| // SPDX-License-Identifier: GPL-2.0-only | |
| #include <linux/slab.h> | |
| #include <linux/stat.h> | |
| #include <linux/sched/xacct.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/file.h> | |
| #include <linux/uio.h> | |
| #include <linux/fsnotify.h> | |
| #include <linux/security.h> | |
| #include <linux/export.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/splice.h> | |
| #include <linux/compat.h> | |
| #include <linux/mount.h> | |
| #include <linux/fs.h> | |
| #include <linux/dax.h> | |
| #include <linux/overflow.h> | |
| #include "internal.h" | |
| #include <linux/uaccess.h> | |
| #include <asm/unistd.h> | |
| /* | |
| * Performs necessary checks before doing a clone. | |
| * | |
| * Can adjust amount of bytes to clone via @req_count argument. | |
| * Returns appropriate error code that caller should return or | |
| * zero in case the clone should be allowed. | |
| */ | |
| static int generic_remap_checks(struct file *file_in, loff_t pos_in, | |
| struct file *file_out, loff_t pos_out, | |
| loff_t *req_count, unsigned int remap_flags) | |
| { | |
| struct inode *inode_in = file_in->f_mapping->host; | |
| struct inode *inode_out = file_out->f_mapping->host; | |
| uint64_t count = *req_count; | |
| uint64_t bcount; | |
| loff_t size_in, size_out; | |
| loff_t bs = inode_out->i_sb->s_blocksize; | |
| int ret; | |
| /* The start of both ranges must be aligned to an fs block. */ | |
| if (!IS_ALIGNED(pos_in, bs) || !IS_ALIGNED(pos_out, bs)) | |
| return -EINVAL; | |
| /* Ensure offsets don't wrap. */ | |
| if (pos_in + count < pos_in || pos_out + count < pos_out) | |
| return -EINVAL; | |
| size_in = i_size_read(inode_in); | |
| size_out = i_size_read(inode_out); | |
| /* Dedupe requires both ranges to be within EOF. */ | |
| if ((remap_flags & REMAP_FILE_DEDUP) && | |
| (pos_in >= size_in || pos_in + count > size_in || | |
| pos_out >= size_out || pos_out + count > size_out)) | |
| return -EINVAL; | |
| /* Ensure the infile range is within the infile. */ | |
| if (pos_in >= size_in) | |
| return -EINVAL; | |
| count = min(count, size_in - (uint64_t)pos_in); | |
| ret = generic_write_check_limits(file_out, pos_out, &count); | |
| if (ret) | |
| return ret; | |
| /* | |
| * If the user wanted us to link to the infile's EOF, round up to the | |
| * next block boundary for this check. | |
| * | |
| * Otherwise, make sure the count is also block-aligned, having | |
| * already confirmed the starting offsets' block alignment. | |
| */ | |
| if (pos_in + count == size_in && | |
| (!(remap_flags & REMAP_FILE_DEDUP) || pos_out + count == size_out)) { | |
| bcount = ALIGN(size_in, bs) - pos_in; | |
| } else { | |
| if (!IS_ALIGNED(count, bs)) | |
| count = ALIGN_DOWN(count, bs); | |
| bcount = count; | |
| } | |
| /* Don't allow overlapped cloning within the same file. */ | |
| if (inode_in == inode_out && | |
| pos_out + bcount > pos_in && | |
| pos_out < pos_in + bcount) | |
| return -EINVAL; | |
| /* | |
| * We shortened the request but the caller can't deal with that, so | |
| * bounce the request back to userspace. | |
| */ | |
| if (*req_count != count && !(remap_flags & REMAP_FILE_CAN_SHORTEN)) | |
| return -EINVAL; | |
| *req_count = count; | |
| return 0; | |
| } | |
