| // SPDX-License-Identifier: MIT | |
| /* | |
| * Copyright © 2021 Intel Corporation | |
| */ | |
| #include "xe_device.h" | |
| #include <linux/aperture.h> | |
| #include <linux/delay.h> | |
| #include <linux/fault-inject.h> | |
| #include <linux/units.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_client.h> | |
| #include <drm/drm_gem_ttm_helper.h> | |
| #include <drm/drm_ioctl.h> | |
| #include <drm/drm_managed.h> | |
| #include <drm/drm_print.h> | |
| #include <uapi/drm/xe_drm.h> | |
| #include "display/xe_display.h" | |
| #include "instructions/xe_gpu_commands.h" | |
| #include "regs/xe_gt_regs.h" | |
| #include "regs/xe_regs.h" | |
| #include "xe_bo.h" | |
| #include "xe_bo_evict.h" | |
| #include "xe_debugfs.h" | |
| #include "xe_devcoredump.h" | |
| #include "xe_device_sysfs.h" | |
| #include "xe_dma_buf.h" | |
| #include "xe_drm_client.h" | |
| #include "xe_drv.h" | |
| #include "xe_exec.h" | |
| #include "xe_exec_queue.h" | |
| #include "xe_force_wake.h" | |
| #include "xe_ggtt.h" | |
| #include "xe_gsc_proxy.h" | |
| #include "xe_gt.h" | |
| #include "xe_gt_mcr.h" | |
| #include "xe_gt_printk.h" | |
| #include "xe_gt_sriov_vf.h" | |
| #include "xe_guc.h" | |
| #include "xe_guc_pc.h" | |
| #include "xe_hw_engine_group.h" | |
| #include "xe_hwmon.h" | |
| #include "xe_i2c.h" | |
| #include "xe_irq.h" | |
| #include "xe_late_bind_fw.h" | |
| #include "xe_mmio.h" | |
| #include "xe_module.h" | |
| #include "xe_nvm.h" | |
| #include "xe_oa.h" | |
| #include "xe_observation.h" | |
| #include "xe_pat.h" | |
| #include "xe_pcode.h" | |
| #include "xe_pm.h" | |
| #include "xe_pmu.h" | |
| #include "xe_psmi.h" | |
| #include "xe_pxp.h" | |
| #include "xe_query.h" | |
| #include "xe_shrinker.h" | |
| #include "xe_survivability_mode.h" | |
| #include "xe_sriov.h" | |
| #include "xe_tile.h" | |
| #include "xe_ttm_stolen_mgr.h" | |
| #include "xe_ttm_sys_mgr.h" | |
| #include "xe_vm.h" | |
| #include "xe_vm_madvise.h" | |
| #include "xe_vram.h" | |
| #include "xe_vram_types.h" | |
| #include "xe_vsec.h" | |
| #include "xe_wait_user_fence.h" | |
| #include "xe_wa.h" | |
| #include <generated/xe_device_wa_oob.h> | |
| #include <generated/xe_wa_oob.h> | |
| static int xe_file_open(struct drm_device *dev, struct drm_file *file) | |
| { | |
| struct xe_device *xe = to_xe_device(dev); | |
| struct xe_drm_client *client; | |
| struct xe_file *xef; | |
| int ret = -ENOMEM; | |
| struct task_struct *task = NULL; | |
| xef = kzalloc(sizeof(*xef), GFP_KERNEL); | |
| if (!xef) | |
| return ret; | |
| client = xe_drm_client_alloc(); | |
| if (!client) { | |
| kfree(xef); | |
| return ret; | |
| } | |
| xef->drm = file; | |
| xef->client = client; | |
| xef->xe = xe; | |
| mutex_init(&xef->vm.lock); | |
| xa_init_flags(&xef->vm.xa, XA_FLAGS_ALLOC1); | |
| mutex_init(&xef->exec_queue.lock); | |
| xa_init_flags(&xef->exec_queue.xa, XA_FLAGS_ALLOC1); | |
| file->driver_priv = xef; | |
| kref_init(&xef->refcount); | |
| task = get_pid_task(rcu_access_pointer(file->pid), PIDTYPE_PID); | |
| if (task) { | |
| xef->process_name = kstrdup(task->comm, GFP_KERNEL); | |
| xef->pid = task->pid; | |
| put_task_struct(task); | |
| } | |
| return 0; | |
| } | |
| static void xe_file_destroy(struct kref *ref) | |
| { | |
| struct xe_file *xef = container_of(ref, struct xe_file, refcount); | |
| xa_destroy(&xef->exec_queue.xa); | |
| mutex_destroy(&xef->exec_queue.lock); | |
| xa_destroy(&xef->vm.xa); | |
| mutex_destroy(&xef->vm.lock); | |
| xe_drm_client_put(xef->client); | |
| kfree(xef->process_name); | |
| kfree(xef); | |
| } | |
| /** | |
| * xe_file_get() - Take a reference to the xe file object | |
| * @xef: Pointer to the xe file | |
| * | |
| * Anyone with a pointer to xef must take a reference to the xe file | |
| * object using this call. | |
| * | |
| * Return: xe file pointer | |
| */ | |
| struct xe_file *xe_file_get(struct xe_file *xef) | |
| { | |
| kref_get(&xef->refcount); | |
| return xef; | |
| } | |
| /** | |
| * xe_file_put() - Drop a reference to the xe file object | |
| * @xef: Pointer to the xe file | |
| * | |
| * Used to drop reference to the xef object | |
| */ | |
| void xe_file_put(struct xe_file *xef) | |
| { | |
| kref_put(&xef->refcount, xe_file_destroy); | |
| } | |
| static void xe_file_close(struct drm_device *dev, struct drm_file *file) | |
| { | |
| struct xe_device *xe = to_xe_device(dev); | |
| struct xe_file *xef = file->driver_priv; | |
| struct xe_vm *vm; | |
| struct xe_exec_queue *q; | |
| unsigned long idx; | |
| xe_pm_runtime_get(xe); | |
| /* | |
| * No need for exec_queue.lock here as there is no contention for it | |
