| /* SPDX-License-Identifier: GPL-2.0-only */ | |
| /* | |
| * IEEE 802.11 defines | |
| * | |
| * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen | |
| * <jkmaline@cc.hut.fi> | |
| * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> | |
| * Copyright (c) 2005, Devicescape Software, Inc. | |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> | |
| * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH | |
| * Copyright (c) 2016 - 2017 Intel Deutschland GmbH | |
| * Copyright (c) 2018 - 2025 Intel Corporation | |
| */ | |
| #ifndef LINUX_IEEE80211_H | |
| #define LINUX_IEEE80211_H | |
| #include <linux/types.h> | |
| #include <linux/if_ether.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/bitfield.h> | |
| #include <asm/byteorder.h> | |
| #include <linux/unaligned.h> | |
| /* | |
| * DS bit usage | |
| * | |
| * TA = transmitter address | |
| * RA = receiver address | |
| * DA = destination address | |
| * SA = source address | |
| * | |
| * ToDS FromDS A1(RA) A2(TA) A3 A4 Use | |
| * ----------------------------------------------------------------- | |
| * 0 0 DA SA BSSID - IBSS/DLS | |
| * 0 1 DA BSSID SA - AP -> STA | |
| * 1 0 BSSID SA DA - AP <- STA | |
| * 1 1 RA TA DA SA unspecified (WDS) | |
| */ | |
| #define FCS_LEN 4 | |
| #define IEEE80211_FCTL_VERS 0x0003 | |
| #define IEEE80211_FCTL_FTYPE 0x000c | |
| #define IEEE80211_FCTL_STYPE 0x00f0 | |
| #define IEEE80211_FCTL_TODS 0x0100 | |
| #define IEEE80211_FCTL_FROMDS 0x0200 | |
| #define IEEE80211_FCTL_MOREFRAGS 0x0400 | |
| #define IEEE80211_FCTL_RETRY 0x0800 | |
| #define IEEE80211_FCTL_PM 0x1000 | |
| #define IEEE80211_FCTL_MOREDATA 0x2000 | |
| #define IEEE80211_FCTL_PROTECTED 0x4000 | |
| #define IEEE80211_FCTL_ORDER 0x8000 | |
| #define IEEE80211_FCTL_CTL_EXT 0x0f00 | |
| #define IEEE80211_SCTL_FRAG 0x000F | |
| #define IEEE80211_SCTL_SEQ 0xFFF0 | |
| #define IEEE80211_FTYPE_MGMT 0x0000 | |
| #define IEEE80211_FTYPE_CTL 0x0004 | |
| #define IEEE80211_FTYPE_DATA 0x0008 | |
| #define IEEE80211_FTYPE_EXT 0x000c | |
| /* management */ | |
| #define IEEE80211_STYPE_ASSOC_REQ 0x0000 | |
| #define IEEE80211_STYPE_ASSOC_RESP 0x0010 | |
| #define IEEE80211_STYPE_REASSOC_REQ 0x0020 | |
| #define IEEE80211_STYPE_REASSOC_RESP 0x0030 | |
| #define IEEE80211_STYPE_PROBE_REQ 0x0040 | |
| #define IEEE80211_STYPE_PROBE_RESP 0x0050 | |
| #define IEEE80211_STYPE_BEACON 0x0080 | |
| #define IEEE80211_STYPE_ATIM 0x0090 | |
| #define IEEE80211_STYPE_DISASSOC 0x00A0 | |
| #define IEEE80211_STYPE_AUTH 0x00B0 | |
| #define IEEE80211_STYPE_DEAUTH 0x00C0 | |
| #define IEEE80211_STYPE_ACTION 0x00D0 | |
| /* control */ | |
| #define IEEE80211_STYPE_TRIGGER 0x0020 | |
| #define IEEE80211_STYPE_CTL_EXT 0x0060 | |
| #define IEEE80211_STYPE_BACK_REQ 0x0080 | |
| #define IEEE80211_STYPE_BACK 0x0090 | |
| #define IEEE80211_STYPE_PSPOLL 0x00A0 | |
| #define IEEE80211_STYPE_RTS 0x00B0 | |
| #define IEEE80211_STYPE_CTS 0x00C0 | |
| #define IEEE80211_STYPE_ACK 0x00D0 | |
| #define IEEE80211_STYPE_CFEND 0x00E0 | |
| #define IEEE80211_STYPE_CFENDACK 0x00F0 | |
| /* data */ | |
| #define IEEE80211_STYPE_DATA 0x0000 | |
| #define IEEE80211_STYPE_DATA_CFACK 0x0010 | |
| #define IEEE80211_STYPE_DATA_CFPOLL 0x0020 | |
| #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 | |
| #define IEEE80211_STYPE_NULLFUNC 0x0040 | |
| #define IEEE80211_STYPE_CFACK 0x0050 | |
| #define IEEE80211_STYPE_CFPOLL 0x0060 | |
| #define IEEE80211_STYPE_CFACKPOLL 0x0070 | |
| #define IEEE80211_STYPE_QOS_DATA 0x0080 | |
| #define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090 | |
| #define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0 | |
| #define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0 | |
| #define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0 | |
| #define IEEE80211_STYPE_QOS_CFACK 0x00D0 | |
| #define IEEE80211_STYPE_QOS_CFPOLL 0x00E0 | |
| #define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0 | |
| /* extension, added by 802.11ad */ | |
| #define IEEE80211_STYPE_DMG_BEACON 0x0000 | |
| #define IEEE80211_STYPE_S1G_BEACON 0x0010 | |
| /* bits unique to S1G beacon */ | |
| #define IEEE80211_S1G_BCN_NEXT_TBTT 0x100 | |
| #define IEEE80211_S1G_BCN_CSSID 0x200 | |
| #define IEEE80211_S1G_BCN_ANO 0x400 | |
| /* see 802.11ah-2016 9.9 NDP CMAC frames */ | |
| #define IEEE80211_S1G_1MHZ_NDP_BITS 25 | |
| #define IEEE80211_S1G_1MHZ_NDP_BYTES 4 | |
| #define IEEE80211_S1G_2MHZ_NDP_BITS 37 | |
| #define IEEE80211_S1G_2MHZ_NDP_BYTES 5 | |
| #define IEEE80211_NDP_FTYPE_CTS 0 | |
| #define IEEE80211_NDP_FTYPE_CF_END 0 | |
| #define IEEE80211_NDP_FTYPE_PS_POLL 1 | |
| #define IEEE80211_NDP_FTYPE_ACK 2 | |
| #define IEEE80211_NDP_FTYPE_PS_POLL_ACK 3 | |
| #define IEEE80211_NDP_FTYPE_BA 4 | |
| #define IEEE80211_NDP_FTYPE_BF_REPORT_POLL 5 | |
| #define IEEE80211_NDP_FTYPE_PAGING 6 | |
| #define IEEE80211_NDP_FTYPE_PREQ 7 | |
| #define SM64(f, v) ((((u64)v) << f##_S) & f) | |
| /* NDP CMAC frame fields */ | |
| #define IEEE80211_NDP_FTYPE 0x0000000000000007 | |
| #define IEEE80211_NDP_FTYPE_S 0x0000000000000000 | |
| /* 1M Probe Request 11ah 9.9.3.1.1 */ | |
| #define IEEE80211_NDP_1M_PREQ_ANO 0x0000000000000008 | |
| #define IEEE80211_NDP_1M_PREQ_ANO_S 3 | |
| #define IEEE80211_NDP_1M_PREQ_CSSID 0x00000000000FFFF0 | |
| #define IEEE80211_NDP_1M_PREQ_CSSID_S 4 | |
| #define IEEE80211_NDP_1M_PREQ_RTYPE 0x0000000000100000 | |
| #define IEEE80211_NDP_1M_PREQ_RTYPE_S 20 | |
| #define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000 | |
| #define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000 | |
| /* 2M Probe Request 11ah 9.9.3.1.2 */ | |
| #define IEEE80211_NDP_2M_PREQ_ANO 0x0000000000000008 | |
| #define IEEE80211_NDP_2M_PREQ_ANO_S 3 | |
| #define IEEE80211_NDP_2M_PREQ_CSSID 0x0000000FFFFFFFF0 | |
| #define IEEE80211_NDP_2M_PREQ_CSSID_S 4 | |
| #define IEEE80211_NDP_2M_PREQ_RTYPE 0x0000001000000000 | |
| #define IEEE80211_NDP_2M_PREQ_RTYPE_S 36 | |
| #define IEEE80211_ANO_NETTYPE_WILD 15 | |
| /* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */ | |
| #define IEEE80211_CTL_EXT_POLL 0x2000 | |
| #define IEEE80211_CTL_EXT_SPR 0x3000 | |
| #define IEEE80211_CTL_EXT_GRANT 0x4000 | |
| #define IEEE80211_CTL_EXT_DMG_CTS 0x5000 | |
| #define IEEE80211_CTL_EXT_DMG_DTS 0x6000 | |
| #define IEEE80211_CTL_EXT_SSW 0x8000 | |
| #define IEEE80211_CTL_EXT_SSW_FBACK 0x9000 | |
| #define IEEE80211_CTL_EXT_SSW_ACK 0xa000 | |
| #define IEEE80211_SN_MASK ((IEEE80211_SCTL_SEQ) >> 4) | |
| #define IEEE80211_MAX_SN IEEE80211_SN_MASK | |
| #define IEEE80211_SN_MODULO (IEEE80211_MAX_SN + 1) | |
| /* PV1 Layout IEEE 802.11-2020 9.8.3.1 */ | |
| #define IEEE80211_PV1_FCTL_VERS 0x0003 | |
| #define IEEE80211_PV1_FCTL_FTYPE 0x001c | |
| #define IEEE80211_PV1_FCTL_STYPE 0x00e0 | |
| #define IEEE80211_PV1_FCTL_FROMDS 0x0100 | |
| #define IEEE80211_PV1_FCTL_MOREFRAGS 0x0200 | |
| #define IEEE80211_PV1_FCTL_PM 0x0400 | |
| #define IEEE80211_PV1_FCTL_MOREDATA 0x0800 | |
| #define IEEE80211_PV1_FCTL_PROTECTED 0x1000 | |
| #define IEEE80211_PV1_FCTL_END_SP 0x2000 | |
| #define IEEE80211_PV1_FCTL_RELAYED 0x4000 | |
| #define IEEE80211_PV1_FCTL_ACK_POLICY 0x8000 | |
| #define IEEE80211_PV1_FCTL_CTL_EXT 0x0f00 | |
| static inline bool ieee80211_sn_less(u16 sn1, u16 sn2) | |
| { | |
| return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1); | |
| } | |
| static inline bool ieee80211_sn_less_eq(u16 sn1, u16 sn2) | |
| { | |
| return ((sn2 - sn1) & IEEE80211_SN_MASK) <= (IEEE80211_SN_MODULO >> 1); | |
| } | |
| static inline u16 ieee80211_sn_add(u16 sn1, u16 sn2) | |
| { | |
| return (sn1 + sn2) & IEEE80211_SN_MASK; | |
| } | |
| static inline u16 ieee80211_sn_inc(u16 sn) | |
| { | |
| return ieee80211_sn_add(sn, 1); | |
| } | |
| static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) | |
| { | |
| return (sn1 - sn2) & IEEE80211_SN_MASK; | |
| } | |
| #define IEEE80211_SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) | |
| #define IEEE80211_SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) | |
| /* miscellaneous IEEE 802.11 constants */ | |
| #define IEEE80211_MAX_FRAG_THRESHOLD 2352 | |
| #define IEEE80211_MAX_RTS_THRESHOLD 2353 | |
| #define IEEE80211_MAX_AID 2007 | |
| #define IEEE80211_MAX_AID_S1G 8191 | |
| #define IEEE80211_MAX_TIM_LEN 251 | |
| #define IEEE80211_MAX_MESH_PEERINGS 63 | |
| /* S1G encoding types */ | |
| #define IEEE80211_S1G_TIM_ENC_MODE_BLOCK 0 | |
| #define IEEE80211_S1G_TIM_ENC_MODE_SINGLE 1 | |
| #define IEEE80211_S1G_TIM_ENC_MODE_OLB 2 | |
| /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section | |
| 6.2.1.1.2. | |
| 802.11e clarifies the figure in section 7.1.2. The frame body is | |
| up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */ | |
| #define IEEE80211_MAX_DATA_LEN 2304 | |
| /* 802.11ad extends maximum MSDU size for DMG (freq > 40Ghz) networks | |
| * to 7920 bytes, see 8.2.3 General frame format | |
| */ | |
| #define IEEE80211_MAX_DATA_LEN_DMG 7920 | |
| /* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */ | |
| #define IEEE80211_MAX_FRAME_LEN 2352 | |
| #define IEEE80211_MAX_SSID_LEN 32 | |
| #define IEEE80211_FIRST_TSPEC_TSID 8 | |
| #define IEEE80211_NUM_TIDS 16 | |
| /* number of user priorities 802.11 uses */ | |
| #define IEEE80211_NUM_UPS 8 | |
| /* number of ACs */ | |
| #define IEEE80211_NUM_ACS 4 | |
| #define IEEE80211_QOS_CTL_LEN 2 | |
| /* 1d tag mask */ | |
| #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 | |
| /* TID mask */ | |
| #define IEEE80211_QOS_CTL_TID_MASK 0x000f | |
| /* EOSP */ | |
| #define IEEE80211_QOS_CTL_EOSP 0x0010 | |
| /* ACK policy */ | |
| #define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL 0x0000 | |
| #define IEEE80211_QOS_CTL_ACK_POLICY_NOACK 0x0020 | |
| #define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL 0x0040 | |
| #define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060 | |
| #define IEEE80211_QOS_CTL_ACK_POLICY_MASK 0x0060 | |
| /* A-MSDU 802.11n */ | |
| #define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080 | |
| /* Mesh Control 802.11s */ | |
| #define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100 | |
| /* Mesh Power Save Level */ | |
| #define IEEE80211_QOS_CTL_MESH_PS_LEVEL 0x0200 | |
| /* Mesh Receiver Service Period Initiated */ | |
| #define IEEE80211_QOS_CTL_RSPI 0x0400 | |
| /* U-APSD queue for WMM IEs sent by AP */ | |
| #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) | |
| #define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f | |
| /* U-APSD queues for WMM IEs sent by STA */ | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO (1<<0) | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI (1<<1) | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK (1<<2) | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE (1<<3) | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK 0x0f | |
| /* U-APSD max SP length for WMM IEs sent by STA */ | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL 0x00 | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_SP_2 0x01 | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_SP_4 0x02 | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_SP_6 0x03 | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03 | |
| #define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5 | |
| /* trigger type within common_info of trigger frame */ | |
| #define IEEE80211_TRIGGER_TYPE_MASK 0xf | |
| #define IEEE80211_TRIGGER_TYPE_BASIC 0x0 | |
| #define IEEE80211_TRIGGER_TYPE_BFRP 0x1 | |
| #define IEEE80211_TRIGGER_TYPE_MU_BAR 0x2 | |
| #define IEEE80211_TRIGGER_TYPE_MU_RTS 0x3 | |
| #define IEEE80211_TRIGGER_TYPE_BSRP 0x4 | |
| #define IEEE80211_TRIGGER_TYPE_GCR_MU_BAR 0x5 | |
| #define IEEE80211_TRIGGER_TYPE_BQRP 0x6 | |
| #define IEEE80211_TRIGGER_TYPE_NFRP 0x7 | |
| /* UL-bandwidth within common_info of trigger frame */ | |
| #define IEEE80211_TRIGGER_ULBW_MASK 0xc0000 | |
| #define IEEE80211_TRIGGER_ULBW_20MHZ 0x0 | |
| #define IEEE80211_TRIGGER_ULBW_40MHZ 0x1 | |
| #define IEEE80211_TRIGGER_ULBW_80MHZ 0x2 | |
| #define IEEE80211_TRIGGER_ULBW_160_80P80MHZ 0x3 | |
| struct ieee80211_hdr { | |
| __le16 frame_control; | |
| __le16 duration_id; | |
| struct_group(addrs, | |
| u8 addr1[ETH_ALEN]; | |
| u8 addr2[ETH_ALEN]; | |
| u8 addr3[ETH_ALEN]; | |
| ); | |
| __le16 seq_ctrl; | |
| u8 addr4[ETH_ALEN]; | |
| } __packed __aligned(2); | |
| struct ieee80211_hdr_3addr { | |
| __le16 frame_control; | |
| __le16 duration_id; | |
| u8 addr1[ETH_ALEN]; | |
| u8 addr2[ETH_ALEN]; | |
| u8 addr3[ETH_ALEN]; | |
| __le16 seq_ctrl; | |
| } __packed __aligned(2); | |
| struct ieee80211_qos_hdr { | |
| __le16 frame_control; | |
| __le16 duration_id; | |
| u8 addr1[ETH_ALEN]; | |
| u8 addr2[ETH_ALEN]; | |
| u8 addr3[ETH_ALEN]; | |
| __le16 seq_ctrl; | |
| __le16 qos_ctrl; | |
| } __packed __aligned(2); | |
| struct ieee80211_qos_hdr_4addr { | |
| __le16 frame_control; | |
| __le16 duration_id; | |
| u8 addr1[ETH_ALEN]; | |
| u8 addr2[ETH_ALEN]; | |
| u8 addr3[ETH_ALEN]; | |
| __le16 seq_ctrl; | |
| u8 addr4[ETH_ALEN]; | |
| __le16 qos_ctrl; | |
| } __packed __aligned(2); | |
| struct ieee80211_trigger { | |
| __le16 frame_control; | |
| __le16 duration; | |
| u8 ra[ETH_ALEN]; | |
| u8 ta[ETH_ALEN]; | |
| __le64 common_info; | |
| u8 variable[]; | |
| } __packed __aligned(2); | |
| /** | |
| * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame has to-DS set | |
| */ | |
| static inline bool ieee80211_has_tods(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame has from-DS set | |
| */ | |
| static inline bool ieee80211_has_fromds(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not it's a 4-address frame (from-DS and to-DS set) | |
| */ | |
| static inline bool ieee80211_has_a4(__le16 fc) | |
| { | |
| __le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); | |
| return (fc & tmp) == tmp; | |
| } | |
| /** | |
| * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame has more fragments (more frags bit set) | |
| */ | |
| static inline bool ieee80211_has_morefrags(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the retry flag is set | |
