |
| optPtr->litLengthSumBasePrice = WEIGHT(optPtr->litLengthSum, optLevel); | |
| optPtr->matchLengthSumBasePrice = WEIGHT(optPtr->matchLengthSum, optLevel); | |
| optPtr->offCodeSumBasePrice = WEIGHT(optPtr->offCodeSum, optLevel); | |
| } | |
| static U32 sum_u32(const unsigned table[], size_t nbElts) | |
| { | |
| size_t n; | |
| U32 total = 0; | |
| for (n=0; n<nbElts; n++) { | |
| total += table[n]; | |
| } | |
| return total; | |
| } | |
| typedef enum { base_0possible=0, base_1guaranteed=1 } base_directive_e; | |
| static U32 | |
| ZSTD_downscaleStats(unsigned* table, U32 lastEltIndex, U32 shift, base_directive_e base1) | |
| { | |
| U32 s, sum=0; | |
| DEBUGLOG(5, "ZSTD_downscaleStats (nbElts=%u, shift=%u)", | |
| (unsigned)lastEltIndex+1, (unsigned)shift ); | |
| assert(shift < 30); | |
| for (s=0; s<lastEltIndex+1; s++) { | |
| unsigned const base = base1 ? 1 : (table[s]>0); | |
| unsigned const newStat = base + (table[s] >> shift); | |
| sum += newStat; | |
| table[s] = newStat; | |
| } | |
| return sum; | |
| } | |
| /* ZSTD_scaleStats() : | |
| * reduce all elt frequencies in table if sum too large | |
| * return the resulting sum of elements */ | |
| static U32 ZSTD_scaleStats(unsigned* table, U32 lastEltIndex, U32 logTarget) | |
| { | |
| U32 const prevsum = sum_u32(table, lastEltIndex+1); | |
| U32 const factor = prevsum >> logTarget; | |
| DEBUGLOG(5, "ZSTD_scaleStats (nbElts=%u, target=%u)", (unsigned)lastEltIndex+1, (unsigned)logTarget); | |
| assert(logTarget < 30); | |
| if (factor <= 1) return prevsum; | |
| return ZSTD_downscaleStats(table, lastEltIndex, ZSTD_highbit32(factor), base_1guaranteed); | |
| } | |
| /* ZSTD_rescaleFreqs() : | |
| * if first block (detected by optPtr->litLengthSum == 0) : init statistics | |
| * take hints from dictionary if there is one | |
| * and init from zero if there is none, | |
| * using src for literals stats, and baseline stats for sequence symbols | |
| * otherwise downscale existing stats, to be used as seed for next block. | |
| */ | |
| static void | |
| ZSTD_rescaleFreqs(optState_t* const optPtr, | |
| const BYTE* const src, size_t const srcSize, | |
| int const optLevel) | |
| { | |
| int const compressedLiterals = ZSTD_compressedLiterals(optPtr); | |
| DEBUGLOG(5, "ZSTD_rescaleFreqs (srcSize=%u)", (unsigned)srcSize); | |
| optPtr->priceType = zop_dynamic; | |
| if (optPtr->litLengthSum == 0) { /* no literals stats collected -> first block assumed -> init */ | |
| /* heuristic: use pre-defined stats for too small inputs */ | |
| if (srcSize <= ZSTD_PREDEF_THRESHOLD) { | |
| DEBUGLOG(5, "srcSize <= %i : use predefined stats", ZSTD_PREDEF_THRESHOLD); | |
| optPtr->priceType = zop_predef; | |
| } | |
| assert(optPtr->symbolCosts != NULL); | |
| if (optPtr->symbolCosts->huf.repeatMode == HUF_repeat_valid) { | |
| /* huffman stats covering the full value set : table presumed generated by dictionary */ | |
| optPtr->priceType = zop_dynamic; | |
| if (compressedLiterals) { | |
| /* generate literals statistics from huffman table */ | |
| unsigned lit; | |
| assert(optPtr->litFreq != NULL); | |
| optPtr->litSum = 0; | |
| for (lit=0; lit<=MaxLit; lit++) { | |
| U32 const scaleLog = 11; /* scale to 2K */ | |
| U32 const bitCost = HUF_getNbBitsFromCTable(optPtr->symbolCosts->huf.CTable, lit); | |
| assert(bitCost <= scaleLog); | |
| optPtr->litFreq[lit] = bitCost ? 1 << (scaleLog-bitCost) : 1 /*minimum to calculate cost*/; | |
| optPtr->litSum += optPtr->litFreq[lit]; | |
| } } | |
| { unsigned ll; | |
| FSE_CState_t llstate; | |
| FSE_initCState(&llstate, optPtr->symbolCosts->fse.litlengthCTable); | |
| optPtr->litLengthSum = 0; | |
| for (ll=0; ll<=MaxLL; ll++) { | |
| U32 const scaleLog = 10; /* scale to 1K */ | |
| U32 const bitCost = FSE_getMaxNbBits(llstate.symbolTT, ll); | |
| assert(bitCost < scaleLog); | |
| optPtr->litLengthFreq[ll] = bitCost ? 1 << (scaleLog-bitCost) : 1 /*minimum to calculate cost*/; | |
| optPtr->litLengthSum += optPtr->litLengthFreq[ll]; | |
| } } | |
| { unsigned ml; | |
| FSE_CState_t mlstate; | |
| FSE_initCState(&mlstate, optPtr->symbolCosts->fse.matchlengthCTable); | |
| optPtr->matchLengthSum = 0; | |
| for (ml=0; ml<=MaxML; ml++) { | |
| U32 const scaleLog = 10; | |
| U32 const bitCost = FSE_getMaxNbBits(mlstate.symbolTT, ml); | |
| assert(bitCost < scaleLog); | |
| optPtr->matchLengthFreq[ml] = bitCost ? 1 << (scaleLog-bitCost) : 1 /*minimum to calculate cost*/; | |
| optPtr->matchLengthSum += optPtr->matchLengthFreq[ml]; | |
| } } | |
| { unsigned of; | |
| FSE_CState_t ofstate; | |
| FSE_initCState(&ofstate, optPtr->symbolCosts->fse.offcodeCTable); | |
| optPtr->offCodeSum = 0; | |
| for (of=0; of<=MaxOff; of++) { | |
| U32 const scaleLog = 10; | |
| U32 const bitCost = FSE_getMaxNbBits(ofstate.symbolTT, of); | |
| assert(bitCost < scaleLog); | |
| optPtr->offCodeFreq[of] = bitCost ? 1 << (scaleLog-bitCost) : 1 /*minimum to calculate cost*/; | |
| optPtr->offCodeSum += optPtr->offCodeFreq[of]; | |
| } } | |
| } else { /* first block, no dictionary */ | |
| assert(optPtr->litFreq != NULL); | |
| if (compressedLiterals) { | |
| /* base initial cost of literals on direct frequency within src */ | |
| unsigned lit = MaxLit; | |
| HIST_count_simple(optPtr->litFreq, &lit, src, srcSize); /* use raw first block to init statistics */ | |
| optPtr->litSum = ZSTD_downscaleStats(optPtr->litFreq, MaxLit, 8, base_0possible); | |
| } | |
| { unsigned const baseLLfreqs[MaxLL+1] = { | |
| 4, 2, 1, 1, 1, 1, 1, 1, | |
| 1, 1, 1, 1, 1, 1, 1, 1, | |
| 1, 1, 1, 1, 1, 1, 1, 1, | |
| 1, 1, 1, 1, 1, 1, 1, 1, | |
| 1, 1, 1, 1 | |
| }; | |
| ZSTD_memcpy(optPtr->litLengthFreq, baseLLfreqs, sizeof(baseLLfreqs)); | |
| optPtr->litLengthSum = sum_u32(baseLLfreqs, MaxLL+1); | |
| } | |
| { unsigned ml; | |
| for (ml=0; ml<=MaxML; ml++) | |
| optPtr->matchLengthFreq[ml] = 1; | |
| } | |
| optPtr->matchLengthSum = MaxML+1; | |
| { unsigned const baseOFCfreqs[MaxOff+1] = { | |
| 6, 2, 1, 1, 2, 3, 4, 4, | |
| 4, 3, 2, 1, 1, 1, 1, 1, | |
| 1, 1, 1, 1, 1, 1, 1, 1, | |
| 1, 1, 1, 1, 1, 1, 1, 1 | |
| }; | |
| ZSTD_memcpy(optPtr->offCodeFreq, baseOFCfreqs, sizeof(baseOFCfreqs)); | |
| optPtr->offCodeSum = sum_u32(baseOFCfreqs, MaxOff+1); | |
| } | |
| } | |
| } else { /* new block : scale down accumulated statistics */ | |
| if (compressedLiterals) | |
| optPtr->litSum = ZSTD_scaleStats(optPtr->litFreq, MaxLit, 12); | |
| optPtr->litLengthSum = ZSTD_scaleStats(optPtr->litLengthFreq, MaxLL, 11); | |
| optPtr->matchLengthSum = ZSTD_scaleStats(optPtr->matchLengthFreq, MaxML, 11); | |
| optPtr->offCodeSum = ZSTD_scaleStats(optPtr->offCodeFreq, MaxOff, 11); | |
| } | |
| ZSTD_setBasePrices(optPtr, optLevel); | |
| } | |
| /* ZSTD_rawLiteralsCost() : | |
| * price of literals (only) in specified segment (which length can be 0). | |
| * does not include price of literalLength symbol */ | |
| static U32 ZSTD_rawLiteralsCost(const BYTE* const literals, U32 const litLength, | |
| const optState_t* const optPtr, | |
| int optLevel) | |
| { | |
| DEBUGLOG(8, "ZSTD_rawLiteralsCost (%u literals)", litLength); | |
| if (litLength == 0) return 0; | |
| if (!ZSTD_compressedLiterals(optPtr)) | |
| return (litLength << 3) * BITCOST_MULTIPLIER; /* Uncompressed - 8 bytes per literal. */ | |
| if (optPtr->priceType == zop_predef) | |
| return (litLength*6) * BITCOST_MULTIPLIER; /* 6 bit per literal - no statistic used */ | |
| /* dynamic statistics */ | |
| { U32 price = optPtr->litSumBasePrice * litLength; | |
| U32 const litPriceMax = optPtr->litSumBasePrice - BITCOST_MULTIPLIER; | |
| U32 u; | |
| assert(optPtr->litSumBasePrice >= BITCOST_MULTIPLIER); | |
| for (u=0; u < litLength; u++) { | |
| U32 litPrice = WEIGHT(optPtr->litFreq[literals[u]], optLevel); | |
| if (UNLIKELY(litPrice > litPriceMax)) litPrice = litPriceMax; | |
