| /* SPDX-License-Identifier: GPL-2.0-only */ | |
| /* Copyright (c) 2021, Linaro Ltd <loic.poulain@linaro.org> */ | |
| #ifndef __WWAN_H | |
| #define __WWAN_H | |
| #include <linux/poll.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/types.h> | |
| /** | |
| * enum wwan_port_type - WWAN port types | |
| * @WWAN_PORT_AT: AT commands | |
| * @WWAN_PORT_MBIM: Mobile Broadband Interface Model control | |
| * @WWAN_PORT_QMI: Qcom modem/MSM interface for modem control | |
| * @WWAN_PORT_QCDM: Qcom Modem diagnostic interface | |
| * @WWAN_PORT_FIREHOSE: XML based command protocol | |
| * @WWAN_PORT_XMMRPC: Control protocol for Intel XMM modems | |
| * @WWAN_PORT_FASTBOOT: Fastboot protocol control | |
| * @WWAN_PORT_ADB: ADB protocol control | |
| * @WWAN_PORT_MIPC: MTK MIPC diagnostic interface | |
| * | |
| * @WWAN_PORT_MAX: Highest supported port types | |
| * @WWAN_PORT_UNKNOWN: Special value to indicate an unknown port type | |
| * @__WWAN_PORT_MAX: Internal use | |
| */ | |
| enum wwan_port_type { | |
| WWAN_PORT_AT, | |
| WWAN_PORT_MBIM, | |
| WWAN_PORT_QMI, | |
| WWAN_PORT_QCDM, | |
| WWAN_PORT_FIREHOSE, | |
| WWAN_PORT_XMMRPC, | |
| WWAN_PORT_FASTBOOT, | |
| WWAN_PORT_ADB, | |
| WWAN_PORT_MIPC, | |
| /* Add new port types above this line */ | |
| __WWAN_PORT_MAX, | |
| WWAN_PORT_MAX = __WWAN_PORT_MAX - 1, | |
| WWAN_PORT_UNKNOWN, | |
| }; | |
| struct device; | |
| struct file; | |
| struct netlink_ext_ack; | |
| struct sk_buff; | |
| struct wwan_port; | |
| /** struct wwan_port_ops - The WWAN port operations | |
| * @start: The routine for starting the WWAN port device. | |
| * @stop: The routine for stopping the WWAN port device. | |
| * @tx: Non-blocking routine that sends WWAN port protocol data to the device. | |
| * @tx_blocking: Optional blocking routine that sends WWAN port protocol data | |
| * to the device. | |
| * @tx_poll: Optional routine that sets additional TX poll flags. | |
| * | |
| * The wwan_port_ops structure contains a list of low-level operations | |
| * that control a WWAN port device. All functions are mandatory unless specified. | |
| */ | |
| struct wwan_port_ops { | |
| int (*start)(struct wwan_port *port); | |
| void (*stop)(struct wwan_port *port); | |
| int (*tx)(struct wwan_port *port, struct sk_buff *skb); | |
| /* Optional operations */ | |
| int (*tx_blocking)(struct wwan_port *port, struct sk_buff *skb); | |
| __poll_t (*tx_poll)(struct wwan_port *port, struct file *filp, | |
| poll_table *wait); | |
| }; | |
| /** struct wwan_port_caps - The WWAN port capbilities | |
| * @frag_len: WWAN port TX fragments length | |
| * @headroom_len: WWAN port TX fragments reserved headroom length | |
| */ | |
| struct wwan_port_caps { | |
| size_t frag_len; | |
| unsigned int headroom_len; | |
| }; | |
| /** | |
| * wwan_create_port - Add a new WWAN port | |
| * @parent: Device to use as parent and shared by all WWAN ports | |
| * @type: WWAN port type | |
| * @ops: WWAN port operations | |
| * @caps: WWAN port capabilities | |
| * @drvdata: Pointer to caller driver data | |
| * | |
| * Allocate and register a new WWAN port. The port will be automatically exposed | |
| * to user as a character device and attached to the right virtual WWAN device, | |
| * based on the parent pointer. The parent pointer is the device shared by all | |
| * components of a same WWAN modem (e.g. USB dev, PCI dev, MHI controller...). | |
| * | |
| * drvdata will be placed in the WWAN port device driver data and can be | |