| */ | |
| static inline bool ieee80211_has_retry(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the power management flag is set | |
| */ | |
| static inline bool ieee80211_has_pm(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the more data flag is set | |
| */ | |
| static inline bool ieee80211_has_moredata(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the protected flag is set | |
| */ | |
| static inline bool ieee80211_has_protected(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0; | |
| } | |
| /** | |
| * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the order flag is set | |
| */ | |
| static inline bool ieee80211_has_order(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0; | |
| } | |
| /** | |
| * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame type is management | |
| */ | |
| static inline bool ieee80211_is_mgmt(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT); | |
| } | |
| /** | |
| * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame type is control | |
| */ | |
| static inline bool ieee80211_is_ctl(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL); | |
| } | |
| /** | |
| * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a data frame | |
| */ | |
| static inline bool ieee80211_is_data(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA); | |
| } | |
| /** | |
| * ieee80211_is_ext - check if type is IEEE80211_FTYPE_EXT | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame type is extended | |
| */ | |
| static inline bool ieee80211_is_ext(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_EXT); | |
| } | |
| /** | |
| * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a QoS data frame | |
| */ | |
| static inline bool ieee80211_is_data_qos(__le16 fc) | |
| { | |
| /* | |
| * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need | |
| * to check the one bit | |
| */ | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA); | |
| } | |
| /** | |
| * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a QoS data frame that has data | |
| * (i.e. is not null data) | |
| */ | |
| static inline bool ieee80211_is_data_present(__le16 fc) | |
| { | |
| /* | |
| * mask with 0x40 and test that that bit is clear to only return true | |
| * for the data-containing substypes. | |
| */ | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA); | |
| } | |
| /** | |
| * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an association request | |
| */ | |
| static inline bool ieee80211_is_assoc_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ); | |
| } | |
| /** | |
| * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an association response | |
| */ | |
| static inline bool ieee80211_is_assoc_resp(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP); | |
| } | |
| /** | |
| * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a reassociation request | |
| */ | |
| static inline bool ieee80211_is_reassoc_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ); | |
| } | |
| /** | |
| * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a reassociation response | |
| */ | |
| static inline bool ieee80211_is_reassoc_resp(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP); | |
| } | |
| /** | |
| * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a probe request | |
| */ | |
| static inline bool ieee80211_is_probe_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ); | |
| } | |
| /** | |
| * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a probe response | |
| */ | |
| static inline bool ieee80211_is_probe_resp(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); | |
| } | |
| /** | |
| * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a (regular, not S1G) beacon | |
| */ | |
| static inline bool ieee80211_is_beacon(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); | |
| } | |
| /** | |
| * ieee80211_is_s1g_beacon - check if IEEE80211_FTYPE_EXT && | |
| * IEEE80211_STYPE_S1G_BEACON | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an S1G beacon | |
| */ | |
| static inline bool ieee80211_is_s1g_beacon(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | | |
| IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON); | |
| } | |
| /** | |
| * ieee80211_s1g_has_next_tbtt - check if IEEE80211_S1G_BCN_NEXT_TBTT | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame contains the variable-length | |
| * next TBTT field | |
| */ | |
| static inline bool ieee80211_s1g_has_next_tbtt(__le16 fc) | |
| { | |
| return ieee80211_is_s1g_beacon(fc) && | |
| (fc & cpu_to_le16(IEEE80211_S1G_BCN_NEXT_TBTT)); | |
| } | |
| /** | |
| * ieee80211_s1g_has_ano - check if IEEE80211_S1G_BCN_ANO | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame contains the variable-length | |
| * ANO field | |
| */ | |
| static inline bool ieee80211_s1g_has_ano(__le16 fc) | |
| { | |
| return ieee80211_is_s1g_beacon(fc) && | |
| (fc & cpu_to_le16(IEEE80211_S1G_BCN_ANO)); | |
| } | |
| /** | |
| * ieee80211_s1g_has_cssid - check if IEEE80211_S1G_BCN_CSSID | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame contains the variable-length | |
| * compressed SSID field | |
| */ | |
| static inline bool ieee80211_s1g_has_cssid(__le16 fc) | |
| { | |
| return ieee80211_is_s1g_beacon(fc) && | |
| (fc & cpu_to_le16(IEEE80211_S1G_BCN_CSSID)); | |
| } | |
| /** | |
| * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an ATIM frame | |
| */ | |
| static inline bool ieee80211_is_atim(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM); | |
| } | |
| /** | |
| * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a disassociation frame | |
| */ | |
| static inline bool ieee80211_is_disassoc(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC); | |
| } | |
| /** | |
| * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an authentication frame | |
| */ | |
| static inline bool ieee80211_is_auth(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); | |
| } | |
| /** | |
| * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a deauthentication frame | |
| */ | |
| static inline bool ieee80211_is_deauth(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH); | |
| } | |
| /** | |
| * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an action frame | |
| */ | |
| static inline bool ieee80211_is_action(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION); | |
| } | |
| /** | |
| * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a block-ACK request frame | |
| */ | |
| static inline bool ieee80211_is_back_req(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ); | |
| } | |
| /** | |
| * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a block-ACK frame | |
| */ | |
| static inline bool ieee80211_is_back(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK); | |
| } | |
| /** | |
| * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a PS-poll frame | |
| */ | |
| static inline bool ieee80211_is_pspoll(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); | |
| } | |
| /** | |
| * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an RTS frame | |
| */ | |
| static inline bool ieee80211_is_rts(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); | |
| } | |
| /** | |
| * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a CTS frame | |
| */ | |
| static inline bool ieee80211_is_cts(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); | |
| } | |
| /** | |
| * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is an ACK frame | |
| */ | |
| static inline bool ieee80211_is_ack(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK); | |
| } | |
| /** | |
| * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a CF-end frame | |
| */ | |
| static inline bool ieee80211_is_cfend(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND); | |
| } | |
| /** | |
| * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a CF-end-ack frame | |
| */ | |
| static inline bool ieee80211_is_cfendack(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK); | |
| } | |
| /** | |
| * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a nullfunc frame | |
| */ | |
| static inline bool ieee80211_is_nullfunc(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC); | |
| } | |
| /** | |
| * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a QoS nullfunc frame | |
| */ | |
| static inline bool ieee80211_is_qos_nullfunc(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC); | |
| } | |
| /** | |
| * ieee80211_is_trigger - check if frame is trigger frame | |
| * @fc: frame control field in little-endian byteorder | |
| * Return: whether or not the frame is a trigger frame | |
| */ | |
| static inline bool ieee80211_is_trigger(__le16 fc) | |
| { | |
| return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_TRIGGER); | |
| } | |
| /** | |
| * ieee80211_is_any_nullfunc - check if frame is regular or QoS nullfunc frame | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: whether or not the frame is a nullfunc or QoS nullfunc frame | |
| */ | |
| static inline bool ieee80211_is_any_nullfunc(__le16 fc) | |
| { | |
| return (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)); | |
| } | |
| /** | |
| * ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set | |
| * @seq_ctrl: frame sequence control bytes in little-endian byteorder | |
| * Return: whether or not the frame is the first fragment (also true if | |
| * it's not fragmented at all) | |
| */ | |
| static inline bool ieee80211_is_first_frag(__le16 seq_ctrl) | |
| { | |
| return (seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0; | |
| } | |
| /** | |
| * ieee80211_is_frag - check if a frame is a fragment | |
| * @hdr: 802.11 header of the frame | |
| * Return: whether or not the frame is a fragment | |
| */ | |
| static inline bool ieee80211_is_frag(struct ieee80211_hdr *hdr) | |
| { | |
| return ieee80211_has_morefrags(hdr->frame_control) || | |
| hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG); | |
| } | |
| static inline u16 ieee80211_get_sn(struct ieee80211_hdr *hdr) | |
| { | |
| return le16_get_bits(hdr->seq_ctrl, IEEE80211_SCTL_SEQ); | |
| } | |
| /** | |
| * struct ieee80211_quiet_ie - Quiet element | |
| * @count: Quiet Count | |
| * @period: Quiet Period | |
| * @duration: Quiet Duration | |
| * @offset: Quiet Offset | |
| * | |
| * This structure represents the payload of the "Quiet element" as | |
| * described in IEEE Std 802.11-2020 section 9.4.2.22. | |
| */ | |
| struct ieee80211_quiet_ie { | |
| u8 count; | |
| u8 period; | |
| __le16 duration; | |
| __le16 offset; | |
| } __packed; | |
| /** | |
| * struct ieee80211_msrment_ie - Measurement element | |
| * @token: Measurement Token | |
| * @mode: Measurement Report Mode | |
| * @type: Measurement Type | |
| * @request: Measurement Request or Measurement Report | |
| * | |
| * This structure represents the payload of both the "Measurement | |
| * Request element" and the "Measurement Report element" as described | |
| * in IEEE Std 802.11-2020 sections 9.4.2.20 and 9.4.2.21. | |
| */ | |
| struct ieee80211_msrment_ie { | |
| u8 token; | |
| u8 mode; | |
| u8 type; | |
| u8 request[]; | |
| } __packed; | |
| /** | |
| * struct ieee80211_channel_sw_ie - Channel Switch Announcement element | |
| * @mode: Channel Switch Mode | |
| * @new_ch_num: New Channel Number | |
| * @count: Channel Switch Count | |
| * | |
| * This structure represents the payload of the "Channel Switch | |
| * Announcement element" as described in IEEE Std 802.11-2020 section | |
| * 9.4.2.18. | |
| */ | |
| struct ieee80211_channel_sw_ie { | |
| u8 mode; | |
| u8 new_ch_num; | |
| u8 count; | |
| } __packed; | |
| /** | |
| * struct ieee80211_ext_chansw_ie - Extended Channel Switch Announcement element | |
| * @mode: Channel Switch Mode | |
| * @new_operating_class: New Operating Class | |
| * @new_ch_num: New Channel Number | |
| * @count: Channel Switch Count | |
| * | |
| * This structure represents the "Extended Channel Switch Announcement | |
| * element" as described in IEEE Std 802.11-2020 section 9.4.2.52. | |
| */ | |
| struct ieee80211_ext_chansw_ie { | |
| u8 mode; | |
| u8 new_operating_class; | |
| u8 new_ch_num; | |
| u8 count; | |
| } __packed; | |
| /** | |
| * struct ieee80211_sec_chan_offs_ie - secondary channel offset IE | |
| * @sec_chan_offs: secondary channel offset, uses IEEE80211_HT_PARAM_CHA_SEC_* | |
| * values here | |
| * This structure represents the "Secondary Channel Offset element" | |
| */ | |
| struct ieee80211_sec_chan_offs_ie { | |
| u8 sec_chan_offs; | |
| } __packed; | |
| /** | |
| * struct ieee80211_wide_bw_chansw_ie - wide bandwidth channel switch IE | |
| * @new_channel_width: New Channel Width | |
| * @new_center_freq_seg0: New Channel Center Frequency Segment 0 | |
| * @new_center_freq_seg1: New Channel Center Frequency Segment 1 | |
| * | |
| * This structure represents the payload of the "Wide Bandwidth | |
| * Channel Switch element" as described in IEEE Std 802.11-2020 | |
| * section 9.4.2.160. | |
| */ | |
| struct ieee80211_wide_bw_chansw_ie { | |
| u8 new_channel_width; | |
| u8 new_center_freq_seg0, new_center_freq_seg1; | |
| } __packed; | |
| /** | |
| * struct ieee80211_tim_ie - Traffic Indication Map information element | |
| * @dtim_count: DTIM Count | |
| * @dtim_period: DTIM Period | |
| * @bitmap_ctrl: Bitmap Control | |
| * @required_octet: "Syntatic sugar" to force the struct size to the | |
| * minimum valid size when carried in a non-S1G PPDU | |
| * @virtual_map: Partial Virtual Bitmap | |
| * | |
| * This structure represents the payload of the "TIM element" as | |
| * described in IEEE Std 802.11-2020 section 9.4.2.5. Note that this | |
| * definition is only applicable when the element is carried in a | |
| * non-S1G PPDU. When the TIM is carried in an S1G PPDU, the Bitmap | |
| * Control and Partial Virtual Bitmap may not be present. | |
| */ | |
| struct ieee80211_tim_ie { | |
| u8 dtim_count; | |
| u8 dtim_period; | |
| u8 bitmap_ctrl; | |
| union { | |
| u8 required_octet; | |
