|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | *  linux/drivers/mmc/core/host.c | 
|  | * | 
|  | *  Copyright (C) 2003 Russell King, All Rights Reserved. | 
|  | *  Copyright (C) 2007-2008 Pierre Ossman | 
|  | *  Copyright (C) 2010 Linus Walleij | 
|  | * | 
|  | *  MMC host class device management | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/idr.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/pm_wakeup.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mmc/card.h> | 
|  | #include <linux/mmc/slot-gpio.h> | 
|  |  | 
|  | #include "core.h" | 
|  | #include "crypto.h" | 
|  | #include "host.h" | 
|  | #include "slot-gpio.h" | 
|  | #include "pwrseq.h" | 
|  | #include "sdio_ops.h" | 
|  |  | 
|  | #define cls_dev_to_mmc_host(d)	container_of(d, struct mmc_host, class_dev) | 
|  |  | 
|  | static DEFINE_IDA(mmc_host_ida); | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int mmc_host_class_prepare(struct device *dev) | 
|  | { | 
|  | struct mmc_host *host = cls_dev_to_mmc_host(dev); | 
|  |  | 
|  | /* | 
|  | * It's safe to access the bus_ops pointer, as both userspace and the | 
|  | * workqueue for detecting cards are frozen at this point. | 
|  | */ | 
|  | if (!host->bus_ops) | 
|  | return 0; | 
|  |  | 
|  | /* Validate conditions for system suspend. */ | 
|  | if (host->bus_ops->pre_suspend) | 
|  | return host->bus_ops->pre_suspend(host); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mmc_host_class_complete(struct device *dev) | 
|  | { | 
|  | struct mmc_host *host = cls_dev_to_mmc_host(dev); | 
|  |  | 
|  | _mmc_detect_change(host, 0, false); | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops mmc_host_class_dev_pm_ops = { | 
|  | .prepare = mmc_host_class_prepare, | 
|  | .complete = mmc_host_class_complete, | 
|  | }; | 
|  |  | 
|  | #define MMC_HOST_CLASS_DEV_PM_OPS (&mmc_host_class_dev_pm_ops) | 
|  | #else | 
|  | #define MMC_HOST_CLASS_DEV_PM_OPS NULL | 
|  | #endif | 
|  |  | 
|  | static void mmc_host_classdev_release(struct device *dev) | 
|  | { | 
|  | struct mmc_host *host = cls_dev_to_mmc_host(dev); | 
|  | wakeup_source_unregister(host->ws); | 
|  | if (of_alias_get_id(host->parent->of_node, "mmc") < 0) | 
|  | ida_simple_remove(&mmc_host_ida, host->index); | 
|  | kfree(host); | 
|  | } | 
|  |  | 
|  | static int mmc_host_classdev_shutdown(struct device *dev) | 
|  | { | 
|  | struct mmc_host *host = cls_dev_to_mmc_host(dev); | 
|  |  | 
|  | __mmc_stop_host(host); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct class mmc_host_class = { | 
|  | .name		= "mmc_host", | 
|  | .dev_release	= mmc_host_classdev_release, | 
|  | .shutdown_pre	= mmc_host_classdev_shutdown, | 
|  | .pm		= MMC_HOST_CLASS_DEV_PM_OPS, | 
|  | }; | 
|  |  | 
|  | int mmc_register_host_class(void) | 
|  | { | 
|  | return class_register(&mmc_host_class); | 
|  | } | 
|  |  | 
|  | void mmc_unregister_host_class(void) | 
|  | { | 
|  | class_unregister(&mmc_host_class); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mmc_retune_enable() - enter a transfer mode that requires retuning | 
|  | * @host: host which should retune now | 
|  | */ | 
|  | void mmc_retune_enable(struct mmc_host *host) | 
|  | { | 
|  | host->can_retune = 1; | 
|  | if (host->retune_period) | 
|  | mod_timer(&host->retune_timer, | 
|  | jiffies + host->retune_period * HZ); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Pause re-tuning for a small set of operations.  The pause begins after the | 
|  | * next command and after first doing re-tuning. | 
|  | */ | 
|  | void mmc_retune_pause(struct mmc_host *host) | 
|  | { | 
|  | if (!host->retune_paused) { | 
