|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Copyright (C) 2012 Samsung Electronics Co.Ltd | 
|  | * Authors: Joonyoung Shim <jy0922.shim@samsung.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/refcount.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/component.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/uaccess.h> | 
|  | #include <linux/workqueue.h> | 
|  |  | 
|  | #include <drm/drm_file.h> | 
|  | #include <drm/exynos_drm.h> | 
|  |  | 
|  | #include "exynos_drm_drv.h" | 
|  | #include "exynos_drm_g2d.h" | 
|  | #include "exynos_drm_gem.h" | 
|  |  | 
|  | #define G2D_HW_MAJOR_VER		4 | 
|  | #define G2D_HW_MINOR_VER		1 | 
|  |  | 
|  | /* vaild register range set from user: 0x0104 ~ 0x0880 */ | 
|  | #define G2D_VALID_START			0x0104 | 
|  | #define G2D_VALID_END			0x0880 | 
|  |  | 
|  | /* general registers */ | 
|  | #define G2D_SOFT_RESET			0x0000 | 
|  | #define G2D_INTEN			0x0004 | 
|  | #define G2D_INTC_PEND			0x000C | 
|  | #define G2D_DMA_SFR_BASE_ADDR		0x0080 | 
|  | #define G2D_DMA_COMMAND			0x0084 | 
|  | #define G2D_DMA_STATUS			0x008C | 
|  | #define G2D_DMA_HOLD_CMD		0x0090 | 
|  |  | 
|  | /* command registers */ | 
|  | #define G2D_BITBLT_START		0x0100 | 
|  |  | 
|  | /* registers for base address */ | 
|  | #define G2D_SRC_BASE_ADDR		0x0304 | 
|  | #define G2D_SRC_STRIDE			0x0308 | 
|  | #define G2D_SRC_COLOR_MODE		0x030C | 
|  | #define G2D_SRC_LEFT_TOP		0x0310 | 
|  | #define G2D_SRC_RIGHT_BOTTOM		0x0314 | 
|  | #define G2D_SRC_PLANE2_BASE_ADDR	0x0318 | 
|  | #define G2D_DST_BASE_ADDR		0x0404 | 
|  | #define G2D_DST_STRIDE			0x0408 | 
|  | #define G2D_DST_COLOR_MODE		0x040C | 
|  | #define G2D_DST_LEFT_TOP		0x0410 | 
|  | #define G2D_DST_RIGHT_BOTTOM		0x0414 | 
|  | #define G2D_DST_PLANE2_BASE_ADDR	0x0418 | 
|  | #define G2D_PAT_BASE_ADDR		0x0500 | 
|  | #define G2D_MSK_BASE_ADDR		0x0520 | 
|  |  | 
|  | /* G2D_SOFT_RESET */ | 
|  | #define G2D_SFRCLEAR			(1 << 1) | 
|  | #define G2D_R				(1 << 0) | 
|  |  | 
|  | /* G2D_INTEN */ | 
|  | #define G2D_INTEN_ACF			(1 << 3) | 
|  | #define G2D_INTEN_UCF			(1 << 2) | 
|  | #define G2D_INTEN_GCF			(1 << 1) | 
|  | #define G2D_INTEN_SCF			(1 << 0) | 
|  |  | 
|  | /* G2D_INTC_PEND */ | 
|  | #define G2D_INTP_ACMD_FIN		(1 << 3) | 
|  | #define G2D_INTP_UCMD_FIN		(1 << 2) | 
|  | #define G2D_INTP_GCMD_FIN		(1 << 1) | 
|  | #define G2D_INTP_SCMD_FIN		(1 << 0) | 
|  |  | 
|  | /* G2D_DMA_COMMAND */ | 
|  | #define G2D_DMA_HALT			(1 << 2) | 
|  | #define G2D_DMA_CONTINUE		(1 << 1) | 
|  | #define G2D_DMA_START			(1 << 0) | 
|  |  | 
|  | /* G2D_DMA_STATUS */ | 
|  | #define G2D_DMA_LIST_DONE_COUNT		(0xFF << 17) | 
|  | #define G2D_DMA_BITBLT_DONE_COUNT	(0xFFFF << 1) | 
|  | #define G2D_DMA_DONE			(1 << 0) | 
|  | #define G2D_DMA_LIST_DONE_COUNT_OFFSET	17 | 
|  |  | 
|  | /* G2D_DMA_HOLD_CMD */ | 
|  | #define G2D_USER_HOLD			(1 << 2) | 
|  | #define G2D_LIST_HOLD			(1 << 1) | 
|  | #define G2D_BITBLT_HOLD			(1 << 0) | 
|  |  | 
|  | /* G2D_BITBLT_START */ | 
|  | #define G2D_START_CASESEL		(1 << 2) | 
|  | #define G2D_START_NHOLT			(1 << 1) | 
|  | #define G2D_START_BITBLT		(1 << 0) | 
|  |  | 
|  | /* buffer color format */ | 
|  | #define G2D_FMT_XRGB8888		0 | 
|  | #define G2D_FMT_ARGB8888		1 | 
|  | #define G2D_FMT_RGB565			2 | 
|  | #define G2D_FMT_XRGB1555		3 | 
|  | #define G2D_FMT_ARGB1555		4 | 
|  | #define G2D_FMT_XRGB4444		5 | 
|  | #define G2D_FMT_ARGB4444		6 | 
|  | #define G2D_FMT_PACKED_RGB888		7 | 
|  | #define G2D_FMT_A8			11 | 
|  | #define G2D_FMT_L8			12 | 
|  |  | 
|  | /* buffer valid length */ | 
|  | #define G2D_LEN_MIN			1 | 
|  | #define G2D_LEN_MAX			8000 | 
|  |  | 
|  | #define G2D_CMDLIST_SIZE		(PAGE_SIZE / 4) | 
|  | #define G2D_CMDLIST_NUM			64 | 
|  | #define G2D_CMDLIST_POOL_SIZE		(G2D_CMDLIST_SIZE * G2D_CMDLIST_NUM) | 
|  | #define G2D_CMDLIST_DATA_NUM		(G2D_CMDLIST_SIZE / sizeof(u32) - 2) | 
|  |  | 
|  | /* maximum buffer pool size of userptr is 64MB as default */ | 
|  | #define MAX_POOL		(64 * 1024 * 1024) | 
|  |  | 
|  | enum { | 
|  | BUF_TYPE_GEM = 1, | 
|  | BUF_TYPE_USERPTR, | 
|  | }; | 
|  |  | 
|  | enum g2d_reg_type { | 
|  | REG_TYPE_NONE = -1, | 
|  | REG_TYPE_SRC, | 
|  | REG_TYPE_SRC_PLANE2, | 
|  | REG_TYPE_DST, | 
|  | REG_TYPE_DST_PLANE2, | 
|  | REG_TYPE_PAT, | 
|  | REG_TYPE_MSK, | 
|  | MAX_REG_TYPE_NR | 
|  | }; | 
|  |  | 
|  | enum g2d_flag_bits { | 
|  | /* | 
|  | * If set, suspends the runqueue worker after the currently | 
|  | * processed node is finished. | 
|  | */ | 
|  | G2D_BIT_SUSPEND_RUNQUEUE, | 
|  | /* | 
|  | * If set, indicates that the engine is currently busy. | 
|  | */ | 
|  | G2D_BIT_ENGINE_BUSY, | 
|  | }; | 
|  |  | 
|  | /* cmdlist data structure */ | 
|  | struct g2d_cmdlist { | 
|  | u32		head; | 
|  | unsigned long	data[G2D_CMDLIST_DATA_NUM]; | 
|  | u32		last;	/* last data offset */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * A structure of buffer description | 