| price -= litPrice; | |
| } | |
| return price; | |
| } | |
| } | |
| /* ZSTD_litLengthPrice() : | |
| * cost of literalLength symbol */ | |
| static U32 ZSTD_litLengthPrice(U32 const litLength, const optState_t* const optPtr, int optLevel) | |
| { | |
| assert(litLength <= ZSTD_BLOCKSIZE_MAX); | |
| if (optPtr->priceType == zop_predef) | |
| return WEIGHT(litLength, optLevel); | |
| /* ZSTD_LLcode() can't compute litLength price for sizes >= ZSTD_BLOCKSIZE_MAX | |
| * because it isn't representable in the zstd format. | |
| * So instead just pretend it would cost 1 bit more than ZSTD_BLOCKSIZE_MAX - 1. | |
| * In such a case, the block would be all literals. | |
| */ | |
| if (litLength == ZSTD_BLOCKSIZE_MAX) | |
| return BITCOST_MULTIPLIER + ZSTD_litLengthPrice(ZSTD_BLOCKSIZE_MAX - 1, optPtr, optLevel); | |
| /* dynamic statistics */ | |
| { U32 const llCode = ZSTD_LLcode(litLength); | |
| return (LL_bits[llCode] * BITCOST_MULTIPLIER) | |
| + optPtr->litLengthSumBasePrice | |
| - WEIGHT(optPtr->litLengthFreq[llCode], optLevel); | |
| } | |
| } | |
| /* ZSTD_getMatchPrice() : | |
| * Provides the cost of the match part (offset + matchLength) of a sequence. | |
| * Must be combined with ZSTD_fullLiteralsCost() to get the full cost of a sequence. | |
| * @offBase : sumtype, representing an offset or a repcode, and using numeric representation of ZSTD_storeSeq() | |
| * @optLevel: when <2, favors small offset for decompression speed (improved cache efficiency) | |
| */ | |
| FORCE_INLINE_TEMPLATE U32 | |
| ZSTD_getMatchPrice(U32 const offBase, | |
| U32 const matchLength, | |
| const optState_t* const optPtr, | |
| int const optLevel) | |
| { | |
| U32 price; | |
| U32 const offCode = ZSTD_highbit32(offBase); | |
| U32 const mlBase = matchLength - MINMATCH; | |
| assert(matchLength >= MINMATCH); | |
| if (optPtr->priceType == zop_predef) /* fixed scheme, does not use statistics */ | |
| return WEIGHT(mlBase, optLevel) | |
| + ((16 + offCode) * BITCOST_MULTIPLIER); /* emulated offset cost */ | |
| /* dynamic statistics */ | |
| price = (offCode * BITCOST_MULTIPLIER) + (optPtr->offCodeSumBasePrice - WEIGHT(optPtr->offCodeFreq[offCode], optLevel)); | |
| if ((optLevel<2) /*static*/ && offCode >= 20) | |
| price += (offCode-19)*2 * BITCOST_MULTIPLIER; /* handicap for long distance offsets, favor decompression speed */ | |
| /* match Length */ | |
| { U32 const mlCode = ZSTD_MLcode(mlBase); | |
| price += (ML_bits[mlCode] * BITCOST_MULTIPLIER) + (optPtr->matchLengthSumBasePrice - WEIGHT(optPtr->matchLengthFreq[mlCode], optLevel)); | |
| } | |
| price += BITCOST_MULTIPLIER / 5; /* heuristic : make matches a bit more costly to favor less sequences -> faster decompression speed */ | |
| DEBUGLOG(8, "ZSTD_getMatchPrice(ml:%u) = %u", matchLength, price); | |
| return price; | |
| } | |
| /* ZSTD_updateStats() : | |
| * assumption : literals + litLength <= iend */ | |
| static void ZSTD_updateStats(optState_t* const optPtr, | |
| U32 litLength, const BYTE* literals, | |
| U32 offBase, U32 matchLength) | |
| { | |
| /* literals */ | |
| if (ZSTD_compressedLiterals(optPtr)) { | |
| U32 u; | |
| for (u=0; u < litLength; u++) | |
| optPtr->litFreq[literals[u]] += ZSTD_LITFREQ_ADD; | |
| optPtr->litSum += litLength*ZSTD_LITFREQ_ADD; | |
| } | |
| /* literal Length */ | |
| { U32 const llCode = ZSTD_LLcode(litLength); | |
| optPtr->litLengthFreq[llCode]++; | |
| optPtr->litLengthSum++; | |
| } | |
| /* offset code : follows storeSeq() numeric representation */ | |
| { U32 const offCode = ZSTD_highbit32(offBase); | |
| assert(offCode <= MaxOff); | |
| optPtr->offCodeFreq[offCode]++; | |
| optPtr->offCodeSum++; | |
| } | |
| /* match Length */ | |
| { U32 const mlBase = matchLength - MINMATCH; | |
| U32 const mlCode = ZSTD_MLcode(mlBase); | |
| optPtr->matchLengthFreq[mlCode]++; | |
| optPtr->matchLengthSum++; | |
| } | |
| } | |
| /* ZSTD_readMINMATCH() : | |
| * function safe only for comparisons | |
| * assumption : memPtr must be at least 4 bytes before end of buffer */ | |
| MEM_STATIC U32 ZSTD_readMINMATCH(const void* memPtr, U32 length) | |
| { | |
| switch (length) | |
| { | |
| default : | |
| case 4 : return MEM_read32(memPtr); | |
| case 3 : if (MEM_isLittleEndian()) | |
| return MEM_read32(memPtr)<<8; | |
| else | |
| return MEM_read32(memPtr)>>8; | |
| } | |
| } | |
| /* Update hashTable3 up to ip (excluded) | |
| Assumption : always within prefix (i.e. not within extDict) */ | |
| static | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| U32 ZSTD_insertAndFindFirstIndexHash3 (const ZSTD_MatchState_t* ms, | |
| U32* nextToUpdate3, | |
| const BYTE* const ip) | |
| { | |
| U32* const hashTable3 = ms->hashTable3; | |
| U32 const hashLog3 = ms->hashLog3; | |
| const BYTE* const base = ms->window.base; | |
| U32 idx = *nextToUpdate3; | |
| U32 const target = (U32)(ip - base); | |
| size_t const hash3 = ZSTD_hash3Ptr(ip, hashLog3); | |
| assert(hashLog3 > 0); | |
| while(idx < target) { | |
| hashTable3[ZSTD_hash3Ptr(base+idx, hashLog3)] = idx; | |
| idx++; | |
| } | |
| *nextToUpdate3 = target; | |
| return hashTable3[hash3]; | |
| } | |
| /*-************************************* | |
| * Binary Tree search | |
| ***************************************/ | |
| /* ZSTD_insertBt1() : add one or multiple positions to tree. | |
| * @param ip assumed <= iend-8 . | |
| * @param target The target of ZSTD_updateTree_internal() - we are filling to this position | |
| * @return : nb of positions added */ | |
| static | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| U32 ZSTD_insertBt1( | |
| const ZSTD_MatchState_t* ms, | |
| const BYTE* const ip, const BYTE* const iend, | |
| U32 const target, | |
| U32 const mls, const int extDict) | |
| { | |
| const ZSTD_compressionParameters* const cParams = &ms->cParams; | |
| U32* const hashTable = ms->hashTable; | |
| U32 const hashLog = cParams->hashLog; | |
| size_t const h = ZSTD_hashPtr(ip, hashLog, mls); | |
| U32* const bt = ms->chainTable; | |
| U32 const btLog = cParams->chainLog - 1; | |
| U32 const btMask = (1 << btLog) - 1; | |
| U32 matchIndex = hashTable[h]; | |
| size_t commonLengthSmaller=0, commonLengthLarger=0; | |
| const BYTE* const base = ms->window.base; | |
| const BYTE* const dictBase = ms->window.dictBase; | |
| const U32 dictLimit = ms->window.dictLimit; | |
| const BYTE* const dictEnd = dictBase + dictLimit; | |
| const BYTE* const prefixStart = base + dictLimit; | |
| const BYTE* match; | |
| const U32 curr = (U32)(ip-base); | |
| const U32 btLow = btMask >= curr ? 0 : curr - btMask; | |
| U32* smallerPtr = bt + 2*(curr&btMask); | |
| U32* largerPtr = smallerPtr + 1; | |
| U32 dummy32; /* to be nullified at the end */ | |
| /* windowLow is based on target because | |
| * we only need positions that will be in the window at the end of the tree update. | |
| */ | |
| U32 const windowLow = ZSTD_getLowestMatchIndex(ms, target, cParams->windowLog); | |
| U32 matchEndIdx = curr+8+1; | |
| size_t bestLength = 8; | |
| U32 nbCompares = 1U << cParams->searchLog; | |
| #ifdef ZSTD_C_PREDICT | |
| U32 predictedSmall = *(bt + 2*((curr-1)&btMask) + 0); | |
| U32 predictedLarge = *(bt + 2*((curr-1)&btMask) + 1); | |
| predictedSmall += (predictedSmall>0); | |
| predictedLarge += (predictedLarge>0); | |
| #endif /* ZSTD_C_PREDICT */ | |
| DEBUGLOG(8, "ZSTD_insertBt1 (%u)", curr); | |
| assert(curr <= target); | |
| assert(ip <= iend-8); /* required for h calculation */ | |
| hashTable[h] = curr; /* Update Hash Table */ | |
| assert(windowLow > 0); | |
| for (; nbCompares && (matchIndex >= windowLow); --nbCompares) { | |
| U32* const nextPtr = bt + 2*(matchIndex & btMask); | |
| size_t matchLength = MIN(commonLengthSmaller, commonLengthLarger); /* guaranteed minimum nb of common bytes */ | |