| * when FD is closing as IOCTLs presumably can't be modifying the | |
| * xarray. Taking exec_queue.lock here causes undue dependency on | |
| * vm->lock taken during xe_exec_queue_kill(). | |
| */ | |
| xa_for_each(&xef->exec_queue.xa, idx, q) { | |
| if (q->vm && q->hwe->hw_engine_group) | |
| xe_hw_engine_group_del_exec_queue(q->hwe->hw_engine_group, q); | |
| xe_exec_queue_kill(q); | |
| xe_exec_queue_put(q); | |
| } | |
| xa_for_each(&xef->vm.xa, idx, vm) | |
| xe_vm_close_and_put(vm); | |
| xe_file_put(xef); | |
| xe_pm_runtime_put(xe); | |
| } | |
| static const struct drm_ioctl_desc xe_ioctls[] = { | |
| DRM_IOCTL_DEF_DRV(XE_DEVICE_QUERY, xe_query_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_GEM_CREATE, xe_gem_create_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_GEM_MMAP_OFFSET, xe_gem_mmap_offset_ioctl, | |
| DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_VM_CREATE, xe_vm_create_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_VM_DESTROY, xe_vm_destroy_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_VM_BIND, xe_vm_bind_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_EXEC, xe_exec_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_EXEC_QUEUE_CREATE, xe_exec_queue_create_ioctl, | |
| DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_EXEC_QUEUE_DESTROY, xe_exec_queue_destroy_ioctl, | |
| DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_EXEC_QUEUE_GET_PROPERTY, xe_exec_queue_get_property_ioctl, | |
| DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_WAIT_USER_FENCE, xe_wait_user_fence_ioctl, | |
| DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_OBSERVATION, xe_observation_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_MADVISE, xe_vm_madvise_ioctl, DRM_RENDER_ALLOW), | |
| DRM_IOCTL_DEF_DRV(XE_VM_QUERY_MEM_RANGE_ATTRS, xe_vm_query_vmas_attrs_ioctl, | |
| DRM_RENDER_ALLOW), | |
| }; | |
| static long xe_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| struct drm_file *file_priv = file->private_data; | |
| struct xe_device *xe = to_xe_device(file_priv->minor->dev); | |
| long ret; | |
| if (xe_device_wedged(xe)) | |
| return -ECANCELED; | |
| ret = xe_pm_runtime_get_ioctl(xe); | |
| if (ret >= 0) | |
| ret = drm_ioctl(file, cmd, arg); | |
| xe_pm_runtime_put(xe); | |
| return ret; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| static long xe_drm_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| struct drm_file *file_priv = file->private_data; | |
| struct xe_device *xe = to_xe_device(file_priv->minor->dev); | |
| long ret; | |
| if (xe_device_wedged(xe)) | |
| return -ECANCELED; | |
| ret = xe_pm_runtime_get_ioctl(xe); | |
| if (ret >= 0) | |
| ret = drm_compat_ioctl(file, cmd, arg); | |
| xe_pm_runtime_put(xe); | |
| return ret; | |
| } | |
| #else | |
| /* similarly to drm_compat_ioctl, let's it be assigned to .compat_ioct unconditionally */ | |
| #define xe_drm_compat_ioctl NULL | |
| #endif | |
| static void barrier_open(struct vm_area_struct *vma) | |
| { | |
| drm_dev_get(vma->vm_private_data); | |
| } | |
| static void barrier_close(struct vm_area_struct *vma) | |
| { | |
| drm_dev_put(vma->vm_private_data); | |
| } | |
| static void barrier_release_dummy_page(struct drm_device *dev, void *res) | |
| { | |
| struct page *dummy_page = (struct page *)res; | |
| __free_page(dummy_page); | |
| } | |
| static vm_fault_t barrier_fault(struct vm_fault *vmf) | |
| { | |
| struct drm_device *dev = vmf->vma->vm_private_data; | |
| struct vm_area_struct *vma = vmf->vma; | |
| vm_fault_t ret = VM_FAULT_NOPAGE; | |
| pgprot_t prot; | |
| int idx; | |
| prot = vm_get_page_prot(vma->vm_flags); | |
| if (drm_dev_enter(dev, &idx)) { | |
| unsigned long pfn; | |
| #define LAST_DB_PAGE_OFFSET 0x7ff001 | |
| pfn = PHYS_PFN(pci_resource_start(to_pci_dev(dev->dev), 0) + | |
| LAST_DB_PAGE_OFFSET); | |
| ret = vmf_insert_pfn_prot(vma, vma->vm_start, pfn, | |
| pgprot_noncached(prot)); | |
| drm_dev_exit(idx); | |
| } else { | |
| struct page *page; | |
| /* Allocate new dummy page to map all the VA range in this VMA to it*/ | |
| page = alloc_page(GFP_KERNEL | __GFP_ZERO); | |
| if (!page) | |
| return VM_FAULT_OOM; | |
| /* Set the page to be freed using drmm release action */ | |
| if (drmm_add_action_or_reset(dev, barrier_release_dummy_page, page)) | |
| return VM_FAULT_OOM; | |
| ret = vmf_insert_pfn_prot(vma, vma->vm_start, page_to_pfn(page), | |
| prot); | |
| } | |
| return ret; | |
| } | |
| static const struct vm_operations_struct vm_ops_barrier = { | |
| .open = barrier_open, | |
| .close = barrier_close, | |
| .fault = barrier_fault, | |
| }; | |