|  | host->retune_paused = 1; | 
|  | mmc_retune_needed(host); | 
|  | mmc_retune_hold(host); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(mmc_retune_pause); | 
|  |  | 
|  | void mmc_retune_unpause(struct mmc_host *host) | 
|  | { | 
|  | if (host->retune_paused) { | 
|  | host->retune_paused = 0; | 
|  | mmc_retune_release(host); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(mmc_retune_unpause); | 
|  |  | 
|  | /** | 
|  | * mmc_retune_disable() - exit a transfer mode that requires retuning | 
|  | * @host: host which should not retune anymore | 
|  | * | 
|  | * It is not meant for temporarily preventing retuning! | 
|  | */ | 
|  | void mmc_retune_disable(struct mmc_host *host) | 
|  | { | 
|  | mmc_retune_unpause(host); | 
|  | host->can_retune = 0; | 
|  | del_timer_sync(&host->retune_timer); | 
|  | mmc_retune_clear(host); | 
|  | } | 
|  |  | 
|  | void mmc_retune_timer_stop(struct mmc_host *host) | 
|  | { | 
|  | del_timer_sync(&host->retune_timer); | 
|  | } | 
|  | EXPORT_SYMBOL(mmc_retune_timer_stop); | 
|  |  | 
|  | void mmc_retune_hold(struct mmc_host *host) | 
|  | { | 
|  | if (!host->hold_retune) | 
|  | host->retune_now = 1; | 
|  | host->hold_retune += 1; | 
|  | } | 
|  |  | 
|  | void mmc_retune_release(struct mmc_host *host) | 
|  | { | 
|  | if (host->hold_retune) | 
|  | host->hold_retune -= 1; | 
|  | else | 
|  | WARN_ON(1); | 
|  | } | 
|  | EXPORT_SYMBOL(mmc_retune_release); | 
|  |  | 
|  | int mmc_retune(struct mmc_host *host) | 
|  | { | 
|  | bool return_to_hs400 = false; | 
|  | int err; | 
|  |  | 
|  | if (host->retune_now) | 
|  | host->retune_now = 0; | 
|  | else | 
|  | return 0; | 
|  |  | 
|  | if (!host->need_retune || host->doing_retune || !host->card) | 
|  | return 0; | 
|  |  | 
|  | host->need_retune = 0; | 
|  |  | 
|  | host->doing_retune = 1; | 
|  |  | 
|  | if (host->ios.timing == MMC_TIMING_MMC_HS400) { | 
|  | err = mmc_hs400_to_hs200(host->card); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | return_to_hs400 = true; | 
|  | } | 
|  |  | 
|  | err = mmc_execute_tuning(host->card); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | if (return_to_hs400) | 
|  | err = mmc_hs200_to_hs400(host->card); | 
|  | out: | 
|  | host->doing_retune = 0; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void mmc_retune_timer(struct timer_list *t) | 
|  | { | 
|  | struct mmc_host *host = from_timer(host, t, retune_timer); | 
|  |  | 
|  | mmc_retune_needed(host); | 
|  | } | 
|  |  | 
|  | static void mmc_of_parse_timing_phase(struct device *dev, const char *prop, | 
|  | struct mmc_clk_phase *phase) | 
|  | { | 
|  | int degrees[2] = {0}; | 
|  | int rc; | 
|  |  | 
|  | rc = device_property_read_u32_array(dev, prop, degrees, 2); | 
|  | phase->valid = !rc; | 
|  | if (phase->valid) { | 
|  | phase->in_deg = degrees[0]; | 
|  | phase->out_deg = degrees[1]; | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | mmc_of_parse_clk_phase(struct mmc_host *host, struct mmc_clk_phase_map *map) | 
|  | { | 
|  | struct device *dev = host->parent; | 
|  |  | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-legacy", | 
|  | &map->phase[MMC_TIMING_LEGACY]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs", | 
|  | &map->phase[MMC_TIMING_MMC_HS]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-sd-hs", | 
|  | &map->phase[MMC_TIMING_SD_HS]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr12", | 
|  | &map->phase[MMC_TIMING_UHS_SDR12]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr25", | 
|  | &map->phase[MMC_TIMING_UHS_SDR25]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr50", | 
