| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * High-level sync()-related operations | |
| */ | |
| #include <linux/blkdev.h> | |
| #include <linux/kernel.h> | |
| #include <linux/file.h> | |
| #include <linux/fs.h> | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <linux/namei.h> | |
| #include <linux/sched.h> | |
| #include <linux/writeback.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/linkage.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/quotaops.h> | |
| #include <linux/backing-dev.h> | |
| #include "internal.h" | |
| #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \ | |
| SYNC_FILE_RANGE_WAIT_AFTER) | |
| /* | |
| * Write out and wait upon all dirty data associated with this | |
| * superblock. Filesystem data as well as the underlying block | |
| * device. Takes the superblock lock. | |
| */ | |
| int sync_filesystem(struct super_block *sb) | |
| { | |
| int ret = 0; | |
| /* | |
| * We need to be protected against the filesystem going from | |
| * r/o to r/w or vice versa. | |
| */ | |
| WARN_ON(!rwsem_is_locked(&sb->s_umount)); | |
| /* | |
| * No point in syncing out anything if the filesystem is read-only. | |
| */ | |
| if (sb_rdonly(sb)) | |
| return 0; | |
| /* | |
| * Do the filesystem syncing work. For simple filesystems | |
| * writeback_inodes_sb(sb) just dirties buffers with inodes so we have | |
| * to submit I/O for these buffers via sync_blockdev(). This also | |
| * speeds up the wait == 1 case since in that case write_inode() | |
| * methods call sync_dirty_buffer() and thus effectively write one block | |
| * at a time. | |
| */ | |
| writeback_inodes_sb(sb, WB_REASON_SYNC); | |
| if (sb->s_op->sync_fs) { | |
| ret = sb->s_op->sync_fs(sb, 0); | |
| if (ret) | |
| return ret; | |
| } | |
| ret = sync_blockdev_nowait(sb->s_bdev); | |
| if (ret) | |
| return ret; | |
| sync_inodes_sb(sb); | |
| if (sb->s_op->sync_fs) { | |
| ret = sb->s_op->sync_fs(sb, 1); | |
| if (ret) | |
| return ret; | |
| } | |
| return sync_blockdev(sb->s_bdev); | |
| } | |
| EXPORT_SYMBOL(sync_filesystem); | |
| static void sync_inodes_one_sb(struct super_block *sb, void *arg) | |
| { | |
| if (!sb_rdonly(sb)) | |
| sync_inodes_sb(sb); | |
| } | |
| static void sync_fs_one_sb(struct super_block *sb, void *arg) | |
| { | |
| if (!sb_rdonly(sb) && !(sb->s_iflags & SB_I_SKIP_SYNC) && | |
| sb->s_op->sync_fs) | |
| sb->s_op->sync_fs(sb, *(int *)arg); | |
| } | |
| /* | |
| * Sync everything. We start by waking flusher threads so that most of | |
| * writeback runs on all devices in parallel. Then we sync all inodes reliably | |
| * which effectively also waits for all flusher threads to finish doing | |
| * writeback. At this point all data is on disk so metadata should be stable | |
| * and we tell filesystems to sync their metadata via ->sync_fs() calls. | |
| * Finally, we writeout all block devices because some filesystems (e.g. ext2) | |
| * just write metadata (such as inodes or bitmaps) to block device page cache | |
| * and do not sync it on their own in ->sync_fs(). | |
| */ | |
| void ksys_sync(void) | |
| { | |
| int nowait = 0, wait = 1; | |
| wakeup_flusher_threads(WB_REASON_SYNC); | |
| iterate_supers(sync_inodes_one_sb, NULL); | |
| iterate_supers(sync_fs_one_sb, &nowait); | |
| iterate_supers(sync_fs_one_sb, &wait); | |
| sync_bdevs(false); | |
| sync_bdevs(true); | |
| if (unlikely(laptop_mode)) | |
| laptop_sync_completion(); | |
| } | |
| SYSCALL_DEFINE0(sync) | |
| { | |
| ksys_sync(); | |
| return 0; | |
| } | |
| static void do_sync_work(struct work_struct *work) | |
| { | |
| int nowait = 0; | |
| /* | |
| * Sync twice to reduce the possibility we skipped some inodes / pages | |
| * because they were temporarily locked | |
| */ | |
| iterate_supers(sync_inodes_one_sb, &nowait); | |
| iterate_supers(sync_fs_one_sb, &nowait); | |
| sync_bdevs(false); | |
| iterate_supers(sync_inodes_one_sb, &nowait); | |
| iterate_supers(sync_fs_one_sb, &nowait); | |
| sync_bdevs(false); | |