| DECLARE_FLEX_ARRAY(u8, virtual_map); | |
| }; | |
| } __packed; | |
| /** | |
| * enum ieee80211_s1g_chanwidth - S1G channel widths | |
| * These are defined in IEEE802.11-2016ah Table 10-20 | |
| * as BSS Channel Width | |
| * | |
| * @IEEE80211_S1G_CHANWIDTH_1MHZ: 1MHz operating channel | |
| * @IEEE80211_S1G_CHANWIDTH_2MHZ: 2MHz operating channel | |
| * @IEEE80211_S1G_CHANWIDTH_4MHZ: 4MHz operating channel | |
| * @IEEE80211_S1G_CHANWIDTH_8MHZ: 8MHz operating channel | |
| * @IEEE80211_S1G_CHANWIDTH_16MHZ: 16MHz operating channel | |
| */ | |
| enum ieee80211_s1g_chanwidth { | |
| IEEE80211_S1G_CHANWIDTH_1MHZ = 0, | |
| IEEE80211_S1G_CHANWIDTH_2MHZ = 1, | |
| IEEE80211_S1G_CHANWIDTH_4MHZ = 3, | |
| IEEE80211_S1G_CHANWIDTH_8MHZ = 7, | |
| IEEE80211_S1G_CHANWIDTH_16MHZ = 15, | |
| }; | |
| /** | |
| * enum ieee80211_s1g_pri_chanwidth - S1G primary channel widths | |
| * described in IEEE80211-2024 Table 10-39. | |
| * | |
| * @IEEE80211_S1G_PRI_CHANWIDTH_2MHZ: 2MHz primary channel | |
| * @IEEE80211_S1G_PRI_CHANWIDTH_1MHZ: 1MHz primary channel | |
| */ | |
| enum ieee80211_s1g_pri_chanwidth { | |
| IEEE80211_S1G_PRI_CHANWIDTH_2MHZ = 0, | |
| IEEE80211_S1G_PRI_CHANWIDTH_1MHZ = 1, | |
| }; | |
| #define WLAN_SA_QUERY_TR_ID_LEN 2 | |
| #define WLAN_MEMBERSHIP_LEN 8 | |
| #define WLAN_USER_POSITION_LEN 16 | |
| /** | |
| * struct ieee80211_tpc_report_ie - TPC Report element | |
| * @tx_power: Transmit Power | |
| * @link_margin: Link Margin | |
| * | |
| * This structure represents the payload of the "TPC Report element" as | |
| * described in IEEE Std 802.11-2020 section 9.4.2.16. | |
| */ | |
| struct ieee80211_tpc_report_ie { | |
| u8 tx_power; | |
| u8 link_margin; | |
| } __packed; | |
| #define IEEE80211_ADDBA_EXT_FRAG_LEVEL_MASK GENMASK(2, 1) | |
| #define IEEE80211_ADDBA_EXT_FRAG_LEVEL_SHIFT 1 | |
| #define IEEE80211_ADDBA_EXT_NO_FRAG BIT(0) | |
| #define IEEE80211_ADDBA_EXT_BUF_SIZE_MASK GENMASK(7, 5) | |
| #define IEEE80211_ADDBA_EXT_BUF_SIZE_SHIFT 10 | |
| struct ieee80211_addba_ext_ie { | |
| u8 data; | |
| } __packed; | |
| /** | |
| * struct ieee80211_s1g_bcn_compat_ie - S1G Beacon Compatibility element | |
| * @compat_info: Compatibility Information | |
| * @beacon_int: Beacon Interval | |
| * @tsf_completion: TSF Completion | |
| * | |
| * This structure represents the payload of the "S1G Beacon | |
| * Compatibility element" as described in IEEE Std 802.11-2020 section | |
| * 9.4.2.196. | |
| */ | |
| struct ieee80211_s1g_bcn_compat_ie { | |
| __le16 compat_info; | |
| __le16 beacon_int; | |
| __le32 tsf_completion; | |
| } __packed; | |
| /** | |
| * struct ieee80211_s1g_oper_ie - S1G Operation element | |
| * @ch_width: S1G Operation Information Channel Width | |
| * @oper_class: S1G Operation Information Operating Class | |
| * @primary_ch: S1G Operation Information Primary Channel Number | |
| * @oper_ch: S1G Operation Information Channel Center Frequency | |
| * @basic_mcs_nss: Basic S1G-MCS and NSS Set | |
| * | |
| * This structure represents the payload of the "S1G Operation | |
| * element" as described in IEEE Std 802.11-2020 section 9.4.2.212. | |
| */ | |
| struct ieee80211_s1g_oper_ie { | |
| u8 ch_width; | |
| u8 oper_class; | |
| u8 primary_ch; | |
| u8 oper_ch; | |
| __le16 basic_mcs_nss; | |
| } __packed; | |
| /** | |
| * struct ieee80211_aid_response_ie - AID Response element | |
| * @aid: AID/Group AID | |
| * @switch_count: AID Switch Count | |
| * @response_int: AID Response Interval | |
| * | |
| * This structure represents the payload of the "AID Response element" | |
| * as described in IEEE Std 802.11-2020 section 9.4.2.194. | |
| */ | |
| struct ieee80211_aid_response_ie { | |
| __le16 aid; | |
| u8 switch_count; | |
| __le16 response_int; | |
| } __packed; | |
| struct ieee80211_s1g_cap { | |
| u8 capab_info[10]; | |
| u8 supp_mcs_nss[5]; | |
| } __packed; | |
| struct ieee80211_ext { | |
| __le16 frame_control; | |
| __le16 duration; | |
| union { | |
| struct { | |
| u8 sa[ETH_ALEN]; | |
| __le32 timestamp; | |
| u8 change_seq; | |
| u8 variable[]; | |
| } __packed s1g_beacon; | |
| } u; | |
| } __packed __aligned(2); | |
| /** | |
| * ieee80211_s1g_optional_len - determine length of optional S1G beacon fields | |
| * @fc: frame control bytes in little-endian byteorder | |
| * Return: total length in bytes of the optional fixed-length fields | |
| * | |
| * S1G beacons may contain up to three optional fixed-length fields that | |
| * precede the variable-length elements. Whether these fields are present | |
| * is indicated by flags in the frame control field. | |
| * | |
| * From IEEE 802.11-2024 section 9.3.4.3: | |
| * - Next TBTT field may be 0 or 3 bytes | |
| * - Short SSID field may be 0 or 4 bytes | |
| * - Access Network Options (ANO) field may be 0 or 1 byte | |
| */ | |
| static inline size_t | |
| ieee80211_s1g_optional_len(__le16 fc) | |
| { | |
| size_t len = 0; | |
| if (ieee80211_s1g_has_next_tbtt(fc)) | |
| len += 3; | |
| if (ieee80211_s1g_has_cssid(fc)) | |
| len += 4; | |
| if (ieee80211_s1g_has_ano(fc)) | |
| len += 1; | |
| return len; | |
| } | |
| /** | |
| * struct ieee80211_bss_load_elem - BSS Load elemen | |
| * | |
| * Defined in section 9.4.2.26 in IEEE 802.11-REVme D4.1 | |
| * | |
| * @sta_count: total number of STAs currently associated with the AP. | |
| * @channel_util: Percentage of time that the access point sensed the channel | |
| * was busy. This value is in range [0, 255], the highest value means | |
| * 100% busy. | |
| * @avail_admission_capa: remaining amount of medium time used for admission | |
| * control. | |
| */ | |
| struct ieee80211_bss_load_elem { | |
| __le16 sta_count; | |
| u8 channel_util; | |
| __le16 avail_admission_capa; | |
| } __packed; | |
| struct ieee80211_mgmt { | |
| __le16 frame_control; | |
| __le16 duration; | |
| u8 da[ETH_ALEN]; | |
| u8 sa[ETH_ALEN]; | |
| u8 bssid[ETH_ALEN]; | |
| __le16 seq_ctrl; | |
| union { | |
| struct { | |
| __le16 auth_alg; | |
| __le16 auth_transaction; | |
| __le16 status_code; | |
| /* possibly followed by Challenge text */ | |
| u8 variable[]; | |
| } __packed auth; | |
| struct { | |
| __le16 reason_code; | |
| } __packed deauth; | |
| struct { | |
| __le16 capab_info; | |
| __le16 listen_interval; | |
| /* followed by SSID and Supported rates */ | |
| u8 variable[]; | |
| } __packed assoc_req; | |
| struct { | |
| __le16 capab_info; | |
| __le16 status_code; | |
| __le16 aid; | |
| /* followed by Supported rates */ | |
| u8 variable[]; | |
| } __packed assoc_resp, reassoc_resp; | |
| struct { | |
| __le16 capab_info; | |
| __le16 status_code; | |
| u8 variable[]; | |
| } __packed s1g_assoc_resp, s1g_reassoc_resp; | |
| struct { | |
| __le16 capab_info; | |
| __le16 listen_interval; | |
| u8 current_ap[ETH_ALEN]; | |
| /* followed by SSID and Supported rates */ | |
| u8 variable[]; | |
| } __packed reassoc_req; | |
| struct { | |
| __le16 reason_code; | |
| } __packed disassoc; | |
| struct { | |
| __le64 timestamp; | |
| __le16 beacon_int; | |
| __le16 capab_info; | |
| /* followed by some of SSID, Supported rates, | |
| * FH Params, DS Params, CF Params, IBSS Params, TIM */ | |
| u8 variable[]; | |
| } __packed beacon; | |
| struct { | |
| /* only variable items: SSID, Supported rates */ | |
| DECLARE_FLEX_ARRAY(u8, variable); | |
| } __packed probe_req; | |
| struct { | |
| __le64 timestamp; | |
| __le16 beacon_int; | |
| __le16 capab_info; | |
| /* followed by some of SSID, Supported rates, | |
| * FH Params, DS Params, CF Params, IBSS Params */ | |
| u8 variable[]; | |
| } __packed probe_resp; | |
| struct { | |
| u8 category; | |
| union { | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 status_code; | |
| u8 variable[]; | |
| } __packed wme_action; | |
| struct{ | |
| u8 action_code; | |
| u8 variable[]; | |
| } __packed chan_switch; | |
| struct{ | |
| u8 action_code; | |
| struct ieee80211_ext_chansw_ie data; | |
| u8 variable[]; | |
| } __packed ext_chan_switch; | |
| struct{ | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 element_id; | |
| u8 length; | |
| struct ieee80211_msrment_ie msr_elem; | |
| } __packed measurement; | |
| struct{ | |
| u8 action_code; | |
| u8 dialog_token; | |
| __le16 capab; | |
| __le16 timeout; | |
| __le16 start_seq_num; | |
| /* followed by BA Extension */ | |
| u8 variable[]; | |
| } __packed addba_req; | |
| struct{ | |
| u8 action_code; | |
| u8 dialog_token; | |
| __le16 status; | |
| __le16 capab; | |
| __le16 timeout; | |
| /* followed by BA Extension */ | |
| u8 variable[]; | |
| } __packed addba_resp; | |
| struct{ | |
| u8 action_code; | |
| __le16 params; | |
| __le16 reason_code; | |
| } __packed delba; | |
| struct { | |
| u8 action_code; | |
| u8 variable[]; | |
| } __packed self_prot; | |
| struct{ | |
| u8 action_code; | |
| u8 variable[]; | |
| } __packed mesh_action; | |
| struct { | |
| u8 action; | |
| u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; | |
| } __packed sa_query; | |
| struct { | |
| u8 action; | |
| u8 smps_control; | |
| } __packed ht_smps; | |
| struct { | |
| u8 action_code; | |
| u8 chanwidth; | |
| } __packed ht_notify_cw; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| __le16 capability; | |
| u8 variable[]; | |
| } __packed tdls_discover_resp; | |
| struct { | |
| u8 action_code; | |
| u8 operating_mode; | |
| } __packed vht_opmode_notif; | |
| struct { | |
| u8 action_code; | |
| u8 membership[WLAN_MEMBERSHIP_LEN]; | |
| u8 position[WLAN_USER_POSITION_LEN]; | |
| } __packed vht_group_notif; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 tpc_elem_id; | |
| u8 tpc_elem_length; | |
| struct ieee80211_tpc_report_ie tpc; | |
| } __packed tpc_report; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 follow_up; | |
| u8 tod[6]; | |
| u8 toa[6]; | |
| __le16 tod_error; | |
| __le16 toa_error; | |
| u8 variable[]; | |
| } __packed ftm; | |
| struct { | |
| u8 action_code; | |
| u8 variable[]; | |
| } __packed s1g; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 follow_up; | |
| u32 tod; | |
| u32 toa; | |
| u8 max_tod_error; | |
| u8 max_toa_error; | |
| } __packed wnm_timing_msr; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 variable[]; | |
| } __packed ttlm_req; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| __le16 status_code; | |
| u8 variable[]; | |
| } __packed ttlm_res; | |
| struct { | |
| u8 action_code; | |
| } __packed ttlm_tear_down; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 variable[]; | |
| } __packed ml_reconf_req; | |
| struct { | |
| u8 action_code; | |
| u8 dialog_token; | |
| u8 count; | |
| u8 variable[]; | |
| } __packed ml_reconf_resp; | |
| struct { | |
| u8 action_code; | |
| u8 variable[]; | |
| } __packed epcs; | |
| } u; | |
| } __packed action; | |
| DECLARE_FLEX_ARRAY(u8, body); /* Generic frame body */ | |
| } u; | |
| } __packed __aligned(2); | |
| /* Supported rates membership selectors */ | |
| #define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 | |
| #define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126 | |
| #define BSS_MEMBERSHIP_SELECTOR_GLK 125 | |
| #define BSS_MEMBERSHIP_SELECTOR_EPD 124 | |
| #define BSS_MEMBERSHIP_SELECTOR_SAE_H2E 123 | |
| #define BSS_MEMBERSHIP_SELECTOR_HE_PHY 122 | |
| #define BSS_MEMBERSHIP_SELECTOR_EHT_PHY 121 | |
| #define BSS_MEMBERSHIP_SELECTOR_MIN BSS_MEMBERSHIP_SELECTOR_EHT_PHY | |
| /* mgmt header + 1 byte category code */ | |
| #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u) | |
| /* Management MIC information element (IEEE 802.11w) */ | |
| struct ieee80211_mmie { | |
| u8 element_id; | |
| u8 length; | |
| __le16 key_id; | |
| u8 sequence_number[6]; | |
| u8 mic[8]; | |
| } __packed; | |
| /* Management MIC information element (IEEE 802.11w) for GMAC and CMAC-256 */ | |
| struct ieee80211_mmie_16 { | |
| u8 element_id; | |
| u8 length; | |
| __le16 key_id; | |
| u8 sequence_number[6]; | |
| u8 mic[16]; | |
| } __packed; | |
| struct ieee80211_vendor_ie { | |
| u8 element_id; | |
| u8 len; | |
| u8 oui[3]; | |
| u8 oui_type; | |
| } __packed; | |
| struct ieee80211_wmm_ac_param { | |
| u8 aci_aifsn; /* AIFSN, ACM, ACI */ | |
| u8 cw; /* ECWmin, ECWmax (CW = 2^ECW - 1) */ | |
| __le16 txop_limit; | |
| } __packed; | |
| struct ieee80211_wmm_param_ie { | |
| u8 element_id; /* Element ID: 221 (0xdd); */ | |
| u8 len; /* Length: 24 */ | |
| /* required fields for WMM version 1 */ | |
| u8 oui[3]; /* 00:50:f2 */ | |
| u8 oui_type; /* 2 */ | |
| u8 oui_subtype; /* 1 */ | |
| u8 version; /* 1 for WMM version 1.0 */ | |
| u8 qos_info; /* AP/STA specific QoS info */ | |
| u8 reserved; /* 0 */ | |
| /* AC_BE, AC_BK, AC_VI, AC_VO */ | |
| struct ieee80211_wmm_ac_param ac[4]; | |
| } __packed; | |
| /* Control frames */ | |
| struct ieee80211_rts { | |
| __le16 frame_control; | |
| __le16 duration; | |
| u8 ra[ETH_ALEN]; | |
| u8 ta[ETH_ALEN]; | |
| } __packed __aligned(2); | |
| struct ieee80211_cts { | |
| __le16 frame_control; | |
| __le16 duration; | |
| u8 ra[ETH_ALEN]; | |
| } __packed __aligned(2); | |
| struct ieee80211_pspoll { | |
| __le16 frame_control; | |
| __le16 aid; | |
| u8 bssid[ETH_ALEN]; | |
| u8 ta[ETH_ALEN]; | |
| } __packed __aligned(2); | |
| /* TDLS */ | |
| /* Channel switch timing */ | |
| struct ieee80211_ch_switch_timing { | |
| __le16 switch_time; | |
| __le16 switch_timeout; | |
| } __packed; | |
| /* Link-id information element */ | |
| struct ieee80211_tdls_lnkie { | |
| u8 ie_type; /* Link Identifier IE */ | |
| u8 ie_len; | |
| u8 bssid[ETH_ALEN]; | |
| u8 init_sta[ETH_ALEN]; | |
| u8 resp_sta[ETH_ALEN]; | |
| } __packed; | |
| struct ieee80211_tdls_data { | |
| u8 da[ETH_ALEN]; | |
| u8 sa[ETH_ALEN]; | |
| __be16 ether_type; | |
| u8 payload_type; | |
| u8 category; | |
| u8 action_code; | |
| union { | |
| struct { | |
| u8 dialog_token; | |
| __le16 capability; | |
| u8 variable[]; | |
| } __packed setup_req; | |
| struct { | |
| __le16 status_code; | |
| u8 dialog_token; | |
| __le16 capability; | |
| u8 variable[]; | |
| } __packed setup_resp; | |
| struct { | |
