| // SPDX-License-Identifier: GPL-2.0 | |
| use kernel::{device, devres::Devres, error::code::*, fmt, pci, prelude::*, sync::Arc}; | |
| use crate::driver::Bar0; | |
| use crate::falcon::{gsp::Gsp as GspFalcon, sec2::Sec2 as Sec2Falcon, Falcon}; | |
| use crate::fb::SysmemFlush; | |
| use crate::gfw; | |
| use crate::gsp::Gsp; | |
| use crate::regs; | |
| macro_rules! define_chipset { | |
| ({ $($variant:ident = $value:expr),* $(,)* }) => | |
| { | |
| /// Enum representation of the GPU chipset. | |
| #[derive(fmt::Debug, Copy, Clone, PartialOrd, Ord, PartialEq, Eq)] | |
| pub(crate) enum Chipset { | |
| $($variant = $value),*, | |
| } | |
| impl Chipset { | |
| pub(crate) const ALL: &'static [Chipset] = &[ | |
| $( Chipset::$variant, )* | |
| ]; | |
| ::kernel::macros::paste!( | |
| /// Returns the name of this chipset, in lowercase. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ``` | |
| /// let chipset = Chipset::GA102; | |
| /// assert_eq!(chipset.name(), "ga102"); | |
| /// ``` | |
| pub(crate) const fn name(&self) -> &'static str { | |
| match *self { | |
| $( | |
| Chipset::$variant => stringify!([<$variant:lower>]), | |
| )* | |
| } | |
| } | |
| ); | |
| } | |
| // TODO[FPRI]: replace with something like derive(FromPrimitive) | |
| impl TryFrom<u32> for Chipset { | |
| type Error = kernel::error::Error; | |
| fn try_from(value: u32) -> Result<Self, Self::Error> { | |
| match value { | |
| $( $value => Ok(Chipset::$variant), )* | |
| _ => Err(ENODEV), | |
| } | |
| } | |
| } | |
| } | |
| } | |
| define_chipset!({ | |
| // Turing | |
| TU102 = 0x162, | |
| TU104 = 0x164, | |
| TU106 = 0x166, | |
| TU117 = 0x167, | |
| TU116 = 0x168, | |
| // Ampere | |
| GA100 = 0x170, | |
| GA102 = 0x172, | |
| GA103 = 0x173, | |
| GA104 = 0x174, | |
| GA106 = 0x176, | |
| GA107 = 0x177, | |
| // Ada | |
| AD102 = 0x192, | |
| AD103 = 0x193, | |
| AD104 = 0x194, | |
| AD106 = 0x196, | |
| AD107 = 0x197, | |
| }); | |
| impl Chipset { | |
| pub(crate) fn arch(&self) -> Architecture { | |
| match self { | |
| Self::TU102 | Self::TU104 | Self::TU106 | Self::TU117 | Self::TU116 => { | |
| Architecture::Turing | |
| } | |
| Self::GA100 | Self::GA102 | Self::GA103 | Self::GA104 | Self::GA106 | Self::GA107 => { | |
| Architecture::Ampere | |
| } | |
| Self::AD102 | Self::AD103 | Self::AD104 | Self::AD106 | Self::AD107 => { | |
| Architecture::Ada | |
| } | |
| } | |
| } | |
| } | |
| // TODO | |
| // | |
| // The resulting strings are used to generate firmware paths, hence the | |
| // generated strings have to be stable. | |
| // | |
| // Hence, replace with something like strum_macros derive(Display). | |
| // | |
| // For now, redirect to fmt::Debug for convenience. | |
| impl fmt::Display for Chipset { | |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { | |
| write!(f, "{self:?}") | |
| } | |
| } | |
| /// Enum representation of the GPU generation. | |
| #[derive(fmt::Debug)] | |
| pub(crate) enum Architecture { | |
| Turing = 0x16, | |
| Ampere = 0x17, | |
| Ada = 0x19, | |
| } | |
| impl TryFrom<u8> for Architecture { | |
| type Error = Error; | |
| fn try_from(value: u8) -> Result<Self> { | |
| match value { | |
| 0x16 => Ok(Self::Turing), | |
