| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #ifndef __SOC_TI_OMAP1_USB | |
| #define __SOC_TI_OMAP1_USB | |
| /* | |
| * Constants in this file are used all over the place, in platform | |
| * code, as well as the udc, phy and ohci drivers. | |
| * This is not a great design, but unlikely to get fixed after | |
| * such a long time. Don't do this elsewhere. | |
| */ | |
| #define OMAP1_OTG_BASE 0xfffb0400 | |
| #define OMAP1_UDC_BASE 0xfffb4000 | |
| #define OMAP2_UDC_BASE 0x4805e200 | |
| #define OMAP2_OTG_BASE 0x4805e300 | |
| #define OTG_BASE OMAP1_OTG_BASE | |
| #define UDC_BASE OMAP1_UDC_BASE | |
| /* | |
| * OTG and transceiver registers, for OMAPs starting with ARM926 | |
| */ | |
| #define OTG_REV (OTG_BASE + 0x00) | |
| #define OTG_SYSCON_1 (OTG_BASE + 0x04) | |
| # define USB2_TRX_MODE(w) (((w)>>24)&0x07) | |
| # define USB1_TRX_MODE(w) (((w)>>20)&0x07) | |
| # define USB0_TRX_MODE(w) (((w)>>16)&0x07) | |
| # define OTG_IDLE_EN (1 << 15) | |
| # define HST_IDLE_EN (1 << 14) | |
| # define DEV_IDLE_EN (1 << 13) | |
| # define OTG_RESET_DONE (1 << 2) | |
| # define OTG_SOFT_RESET (1 << 1) | |
| #define OTG_SYSCON_2 (OTG_BASE + 0x08) | |
| # define OTG_EN (1 << 31) | |
| # define USBX_SYNCHRO (1 << 30) | |
| # define OTG_MST16 (1 << 29) | |
| # define SRP_GPDATA (1 << 28) | |
| # define SRP_GPDVBUS (1 << 27) | |
| # define SRP_GPUVBUS(w) (((w)>>24)&0x07) | |
| # define A_WAIT_VRISE(w) (((w)>>20)&0x07) | |
| # define B_ASE_BRST(w) (((w)>>16)&0x07) | |
| # define SRP_DPW (1 << 14) | |
| # define SRP_DATA (1 << 13) | |
| # define SRP_VBUS (1 << 12) | |
| # define OTG_PADEN (1 << 10) | |
| # define HMC_PADEN (1 << 9) | |
| # define UHOST_EN (1 << 8) | |
| # define HMC_TLLSPEED (1 << 7) | |
| # define HMC_TLLATTACH (1 << 6) | |
| # define OTG_HMC(w) (((w)>>0)&0x3f) | |
| #define OTG_CTRL (OTG_BASE + 0x0c) | |
| # define OTG_USB2_EN (1 << 29) | |
| # define OTG_USB2_DP (1 << 28) | |
| # define OTG_USB2_DM (1 << 27) | |
| # define OTG_USB1_EN (1 << 26) | |
| # define OTG_USB1_DP (1 << 25) | |
| # define OTG_USB1_DM (1 << 24) | |
| # define OTG_USB0_EN (1 << 23) | |
| # define OTG_USB0_DP (1 << 22) | |
| # define OTG_USB0_DM (1 << 21) | |
| # define OTG_ASESSVLD (1 << 20) | |
| # define OTG_BSESSEND (1 << 19) | |
| # define OTG_BSESSVLD (1 << 18) | |
| # define OTG_VBUSVLD (1 << 17) | |
| # define OTG_ID (1 << 16) | |
| # define OTG_DRIVER_SEL (1 << 15) | |
| # define OTG_A_SETB_HNPEN (1 << 12) | |
| # define OTG_A_BUSREQ (1 << 11) | |
| # define OTG_B_HNPEN (1 << 9) | |
| # define OTG_B_BUSREQ (1 << 8) | |
| # define OTG_BUSDROP (1 << 7) | |
| # define OTG_PULLDOWN (1 << 5) | |
| # define OTG_PULLUP (1 << 4) | |
| # define OTG_DRV_VBUS (1 << 3) | |
| # define OTG_PD_VBUS (1 << 2) | |
| # define OTG_PU_VBUS (1 << 1) | |
| # define OTG_PU_ID (1 << 0) | |
| #define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ | |
| # define DRIVER_SWITCH (1 << 15) | |
| # define A_VBUS_ERR (1 << 13) | |
| # define A_REQ_TMROUT (1 << 12) | |
| # define A_SRP_DETECT (1 << 11) | |
| # define B_HNP_FAIL (1 << 10) | |
| # define B_SRP_TMROUT (1 << 9) | |
| # define B_SRP_DONE (1 << 8) | |
| # define B_SRP_STARTED (1 << 7) | |
| # define OPRT_CHG (1 << 0) | |
| #define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ | |
| // same bits as in IRQ_EN | |
| #define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ | |
| # define OTGVPD (1 << 14) | |
| # define OTGVPU (1 << 13) | |
| # define OTGPUID (1 << 12) | |
| # define USB2VDR (1 << 10) | |
| # define USB2PDEN (1 << 9) | |
| # define USB2PUEN (1 << 8) | |
| # define USB1VDR (1 << 6) | |
| # define USB1PDEN (1 << 5) | |
| # define USB1PUEN (1 << 4) | |
| # define USB0VDR (1 << 2) | |
| # define USB0PDEN (1 << 1) | |
| # define USB0PUEN (1 << 0) | |
| #define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ | |
| #define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ | |
| /*-------------------------------------------------------------------------*/ | |
| /* OMAP1 */ | |
| #define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) | |
| # define CONF_USB2_UNI_R (1 << 8) | |
| # define CONF_USB1_UNI_R (1 << 7) | |
| # define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) | |
| # define CONF_USB0_ISOLATE_R (1 << 3) | |
| # define CONF_USB_PWRDN_DM_R (1 << 2) | |
| # define CONF_USB_PWRDN_DP_R (1 << 1) | |
| #endif |