include/linux/rpmb.h

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (C) 2015-2019 Intel Corp. All rights reserved
 * Copyright (C) 2021-2022 Linaro Ltd
 */
#ifndef __RPMB_H__
#define __RPMB_H__

#include <linux/device.h>
#include <linux/types.h>

/**
 * enum rpmb_type - type of underlying storage technology
 *
 * @RPMB_TYPE_EMMC  : emmc (JESD84-B50.1)
 * @RPMB_TYPE_UFS   : UFS (JESD220)
 * @RPMB_TYPE_NVME  : NVM Express
 */
enum rpmb_type {
	RPMB_TYPE_EMMC,
	RPMB_TYPE_UFS,
	RPMB_TYPE_NVME,
};

/**
 * struct rpmb_descr - RPMB description provided by the underlying block device
 *
 * @type             : block device type
 * @route_frames     : routes frames to and from the RPMB device
 * @dev_id           : unique device identifier read from the hardware
 * @dev_id_len       : length of unique device identifier
 * @reliable_wr_count: number of sectors that can be written in one access
 * @capacity         : capacity of the device in units of 128K
 *
 * @dev_id is intended to be used as input when deriving the authenticaion key.
 */
struct rpmb_descr {
	enum rpmb_type type;
	int (*route_frames)(struct device *dev, u8 *req, unsigned int req_len,
			    u8 *resp, unsigned int resp_len);
	u8 *dev_id;
	size_t dev_id_len;
	u16 reliable_wr_count;
	u16 capacity;
};

/**
 * struct rpmb_dev - device which can support RPMB partition
 *
 * @dev              : device
 * @id               : device_id
 * @list_node        : linked list node
 * @descr            : RPMB description
 */
struct rpmb_dev {
	struct device dev;
	int id;
	struct list_head list_node;
	struct rpmb_descr descr;
};

#define to_rpmb_dev(x)		container_of((x), struct rpmb_dev, dev)

/**
 * struct rpmb_frame - RPMB frame structure for authenticated access
 *
 * @stuff        : stuff bytes, a padding/reserved area of 196 bytes at the
 *                 beginning of the RPMB frame. They don’t carry meaningful
 *                 data but are required to make the frame exactly 512 bytes.
 * @key_mac      : The authentication key or the message authentication
 *                 code (MAC) depending on the request/response type.
 *                 The MAC will be delivered in the last (or the only)
 *                 block of data.
 * @data         : Data to be written or read by signed access.
 * @nonce        : Random number generated by the host for the requests
 *                 and copied to the response by the RPMB engine.
 * @write_counter: Counter value for the total amount of the successful
 *                 authenticated data write requests made by the host.
 * @addr         : Address of the data to be programmed to or read
 *                 from the RPMB. Address is the serial number of
 *                 the accessed block (half sector 256B).
 * @block_count  : Number of blocks (half sectors, 256B) requested to be
 *                 read/programmed.
 * @result       : Includes information about the status of the write counter
 *                 (valid, expired) and result of the access made to the RPMB.
 * @req_resp     : Defines the type of request and response to/from the memory.
 *
 * The stuff bytes and big-endian properties are modeled to fit to the spec.
 */
struct rpmb_frame {
	u8     stuff[196];
	u8     key_mac[32];
	u8     data[256];
	u8     nonce[16];
	__be32 write_counter;
	__be16 addr;
	__be16 block_count;
	__be16 result;
	__be16 req_resp;
};

#define RPMB_PROGRAM_KEY       0x1    /* Program RPMB Authentication Key */
#define RPMB_GET_WRITE_COUNTER 0x2    /* Read RPMB write counter */
#define RPMB_WRITE_DATA        0x3    /* Write data to RPMB partition */
#define RPMB_READ_DATA         0x4    /* Read data from RPMB partition */
#define RPMB_RESULT_READ       0x5    /* Read result request  (Internal) */

#if IS_ENABLED(CONFIG_RPMB)
struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev);
void rpmb_dev_put(struct rpmb_dev *rdev);
struct rpmb_dev *rpmb_dev_find_device(const void *data,
				      const struct rpmb_dev *start,
				      int (*match)(struct device *dev,
						   const void *data));
int rpmb_interface_register(struct class_interface *intf);
void rpmb_interface_unregister(struct class_interface *intf);
struct rpmb_dev *rpmb_dev_register(struct device *dev,
				   struct rpmb_descr *descr);
int rpmb_dev_unregister(struct rpmb_dev *rdev);

int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
		      unsigned int req_len, u8 *resp, unsigned int resp_len);

#else
static inline struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev)
{
	return NULL;
}

static inline void rpmb_dev_put(struct rpmb_dev *rdev) { }

static inline struct rpmb_dev *
rpmb_dev_find_device(const void *data, const struct rpmb_dev *start,
		     int (*match)(struct device *dev, const void *data))
{
	return NULL;
}

static inline int rpmb_interface_register(struct class_interface *intf)
{
	return -EOPNOTSUPP;
}

static inline void rpmb_interface_unregister(struct class_interface *intf)
{
}

static inline struct rpmb_dev *
rpmb_dev_register(struct device *dev, struct rpmb_descr *descr)
{
	return NULL;
}

static inline int rpmb_dev_unregister(struct rpmb_dev *dev)
{
	return 0;
}

static inline int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
				    unsigned int req_len, u8 *resp,
				    unsigned int resp_len)
{
	return -EOPNOTSUPP;
}
#endif /* CONFIG_RPMB */

#endif /* __RPMB_H__ */