| assert(matchIndex < curr); | |
| #ifdef ZSTD_C_PREDICT /* note : can create issues when hlog small <= 11 */ | |
| const U32* predictPtr = bt + 2*((matchIndex-1) & btMask); /* written this way, as bt is a roll buffer */ | |
| if (matchIndex == predictedSmall) { | |
| /* no need to check length, result known */ | |
| *smallerPtr = matchIndex; | |
| if (matchIndex <= btLow) { smallerPtr=&dummy32; break; } /* beyond tree size, stop the search */ | |
| smallerPtr = nextPtr+1; /* new "smaller" => larger of match */ | |
| matchIndex = nextPtr[1]; /* new matchIndex larger than previous (closer to current) */ | |
| predictedSmall = predictPtr[1] + (predictPtr[1]>0); | |
| continue; | |
| } | |
| if (matchIndex == predictedLarge) { | |
| *largerPtr = matchIndex; | |
| if (matchIndex <= btLow) { largerPtr=&dummy32; break; } /* beyond tree size, stop the search */ | |
| largerPtr = nextPtr; | |
| matchIndex = nextPtr[0]; | |
| predictedLarge = predictPtr[0] + (predictPtr[0]>0); | |
| continue; | |
| } | |
| #endif | |
| if (!extDict || (matchIndex+matchLength >= dictLimit)) { | |
| assert(matchIndex+matchLength >= dictLimit); /* might be wrong if actually extDict */ | |
| match = base + matchIndex; | |
| matchLength += ZSTD_count(ip+matchLength, match+matchLength, iend); | |
| } else { | |
| match = dictBase + matchIndex; | |
| matchLength += ZSTD_count_2segments(ip+matchLength, match+matchLength, iend, dictEnd, prefixStart); | |
| if (matchIndex+matchLength >= dictLimit) | |
| match = base + matchIndex; /* to prepare for next usage of match[matchLength] */ | |
| } | |
| if (matchLength > bestLength) { | |
| bestLength = matchLength; | |
| if (matchLength > matchEndIdx - matchIndex) | |
| matchEndIdx = matchIndex + (U32)matchLength; | |
| } | |
| if (ip+matchLength == iend) { /* equal : no way to know if inf or sup */ | |
| break; /* drop , to guarantee consistency ; miss a bit of compression, but other solutions can corrupt tree */ | |
| } | |
| if (match[matchLength] < ip[matchLength]) { /* necessarily within buffer */ | |
| /* match is smaller than current */ | |
| *smallerPtr = matchIndex; /* update smaller idx */ | |
| commonLengthSmaller = matchLength; /* all smaller will now have at least this guaranteed common length */ | |
| if (matchIndex <= btLow) { smallerPtr=&dummy32; break; } /* beyond tree size, stop searching */ | |
| smallerPtr = nextPtr+1; /* new "candidate" => larger than match, which was smaller than target */ | |
| matchIndex = nextPtr[1]; /* new matchIndex, larger than previous and closer to current */ | |
| } else { | |
| /* match is larger than current */ | |
| *largerPtr = matchIndex; | |
| commonLengthLarger = matchLength; | |
| if (matchIndex <= btLow) { largerPtr=&dummy32; break; } /* beyond tree size, stop searching */ | |
| largerPtr = nextPtr; | |
| matchIndex = nextPtr[0]; | |
| } } | |
| *smallerPtr = *largerPtr = 0; | |
| { U32 positions = 0; | |
| if (bestLength > 384) positions = MIN(192, (U32)(bestLength - 384)); /* speed optimization */ | |
| assert(matchEndIdx > curr + 8); | |
| return MAX(positions, matchEndIdx - (curr + 8)); | |
| } | |
| } | |
| FORCE_INLINE_TEMPLATE | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| void ZSTD_updateTree_internal( | |
| ZSTD_MatchState_t* ms, | |
| const BYTE* const ip, const BYTE* const iend, | |
| const U32 mls, const ZSTD_dictMode_e dictMode) | |
| { | |
| const BYTE* const base = ms->window.base; | |
| U32 const target = (U32)(ip - base); | |
| U32 idx = ms->nextToUpdate; | |
| DEBUGLOG(7, "ZSTD_updateTree_internal, from %u to %u (dictMode:%u)", | |
| idx, target, dictMode); | |
| while(idx < target) { | |
| U32 const forward = ZSTD_insertBt1(ms, base+idx, iend, target, mls, dictMode == ZSTD_extDict); | |
| assert(idx < (U32)(idx + forward)); | |
| idx += forward; | |
| } | |
| assert((size_t)(ip - base) <= (size_t)(U32)(-1)); | |
| assert((size_t)(iend - base) <= (size_t)(U32)(-1)); | |
| ms->nextToUpdate = target; | |
| } | |
| void ZSTD_updateTree(ZSTD_MatchState_t* ms, const BYTE* ip, const BYTE* iend) { | |
| ZSTD_updateTree_internal(ms, ip, iend, ms->cParams.minMatch, ZSTD_noDict); | |
| } | |
| FORCE_INLINE_TEMPLATE | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| U32 | |
| ZSTD_insertBtAndGetAllMatches ( | |
| ZSTD_match_t* matches, /* store result (found matches) in this table (presumed large enough) */ | |
| ZSTD_MatchState_t* ms, | |
| U32* nextToUpdate3, | |
| const BYTE* const ip, const BYTE* const iLimit, | |
| const ZSTD_dictMode_e dictMode, | |
| const U32 rep[ZSTD_REP_NUM], | |
| const U32 ll0, /* tells if associated literal length is 0 or not. This value must be 0 or 1 */ | |
| const U32 lengthToBeat, | |
| const U32 mls /* template */) | |
| { | |
| const ZSTD_compressionParameters* const cParams = &ms->cParams; | |
| U32 const sufficient_len = MIN(cParams->targetLength, ZSTD_OPT_NUM -1); | |
| const BYTE* const base = ms->window.base; | |
| U32 const curr = (U32)(ip-base); | |
| U32 const hashLog = cParams->hashLog; | |
| U32 const minMatch = (mls==3) ? 3 : 4; | |
| U32* const hashTable = ms->hashTable; | |
| size_t const h = ZSTD_hashPtr(ip, hashLog, mls); | |
| U32 matchIndex = hashTable[h]; | |
| U32* const bt = ms->chainTable; | |
| U32 const btLog = cParams->chainLog - 1; | |
| U32 const btMask= (1U << btLog) - 1; | |
| size_t commonLengthSmaller=0, commonLengthLarger=0; | |
| const BYTE* const dictBase = ms->window.dictBase; | |
| U32 const dictLimit = ms->window.dictLimit; | |
| const BYTE* const dictEnd = dictBase + dictLimit; | |
| const BYTE* const prefixStart = base + dictLimit; | |
| U32 const btLow = (btMask >= curr) ? 0 : curr - btMask; | |
| U32 const windowLow = ZSTD_getLowestMatchIndex(ms, curr, cParams->windowLog); | |
| U32 const matchLow = windowLow ? windowLow : 1; | |
| U32* smallerPtr = bt + 2*(curr&btMask); | |
| U32* largerPtr = bt + 2*(curr&btMask) + 1; | |
| U32 matchEndIdx = curr+8+1; /* farthest referenced position of any match => detects repetitive patterns */ | |
| U32 dummy32; /* to be nullified at the end */ | |
| U32 mnum = 0; | |
| U32 nbCompares = 1U << cParams->searchLog; | |
| const ZSTD_MatchState_t* dms = dictMode == ZSTD_dictMatchState ? ms->dictMatchState : NULL; | |
| const ZSTD_compressionParameters* const dmsCParams = | |
| dictMode == ZSTD_dictMatchState ? &dms->cParams : NULL; | |
| const BYTE* const dmsBase = dictMode == ZSTD_dictMatchState ? dms->window.base : NULL; | |
| const BYTE* const dmsEnd = dictMode == ZSTD_dictMatchState ? dms->window.nextSrc : NULL; | |
| U32 const dmsHighLimit = dictMode == ZSTD_dictMatchState ? (U32)(dmsEnd - dmsBase) : 0; | |
| U32 const dmsLowLimit = dictMode == ZSTD_dictMatchState ? dms->window.lowLimit : 0; | |
| U32 const dmsIndexDelta = dictMode == ZSTD_dictMatchState ? windowLow - dmsHighLimit : 0; | |
| U32 const dmsHashLog = dictMode == ZSTD_dictMatchState ? dmsCParams->hashLog : hashLog; | |
| U32 const dmsBtLog = dictMode == ZSTD_dictMatchState ? dmsCParams->chainLog - 1 : btLog; | |
| U32 const dmsBtMask = dictMode == ZSTD_dictMatchState ? (1U << dmsBtLog) - 1 : 0; | |
| U32 const dmsBtLow = dictMode == ZSTD_dictMatchState && dmsBtMask < dmsHighLimit - dmsLowLimit ? dmsHighLimit - dmsBtMask : dmsLowLimit; | |
| size_t bestLength = lengthToBeat-1; | |
| DEBUGLOG(8, "ZSTD_insertBtAndGetAllMatches: current=%u", curr); | |
| /* check repCode */ | |
| assert(ll0 <= 1); /* necessarily 1 or 0 */ | |
| { U32 const lastR = ZSTD_REP_NUM + ll0; | |
| U32 repCode; | |
| for (repCode = ll0; repCode < lastR; repCode++) { | |
| U32 const repOffset = (repCode==ZSTD_REP_NUM) ? (rep[0] - 1) : rep[repCode]; | |
| U32 const repIndex = curr - repOffset; | |
| U32 repLen = 0; | |
| assert(curr >= dictLimit); | |
| if (repOffset-1 /* intentional overflow, discards 0 and -1 */ < curr-dictLimit) { /* equivalent to `curr > repIndex >= dictLimit` */ | |