|  | &map->phase[MMC_TIMING_UHS_SDR50]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr104", | 
|  | &map->phase[MMC_TIMING_UHS_SDR104]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-uhs-ddr50", | 
|  | &map->phase[MMC_TIMING_UHS_DDR50]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-mmc-ddr52", | 
|  | &map->phase[MMC_TIMING_MMC_DDR52]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs200", | 
|  | &map->phase[MMC_TIMING_MMC_HS200]); | 
|  | mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs400", | 
|  | &map->phase[MMC_TIMING_MMC_HS400]); | 
|  | } | 
|  | EXPORT_SYMBOL(mmc_of_parse_clk_phase); | 
|  |  | 
|  | /** | 
|  | * mmc_of_parse() - parse host's device properties | 
|  | * @host: host whose properties should be parsed. | 
|  | * | 
|  | * To keep the rest of the MMC subsystem unaware of whether DT has been | 
|  | * used to to instantiate and configure this host instance or not, we | 
|  | * parse the properties and set respective generic mmc-host flags and | 
|  | * parameters. | 
|  | */ | 
|  | int mmc_of_parse(struct mmc_host *host) | 
|  | { | 
|  | struct device *dev = host->parent; | 
|  | u32 bus_width, drv_type, cd_debounce_delay_ms; | 
|  | int ret; | 
|  |  | 
|  | if (!dev || !dev_fwnode(dev)) | 
|  | return 0; | 
|  |  | 
|  | /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */ | 
|  | if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) { | 
|  | dev_dbg(host->parent, | 
|  | "\"bus-width\" property is missing, assuming 1 bit.\n"); | 
|  | bus_width = 1; | 
|  | } | 
|  |  | 
|  | switch (bus_width) { | 
|  | case 8: | 
|  | host->caps |= MMC_CAP_8_BIT_DATA; | 
|  | fallthrough;	/* Hosts capable of 8-bit can also do 4 bits */ | 
|  | case 4: | 
|  | host->caps |= MMC_CAP_4_BIT_DATA; | 
|  | break; | 
|  | case 1: | 
|  | break; | 
|  | default: | 
|  | dev_err(host->parent, | 
|  | "Invalid \"bus-width\" value %u!\n", bus_width); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* f_max is obtained from the optional "max-frequency" property */ | 
|  | device_property_read_u32(dev, "max-frequency", &host->f_max); | 
|  |  | 
|  | /* | 
|  | * Configure CD and WP pins. They are both by default active low to | 
|  | * match the SDHCI spec. If GPIOs are provided for CD and / or WP, the | 
|  | * mmc-gpio helpers are used to attach, configure and use them. If | 
|  | * polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH | 
|  | * and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the | 
|  | * "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability | 
|  | * is set. If the "non-removable" property is found, the | 
|  | * MMC_CAP_NONREMOVABLE capability is set and no card-detection | 
|  | * configuration is performed. | 
|  | */ | 
|  |  | 
|  | /* Parse Card Detection */ | 
|  |  | 
|  | if (device_property_read_bool(dev, "non-removable")) { | 
|  | host->caps |= MMC_CAP_NONREMOVABLE; | 
|  | } else { | 
|  | if (device_property_read_bool(dev, "cd-inverted")) | 
|  | host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; | 
|  |  | 
|  | if (device_property_read_u32(dev, "cd-debounce-delay-ms", | 
|  | &cd_debounce_delay_ms)) | 
|  | cd_debounce_delay_ms = 200; | 
|  |  | 
|  | if (device_property_read_bool(dev, "broken-cd")) | 
|  | host->caps |= MMC_CAP_NEEDS_POLL; | 
|  |  | 
|  | ret = mmc_gpiod_request_cd(host, "cd", 0, false, | 
|  | cd_debounce_delay_ms * 1000); | 
|  | if (!ret) | 
|  | dev_info(host->parent, "Got CD GPIO\n"); | 
|  | else if (ret != -ENOENT && ret != -ENOSYS) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Parse Write Protection */ | 
|  |  | 
|  | if (device_property_read_bool(dev, "wp-inverted")) | 