| __le16 status_code; | |
| u8 dialog_token; | |
| u8 variable[]; | |
| } __packed setup_cfm; | |
| struct { | |
| __le16 reason_code; | |
| u8 variable[]; | |
| } __packed teardown; | |
| struct { | |
| u8 dialog_token; | |
| u8 variable[]; | |
| } __packed discover_req; | |
| struct { | |
| u8 target_channel; | |
| u8 oper_class; | |
| u8 variable[]; | |
| } __packed chan_switch_req; | |
| struct { | |
| __le16 status_code; | |
| u8 variable[]; | |
| } __packed chan_switch_resp; | |
| } u; | |
| } __packed; | |
| /* | |
| * Peer-to-Peer IE attribute related definitions. | |
| */ | |
| /* | |
| * enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute. | |
| */ | |
| enum ieee80211_p2p_attr_id { | |
| IEEE80211_P2P_ATTR_STATUS = 0, | |
| IEEE80211_P2P_ATTR_MINOR_REASON, | |
| IEEE80211_P2P_ATTR_CAPABILITY, | |
| IEEE80211_P2P_ATTR_DEVICE_ID, | |
| IEEE80211_P2P_ATTR_GO_INTENT, | |
| IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT, | |
| IEEE80211_P2P_ATTR_LISTEN_CHANNEL, | |
| IEEE80211_P2P_ATTR_GROUP_BSSID, | |
| IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING, | |
| IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR, | |
| IEEE80211_P2P_ATTR_MANAGABILITY, | |
| IEEE80211_P2P_ATTR_CHANNEL_LIST, | |
| IEEE80211_P2P_ATTR_ABSENCE_NOTICE, | |
| IEEE80211_P2P_ATTR_DEVICE_INFO, | |
| IEEE80211_P2P_ATTR_GROUP_INFO, | |
| IEEE80211_P2P_ATTR_GROUP_ID, | |
| IEEE80211_P2P_ATTR_INTERFACE, | |
| IEEE80211_P2P_ATTR_OPER_CHANNEL, | |
| IEEE80211_P2P_ATTR_INVITE_FLAGS, | |
| /* 19 - 220: Reserved */ | |
| IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221, | |
| IEEE80211_P2P_ATTR_MAX | |
| }; | |
| /* Notice of Absence attribute - described in P2P spec 4.1.14 */ | |
| /* Typical max value used here */ | |
| #define IEEE80211_P2P_NOA_DESC_MAX 4 | |
| struct ieee80211_p2p_noa_desc { | |
| u8 count; | |
| __le32 duration; | |
| __le32 interval; | |
| __le32 start_time; | |
| } __packed; | |
| struct ieee80211_p2p_noa_attr { | |
| u8 index; | |
| u8 oppps_ctwindow; | |
| struct ieee80211_p2p_noa_desc desc[IEEE80211_P2P_NOA_DESC_MAX]; | |
| } __packed; | |
| #define IEEE80211_P2P_OPPPS_ENABLE_BIT BIT(7) | |
| #define IEEE80211_P2P_OPPPS_CTWINDOW_MASK 0x7F | |
| /* S1G Capabilities Information field */ | |
| #define IEEE80211_S1G_CAPABILITY_LEN 15 | |
| #define S1G_CAP0_S1G_LONG BIT(0) | |
| #define S1G_CAP0_SGI_1MHZ BIT(1) | |
| #define S1G_CAP0_SGI_2MHZ BIT(2) | |
| #define S1G_CAP0_SGI_4MHZ BIT(3) | |
| #define S1G_CAP0_SGI_8MHZ BIT(4) | |
| #define S1G_CAP0_SGI_16MHZ BIT(5) | |
| #define S1G_CAP0_SUPP_CH_WIDTH GENMASK(7, 6) | |
| #define S1G_SUPP_CH_WIDTH_2 0 | |
| #define S1G_SUPP_CH_WIDTH_4 1 | |
| #define S1G_SUPP_CH_WIDTH_8 2 | |
| #define S1G_SUPP_CH_WIDTH_16 3 | |
| #define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << FIELD_GET(S1G_CAP0_SUPP_CH_WIDTH, \ | |
| cap[0])) << 1) | |
| #define S1G_CAP1_RX_LDPC BIT(0) | |
| #define S1G_CAP1_TX_STBC BIT(1) | |
| #define S1G_CAP1_RX_STBC BIT(2) | |
| #define S1G_CAP1_SU_BFER BIT(3) | |
| #define S1G_CAP1_SU_BFEE BIT(4) | |
| #define S1G_CAP1_BFEE_STS GENMASK(7, 5) | |
| #define S1G_CAP2_SOUNDING_DIMENSIONS GENMASK(2, 0) | |
| #define S1G_CAP2_MU_BFER BIT(3) | |
| #define S1G_CAP2_MU_BFEE BIT(4) | |
| #define S1G_CAP2_PLUS_HTC_VHT BIT(5) | |
| #define S1G_CAP2_TRAVELING_PILOT GENMASK(7, 6) | |
| #define S1G_CAP3_RD_RESPONDER BIT(0) | |
| #define S1G_CAP3_HT_DELAYED_BA BIT(1) | |
| #define S1G_CAP3_MAX_MPDU_LEN BIT(2) | |
| #define S1G_CAP3_MAX_AMPDU_LEN_EXP GENMASK(4, 3) | |
| #define S1G_CAP3_MIN_MPDU_START GENMASK(7, 5) | |
| #define S1G_CAP4_UPLINK_SYNC BIT(0) | |
| #define S1G_CAP4_DYNAMIC_AID BIT(1) | |
| #define S1G_CAP4_BAT BIT(2) | |
| #define S1G_CAP4_TIME_ADE BIT(3) | |
| #define S1G_CAP4_NON_TIM BIT(4) | |
| #define S1G_CAP4_GROUP_AID BIT(5) | |
| #define S1G_CAP4_STA_TYPE GENMASK(7, 6) | |
| #define S1G_CAP5_CENT_AUTH_CONTROL BIT(0) | |
| #define S1G_CAP5_DIST_AUTH_CONTROL BIT(1) | |
| #define S1G_CAP5_AMSDU BIT(2) | |
| #define S1G_CAP5_AMPDU BIT(3) | |
| #define S1G_CAP5_ASYMMETRIC_BA BIT(4) | |
| #define S1G_CAP5_FLOW_CONTROL BIT(5) | |
| #define S1G_CAP5_SECTORIZED_BEAM GENMASK(7, 6) | |
| #define S1G_CAP6_OBSS_MITIGATION BIT(0) | |
| #define S1G_CAP6_FRAGMENT_BA BIT(1) | |
| #define S1G_CAP6_NDP_PS_POLL BIT(2) | |
| #define S1G_CAP6_RAW_OPERATION BIT(3) | |
| #define S1G_CAP6_PAGE_SLICING BIT(4) | |
| #define S1G_CAP6_TXOP_SHARING_IMP_ACK BIT(5) | |
| #define S1G_CAP6_VHT_LINK_ADAPT GENMASK(7, 6) | |
| #define S1G_CAP7_TACK_AS_PS_POLL BIT(0) | |
| #define S1G_CAP7_DUP_1MHZ BIT(1) | |
| #define S1G_CAP7_MCS_NEGOTIATION BIT(2) | |
| #define S1G_CAP7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3) | |
| #define S1G_CAP7_NDP_BFING_REPORT_POLL BIT(4) | |
| #define S1G_CAP7_UNSOLICITED_DYN_AID BIT(5) | |
| #define S1G_CAP7_SECTOR_TRAINING_OPERATION BIT(6) | |
| #define S1G_CAP7_TEMP_PS_MODE_SWITCH BIT(7) | |
| #define S1G_CAP8_TWT_GROUPING BIT(0) | |
| #define S1G_CAP8_BDT BIT(1) | |
| #define S1G_CAP8_COLOR GENMASK(4, 2) | |
| #define S1G_CAP8_TWT_REQUEST BIT(5) | |
| #define S1G_CAP8_TWT_RESPOND BIT(6) | |
| #define S1G_CAP8_PV1_FRAME BIT(7) | |
| #define S1G_CAP9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0) | |
| #define S1G_OPER_CH_WIDTH_PRIMARY BIT(0) | |
| #define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1) | |
| #define S1G_OPER_CH_PRIMARY_LOCATION BIT(5) | |
| #define S1G_2M_PRIMARY_LOCATION_LOWER 0 | |
| #define S1G_2M_PRIMARY_LOCATION_UPPER 1 | |
| #define LISTEN_INT_USF GENMASK(15, 14) | |
| #define LISTEN_INT_UI GENMASK(13, 0) | |
| #define IEEE80211_MAX_USF FIELD_MAX(LISTEN_INT_USF) | |
| #define IEEE80211_MAX_UI FIELD_MAX(LISTEN_INT_UI) | |
| /* Authentication algorithms */ | |
| #define WLAN_AUTH_OPEN 0 | |
| #define WLAN_AUTH_SHARED_KEY 1 | |
| #define WLAN_AUTH_FT 2 | |
| #define WLAN_AUTH_SAE 3 | |
| #define WLAN_AUTH_FILS_SK 4 | |
| #define WLAN_AUTH_FILS_SK_PFS 5 | |
| #define WLAN_AUTH_FILS_PK 6 | |
| #define WLAN_AUTH_LEAP 128 | |
| #define WLAN_AUTH_CHALLENGE_LEN 128 | |
| #define WLAN_CAPABILITY_ESS (1<<0) | |
| #define WLAN_CAPABILITY_IBSS (1<<1) | |
| /* | |
| * A mesh STA sets the ESS and IBSS capability bits to zero. | |
| * however, this holds true for p2p probe responses (in the p2p_find | |
| * phase) as well. | |
| */ | |
| #define WLAN_CAPABILITY_IS_STA_BSS(cap) \ | |
| (!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS))) | |
| #define WLAN_CAPABILITY_CF_POLLABLE (1<<2) | |
| #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) | |
| #define WLAN_CAPABILITY_PRIVACY (1<<4) | |
| #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) | |
| #define WLAN_CAPABILITY_PBCC (1<<6) | |
| #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) | |
| /* 802.11h */ | |
| #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) | |
| #define WLAN_CAPABILITY_QOS (1<<9) | |
| #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) | |
| #define WLAN_CAPABILITY_APSD (1<<11) | |
| #define WLAN_CAPABILITY_RADIO_MEASURE (1<<12) | |
| #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) | |
| #define WLAN_CAPABILITY_DEL_BACK (1<<14) | |
| #define WLAN_CAPABILITY_IMM_BACK (1<<15) | |
| /* DMG (60gHz) 802.11ad */ | |
| /* type - bits 0..1 */ | |
| #define WLAN_CAPABILITY_DMG_TYPE_MASK (3<<0) | |
| #define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */ | |
| #define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */ | |
| #define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */ | |
| #define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2) | |
| #define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) | |
| #define WLAN_CAPABILITY_DMG_PRIVACY (1<<4) | |
| #define WLAN_CAPABILITY_DMG_ECPAC (1<<5) | |
| #define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT (1<<8) | |
| #define WLAN_CAPABILITY_DMG_RADIO_MEASURE (1<<12) | |
| /* measurement */ | |
| #define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0) | |
| #define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1) | |
| #define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED (1<<2) | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC 0 | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_LCI 8 | |
| #define IEEE80211_SPCT_MSR_RPRT_TYPE_CIVIC 11 | |
| /* 802.11g ERP information element */ | |
| #define WLAN_ERP_NON_ERP_PRESENT (1<<0) | |
| #define WLAN_ERP_USE_PROTECTION (1<<1) | |
| #define WLAN_ERP_BARKER_PREAMBLE (1<<2) | |
| /* WLAN_ERP_BARKER_PREAMBLE values */ | |
| enum { | |
| WLAN_ERP_PREAMBLE_SHORT = 0, | |
| WLAN_ERP_PREAMBLE_LONG = 1, | |
| }; | |
| /* Band ID, 802.11ad #8.4.1.45 */ | |
| enum { | |
| IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */ | |
| IEEE80211_BANDID_SUB1 = 1, /* Sub-1 GHz (excluding TV white spaces) */ | |
| IEEE80211_BANDID_2G = 2, /* 2.4 GHz */ | |
| IEEE80211_BANDID_3G = 3, /* 3.6 GHz */ | |
| IEEE80211_BANDID_5G = 4, /* 4.9 and 5 GHz */ | |
| IEEE80211_BANDID_60G = 5, /* 60 GHz */ | |
| }; | |
| /* Status codes */ | |
| enum ieee80211_statuscode { | |
| WLAN_STATUS_SUCCESS = 0, | |
| WLAN_STATUS_UNSPECIFIED_FAILURE = 1, | |
| WLAN_STATUS_CAPS_UNSUPPORTED = 10, | |
| WLAN_STATUS_REASSOC_NO_ASSOC = 11, | |
| WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12, | |
| WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13, | |
| WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14, | |
| WLAN_STATUS_CHALLENGE_FAIL = 15, | |
| WLAN_STATUS_AUTH_TIMEOUT = 16, | |
| WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17, | |
| WLAN_STATUS_ASSOC_DENIED_RATES = 18, | |
| /* 802.11b */ | |
| WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19, | |
| WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20, | |
| WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21, | |
| /* 802.11h */ | |
| WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22, | |
| WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23, | |
| WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24, | |
| /* 802.11g */ | |
| WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25, | |
| WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26, | |
| /* 802.11w */ | |
| WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30, | |
| WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31, | |
| /* 802.11i */ | |
| WLAN_STATUS_INVALID_IE = 40, | |
| WLAN_STATUS_INVALID_GROUP_CIPHER = 41, | |
| WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42, | |
| WLAN_STATUS_INVALID_AKMP = 43, | |
| WLAN_STATUS_UNSUPP_RSN_VERSION = 44, | |
| WLAN_STATUS_INVALID_RSN_IE_CAP = 45, | |
| WLAN_STATUS_CIPHER_SUITE_REJECTED = 46, | |
| /* 802.11e */ | |
| WLAN_STATUS_UNSPECIFIED_QOS = 32, | |
| WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33, | |
| WLAN_STATUS_ASSOC_DENIED_LOWACK = 34, | |
| WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35, | |
| WLAN_STATUS_REQUEST_DECLINED = 37, | |
| WLAN_STATUS_INVALID_QOS_PARAM = 38, | |
| WLAN_STATUS_CHANGE_TSPEC = 39, | |
| WLAN_STATUS_WAIT_TS_DELAY = 47, | |
| WLAN_STATUS_NO_DIRECT_LINK = 48, | |
| WLAN_STATUS_STA_NOT_PRESENT = 49, | |
| WLAN_STATUS_STA_NOT_QSTA = 50, | |
| /* 802.11s */ | |
| WLAN_STATUS_ANTI_CLOG_REQUIRED = 76, | |
| WLAN_STATUS_FCG_NOT_SUPP = 78, | |
| WLAN_STATUS_STA_NO_TBTT = 78, | |
| /* 802.11ad */ | |
| WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39, | |
| WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47, | |
| WLAN_STATUS_REJECT_WITH_SCHEDULE = 83, | |
| WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86, | |
| WLAN_STATUS_PERFORMING_FST_NOW = 87, | |
| WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88, | |
| WLAN_STATUS_REJECT_U_PID_SETTING = 89, | |
| WLAN_STATUS_REJECT_DSE_BAND = 96, | |
| WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99, | |
| WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103, | |
| /* 802.11ai */ | |
| WLAN_STATUS_FILS_AUTHENTICATION_FAILURE = 112, | |
| WLAN_STATUS_UNKNOWN_AUTHENTICATION_SERVER = 113, | |
| WLAN_STATUS_SAE_HASH_TO_ELEMENT = 126, | |
| WLAN_STATUS_SAE_PK = 127, | |
| WLAN_STATUS_DENIED_TID_TO_LINK_MAPPING = 133, | |
| WLAN_STATUS_PREF_TID_TO_LINK_MAPPING_SUGGESTED = 134, | |
| }; | |
| /* Reason codes */ | |
| enum ieee80211_reasoncode { | |
| WLAN_REASON_UNSPECIFIED = 1, | |
| WLAN_REASON_PREV_AUTH_NOT_VALID = 2, | |
| WLAN_REASON_DEAUTH_LEAVING = 3, | |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4, | |
| WLAN_REASON_DISASSOC_AP_BUSY = 5, | |
| WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6, | |
| WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7, | |
| WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8, | |
| WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9, | |
| /* 802.11h */ | |
| WLAN_REASON_DISASSOC_BAD_POWER = 10, | |
| WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11, | |
| /* 802.11i */ | |
| WLAN_REASON_INVALID_IE = 13, | |
| WLAN_REASON_MIC_FAILURE = 14, | |
| WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, | |
| WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16, | |
| WLAN_REASON_IE_DIFFERENT = 17, | |
| WLAN_REASON_INVALID_GROUP_CIPHER = 18, | |
| WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19, | |
| WLAN_REASON_INVALID_AKMP = 20, | |
| WLAN_REASON_UNSUPP_RSN_VERSION = 21, | |
| WLAN_REASON_INVALID_RSN_IE_CAP = 22, | |
| WLAN_REASON_IEEE8021X_FAILED = 23, | |
| WLAN_REASON_CIPHER_SUITE_REJECTED = 24, | |
| /* TDLS (802.11z) */ | |
| WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE = 25, | |
| WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED = 26, | |
| /* 802.11e */ | |
| WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, | |
| WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, | |
| WLAN_REASON_DISASSOC_LOW_ACK = 34, | |
| WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35, | |
| WLAN_REASON_QSTA_LEAVE_QBSS = 36, | |
| WLAN_REASON_QSTA_NOT_USE = 37, | |
| WLAN_REASON_QSTA_REQUIRE_SETUP = 38, | |
| WLAN_REASON_QSTA_TIMEOUT = 39, | |
| WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45, | |
| /* 802.11s */ | |
| WLAN_REASON_MESH_PEER_CANCELED = 52, | |