| static int xe_pci_barrier_mmap(struct file *filp, | |
| struct vm_area_struct *vma) | |
| { | |
| struct drm_file *priv = filp->private_data; | |
| struct drm_device *dev = priv->minor->dev; | |
| struct xe_device *xe = to_xe_device(dev); | |
| if (!IS_DGFX(xe)) | |
| return -EINVAL; | |
| if (vma->vm_end - vma->vm_start > SZ_4K) | |
| return -EINVAL; | |
| if (is_cow_mapping(vma->vm_flags)) | |
| return -EINVAL; | |
| if (vma->vm_flags & (VM_READ | VM_EXEC)) | |
| return -EINVAL; | |
| vm_flags_clear(vma, VM_MAYREAD | VM_MAYEXEC); | |
| vm_flags_set(vma, VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP | VM_IO); | |
| vma->vm_ops = &vm_ops_barrier; | |
| vma->vm_private_data = dev; | |
| drm_dev_get(vma->vm_private_data); | |
| return 0; | |
| } | |
| static int xe_mmap(struct file *filp, struct vm_area_struct *vma) | |
| { | |
| struct drm_file *priv = filp->private_data; | |
| struct drm_device *dev = priv->minor->dev; | |
| if (drm_dev_is_unplugged(dev)) | |
| return -ENODEV; | |
| switch (vma->vm_pgoff) { | |
| case XE_PCI_BARRIER_MMAP_OFFSET >> XE_PTE_SHIFT: | |
| return xe_pci_barrier_mmap(filp, vma); | |
| } | |
| return drm_gem_mmap(filp, vma); | |
| } | |
| static const struct file_operations xe_driver_fops = { | |
| .owner = THIS_MODULE, | |
| .open = drm_open, | |
| .release = drm_release_noglobal, | |
| .unlocked_ioctl = xe_drm_ioctl, | |
| .mmap = xe_mmap, | |
| .poll = drm_poll, | |
| .read = drm_read, | |
| .compat_ioctl = xe_drm_compat_ioctl, | |
| .llseek = noop_llseek, | |
| #ifdef CONFIG_PROC_FS | |
| .show_fdinfo = drm_show_fdinfo, | |
| #endif | |
| .fop_flags = FOP_UNSIGNED_OFFSET, | |
| }; | |
| static struct drm_driver driver = { | |
| /* Don't use MTRRs here; the Xserver or userspace app should | |
| * deal with them for Intel hardware. | |
| */ | |
| .driver_features = | |
| DRIVER_GEM | | |
| DRIVER_RENDER | DRIVER_SYNCOBJ | | |
| DRIVER_SYNCOBJ_TIMELINE | DRIVER_GEM_GPUVA, | |
| .open = xe_file_open, | |
| .postclose = xe_file_close, | |
| .gem_prime_import = xe_gem_prime_import, | |
| .dumb_create = xe_bo_dumb_create, | |
| .dumb_map_offset = drm_gem_ttm_dumb_map_offset, | |
| #ifdef CONFIG_PROC_FS | |
| .show_fdinfo = xe_drm_client_fdinfo, | |
| #endif | |
| .ioctls = xe_ioctls, | |
| .num_ioctls = ARRAY_SIZE(xe_ioctls), | |
| .fops = &xe_driver_fops, | |
| .name = DRIVER_NAME, | |
| .desc = DRIVER_DESC, | |
| .major = DRIVER_MAJOR, | |
| .minor = DRIVER_MINOR, | |
| .patchlevel = DRIVER_PATCHLEVEL, | |
| }; | |
| static void xe_device_destroy(struct drm_device *dev, void *dummy) | |
| { | |
| struct xe_device *xe = to_xe_device(dev); | |
| xe_bo_dev_fini(&xe->bo_device); | |
| if (xe->preempt_fence_wq) | |
| destroy_workqueue(xe->preempt_fence_wq); | |
| if (xe->ordered_wq) | |
| destroy_workqueue(xe->ordered_wq); | |
| if (xe->unordered_wq) | |
| destroy_workqueue(xe->unordered_wq); | |
| if (xe->destroy_wq) | |
| destroy_workqueue(xe->destroy_wq); | |
| ttm_device_fini(&xe->ttm); | |
| } | |
| struct xe_device *xe_device_create(struct pci_dev *pdev, | |
| const struct pci_device_id *ent) | |
| { | |
| struct xe_device *xe; | |
| int err; | |
| xe_display_driver_set_hooks(&driver); | |
| err = aperture_remove_conflicting_pci_devices(pdev, driver.name); | |
| if (err) | |
| return ERR_PTR(err); | |
| xe = devm_drm_dev_alloc(&pdev->dev, &driver, struct xe_device, drm); | |
| if (IS_ERR(xe)) | |
| return xe; | |
| err = ttm_device_init(&xe->ttm, &xe_ttm_funcs, xe->drm.dev, | |
| xe->drm.anon_inode->i_mapping, | |
| xe->drm.vma_offset_manager, false, false); | |
| if (WARN_ON(err)) | |
| goto err; | |
| xe_bo_dev_init(&xe->bo_device); | |
| err = drmm_add_action_or_reset(&xe->drm, xe_device_destroy, NULL); | |
| if (err) | |
| goto err; | |
| err = xe_shrinker_create(xe); | |
| if (err) | |
| goto err; | |
| xe->info.devid = pdev->device; | |
| xe->info.revid = pdev->revision; | |
| xe->info.force_execlist = xe_modparam.force_execlist; | |
| xe->atomic_svm_timeslice_ms = 5; | |
| err = xe_irq_init(xe); | |
| if (err) | |
| goto err; | |
| xe_validation_device_init(&xe->val); | |
| init_waitqueue_head(&xe->ufence_wq); | |
| init_rwsem(&xe->usm.lock); | |
| xa_init_flags(&xe->usm.asid_to_vm, XA_FLAGS_ALLOC); | |
| if (IS_ENABLED(CONFIG_DRM_XE_DEBUG)) { | |
| /* Trigger a large asid and an early asid wrap. */ | |
| u32 asid; | |
| BUILD_BUG_ON(XE_MAX_ASID < 2); | |
| err = xa_alloc_cyclic(&xe->usm.asid_to_vm, &asid, NULL, | |
| XA_LIMIT(XE_MAX_ASID - 2, XE_MAX_ASID - 1), | |
| &xe->usm.next_asid, GFP_KERNEL); | |
| drm_WARN_ON(&xe->drm, err); | |
| if (err >= 0) | |
| xa_erase(&xe->usm.asid_to_vm, asid); | |
| } | |
| err = xe_bo_pinned_init(xe); | |