|  | host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; | 
|  |  | 
|  | ret = mmc_gpiod_request_ro(host, "wp", 0, 0); | 
|  | if (!ret) | 
|  | dev_info(host->parent, "Got WP GPIO\n"); | 
|  | else if (ret != -ENOENT && ret != -ENOSYS) | 
|  | return ret; | 
|  |  | 
|  | if (device_property_read_bool(dev, "disable-wp")) | 
|  | host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; | 
|  |  | 
|  | if (device_property_read_bool(dev, "cap-sd-highspeed")) | 
|  | host->caps |= MMC_CAP_SD_HIGHSPEED; | 
|  | if (device_property_read_bool(dev, "cap-mmc-highspeed")) | 
|  | host->caps |= MMC_CAP_MMC_HIGHSPEED; | 
|  | if (device_property_read_bool(dev, "sd-uhs-sdr12")) | 
|  | host->caps |= MMC_CAP_UHS_SDR12; | 
|  | if (device_property_read_bool(dev, "sd-uhs-sdr25")) | 
|  | host->caps |= MMC_CAP_UHS_SDR25; | 
|  | if (device_property_read_bool(dev, "sd-uhs-sdr50")) | 
|  | host->caps |= MMC_CAP_UHS_SDR50; | 
|  | if (device_property_read_bool(dev, "sd-uhs-sdr104")) | 
|  | host->caps |= MMC_CAP_UHS_SDR104; | 
|  | if (device_property_read_bool(dev, "sd-uhs-ddr50")) | 
|  | host->caps |= MMC_CAP_UHS_DDR50; | 
|  | if (device_property_read_bool(dev, "cap-power-off-card")) | 
|  | host->caps |= MMC_CAP_POWER_OFF_CARD; | 
|  | if (device_property_read_bool(dev, "cap-mmc-hw-reset")) | 
|  | host->caps |= MMC_CAP_HW_RESET; | 
|  | if (device_property_read_bool(dev, "cap-sdio-irq")) | 
|  | host->caps |= MMC_CAP_SDIO_IRQ; | 
|  | if (device_property_read_bool(dev, "full-pwr-cycle")) | 
|  | host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; | 
|  | if (device_property_read_bool(dev, "full-pwr-cycle-in-suspend")) | 
|  | host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND; | 
|  | if (device_property_read_bool(dev, "keep-power-in-suspend")) | 
|  | host->pm_caps |= MMC_PM_KEEP_POWER; | 
|  | if (device_property_read_bool(dev, "wakeup-source") || | 
|  | device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */ | 
|  | host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; | 
|  | if (device_property_read_bool(dev, "mmc-ddr-3_3v")) | 
|  | host->caps |= MMC_CAP_3_3V_DDR; | 
|  | if (device_property_read_bool(dev, "mmc-ddr-1_8v")) | 
|  | host->caps |= MMC_CAP_1_8V_DDR; | 
|  | if (device_property_read_bool(dev, "mmc-ddr-1_2v")) | 
|  | host->caps |= MMC_CAP_1_2V_DDR; | 
|  | if (device_property_read_bool(dev, "mmc-hs200-1_8v")) | 
|  | host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; | 
|  | if (device_property_read_bool(dev, "mmc-hs200-1_2v")) | 
|  | host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; | 
|  | if (device_property_read_bool(dev, "mmc-hs400-1_8v")) | 
|  | host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; | 
|  | if (device_property_read_bool(dev, "mmc-hs400-1_2v")) | 
|  | host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; | 
|  | if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe")) | 
|  | host->caps2 |= MMC_CAP2_HS400_ES; | 
|  | if (device_property_read_bool(dev, "no-sdio")) | 
|  | host->caps2 |= MMC_CAP2_NO_SDIO; | 
|  | if (device_property_read_bool(dev, "no-sd")) | 
|  | host->caps2 |= MMC_CAP2_NO_SD; | 
|  | if (device_property_read_bool(dev, "no-mmc")) | 
|  | host->caps2 |= MMC_CAP2_NO_MMC; | 
|  | if (device_property_read_bool(dev, "no-mmc-hs400")) | 
|  | host->caps2 &= ~(MMC_CAP2_HS400_1_8V | MMC_CAP2_HS400_1_2V | | 
|  | MMC_CAP2_HS400_ES); | 
|  |  | 
|  | /* Must be after "non-removable" check */ | 
|  | if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) { | 
|  | if (host->caps & MMC_CAP_NONREMOVABLE) | 
|  | host->fixed_drv_type = drv_type; | 
|  | else | 
|  | dev_err(host->parent, | 
|  | "can't use fixed driver type, media is removable\n"); | 