|  | * | 
|  | * @format: color format | 
|  | * @stride: buffer stride/pitch in bytes | 
|  | * @left_x: the x coordinates of left top corner | 
|  | * @top_y: the y coordinates of left top corner | 
|  | * @right_x: the x coordinates of right bottom corner | 
|  | * @bottom_y: the y coordinates of right bottom corner | 
|  | * | 
|  | */ | 
|  | struct g2d_buf_desc { | 
|  | unsigned int	format; | 
|  | unsigned int	stride; | 
|  | unsigned int	left_x; | 
|  | unsigned int	top_y; | 
|  | unsigned int	right_x; | 
|  | unsigned int	bottom_y; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * A structure of buffer information | 
|  | * | 
|  | * @map_nr: manages the number of mapped buffers | 
|  | * @reg_types: stores regitster type in the order of requested command | 
|  | * @handles: stores buffer handle in its reg_type position | 
|  | * @types: stores buffer type in its reg_type position | 
|  | * @descs: stores buffer description in its reg_type position | 
|  | * | 
|  | */ | 
|  | struct g2d_buf_info { | 
|  | unsigned int		map_nr; | 
|  | enum g2d_reg_type	reg_types[MAX_REG_TYPE_NR]; | 
|  | void			*obj[MAX_REG_TYPE_NR]; | 
|  | unsigned int		types[MAX_REG_TYPE_NR]; | 
|  | struct g2d_buf_desc	descs[MAX_REG_TYPE_NR]; | 
|  | }; | 
|  |  | 
|  | struct drm_exynos_pending_g2d_event { | 
|  | struct drm_pending_event	base; | 
|  | struct drm_exynos_g2d_event	event; | 
|  | }; | 
|  |  | 
|  | struct g2d_cmdlist_userptr { | 
|  | struct list_head	list; | 
|  | dma_addr_t		dma_addr; | 
|  | unsigned long		userptr; | 
|  | unsigned long		size; | 
|  | struct page		**pages; | 
|  | unsigned int		npages; | 
|  | struct sg_table		*sgt; | 
|  | refcount_t		refcount; | 
|  | bool			in_pool; | 
|  | bool			out_of_list; | 
|  | }; | 
|  | struct g2d_cmdlist_node { | 
|  | struct list_head	list; | 
|  | struct g2d_cmdlist	*cmdlist; | 
|  | dma_addr_t		dma_addr; | 
|  | struct g2d_buf_info	buf_info; | 
|  |  | 
|  | struct drm_exynos_pending_g2d_event	*event; | 
|  | }; | 
|  |  | 
|  | struct g2d_runqueue_node { | 
|  | struct list_head	list; | 
|  | struct list_head	run_cmdlist; | 
|  | struct list_head	event_list; | 
|  | struct drm_file		*filp; | 
|  | pid_t			pid; | 
|  | struct completion	complete; | 
|  | int			async; | 
|  | }; | 
|  |  | 
|  | struct g2d_data { | 
|  | struct device			*dev; | 
|  | void				*dma_priv; | 
|  | struct clk			*gate_clk; | 
|  | void __iomem			*regs; | 
|  | int				irq; | 
|  | struct workqueue_struct		*g2d_workq; | 
|  | struct work_struct		runqueue_work; | 
|  | struct drm_device		*drm_dev; | 
|  | unsigned long			flags; | 
|  |  | 
|  | /* cmdlist */ | 
|  | struct g2d_cmdlist_node		*cmdlist_node; | 
|  | struct list_head		free_cmdlist; | 
|  | struct mutex			cmdlist_mutex; | 
|  | dma_addr_t			cmdlist_pool; | 
|  | void				*cmdlist_pool_virt; | 
|  | unsigned long			cmdlist_dma_attrs; | 
|  |  | 
|  | /* runqueue*/ | 
|  | struct g2d_runqueue_node	*runqueue_node; | 
|  | struct list_head		runqueue; | 
|  | struct mutex			runqueue_mutex; | 
|  | struct kmem_cache		*runqueue_slab; | 
|  |  | 
|  | unsigned long			current_pool; | 
|  | unsigned long			max_pool; | 
|  | }; | 
|  |  | 
|  | static inline void g2d_hw_reset(struct g2d_data *g2d) | 
|  | { | 
|  | writel(G2D_R | G2D_SFRCLEAR, g2d->regs + G2D_SOFT_RESET); | 
|  | clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags); | 
|  | } | 
|  |  | 
|  | static int g2d_init_cmdlist(struct g2d_data *g2d) | 
|  | { | 
|  | struct device *dev = g2d->dev; | 
|  | struct g2d_cmdlist_node *node; | 
|  | int nr; | 
|  | int ret; | 
|  | struct g2d_buf_info *buf_info; | 
|  |  | 
|  | g2d->cmdlist_dma_attrs = DMA_ATTR_WRITE_COMBINE; | 
|  |  | 
|  | g2d->cmdlist_pool_virt = dma_alloc_attrs(to_dma_dev(g2d->drm_dev), | 
|  | G2D_CMDLIST_POOL_SIZE, | 
|  | &g2d->cmdlist_pool, GFP_KERNEL, | 
|  | g2d->cmdlist_dma_attrs); | 
|  | if (!g2d->cmdlist_pool_virt) { | 
|  | dev_err(dev, "failed to allocate dma memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | node = kcalloc(G2D_CMDLIST_NUM, sizeof(*node), GFP_KERNEL); | 
|  | if (!node) { | 
|  | ret = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | for (nr = 0; nr < G2D_CMDLIST_NUM; nr++) { | 
|  | unsigned int i; | 
|  |  | 
|  | node[nr].cmdlist = | 
|  | g2d->cmdlist_pool_virt + nr * G2D_CMDLIST_SIZE; | 
|  | node[nr].dma_addr = | 
|  | g2d->cmdlist_pool + nr * G2D_CMDLIST_SIZE; | 
|  |  | 
|  | buf_info = &node[nr].buf_info; | 
|  | for (i = 0; i < MAX_REG_TYPE_NR; i++) | 
|  | buf_info->reg_types[i] = REG_TYPE_NONE; | 
|  |  | 
|  | list_add_tail(&node[nr].list, &g2d->free_cmdlist); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | dma_free_attrs(to_dma_dev(g2d->drm_dev), G2D_CMDLIST_POOL_SIZE, | 
|  | g2d->cmdlist_pool_virt, | 
|  | g2d->cmdlist_pool, g2d->cmdlist_dma_attrs); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void g2d_fini_cmdlist(struct g2d_data *g2d) | 