| if (err) | |
| goto err; | |
| xe->preempt_fence_wq = alloc_ordered_workqueue("xe-preempt-fence-wq", | |
| WQ_MEM_RECLAIM); | |
| xe->ordered_wq = alloc_ordered_workqueue("xe-ordered-wq", 0); | |
| xe->unordered_wq = alloc_workqueue("xe-unordered-wq", 0, 0); | |
| xe->destroy_wq = alloc_workqueue("xe-destroy-wq", 0, 0); | |
| if (!xe->ordered_wq || !xe->unordered_wq || | |
| !xe->preempt_fence_wq || !xe->destroy_wq) { | |
| /* | |
| * Cleanup done in xe_device_destroy via | |
| * drmm_add_action_or_reset register above | |
| */ | |
| drm_err(&xe->drm, "Failed to allocate xe workqueues\n"); | |
| err = -ENOMEM; | |
| goto err; | |
| } | |
| err = drmm_mutex_init(&xe->drm, &xe->pmt.lock); | |
| if (err) | |
| goto err; | |
| return xe; | |
| err: | |
| return ERR_PTR(err); | |
| } | |
| ALLOW_ERROR_INJECTION(xe_device_create, ERRNO); /* See xe_pci_probe() */ | |
| static bool xe_driver_flr_disabled(struct xe_device *xe) | |
| { | |
| if (IS_SRIOV_VF(xe)) | |
| return true; | |
| if (xe_mmio_read32(xe_root_tile_mmio(xe), GU_CNTL_PROTECTED) & DRIVERINT_FLR_DIS) { | |
| drm_info(&xe->drm, "Driver-FLR disabled by BIOS\n"); | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * The driver-initiated FLR is the highest level of reset that we can trigger | |
| * from within the driver. It is different from the PCI FLR in that it doesn't | |
| * fully reset the SGUnit and doesn't modify the PCI config space and therefore | |
| * it doesn't require a re-enumeration of the PCI BARs. However, the | |
| * driver-initiated FLR does still cause a reset of both GT and display and a | |
| * memory wipe of local and stolen memory, so recovery would require a full HW | |
| * re-init and saving/restoring (or re-populating) the wiped memory. Since we | |
| * perform the FLR as the very last action before releasing access to the HW | |
| * during the driver release flow, we don't attempt recovery at all, because | |
| * if/when a new instance of Xe is bound to the device it will do a full | |
| * re-init anyway. | |
| */ | |
| static void __xe_driver_flr(struct xe_device *xe) | |
| { | |
| const unsigned int flr_timeout = 3 * USEC_PER_SEC; /* specs recommend a 3s wait */ | |
| struct xe_mmio *mmio = xe_root_tile_mmio(xe); | |
| int ret; | |
| drm_dbg(&xe->drm, "Triggering Driver-FLR\n"); | |
| /* | |
| * Make sure any pending FLR requests have cleared by waiting for the | |
| * FLR trigger bit to go to zero. Also clear GU_DEBUG's DRIVERFLR_STATUS | |
| * to make sure it's not still set from a prior attempt (it's a write to | |
| * clear bit). | |
| * Note that we should never be in a situation where a previous attempt | |
| * is still pending (unless the HW is totally dead), but better to be | |
| * safe in case something unexpected happens | |
| */ | |
| ret = xe_mmio_wait32(mmio, GU_CNTL, DRIVERFLR, 0, flr_timeout, NULL, false); | |
| if (ret) { | |
| drm_err(&xe->drm, "Driver-FLR-prepare wait for ready failed! %d\n", ret); | |
| return; | |
| } | |
| xe_mmio_write32(mmio, GU_DEBUG, DRIVERFLR_STATUS); | |
| /* Trigger the actual Driver-FLR */ | |
| xe_mmio_rmw32(mmio, GU_CNTL, 0, DRIVERFLR); | |
| /* Wait for hardware teardown to complete */ | |
| ret = xe_mmio_wait32(mmio, GU_CNTL, DRIVERFLR, 0, flr_timeout, NULL, false); | |
| if (ret) { | |
| drm_err(&xe->drm, "Driver-FLR-teardown wait completion failed! %d\n", ret); | |
| return; | |
| } | |
| /* Wait for hardware/firmware re-init to complete */ | |
| ret = xe_mmio_wait32(mmio, GU_DEBUG, DRIVERFLR_STATUS, DRIVERFLR_STATUS, | |
| flr_timeout, NULL, false); | |
| if (ret) { | |
| drm_err(&xe->drm, "Driver-FLR-reinit wait completion failed! %d\n", ret); | |
| return; | |
| } | |
| /* Clear sticky completion status */ | |
| xe_mmio_write32(mmio, GU_DEBUG, DRIVERFLR_STATUS); | |
| } | |
| static void xe_driver_flr(struct xe_device *xe) | |
| { | |
| if (xe_driver_flr_disabled(xe)) | |
| return; | |
| __xe_driver_flr(xe); | |
| } | |
| static void xe_driver_flr_fini(void *arg) | |
| { | |
| struct xe_device *xe = arg; | |
| if (xe->needs_flr_on_fini) | |
| xe_driver_flr(xe); | |
| } | |
| static void xe_device_sanitize(void *arg) | |
| { | |
| struct xe_device *xe = arg; | |
| struct xe_gt *gt; | |
| u8 id; | |
| for_each_gt(gt, xe, id) | |
| xe_gt_sanitize(gt); | |
| } | |
| static int xe_set_dma_info(struct xe_device *xe) | |
| { | |
| unsigned int mask_size = xe->info.dma_mask_size; | |
| int err; | |
| dma_set_max_seg_size(xe->drm.dev, xe_sg_segment_size(xe->drm.dev)); | |
| err = dma_set_mask(xe->drm.dev, DMA_BIT_MASK(mask_size)); | |
| if (err) | |
| goto mask_err; | |