| int remap_verify_area(struct file *file, loff_t pos, loff_t len, bool write) | |
| { | |
| int mask = write ? MAY_WRITE : MAY_READ; | |
| loff_t tmp; | |
| int ret; | |
| if (unlikely(pos < 0 || len < 0)) | |
| return -EINVAL; | |
| if (unlikely(check_add_overflow(pos, len, &tmp))) | |
| return -EINVAL; | |
| ret = security_file_permission(file, mask); | |
| if (ret) | |
| return ret; | |
| return fsnotify_file_area_perm(file, mask, &pos, len); | |
| } | |
| EXPORT_SYMBOL_GPL(remap_verify_area); | |
| /* | |
| * Ensure that we don't remap a partial EOF block in the middle of something | |
| * else. Assume that the offsets have already been checked for block | |
| * alignment. | |
| * | |
| * For clone we only link a partial EOF block above or at the destination file's | |
| * EOF. For deduplication we accept a partial EOF block only if it ends at the | |
| * destination file's EOF (can not link it into the middle of a file). | |
| * | |
| * Shorten the request if possible. | |
| */ | |
| static int generic_remap_check_len(struct inode *inode_in, | |
| struct inode *inode_out, | |
| loff_t pos_out, | |
| loff_t *len, | |
| unsigned int remap_flags) | |
| { | |
| u64 blkmask = i_blocksize(inode_in) - 1; | |
| loff_t new_len = *len; | |
| if ((*len & blkmask) == 0) | |
| return 0; | |
| if (pos_out + *len < i_size_read(inode_out)) | |
| new_len &= ~blkmask; | |
| if (new_len == *len) | |
| return 0; | |
| if (remap_flags & REMAP_FILE_CAN_SHORTEN) { | |
| *len = new_len; | |
| return 0; | |
| } | |
| return (remap_flags & REMAP_FILE_DEDUP) ? -EBADE : -EINVAL; | |
| } | |
| /* Read a page's worth of file data into the page cache. */ | |
| static struct folio *vfs_dedupe_get_folio(struct file *file, loff_t pos) | |
| { | |
| return read_mapping_folio(file->f_mapping, pos >> PAGE_SHIFT, file); | |
| } | |
| /* | |
| * Lock two folios, ensuring that we lock in offset order if the folios | |
| * are from the same file. | |
| */ | |
| static void vfs_lock_two_folios(struct folio *folio1, struct folio *folio2) | |
| { | |
| /* Always lock in order of increasing index. */ | |
| if (folio1->index > folio2->index) | |
| swap(folio1, folio2); | |
| folio_lock(folio1); | |
| if (folio1 != folio2) | |
| folio_lock(folio2); | |
| } | |
| /* Unlock two folios, being careful not to unlock the same folio twice. */ | |
| static void vfs_unlock_two_folios(struct folio *folio1, struct folio *folio2) | |
| { | |
| folio_unlock(folio1); | |
| if (folio1 != folio2) | |
| folio_unlock(folio2); | |
| } | |
| /* | |
| * Compare extents of two files to see if they are the same. | |
| * Caller must have locked both inodes to prevent write races. | |
| */ | |
| static int vfs_dedupe_file_range_compare(struct file *src, loff_t srcoff, | |
| struct file *dest, loff_t dstoff, | |
| loff_t len, bool *is_same) | |
| { | |
| bool same = true; | |
| int error = -EINVAL; | |
| while (len) { | |
| struct folio *src_folio, *dst_folio; | |
| void *src_addr, *dst_addr; | |
| loff_t cmp_len = min(PAGE_SIZE - offset_in_page(srcoff), | |
| PAGE_SIZE - offset_in_page(dstoff)); | |
| cmp_len = min(cmp_len, len); | |
| if (cmp_len <= 0) | |
| goto out_error; | |
| src_folio = vfs_dedupe_get_folio(src, srcoff); | |
| if (IS_ERR(src_folio)) { | |
| error = PTR_ERR(src_folio); | |
| goto out_error; | |
| } | |