|  | { | 
|  | kfree(g2d->cmdlist_node); | 
|  |  | 
|  | if (g2d->cmdlist_pool_virt && g2d->cmdlist_pool) { | 
|  | dma_free_attrs(to_dma_dev(g2d->drm_dev), | 
|  | G2D_CMDLIST_POOL_SIZE, | 
|  | g2d->cmdlist_pool_virt, | 
|  | g2d->cmdlist_pool, g2d->cmdlist_dma_attrs); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct g2d_cmdlist_node *g2d_get_cmdlist(struct g2d_data *g2d) | 
|  | { | 
|  | struct device *dev = g2d->dev; | 
|  | struct g2d_cmdlist_node *node; | 
|  |  | 
|  | mutex_lock(&g2d->cmdlist_mutex); | 
|  | if (list_empty(&g2d->free_cmdlist)) { | 
|  | dev_err(dev, "there is no free cmdlist\n"); | 
|  | mutex_unlock(&g2d->cmdlist_mutex); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | node = list_first_entry(&g2d->free_cmdlist, struct g2d_cmdlist_node, | 
|  | list); | 
|  | list_del_init(&node->list); | 
|  | mutex_unlock(&g2d->cmdlist_mutex); | 
|  |  | 
|  | return node; | 
|  | } | 
|  |  | 
|  | static void g2d_put_cmdlist(struct g2d_data *g2d, struct g2d_cmdlist_node *node) | 
|  | { | 
|  | mutex_lock(&g2d->cmdlist_mutex); | 
|  | list_move_tail(&node->list, &g2d->free_cmdlist); | 
|  | mutex_unlock(&g2d->cmdlist_mutex); | 
|  | } | 
|  |  | 
|  | static void g2d_add_cmdlist_to_inuse(struct drm_exynos_file_private *file_priv, | 
|  | struct g2d_cmdlist_node *node) | 
|  | { | 
|  | struct g2d_cmdlist_node *lnode; | 
|  |  | 
|  | if (list_empty(&file_priv->inuse_cmdlist)) | 
|  | goto add_to_list; | 
|  |  | 
|  | /* this links to base address of new cmdlist */ | 
|  | lnode = list_entry(file_priv->inuse_cmdlist.prev, | 
|  | struct g2d_cmdlist_node, list); | 
|  | lnode->cmdlist->data[lnode->cmdlist->last] = node->dma_addr; | 
|  |  | 
|  | add_to_list: | 
|  | list_add_tail(&node->list, &file_priv->inuse_cmdlist); | 
|  |  | 
|  | if (node->event) | 
|  | list_add_tail(&node->event->base.link, &file_priv->event_list); | 
|  | } | 
|  |  | 
|  | static void g2d_userptr_put_dma_addr(struct g2d_data *g2d, | 
|  | void *obj, | 
|  | bool force) | 
|  | { | 
|  | struct g2d_cmdlist_userptr *g2d_userptr = obj; | 
|  |  | 
|  | if (!obj) | 
|  | return; | 
|  |  | 
|  | if (force) | 
|  | goto out; | 
|  |  | 
|  | refcount_dec(&g2d_userptr->refcount); | 
|  |  | 
|  | if (refcount_read(&g2d_userptr->refcount) > 0) | 
|  | return; | 
|  |  | 
|  | if (g2d_userptr->in_pool) | 
|  | return; | 
|  |  | 
|  | out: | 
|  | dma_unmap_sgtable(to_dma_dev(g2d->drm_dev), g2d_userptr->sgt, | 
|  | DMA_BIDIRECTIONAL, 0); | 
|  |  | 
|  | unpin_user_pages_dirty_lock(g2d_userptr->pages, g2d_userptr->npages, | 
|  | true); | 
|  | kvfree(g2d_userptr->pages); | 
|  |  | 
|  | if (!g2d_userptr->out_of_list) | 
|  | list_del_init(&g2d_userptr->list); | 
|  |  | 
|  | sg_free_table(g2d_userptr->sgt); | 
|  | kfree(g2d_userptr->sgt); | 
|  | kfree(g2d_userptr); | 
|  | } | 
|  |  | 
|  | static dma_addr_t *g2d_userptr_get_dma_addr(struct g2d_data *g2d, | 
|  | unsigned long userptr, | 
|  | unsigned long size, | 
|  | struct drm_file *filp, | 
|  | void **obj) | 
|  | { | 
|  | struct drm_exynos_file_private *file_priv = filp->driver_priv; | 
|  | struct g2d_cmdlist_userptr *g2d_userptr; | 
|  | struct sg_table	*sgt; | 
|  | unsigned long start, end; | 
|  | unsigned int npages, offset; | 
|  | int ret; | 
|  |  | 
|  | if (!size) { | 
|  | DRM_DEV_ERROR(g2d->dev, "invalid userptr size.\n"); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | /* check if userptr already exists in userptr_list. */ | 
|  | list_for_each_entry(g2d_userptr, &file_priv->userptr_list, list) { | 
|  | if (g2d_userptr->userptr == userptr) { | 
|  | /* | 
|  | * also check size because there could be same address | 
|  | * and different size. | 
|  | */ | 
|  | if (g2d_userptr->size == size) { | 
|  | refcount_inc(&g2d_userptr->refcount); | 
|  | *obj = g2d_userptr; | 
|  |  | 
|  | return &g2d_userptr->dma_addr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * at this moment, maybe g2d dma is accessing this | 
|  | * g2d_userptr memory region so just remove this | 
|  | * g2d_userptr object from userptr_list not to be | 
|  | * referred again and also except it the userptr | 
|  | * pool to be released after the dma access completion. | 
|  | */ | 
|  | g2d_userptr->out_of_list = true; | 
|  | g2d_userptr->in_pool = false; | 
|  | list_del_init(&g2d_userptr->list); | 
|  |  | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | g2d_userptr = kzalloc(sizeof(*g2d_userptr), GFP_KERNEL); | 
|  | if (!g2d_userptr) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | refcount_set(&g2d_userptr->refcount, 1); | 
|  | g2d_userptr->size = size; | 
|  |  | 
|  | start = userptr & PAGE_MASK; | 
|  | offset = userptr & ~PAGE_MASK; | 
|  | end = PAGE_ALIGN(userptr + size); | 
|  | npages = (end - start) >> PAGE_SHIFT; | 
|  | g2d_userptr->pages = kvmalloc_array(npages, sizeof(*g2d_userptr->pages), | 
|  | GFP_KERNEL); | 
|  | if (!g2d_userptr->pages) { | 