| WLAN_REASON_MESH_MAX_PEERS = 53, | |
| WLAN_REASON_MESH_CONFIG = 54, | |
| WLAN_REASON_MESH_CLOSE = 55, | |
| WLAN_REASON_MESH_MAX_RETRIES = 56, | |
| WLAN_REASON_MESH_CONFIRM_TIMEOUT = 57, | |
| WLAN_REASON_MESH_INVALID_GTK = 58, | |
| WLAN_REASON_MESH_INCONSISTENT_PARAM = 59, | |
| WLAN_REASON_MESH_INVALID_SECURITY = 60, | |
| WLAN_REASON_MESH_PATH_ERROR = 61, | |
| WLAN_REASON_MESH_PATH_NOFORWARD = 62, | |
| WLAN_REASON_MESH_PATH_DEST_UNREACHABLE = 63, | |
| WLAN_REASON_MAC_EXISTS_IN_MBSS = 64, | |
| WLAN_REASON_MESH_CHAN_REGULATORY = 65, | |
| WLAN_REASON_MESH_CHAN = 66, | |
| }; | |
| /* Information Element IDs */ | |
| enum ieee80211_eid { | |
| WLAN_EID_SSID = 0, | |
| WLAN_EID_SUPP_RATES = 1, | |
| WLAN_EID_FH_PARAMS = 2, /* reserved now */ | |
| WLAN_EID_DS_PARAMS = 3, | |
| WLAN_EID_CF_PARAMS = 4, | |
| WLAN_EID_TIM = 5, | |
| WLAN_EID_IBSS_PARAMS = 6, | |
| WLAN_EID_COUNTRY = 7, | |
| /* 8, 9 reserved */ | |
| WLAN_EID_REQUEST = 10, | |
| WLAN_EID_QBSS_LOAD = 11, | |
| WLAN_EID_EDCA_PARAM_SET = 12, | |
| WLAN_EID_TSPEC = 13, | |
| WLAN_EID_TCLAS = 14, | |
| WLAN_EID_SCHEDULE = 15, | |
| WLAN_EID_CHALLENGE = 16, | |
| /* 17-31 reserved for challenge text extension */ | |
| WLAN_EID_PWR_CONSTRAINT = 32, | |
| WLAN_EID_PWR_CAPABILITY = 33, | |
| WLAN_EID_TPC_REQUEST = 34, | |
| WLAN_EID_TPC_REPORT = 35, | |
| WLAN_EID_SUPPORTED_CHANNELS = 36, | |
| WLAN_EID_CHANNEL_SWITCH = 37, | |
| WLAN_EID_MEASURE_REQUEST = 38, | |
| WLAN_EID_MEASURE_REPORT = 39, | |
| WLAN_EID_QUIET = 40, | |
| WLAN_EID_IBSS_DFS = 41, | |
| WLAN_EID_ERP_INFO = 42, | |
| WLAN_EID_TS_DELAY = 43, | |
| WLAN_EID_TCLAS_PROCESSING = 44, | |
| WLAN_EID_HT_CAPABILITY = 45, | |
| WLAN_EID_QOS_CAPA = 46, | |
| /* 47 reserved for Broadcom */ | |
| WLAN_EID_RSN = 48, | |
| WLAN_EID_802_15_COEX = 49, | |
| WLAN_EID_EXT_SUPP_RATES = 50, | |
| WLAN_EID_AP_CHAN_REPORT = 51, | |
| WLAN_EID_NEIGHBOR_REPORT = 52, | |
| WLAN_EID_RCPI = 53, | |
| WLAN_EID_MOBILITY_DOMAIN = 54, | |
| WLAN_EID_FAST_BSS_TRANSITION = 55, | |
| WLAN_EID_TIMEOUT_INTERVAL = 56, | |
| WLAN_EID_RIC_DATA = 57, | |
| WLAN_EID_DSE_REGISTERED_LOCATION = 58, | |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59, | |
| WLAN_EID_EXT_CHANSWITCH_ANN = 60, | |
| WLAN_EID_HT_OPERATION = 61, | |
| WLAN_EID_SECONDARY_CHANNEL_OFFSET = 62, | |
| WLAN_EID_BSS_AVG_ACCESS_DELAY = 63, | |
| WLAN_EID_ANTENNA_INFO = 64, | |
| WLAN_EID_RSNI = 65, | |
| WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66, | |
| WLAN_EID_BSS_AVAILABLE_CAPACITY = 67, | |
| WLAN_EID_BSS_AC_ACCESS_DELAY = 68, | |
| WLAN_EID_TIME_ADVERTISEMENT = 69, | |
| WLAN_EID_RRM_ENABLED_CAPABILITIES = 70, | |
| WLAN_EID_MULTIPLE_BSSID = 71, | |
| WLAN_EID_BSS_COEX_2040 = 72, | |
| WLAN_EID_BSS_INTOLERANT_CHL_REPORT = 73, | |
| WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74, | |
| WLAN_EID_RIC_DESCRIPTOR = 75, | |
| WLAN_EID_MMIE = 76, | |
| WLAN_EID_ASSOC_COMEBACK_TIME = 77, | |
| WLAN_EID_EVENT_REQUEST = 78, | |
| WLAN_EID_EVENT_REPORT = 79, | |
| WLAN_EID_DIAGNOSTIC_REQUEST = 80, | |
| WLAN_EID_DIAGNOSTIC_REPORT = 81, | |
| WLAN_EID_LOCATION_PARAMS = 82, | |
| WLAN_EID_NON_TX_BSSID_CAP = 83, | |
| WLAN_EID_SSID_LIST = 84, | |
| WLAN_EID_MULTI_BSSID_IDX = 85, | |
| WLAN_EID_FMS_DESCRIPTOR = 86, | |
| WLAN_EID_FMS_REQUEST = 87, | |
| WLAN_EID_FMS_RESPONSE = 88, | |
| WLAN_EID_QOS_TRAFFIC_CAPA = 89, | |
| WLAN_EID_BSS_MAX_IDLE_PERIOD = 90, | |
| WLAN_EID_TSF_REQUEST = 91, | |
| WLAN_EID_TSF_RESPOSNE = 92, | |
| WLAN_EID_WNM_SLEEP_MODE = 93, | |
| WLAN_EID_TIM_BCAST_REQ = 94, | |
| WLAN_EID_TIM_BCAST_RESP = 95, | |
| WLAN_EID_COLL_IF_REPORT = 96, | |
| WLAN_EID_CHANNEL_USAGE = 97, | |
| WLAN_EID_TIME_ZONE = 98, | |
| WLAN_EID_DMS_REQUEST = 99, | |
| WLAN_EID_DMS_RESPONSE = 100, | |
| WLAN_EID_LINK_ID = 101, | |
| WLAN_EID_WAKEUP_SCHEDUL = 102, | |
| /* 103 reserved */ | |
| WLAN_EID_CHAN_SWITCH_TIMING = 104, | |
| WLAN_EID_PTI_CONTROL = 105, | |
| WLAN_EID_PU_BUFFER_STATUS = 106, | |
| WLAN_EID_INTERWORKING = 107, | |
| WLAN_EID_ADVERTISEMENT_PROTOCOL = 108, | |
| WLAN_EID_EXPEDITED_BW_REQ = 109, | |
| WLAN_EID_QOS_MAP_SET = 110, | |
| WLAN_EID_ROAMING_CONSORTIUM = 111, | |
| WLAN_EID_EMERGENCY_ALERT = 112, | |
| WLAN_EID_MESH_CONFIG = 113, | |
| WLAN_EID_MESH_ID = 114, | |
| WLAN_EID_LINK_METRIC_REPORT = 115, | |
| WLAN_EID_CONGESTION_NOTIFICATION = 116, | |
| WLAN_EID_PEER_MGMT = 117, | |
| WLAN_EID_CHAN_SWITCH_PARAM = 118, | |
| WLAN_EID_MESH_AWAKE_WINDOW = 119, | |
| WLAN_EID_BEACON_TIMING = 120, | |
| WLAN_EID_MCCAOP_SETUP_REQ = 121, | |
| WLAN_EID_MCCAOP_SETUP_RESP = 122, | |
| WLAN_EID_MCCAOP_ADVERT = 123, | |
| WLAN_EID_MCCAOP_TEARDOWN = 124, | |
| WLAN_EID_GANN = 125, | |
| WLAN_EID_RANN = 126, | |
| WLAN_EID_EXT_CAPABILITY = 127, | |
| /* 128, 129 reserved for Agere */ | |
| WLAN_EID_PREQ = 130, | |
| WLAN_EID_PREP = 131, | |
| WLAN_EID_PERR = 132, | |
| /* 133-136 reserved for Cisco */ | |
| WLAN_EID_PXU = 137, | |
| WLAN_EID_PXUC = 138, | |
| WLAN_EID_AUTH_MESH_PEER_EXCH = 139, | |
| WLAN_EID_MIC = 140, | |
| WLAN_EID_DESTINATION_URI = 141, | |
| WLAN_EID_UAPSD_COEX = 142, | |
| WLAN_EID_WAKEUP_SCHEDULE = 143, | |
| WLAN_EID_EXT_SCHEDULE = 144, | |
| WLAN_EID_STA_AVAILABILITY = 145, | |
| WLAN_EID_DMG_TSPEC = 146, | |
| WLAN_EID_DMG_AT = 147, | |
| WLAN_EID_DMG_CAP = 148, | |
| /* 149 reserved for Cisco */ | |
| WLAN_EID_CISCO_VENDOR_SPECIFIC = 150, | |
| WLAN_EID_DMG_OPERATION = 151, | |
| WLAN_EID_DMG_BSS_PARAM_CHANGE = 152, | |
| WLAN_EID_DMG_BEAM_REFINEMENT = 153, | |
| WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154, | |
| /* 155-156 reserved for Cisco */ | |
| WLAN_EID_AWAKE_WINDOW = 157, | |
| WLAN_EID_MULTI_BAND = 158, | |
| WLAN_EID_ADDBA_EXT = 159, | |
| WLAN_EID_NEXT_PCP_LIST = 160, | |
| WLAN_EID_PCP_HANDOVER = 161, | |
| WLAN_EID_DMG_LINK_MARGIN = 162, | |
| WLAN_EID_SWITCHING_STREAM = 163, | |
| WLAN_EID_SESSION_TRANSITION = 164, | |
| WLAN_EID_DYN_TONE_PAIRING_REPORT = 165, | |
| WLAN_EID_CLUSTER_REPORT = 166, | |
| WLAN_EID_RELAY_CAP = 167, | |
| WLAN_EID_RELAY_XFER_PARAM_SET = 168, | |
| WLAN_EID_BEAM_LINK_MAINT = 169, | |
| WLAN_EID_MULTIPLE_MAC_ADDR = 170, | |
| WLAN_EID_U_PID = 171, | |
| WLAN_EID_DMG_LINK_ADAPT_ACK = 172, | |
| /* 173 reserved for Symbol */ | |
| WLAN_EID_MCCAOP_ADV_OVERVIEW = 174, | |
| WLAN_EID_QUIET_PERIOD_REQ = 175, | |
| /* 176 reserved for Symbol */ | |
| WLAN_EID_QUIET_PERIOD_RESP = 177, | |
| /* 178-179 reserved for Symbol */ | |
| /* 180 reserved for ISO/IEC 20011 */ | |
| WLAN_EID_EPAC_POLICY = 182, | |
| WLAN_EID_CLISTER_TIME_OFF = 183, | |
| WLAN_EID_INTER_AC_PRIO = 184, | |
| WLAN_EID_SCS_DESCRIPTOR = 185, | |
| WLAN_EID_QLOAD_REPORT = 186, | |
| WLAN_EID_HCCA_TXOP_UPDATE_COUNT = 187, | |
| WLAN_EID_HL_STREAM_ID = 188, | |
| WLAN_EID_GCR_GROUP_ADDR = 189, | |
| WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190, | |
| WLAN_EID_VHT_CAPABILITY = 191, | |
| WLAN_EID_VHT_OPERATION = 192, | |
| WLAN_EID_EXTENDED_BSS_LOAD = 193, | |
| WLAN_EID_WIDE_BW_CHANNEL_SWITCH = 194, | |
| WLAN_EID_TX_POWER_ENVELOPE = 195, | |
| WLAN_EID_CHANNEL_SWITCH_WRAPPER = 196, | |
| WLAN_EID_AID = 197, | |
| WLAN_EID_QUIET_CHANNEL = 198, | |
| WLAN_EID_OPMODE_NOTIF = 199, | |
| WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201, | |
| WLAN_EID_AID_REQUEST = 210, | |
| WLAN_EID_AID_RESPONSE = 211, | |
| WLAN_EID_S1G_BCN_COMPAT = 213, | |
| WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214, | |
| WLAN_EID_S1G_TWT = 216, | |
| WLAN_EID_S1G_CAPABILITIES = 217, | |
| WLAN_EID_VENDOR_SPECIFIC = 221, | |
| WLAN_EID_QOS_PARAMETER = 222, | |
| WLAN_EID_S1G_OPERATION = 232, | |
| WLAN_EID_CAG_NUMBER = 237, | |
| WLAN_EID_AP_CSN = 239, | |
| WLAN_EID_FILS_INDICATION = 240, | |
| WLAN_EID_DILS = 241, | |
| WLAN_EID_FRAGMENT = 242, | |
| WLAN_EID_RSNX = 244, | |
| WLAN_EID_EXTENSION = 255 | |
| }; | |
| /* Element ID Extensions for Element ID 255 */ | |
| enum ieee80211_eid_ext { | |
| WLAN_EID_EXT_ASSOC_DELAY_INFO = 1, | |
| WLAN_EID_EXT_FILS_REQ_PARAMS = 2, | |
| WLAN_EID_EXT_FILS_KEY_CONFIRM = 3, | |
| WLAN_EID_EXT_FILS_SESSION = 4, | |
| WLAN_EID_EXT_FILS_HLP_CONTAINER = 5, | |
| WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN = 6, | |
| WLAN_EID_EXT_KEY_DELIVERY = 7, | |
| WLAN_EID_EXT_FILS_WRAPPED_DATA = 8, | |
| WLAN_EID_EXT_FILS_PUBLIC_KEY = 12, | |
| WLAN_EID_EXT_FILS_NONCE = 13, | |
| WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE = 14, | |
| WLAN_EID_EXT_DH_PARAMETER = 32, | |
| WLAN_EID_EXT_HE_CAPABILITY = 35, | |
| WLAN_EID_EXT_HE_OPERATION = 36, | |
| WLAN_EID_EXT_UORA = 37, | |
| WLAN_EID_EXT_HE_MU_EDCA = 38, | |
| WLAN_EID_EXT_HE_SPR = 39, | |
| WLAN_EID_EXT_NDP_FEEDBACK_REPORT_PARAMSET = 41, | |
| WLAN_EID_EXT_BSS_COLOR_CHG_ANN = 42, | |
| WLAN_EID_EXT_QUIET_TIME_PERIOD_SETUP = 43, | |
| WLAN_EID_EXT_ESS_REPORT = 45, | |
| WLAN_EID_EXT_OPS = 46, | |
| WLAN_EID_EXT_HE_BSS_LOAD = 47, | |
| WLAN_EID_EXT_MAX_CHANNEL_SWITCH_TIME = 52, | |
| WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION = 55, | |
| WLAN_EID_EXT_NON_INHERITANCE = 56, | |
| WLAN_EID_EXT_KNOWN_BSSID = 57, | |
| WLAN_EID_EXT_SHORT_SSID_LIST = 58, | |
| WLAN_EID_EXT_HE_6GHZ_CAPA = 59, | |
| WLAN_EID_EXT_UL_MU_POWER_CAPA = 60, | |
| WLAN_EID_EXT_EHT_OPERATION = 106, | |
| WLAN_EID_EXT_EHT_MULTI_LINK = 107, | |
| WLAN_EID_EXT_EHT_CAPABILITY = 108, | |
| WLAN_EID_EXT_TID_TO_LINK_MAPPING = 109, | |
| WLAN_EID_EXT_BANDWIDTH_INDICATION = 135, | |
| WLAN_EID_EXT_KNOWN_STA_IDENTIFCATION = 136, | |
| WLAN_EID_EXT_NON_AP_STA_REG_CON = 137, | |
| }; | |
| /* Action category code */ | |
| enum ieee80211_category { | |
| WLAN_CATEGORY_SPECTRUM_MGMT = 0, | |
| WLAN_CATEGORY_QOS = 1, | |
| WLAN_CATEGORY_DLS = 2, | |
| WLAN_CATEGORY_BACK = 3, | |
| WLAN_CATEGORY_PUBLIC = 4, | |
| WLAN_CATEGORY_RADIO_MEASUREMENT = 5, | |
| WLAN_CATEGORY_FAST_BBS_TRANSITION = 6, | |
| WLAN_CATEGORY_HT = 7, | |
| WLAN_CATEGORY_SA_QUERY = 8, | |
| WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, | |
| WLAN_CATEGORY_WNM = 10, | |
| WLAN_CATEGORY_WNM_UNPROTECTED = 11, | |
| WLAN_CATEGORY_TDLS = 12, | |
| WLAN_CATEGORY_MESH_ACTION = 13, | |
| WLAN_CATEGORY_MULTIHOP_ACTION = 14, | |
| WLAN_CATEGORY_SELF_PROTECTED = 15, | |
| WLAN_CATEGORY_DMG = 16, | |
| WLAN_CATEGORY_WMM = 17, | |
| WLAN_CATEGORY_FST = 18, | |
| WLAN_CATEGORY_UNPROT_DMG = 20, | |
| WLAN_CATEGORY_VHT = 21, | |
| WLAN_CATEGORY_S1G = 22, | |
| WLAN_CATEGORY_PROTECTED_EHT = 37, | |
| WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, | |
| WLAN_CATEGORY_VENDOR_SPECIFIC = 127, | |
| }; | |
| /* SPECTRUM_MGMT action code */ | |
| enum ieee80211_spectrum_mgmt_actioncode { | |
| WLAN_ACTION_SPCT_MSR_REQ = 0, | |
| WLAN_ACTION_SPCT_MSR_RPRT = 1, | |
| WLAN_ACTION_SPCT_TPC_REQ = 2, | |
| WLAN_ACTION_SPCT_TPC_RPRT = 3, | |
| WLAN_ACTION_SPCT_CHL_SWITCH = 4, | |
| }; | |
| /* Self Protected Action codes */ | |
| enum ieee80211_self_protected_actioncode { | |
| WLAN_SP_RESERVED = 0, | |
| WLAN_SP_MESH_PEERING_OPEN = 1, | |
| WLAN_SP_MESH_PEERING_CONFIRM = 2, | |
| WLAN_SP_MESH_PEERING_CLOSE = 3, | |
| WLAN_SP_MGK_INFORM = 4, | |
| WLAN_SP_MGK_ACK = 5, | |
| }; | |
| /* Unprotected WNM action codes */ | |
| enum ieee80211_unprotected_wnm_actioncode { | |
| WLAN_UNPROTECTED_WNM_ACTION_TIM = 0, | |
| WLAN_UNPROTECTED_WNM_ACTION_TIMING_MEASUREMENT_RESPONSE = 1, | |
| }; | |
| /* Security key length */ | |
| enum ieee80211_key_len { | |
| WLAN_KEY_LEN_WEP40 = 5, | |
| WLAN_KEY_LEN_WEP104 = 13, | |
| WLAN_KEY_LEN_CCMP = 16, | |
| WLAN_KEY_LEN_CCMP_256 = 32, | |
| WLAN_KEY_LEN_TKIP = 32, | |
| WLAN_KEY_LEN_AES_CMAC = 16, | |
| WLAN_KEY_LEN_SMS4 = 32, | |
| WLAN_KEY_LEN_GCMP = 16, | |
| WLAN_KEY_LEN_GCMP_256 = 32, | |
| WLAN_KEY_LEN_BIP_CMAC_256 = 32, | |
| WLAN_KEY_LEN_BIP_GMAC_128 = 16, | |
| WLAN_KEY_LEN_BIP_GMAC_256 = 32, | |
| }; | |
| enum ieee80211_s1g_actioncode { | |
| WLAN_S1G_AID_SWITCH_REQUEST, | |
| WLAN_S1G_AID_SWITCH_RESPONSE, | |
| WLAN_S1G_SYNC_CONTROL, | |
| WLAN_S1G_STA_INFO_ANNOUNCE, | |
| WLAN_S1G_EDCA_PARAM_SET, | |
| WLAN_S1G_EL_OPERATION, | |
| WLAN_S1G_TWT_SETUP, | |
| WLAN_S1G_TWT_TEARDOWN, | |
| WLAN_S1G_SECT_GROUP_ID_LIST, | |
| WLAN_S1G_SECT_ID_FEEDBACK, | |
| WLAN_S1G_TWT_INFORMATION = 11, | |
| }; | |
| /* Radio measurement action codes as defined in IEEE 802.11-2024 - Table 9-470 */ | |
| enum ieee80211_radio_measurement_actioncode { | |
| WLAN_RM_ACTION_RADIO_MEASUREMENT_REQUEST = 0, | |
| WLAN_RM_ACTION_RADIO_MEASUREMENT_REPORT = 1, | |
| WLAN_RM_ACTION_LINK_MEASUREMENT_REQUEST = 2, | |
| WLAN_RM_ACTION_LINK_MEASUREMENT_REPORT = 3, | |
| WLAN_RM_ACTION_NEIGHBOR_REPORT_REQUEST = 4, | |
| WLAN_RM_ACTION_NEIGHBOR_REPORT_RESPONSE = 5, | |
| }; | |
| #define IEEE80211_WEP_IV_LEN 4 | |
| #define IEEE80211_WEP_ICV_LEN 4 | |
| #define IEEE80211_CCMP_HDR_LEN 8 | |
| #define IEEE80211_CCMP_MIC_LEN 8 | |
| #define IEEE80211_CCMP_PN_LEN 6 | |
| #define IEEE80211_CCMP_256_HDR_LEN 8 | |
| #define IEEE80211_CCMP_256_MIC_LEN 16 | |
| #define IEEE80211_CCMP_256_PN_LEN 6 | |
| #define IEEE80211_TKIP_IV_LEN 8 | |
| #define IEEE80211_TKIP_ICV_LEN 4 | |
| #define IEEE80211_CMAC_PN_LEN 6 | |
| #define IEEE80211_GMAC_PN_LEN 6 | |
| #define IEEE80211_GCMP_HDR_LEN 8 | |
| #define IEEE80211_GCMP_MIC_LEN 16 | |
| #define IEEE80211_GCMP_PN_LEN 6 | |
| #define FILS_NONCE_LEN 16 | |
| #define FILS_MAX_KEK_LEN 64 | |
| #define FILS_ERP_MAX_USERNAME_LEN 16 | |
| #define FILS_ERP_MAX_REALM_LEN 253 | |
| #define FILS_ERP_MAX_RRK_LEN 64 | |
| #define PMK_MAX_LEN 64 | |
| #define SAE_PASSWORD_MAX_LEN 128 | |
| /* Public action codes (IEEE Std 802.11-2016, 9.6.8.1, Table 9-307) */ | |
| enum ieee80211_pub_actioncode { | |
| WLAN_PUB_ACTION_20_40_BSS_COEX = 0, | |
| WLAN_PUB_ACTION_DSE_ENABLEMENT = 1, | |
| WLAN_PUB_ACTION_DSE_DEENABLEMENT = 2, | |
| WLAN_PUB_ACTION_DSE_REG_LOC_ANN = 3, | |
| WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4, | |
| WLAN_PUB_ACTION_DSE_MSMT_REQ = 5, | |
| WLAN_PUB_ACTION_DSE_MSMT_RESP = 6, | |
| WLAN_PUB_ACTION_MSMT_PILOT = 7, | |
| WLAN_PUB_ACTION_DSE_PC = 8, | |
| WLAN_PUB_ACTION_VENDOR_SPECIFIC = 9, | |
| WLAN_PUB_ACTION_GAS_INITIAL_REQ = 10, | |