| dst_folio = vfs_dedupe_get_folio(dest, dstoff); | |
| if (IS_ERR(dst_folio)) { | |
| error = PTR_ERR(dst_folio); | |
| folio_put(src_folio); | |
| goto out_error; | |
| } | |
| vfs_lock_two_folios(src_folio, dst_folio); | |
| /* | |
| * Now that we've locked both folios, make sure they're still | |
| * mapped to the file data we're interested in. If not, | |
| * someone is invalidating pages on us and we lose. | |
| */ | |
| if (!folio_test_uptodate(src_folio) || !folio_test_uptodate(dst_folio) || | |
| src_folio->mapping != src->f_mapping || | |
| dst_folio->mapping != dest->f_mapping) { | |
| same = false; | |
| goto unlock; | |
| } | |
| src_addr = kmap_local_folio(src_folio, | |
| offset_in_folio(src_folio, srcoff)); | |
| dst_addr = kmap_local_folio(dst_folio, | |
| offset_in_folio(dst_folio, dstoff)); | |
| flush_dcache_folio(src_folio); | |
| flush_dcache_folio(dst_folio); | |
| if (memcmp(src_addr, dst_addr, cmp_len)) | |
| same = false; | |
| kunmap_local(dst_addr); | |
| kunmap_local(src_addr); | |
| unlock: | |
| vfs_unlock_two_folios(src_folio, dst_folio); | |
| folio_put(dst_folio); | |
| folio_put(src_folio); | |
| if (!same) | |
| break; | |
| srcoff += cmp_len; | |
| dstoff += cmp_len; | |
| len -= cmp_len; | |
| } | |
| *is_same = same; | |
| return 0; | |
| out_error: | |
| return error; | |
| } | |
| /* | |
| * Check that the two inodes are eligible for cloning, the ranges make | |
| * sense, and then flush all dirty data. Caller must ensure that the | |
| * inodes have been locked against any other modifications. | |
| * | |
| * If there's an error, then the usual negative error code is returned. | |
| * Otherwise returns 0 with *len set to the request length. | |
| */ | |
| int | |
| __generic_remap_file_range_prep(struct file *file_in, loff_t pos_in, | |
| struct file *file_out, loff_t pos_out, | |
| loff_t *len, unsigned int remap_flags, | |
| const struct iomap_ops *dax_read_ops) | |
| { | |
| struct inode *inode_in = file_inode(file_in); | |
| struct inode *inode_out = file_inode(file_out); | |
| bool same_inode = (inode_in == inode_out); | |
| int ret; | |
| /* Don't touch certain kinds of inodes */ | |
| if (IS_IMMUTABLE(inode_out)) | |
| return -EPERM; | |
| if (IS_SWAPFILE(inode_in) || IS_SWAPFILE(inode_out)) | |
| return -ETXTBSY; | |
| /* Don't reflink dirs, pipes, sockets... */ | |
| if (S_ISDIR(inode_in->i_mode) || S_ISDIR(inode_out->i_mode)) | |
| return -EISDIR; | |
| if (!S_ISREG(inode_in->i_mode) || !S_ISREG(inode_out->i_mode)) | |
| return -EINVAL; | |
| /* Zero length dedupe exits immediately; reflink goes to EOF. */ | |
| if (*len == 0) { | |
| loff_t isize = i_size_read(inode_in); | |
| if ((remap_flags & REMAP_FILE_DEDUP) || pos_in == isize) | |
| return 0; | |
| if (pos_in > isize) | |
| return -EINVAL; | |
| *len = isize - pos_in; | |
| if (*len == 0) | |
| return 0; | |
| } | |
| /* Check that we don't violate system file offset limits. */ | |
| ret = generic_remap_checks(file_in, pos_in, file_out, pos_out, len, | |
| remap_flags); | |
| if (ret || *len == 0) | |
| return ret; | |
| /* Wait for the completion of any pending IOs on both files */ | |
| inode_dio_wait(inode_in); | |
| if (!same_inode) | |
| inode_dio_wait(inode_out); | |
| ret = filemap_write_and_wait_range(inode_in->i_mapping, | |