|  | ret = -ENOMEM; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | ret = pin_user_pages_fast(start, npages, | 
|  | FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM, | 
|  | g2d_userptr->pages); | 
|  | if (ret != npages) { | 
|  | DRM_DEV_ERROR(g2d->dev, | 
|  | "failed to get user pages from userptr.\n"); | 
|  | if (ret < 0) | 
|  | goto err_destroy_pages; | 
|  | npages = ret; | 
|  | ret = -EFAULT; | 
|  | goto err_unpin_pages; | 
|  | } | 
|  | g2d_userptr->npages = npages; | 
|  |  | 
|  | sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); | 
|  | if (!sgt) { | 
|  | ret = -ENOMEM; | 
|  | goto err_unpin_pages; | 
|  | } | 
|  |  | 
|  | ret = sg_alloc_table_from_pages(sgt, | 
|  | g2d_userptr->pages, | 
|  | npages, offset, size, GFP_KERNEL); | 
|  | if (ret < 0) { | 
|  | DRM_DEV_ERROR(g2d->dev, "failed to get sgt from pages.\n"); | 
|  | goto err_free_sgt; | 
|  | } | 
|  |  | 
|  | g2d_userptr->sgt = sgt; | 
|  |  | 
|  | ret = dma_map_sgtable(to_dma_dev(g2d->drm_dev), sgt, | 
|  | DMA_BIDIRECTIONAL, 0); | 
|  | if (ret) { | 
|  | DRM_DEV_ERROR(g2d->dev, "failed to map sgt with dma region.\n"); | 
|  | goto err_sg_free_table; | 
|  | } | 
|  |  | 
|  | g2d_userptr->dma_addr = sgt->sgl[0].dma_address; | 
|  | g2d_userptr->userptr = userptr; | 
|  |  | 
|  | list_add_tail(&g2d_userptr->list, &file_priv->userptr_list); | 
|  |  | 
|  | if (g2d->current_pool + (npages << PAGE_SHIFT) < g2d->max_pool) { | 
|  | g2d->current_pool += npages << PAGE_SHIFT; | 
|  | g2d_userptr->in_pool = true; | 
|  | } | 
|  |  | 
|  | *obj = g2d_userptr; | 
|  |  | 
|  | return &g2d_userptr->dma_addr; | 
|  |  | 
|  | err_sg_free_table: | 
|  | sg_free_table(sgt); | 
|  |  | 
|  | err_free_sgt: | 
|  | kfree(sgt); | 
|  |  | 
|  | err_unpin_pages: | 
|  | unpin_user_pages(g2d_userptr->pages, npages); | 
|  |  | 
|  | err_destroy_pages: | 
|  | kvfree(g2d_userptr->pages); | 
|  |  | 
|  | err_free: | 
|  | kfree(g2d_userptr); | 
|  |  | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | static void g2d_userptr_free_all(struct g2d_data *g2d, struct drm_file *filp) | 
|  | { | 
|  | struct drm_exynos_file_private *file_priv = filp->driver_priv; | 
|  | struct g2d_cmdlist_userptr *g2d_userptr, *n; | 
|  |  | 
|  | list_for_each_entry_safe(g2d_userptr, n, &file_priv->userptr_list, list) | 
|  | if (g2d_userptr->in_pool) | 
|  | g2d_userptr_put_dma_addr(g2d, g2d_userptr, true); | 
|  |  | 
|  | g2d->current_pool = 0; | 
|  | } | 
|  |  | 
|  | static enum g2d_reg_type g2d_get_reg_type(struct g2d_data *g2d, int reg_offset) | 
|  | { | 
|  | enum g2d_reg_type reg_type; | 
|  |  | 
|  | switch (reg_offset) { | 
|  | case G2D_SRC_BASE_ADDR: | 
|  | case G2D_SRC_STRIDE: | 
|  | case G2D_SRC_COLOR_MODE: | 
|  | case G2D_SRC_LEFT_TOP: | 
|  | case G2D_SRC_RIGHT_BOTTOM: | 
|  | reg_type = REG_TYPE_SRC; | 
|  | break; | 
|  | case G2D_SRC_PLANE2_BASE_ADDR: | 
|  | reg_type = REG_TYPE_SRC_PLANE2; | 
|  | break; | 
|  | case G2D_DST_BASE_ADDR: | 
|  | case G2D_DST_STRIDE: | 
|  | case G2D_DST_COLOR_MODE: | 
|  | case G2D_DST_LEFT_TOP: | 
|  | case G2D_DST_RIGHT_BOTTOM: | 
|  | reg_type = REG_TYPE_DST; | 
|  | break; | 
|  | case G2D_DST_PLANE2_BASE_ADDR: | 
|  | reg_type = REG_TYPE_DST_PLANE2; | 
|  | break; | 
|  | case G2D_PAT_BASE_ADDR: | 
|  | reg_type = REG_TYPE_PAT; | 
|  | break; | 
|  | case G2D_MSK_BASE_ADDR: | 
|  | reg_type = REG_TYPE_MSK; | 
|  | break; | 
|  | default: | 
|  | reg_type = REG_TYPE_NONE; | 
|  | DRM_DEV_ERROR(g2d->dev, "Unknown register offset![%d]\n", | 
|  | reg_offset); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return reg_type; | 
|  | } | 
|  |  | 
|  | static unsigned long g2d_get_buf_bpp(unsigned int format) | 
|  | { | 
|  | unsigned long bpp; | 
|  |  | 
|  | switch (format) { | 
|  | case G2D_FMT_XRGB8888: | 
|  | case G2D_FMT_ARGB8888: | 
|  | bpp = 4; | 
|  | break; | 
|  | case G2D_FMT_RGB565: | 
|  | case G2D_FMT_XRGB1555: | 
|  | case G2D_FMT_ARGB1555: | 
|  | case G2D_FMT_XRGB4444: | 
|  | case G2D_FMT_ARGB4444: | 
|  | bpp = 2; | 
|  | break; | 
|  | case G2D_FMT_PACKED_RGB888: | 
|  | bpp = 3; | 
|  | break; | 
|  | default: | 
|  | bpp = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return bpp; | 
|  | } | 
|  |  | 
|  | static bool g2d_check_buf_desc_is_valid(struct g2d_data *g2d, | 
|  | struct g2d_buf_desc *buf_desc, | 
|  | enum g2d_reg_type reg_type, | 
|  | unsigned long size) | 
|  | { | 
|  | int width, height; | 
|  | unsigned long bpp, last_pos; | 
|  |  | 
|  | /* | 
|  | * check source and destination buffers only. | 
|  | * so the others are always valid. | 
|  | */ | 
|  | if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST) | 
|  | return true; | 
|  |  | 
|  | /* This check also makes sure that right_x > left_x. */ | 
|  | width = (int)buf_desc->right_x - (int)buf_desc->left_x; | 
|  | if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) { | 