| WLAN_PUB_ACTION_GAS_INITIAL_RESP = 11, | |
| WLAN_PUB_ACTION_GAS_COMEBACK_REQ = 12, | |
| WLAN_PUB_ACTION_GAS_COMEBACK_RESP = 13, | |
| WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14, | |
| WLAN_PUB_ACTION_LOC_TRACK_NOTI = 15, | |
| WLAN_PUB_ACTION_QAB_REQUEST_FRAME = 16, | |
| WLAN_PUB_ACTION_QAB_RESPONSE_FRAME = 17, | |
| WLAN_PUB_ACTION_QMF_POLICY = 18, | |
| WLAN_PUB_ACTION_QMF_POLICY_CHANGE = 19, | |
| WLAN_PUB_ACTION_QLOAD_REQUEST = 20, | |
| WLAN_PUB_ACTION_QLOAD_REPORT = 21, | |
| WLAN_PUB_ACTION_HCCA_TXOP_ADVERT = 22, | |
| WLAN_PUB_ACTION_HCCA_TXOP_RESPONSE = 23, | |
| WLAN_PUB_ACTION_PUBLIC_KEY = 24, | |
| WLAN_PUB_ACTION_CHANNEL_AVAIL_QUERY = 25, | |
| WLAN_PUB_ACTION_CHANNEL_SCHEDULE_MGMT = 26, | |
| WLAN_PUB_ACTION_CONTACT_VERI_SIGNAL = 27, | |
| WLAN_PUB_ACTION_GDD_ENABLEMENT_REQ = 28, | |
| WLAN_PUB_ACTION_GDD_ENABLEMENT_RESP = 29, | |
| WLAN_PUB_ACTION_NETWORK_CHANNEL_CONTROL = 30, | |
| WLAN_PUB_ACTION_WHITE_SPACE_MAP_ANN = 31, | |
| WLAN_PUB_ACTION_FTM_REQUEST = 32, | |
| WLAN_PUB_ACTION_FTM_RESPONSE = 33, | |
| WLAN_PUB_ACTION_FILS_DISCOVERY = 34, | |
| }; | |
| /* TDLS action codes */ | |
| enum ieee80211_tdls_actioncode { | |
| WLAN_TDLS_SETUP_REQUEST = 0, | |
| WLAN_TDLS_SETUP_RESPONSE = 1, | |
| WLAN_TDLS_SETUP_CONFIRM = 2, | |
| WLAN_TDLS_TEARDOWN = 3, | |
| WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4, | |
| WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5, | |
| WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6, | |
| WLAN_TDLS_PEER_PSM_REQUEST = 7, | |
| WLAN_TDLS_PEER_PSM_RESPONSE = 8, | |
| WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9, | |
| WLAN_TDLS_DISCOVERY_REQUEST = 10, | |
| }; | |
| /* Extended Channel Switching capability to be set in the 1st byte of | |
| * the @WLAN_EID_EXT_CAPABILITY information element | |
| */ | |
| #define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2) | |
| /* Multiple BSSID capability is set in the 6th bit of 3rd byte of the | |
| * @WLAN_EID_EXT_CAPABILITY information element | |
| */ | |
| #define WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT BIT(6) | |
| /* Timing Measurement protocol for time sync is set in the 7th bit of 3rd byte | |
| * of the @WLAN_EID_EXT_CAPABILITY information element | |
| */ | |
| #define WLAN_EXT_CAPA3_TIMING_MEASUREMENT_SUPPORT BIT(7) | |
| /* TDLS capabilities in the 4th byte of @WLAN_EID_EXT_CAPABILITY */ | |
| #define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4) | |
| #define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5) | |
| #define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6) | |
| /* Interworking capabilities are set in 7th bit of 4th byte of the | |
| * @WLAN_EID_EXT_CAPABILITY information element | |
| */ | |
| #define WLAN_EXT_CAPA4_INTERWORKING_ENABLED BIT(7) | |
| /* | |
| * TDLS capabililites to be enabled in the 5th byte of the | |
| * @WLAN_EID_EXT_CAPABILITY information element | |
| */ | |
| #define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5) | |
| #define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6) | |
| #define WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED BIT(7) | |
| #define WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED BIT(5) | |
| #define WLAN_EXT_CAPA8_OPMODE_NOTIF BIT(6) | |
| /* Defines the maximal number of MSDUs in an A-MSDU. */ | |
| #define WLAN_EXT_CAPA8_MAX_MSDU_IN_AMSDU_LSB BIT(7) | |
| #define WLAN_EXT_CAPA9_MAX_MSDU_IN_AMSDU_MSB BIT(0) | |
| /* | |
| * Fine Timing Measurement Initiator - bit 71 of @WLAN_EID_EXT_CAPABILITY | |
| * information element | |
| */ | |
| #define WLAN_EXT_CAPA9_FTM_INITIATOR BIT(7) | |
| /* Defines support for TWT Requester and TWT Responder */ | |
| #define WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT BIT(5) | |
| #define WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT BIT(6) | |
| /* | |
| * When set, indicates that the AP is able to tolerate 26-tone RU UL | |
| * OFDMA transmissions using HE TB PPDU from OBSS (not falsely classify the | |
| * 26-tone RU UL OFDMA transmissions as radar pulses). | |
| */ | |
| #define WLAN_EXT_CAPA10_OBSS_NARROW_BW_RU_TOLERANCE_SUPPORT BIT(7) | |
| /* Defines support for enhanced multi-bssid advertisement*/ | |
| #define WLAN_EXT_CAPA11_EMA_SUPPORT BIT(3) | |
| /* Enable Beacon Protection */ | |
| #define WLAN_EXT_CAPA11_BCN_PROTECT BIT(4) | |
| /* TDLS specific payload type in the LLC/SNAP header */ | |
| #define WLAN_TDLS_SNAP_RFTYPE 0x2 | |
| /* BSS Coex IE information field bits */ | |
| #define WLAN_BSS_COEX_INFORMATION_REQUEST BIT(0) | |
| /* | |
| * IEEE 802.11-2007 7.3.2.9 Country information element | |
| * | |
| * Minimum length is 8 octets, ie len must be evenly | |
| * divisible by 2 | |
| */ | |
| /* Although the spec says 8 I'm seeing 6 in practice */ | |
| #define IEEE80211_COUNTRY_IE_MIN_LEN 6 | |
| /* The Country String field of the element shall be 3 octets in length */ | |
| #define IEEE80211_COUNTRY_STRING_LEN 3 | |
| /* | |
| * For regulatory extension stuff see IEEE 802.11-2007 | |
| * Annex I (page 1141) and Annex J (page 1147). Also | |
| * review 7.3.2.9. | |
| * | |
| * When dot11RegulatoryClassesRequired is true and the | |
| * first_channel/reg_extension_id is >= 201 then the IE | |
| * compromises of the 'ext' struct represented below: | |
| * | |
| * - Regulatory extension ID - when generating IE this just needs | |
| * to be monotonically increasing for each triplet passed in | |
| * the IE | |
| * - Regulatory class - index into set of rules | |
| * - Coverage class - index into air propagation time (Table 7-27), | |
| * in microseconds, you can compute the air propagation time from | |
| * the index by multiplying by 3, so index 10 yields a propagation | |
| * of 10 us. Valid values are 0-31, values 32-255 are not defined | |
| * yet. A value of 0 inicates air propagation of <= 1 us. | |
| * | |
| * See also Table I.2 for Emission limit sets and table | |
| * I.3 for Behavior limit sets. Table J.1 indicates how to map | |
| * a reg_class to an emission limit set and behavior limit set. | |
| */ | |
| #define IEEE80211_COUNTRY_EXTENSION_ID 201 | |
| /* | |
| * Channels numbers in the IE must be monotonically increasing | |
| * if dot11RegulatoryClassesRequired is not true. | |
| * | |
| * If dot11RegulatoryClassesRequired is true consecutive | |
| * subband triplets following a regulatory triplet shall | |
| * have monotonically increasing first_channel number fields. | |
| * | |
| * Channel numbers shall not overlap. | |
| * | |
| * Note that max_power is signed. | |
| */ | |
| struct ieee80211_country_ie_triplet { | |
| union { | |
| struct { | |
| u8 first_channel; | |
| u8 num_channels; | |
| s8 max_power; | |
| } __packed chans; | |
| struct { | |
| u8 reg_extension_id; | |
| u8 reg_class; | |
| u8 coverage_class; | |
| } __packed ext; | |
| }; | |
| } __packed; | |
| enum ieee80211_timeout_interval_type { | |
| WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */, | |
| WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */, | |
| WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */, | |
| }; | |
| /** | |
| * struct ieee80211_timeout_interval_ie - Timeout Interval element | |
| * @type: type, see &enum ieee80211_timeout_interval_type | |
| * @value: timeout interval value | |
| */ | |
| struct ieee80211_timeout_interval_ie { | |
| u8 type; | |
| __le32 value; | |
| } __packed; | |
| /** | |
| * enum ieee80211_idle_options - BSS idle options | |
| * @WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE: the station should send an RSN | |
| * protected frame to the AP to reset the idle timer at the AP for | |
| * the station. | |
| */ | |
| enum ieee80211_idle_options { | |
| WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE = BIT(0), | |
| }; | |
| /** | |
| * struct ieee80211_bss_max_idle_period_ie - BSS max idle period element struct | |
| * | |
| * This structure refers to "BSS Max idle period element" | |
| * | |
| * @max_idle_period: indicates the time period during which a station can | |
| * refrain from transmitting frames to its associated AP without being | |
| * disassociated. In units of 1000 TUs. | |
| * @idle_options: indicates the options associated with the BSS idle capability | |
| * as specified in &enum ieee80211_idle_options. | |
| */ | |
| struct ieee80211_bss_max_idle_period_ie { | |
| __le16 max_idle_period; | |
| u8 idle_options; | |
| } __packed; | |
| /* SA Query action */ | |
| enum ieee80211_sa_query_action { | |
| WLAN_ACTION_SA_QUERY_REQUEST = 0, | |
| WLAN_ACTION_SA_QUERY_RESPONSE = 1, | |
| }; | |
| /** | |
| * struct ieee80211_bssid_index - multiple BSSID index element structure | |
| * | |
| * This structure refers to "Multiple BSSID-index element" | |
| * | |
| * @bssid_index: BSSID index | |
| * @dtim_period: optional, overrides transmitted BSS dtim period | |
| * @dtim_count: optional, overrides transmitted BSS dtim count | |
| */ | |
| struct ieee80211_bssid_index { | |
| u8 bssid_index; | |
| u8 dtim_period; | |
| u8 dtim_count; | |
| }; | |
| /** | |
| * struct ieee80211_multiple_bssid_configuration - multiple BSSID configuration | |
| * element structure | |
| * | |
| * This structure refers to "Multiple BSSID Configuration element" | |
| * | |
| * @bssid_count: total number of active BSSIDs in the set | |
| * @profile_periodicity: the least number of beacon frames need to be received | |
| * in order to discover all the nontransmitted BSSIDs in the set. | |
| */ | |
| struct ieee80211_multiple_bssid_configuration { | |
| u8 bssid_count; | |
| u8 profile_periodicity; | |
| }; | |
| #define SUITE(oui, id) (((oui) << 8) | (id)) | |
| /* cipher suite selectors */ | |
| #define WLAN_CIPHER_SUITE_USE_GROUP SUITE(0x000FAC, 0) | |
| #define WLAN_CIPHER_SUITE_WEP40 SUITE(0x000FAC, 1) | |
| #define WLAN_CIPHER_SUITE_TKIP SUITE(0x000FAC, 2) | |
| /* reserved: SUITE(0x000FAC, 3) */ | |
| #define WLAN_CIPHER_SUITE_CCMP SUITE(0x000FAC, 4) | |
| #define WLAN_CIPHER_SUITE_WEP104 SUITE(0x000FAC, 5) | |
| #define WLAN_CIPHER_SUITE_AES_CMAC SUITE(0x000FAC, 6) | |
| #define WLAN_CIPHER_SUITE_GCMP SUITE(0x000FAC, 8) | |
| #define WLAN_CIPHER_SUITE_GCMP_256 SUITE(0x000FAC, 9) | |
| #define WLAN_CIPHER_SUITE_CCMP_256 SUITE(0x000FAC, 10) | |
| #define WLAN_CIPHER_SUITE_BIP_GMAC_128 SUITE(0x000FAC, 11) | |
| #define WLAN_CIPHER_SUITE_BIP_GMAC_256 SUITE(0x000FAC, 12) | |
| #define WLAN_CIPHER_SUITE_BIP_CMAC_256 SUITE(0x000FAC, 13) | |
| #define WLAN_CIPHER_SUITE_SMS4 SUITE(0x001472, 1) | |
| /* AKM suite selectors */ | |
| #define WLAN_AKM_SUITE_8021X SUITE(0x000FAC, 1) | |
| #define WLAN_AKM_SUITE_PSK SUITE(0x000FAC, 2) | |
| #define WLAN_AKM_SUITE_FT_8021X SUITE(0x000FAC, 3) | |
| #define WLAN_AKM_SUITE_FT_PSK SUITE(0x000FAC, 4) | |
| #define WLAN_AKM_SUITE_8021X_SHA256 SUITE(0x000FAC, 5) | |
| #define WLAN_AKM_SUITE_PSK_SHA256 SUITE(0x000FAC, 6) | |
| #define WLAN_AKM_SUITE_TDLS SUITE(0x000FAC, 7) | |
| #define WLAN_AKM_SUITE_SAE SUITE(0x000FAC, 8) | |
| #define WLAN_AKM_SUITE_FT_OVER_SAE SUITE(0x000FAC, 9) | |
| #define WLAN_AKM_SUITE_AP_PEER_KEY SUITE(0x000FAC, 10) | |
| #define WLAN_AKM_SUITE_8021X_SUITE_B SUITE(0x000FAC, 11) | |
| #define WLAN_AKM_SUITE_8021X_SUITE_B_192 SUITE(0x000FAC, 12) | |
| #define WLAN_AKM_SUITE_FT_8021X_SHA384 SUITE(0x000FAC, 13) | |
| #define WLAN_AKM_SUITE_FILS_SHA256 SUITE(0x000FAC, 14) | |
| #define WLAN_AKM_SUITE_FILS_SHA384 SUITE(0x000FAC, 15) | |
| #define WLAN_AKM_SUITE_FT_FILS_SHA256 SUITE(0x000FAC, 16) | |
| #define WLAN_AKM_SUITE_FT_FILS_SHA384 SUITE(0x000FAC, 17) | |
| #define WLAN_AKM_SUITE_OWE SUITE(0x000FAC, 18) | |
| #define WLAN_AKM_SUITE_FT_PSK_SHA384 SUITE(0x000FAC, 19) | |
| #define WLAN_AKM_SUITE_PSK_SHA384 SUITE(0x000FAC, 20) | |
| #define WLAN_AKM_SUITE_WFA_DPP SUITE(WLAN_OUI_WFA, 2) | |
| #define WLAN_MAX_KEY_LEN 32 | |
| #define WLAN_PMK_NAME_LEN 16 | |
| #define WLAN_PMKID_LEN 16 | |
| #define WLAN_PMK_LEN_EAP_LEAP 16 | |
| #define WLAN_PMK_LEN 32 | |
| #define WLAN_PMK_LEN_SUITE_B_192 48 | |
| #define WLAN_OUI_WFA 0x506f9a | |
| #define WLAN_OUI_TYPE_WFA_P2P 9 | |
| #define WLAN_OUI_TYPE_WFA_DPP 0x1A | |
| #define WLAN_OUI_MICROSOFT 0x0050f2 | |
| #define WLAN_OUI_TYPE_MICROSOFT_WPA 1 | |
| #define WLAN_OUI_TYPE_MICROSOFT_WMM 2 | |
| #define WLAN_OUI_TYPE_MICROSOFT_WPS 4 | |
| #define WLAN_OUI_TYPE_MICROSOFT_TPC 8 | |
| /* | |
| * WMM/802.11e Tspec Element | |
| */ | |
| #define IEEE80211_WMM_IE_TSPEC_TID_MASK 0x0F | |
| #define IEEE80211_WMM_IE_TSPEC_TID_SHIFT 1 | |
| enum ieee80211_tspec_status_code { | |
| IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED = 0, | |
| IEEE80211_TSPEC_STATUS_ADDTS_INVAL_PARAMS = 0x1, | |
| }; | |
| struct ieee80211_tspec_ie { | |
| u8 element_id; | |
| u8 len; | |
| u8 oui[3]; | |
| u8 oui_type; | |
| u8 oui_subtype; | |
| u8 version; | |
| __le16 tsinfo; | |
| u8 tsinfo_resvd; | |
| __le16 nominal_msdu; | |
| __le16 max_msdu; | |
| __le32 min_service_int; | |
| __le32 max_service_int; | |
| __le32 inactivity_int; | |
| __le32 suspension_int; | |
| __le32 service_start_time; | |
| __le32 min_data_rate; | |
| __le32 mean_data_rate; | |
| __le32 peak_data_rate; | |
| __le32 max_burst_size; | |
| __le32 delay_bound; | |
| __le32 min_phy_rate; | |
| __le16 sba; | |
| __le16 medium_time; | |
| } __packed; | |
| /** | |
| * ieee80211_get_qos_ctl - get pointer to qos control bytes | |
| * @hdr: the frame | |
| * Return: a pointer to the QoS control field in the frame header | |
| * | |
| * The qos ctrl bytes come after the frame_control, duration, seq_num | |
| * and 3 or 4 addresses of length ETH_ALEN. Checks frame_control to choose | |
| * between struct ieee80211_qos_hdr_4addr and struct ieee80211_qos_hdr. | |
| */ | |
| static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr) | |
| { | |
| union { | |
| struct ieee80211_qos_hdr addr3; | |
| struct ieee80211_qos_hdr_4addr addr4; | |
| } *qos; | |
| qos = (void *)hdr; | |
| if (ieee80211_has_a4(qos->addr3.frame_control)) | |
| return (u8 *)&qos->addr4.qos_ctrl; | |
| else | |
| return (u8 *)&qos->addr3.qos_ctrl; | |
| } | |
| /** | |