| /* We must validate the repcode offset because when we're using a dictionary the | |
| * valid offset range shrinks when the dictionary goes out of bounds. | |
| */ | |
| if ((repIndex >= windowLow) & (ZSTD_readMINMATCH(ip, minMatch) == ZSTD_readMINMATCH(ip - repOffset, minMatch))) { | |
| repLen = (U32)ZSTD_count(ip+minMatch, ip+minMatch-repOffset, iLimit) + minMatch; | |
| } | |
| } else { /* repIndex < dictLimit || repIndex >= curr */ | |
| const BYTE* const repMatch = dictMode == ZSTD_dictMatchState ? | |
| dmsBase + repIndex - dmsIndexDelta : | |
| dictBase + repIndex; | |
| assert(curr >= windowLow); | |
| if ( dictMode == ZSTD_extDict | |
| && ( ((repOffset-1) /*intentional overflow*/ < curr - windowLow) /* equivalent to `curr > repIndex >= windowLow` */ | |
| & (ZSTD_index_overlap_check(dictLimit, repIndex)) ) | |
| && (ZSTD_readMINMATCH(ip, minMatch) == ZSTD_readMINMATCH(repMatch, minMatch)) ) { | |
| repLen = (U32)ZSTD_count_2segments(ip+minMatch, repMatch+minMatch, iLimit, dictEnd, prefixStart) + minMatch; | |
| } | |
| if (dictMode == ZSTD_dictMatchState | |
| && ( ((repOffset-1) /*intentional overflow*/ < curr - (dmsLowLimit + dmsIndexDelta)) /* equivalent to `curr > repIndex >= dmsLowLimit` */ | |
| & (ZSTD_index_overlap_check(dictLimit, repIndex)) ) | |
| && (ZSTD_readMINMATCH(ip, minMatch) == ZSTD_readMINMATCH(repMatch, minMatch)) ) { | |
| repLen = (U32)ZSTD_count_2segments(ip+minMatch, repMatch+minMatch, iLimit, dmsEnd, prefixStart) + minMatch; | |
| } } | |
| /* save longer solution */ | |
| if (repLen > bestLength) { | |
| DEBUGLOG(8, "found repCode %u (ll0:%u, offset:%u) of length %u", | |
| repCode, ll0, repOffset, repLen); | |
| bestLength = repLen; | |
| matches[mnum].off = REPCODE_TO_OFFBASE(repCode - ll0 + 1); /* expect value between 1 and 3 */ | |
| matches[mnum].len = (U32)repLen; | |
| mnum++; | |
| if ( (repLen > sufficient_len) | |
| | (ip+repLen == iLimit) ) { /* best possible */ | |
| return mnum; | |
| } } } } | |
| /* HC3 match finder */ | |
| if ((mls == 3) /*static*/ && (bestLength < mls)) { | |
| U32 const matchIndex3 = ZSTD_insertAndFindFirstIndexHash3(ms, nextToUpdate3, ip); | |
| if ((matchIndex3 >= matchLow) | |
| & (curr - matchIndex3 < (1<<18)) /*heuristic : longer distance likely too expensive*/ ) { | |
| size_t mlen; | |
| if ((dictMode == ZSTD_noDict) /*static*/ || (dictMode == ZSTD_dictMatchState) /*static*/ || (matchIndex3 >= dictLimit)) { | |
| const BYTE* const match = base + matchIndex3; | |
| mlen = ZSTD_count(ip, match, iLimit); | |
| } else { | |
| const BYTE* const match = dictBase + matchIndex3; | |
| mlen = ZSTD_count_2segments(ip, match, iLimit, dictEnd, prefixStart); | |
| } | |
| /* save best solution */ | |
| if (mlen >= mls /* == 3 > bestLength */) { | |
| DEBUGLOG(8, "found small match with hlog3, of length %u", | |
| (U32)mlen); | |
| bestLength = mlen; | |
| assert(curr > matchIndex3); | |
| assert(mnum==0); /* no prior solution */ | |
| matches[0].off = OFFSET_TO_OFFBASE(curr - matchIndex3); | |
| matches[0].len = (U32)mlen; | |
| mnum = 1; | |
| if ( (mlen > sufficient_len) | | |
| (ip+mlen == iLimit) ) { /* best possible length */ | |
| ms->nextToUpdate = curr+1; /* skip insertion */ | |
| return 1; | |
| } } } | |
| /* no dictMatchState lookup: dicts don't have a populated HC3 table */ | |
| } /* if (mls == 3) */ | |
| hashTable[h] = curr; /* Update Hash Table */ | |
| for (; nbCompares && (matchIndex >= matchLow); --nbCompares) { | |
| U32* const nextPtr = bt + 2*(matchIndex & btMask); | |
| const BYTE* match; | |
| size_t matchLength = MIN(commonLengthSmaller, commonLengthLarger); /* guaranteed minimum nb of common bytes */ | |
| assert(curr > matchIndex); | |
| if ((dictMode == ZSTD_noDict) || (dictMode == ZSTD_dictMatchState) || (matchIndex+matchLength >= dictLimit)) { | |
| assert(matchIndex+matchLength >= dictLimit); /* ensure the condition is correct when !extDict */ | |
| match = base + matchIndex; | |
| if (matchIndex >= dictLimit) assert(memcmp(match, ip, matchLength) == 0); /* ensure early section of match is equal as expected */ | |
| matchLength += ZSTD_count(ip+matchLength, match+matchLength, iLimit); | |
| } else { | |
| match = dictBase + matchIndex; | |
| assert(memcmp(match, ip, matchLength) == 0); /* ensure early section of match is equal as expected */ | |
| matchLength += ZSTD_count_2segments(ip+matchLength, match+matchLength, iLimit, dictEnd, prefixStart); | |
| if (matchIndex+matchLength >= dictLimit) | |
| match = base + matchIndex; /* prepare for match[matchLength] read */ | |
| } | |
| if (matchLength > bestLength) { | |
| DEBUGLOG(8, "found match of length %u at distance %u (offBase=%u)", | |
| (U32)matchLength, curr - matchIndex, OFFSET_TO_OFFBASE(curr - matchIndex)); | |
| assert(matchEndIdx > matchIndex); | |
| if (matchLength > matchEndIdx - matchIndex) | |
| matchEndIdx = matchIndex + (U32)matchLength; | |
| bestLength = matchLength; | |
| matches[mnum].off = OFFSET_TO_OFFBASE(curr - matchIndex); | |
| matches[mnum].len = (U32)matchLength; | |
| mnum++; | |
| if ( (matchLength > ZSTD_OPT_NUM) | |
| | (ip+matchLength == iLimit) /* equal : no way to know if inf or sup */) { | |
| if (dictMode == ZSTD_dictMatchState) nbCompares = 0; /* break should also skip searching dms */ | |
| break; /* drop, to preserve bt consistency (miss a little bit of compression) */ | |
| } } | |
| if (match[matchLength] < ip[matchLength]) { | |
| /* match smaller than current */ | |
| *smallerPtr = matchIndex; /* update smaller idx */ | |
| commonLengthSmaller = matchLength; /* all smaller will now have at least this guaranteed common length */ | |
| if (matchIndex <= btLow) { smallerPtr=&dummy32; break; } /* beyond tree size, stop the search */ | |
| smallerPtr = nextPtr+1; /* new candidate => larger than match, which was smaller than current */ | |
| matchIndex = nextPtr[1]; /* new matchIndex, larger than previous, closer to current */ | |
| } else { | |
| *largerPtr = matchIndex; | |
| commonLengthLarger = matchLength; | |
| if (matchIndex <= btLow) { largerPtr=&dummy32; break; } /* beyond tree size, stop the search */ | |
| largerPtr = nextPtr; | |
| matchIndex = nextPtr[0]; | |
| } } | |
| *smallerPtr = *largerPtr = 0; | |
| assert(nbCompares <= (1U << ZSTD_SEARCHLOG_MAX)); /* Check we haven't underflowed. */ | |
| if (dictMode == ZSTD_dictMatchState && nbCompares) { | |
| size_t const dmsH = ZSTD_hashPtr(ip, dmsHashLog, mls); | |
| U32 dictMatchIndex = dms->hashTable[dmsH]; | |
| const U32* const dmsBt = dms->chainTable; | |
| commonLengthSmaller = commonLengthLarger = 0; | |
| for (; nbCompares && (dictMatchIndex > dmsLowLimit); --nbCompares) { | |
| const U32* const nextPtr = dmsBt + 2*(dictMatchIndex & dmsBtMask); | |
| size_t matchLength = MIN(commonLengthSmaller, commonLengthLarger); /* guaranteed minimum nb of common bytes */ | |
| const BYTE* match = dmsBase + dictMatchIndex; | |
| matchLength += ZSTD_count_2segments(ip+matchLength, match+matchLength, iLimit, dmsEnd, prefixStart); | |
| if (dictMatchIndex+matchLength >= dmsHighLimit) | |
| match = base + dictMatchIndex + dmsIndexDelta; /* to prepare for next usage of match[matchLength] */ | |
| if (matchLength > bestLength) { | |
| matchIndex = dictMatchIndex + dmsIndexDelta; | |
| DEBUGLOG(8, "found dms match of length %u at distance %u (offBase=%u)", | |
| (U32)matchLength, curr - matchIndex, OFFSET_TO_OFFBASE(curr - matchIndex)); | |
| if (matchLength > matchEndIdx - matchIndex) | |
| matchEndIdx = matchIndex + (U32)matchLength; | |
| bestLength = matchLength; | |
| matches[mnum].off = OFFSET_TO_OFFBASE(curr - matchIndex); | |
| matches[mnum].len = (U32)matchLength; | |
| mnum++; | |
| if ( (matchLength > ZSTD_OPT_NUM) | |