|  | } | 
|  |  | 
|  | host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr); | 
|  | if (host->dsr_req && (host->dsr & ~0xffff)) { | 
|  | dev_err(host->parent, | 
|  | "device tree specified broken value for DSR: 0x%x, ignoring\n", | 
|  | host->dsr); | 
|  | host->dsr_req = 0; | 
|  | } | 
|  |  | 
|  | device_property_read_u32(dev, "post-power-on-delay-ms", | 
|  | &host->ios.power_delay_ms); | 
|  |  | 
|  | return mmc_pwrseq_alloc(host); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_of_parse); | 
|  |  | 
|  | /** | 
|  | * mmc_of_parse_voltage - return mask of supported voltages | 
|  | * @host: host whose properties should be parsed. | 
|  | * @mask: mask of voltages available for MMC/SD/SDIO | 
|  | * | 
|  | * Parse the "voltage-ranges" property, returning zero if it is not | 
|  | * found, negative errno if the voltage-range specification is invalid, | 
|  | * or one if the voltage-range is specified and successfully parsed. | 
|  | */ | 
|  | int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask) | 
|  | { | 
|  | const char *prop = "voltage-ranges"; | 
|  | struct device *dev = host->parent; | 
|  | u32 *voltage_ranges; | 
|  | int num_ranges, i; | 
|  | int ret; | 
|  |  | 
|  | if (!device_property_present(dev, prop)) { | 
|  | dev_dbg(dev, "%s unspecified\n", prop); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ret = device_property_count_u32(dev, prop); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | num_ranges = ret / 2; | 
|  | if (!num_ranges) { | 
|  | dev_err(dev, "%s empty\n", prop); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | voltage_ranges = kcalloc(2 * num_ranges, sizeof(*voltage_ranges), GFP_KERNEL); | 
|  | if (!voltage_ranges) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = device_property_read_u32_array(dev, prop, voltage_ranges, 2 * num_ranges); | 
|  | if (ret) { | 
|  | kfree(voltage_ranges); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < num_ranges; i++) { | 
|  | const int j = i * 2; | 
|  | u32 ocr_mask; | 
|  |  | 
|  | ocr_mask = mmc_vddrange_to_ocrmask(voltage_ranges[j + 0], | 
|  | voltage_ranges[j + 1]); | 
|  | if (!ocr_mask) { | 
|  | dev_err(dev, "range #%d in %s is invalid\n", i, prop); | 
|  | kfree(voltage_ranges); | 
|  | return -EINVAL; | 
|  | } | 
|  | *mask |= ocr_mask; | 
|  | } | 
|  |  | 
|  | kfree(voltage_ranges); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | EXPORT_SYMBOL(mmc_of_parse_voltage); | 
|  |  | 
|  | /** | 
|  | * mmc_first_nonreserved_index() - get the first index that is not reserved | 
|  | */ | 
|  | static int mmc_first_nonreserved_index(void) | 
|  | { | 
|  | int max; | 
|  |  | 
|  | max = of_alias_get_highest_id("mmc"); | 
|  | if (max < 0) | 
|  | return 0; | 
|  |  | 
|  | return max + 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	mmc_alloc_host - initialise the per-host structure. | 
|  | *	@extra: sizeof private data structure | 
|  | *	@dev: pointer to host device model structure | 
|  | * | 
|  | *	Initialise the per-host structure. | 
|  | */ | 
|  | struct mmc_host *mmc_alloc_host(int extra, struct device *dev) | 
|  | { | 
|  | int index; | 
|  | struct mmc_host *host; | 
|  | int alias_id, min_idx, max_idx; | 
|  |  | 
|  | host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); | 
|  | if (!host) | 
|  | return NULL; | 
|  |  | 
|  | /* scanning will be enabled when we're ready */ | 
|  | host->rescan_disable = 1; | 
|  |  | 
|  | alias_id = of_alias_get_id(dev->of_node, "mmc"); | 
|  | if (alias_id >= 0) { | 
|  | index = alias_id; | 
|  | } else { | 
|  | min_idx = mmc_first_nonreserved_index(); | 
|  | max_idx = 0; | 
