| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * Copyright 2019 Google LLC | |
| */ | |
| #ifndef __LINUX_BLK_CRYPTO_H | |
| #define __LINUX_BLK_CRYPTO_H | |
| #include <linux/minmax.h> | |
| #include <linux/types.h> | |
| #include <uapi/linux/blk-crypto.h> | |
| enum blk_crypto_mode_num { | |
| BLK_ENCRYPTION_MODE_INVALID, | |
| BLK_ENCRYPTION_MODE_AES_256_XTS, | |
| BLK_ENCRYPTION_MODE_AES_128_CBC_ESSIV, | |
| BLK_ENCRYPTION_MODE_ADIANTUM, | |
| BLK_ENCRYPTION_MODE_SM4_XTS, | |
| BLK_ENCRYPTION_MODE_MAX, | |
| }; | |
| /* | |
| * Supported types of keys. Must be bitflags due to their use in | |
| * blk_crypto_profile::key_types_supported. | |
| */ | |
| enum blk_crypto_key_type { | |
| /* | |
| * Raw keys (i.e. "software keys"). These keys are simply kept in raw, | |
| * plaintext form in kernel memory. | |
| */ | |
| BLK_CRYPTO_KEY_TYPE_RAW = 0x1, | |
| /* | |
| * Hardware-wrapped keys. These keys are only present in kernel memory | |
| * in ephemerally-wrapped form, and they can only be unwrapped by | |
| * dedicated hardware. For details, see the "Hardware-wrapped keys" | |
| * section of Documentation/block/inline-encryption.rst. | |
| */ | |
| BLK_CRYPTO_KEY_TYPE_HW_WRAPPED = 0x2, | |
| }; | |
| /* | |
| * Currently the maximum raw key size is 64 bytes, as that is the key size of | |
| * BLK_ENCRYPTION_MODE_AES_256_XTS which takes the longest key. | |
| * | |
| * The maximum hardware-wrapped key size depends on the hardware's key wrapping | |
| * algorithm, which is a hardware implementation detail, so it isn't precisely | |
| * specified. But currently 128 bytes is plenty in practice. Implementations | |
| * are recommended to wrap a 32-byte key for the hardware KDF with AES-256-GCM, | |
| * which should result in a size closer to 64 bytes than 128. | |
| * | |
| * Both of these values can trivially be increased if ever needed. | |
| */ | |
| #define BLK_CRYPTO_MAX_RAW_KEY_SIZE 64 | |
| #define BLK_CRYPTO_MAX_HW_WRAPPED_KEY_SIZE 128 | |
| #define BLK_CRYPTO_MAX_ANY_KEY_SIZE \ | |
| MAX(BLK_CRYPTO_MAX_RAW_KEY_SIZE, BLK_CRYPTO_MAX_HW_WRAPPED_KEY_SIZE) | |
| /* | |
| * Size of the "software secret" which can be derived from a hardware-wrapped | |
| * key. This is currently always 32 bytes. Note, the choice of 32 bytes | |
| * assumes that the software secret is only used directly for algorithms that | |
| * don't require more than a 256-bit key to get the desired security strength. | |
| * If it were to be used e.g. directly as an AES-256-XTS key, then this would | |
| * need to be increased (which is possible if hardware supports it, but care | |
| * would need to be taken to avoid breaking users who need exactly 32 bytes). | |
| */ | |
| #define BLK_CRYPTO_SW_SECRET_SIZE 32 | |
| /** | |
| * struct blk_crypto_config - an inline encryption key's crypto configuration | |
| * @crypto_mode: encryption algorithm this key is for | |
| * @data_unit_size: the data unit size for all encryption/decryptions with this | |
| * key. This is the size in bytes of each individual plaintext and | |
| * ciphertext. This is always a power of 2. It might be e.g. the | |
| * filesystem block size or the disk sector size. | |
| * @dun_bytes: the maximum number of bytes of DUN used when using this key | |
| * @key_type: the type of this key -- either raw or hardware-wrapped | |
| */ | |
| struct blk_crypto_config { | |
| enum blk_crypto_mode_num crypto_mode; | |
| unsigned int data_unit_size; | |
| unsigned int dun_bytes; | |
| enum blk_crypto_key_type key_type; | |
| }; | |
| /** | |
| * struct blk_crypto_key - an inline encryption key | |
| * @crypto_cfg: the crypto mode, data unit size, key type, and other | |
| * characteristics of this key and how it will be used | |