| | (ip+matchLength == iLimit) /* equal : no way to know if inf or sup */) { | |
| break; /* drop, to guarantee consistency (miss a little bit of compression) */ | |
| } } | |
| if (dictMatchIndex <= dmsBtLow) { break; } /* beyond tree size, stop the search */ | |
| if (match[matchLength] < ip[matchLength]) { | |
| commonLengthSmaller = matchLength; /* all smaller will now have at least this guaranteed common length */ | |
| dictMatchIndex = nextPtr[1]; /* new matchIndex larger than previous (closer to current) */ | |
| } else { | |
| /* match is larger than current */ | |
| commonLengthLarger = matchLength; | |
| dictMatchIndex = nextPtr[0]; | |
| } } } /* if (dictMode == ZSTD_dictMatchState) */ | |
| assert(matchEndIdx > curr+8); | |
| ms->nextToUpdate = matchEndIdx - 8; /* skip repetitive patterns */ | |
| return mnum; | |
| } | |
| typedef U32 (*ZSTD_getAllMatchesFn)( | |
| ZSTD_match_t*, | |
| ZSTD_MatchState_t*, | |
| U32*, | |
| const BYTE*, | |
| const BYTE*, | |
| const U32 rep[ZSTD_REP_NUM], | |
| U32 const ll0, | |
| U32 const lengthToBeat); | |
| FORCE_INLINE_TEMPLATE | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| U32 ZSTD_btGetAllMatches_internal( | |
| ZSTD_match_t* matches, | |
| ZSTD_MatchState_t* ms, | |
| U32* nextToUpdate3, | |
| const BYTE* ip, | |
| const BYTE* const iHighLimit, | |
| const U32 rep[ZSTD_REP_NUM], | |
| U32 const ll0, | |
| U32 const lengthToBeat, | |
| const ZSTD_dictMode_e dictMode, | |
| const U32 mls) | |
| { | |
| assert(BOUNDED(3, ms->cParams.minMatch, 6) == mls); | |
| DEBUGLOG(8, "ZSTD_BtGetAllMatches(dictMode=%d, mls=%u)", (int)dictMode, mls); | |
| if (ip < ms->window.base + ms->nextToUpdate) | |
| return 0; /* skipped area */ | |
| ZSTD_updateTree_internal(ms, ip, iHighLimit, mls, dictMode); | |
| return ZSTD_insertBtAndGetAllMatches(matches, ms, nextToUpdate3, ip, iHighLimit, dictMode, rep, ll0, lengthToBeat, mls); | |
| } | |
| #define ZSTD_BT_GET_ALL_MATCHES_FN(dictMode, mls) ZSTD_btGetAllMatches_##dictMode##_##mls | |
| #define GEN_ZSTD_BT_GET_ALL_MATCHES_(dictMode, mls) \ | |
| static U32 ZSTD_BT_GET_ALL_MATCHES_FN(dictMode, mls)( \ | |
| ZSTD_match_t* matches, \ | |
| ZSTD_MatchState_t* ms, \ | |
| U32* nextToUpdate3, \ | |
| const BYTE* ip, \ | |
| const BYTE* const iHighLimit, \ | |
| const U32 rep[ZSTD_REP_NUM], \ | |
| U32 const ll0, \ | |
| U32 const lengthToBeat) \ | |
| { \ | |
| return ZSTD_btGetAllMatches_internal( \ | |
| matches, ms, nextToUpdate3, ip, iHighLimit, \ | |
| rep, ll0, lengthToBeat, ZSTD_##dictMode, mls); \ | |
| } | |
| #define GEN_ZSTD_BT_GET_ALL_MATCHES(dictMode) \ | |
| GEN_ZSTD_BT_GET_ALL_MATCHES_(dictMode, 3) \ | |
| GEN_ZSTD_BT_GET_ALL_MATCHES_(dictMode, 4) \ | |
| GEN_ZSTD_BT_GET_ALL_MATCHES_(dictMode, 5) \ | |
| GEN_ZSTD_BT_GET_ALL_MATCHES_(dictMode, 6) | |
| GEN_ZSTD_BT_GET_ALL_MATCHES(noDict) | |
| GEN_ZSTD_BT_GET_ALL_MATCHES(extDict) | |
| GEN_ZSTD_BT_GET_ALL_MATCHES(dictMatchState) | |
| #define ZSTD_BT_GET_ALL_MATCHES_ARRAY(dictMode) \ | |
| { \ | |
| ZSTD_BT_GET_ALL_MATCHES_FN(dictMode, 3), \ | |
| ZSTD_BT_GET_ALL_MATCHES_FN(dictMode, 4), \ | |
| ZSTD_BT_GET_ALL_MATCHES_FN(dictMode, 5), \ | |
| ZSTD_BT_GET_ALL_MATCHES_FN(dictMode, 6) \ | |
| } | |
| static ZSTD_getAllMatchesFn | |
| ZSTD_selectBtGetAllMatches(ZSTD_MatchState_t const* ms, ZSTD_dictMode_e const dictMode) | |
| { | |
| ZSTD_getAllMatchesFn const getAllMatchesFns[3][4] = { | |
| ZSTD_BT_GET_ALL_MATCHES_ARRAY(noDict), | |
| ZSTD_BT_GET_ALL_MATCHES_ARRAY(extDict), | |
| ZSTD_BT_GET_ALL_MATCHES_ARRAY(dictMatchState) | |
| }; | |
| U32 const mls = BOUNDED(3, ms->cParams.minMatch, 6); | |
| assert((U32)dictMode < 3); | |
| assert(mls - 3 < 4); | |
| return getAllMatchesFns[(int)dictMode][mls - 3]; | |
| } | |
| /* *********************** | |
| * LDM helper functions * | |
| *************************/ | |
| /* Struct containing info needed to make decision about ldm inclusion */ | |
| typedef struct { | |
| RawSeqStore_t seqStore; /* External match candidates store for this block */ | |
| U32 startPosInBlock; /* Start position of the current match candidate */ | |
| U32 endPosInBlock; /* End position of the current match candidate */ | |
| U32 offset; /* Offset of the match candidate */ | |
| } ZSTD_optLdm_t; | |
| /* ZSTD_optLdm_skipRawSeqStoreBytes(): | |
| * Moves forward in @rawSeqStore by @nbBytes, | |
| * which will update the fields 'pos' and 'posInSequence'. | |
| */ | |
| static void ZSTD_optLdm_skipRawSeqStoreBytes(RawSeqStore_t* rawSeqStore, size_t nbBytes) | |
| { | |
| U32 currPos = (U32)(rawSeqStore->posInSequence + nbBytes); | |
| while (currPos && rawSeqStore->pos < rawSeqStore->size) { | |
| rawSeq currSeq = rawSeqStore->seq[rawSeqStore->pos]; | |
| if (currPos >= currSeq.litLength + currSeq.matchLength) { | |
| currPos -= currSeq.litLength + currSeq.matchLength; | |
| rawSeqStore->pos++; | |
| } else { | |
| rawSeqStore->posInSequence = currPos; | |
| break; | |
| } | |
| } | |
| if (currPos == 0 || rawSeqStore->pos == rawSeqStore->size) { | |
| rawSeqStore->posInSequence = 0; | |
| } | |
| } | |
| /* ZSTD_opt_getNextMatchAndUpdateSeqStore(): | |
| * Calculates the beginning and end of the next match in the current block. | |
| * Updates 'pos' and 'posInSequence' of the ldmSeqStore. | |
| */ | |
| static void | |
| ZSTD_opt_getNextMatchAndUpdateSeqStore(ZSTD_optLdm_t* optLdm, U32 currPosInBlock, | |
| U32 blockBytesRemaining) | |
| { | |
| rawSeq currSeq; | |
| U32 currBlockEndPos; | |
| U32 literalsBytesRemaining; | |
| U32 matchBytesRemaining; | |
| /* Setting match end position to MAX to ensure we never use an LDM during this block */ | |
| if (optLdm->seqStore.size == 0 || optLdm->seqStore.pos >= optLdm->seqStore.size) { | |
| optLdm->startPosInBlock = UINT_MAX; | |
| optLdm->endPosInBlock = UINT_MAX; | |
| return; | |
| } | |
| /* Calculate appropriate bytes left in matchLength and litLength | |
| * after adjusting based on ldmSeqStore->posInSequence */ | |
| currSeq = optLdm->seqStore.seq[optLdm->seqStore.pos]; | |
| assert(optLdm->seqStore.posInSequence <= currSeq.litLength + currSeq.matchLength); | |
| currBlockEndPos = currPosInBlock + blockBytesRemaining; | |
| literalsBytesRemaining = (optLdm->seqStore.posInSequence < currSeq.litLength) ? | |
| currSeq.litLength - (U32)optLdm->seqStore.posInSequence : | |
| 0; | |
| matchBytesRemaining = (literalsBytesRemaining == 0) ? | |
| currSeq.matchLength - ((U32)optLdm->seqStore.posInSequence - currSeq.litLength) : | |
| currSeq.matchLength; | |
| /* If there are more literal bytes than bytes remaining in block, no ldm is possible */ | |
| if (literalsBytesRemaining >= blockBytesRemaining) { | |
| optLdm->startPosInBlock = UINT_MAX; | |
| optLdm->endPosInBlock = UINT_MAX; | |
| ZSTD_optLdm_skipRawSeqStoreBytes(&optLdm->seqStore, blockBytesRemaining); | |
| return; | |
| } | |
| /* Matches may be < minMatch by this process. In that case, we will reject them | |
| when we are deciding whether or not to add the ldm */ | |
| optLdm->startPosInBlock = currPosInBlock + literalsBytesRemaining; | |
| optLdm->endPosInBlock = optLdm->startPosInBlock + matchBytesRemaining; | |
| optLdm->offset = currSeq.offset; | |
| if (optLdm->endPosInBlock > currBlockEndPos) { | |
| /* Match ends after the block ends, we can't use the whole match */ | |
| optLdm->endPosInBlock = currBlockEndPos; | |
| ZSTD_optLdm_skipRawSeqStoreBytes(&optLdm->seqStore, currBlockEndPos - currPosInBlock); | |
| } else { | |
| /* Consume nb of bytes equal to size of sequence left */ | |
| ZSTD_optLdm_skipRawSeqStoreBytes(&optLdm->seqStore, literalsBytesRemaining + matchBytesRemaining); | |
| } | |
| } | |
| /* ZSTD_optLdm_maybeAddMatch(): | |
| * Adds a match if it's long enough, | |
| * based on it's 'matchStartPosInBlock' and 'matchEndPosInBlock', | |
| * into 'matches'. Maintains the correct ordering of 'matches'. | |