| printk("Emergency Sync complete\n"); | |
| kfree(work); | |
| } | |
| void emergency_sync(void) | |
| { | |
| struct work_struct *work; | |
| work = kmalloc(sizeof(*work), GFP_ATOMIC); | |
| if (work) { | |
| INIT_WORK(work, do_sync_work); | |
| schedule_work(work); | |
| } | |
| } | |
| /* | |
| * sync a single super | |
| */ | |
| SYSCALL_DEFINE1(syncfs, int, fd) | |
| { | |
| struct fd f = fdget(fd); | |
| struct super_block *sb; | |
| int ret, ret2; | |
| if (!fd_file(f)) | |
| return -EBADF; | |
| sb = fd_file(f)->f_path.dentry->d_sb; | |
| down_read(&sb->s_umount); | |
| ret = sync_filesystem(sb); | |
| up_read(&sb->s_umount); | |
| ret2 = errseq_check_and_advance(&sb->s_wb_err, &fd_file(f)->f_sb_err); | |
| fdput(f); | |
| return ret ? ret : ret2; | |
| } | |
| /** | |
| * vfs_fsync_range - helper to sync a range of data & metadata to disk | |
| * @file: file to sync | |
| * @start: offset in bytes of the beginning of data range to sync | |
| * @end: offset in bytes of the end of data range (inclusive) | |
| * @datasync: perform only datasync | |
| * | |
| * Write back data in range @start..@end and metadata for @file to disk. If | |
| * @datasync is set only metadata needed to access modified file data is | |
| * written. | |
| */ | |
| int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync) | |
| { | |
| struct inode *inode = file->f_mapping->host; | |
| if (!file->f_op->fsync) | |
| return -EINVAL; | |
| if (!datasync && (inode->i_state & I_DIRTY_TIME)) | |
| mark_inode_dirty_sync(inode); | |
| return file->f_op->fsync(file, start, end, datasync); | |
| } | |
| EXPORT_SYMBOL(vfs_fsync_range); | |
| /** | |
| * vfs_fsync - perform a fsync or fdatasync on a file | |
| * @file: file to sync | |
| * @datasync: only perform a fdatasync operation | |
| * | |
| * Write back data and metadata for @file to disk. If @datasync is | |
| * set only metadata needed to access modified file data is written. | |
| */ | |
| int vfs_fsync(struct file *file, int datasync) | |
| { | |
| return vfs_fsync_range(file, 0, LLONG_MAX, datasync); | |
| } | |
| EXPORT_SYMBOL(vfs_fsync); | |
| static int do_fsync(unsigned int fd, int datasync) | |
| { | |
| struct fd f = fdget(fd); | |
| int ret = -EBADF; | |
| if (fd_file(f)) { | |
| ret = vfs_fsync(fd_file(f), datasync); | |
| fdput(f); | |
| } | |
| return ret; | |
| } | |
| SYSCALL_DEFINE1(fsync, unsigned int, fd) | |
| { | |
| return do_fsync(fd, 0); | |
| } | |
| SYSCALL_DEFINE1(fdatasync, unsigned int, fd) | |
| { | |
| return do_fsync(fd, 1); | |
| } | |
| int sync_file_range(struct file *file, loff_t offset, loff_t nbytes, | |
| unsigned int flags) | |
| { | |
| int ret; | |
| struct address_space *mapping; | |
| loff_t endbyte; /* inclusive */ | |
| umode_t i_mode; | |
| ret = -EINVAL; | |
| if (flags & ~VALID_FLAGS) | |
| goto out; | |
| endbyte = offset + nbytes; | |
| if ((s64)offset < 0) | |
| goto out; | |
| if ((s64)endbyte < 0) | |
| goto out; | |
| if (endbyte < offset) | |
| goto out; | |
| if (sizeof(pgoff_t) == 4) { | |
| if (offset >= (0x100000000ULL << PAGE_SHIFT)) { | |
| /* | |
| * The range starts outside a 32 bit machine's | |
| * pagecache addressing capabilities. Let it "succeed" | |
| */ | |
| ret = 0; | |
| goto out; | |
| } | |
| if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) { | |
| /* | |
| * Out to EOF | |
| */ | |
| nbytes = 0; | |
| } | |
| } | |
| if (nbytes == 0) | |
| endbyte = LLONG_MAX; | |
| else | |
| endbyte--; /* inclusive */ | |
| i_mode = file_inode(file)->i_mode; | |
| ret = -ESPIPE; | |
| if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) && | |
| !S_ISLNK(i_mode)) | |
| goto out; | |
| mapping = file->f_mapping; | |
| ret = 0; | |
| if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) { | |
| ret = file_fdatawait_range(file, offset, endbyte); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| if (flags & SYNC_FILE_RANGE_WRITE) { | |
| int sync_mode = WB_SYNC_NONE; | |
| if ((flags & SYNC_FILE_RANGE_WRITE_AND_WAIT) == | |