| pos_in, pos_in + *len - 1); | |
| if (ret) | |
| return ret; | |
| ret = filemap_write_and_wait_range(inode_out->i_mapping, | |
| pos_out, pos_out + *len - 1); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Check that the extents are the same. | |
| */ | |
| if (remap_flags & REMAP_FILE_DEDUP) { | |
| bool is_same = false; | |
| if (!IS_DAX(inode_in)) | |
| ret = vfs_dedupe_file_range_compare(file_in, pos_in, | |
| file_out, pos_out, *len, &is_same); | |
| else if (dax_read_ops) | |
| ret = dax_dedupe_file_range_compare(inode_in, pos_in, | |
| inode_out, pos_out, *len, &is_same, | |
| dax_read_ops); | |
| else | |
| return -EINVAL; | |
| if (ret) | |
| return ret; | |
| if (!is_same) | |
| return -EBADE; | |
| } | |
| ret = generic_remap_check_len(inode_in, inode_out, pos_out, len, | |
| remap_flags); | |
| if (ret || *len == 0) | |
| return ret; | |
| /* If can't alter the file contents, we're done. */ | |
| if (!(remap_flags & REMAP_FILE_DEDUP)) | |
| ret = file_modified(file_out); | |
| return ret; | |
| } | |
| int generic_remap_file_range_prep(struct file *file_in, loff_t pos_in, | |
| struct file *file_out, loff_t pos_out, | |
| loff_t *len, unsigned int remap_flags) | |
| { | |
| return __generic_remap_file_range_prep(file_in, pos_in, file_out, | |
| pos_out, len, remap_flags, NULL); | |
| } | |
| EXPORT_SYMBOL(generic_remap_file_range_prep); | |
| loff_t vfs_clone_file_range(struct file *file_in, loff_t pos_in, | |
| struct file *file_out, loff_t pos_out, | |
| loff_t len, unsigned int remap_flags) | |
| { | |
| loff_t ret; | |
| WARN_ON_ONCE(remap_flags & REMAP_FILE_DEDUP); | |
| if (file_inode(file_in)->i_sb != file_inode(file_out)->i_sb) | |
| return -EXDEV; | |
| ret = generic_file_rw_checks(file_in, file_out); | |
| if (ret < 0) | |
| return ret; | |
| if (!file_in->f_op->remap_file_range) | |
| return -EOPNOTSUPP; | |
| ret = remap_verify_area(file_in, pos_in, len, false); | |
| if (ret) | |
| return ret; | |
| ret = remap_verify_area(file_out, pos_out, len, true); | |
| if (ret) | |
| return ret; | |
| file_start_write(file_out); | |
| ret = file_in->f_op->remap_file_range(file_in, pos_in, | |
| file_out, pos_out, len, remap_flags); | |
| file_end_write(file_out); | |
| if (ret < 0) | |
| return ret; | |
| fsnotify_access(file_in); | |
| fsnotify_modify(file_out); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(vfs_clone_file_range); | |
| /* Check whether we are allowed to dedupe the destination file */ | |
| static bool may_dedupe_file(struct file *file) | |
| { | |
| struct mnt_idmap *idmap = file_mnt_idmap(file); | |
| struct inode *inode = file_inode(file); | |
| if (capable(CAP_SYS_ADMIN)) | |
| return true; | |
| if (file->f_mode & FMODE_WRITE) | |
| return true; | |
| if (vfsuid_eq_kuid(i_uid_into_vfsuid(idmap, inode), current_fsuid())) | |
| return true; | |
| if (!inode_permission(idmap, inode, MAY_WRITE)) | |
| return true; | |
| return false; | |
| } | |
| loff_t vfs_dedupe_file_range_one(struct file *src_file, loff_t src_pos, | |
| struct file *dst_file, loff_t dst_pos, | |
| loff_t len, unsigned int remap_flags) | |
| { | |
| loff_t ret; | |
| WARN_ON_ONCE(remap_flags & ~(REMAP_FILE_DEDUP | | |
| REMAP_FILE_CAN_SHORTEN)); | |
| /* | |
| * This is redundant if called from vfs_dedupe_file_range(), but other | |