|  | DRM_DEV_ERROR(g2d->dev, "width[%d] is out of range!\n", width); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* This check also makes sure that bottom_y > top_y. */ | 
|  | height = (int)buf_desc->bottom_y - (int)buf_desc->top_y; | 
|  | if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) { | 
|  | DRM_DEV_ERROR(g2d->dev, | 
|  | "height[%d] is out of range!\n", height); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bpp = g2d_get_buf_bpp(buf_desc->format); | 
|  |  | 
|  | /* Compute the position of the last byte that the engine accesses. */ | 
|  | last_pos = ((unsigned long)buf_desc->bottom_y - 1) * | 
|  | (unsigned long)buf_desc->stride + | 
|  | (unsigned long)buf_desc->right_x * bpp - 1; | 
|  |  | 
|  | /* | 
|  | * Since right_x > left_x and bottom_y > top_y we already know | 
|  | * that the first_pos < last_pos (first_pos being the position | 
|  | * of the first byte the engine accesses), it just remains to | 
|  | * check if last_pos is smaller then the buffer size. | 
|  | */ | 
|  |  | 
|  | if (last_pos >= size) { | 
|  | DRM_DEV_ERROR(g2d->dev, "last engine access position [%lu] " | 
|  | "is out of range [%lu]!\n", last_pos, size); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int g2d_map_cmdlist_gem(struct g2d_data *g2d, | 
|  | struct g2d_cmdlist_node *node, | 
|  | struct drm_device *drm_dev, | 
|  | struct drm_file *file) | 
|  | { | 
|  | struct g2d_cmdlist *cmdlist = node->cmdlist; | 
|  | struct g2d_buf_info *buf_info = &node->buf_info; | 
|  | int offset; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < buf_info->map_nr; i++) { | 
|  | struct g2d_buf_desc *buf_desc; | 
|  | enum g2d_reg_type reg_type; | 
|  | int reg_pos; | 
|  | unsigned long handle; | 
|  | dma_addr_t *addr; | 
|  |  | 
|  | reg_pos = cmdlist->last - 2 * (i + 1); | 
|  |  | 
|  | offset = cmdlist->data[reg_pos]; | 
|  | handle = cmdlist->data[reg_pos + 1]; | 
|  |  | 
|  | reg_type = g2d_get_reg_type(g2d, offset); | 
|  | if (reg_type == REG_TYPE_NONE) { | 
|  | ret = -EFAULT; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | buf_desc = &buf_info->descs[reg_type]; | 
|  |  | 
|  | if (buf_info->types[reg_type] == BUF_TYPE_GEM) { | 
|  | struct exynos_drm_gem *exynos_gem; | 
|  |  | 
|  | exynos_gem = exynos_drm_gem_get(file, handle); | 
|  | if (!exynos_gem) { | 
|  | ret = -EFAULT; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (!g2d_check_buf_desc_is_valid(g2d, buf_desc, | 
|  | reg_type, exynos_gem->size)) { | 
|  | exynos_drm_gem_put(exynos_gem); | 
|  | ret = -EFAULT; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | addr = &exynos_gem->dma_addr; | 
|  | buf_info->obj[reg_type] = exynos_gem; | 
|  | } else { | 
|  | struct drm_exynos_g2d_userptr g2d_userptr; | 
|  |  | 
|  | if (copy_from_user(&g2d_userptr, (void __user *)handle, | 
|  | sizeof(struct drm_exynos_g2d_userptr))) { | 
|  | ret = -EFAULT; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (!g2d_check_buf_desc_is_valid(g2d, buf_desc, | 
|  | reg_type, | 
|  | g2d_userptr.size)) { | 
|  | ret = -EFAULT; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | addr = g2d_userptr_get_dma_addr(g2d, | 
|  | g2d_userptr.userptr, | 
|  | g2d_userptr.size, | 
|  | file, | 
|  | &buf_info->obj[reg_type]); | 
|  | if (IS_ERR(addr)) { | 
|  | ret = -EFAULT; | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | cmdlist->data[reg_pos + 1] = *addr; | 
|  | buf_info->reg_types[i] = reg_type; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | buf_info->map_nr = i; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void g2d_unmap_cmdlist_gem(struct g2d_data *g2d, | 
|  | struct g2d_cmdlist_node *node, | 
|  | struct drm_file *filp) | 
|  | { | 
|  | struct g2d_buf_info *buf_info = &node->buf_info; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < buf_info->map_nr; i++) { | 
|  | struct g2d_buf_desc *buf_desc; | 
|  | enum g2d_reg_type reg_type; | 
|  | void *obj; | 
|  |  | 
|  | reg_type = buf_info->reg_types[i]; | 
|  |  | 
|  | buf_desc = &buf_info->descs[reg_type]; | 
|  | obj = buf_info->obj[reg_type]; | 
|  |  | 
|  | if (buf_info->types[reg_type] == BUF_TYPE_GEM) | 
|  | exynos_drm_gem_put(obj); | 
|  | else | 
|  | g2d_userptr_put_dma_addr(g2d, obj, false); | 
|  |  | 
|  | buf_info->reg_types[i] = REG_TYPE_NONE; | 
|  | buf_info->obj[reg_type] = NULL; | 
|  | buf_info->types[reg_type] = 0; | 
|  | memset(buf_desc, 0x00, sizeof(*buf_desc)); | 
|  | } | 
|  |  | 
|  | buf_info->map_nr = 0; | 
|  | } | 
|  |  | 
|  | static void g2d_dma_start(struct g2d_data *g2d, | 
|  | struct g2d_runqueue_node *runqueue_node) | 
|  | { | 
|  | struct g2d_cmdlist_node *node = | 
|  | list_first_entry(&runqueue_node->run_cmdlist, | 
|  | struct g2d_cmdlist_node, list); | 
|  |  | 
|  | set_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags); | 
|  | writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR); | 
|  | writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND); | 