| err = dma_set_coherent_mask(xe->drm.dev, DMA_BIT_MASK(mask_size)); | |
| if (err) | |
| goto mask_err; | |
| return 0; | |
| mask_err: | |
| drm_err(&xe->drm, "Can't set DMA mask/consistent mask (%d)\n", err); | |
| return err; | |
| } | |
| static bool verify_lmem_ready(struct xe_device *xe) | |
| { | |
| u32 val = xe_mmio_read32(xe_root_tile_mmio(xe), GU_CNTL) & LMEM_INIT; | |
| return !!val; | |
| } | |
| static int wait_for_lmem_ready(struct xe_device *xe) | |
| { | |
| unsigned long timeout, start; | |
| if (!IS_DGFX(xe)) | |
| return 0; | |
| if (IS_SRIOV_VF(xe)) | |
| return 0; | |
| if (verify_lmem_ready(xe)) | |
| return 0; | |
| drm_dbg(&xe->drm, "Waiting for lmem initialization\n"); | |
| start = jiffies; | |
| timeout = start + secs_to_jiffies(60); /* 60 sec! */ | |
| do { | |
| if (signal_pending(current)) | |
| return -EINTR; | |
| /* | |
| * The boot firmware initializes local memory and | |
| * assesses its health. If memory training fails, | |
| * the punit will have been instructed to keep the GT powered | |
| * down.we won't be able to communicate with it | |
| * | |
| * If the status check is done before punit updates the register, | |
| * it can lead to the system being unusable. | |
| * use a timeout and defer the probe to prevent this. | |
| */ | |
| if (time_after(jiffies, timeout)) { | |
| drm_dbg(&xe->drm, "lmem not initialized by firmware\n"); | |
| return -EPROBE_DEFER; | |
| } | |
| msleep(20); | |
| } while (!verify_lmem_ready(xe)); | |
| drm_dbg(&xe->drm, "lmem ready after %ums", | |
| jiffies_to_msecs(jiffies - start)); | |
| return 0; | |
| } | |
| ALLOW_ERROR_INJECTION(wait_for_lmem_ready, ERRNO); /* See xe_pci_probe() */ | |
| static void vf_update_device_info(struct xe_device *xe) | |
| { | |
| xe_assert(xe, IS_SRIOV_VF(xe)); | |
| /* disable features that are not available/applicable to VFs */ | |
| xe->info.probe_display = 0; | |
| xe->info.has_heci_cscfi = 0; | |
| xe->info.has_heci_gscfi = 0; | |
| xe->info.has_late_bind = 0; | |
| xe->info.skip_guc_pc = 1; | |
| xe->info.skip_pcode = 1; | |
| } | |
| static int xe_device_vram_alloc(struct xe_device *xe) | |
| { | |
| struct xe_vram_region *vram; | |
| if (!IS_DGFX(xe)) | |
| return 0; | |
| vram = drmm_kzalloc(&xe->drm, sizeof(*vram), GFP_KERNEL); | |
| if (!vram) | |
| return -ENOMEM; | |
| xe->mem.vram = vram; | |
| return 0; | |
| } | |
| /** | |
| * xe_device_probe_early: Device early probe | |
| * @xe: xe device instance | |
| * | |
| * Initialize MMIO resources that don't require any | |
| * knowledge about tile count. Also initialize pcode and | |
| * check vram initialization on root tile. | |
| * | |
| * Return: 0 on success, error code on failure | |
| */ | |
| int xe_device_probe_early(struct xe_device *xe) | |
| { | |
| int err; | |
| xe_wa_device_init(xe); | |
| xe_wa_process_device_oob(xe); | |
| err = xe_mmio_probe_early(xe); | |
| if (err) | |
| return err; | |
| xe_sriov_probe_early(xe); | |
| if (IS_SRIOV_VF(xe)) | |
| vf_update_device_info(xe); | |
| err = xe_pcode_probe_early(xe); | |
| if (err || xe_survivability_mode_is_requested(xe)) { | |
| int save_err = err; | |
| /* | |
| * Try to leave device in survivability mode if device is | |
| * possible, but still return the previous error for error | |
| * propagation | |
| */ | |
| err = xe_survivability_mode_boot_enable(xe); | |
| if (err) | |
| return err; | |
| return save_err; | |
| } | |
| err = wait_for_lmem_ready(xe); | |
| if (err) | |
| return err; | |
| xe->wedged.mode = xe_modparam.wedged_mode; | |
| err = xe_device_vram_alloc(xe); | |
| if (err) | |
| return err; | |
| return 0; | |
| } | |
| ALLOW_ERROR_INJECTION(xe_device_probe_early, ERRNO); /* See xe_pci_probe() */ | |
| static int probe_has_flat_ccs(struct xe_device *xe) | |
| { | |
| struct xe_gt *gt; | |
| unsigned int fw_ref; | |
| u32 reg; | |
| /* Always enabled/disabled, no runtime check to do */ | |
| if (GRAPHICS_VER(xe) < 20 || !xe->info.has_flat_ccs || IS_SRIOV_VF(xe)) | |
| return 0; | |
| gt = xe_root_mmio_gt(xe); | |
| fw_ref = xe_force_wake_get(gt_to_fw(gt), XE_FW_GT); | |
| if (!fw_ref) | |
| return -ETIMEDOUT; | |
| reg = xe_gt_mcr_unicast_read_any(gt, XE2_FLAT_CCS_BASE_RANGE_LOWER); | |
| xe->info.has_flat_ccs = (reg & XE2_FLAT_CCS_ENABLE); | |
| if (!xe->info.has_flat_ccs) | |
| drm_dbg(&xe->drm, | |
| "Flat CCS has been disabled in bios, May lead to performance impact"); | |
| xe_force_wake_put(gt_to_fw(gt), fw_ref); | |
| return 0; | |
| } | |
| int xe_device_probe(struct xe_device *xe) | |
| { | |
| struct xe_tile *tile; | |
| struct xe_gt *gt; | |
| int err; | |
| u8 id; | |
| xe_pat_init_early(xe); | |
| err = xe_sriov_init(xe); | |