| * @data_unit_size_bits: log2 of data_unit_size | |
| * @size: size of this key in bytes. The size of a raw key is fixed for a given | |
| * crypto mode, but the size of a hardware-wrapped key can vary. | |
| * @bytes: the bytes of this key. Only the first @size bytes are significant. | |
| * | |
| * A blk_crypto_key is immutable once created, and many bios can reference it at | |
| * the same time. It must not be freed until all bios using it have completed | |
| * and it has been evicted from all devices on which it may have been used. | |
| */ | |
| struct blk_crypto_key { | |
| struct blk_crypto_config crypto_cfg; | |
| unsigned int data_unit_size_bits; | |
| unsigned int size; | |
| u8 bytes[BLK_CRYPTO_MAX_ANY_KEY_SIZE]; | |
| }; | |
| #define BLK_CRYPTO_MAX_IV_SIZE 32 | |
| #define BLK_CRYPTO_DUN_ARRAY_SIZE (BLK_CRYPTO_MAX_IV_SIZE / sizeof(u64)) | |
| /** | |
| * struct bio_crypt_ctx - an inline encryption context | |
| * @bc_key: the key, algorithm, and data unit size to use | |
| * @bc_dun: the data unit number (starting IV) to use | |
| * | |
| * A bio_crypt_ctx specifies that the contents of the bio will be encrypted (for | |
| * write requests) or decrypted (for read requests) inline by the storage device | |
| * or controller, or by the crypto API fallback. | |
| */ | |
| struct bio_crypt_ctx { | |
| const struct blk_crypto_key *bc_key; | |
| u64 bc_dun[BLK_CRYPTO_DUN_ARRAY_SIZE]; | |
| }; | |
| #include <linux/blk_types.h> | |
| #include <linux/blkdev.h> | |
| #ifdef CONFIG_BLK_INLINE_ENCRYPTION | |
| static inline bool bio_has_crypt_ctx(struct bio *bio) | |
| { | |
| return bio->bi_crypt_context; | |
| } | |
| void bio_crypt_set_ctx(struct bio *bio, const struct blk_crypto_key *key, | |
| const u64 dun[BLK_CRYPTO_DUN_ARRAY_SIZE], | |
| gfp_t gfp_mask); | |
| bool bio_crypt_dun_is_contiguous(const struct bio_crypt_ctx *bc, | |
| unsigned int bytes, | |
| const u64 next_dun[BLK_CRYPTO_DUN_ARRAY_SIZE]); | |
| int blk_crypto_init_key(struct blk_crypto_key *blk_key, | |
| const u8 *key_bytes, size_t key_size, | |
| enum blk_crypto_key_type key_type, | |
| enum blk_crypto_mode_num crypto_mode, | |
| unsigned int dun_bytes, | |
| unsigned int data_unit_size); | |
| int blk_crypto_start_using_key(struct block_device *bdev, | |
| const struct blk_crypto_key *key); | |
| void blk_crypto_evict_key(struct block_device *bdev, | |
| const struct blk_crypto_key *key); | |
| bool blk_crypto_config_supported_natively(struct block_device *bdev, | |
| const struct blk_crypto_config *cfg); | |
| bool blk_crypto_config_supported(struct block_device *bdev, | |
| const struct blk_crypto_config *cfg); | |
| int blk_crypto_derive_sw_secret(struct block_device *bdev, | |
| const u8 *eph_key, size_t eph_key_size, | |
| u8 sw_secret[BLK_CRYPTO_SW_SECRET_SIZE]); | |
| #else /* CONFIG_BLK_INLINE_ENCRYPTION */ | |
| static inline bool bio_has_crypt_ctx(struct bio *bio) | |
| { | |
| return false; | |
| } | |
| #endif /* CONFIG_BLK_INLINE_ENCRYPTION */ | |
| int __bio_crypt_clone(struct bio *dst, struct bio *src, gfp_t gfp_mask); | |
| /** | |
| * bio_crypt_clone - clone bio encryption context | |
| * @dst: destination bio | |
| * @src: source bio | |
| * @gfp_mask: memory allocation flags | |
| * | |
| * If @src has an encryption context, clone it to @dst. | |
| * | |
| * Return: 0 on success, -ENOMEM if out of memory. -ENOMEM is only possible if | |
| * @gfp_mask doesn't include %__GFP_DIRECT_RECLAIM. | |
| */ | |
| static inline int bio_crypt_clone(struct bio *dst, struct bio *src, | |
| gfp_t gfp_mask) | |
| { | |
| if (bio_has_crypt_ctx(src)) | |
| return __bio_crypt_clone(dst, src, gfp_mask); | |
| return 0; | |
| } | |
| #endif /* __LINUX_BLK_CRYPTO_H */ |