| /* SPDX-License-Identifier: GPL-2.0-or-later */ | 
 | /* | 
 |  *  iSCSI Transport BSG Interface | 
 |  * | 
 |  *  Copyright (C) 2009   James Smart, Emulex Corporation | 
 |  */ | 
 |  | 
 | #ifndef SCSI_BSG_ISCSI_H | 
 | #define SCSI_BSG_ISCSI_H | 
 |  | 
 | /* | 
 |  * This file intended to be included by both kernel and user space | 
 |  */ | 
 |  | 
 | #include <scsi/scsi.h> | 
 |  | 
 | /* | 
 |  * iSCSI Transport SGIO v4 BSG Message Support | 
 |  */ | 
 |  | 
 | /* Default BSG request timeout (in seconds) */ | 
 | #define ISCSI_DEFAULT_BSG_TIMEOUT      (10 * HZ) | 
 |  | 
 |  | 
 | /* | 
 |  * Request Message Codes supported by the iSCSI Transport | 
 |  */ | 
 |  | 
 | /* define the class masks for the message codes */ | 
 | #define ISCSI_BSG_CLS_MASK     0xF0000000      /* find object class */ | 
 | #define ISCSI_BSG_HST_MASK     0x80000000      /* iscsi host class */ | 
 |  | 
 | /* iscsi host Message Codes */ | 
 | #define ISCSI_BSG_HST_VENDOR           (ISCSI_BSG_HST_MASK | 0x000000FF) | 
 |  | 
 |  | 
 | /* | 
 |  * iSCSI Host Messages | 
 |  */ | 
 |  | 
 | /* ISCSI_BSG_HST_VENDOR : */ | 
 |  | 
 | /* Request: | 
 |  * Note: When specifying vendor_id, be sure to read the Vendor Type and ID | 
 |  *   formatting requirements specified in scsi_netlink.h | 
 |  */ | 
 | struct iscsi_bsg_host_vendor { | 
 | 	/* | 
 | 	 * Identifies the vendor that the message is formatted for. This | 
 | 	 * should be the recipient of the message. | 
 | 	 */ | 
 | 	uint64_t vendor_id; | 
 |  | 
 | 	/* start of vendor command area */ | 
 | 	uint32_t vendor_cmd[0]; | 
 | }; | 
 |  | 
 | /* Response: | 
 |  */ | 
 | struct iscsi_bsg_host_vendor_reply { | 
 | 	/* start of vendor response area */ | 
 | 	uint32_t vendor_rsp[0]; | 
 | }; | 
 |  | 
 |  | 
 | /* request (CDB) structure of the sg_io_v4 */ | 
 | struct iscsi_bsg_request { | 
 | 	uint32_t msgcode; | 
 | 	union { | 
 | 		struct iscsi_bsg_host_vendor    h_vendor; | 
 | 	} rqst_data; | 
 | } __attribute__((packed)); | 
 |  | 
 |  | 
 | /* response (request sense data) structure of the sg_io_v4 */ | 
 | struct iscsi_bsg_reply { | 
 | 	/* | 
 | 	 * The completion result. Result exists in two forms: | 
 | 	 * if negative, it is an -Exxx system errno value. There will | 
 | 	 * be no further reply information supplied. | 
 | 	 * else, it's the 4-byte scsi error result, with driver, host, | 
 | 	 * msg and status fields. The per-msgcode reply structure | 
 | 	 * will contain valid data. | 
 | 	 */ | 
 | 	uint32_t result; | 
 |  | 
 | 	/* If there was reply_payload, how much was recevied ? */ | 
 | 	uint32_t reply_payload_rcv_len; | 
 |  | 
 | 	union { | 
 | 		struct iscsi_bsg_host_vendor_reply      vendor_reply; | 
 | 	} reply_data; | 
 | }; | 
 |  | 
 |  | 
 | #endif /* SCSI_BSG_ISCSI_H */ |