| if (err) | |
| return err; | |
| xe->info.mem_region_mask = 1; | |
| err = xe_set_dma_info(xe); | |
| if (err) | |
| return err; | |
| err = xe_mmio_probe_tiles(xe); | |
| if (err) | |
| return err; | |
| for_each_gt(gt, xe, id) { | |
| err = xe_gt_init_early(gt); | |
| if (err) | |
| return err; | |
| } | |
| for_each_tile(tile, xe, id) { | |
| err = xe_ggtt_init_early(tile->mem.ggtt); | |
| if (err) | |
| return err; | |
| } | |
| /* | |
| * From here on, if a step fails, make sure a Driver-FLR is triggereed | |
| */ | |
| err = devm_add_action_or_reset(xe->drm.dev, xe_driver_flr_fini, xe); | |
| if (err) | |
| return err; | |
| err = probe_has_flat_ccs(xe); | |
| if (err) | |
| return err; | |
| err = xe_vram_probe(xe); | |
| if (err) | |
| return err; | |
| for_each_tile(tile, xe, id) { | |
| err = xe_tile_init_noalloc(tile); | |
| if (err) | |
| return err; | |
| } | |
| /* | |
| * Allow allocations only now to ensure xe_display_init_early() | |
| * is the first to allocate, always. | |
| */ | |
| err = xe_ttm_sys_mgr_init(xe); | |
| if (err) | |
| return err; | |
| /* Allocate and map stolen after potential VRAM resize */ | |
| err = xe_ttm_stolen_mgr_init(xe); | |
| if (err) | |
| return err; | |
| /* | |
| * Now that GT is initialized (TTM in particular), | |
| * we can try to init display, and inherit the initial fb. | |
| * This is the reason the first allocation needs to be done | |
| * inside display. | |
| */ | |
| err = xe_display_init_early(xe); | |
| if (err) | |
| return err; | |
| for_each_tile(tile, xe, id) { | |
| err = xe_tile_init(tile); | |
| if (err) | |
| return err; | |
| } | |
| err = xe_irq_install(xe); | |
| if (err) | |
| return err; | |
| for_each_gt(gt, xe, id) { | |
| err = xe_gt_init(gt); | |
| if (err) | |
| return err; | |
| } | |
| if (xe->tiles->media_gt && | |
| XE_GT_WA(xe->tiles->media_gt, 15015404425_disable)) | |
| XE_DEVICE_WA_DISABLE(xe, 15015404425); | |
| err = xe_devcoredump_init(xe); | |
| if (err) | |
| return err; | |
| xe_nvm_init(xe); | |
| err = xe_heci_gsc_init(xe); | |
| if (err) | |
| return err; | |
| err = xe_late_bind_init(&xe->late_bind); | |
| if (err) | |
| return err; | |
| err = xe_oa_init(xe); | |
| if (err) | |
| return err; | |
| err = xe_display_init(xe); | |
| if (err) | |
| return err; | |
| err = xe_pxp_init(xe); | |
| if (err) | |
| return err; | |
| err = xe_psmi_init(xe); | |
| if (err) | |
| return err; | |
| err = drm_dev_register(&xe->drm, 0); | |
| if (err) | |
| return err; | |
| xe_display_register(xe); | |
| err = xe_oa_register(xe); | |
| if (err) | |
| goto err_unregister_display; | |
| err = xe_pmu_register(&xe->pmu); | |
| if (err) | |
| goto err_unregister_display; | |
| err = xe_device_sysfs_init(xe); | |
| if (err) | |
| goto err_unregister_display; | |
| xe_debugfs_register(xe); | |
| err = xe_hwmon_register(xe); | |
| if (err) | |
| goto err_unregister_display; | |
| err = xe_i2c_probe(xe); | |
| if (err) | |
| goto err_unregister_display; | |
| for_each_gt(gt, xe, id) | |
| xe_gt_sanitize_freq(gt); | |
| xe_vsec_init(xe); | |
| err = xe_sriov_init_late(xe); | |
| if (err) | |
| goto err_unregister_display; | |
| err = devm_add_action_or_reset(xe->drm.dev, xe_device_sanitize, xe); | |
| if (err) | |
| goto err_unregister_display; | |
| return 0; | |
| err_unregister_display: | |
| xe_display_unregister(xe); | |
| drm_dev_unregister(&xe->drm); | |
| return err; | |
| } | |
| void xe_device_remove(struct xe_device *xe) | |
| { | |
| xe_display_unregister(xe); | |
| drm_dev_unplug(&xe->drm); | |
| xe_bo_pci_dev_remove_all(xe); | |
| } | |
| void xe_device_shutdown(struct xe_device *xe) | |
| { | |
| struct xe_gt *gt; | |
| u8 id; | |
| drm_dbg(&xe->drm, "Shutting down device\n"); | |
| xe_display_pm_shutdown(xe); | |
| xe_irq_suspend(xe); | |
| for_each_gt(gt, xe, id) | |
| xe_gt_shutdown(gt); | |
| xe_display_pm_shutdown_late(xe); | |
| if (!xe_driver_flr_disabled(xe)) { | |
| /* BOOM! */ | |
| __xe_driver_flr(xe); | |
| } | |
| } | |
| /** | |
| * xe_device_wmb() - Device specific write memory barrier | |
| * @xe: the &xe_device | |
| * | |
| * While wmb() is sufficient for a barrier if we use system memory, on discrete | |
| * platforms with device memory we additionally need to issue a register write. | |
| * Since it doesn't matter which register we write to, use the read-only VF_CAP | |
| * register that is also marked as accessible by the VFs. | |
| */ | |
| void xe_device_wmb(struct xe_device *xe) | |
| { | |
| wmb(); | |
| if (IS_DGFX(xe)) | |
| xe_mmio_write32(xe_root_tile_mmio(xe), VF_CAP_REG, 0); | |
| } | |
| /* | |