| * ieee80211_get_tid - get qos TID | |
| * @hdr: the frame | |
| * Return: the TID from the QoS control field | |
| */ | |
| static inline u8 ieee80211_get_tid(struct ieee80211_hdr *hdr) | |
| { | |
| u8 *qc = ieee80211_get_qos_ctl(hdr); | |
| return qc[0] & IEEE80211_QOS_CTL_TID_MASK; | |
| } | |
| /** | |
| * ieee80211_get_SA - get pointer to SA | |
| * @hdr: the frame | |
| * Return: a pointer to the source address (SA) | |
| * | |
| * Given an 802.11 frame, this function returns the offset | |
| * to the source address (SA). It does not verify that the | |
| * header is long enough to contain the address, and the | |
| * header must be long enough to contain the frame control | |
| * field. | |
| */ | |
| static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_has_a4(hdr->frame_control)) | |
| return hdr->addr4; | |
| if (ieee80211_has_fromds(hdr->frame_control)) | |
| return hdr->addr3; | |
| return hdr->addr2; | |
| } | |
| /** | |
| * ieee80211_get_DA - get pointer to DA | |
| * @hdr: the frame | |
| * Return: a pointer to the destination address (DA) | |
| * | |
| * Given an 802.11 frame, this function returns the offset | |
| * to the destination address (DA). It does not verify that | |
| * the header is long enough to contain the address, and the | |
| * header must be long enough to contain the frame control | |
| * field. | |
| */ | |
| static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_has_tods(hdr->frame_control)) | |
| return hdr->addr3; | |
| else | |
| return hdr->addr1; | |
| } | |
| /** | |
| * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU | |
| * @skb: the skb to check, starting with the 802.11 header | |
| * Return: whether or not the MMPDU is bufferable | |
| */ | |
| static inline bool ieee80211_is_bufferable_mmpdu(struct sk_buff *skb) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; | |
| __le16 fc = mgmt->frame_control; | |
| /* | |
| * IEEE 802.11 REVme D2.0 definition of bufferable MMPDU; | |
| * note that this ignores the IBSS special case. | |
| */ | |
| if (!ieee80211_is_mgmt(fc)) | |
| return false; | |
| if (ieee80211_is_disassoc(fc) || ieee80211_is_deauth(fc)) | |
| return true; | |
| if (!ieee80211_is_action(fc)) | |
| return false; | |
| if (skb->len < offsetofend(typeof(*mgmt), u.action.u.ftm.action_code)) | |
| return true; | |
| /* action frame - additionally check for non-bufferable FTM */ | |
| if (mgmt->u.action.category != WLAN_CATEGORY_PUBLIC && | |
| mgmt->u.action.category != WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION) | |
| return true; | |
| if (mgmt->u.action.u.ftm.action_code == WLAN_PUB_ACTION_FTM_REQUEST || | |
| mgmt->u.action.u.ftm.action_code == WLAN_PUB_ACTION_FTM_RESPONSE) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * _ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame | |
| * @hdr: the frame (buffer must include at least the first octet of payload) | |
| * Return: whether or not the frame is a robust management frame | |
| */ | |
| static inline bool _ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) | |
| { | |
| if (ieee80211_is_disassoc(hdr->frame_control) || | |
| ieee80211_is_deauth(hdr->frame_control)) | |
| return true; | |
| if (ieee80211_is_action(hdr->frame_control)) { | |
| u8 *category; | |
| /* | |
| * Action frames, excluding Public Action frames, are Robust | |
| * Management Frames. However, if we are looking at a Protected | |
| * frame, skip the check since the data may be encrypted and | |
| * the frame has already been found to be a Robust Management | |
| * Frame (by the other end). | |
| */ | |
| if (ieee80211_has_protected(hdr->frame_control)) | |
| return true; | |
| category = ((u8 *) hdr) + 24; | |
| return *category != WLAN_CATEGORY_PUBLIC && | |
| *category != WLAN_CATEGORY_HT && | |
| *category != WLAN_CATEGORY_WNM_UNPROTECTED && | |
| *category != WLAN_CATEGORY_SELF_PROTECTED && | |
| *category != WLAN_CATEGORY_UNPROT_DMG && | |
| *category != WLAN_CATEGORY_VHT && | |
| *category != WLAN_CATEGORY_S1G && | |
| *category != WLAN_CATEGORY_VENDOR_SPECIFIC; | |
| } | |
| return false; | |
| } | |
| /** | |
| * ieee80211_is_robust_mgmt_frame - check if skb contains a robust mgmt frame | |
| * @skb: the skb containing the frame, length will be checked | |
| * Return: whether or not the frame is a robust management frame | |
| */ | |
| static inline bool ieee80211_is_robust_mgmt_frame(struct sk_buff *skb) | |
| { | |
| if (skb->len < IEEE80211_MIN_ACTION_SIZE) | |
| return false; | |
| return _ieee80211_is_robust_mgmt_frame((void *)skb->data); | |
| } | |
| /** | |
| * ieee80211_is_public_action - check if frame is a public action frame | |
| * @hdr: the frame | |
| * @len: length of the frame | |
| * Return: whether or not the frame is a public action frame | |
| */ | |
| static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr, | |
| size_t len) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)hdr; | |
| if (len < IEEE80211_MIN_ACTION_SIZE) | |
| return false; | |
| if (!ieee80211_is_action(hdr->frame_control)) | |
| return false; | |
| return mgmt->u.action.category == WLAN_CATEGORY_PUBLIC; | |
| } | |
| /** | |
| * ieee80211_is_protected_dual_of_public_action - check if skb contains a | |
| * protected dual of public action management frame | |
| * @skb: the skb containing the frame, length will be checked | |
| * | |
| * Return: true if the skb contains a protected dual of public action | |
| * management frame, false otherwise. | |
| */ | |
| static inline bool | |
| ieee80211_is_protected_dual_of_public_action(struct sk_buff *skb) | |
| { | |
| u8 action; | |
| if (!ieee80211_is_public_action((void *)skb->data, skb->len) || | |
| skb->len < IEEE80211_MIN_ACTION_SIZE + 1) | |
| return false; | |
| action = *(u8 *)(skb->data + IEEE80211_MIN_ACTION_SIZE); | |
| return action != WLAN_PUB_ACTION_20_40_BSS_COEX && | |
| action != WLAN_PUB_ACTION_DSE_REG_LOC_ANN && | |
| action != WLAN_PUB_ACTION_MSMT_PILOT && | |
| action != WLAN_PUB_ACTION_TDLS_DISCOVER_RES && | |
| action != WLAN_PUB_ACTION_LOC_TRACK_NOTI && | |
| action != WLAN_PUB_ACTION_FTM_REQUEST && | |
| action != WLAN_PUB_ACTION_FTM_RESPONSE && | |
| action != WLAN_PUB_ACTION_FILS_DISCOVERY && | |
| action != WLAN_PUB_ACTION_VENDOR_SPECIFIC; | |
| } | |
| /** | |
| * _ieee80211_is_group_privacy_action - check if frame is a group addressed | |
| * privacy action frame | |
| * @hdr: the frame | |
| * Return: whether or not the frame is a group addressed privacy action frame | |
| */ | |
| static inline bool _ieee80211_is_group_privacy_action(struct ieee80211_hdr *hdr) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)hdr; | |
| if (!ieee80211_is_action(hdr->frame_control) || | |
| !is_multicast_ether_addr(hdr->addr1)) | |
| return false; | |
| return mgmt->u.action.category == WLAN_CATEGORY_MESH_ACTION || | |
| mgmt->u.action.category == WLAN_CATEGORY_MULTIHOP_ACTION; | |
| } | |
| /** | |
| * ieee80211_is_group_privacy_action - check if frame is a group addressed | |
| * privacy action frame | |
| * @skb: the skb containing the frame, length will be checked | |
| * Return: whether or not the frame is a group addressed privacy action frame | |
| */ | |
| static inline bool ieee80211_is_group_privacy_action(struct sk_buff *skb) | |
| { | |
| if (skb->len < IEEE80211_MIN_ACTION_SIZE) | |
| return false; | |
| return _ieee80211_is_group_privacy_action((void *)skb->data); | |
| } | |
| /** | |
| * ieee80211_tu_to_usec - convert time units (TU) to microseconds | |
| * @tu: the TUs | |
| * Return: the time value converted to microseconds | |
| */ | |
| static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) | |
| { | |
| return 1024 * tu; | |
| } | |
| static inline bool __ieee80211_check_tim(const struct ieee80211_tim_ie *tim, | |
| u8 tim_len, u16 aid) | |
| { | |
| u8 mask; | |
| u8 index, indexn1, indexn2; | |
| if (unlikely(!tim || tim_len < sizeof(*tim))) | |
| return false; | |
| aid &= 0x3fff; | |
| index = aid / 8; | |
| mask = 1 << (aid & 7); | |
| indexn1 = tim->bitmap_ctrl & 0xfe; | |
| indexn2 = tim_len + indexn1 - 4; | |
| if (index < indexn1 || index > indexn2) | |
| return false; | |
| index -= indexn1; | |
| return !!(tim->virtual_map[index] & mask); | |
| } | |
| struct s1g_tim_aid { | |
| u16 aid; | |
| u8 target_blk; /* Target block index */ | |
| u8 target_subblk; /* Target subblock index */ | |
| u8 target_subblk_bit; /* Target subblock bit */ | |
| }; | |
| struct s1g_tim_enc_block { | |
| u8 enc_mode; | |
| bool inverse; | |
| const u8 *ptr; | |
| u8 len; | |
| /* | |
| * For an OLB encoded block that spans multiple blocks, this | |
| * is the offset into the span described by that encoded block. | |
| */ | |
| u8 olb_blk_offset; | |
| }; | |
| /* | |
| * Helper routines to quickly extract the length of an encoded block. Validation | |
| * is also performed to ensure the length extracted lies within the TIM. | |
| */ | |
| static inline int ieee80211_s1g_len_bitmap(const u8 *ptr, const u8 *end) | |
| { | |
| u8 blkmap; | |
| u8 n_subblks; | |
| if (ptr >= end) | |
| return -EINVAL; | |
| blkmap = *ptr; | |
| n_subblks = hweight8(blkmap); | |
| if (ptr + 1 + n_subblks > end) | |
| return -EINVAL; | |
| return 1 + n_subblks; | |
| } | |
| static inline int ieee80211_s1g_len_single(const u8 *ptr, const u8 *end) | |
| { | |
| return (ptr + 1 > end) ? -EINVAL : 1; | |
| } | |
| static inline int ieee80211_s1g_len_olb(const u8 *ptr, const u8 *end) | |
| { | |
| if (ptr >= end) | |
| return -EINVAL; | |
| return (ptr + 1 + *ptr > end) ? -EINVAL : 1 + *ptr; | |
| } | |
| /* | |
| * Enumerate all encoded blocks until we find the encoded block that describes | |
| * our target AID. OLB is a special case as a single encoded block can describe | |
| * multiple blocks as a single encoded block. | |
| */ | |
| static inline int ieee80211_s1g_find_target_block(struct s1g_tim_enc_block *enc, | |
| const struct s1g_tim_aid *aid, | |
| const u8 *ptr, const u8 *end) | |
| { | |
| /* need at least block-control octet */ | |
| while (ptr + 1 <= end) { | |
| u8 ctrl = *ptr++; | |
| u8 mode = ctrl & 0x03; | |
| bool contains, inverse = ctrl & BIT(2); | |
| u8 span, blk_off = ctrl >> 3; | |
| int len; | |
| switch (mode) { | |
| case IEEE80211_S1G_TIM_ENC_MODE_BLOCK: | |
| len = ieee80211_s1g_len_bitmap(ptr, end); | |
| contains = blk_off == aid->target_blk; | |
| break; | |
| case IEEE80211_S1G_TIM_ENC_MODE_SINGLE: | |
| len = ieee80211_s1g_len_single(ptr, end); | |
| contains = blk_off == aid->target_blk; | |
| break; | |
| case IEEE80211_S1G_TIM_ENC_MODE_OLB: | |
| len = ieee80211_s1g_len_olb(ptr, end); | |
| /* | |
| * An OLB encoded block can describe more then one | |
| * block, meaning an encoded OLB block can span more | |
| * then a single block. | |
| */ | |
| if (len > 0) { | |
| /* Minus one for the length octet */ | |
| span = DIV_ROUND_UP(len - 1, 8); | |
| /* | |
| * Check if our target block lies within the | |
| * block span described by this encoded block. | |
| */ | |
| contains = (aid->target_blk >= blk_off) && | |
| (aid->target_blk < blk_off + span); | |
| } | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| if (len < 0) | |
| return len; | |
| if (contains) { | |
| enc->enc_mode = mode; | |
| enc->inverse = inverse; | |
| enc->ptr = ptr; | |
| enc->len = (u8)len; | |
| enc->olb_blk_offset = blk_off; | |
| return 0; | |
| } | |
| ptr += len; | |
| } | |
| return -ENOENT; | |
| } | |
| static inline bool ieee80211_s1g_parse_bitmap(struct s1g_tim_enc_block *enc, | |
| struct s1g_tim_aid *aid) | |
| { | |
| const u8 *ptr = enc->ptr; | |
| u8 blkmap = *ptr++; | |
| /* | |
| * If our block bitmap does not contain a set bit that corresponds | |
| * to our AID, it could mean a variety of things depending on if | |
| * the encoding mode is inverted or not. | |
| * | |
| * 1. If inverted, it means the entire subblock is present and hence | |
| * our AID has been set. | |
| * 2. If not inverted, it means our subblock is not present and hence | |
| * it is all zero meaning our AID is not set. | |
| */ | |
| if (!(blkmap & BIT(aid->target_subblk))) | |
| return enc->inverse; | |
| /* | |
| * Increment ptr by the number of set subblocks that appear before our | |
| * target subblock. If our target subblock is 0, do nothing as ptr | |
| * already points to our target subblock. | |
| */ | |
| if (aid->target_subblk) | |
| ptr += hweight8(blkmap & GENMASK(aid->target_subblk - 1, 0)); | |
| return !!(*ptr & BIT(aid->target_subblk_bit)) ^ enc->inverse; | |
| } | |
| static inline bool ieee80211_s1g_parse_single(struct s1g_tim_enc_block *enc, | |
| struct s1g_tim_aid *aid) | |
| { | |
| /* | |
| * Single AID mode describes, as the name suggests, a single AID | |
| * within the block described by the encoded block. The octet | |
| * contains the 6 LSBs of the AID described in the block. The other | |
| * 2 bits are reserved. When inversed, every single AID described | |
| * by the current block have buffered traffic except for the AID | |
| * described in the single AID octet. | |
| */ | |
| return ((*enc->ptr & 0x3f) == (aid->aid & 0x3f)) ^ enc->inverse; | |
| } | |
| static inline bool ieee80211_s1g_parse_olb(struct s1g_tim_enc_block *enc, | |
| struct s1g_tim_aid *aid) | |
| { | |
| const u8 *ptr = enc->ptr; | |
| u8 blk_len = *ptr++; | |
| /* | |
| * Given an OLB encoded block that describes multiple blocks, | |
| * calculate the offset into the span. Then calculate the | |
| * subblock location normally. | |
| */ | |
| u16 span_offset = aid->target_blk - enc->olb_blk_offset; | |
| u16 subblk_idx = span_offset * 8 + aid->target_subblk; | |
| if (subblk_idx >= blk_len) | |
| return enc->inverse; | |
| return !!(ptr[subblk_idx] & BIT(aid->target_subblk_bit)) ^ enc->inverse; | |
| } | |
| /* | |
| * An S1G PVB has 3 non optional encoding types, each that can be inverted. | |
| * An S1G PVB is constructed with zero or more encoded block subfields. Each | |
| * encoded block represents a single "block" of AIDs (64), and each encoded | |