|  | } | 
|  |  | 
|  | static struct g2d_runqueue_node *g2d_get_runqueue_node(struct g2d_data *g2d) | 
|  | { | 
|  | struct g2d_runqueue_node *runqueue_node; | 
|  |  | 
|  | if (list_empty(&g2d->runqueue)) | 
|  | return NULL; | 
|  |  | 
|  | runqueue_node = list_first_entry(&g2d->runqueue, | 
|  | struct g2d_runqueue_node, list); | 
|  | list_del_init(&runqueue_node->list); | 
|  | return runqueue_node; | 
|  | } | 
|  |  | 
|  | static void g2d_free_runqueue_node(struct g2d_data *g2d, | 
|  | struct g2d_runqueue_node *runqueue_node) | 
|  | { | 
|  | struct g2d_cmdlist_node *node; | 
|  |  | 
|  | mutex_lock(&g2d->cmdlist_mutex); | 
|  | /* | 
|  | * commands in run_cmdlist have been completed so unmap all gem | 
|  | * objects in each command node so that they are unreferenced. | 
|  | */ | 
|  | list_for_each_entry(node, &runqueue_node->run_cmdlist, list) | 
|  | g2d_unmap_cmdlist_gem(g2d, node, runqueue_node->filp); | 
|  | list_splice_tail_init(&runqueue_node->run_cmdlist, &g2d->free_cmdlist); | 
|  | mutex_unlock(&g2d->cmdlist_mutex); | 
|  |  | 
|  | kmem_cache_free(g2d->runqueue_slab, runqueue_node); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * g2d_remove_runqueue_nodes - remove items from the list of runqueue nodes | 
|  | * @g2d: G2D state object | 
|  | * @file: if not zero, only remove items with this DRM file | 
|  | * | 
|  | * Has to be called under runqueue lock. | 
|  | */ | 
|  | static void g2d_remove_runqueue_nodes(struct g2d_data *g2d, struct drm_file *file) | 
|  | { | 
|  | struct g2d_runqueue_node *node, *n; | 
|  |  | 
|  | if (list_empty(&g2d->runqueue)) | 
|  | return; | 
|  |  | 
|  | list_for_each_entry_safe(node, n, &g2d->runqueue, list) { | 
|  | if (file && node->filp != file) | 
|  | continue; | 
|  |  | 
|  | list_del_init(&node->list); | 
|  | g2d_free_runqueue_node(g2d, node); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void g2d_runqueue_worker(struct work_struct *work) | 
|  | { | 
|  | struct g2d_data *g2d = container_of(work, struct g2d_data, | 
|  | runqueue_work); | 
|  | struct g2d_runqueue_node *runqueue_node; | 
|  |  | 
|  | /* | 
|  | * The engine is busy and the completion of the current node is going | 
|  | * to poke the runqueue worker, so nothing to do here. | 
|  | */ | 
|  | if (test_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&g2d->runqueue_mutex); | 
|  |  | 
|  | runqueue_node = g2d->runqueue_node; | 
|  | g2d->runqueue_node = NULL; | 
|  |  | 
|  | if (runqueue_node) { | 
|  | pm_runtime_mark_last_busy(g2d->dev); | 
|  | pm_runtime_put_autosuspend(g2d->dev); | 
|  |  | 
|  | complete(&runqueue_node->complete); | 
|  | if (runqueue_node->async) | 
|  | g2d_free_runqueue_node(g2d, runqueue_node); | 
|  | } | 
|  |  | 
|  | if (!test_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags)) { | 
|  | g2d->runqueue_node = g2d_get_runqueue_node(g2d); | 
|  |  | 
|  | if (g2d->runqueue_node) { | 
|  | int ret; | 
|  |  | 
|  | ret = pm_runtime_resume_and_get(g2d->dev); | 
|  | if (ret < 0) { | 
|  | dev_err(g2d->dev, "failed to enable G2D device.\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | g2d_dma_start(g2d, g2d->runqueue_node); | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&g2d->runqueue_mutex); | 
|  | } | 
|  |  | 
|  | static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no) | 
|  | { | 
|  | struct drm_device *drm_dev = g2d->drm_dev; | 
|  | struct g2d_runqueue_node *runqueue_node = g2d->runqueue_node; | 
|  | struct drm_exynos_pending_g2d_event *e; | 
|  | struct timespec64 now; | 
|  |  | 
|  | if (list_empty(&runqueue_node->event_list)) | 
|  | return; | 
|  |  | 
|  | e = list_first_entry(&runqueue_node->event_list, | 
|  | struct drm_exynos_pending_g2d_event, base.link); | 
|  |  | 
|  | ktime_get_ts64(&now); | 
|  | e->event.tv_sec = now.tv_sec; | 
|  | e->event.tv_usec = now.tv_nsec / NSEC_PER_USEC; | 
|  | e->event.cmdlist_no = cmdlist_no; | 
|  |  | 
|  | drm_send_event(drm_dev, &e->base); | 
|  | } | 
|  |  | 
|  | static irqreturn_t g2d_irq_handler(int irq, void *dev_id) | 
|  | { | 
|  | struct g2d_data *g2d = dev_id; | 
|  | u32 pending; | 
|  |  | 
|  | pending = readl_relaxed(g2d->regs + G2D_INTC_PEND); | 
|  | if (pending) | 
|  | writel_relaxed(pending, g2d->regs + G2D_INTC_PEND); | 
|  |  | 
|  | if (pending & G2D_INTP_GCMD_FIN) { | 
|  | u32 cmdlist_no = readl_relaxed(g2d->regs + G2D_DMA_STATUS); | 
|  |  | 
|  | cmdlist_no = (cmdlist_no & G2D_DMA_LIST_DONE_COUNT) >> | 
|  | G2D_DMA_LIST_DONE_COUNT_OFFSET; | 
|  |  | 
|  | g2d_finish_event(g2d, cmdlist_no); | 
|  |  | 
|  | writel_relaxed(0, g2d->regs + G2D_DMA_HOLD_CMD); | 
|  | if (!(pending & G2D_INTP_ACMD_FIN)) { | 
|  | writel_relaxed(G2D_DMA_CONTINUE, | 
|  | g2d->regs + G2D_DMA_COMMAND); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (pending & G2D_INTP_ACMD_FIN) { | 
|  | clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags); | 