| */ | |
| static void ZSTD_optLdm_maybeAddMatch(ZSTD_match_t* matches, U32* nbMatches, | |
| const ZSTD_optLdm_t* optLdm, U32 currPosInBlock, | |
| U32 minMatch) | |
| { | |
| U32 const posDiff = currPosInBlock - optLdm->startPosInBlock; | |
| /* Note: ZSTD_match_t actually contains offBase and matchLength (before subtracting MINMATCH) */ | |
| U32 const candidateMatchLength = optLdm->endPosInBlock - optLdm->startPosInBlock - posDiff; | |
| /* Ensure that current block position is not outside of the match */ | |
| if (currPosInBlock < optLdm->startPosInBlock | |
| || currPosInBlock >= optLdm->endPosInBlock | |
| || candidateMatchLength < minMatch) { | |
| return; | |
| } | |
| if (*nbMatches == 0 || ((candidateMatchLength > matches[*nbMatches-1].len) && *nbMatches < ZSTD_OPT_NUM)) { | |
| U32 const candidateOffBase = OFFSET_TO_OFFBASE(optLdm->offset); | |
| DEBUGLOG(6, "ZSTD_optLdm_maybeAddMatch(): Adding ldm candidate match (offBase: %u matchLength %u) at block position=%u", | |
| candidateOffBase, candidateMatchLength, currPosInBlock); | |
| matches[*nbMatches].len = candidateMatchLength; | |
| matches[*nbMatches].off = candidateOffBase; | |
| (*nbMatches)++; | |
| } | |
| } | |
| /* ZSTD_optLdm_processMatchCandidate(): | |
| * Wrapper function to update ldm seq store and call ldm functions as necessary. | |
| */ | |
| static void | |
| ZSTD_optLdm_processMatchCandidate(ZSTD_optLdm_t* optLdm, | |
| ZSTD_match_t* matches, U32* nbMatches, | |
| U32 currPosInBlock, U32 remainingBytes, | |
| U32 minMatch) | |
| { | |
| if (optLdm->seqStore.size == 0 || optLdm->seqStore.pos >= optLdm->seqStore.size) { | |
| return; | |
| } | |
| if (currPosInBlock >= optLdm->endPosInBlock) { | |
| if (currPosInBlock > optLdm->endPosInBlock) { | |
| /* The position at which ZSTD_optLdm_processMatchCandidate() is called is not necessarily | |
| * at the end of a match from the ldm seq store, and will often be some bytes | |
| * over beyond matchEndPosInBlock. As such, we need to correct for these "overshoots" | |
| */ | |
| U32 const posOvershoot = currPosInBlock - optLdm->endPosInBlock; | |
| ZSTD_optLdm_skipRawSeqStoreBytes(&optLdm->seqStore, posOvershoot); | |
| } | |
| ZSTD_opt_getNextMatchAndUpdateSeqStore(optLdm, currPosInBlock, remainingBytes); | |
| } | |
| ZSTD_optLdm_maybeAddMatch(matches, nbMatches, optLdm, currPosInBlock, minMatch); | |
| } | |
| /*-******************************* | |
| * Optimal parser | |
| *********************************/ | |
| #if 0 /* debug */ | |
| static void | |
| listStats(const U32* table, int lastEltID) | |
| { | |
| int const nbElts = lastEltID + 1; | |
| int enb; | |
| for (enb=0; enb < nbElts; enb++) { | |
| (void)table; | |
| /* RAWLOG(2, "%3i:%3i, ", enb, table[enb]); */ | |
| RAWLOG(2, "%4i,", table[enb]); | |
| } | |
| RAWLOG(2, " \n"); | |
| } | |
| #endif | |
| #define LIT_PRICE(_p) (int)ZSTD_rawLiteralsCost(_p, 1, optStatePtr, optLevel) | |
| #define LL_PRICE(_l) (int)ZSTD_litLengthPrice(_l, optStatePtr, optLevel) | |
| #define LL_INCPRICE(_l) (LL_PRICE(_l) - LL_PRICE(_l-1)) | |
| FORCE_INLINE_TEMPLATE | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| size_t | |
| ZSTD_compressBlock_opt_generic(ZSTD_MatchState_t* ms, | |
| SeqStore_t* seqStore, | |
| U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize, | |
| const int optLevel, | |
| const ZSTD_dictMode_e dictMode) | |
| { | |
| optState_t* const optStatePtr = &ms->opt; | |
| const BYTE* const istart = (const BYTE*)src; | |
| const BYTE* ip = istart; | |
| const BYTE* anchor = istart; | |
| const BYTE* const iend = istart + srcSize; | |
| const BYTE* const ilimit = iend - 8; | |
| const BYTE* const base = ms->window.base; | |
| const BYTE* const prefixStart = base + ms->window.dictLimit; | |
| const ZSTD_compressionParameters* const cParams = &ms->cParams; | |
| ZSTD_getAllMatchesFn getAllMatches = ZSTD_selectBtGetAllMatches(ms, dictMode); | |
| U32 const sufficient_len = MIN(cParams->targetLength, ZSTD_OPT_NUM -1); | |
| U32 const minMatch = (cParams->minMatch == 3) ? 3 : 4; | |
| U32 nextToUpdate3 = ms->nextToUpdate; | |
| ZSTD_optimal_t* const opt = optStatePtr->priceTable; | |
| ZSTD_match_t* const matches = optStatePtr->matchTable; | |
| ZSTD_optimal_t lastStretch; | |
| ZSTD_optLdm_t optLdm; | |
| ZSTD_memset(&lastStretch, 0, sizeof(ZSTD_optimal_t)); | |
| optLdm.seqStore = ms->ldmSeqStore ? *ms->ldmSeqStore : kNullRawSeqStore; | |
| optLdm.endPosInBlock = optLdm.startPosInBlock = optLdm.offset = 0; | |
| ZSTD_opt_getNextMatchAndUpdateSeqStore(&optLdm, (U32)(ip-istart), (U32)(iend-ip)); | |
| /* init */ | |
| DEBUGLOG(5, "ZSTD_compressBlock_opt_generic: current=%u, prefix=%u, nextToUpdate=%u", | |
| (U32)(ip - base), ms->window.dictLimit, ms->nextToUpdate); | |
| assert(optLevel <= 2); | |
| ZSTD_rescaleFreqs(optStatePtr, (const BYTE*)src, srcSize, optLevel); | |
| ip += (ip==prefixStart); | |
| /* Match Loop */ | |
| while (ip < ilimit) { | |
| U32 cur, last_pos = 0; | |
| /* find first match */ | |
| { U32 const litlen = (U32)(ip - anchor); | |
| U32 const ll0 = !litlen; | |
| U32 nbMatches = getAllMatches(matches, ms, &nextToUpdate3, ip, iend, rep, ll0, minMatch); | |
| ZSTD_optLdm_processMatchCandidate(&optLdm, matches, &nbMatches, | |
| (U32)(ip-istart), (U32)(iend-ip), | |
| minMatch); | |
| if (!nbMatches) { | |
| DEBUGLOG(8, "no match found at cPos %u", (unsigned)(ip-istart)); | |
| ip++; | |
| continue; | |
| } | |
| /* Match found: let's store this solution, and eventually find more candidates. | |
| * During this forward pass, @opt is used to store stretches, | |
| * defined as "a match followed by N literals". | |
| * Note how this is different from a Sequence, which is "N literals followed by a match". | |
| * Storing stretches allows us to store different match predecessors | |
| * for each literal position part of a literals run. */ | |
| /* initialize opt[0] */ | |
| opt[0].mlen = 0; /* there are only literals so far */ | |
| opt[0].litlen = litlen; | |
| /* No need to include the actual price of the literals before the first match | |
| * because it is static for the duration of the forward pass, and is included | |
| * in every subsequent price. But, we include the literal length because | |
| * the cost variation of litlen depends on the value of litlen. | |
| */ | |
| opt[0].price = LL_PRICE(litlen); | |
| ZSTD_STATIC_ASSERT(sizeof(opt[0].rep[0]) == sizeof(rep[0])); | |
| ZSTD_memcpy(&opt[0].rep, rep, sizeof(opt[0].rep)); | |
| /* large match -> immediate encoding */ | |
| { U32 const maxML = matches[nbMatches-1].len; | |
| U32 const maxOffBase = matches[nbMatches-1].off; | |
| DEBUGLOG(6, "found %u matches of maxLength=%u and maxOffBase=%u at cPos=%u => start new series", | |
| nbMatches, maxML, maxOffBase, (U32)(ip-prefixStart)); | |
| if (maxML > sufficient_len) { | |
| lastStretch.litlen = 0; | |
| lastStretch.mlen = maxML; | |
| lastStretch.off = maxOffBase; | |
| DEBUGLOG(6, "large match (%u>%u) => immediate encoding", | |
| maxML, sufficient_len); | |
| cur = 0; | |
| last_pos = maxML; | |
| goto _shortestPath; | |
| } } | |
| /* set prices for first matches starting position == 0 */ | |
| assert(opt[0].price >= 0); | |
| { U32 pos; | |
| U32 matchNb; | |
| for (pos = 1; pos < minMatch; pos++) { | |
| opt[pos].price = ZSTD_MAX_PRICE; | |
| opt[pos].mlen = 0; | |
| opt[pos].litlen = litlen + pos; | |
| } | |
| for (matchNb = 0; matchNb < nbMatches; matchNb++) { | |
| U32 const offBase = matches[matchNb].off; | |
| U32 const end = matches[matchNb].len; | |
| for ( ; pos <= end ; pos++ ) { | |
| int const matchPrice = (int)ZSTD_getMatchPrice(offBase, pos, optStatePtr, optLevel); | |
| int const sequencePrice = opt[0].price + matchPrice; | |
| DEBUGLOG(7, "rPos:%u => set initial price : %.2f", | |