| * retrieved with wwan_port_get_drvdata(). | |
| * | |
| * This function must be balanced with a call to wwan_remove_port(). | |
| * | |
| * Returns: a valid pointer to wwan_port on success or PTR_ERR on failure | |
| */ | |
| struct wwan_port *wwan_create_port(struct device *parent, | |
| enum wwan_port_type type, | |
| const struct wwan_port_ops *ops, | |
| struct wwan_port_caps *caps, | |
| void *drvdata); | |
| /** | |
| * wwan_remove_port - Remove a WWAN port | |
| * @port: WWAN port to remove | |
| * | |
| * Remove a previously created port. | |
| */ | |
| void wwan_remove_port(struct wwan_port *port); | |
| /** | |
| * wwan_port_rx - Receive data from the WWAN port | |
| * @port: WWAN port for which data is received | |
| * @skb: Pointer to the rx buffer | |
| * | |
| * A port driver calls this function upon data reception (MBIM, AT...). | |
| */ | |
| void wwan_port_rx(struct wwan_port *port, struct sk_buff *skb); | |
| /** | |
| * wwan_port_txoff - Stop TX on WWAN port | |
| * @port: WWAN port for which TX must be stopped | |
| * | |
| * Used for TX flow control, a port driver calls this function to indicate TX | |
| * is temporary unavailable (e.g. due to ring buffer fullness). | |
| */ | |
| void wwan_port_txoff(struct wwan_port *port); | |
| /** | |
| * wwan_port_txon - Restart TX on WWAN port | |
| * @port: WWAN port for which TX must be restarted | |
| * | |
| * Used for TX flow control, a port driver calls this function to indicate TX | |
| * is available again. | |
| */ | |
| void wwan_port_txon(struct wwan_port *port); | |
| /** | |
| * wwan_port_get_drvdata - Retrieve driver data from a WWAN port | |
| * @port: Related WWAN port | |
| */ | |
| void *wwan_port_get_drvdata(struct wwan_port *port); | |
| /** | |
| * struct wwan_netdev_priv - WWAN core network device private data | |
| * @link_id: WWAN device data link id | |
| * @drv_priv: driver private data area, size is determined in &wwan_ops | |
| */ | |
| struct wwan_netdev_priv { | |
| u32 link_id; | |
| /* must be last */ | |
| u8 drv_priv[] __aligned(sizeof(void *)); | |
| }; | |
| static inline void *wwan_netdev_drvpriv(struct net_device *dev) | |
| { | |
| return ((struct wwan_netdev_priv *)netdev_priv(dev))->drv_priv; | |
| } | |
| /* | |
| * Used to indicate that the WWAN core should not create a default network | |
| * link. | |
| */ | |
| #define WWAN_NO_DEFAULT_LINK U32_MAX | |
| /** | |
| * struct wwan_ops - WWAN device ops | |
| * @priv_size: size of private netdev data area | |
| * @setup: set up a new netdev | |
| * @newlink: register the new netdev | |
| * @dellink: remove the given netdev | |
| */ | |
| struct wwan_ops { | |
| unsigned int priv_size; | |
| void (*setup)(struct net_device *dev); | |
| int (*newlink)(void *ctxt, struct net_device *dev, | |
| u32 if_id, struct netlink_ext_ack *extack); | |
| void (*dellink)(void *ctxt, struct net_device *dev, | |
| struct list_head *head); | |
| }; | |
| int wwan_register_ops(struct device *parent, const struct wwan_ops *ops, | |
| void *ctxt, u32 def_link_id); | |
| void wwan_unregister_ops(struct device *parent); | |
| #ifdef CONFIG_WWAN_DEBUGFS | |
| struct dentry *wwan_get_debugfs_dir(struct device *parent); | |
| void wwan_put_debugfs_dir(struct dentry *dir); | |
| #else | |
| static inline struct dentry *wwan_get_debugfs_dir(struct device *parent) | |
| { | |
| return ERR_PTR(-ENODEV); | |
| } | |
| static inline void wwan_put_debugfs_dir(struct dentry *dir) {} | |
| #endif | |
| #endif /* __WWAN_H */ |