|  | queue_work(g2d->g2d_workq, &g2d->runqueue_work); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * g2d_wait_finish - wait for the G2D engine to finish the current runqueue node | 
|  | * @g2d: G2D state object | 
|  | * @file: if not zero, only wait if the current runqueue node belongs | 
|  | *        to the DRM file | 
|  | * | 
|  | * Should the engine not become idle after a 100ms timeout, a hardware | 
|  | * reset is issued. | 
|  | */ | 
|  | static void g2d_wait_finish(struct g2d_data *g2d, struct drm_file *file) | 
|  | { | 
|  | struct device *dev = g2d->dev; | 
|  |  | 
|  | struct g2d_runqueue_node *runqueue_node = NULL; | 
|  | unsigned int tries = 10; | 
|  |  | 
|  | mutex_lock(&g2d->runqueue_mutex); | 
|  |  | 
|  | /* If no node is currently processed, we have nothing to do. */ | 
|  | if (!g2d->runqueue_node) | 
|  | goto out; | 
|  |  | 
|  | runqueue_node = g2d->runqueue_node; | 
|  |  | 
|  | /* Check if the currently processed item belongs to us. */ | 
|  | if (file && runqueue_node->filp != file) | 
|  | goto out; | 
|  |  | 
|  | mutex_unlock(&g2d->runqueue_mutex); | 
|  |  | 
|  | /* Wait for the G2D engine to finish. */ | 
|  | while (tries-- && (g2d->runqueue_node == runqueue_node)) | 
|  | mdelay(10); | 
|  |  | 
|  | mutex_lock(&g2d->runqueue_mutex); | 
|  |  | 
|  | if (g2d->runqueue_node != runqueue_node) | 
|  | goto out; | 
|  |  | 
|  | dev_err(dev, "wait timed out, resetting engine...\n"); | 
|  | g2d_hw_reset(g2d); | 
|  |  | 
|  | /* | 
|  | * After the hardware reset of the engine we are going to loose | 
|  | * the IRQ which triggers the PM runtime put(). | 
|  | * So do this manually here. | 
|  | */ | 
|  | pm_runtime_mark_last_busy(dev); | 
|  | pm_runtime_put_autosuspend(dev); | 
|  |  | 
|  | complete(&runqueue_node->complete); | 
|  | if (runqueue_node->async) | 
|  | g2d_free_runqueue_node(g2d, runqueue_node); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&g2d->runqueue_mutex); | 
|  | } | 
|  |  | 
|  | static int g2d_check_reg_offset(struct g2d_data *g2d, | 
|  | struct g2d_cmdlist_node *node, | 
|  | int nr, bool for_addr) | 
|  | { | 
|  | struct g2d_cmdlist *cmdlist = node->cmdlist; | 
|  | int reg_offset; | 
|  | int index; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nr; i++) { | 
|  | struct g2d_buf_info *buf_info = &node->buf_info; | 
|  | struct g2d_buf_desc *buf_desc; | 
|  | enum g2d_reg_type reg_type; | 
|  | unsigned long value; | 
|  |  | 
|  | index = cmdlist->last - 2 * (i + 1); | 
|  |  | 
|  | reg_offset = cmdlist->data[index] & ~0xfffff000; | 
|  | if (reg_offset < G2D_VALID_START || reg_offset > G2D_VALID_END) | 
|  | goto err; | 
|  | if (reg_offset % 4) | 
|  | goto err; | 
|  |  | 
|  | switch (reg_offset) { | 
|  | case G2D_SRC_BASE_ADDR: | 
|  | case G2D_SRC_PLANE2_BASE_ADDR: | 
|  | case G2D_DST_BASE_ADDR: | 
|  | case G2D_DST_PLANE2_BASE_ADDR: | 
|  | case G2D_PAT_BASE_ADDR: | 
|  | case G2D_MSK_BASE_ADDR: | 
|  | if (!for_addr) | 
|  | goto err; | 
|  |  | 
|  | reg_type = g2d_get_reg_type(g2d, reg_offset); | 
|  |  | 
|  | /* check userptr buffer type. */ | 
|  | if ((cmdlist->data[index] & ~0x7fffffff) >> 31) { | 
|  | buf_info->types[reg_type] = BUF_TYPE_USERPTR; | 
|  | cmdlist->data[index] &= ~G2D_BUF_USERPTR; | 
|  | } else | 
|  | buf_info->types[reg_type] = BUF_TYPE_GEM; | 
|  | break; | 
|  | case G2D_SRC_STRIDE: | 
|  | case G2D_DST_STRIDE: | 
|  | if (for_addr) | 
|  | goto err; | 
|  |  | 
|  | reg_type = g2d_get_reg_type(g2d, reg_offset); | 
|  |  | 
|  | buf_desc = &buf_info->descs[reg_type]; | 
|  | buf_desc->stride = cmdlist->data[index + 1]; | 
|  | break; | 
|  | case G2D_SRC_COLOR_MODE: | 
|  | case G2D_DST_COLOR_MODE: | 
|  | if (for_addr) | 
|  | goto err; | 
|  |  | 
|  | reg_type = g2d_get_reg_type(g2d, reg_offset); | 
|  |  | 
|  | buf_desc = &buf_info->descs[reg_type]; | 
|  | value = cmdlist->data[index + 1]; | 
|  |  | 
|  | buf_desc->format = value & 0xf; | 
|  | break; | 
|  | case G2D_SRC_LEFT_TOP: | 
|  | case G2D_DST_LEFT_TOP: | 
|  | if (for_addr) | 
|  | goto err; | 
|  |  | 
|  | reg_type = g2d_get_reg_type(g2d, reg_offset); | 
|  |  | 
|  | buf_desc = &buf_info->descs[reg_type]; | 
|  | value = cmdlist->data[index + 1]; | 
|  |  | 
|  | buf_desc->left_x = value & 0x1fff; | 
|  | buf_desc->top_y = (value & 0x1fff0000) >> 16; | 
|  | break; | 
|  | case G2D_SRC_RIGHT_BOTTOM: | 
|  | case G2D_DST_RIGHT_BOTTOM: | 
|  | if (for_addr) | 
|  | goto err; | 
|  |  | 
|  | reg_type = g2d_get_reg_type(g2d, reg_offset); | 
|  |  | 
|  | buf_desc = &buf_info->descs[reg_type]; | 
|  | value = cmdlist->data[index + 1]; | 
|  |  | 
|  | buf_desc->right_x = value & 0x1fff; | 
|  | buf_desc->bottom_y = (value & 0x1fff0000) >> 16; | 
|  | break; | 
|  | default: | 
|  | if (for_addr) | 
|  | goto err; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | dev_err(g2d->dev, "Bad register offset: 0x%lx\n", cmdlist->data[index]); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* ioctl functions */ | 