| pos, ZSTD_fCost(sequencePrice)); | |
| opt[pos].mlen = pos; | |
| opt[pos].off = offBase; | |
| opt[pos].litlen = 0; /* end of match */ | |
| opt[pos].price = sequencePrice + LL_PRICE(0); | |
| } | |
| } | |
| last_pos = pos-1; | |
| opt[pos].price = ZSTD_MAX_PRICE; | |
| } | |
| } | |
| /* check further positions */ | |
| for (cur = 1; cur <= last_pos; cur++) { | |
| const BYTE* const inr = ip + cur; | |
| assert(cur <= ZSTD_OPT_NUM); | |
| DEBUGLOG(7, "cPos:%i==rPos:%u", (int)(inr-istart), cur); | |
| /* Fix current position with one literal if cheaper */ | |
| { U32 const litlen = opt[cur-1].litlen + 1; | |
| int const price = opt[cur-1].price | |
| + LIT_PRICE(ip+cur-1) | |
| + LL_INCPRICE(litlen); | |
| assert(price < 1000000000); /* overflow check */ | |
| if (price <= opt[cur].price) { | |
| ZSTD_optimal_t const prevMatch = opt[cur]; | |
| DEBUGLOG(7, "cPos:%i==rPos:%u : better price (%.2f<=%.2f) using literal (ll==%u) (hist:%u,%u,%u)", | |
| (int)(inr-istart), cur, ZSTD_fCost(price), ZSTD_fCost(opt[cur].price), litlen, | |
| opt[cur-1].rep[0], opt[cur-1].rep[1], opt[cur-1].rep[2]); | |
| opt[cur] = opt[cur-1]; | |
| opt[cur].litlen = litlen; | |
| opt[cur].price = price; | |
| if ( (optLevel >= 1) /* additional check only for higher modes */ | |
| && (prevMatch.litlen == 0) /* replace a match */ | |
| && (LL_INCPRICE(1) < 0) /* ll1 is cheaper than ll0 */ | |
| && LIKELY(ip + cur < iend) | |
| ) { | |
| /* check next position, in case it would be cheaper */ | |
| int with1literal = prevMatch.price + LIT_PRICE(ip+cur) + LL_INCPRICE(1); | |
| int withMoreLiterals = price + LIT_PRICE(ip+cur) + LL_INCPRICE(litlen+1); | |
| DEBUGLOG(7, "then at next rPos %u : match+1lit %.2f vs %ulits %.2f", | |
| cur+1, ZSTD_fCost(with1literal), litlen+1, ZSTD_fCost(withMoreLiterals)); | |
| if ( (with1literal < withMoreLiterals) | |
| && (with1literal < opt[cur+1].price) ) { | |
| /* update offset history - before it disappears */ | |
| U32 const prev = cur - prevMatch.mlen; | |
| Repcodes_t const newReps = ZSTD_newRep(opt[prev].rep, prevMatch.off, opt[prev].litlen==0); | |
| assert(cur >= prevMatch.mlen); | |
| DEBUGLOG(7, "==> match+1lit is cheaper (%.2f < %.2f) (hist:%u,%u,%u) !", | |
| ZSTD_fCost(with1literal), ZSTD_fCost(withMoreLiterals), | |
| newReps.rep[0], newReps.rep[1], newReps.rep[2] ); | |
| opt[cur+1] = prevMatch; /* mlen & offbase */ | |
| ZSTD_memcpy(opt[cur+1].rep, &newReps, sizeof(Repcodes_t)); | |
| opt[cur+1].litlen = 1; | |
| opt[cur+1].price = with1literal; | |
| if (last_pos < cur+1) last_pos = cur+1; | |
| } | |
| } | |
| } else { | |
| DEBUGLOG(7, "cPos:%i==rPos:%u : literal would cost more (%.2f>%.2f)", | |
| (int)(inr-istart), cur, ZSTD_fCost(price), ZSTD_fCost(opt[cur].price)); | |
| } | |
| } | |
| /* Offset history is not updated during match comparison. | |
| * Do it here, now that the match is selected and confirmed. | |
| */ | |
| ZSTD_STATIC_ASSERT(sizeof(opt[cur].rep) == sizeof(Repcodes_t)); | |
| assert(cur >= opt[cur].mlen); | |
| if (opt[cur].litlen == 0) { | |
| /* just finished a match => alter offset history */ | |
| U32 const prev = cur - opt[cur].mlen; | |
| Repcodes_t const newReps = ZSTD_newRep(opt[prev].rep, opt[cur].off, opt[prev].litlen==0); | |
| ZSTD_memcpy(opt[cur].rep, &newReps, sizeof(Repcodes_t)); | |
| } | |
| /* last match must start at a minimum distance of 8 from oend */ | |
| if (inr > ilimit) continue; | |
| if (cur == last_pos) break; | |
| if ( (optLevel==0) /*static_test*/ | |
| && (opt[cur+1].price <= opt[cur].price + (BITCOST_MULTIPLIER/2)) ) { | |
| DEBUGLOG(7, "skip current position : next rPos(%u) price is cheaper", cur+1); | |
| continue; /* skip unpromising positions; about ~+6% speed, -0.01 ratio */ | |
| } | |
| assert(opt[cur].price >= 0); | |
| { U32 const ll0 = (opt[cur].litlen == 0); | |
| int const previousPrice = opt[cur].price; | |
| int const basePrice = previousPrice + LL_PRICE(0); | |
| U32 nbMatches = getAllMatches(matches, ms, &nextToUpdate3, inr, iend, opt[cur].rep, ll0, minMatch); | |
| U32 matchNb; | |
| ZSTD_optLdm_processMatchCandidate(&optLdm, matches, &nbMatches, | |
| (U32)(inr-istart), (U32)(iend-inr), | |
| minMatch); | |
| if (!nbMatches) { | |
| DEBUGLOG(7, "rPos:%u : no match found", cur); | |
| continue; | |
| } | |
| { U32 const longestML = matches[nbMatches-1].len; | |
| DEBUGLOG(7, "cPos:%i==rPos:%u, found %u matches, of longest ML=%u", | |
| (int)(inr-istart), cur, nbMatches, longestML); | |
| if ( (longestML > sufficient_len) | |
| || (cur + longestML >= ZSTD_OPT_NUM) | |
| || (ip + cur + longestML >= iend) ) { | |
| lastStretch.mlen = longestML; | |
| lastStretch.off = matches[nbMatches-1].off; | |
| lastStretch.litlen = 0; | |
| last_pos = cur + longestML; | |
| goto _shortestPath; | |
| } } | |
| /* set prices using matches found at position == cur */ | |
| for (matchNb = 0; matchNb < nbMatches; matchNb++) { | |
| U32 const offset = matches[matchNb].off; | |
| U32 const lastML = matches[matchNb].len; | |
| U32 const startML = (matchNb>0) ? matches[matchNb-1].len+1 : minMatch; | |
| U32 mlen; | |
| DEBUGLOG(7, "testing match %u => offBase=%4u, mlen=%2u, llen=%2u", | |
| matchNb, matches[matchNb].off, lastML, opt[cur].litlen); | |
| for (mlen = lastML; mlen >= startML; mlen--) { /* scan downward */ | |
| U32 const pos = cur + mlen; | |
| int const price = basePrice + (int)ZSTD_getMatchPrice(offset, mlen, optStatePtr, optLevel); | |
| if ((pos > last_pos) || (price < opt[pos].price)) { | |
| DEBUGLOG(7, "rPos:%u (ml=%2u) => new better price (%.2f<%.2f)", | |
| pos, mlen, ZSTD_fCost(price), ZSTD_fCost(opt[pos].price)); | |
| while (last_pos < pos) { | |
| /* fill empty positions, for future comparisons */ | |
| last_pos++; | |
| opt[last_pos].price = ZSTD_MAX_PRICE; | |
| opt[last_pos].litlen = !0; /* just needs to be != 0, to mean "not an end of match" */ | |
| } | |
| opt[pos].mlen = mlen; | |
| opt[pos].off = offset; | |
| opt[pos].litlen = 0; | |
| opt[pos].price = price; | |
| } else { | |
| DEBUGLOG(7, "rPos:%u (ml=%2u) => new price is worse (%.2f>=%.2f)", | |
| pos, mlen, ZSTD_fCost(price), ZSTD_fCost(opt[pos].price)); | |
| if (optLevel==0) break; /* early update abort; gets ~+10% speed for about -0.01 ratio loss */ | |
| } | |
| } } } | |
| opt[last_pos+1].price = ZSTD_MAX_PRICE; | |
| } /* for (cur = 1; cur <= last_pos; cur++) */ | |
| lastStretch = opt[last_pos]; | |
| assert(cur >= lastStretch.mlen); | |
| cur = last_pos - lastStretch.mlen; | |
| _shortestPath: /* cur, last_pos, best_mlen, best_off have to be set */ | |
| assert(opt[0].mlen == 0); | |
| assert(last_pos >= lastStretch.mlen); | |
| assert(cur == last_pos - lastStretch.mlen); | |
| if (lastStretch.mlen==0) { | |
| /* no solution : all matches have been converted into literals */ | |
| assert(lastStretch.litlen == (ip - anchor) + last_pos); | |
| ip += last_pos; | |
| continue; | |
| } | |
| assert(lastStretch.off > 0); | |
| /* Update offset history */ | |
| if (lastStretch.litlen == 0) { | |
| /* finishing on a match : update offset history */ | |
| Repcodes_t const reps = ZSTD_newRep(opt[cur].rep, lastStretch.off, opt[cur].litlen==0); | |
| ZSTD_memcpy(rep, &reps, sizeof(Repcodes_t)); | |
| } else { | |
| ZSTD_memcpy(rep, lastStretch.rep, sizeof(Repcodes_t)); | |
| assert(cur >= lastStretch.litlen); | |
| cur -= lastStretch.litlen; | |
| } | |
| /* Let's write the shortest path solution. | |
| * It is stored in @opt in reverse order, | |
| * starting from @storeEnd (==cur+2), | |
| * effectively partially @opt overwriting. | |
| * Content is changed too: | |
| * - So far, @opt stored stretches, aka a match followed by literals | |
| * - Now, it will store sequences, aka literals followed by a match | |
| */ | |
| { U32 const storeEnd = cur + 2; | |
| U32 storeStart = storeEnd; | |
| U32 stretchPos = cur; | |