| * Issue a TRANSIENT_FLUSH_REQUEST and wait for completion on each gt. | |
| */ | |
| static void tdf_request_sync(struct xe_device *xe) | |
| { | |
| unsigned int fw_ref; | |
| struct xe_gt *gt; | |
| u8 id; | |
| for_each_gt(gt, xe, id) { | |
| if (xe_gt_is_media_type(gt)) | |
| continue; | |
| fw_ref = xe_force_wake_get(gt_to_fw(gt), XE_FW_GT); | |
| if (!fw_ref) | |
| return; | |
| xe_mmio_write32(>->mmio, XE2_TDF_CTRL, TRANSIENT_FLUSH_REQUEST); | |
| /* | |
| * FIXME: We can likely do better here with our choice of | |
| * timeout. Currently we just assume the worst case, i.e. 150us, | |
| * which is believed to be sufficient to cover the worst case | |
| * scenario on current platforms if all cache entries are | |
| * transient and need to be flushed.. | |
| */ | |
| if (xe_mmio_wait32(>->mmio, XE2_TDF_CTRL, TRANSIENT_FLUSH_REQUEST, 0, | |
| 300, NULL, false)) | |
| xe_gt_err_once(gt, "TD flush timeout\n"); | |
| xe_force_wake_put(gt_to_fw(gt), fw_ref); | |
| } | |
| } | |
| void xe_device_l2_flush(struct xe_device *xe) | |
| { | |
| struct xe_gt *gt; | |
| unsigned int fw_ref; | |
| gt = xe_root_mmio_gt(xe); | |
| if (!XE_GT_WA(gt, 16023588340)) | |
| return; | |
| fw_ref = xe_force_wake_get(gt_to_fw(gt), XE_FW_GT); | |
| if (!fw_ref) | |
| return; | |
| spin_lock(>->global_invl_lock); | |
| xe_mmio_write32(>->mmio, XE2_GLOBAL_INVAL, 0x1); | |
| if (xe_mmio_wait32(>->mmio, XE2_GLOBAL_INVAL, 0x1, 0x0, 1000, NULL, true)) | |
| xe_gt_err_once(gt, "Global invalidation timeout\n"); | |
| spin_unlock(>->global_invl_lock); | |
| xe_force_wake_put(gt_to_fw(gt), fw_ref); | |
| } | |
| /** | |
| * xe_device_td_flush() - Flush transient L3 cache entries | |
| * @xe: The device | |
| * | |
| * Display engine has direct access to memory and is never coherent with L3/L4 | |
| * caches (or CPU caches), however KMD is responsible for specifically flushing | |
| * transient L3 GPU cache entries prior to the flip sequence to ensure scanout | |
| * can happen from such a surface without seeing corruption. | |
| * | |
| * Display surfaces can be tagged as transient by mapping it using one of the | |
| * various L3:XD PAT index modes on Xe2. | |
| * | |
| * Note: On non-discrete xe2 platforms, like LNL, the entire L3 cache is flushed | |
| * at the end of each submission via PIPE_CONTROL for compute/render, since SA | |
| * Media is not coherent with L3 and we want to support render-vs-media | |
| * usescases. For other engines like copy/blt the HW internally forces uncached | |
| * behaviour, hence why we can skip the TDF on such platforms. | |
| */ | |
| void xe_device_td_flush(struct xe_device *xe) | |
| { | |
| struct xe_gt *root_gt; | |
| if (!IS_DGFX(xe) || GRAPHICS_VER(xe) < 20) | |
| return; | |
| root_gt = xe_root_mmio_gt(xe); | |
| if (XE_GT_WA(root_gt, 16023588340)) { | |
| /* A transient flush is not sufficient: flush the L2 */ | |
| xe_device_l2_flush(xe); | |
| } else { | |
| xe_guc_pc_apply_flush_freq_limit(&root_gt->uc.guc.pc); | |
| tdf_request_sync(xe); | |
| xe_guc_pc_remove_flush_freq_limit(&root_gt->uc.guc.pc); | |
| } | |
| } | |
| u32 xe_device_ccs_bytes(struct xe_device *xe, u64 size) | |
| { | |
| return xe_device_has_flat_ccs(xe) ? | |
| DIV_ROUND_UP_ULL(size, NUM_BYTES_PER_CCS_BYTE(xe)) : 0; | |
| } | |
| /** | |
| * xe_device_assert_mem_access - Inspect the current runtime_pm state. | |
| * @xe: xe device instance | |
| * | |
| * To be used before any kind of memory access. It will splat a debug warning | |
| * if the device is currently sleeping. But it doesn't guarantee in any way | |
| * that the device is going to remain awake. Xe PM runtime get and put | |
| * functions might be added to the outer bound of the memory access, while | |
| * this check is intended for inner usage to splat some warning if the worst | |
| * case has just happened. | |
| */ | |
| void xe_device_assert_mem_access(struct xe_device *xe) | |
| { | |
| xe_assert(xe, !xe_pm_runtime_suspended(xe)); | |
| } | |
| void xe_device_snapshot_print(struct xe_device *xe, struct drm_printer *p) | |
| { | |
| struct xe_gt *gt; | |
| u8 id; | |
| drm_printf(p, "PCI ID: 0x%04x\n", xe->info.devid); | |
| drm_printf(p, "PCI revision: 0x%02x\n", xe->info.revid); | |
| for_each_gt(gt, xe, id) { | |
| drm_printf(p, "GT id: %u\n", id); | |
| drm_printf(p, "\tTile: %u\n", gt->tile->id); | |
| drm_printf(p, "\tType: %s\n", | |
| gt->info.type == XE_GT_TYPE_MAIN ? "main" : "media"); | |
| drm_printf(p, "\tIP ver: %u.%u.%u\n", | |
| REG_FIELD_GET(GMD_ID_ARCH_MASK, gt->info.gmdid), | |
| REG_FIELD_GET(GMD_ID_RELEASE_MASK, gt->info.gmdid), | |
| REG_FIELD_GET(GMD_ID_REVID, gt->info.gmdid)); | |