|  |  | 
|  | index = ida_simple_get(&mmc_host_ida, min_idx, max_idx, GFP_KERNEL); | 
|  | if (index < 0) { | 
|  | kfree(host); | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | host->index = index; | 
|  |  | 
|  | dev_set_name(&host->class_dev, "mmc%d", host->index); | 
|  | host->ws = wakeup_source_register(NULL, dev_name(&host->class_dev)); | 
|  |  | 
|  | host->parent = dev; | 
|  | host->class_dev.parent = dev; | 
|  | host->class_dev.class = &mmc_host_class; | 
|  | device_initialize(&host->class_dev); | 
|  | device_enable_async_suspend(&host->class_dev); | 
|  |  | 
|  | if (mmc_gpio_alloc(host)) { | 
|  | put_device(&host->class_dev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&host->lock); | 
|  | init_waitqueue_head(&host->wq); | 
|  | INIT_DELAYED_WORK(&host->detect, mmc_rescan); | 
|  | INIT_DELAYED_WORK(&host->sdio_irq_work, sdio_irq_work); | 
|  | timer_setup(&host->retune_timer, mmc_retune_timer, 0); | 
|  |  | 
|  | /* | 
|  | * By default, hosts do not support SGIO or large requests. | 
|  | * They have to set these according to their abilities. | 
|  | */ | 
|  | host->max_segs = 1; | 
|  | host->max_seg_size = PAGE_SIZE; | 
|  |  | 
|  | host->max_req_size = PAGE_SIZE; | 
|  | host->max_blk_size = 512; | 
|  | host->max_blk_count = PAGE_SIZE / 512; | 
|  |  | 
|  | host->fixed_drv_type = -EINVAL; | 
|  | host->ios.power_delay_ms = 10; | 
|  | host->ios.power_mode = MMC_POWER_UNDEFINED; | 
|  |  | 
|  | return host; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_alloc_host); | 
|  |  | 
|  | static int mmc_validate_host_caps(struct mmc_host *host) | 
|  | { | 
|  | if (host->caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) { | 
|  | dev_warn(host->parent, "missing ->enable_sdio_irq() ops\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	mmc_add_host - initialise host hardware | 
|  | *	@host: mmc host | 
|  | * | 
|  | *	Register the host with the driver model. The host must be | 
|  | *	prepared to start servicing requests before this function | 
|  | *	completes. | 
|  | */ | 
|  | int mmc_add_host(struct mmc_host *host) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = mmc_validate_host_caps(host); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = device_add(&host->class_dev); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | led_trigger_register_simple(dev_name(&host->class_dev), &host->led); | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | mmc_add_host_debugfs(host); | 
|  | #endif | 
|  |  | 
|  | mmc_start_host(host); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_add_host); | 
|  |  | 
|  | /** | 
|  | *	mmc_remove_host - remove host hardware | 
|  | *	@host: mmc host | 
|  | * | 
|  | *	Unregister and remove all cards associated with this host, | 
|  | *	and power down the MMC bus. No new requests will be issued | 
|  | *	after this function has returned. | 
|  | */ | 
|  | void mmc_remove_host(struct mmc_host *host) | 
|  | { | 
|  | mmc_stop_host(host); | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | mmc_remove_host_debugfs(host); | 
|  | #endif | 
|  |  | 
|  | device_del(&host->class_dev); | 
|  |  | 
|  | led_trigger_unregister_simple(host->led); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_remove_host); | 
|  |  | 
|  | /** | 
|  | *	mmc_free_host - free the host structure | 
|  | *	@host: mmc host | 
|  | * | 
|  | *	Free the host once all references to it have been dropped. | 
|  | */ | 
|  | void mmc_free_host(struct mmc_host *host) | 
|  | { | 
|  | mmc_pwrseq_free(host); | 
|  | put_device(&host->class_dev); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(mmc_free_host); |