| * callers need it and it's not performance sesitive... | |
| */ | |
| ret = remap_verify_area(src_file, src_pos, len, false); | |
| if (ret) | |
| return ret; | |
| ret = remap_verify_area(dst_file, dst_pos, len, true); | |
| if (ret) | |
| return ret; | |
| /* | |
| * This needs to be called after remap_verify_area() because of | |
| * sb_start_write() and before may_dedupe_file() because the mount's | |
| * MAY_WRITE need to be checked with mnt_get_write_access_file() held. | |
| */ | |
| ret = mnt_want_write_file(dst_file); | |
| if (ret) | |
| return ret; | |
| ret = -EPERM; | |
| if (!may_dedupe_file(dst_file)) | |
| goto out_drop_write; | |
| ret = -EXDEV; | |
| if (file_inode(src_file)->i_sb != file_inode(dst_file)->i_sb) | |
| goto out_drop_write; | |
| ret = -EISDIR; | |
| if (S_ISDIR(file_inode(dst_file)->i_mode)) | |
| goto out_drop_write; | |
| ret = -EINVAL; | |
| if (!dst_file->f_op->remap_file_range) | |
| goto out_drop_write; | |
| if (len == 0) { | |
| ret = 0; | |
| goto out_drop_write; | |
| } | |
| ret = dst_file->f_op->remap_file_range(src_file, src_pos, dst_file, | |
| dst_pos, len, remap_flags | REMAP_FILE_DEDUP); | |
| out_drop_write: | |
| mnt_drop_write_file(dst_file); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(vfs_dedupe_file_range_one); | |
| int vfs_dedupe_file_range(struct file *file, struct file_dedupe_range *same) | |
| { | |
| struct file_dedupe_range_info *info; | |
| struct inode *src = file_inode(file); | |
| u64 off; | |
| u64 len; | |
| int i; | |
| int ret; | |
| u16 count = same->dest_count; | |
| loff_t deduped; | |
| if (!(file->f_mode & FMODE_READ)) | |
| return -EINVAL; | |
| if (same->reserved1 || same->reserved2) | |
| return -EINVAL; | |
| off = same->src_offset; | |
| len = same->src_length; | |
| if (S_ISDIR(src->i_mode)) | |
| return -EISDIR; | |
| if (!S_ISREG(src->i_mode)) | |
| return -EINVAL; | |
| if (!file->f_op->remap_file_range) | |
| return -EOPNOTSUPP; | |
| ret = remap_verify_area(file, off, len, false); | |
| if (ret < 0) | |
| return ret; | |
| ret = 0; | |
| if (off + len > i_size_read(src)) | |
| return -EINVAL; | |
| /* Arbitrary 1G limit on a single dedupe request, can be raised. */ | |
| len = min_t(u64, len, 1 << 30); | |
| /* pre-format output fields to sane values */ | |
| for (i = 0; i < count; i++) { | |
| same->info[i].bytes_deduped = 0ULL; | |
| same->info[i].status = FILE_DEDUPE_RANGE_SAME; | |
| } | |
| for (i = 0, info = same->info; i < count; i++, info++) { | |
| struct fd dst_fd = fdget(info->dest_fd); | |
| struct file *dst_file = fd_file(dst_fd); | |
| if (!dst_file) { | |
| info->status = -EBADF; | |
| goto next_loop; | |
| } | |
| if (info->reserved) { | |
| info->status = -EINVAL; | |
| goto next_fdput; | |
| } | |
| deduped = vfs_dedupe_file_range_one(file, off, dst_file, | |
| info->dest_offset, len, | |
| REMAP_FILE_CAN_SHORTEN); | |
| if (deduped == -EBADE) | |
| info->status = FILE_DEDUPE_RANGE_DIFFERS; | |
| else if (deduped < 0) | |
| info->status = deduped; | |
| else | |
| info->bytes_deduped = len; | |
| next_fdput: | |
| fdput(dst_fd); | |
| next_loop: | |
| if (fatal_signal_pending(current)) | |
| break; | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(vfs_dedupe_file_range); |