| 0x17 => Ok(Self::Ampere), | |
| 0x19 => Ok(Self::Ada), | |
| _ => Err(ENODEV), | |
| } | |
| } | |
| } | |
| pub(crate) struct Revision { | |
| major: u8, | |
| minor: u8, | |
| } | |
| impl Revision { | |
| fn from_boot0(boot0: regs::NV_PMC_BOOT_0) -> Self { | |
| Self { | |
| major: boot0.major_revision(), | |
| minor: boot0.minor_revision(), | |
| } | |
| } | |
| } | |
| impl fmt::Display for Revision { | |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { | |
| write!(f, "{:x}.{:x}", self.major, self.minor) | |
| } | |
| } | |
| /// Structure holding the metadata of the GPU. | |
| pub(crate) struct Spec { | |
| chipset: Chipset, | |
| /// The revision of the chipset. | |
| revision: Revision, | |
| } | |
| impl Spec { | |
| fn new(bar: &Bar0) -> Result<Spec> { | |
| let boot0 = regs::NV_PMC_BOOT_0::read(bar); | |
| Ok(Self { | |
| chipset: boot0.chipset()?, | |
| revision: Revision::from_boot0(boot0), | |
| }) | |
| } | |
| } | |
| /// Structure holding the resources required to operate the GPU. | |
| #[pin_data] | |
| pub(crate) struct Gpu { | |
| spec: Spec, | |
| /// MMIO mapping of PCI BAR 0 | |
| bar: Arc<Devres<Bar0>>, | |
| /// System memory page required for flushing all pending GPU-side memory writes done through | |
| /// PCIE into system memory, via sysmembar (A GPU-initiated HW memory-barrier operation). | |
| sysmem_flush: SysmemFlush, | |
| /// GSP falcon instance, used for GSP boot up and cleanup. | |
| gsp_falcon: Falcon<GspFalcon>, | |
| /// SEC2 falcon instance, used for GSP boot up and cleanup. | |
| sec2_falcon: Falcon<Sec2Falcon>, | |
| /// GSP runtime data. Temporarily an empty placeholder. | |
| #[pin] | |
| gsp: Gsp, | |
| } | |
| impl Gpu { | |
| pub(crate) fn new<'a>( | |
| pdev: &'a pci::Device<device::Bound>, | |
| devres_bar: Arc<Devres<Bar0>>, | |
| bar: &'a Bar0, | |
| ) -> impl PinInit<Self, Error> + 'a { | |
| try_pin_init!(Self { | |
| spec: Spec::new(bar).inspect(|spec| { | |
| dev_info!( | |
| pdev.as_ref(), | |
| "NVIDIA (Chipset: {}, Architecture: {:?}, Revision: {})\n", | |
| spec.chipset, | |
| spec.chipset.arch(), | |
| spec.revision | |
| ); | |
| })?, | |
| // We must wait for GFW_BOOT completion before doing any significant setup on the GPU. | |
| _: { | |
| gfw::wait_gfw_boot_completion(bar) | |
| .inspect_err(|_| dev_err!(pdev.as_ref(), "GFW boot did not complete"))?; | |
| }, | |
| sysmem_flush: SysmemFlush::register(pdev.as_ref(), bar, spec.chipset)?, | |
| gsp_falcon: Falcon::new( | |
| pdev.as_ref(), | |
| spec.chipset, | |
| bar, | |
| spec.chipset > Chipset::GA100, | |
| ) | |
| .inspect(|falcon| falcon.clear_swgen0_intr(bar))?, | |
| sec2_falcon: Falcon::new(pdev.as_ref(), spec.chipset, bar, true)?, | |
| gsp <- Gsp::new(), | |
| _: { gsp.boot(pdev, bar, spec.chipset, gsp_falcon, sec2_falcon)? }, | |
| bar: devres_bar, | |
| }) | |
| } | |
| /// Called when the corresponding [`Device`](device::Device) is unbound. | |
| /// | |
| /// Note: This method must only be called from `Driver::unbind`. | |
| pub(crate) fn unbind(&self, dev: &device::Device<device::Core>) { | |
| kernel::warn_on!(self | |
| .bar | |
| .access(dev) | |
| .inspect(|bar| self.sysmem_flush.unregister(bar)) | |
| .is_err()); | |
| } | |
| } |