| * block can contain one of the 3 encoding types alongside a single bit for | |
| * whether the bits should be inverted. | |
| * | |
| * As the standard makes no guarantee about the ordering of encoded blocks, | |
| * we must parse every encoded block in the worst case scenario given an | |
| * AID that lies within the last block. | |
| */ | |
| static inline bool ieee80211_s1g_check_tim(const struct ieee80211_tim_ie *tim, | |
| u8 tim_len, u16 aid) | |
| { | |
| int err; | |
| struct s1g_tim_aid target_aid; | |
| struct s1g_tim_enc_block enc_blk; | |
| if (tim_len < 3) | |
| return false; | |
| target_aid.aid = aid; | |
| target_aid.target_blk = (aid >> 6) & 0x1f; | |
| target_aid.target_subblk = (aid >> 3) & 0x7; | |
| target_aid.target_subblk_bit = aid & 0x7; | |
| /* | |
| * Find our AIDs target encoded block and fill &enc_blk with the | |
| * encoded blocks information. If no entry is found or an error | |
| * occurs return false. | |
| */ | |
| err = ieee80211_s1g_find_target_block(&enc_blk, &target_aid, | |
| tim->virtual_map, | |
| (const u8 *)tim + tim_len + 2); | |
| if (err) | |
| return false; | |
| switch (enc_blk.enc_mode) { | |
| case IEEE80211_S1G_TIM_ENC_MODE_BLOCK: | |
| return ieee80211_s1g_parse_bitmap(&enc_blk, &target_aid); | |
| case IEEE80211_S1G_TIM_ENC_MODE_SINGLE: | |
| return ieee80211_s1g_parse_single(&enc_blk, &target_aid); | |
| case IEEE80211_S1G_TIM_ENC_MODE_OLB: | |
| return ieee80211_s1g_parse_olb(&enc_blk, &target_aid); | |
| default: | |
| return false; | |
| } | |
| } | |
| /** | |
| * ieee80211_check_tim - check if AID bit is set in TIM | |
| * @tim: the TIM IE | |
| * @tim_len: length of the TIM IE | |
| * @aid: the AID to look for | |
| * @s1g: whether the TIM is from an S1G PPDU | |
| * Return: whether or not traffic is indicated in the TIM for the given AID | |
| */ | |
| static inline bool ieee80211_check_tim(const struct ieee80211_tim_ie *tim, | |
| u8 tim_len, u16 aid, bool s1g) | |
| { | |
| return s1g ? ieee80211_s1g_check_tim(tim, tim_len, aid) : | |
| __ieee80211_check_tim(tim, tim_len, aid); | |
| } | |
| /** | |
| * ieee80211_get_tdls_action - get TDLS action code | |
| * @skb: the skb containing the frame, length will not be checked | |
| * Return: the TDLS action code, or -1 if it's not an encapsulated TDLS action | |
| * frame | |
| * | |
| * This function assumes the frame is a data frame, and that the network header | |
| * is in the correct place. | |
| */ | |
| static inline int ieee80211_get_tdls_action(struct sk_buff *skb) | |
| { | |
| if (!skb_is_nonlinear(skb) && | |
| skb->len > (skb_network_offset(skb) + 2)) { | |
| /* Point to where the indication of TDLS should start */ | |
| const u8 *tdls_data = skb_network_header(skb) - 2; | |
| if (get_unaligned_be16(tdls_data) == ETH_P_TDLS && | |
| tdls_data[2] == WLAN_TDLS_SNAP_RFTYPE && | |
| tdls_data[3] == WLAN_CATEGORY_TDLS) | |
| return tdls_data[4]; | |
| } | |
| return -1; | |
| } | |
| /* convert time units */ | |
| #define TU_TO_JIFFIES(x) (usecs_to_jiffies((x) * 1024)) | |
| #define TU_TO_EXP_TIME(x) (jiffies + TU_TO_JIFFIES(x)) | |
| /* convert frequencies */ | |
| #define MHZ_TO_KHZ(freq) ((freq) * 1000) | |
| #define KHZ_TO_MHZ(freq) ((freq) / 1000) | |
| #define PR_KHZ(f) KHZ_TO_MHZ(f), f % 1000 | |
| #define KHZ_F "%d.%03d" | |
| /* convert powers */ | |
| #define DBI_TO_MBI(gain) ((gain) * 100) | |
| #define MBI_TO_DBI(gain) ((gain) / 100) | |
| #define DBM_TO_MBM(gain) ((gain) * 100) | |
| #define MBM_TO_DBM(gain) ((gain) / 100) | |
| /** | |
| * ieee80211_action_contains_tpc - checks if the frame contains TPC element | |
| * @skb: the skb containing the frame, length will be checked | |
| * Return: %true if the frame contains a TPC element, %false otherwise | |
| * | |
| * This function checks if it's either TPC report action frame or Link | |
| * Measurement report action frame as defined in IEEE Std. 802.11-2012 8.5.2.5 | |
| * and 8.5.7.5 accordingly. | |
| */ | |
| static inline bool ieee80211_action_contains_tpc(struct sk_buff *skb) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; | |
| if (!ieee80211_is_action(mgmt->frame_control)) | |
| return false; | |
| if (skb->len < IEEE80211_MIN_ACTION_SIZE + | |
| sizeof(mgmt->u.action.u.tpc_report)) | |
| return false; | |
| /* | |
| * TPC report - check that: | |
| * category = 0 (Spectrum Management) or 5 (Radio Measurement) | |
| * spectrum management action = 3 (TPC/Link Measurement report) | |
| * TPC report EID = 35 | |
| * TPC report element length = 2 | |
| * | |
| * The spectrum management's tpc_report struct is used here both for | |
| * parsing tpc_report and radio measurement's link measurement report | |
| * frame, since the relevant part is identical in both frames. | |
| */ | |
| if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT && | |
| mgmt->u.action.category != WLAN_CATEGORY_RADIO_MEASUREMENT) | |
| return false; | |
| /* both spectrum mgmt and link measurement have same action code */ | |
| if (mgmt->u.action.u.tpc_report.action_code != | |
| WLAN_ACTION_SPCT_TPC_RPRT) | |
| return false; | |
| if (mgmt->u.action.u.tpc_report.tpc_elem_id != WLAN_EID_TPC_REPORT || | |
| mgmt->u.action.u.tpc_report.tpc_elem_length != | |
| sizeof(struct ieee80211_tpc_report_ie)) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * ieee80211_is_timing_measurement - check if frame is timing measurement response | |
| * @skb: the SKB to check | |
| * Return: whether or not the frame is a valid timing measurement response | |
| */ | |
| static inline bool ieee80211_is_timing_measurement(struct sk_buff *skb) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; | |
| if (skb->len < IEEE80211_MIN_ACTION_SIZE) | |
| return false; | |
| if (!ieee80211_is_action(mgmt->frame_control)) | |
| return false; | |
| if (mgmt->u.action.category == WLAN_CATEGORY_WNM_UNPROTECTED && | |
| mgmt->u.action.u.wnm_timing_msr.action_code == | |
| WLAN_UNPROTECTED_WNM_ACTION_TIMING_MEASUREMENT_RESPONSE && | |
| skb->len >= offsetofend(typeof(*mgmt), u.action.u.wnm_timing_msr)) | |
| return true; | |
| return false; | |
| } | |
| /** | |
| * ieee80211_is_ftm - check if frame is FTM response | |
| * @skb: the SKB to check | |
| * Return: whether or not the frame is a valid FTM response action frame | |
| */ | |
| static inline bool ieee80211_is_ftm(struct sk_buff *skb) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; | |
| if (!ieee80211_is_public_action((void *)mgmt, skb->len)) | |
| return false; | |
| if (mgmt->u.action.u.ftm.action_code == | |
| WLAN_PUB_ACTION_FTM_RESPONSE && | |
| skb->len >= offsetofend(typeof(*mgmt), u.action.u.ftm)) | |
| return true; | |
| return false; | |
| } | |
| /** | |
| * ieee80211_is_s1g_short_beacon - check if frame is an S1G short beacon | |
| * @fc: frame control bytes in little-endian byteorder | |
| * @variable: pointer to the beacon frame elements | |
| * @variable_len: length of the frame elements | |
| * Return: whether or not the frame is an S1G short beacon. As per | |
| * IEEE80211-2024 11.1.3.10.1, The S1G beacon compatibility element shall | |
| * always be present as the first element in beacon frames generated at a | |
| * TBTT (Target Beacon Transmission Time), so any frame not containing | |
| * this element must have been generated at a TSBTT (Target Short Beacon | |
| * Transmission Time) that is not a TBTT. Additionally, short beacons are | |
| * prohibited from containing the S1G beacon compatibility element as per | |
| * IEEE80211-2024 9.3.4.3 Table 9-76, so if we have an S1G beacon with | |
| * either no elements or the first element is not the beacon compatibility | |
| * element, we have a short beacon. | |
| */ | |
| static inline bool ieee80211_is_s1g_short_beacon(__le16 fc, const u8 *variable, | |
| size_t variable_len) | |
| { | |
| if (!ieee80211_is_s1g_beacon(fc)) | |
| return false; | |
| /* | |
| * If the frame does not contain at least 1 element (this is perfectly | |
| * valid in a short beacon) and is an S1G beacon, we have a short | |
| * beacon. | |
| */ | |
| if (variable_len < 2) | |
| return true; | |
| return variable[0] != WLAN_EID_S1G_BCN_COMPAT; | |
| } | |
| struct element { | |
| u8 id; | |
| u8 datalen; | |
| u8 data[]; | |
| } __packed; | |
| /* element iteration helpers */ | |
| #define for_each_element(_elem, _data, _datalen) \ | |
| for (_elem = (const struct element *)(_data); \ | |
| (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \ | |
| (int)sizeof(*_elem) && \ | |
| (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \ | |
| (int)sizeof(*_elem) + _elem->datalen; \ | |
| _elem = (const struct element *)(_elem->data + _elem->datalen)) | |
| #define for_each_element_id(element, _id, data, datalen) \ | |
| for_each_element(element, data, datalen) \ | |
| if (element->id == (_id)) | |
| #define for_each_element_extid(element, extid, _data, _datalen) \ | |
| for_each_element(element, _data, _datalen) \ | |
| if (element->id == WLAN_EID_EXTENSION && \ | |
| element->datalen > 0 && \ | |
| element->data[0] == (extid)) | |
| #define for_each_subelement(sub, element) \ | |
| for_each_element(sub, (element)->data, (element)->datalen) | |
| #define for_each_subelement_id(sub, id, element) \ | |
| for_each_element_id(sub, id, (element)->data, (element)->datalen) | |
| #define for_each_subelement_extid(sub, extid, element) \ | |
| for_each_element_extid(sub, extid, (element)->data, (element)->datalen) | |
| /** | |
| * for_each_element_completed - determine if element parsing consumed all data | |
| * @element: element pointer after for_each_element() or friends | |
| * @data: same data pointer as passed to for_each_element() or friends | |
| * @datalen: same data length as passed to for_each_element() or friends | |
| * Return: %true if all elements were iterated, %false otherwise; see notes | |
| * | |
| * This function returns %true if all the data was parsed or considered | |
| * while walking the elements. Only use this if your for_each_element() | |
| * loop cannot be broken out of, otherwise it always returns %false. | |
| * | |
| * If some data was malformed, this returns %false since the last parsed | |
| * element will not fill the whole remaining data. | |
| */ | |
| static inline bool for_each_element_completed(const struct element *element, | |
| const void *data, size_t datalen) | |
| { | |
| return (const u8 *)element == (const u8 *)data + datalen; | |
| } | |
| /* | |
| * RSNX Capabilities: | |
| * bits 0-3: Field length (n-1) | |
| */ | |
| #define WLAN_RSNX_CAPA_PROTECTED_TWT BIT(4) | |
| #define WLAN_RSNX_CAPA_SAE_H2E BIT(5) | |
| /* | |
| * reduced neighbor report, based on Draft P802.11ax_D6.1, | |
| * section 9.4.2.170 and accepted contributions. | |
| */ | |
| #define IEEE80211_AP_INFO_TBTT_HDR_TYPE 0x03 | |
| #define IEEE80211_AP_INFO_TBTT_HDR_FILTERED 0x04 | |
| #define IEEE80211_AP_INFO_TBTT_HDR_COLOC 0x08 | |
| #define IEEE80211_AP_INFO_TBTT_HDR_COUNT 0xF0 | |
| #define IEEE80211_TBTT_INFO_TYPE_TBTT 0 | |
| #define IEEE80211_TBTT_INFO_TYPE_MLD 1 | |
| #define IEEE80211_RNR_TBTT_PARAMS_OCT_RECOMMENDED 0x01 | |
| #define IEEE80211_RNR_TBTT_PARAMS_SAME_SSID 0x02 | |
| #define IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID 0x04 | |
| #define IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID 0x08 | |
| #define IEEE80211_RNR_TBTT_PARAMS_COLOC_ESS 0x10 | |
| #define IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE 0x20 | |
| #define IEEE80211_RNR_TBTT_PARAMS_COLOC_AP 0x40 | |
| #define IEEE80211_RNR_TBTT_PARAMS_PSD_NO_LIMIT 127 | |
| #define IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED -128 | |
| struct ieee80211_neighbor_ap_info { | |
| u8 tbtt_info_hdr; | |
| u8 tbtt_info_len; | |
| u8 op_class; | |
| u8 channel; | |
| } __packed; | |
| enum ieee80211_range_params_max_total_ltf { | |
| IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_4 = 0, | |
| IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_8, | |
| IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_16, | |
| IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_UNSPECIFIED, | |
| }; | |
| /* | |
| * reduced neighbor report, based on Draft P802.11be_D3.0, | |
| * section 9.4.2.170.2. | |
| */ | |
| struct ieee80211_rnr_mld_params { | |
| u8 mld_id; | |
| __le16 params; | |
| } __packed; | |
| #define IEEE80211_RNR_MLD_PARAMS_LINK_ID 0x000F | |
| #define IEEE80211_RNR_MLD_PARAMS_BSS_CHANGE_COUNT 0x0FF0 | |
| #define IEEE80211_RNR_MLD_PARAMS_UPDATES_INCLUDED 0x1000 | |
| #define IEEE80211_RNR_MLD_PARAMS_DISABLED_LINK 0x2000 | |
| /* Format of the TBTT information element if it has 7, 8 or 9 bytes */ | |
| struct ieee80211_tbtt_info_7_8_9 { | |
| u8 tbtt_offset; | |
| u8 bssid[ETH_ALEN]; | |
| /* The following element is optional, structure may not grow */ | |
| u8 bss_params; | |
| s8 psd_20; | |
| } __packed; | |
| /* Format of the TBTT information element if it has >= 11 bytes */ | |
| struct ieee80211_tbtt_info_ge_11 { | |
| u8 tbtt_offset; | |
| u8 bssid[ETH_ALEN]; | |
| __le32 short_ssid; | |
| /* The following elements are optional, structure may grow */ | |
| u8 bss_params; | |
| s8 psd_20; | |
| struct ieee80211_rnr_mld_params mld_params; | |
| } __packed; | |
| /* NAN operation mode, as defined in Wi-Fi Aware (TM) specification Table 81 */ | |
| #define NAN_OP_MODE_PHY_MODE_VHT 0x01 | |
| #define NAN_OP_MODE_PHY_MODE_HE 0x10 | |
| #define NAN_OP_MODE_PHY_MODE_MASK 0x11 | |
| #define NAN_OP_MODE_80P80MHZ 0x02 | |
| #define NAN_OP_MODE_160MHZ 0x04 | |
| #define NAN_OP_MODE_PNDL_SUPPRTED 0x08 | |
| /* NAN Device capabilities, as defined in Wi-Fi Aware (TM) specification | |
| * Table 79 | |
| */ | |
| #define NAN_DEV_CAPA_DFS_OWNER 0x01 | |
| #define NAN_DEV_CAPA_EXT_KEY_ID_SUPPORTED 0x02 | |
| #define NAN_DEV_CAPA_SIM_NDP_RX_SUPPORTED 0x04 | |
| #define NAN_DEV_CAPA_NDPE_SUPPORTED 0x08 | |
| #define NAN_DEV_CAPA_S3_SUPPORTED 0x10 | |
| #include "ieee80211-ht.h" | |
| #include "ieee80211-vht.h" | |
| #include "ieee80211-he.h" | |
| #include "ieee80211-eht.h" | |
| #include "ieee80211-mesh.h" | |
| #endif /* LINUX_IEEE80211_H */ |