| DEBUGLOG(6, "start reverse traversal (last_pos:%u, cur:%u)", | |
| last_pos, cur); (void)last_pos; | |
| assert(storeEnd < ZSTD_OPT_SIZE); | |
| DEBUGLOG(6, "last stretch copied into pos=%u (llen=%u,mlen=%u,ofc=%u)", | |
| storeEnd, lastStretch.litlen, lastStretch.mlen, lastStretch.off); | |
| if (lastStretch.litlen > 0) { | |
| /* last "sequence" is unfinished: just a bunch of literals */ | |
| opt[storeEnd].litlen = lastStretch.litlen; | |
| opt[storeEnd].mlen = 0; | |
| storeStart = storeEnd-1; | |
| opt[storeStart] = lastStretch; | |
| } { | |
| opt[storeEnd] = lastStretch; /* note: litlen will be fixed */ | |
| storeStart = storeEnd; | |
| } | |
| while (1) { | |
| ZSTD_optimal_t nextStretch = opt[stretchPos]; | |
| opt[storeStart].litlen = nextStretch.litlen; | |
| DEBUGLOG(6, "selected sequence (llen=%u,mlen=%u,ofc=%u)", | |
| opt[storeStart].litlen, opt[storeStart].mlen, opt[storeStart].off); | |
| if (nextStretch.mlen == 0) { | |
| /* reaching beginning of segment */ | |
| break; | |
| } | |
| storeStart--; | |
| opt[storeStart] = nextStretch; /* note: litlen will be fixed */ | |
| assert(nextStretch.litlen + nextStretch.mlen <= stretchPos); | |
| stretchPos -= nextStretch.litlen + nextStretch.mlen; | |
| } | |
| /* save sequences */ | |
| DEBUGLOG(6, "sending selected sequences into seqStore"); | |
| { U32 storePos; | |
| for (storePos=storeStart; storePos <= storeEnd; storePos++) { | |
| U32 const llen = opt[storePos].litlen; | |
| U32 const mlen = opt[storePos].mlen; | |
| U32 const offBase = opt[storePos].off; | |
| U32 const advance = llen + mlen; | |
| DEBUGLOG(6, "considering seq starting at %i, llen=%u, mlen=%u", | |
| (int)(anchor - istart), (unsigned)llen, (unsigned)mlen); | |
| if (mlen==0) { /* only literals => must be last "sequence", actually starting a new stream of sequences */ | |
| assert(storePos == storeEnd); /* must be last sequence */ | |
| ip = anchor + llen; /* last "sequence" is a bunch of literals => don't progress anchor */ | |
| continue; /* will finish */ | |
| } | |
| assert(anchor + llen <= iend); | |
| ZSTD_updateStats(optStatePtr, llen, anchor, offBase, mlen); | |
| ZSTD_storeSeq(seqStore, llen, anchor, iend, offBase, mlen); | |
| anchor += advance; | |
| ip = anchor; | |
| } } | |
| DEBUGLOG(7, "new offset history : %u, %u, %u", rep[0], rep[1], rep[2]); | |
| /* update all costs */ | |
| ZSTD_setBasePrices(optStatePtr, optLevel); | |
| } | |
| } /* while (ip < ilimit) */ | |
| /* Return the last literals size */ | |
| return (size_t)(iend - anchor); | |
| } | |
| #endif /* build exclusions */ | |
| #ifndef ZSTD_EXCLUDE_BTOPT_BLOCK_COMPRESSOR | |
| static size_t ZSTD_compressBlock_opt0( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize, const ZSTD_dictMode_e dictMode) | |
| { | |
| return ZSTD_compressBlock_opt_generic(ms, seqStore, rep, src, srcSize, 0 /* optLevel */, dictMode); | |
| } | |
| #endif | |
| #ifndef ZSTD_EXCLUDE_BTULTRA_BLOCK_COMPRESSOR | |
| static size_t ZSTD_compressBlock_opt2( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize, const ZSTD_dictMode_e dictMode) | |
| { | |
| return ZSTD_compressBlock_opt_generic(ms, seqStore, rep, src, srcSize, 2 /* optLevel */, dictMode); | |
| } | |
| #endif | |
| #ifndef ZSTD_EXCLUDE_BTOPT_BLOCK_COMPRESSOR | |
| size_t ZSTD_compressBlock_btopt( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| DEBUGLOG(5, "ZSTD_compressBlock_btopt"); | |
| return ZSTD_compressBlock_opt0(ms, seqStore, rep, src, srcSize, ZSTD_noDict); | |
| } | |
| #endif | |
| #ifndef ZSTD_EXCLUDE_BTULTRA_BLOCK_COMPRESSOR | |
| /* ZSTD_initStats_ultra(): | |
| * make a first compression pass, just to seed stats with more accurate starting values. | |
| * only works on first block, with no dictionary and no ldm. | |
| * this function cannot error out, its narrow contract must be respected. | |
| */ | |
| static | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| void ZSTD_initStats_ultra(ZSTD_MatchState_t* ms, | |
| SeqStore_t* seqStore, | |
| U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| U32 tmpRep[ZSTD_REP_NUM]; /* updated rep codes will sink here */ | |
| ZSTD_memcpy(tmpRep, rep, sizeof(tmpRep)); | |
| DEBUGLOG(4, "ZSTD_initStats_ultra (srcSize=%zu)", srcSize); | |
| assert(ms->opt.litLengthSum == 0); /* first block */ | |
| assert(seqStore->sequences == seqStore->sequencesStart); /* no ldm */ | |
| assert(ms->window.dictLimit == ms->window.lowLimit); /* no dictionary */ | |
| assert(ms->window.dictLimit - ms->nextToUpdate <= 1); /* no prefix (note: intentional overflow, defined as 2-complement) */ | |
| ZSTD_compressBlock_opt2(ms, seqStore, tmpRep, src, srcSize, ZSTD_noDict); /* generate stats into ms->opt*/ | |
| /* invalidate first scan from history, only keep entropy stats */ | |
| ZSTD_resetSeqStore(seqStore); | |
| ms->window.base -= srcSize; | |
| ms->window.dictLimit += (U32)srcSize; | |
| ms->window.lowLimit = ms->window.dictLimit; | |
| ms->nextToUpdate = ms->window.dictLimit; | |
| } | |
| size_t ZSTD_compressBlock_btultra( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| DEBUGLOG(5, "ZSTD_compressBlock_btultra (srcSize=%zu)", srcSize); | |
| return ZSTD_compressBlock_opt2(ms, seqStore, rep, src, srcSize, ZSTD_noDict); | |
| } | |
| size_t ZSTD_compressBlock_btultra2( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| U32 const curr = (U32)((const BYTE*)src - ms->window.base); | |
| DEBUGLOG(5, "ZSTD_compressBlock_btultra2 (srcSize=%zu)", srcSize); | |
| /* 2-passes strategy: | |
| * this strategy makes a first pass over first block to collect statistics | |
| * in order to seed next round's statistics with it. | |
| * After 1st pass, function forgets history, and starts a new block. | |
| * Consequently, this can only work if no data has been previously loaded in tables, | |
| * aka, no dictionary, no prefix, no ldm preprocessing. | |
| * The compression ratio gain is generally small (~0.5% on first block), | |
| * the cost is 2x cpu time on first block. */ | |
| assert(srcSize <= ZSTD_BLOCKSIZE_MAX); | |
| if ( (ms->opt.litLengthSum==0) /* first block */ | |
| && (seqStore->sequences == seqStore->sequencesStart) /* no ldm */ | |
| && (ms->window.dictLimit == ms->window.lowLimit) /* no dictionary */ | |
| && (curr == ms->window.dictLimit) /* start of frame, nothing already loaded nor skipped */ | |
| && (srcSize > ZSTD_PREDEF_THRESHOLD) /* input large enough to not employ default stats */ | |
| ) { | |
| ZSTD_initStats_ultra(ms, seqStore, rep, src, srcSize); | |
| } | |
| return ZSTD_compressBlock_opt2(ms, seqStore, rep, src, srcSize, ZSTD_noDict); | |
| } | |
| #endif | |
| #ifndef ZSTD_EXCLUDE_BTOPT_BLOCK_COMPRESSOR | |
| size_t ZSTD_compressBlock_btopt_dictMatchState( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| return ZSTD_compressBlock_opt0(ms, seqStore, rep, src, srcSize, ZSTD_dictMatchState); | |
| } | |
| size_t ZSTD_compressBlock_btopt_extDict( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| return ZSTD_compressBlock_opt0(ms, seqStore, rep, src, srcSize, ZSTD_extDict); | |
| } | |
| #endif | |
| #ifndef ZSTD_EXCLUDE_BTULTRA_BLOCK_COMPRESSOR | |
| size_t ZSTD_compressBlock_btultra_dictMatchState( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| return ZSTD_compressBlock_opt2(ms, seqStore, rep, src, srcSize, ZSTD_dictMatchState); | |
| } | |
| size_t ZSTD_compressBlock_btultra_extDict( | |
| ZSTD_MatchState_t* ms, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| const void* src, size_t srcSize) | |
| { | |
| return ZSTD_compressBlock_opt2(ms, seqStore, rep, src, srcSize, ZSTD_extDict); | |
| } | |
| #endif | |
| /* note : no btultra2 variant for extDict nor dictMatchState, | |
| * because btultra2 is not meant to work with dictionaries | |
| * and is only specific for the first block (no prefix) */ |