| SYNC_FILE_RANGE_WRITE_AND_WAIT) | |
| sync_mode = WB_SYNC_ALL; | |
| ret = __filemap_fdatawrite_range(mapping, offset, endbyte, | |
| sync_mode); | |
| if (ret < 0) | |
| goto out; | |
| } | |
| if (flags & SYNC_FILE_RANGE_WAIT_AFTER) | |
| ret = file_fdatawait_range(file, offset, endbyte); | |
| out: | |
| return ret; | |
| } | |
| /* | |
| * ksys_sync_file_range() permits finely controlled syncing over a segment of | |
| * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is | |
| * zero then ksys_sync_file_range() will operate from offset out to EOF. | |
| * | |
| * The flag bits are: | |
| * | |
| * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range | |
| * before performing the write. | |
| * | |
| * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the | |
| * range which are not presently under writeback. Note that this may block for | |
| * significant periods due to exhaustion of disk request structures. | |
| * | |
| * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range | |
| * after performing the write. | |
| * | |
| * Useful combinations of the flag bits are: | |
| * | |
| * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages | |
| * in the range which were dirty on entry to ksys_sync_file_range() are placed | |
| * under writeout. This is a start-write-for-data-integrity operation. | |
| * | |
| * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which | |
| * are not presently under writeout. This is an asynchronous flush-to-disk | |
| * operation. Not suitable for data integrity operations. | |
| * | |
| * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for | |
| * completion of writeout of all pages in the range. This will be used after an | |
| * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait | |
| * for that operation to complete and to return the result. | |
| * | |
| * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER | |
| * (a.k.a. SYNC_FILE_RANGE_WRITE_AND_WAIT): | |
| * a traditional sync() operation. This is a write-for-data-integrity operation | |
| * which will ensure that all pages in the range which were dirty on entry to | |
| * ksys_sync_file_range() are written to disk. It should be noted that disk | |
| * caches are not flushed by this call, so there are no guarantees here that the | |
| * data will be available on disk after a crash. | |
| * | |
| * | |
| * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any | |
| * I/O errors or ENOSPC conditions and will return those to the caller, after | |
| * clearing the EIO and ENOSPC flags in the address_space. | |
| * | |
| * It should be noted that none of these operations write out the file's | |
| * metadata. So unless the application is strictly performing overwrites of | |
| * already-instantiated disk blocks, there are no guarantees here that the data | |
| * will be available after a crash. | |
| */ | |
| int ksys_sync_file_range(int fd, loff_t offset, loff_t nbytes, | |
| unsigned int flags) | |
| { | |
| int ret; | |
| struct fd f; | |
| ret = -EBADF; | |
| f = fdget(fd); | |
| if (fd_file(f)) | |
| ret = sync_file_range(fd_file(f), offset, nbytes, flags); | |
| fdput(f); | |
| return ret; | |
| } | |
| SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes, | |
| unsigned int, flags) | |
| { | |
| return ksys_sync_file_range(fd, offset, nbytes, flags); | |
| } | |
| #if defined(CONFIG_COMPAT) && defined(__ARCH_WANT_COMPAT_SYNC_FILE_RANGE) | |
| COMPAT_SYSCALL_DEFINE6(sync_file_range, int, fd, compat_arg_u64_dual(offset), | |
| compat_arg_u64_dual(nbytes), unsigned int, flags) | |
| { | |
| return ksys_sync_file_range(fd, compat_arg_u64_glue(offset), | |
| compat_arg_u64_glue(nbytes), flags); | |
| } | |
| #endif | |
| /* It would be nice if people remember that not all the world's an i386 | |
| when they introduce new system calls */ | |
| SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags, | |
| loff_t, offset, loff_t, nbytes) | |
| { | |
| return ksys_sync_file_range(fd, offset, nbytes, flags); | |
| } |