| drm_printf(p, "\tCS reference clock: %u\n", gt->info.reference_clock); | |
| } | |
| } | |
| u64 xe_device_canonicalize_addr(struct xe_device *xe, u64 address) | |
| { | |
| return sign_extend64(address, xe->info.va_bits - 1); | |
| } | |
| u64 xe_device_uncanonicalize_addr(struct xe_device *xe, u64 address) | |
| { | |
| return address & GENMASK_ULL(xe->info.va_bits - 1, 0); | |
| } | |
| static void xe_device_wedged_fini(struct drm_device *drm, void *arg) | |
| { | |
| struct xe_device *xe = arg; | |
| xe_pm_runtime_put(xe); | |
| } | |
| /** | |
| * DOC: Xe Device Wedging | |
| * | |
| * Xe driver uses drm device wedged uevent as documented in Documentation/gpu/drm-uapi.rst. | |
| * When device is in wedged state, every IOCTL will be blocked and GT cannot be | |
| * used. Certain critical errors like gt reset failure, firmware failures can cause | |
| * the device to be wedged. The default recovery method for a wedged state | |
| * is rebind/bus-reset. | |
| * | |
| * Another recovery method is vendor-specific. Below are the cases that send | |
| * ``WEDGED=vendor-specific`` recovery method in drm device wedged uevent. | |
| * | |
| * Case: Firmware Flash | |
| * -------------------- | |
| * | |
| * Identification Hint | |
| * +++++++++++++++++++ | |
| * | |
| * ``WEDGED=vendor-specific`` drm device wedged uevent with | |
| * :ref:`Runtime Survivability mode <xe-survivability-mode>` is used to notify | |
| * admin/userspace consumer about the need for a firmware flash. | |
| * | |
| * Recovery Procedure | |
| * ++++++++++++++++++ | |
| * | |
| * Once ``WEDGED=vendor-specific`` drm device wedged uevent is received, follow | |
| * the below steps | |
| * | |
| * - Check Runtime Survivability mode sysfs. | |
| * If enabled, firmware flash is required to recover the device. | |
| * | |
| * /sys/bus/pci/devices/<device>/survivability_mode | |
| * | |
| * - Admin/userpsace consumer can use firmware flashing tools like fwupd to flash | |
| * firmware and restore device to normal operation. | |
| */ | |
| /** | |
| * xe_device_set_wedged_method - Set wedged recovery method | |
| * @xe: xe device instance | |
| * @method: recovery method to set | |
| * | |
| * Set wedged recovery method to be sent in drm wedged uevent. | |
| */ | |
| void xe_device_set_wedged_method(struct xe_device *xe, unsigned long method) | |
| { | |
| xe->wedged.method = method; | |
| } | |
| /** | |
| * xe_device_declare_wedged - Declare device wedged | |
| * @xe: xe device instance | |
| * | |
| * This is a final state that can only be cleared with the recovery method | |
| * specified in the drm wedged uevent. The method can be set using | |
| * xe_device_set_wedged_method before declaring the device as wedged. If no method | |
| * is set, reprobe (unbind/re-bind) will be sent by default. | |
| * | |
| * In this state every IOCTL will be blocked so the GT cannot be used. | |
| * In general it will be called upon any critical error such as gt reset | |
| * failure or guc loading failure. Userspace will be notified of this state | |
| * through device wedged uevent. | |
| * If xe.wedged module parameter is set to 2, this function will be called | |
| * on every single execution timeout (a.k.a. GPU hang) right after devcoredump | |
| * snapshot capture. In this mode, GT reset won't be attempted so the state of | |
| * the issue is preserved for further debugging. | |
| */ | |
| void xe_device_declare_wedged(struct xe_device *xe) | |
| { | |
| struct xe_gt *gt; | |
| u8 id; | |
| if (xe->wedged.mode == 0) { | |
| drm_dbg(&xe->drm, "Wedged mode is forcibly disabled\n"); | |
| return; | |
| } | |
| xe_pm_runtime_get_noresume(xe); | |
| if (drmm_add_action_or_reset(&xe->drm, xe_device_wedged_fini, xe)) { | |
| drm_err(&xe->drm, "Failed to register xe_device_wedged_fini clean-up. Although device is wedged.\n"); | |
| return; | |
| } | |
| if (!atomic_xchg(&xe->wedged.flag, 1)) { | |
| xe->needs_flr_on_fini = true; | |
| drm_err(&xe->drm, | |
| "CRITICAL: Xe has declared device %s as wedged.\n" | |
| "IOCTLs and executions are blocked. Only a rebind may clear the failure\n" | |
| "Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/xe/kernel/issues/new\n", | |
| dev_name(xe->drm.dev)); | |
| } | |
| for_each_gt(gt, xe, id) | |
| xe_gt_declare_wedged(gt); | |
| if (xe_device_wedged(xe)) { | |
| /* If no wedge recovery method is set, use default */ | |
| if (!xe->wedged.method) | |
| xe_device_set_wedged_method(xe, DRM_WEDGE_RECOVERY_REBIND | | |
| DRM_WEDGE_RECOVERY_BUS_RESET); | |
| /* Notify userspace of wedged device */ | |
| drm_dev_wedged_event(&xe->drm, xe->wedged.method, NULL); | |
| } | |
| } |