|  | int exynos_g2d_get_ver_ioctl(struct drm_device *drm_dev, void *data, | 
|  | struct drm_file *file) | 
|  | { | 
|  | struct drm_exynos_g2d_get_ver *ver = data; | 
|  |  | 
|  | ver->major = G2D_HW_MAJOR_VER; | 
|  | ver->minor = G2D_HW_MINOR_VER; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int exynos_g2d_set_cmdlist_ioctl(struct drm_device *drm_dev, void *data, | 
|  | struct drm_file *file) | 
|  | { | 
|  | struct drm_exynos_file_private *file_priv = file->driver_priv; | 
|  | struct exynos_drm_private *priv = drm_dev->dev_private; | 
|  | struct g2d_data *g2d = dev_get_drvdata(priv->g2d_dev); | 
|  | struct drm_exynos_g2d_set_cmdlist *req = data; | 
|  | struct drm_exynos_g2d_cmd *cmd; | 
|  | struct drm_exynos_pending_g2d_event *e; | 
|  | struct g2d_cmdlist_node *node; | 
|  | struct g2d_cmdlist *cmdlist; | 
|  | int size; | 
|  | int ret; | 
|  |  | 
|  | node = g2d_get_cmdlist(g2d); | 
|  | if (!node) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* | 
|  | * To avoid an integer overflow for the later size computations, we | 
|  | * enforce a maximum number of submitted commands here. This limit is | 
|  | * sufficient for all conceivable usage cases of the G2D. | 
|  | */ | 
|  | if (req->cmd_nr > G2D_CMDLIST_DATA_NUM || | 
|  | req->cmd_buf_nr > G2D_CMDLIST_DATA_NUM) { | 
|  | dev_err(g2d->dev, "number of submitted G2D commands exceeds limit\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | node->event = NULL; | 
|  |  | 
|  | if (req->event_type != G2D_EVENT_NOT) { | 
|  | e = kzalloc(sizeof(*node->event), GFP_KERNEL); | 
|  | if (!e) { | 
|  | ret = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | e->event.base.type = DRM_EXYNOS_G2D_EVENT; | 
|  | e->event.base.length = sizeof(e->event); | 
|  | e->event.user_data = req->user_data; | 
|  |  | 
|  | ret = drm_event_reserve_init(drm_dev, file, &e->base, &e->event.base); | 
|  | if (ret) { | 
|  | kfree(e); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | node->event = e; | 
|  | } | 
|  |  | 
|  | cmdlist = node->cmdlist; | 
|  |  | 
|  | cmdlist->last = 0; | 
|  |  | 
|  | /* | 
|  | * If don't clear SFR registers, the cmdlist is affected by register | 
|  | * values of previous cmdlist. G2D hw executes SFR clear command and | 
|  | * a next command at the same time then the next command is ignored and | 
|  | * is executed rightly from next next command, so needs a dummy command | 
|  | * to next command of SFR clear command. | 
|  | */ | 
|  | cmdlist->data[cmdlist->last++] = G2D_SOFT_RESET; | 
|  | cmdlist->data[cmdlist->last++] = G2D_SFRCLEAR; | 
|  | cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR; | 
|  | cmdlist->data[cmdlist->last++] = 0; | 
|  |  | 
|  | /* | 
|  | * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG | 
|  | * and GCF bit should be set to INTEN register if user wants | 
|  | * G2D interrupt event once current command list execution is | 
|  | * finished. | 
|  | * Otherwise only ACF bit should be set to INTEN register so | 
|  | * that one interrupt is occurred after all command lists | 
|  | * have been completed. | 
|  | */ | 
|  | if (node->event) { | 
|  | cmdlist->data[cmdlist->last++] = G2D_INTEN; | 
|  | cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF; | 
|  | cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD; | 
|  | cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD; | 
|  | } else { | 
|  | cmdlist->data[cmdlist->last++] = G2D_INTEN; | 
|  | cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check the size of cmdlist. The 2 that is added last comes from | 
|  | * the implicit G2D_BITBLT_START that is appended once we have | 
|  | * checked all the submitted commands. | 
|  | */ | 
|  | size = cmdlist->last + req->cmd_nr * 2 + req->cmd_buf_nr * 2 + 2; | 
|  | if (size > G2D_CMDLIST_DATA_NUM) { | 
|  | dev_err(g2d->dev, "cmdlist size is too big\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_free_event; | 
|  | } | 
|  |  | 
|  | cmd = (struct drm_exynos_g2d_cmd *)(unsigned long)req->cmd; | 
|  |  | 
|  | if (copy_from_user(cmdlist->data + cmdlist->last, | 
|  | (void __user *)cmd, | 
|  | sizeof(*cmd) * req->cmd_nr)) { | 
|  | ret = -EFAULT; | 
|  | goto err_free_event; | 
|  | } | 
|  | cmdlist->last += req->cmd_nr * 2; | 
|  |  | 
|  | ret = g2d_check_reg_offset(g2d, node, req->cmd_nr, false); | 
|  | if (ret < 0) | 
|  | goto err_free_event; | 
|  |  | 
|  | node->buf_info.map_nr = req->cmd_buf_nr; | 
|  | if (req->cmd_buf_nr) { | 
|  | struct drm_exynos_g2d_cmd *cmd_buf; | 
|  |  | 
|  | cmd_buf = (struct drm_exynos_g2d_cmd *) | 
|  | (unsigned long)req->cmd_buf; | 
|  |  | 
|  | if (copy_from_user(cmdlist->data + cmdlist->last, | 
|  | (void __user *)cmd_buf, | 
|  | sizeof(*cmd_buf) * req->cmd_buf_nr)) { | 
|  | ret = -EFAULT; | 
|  | goto err_free_event; | 
|  | } | 
|  | cmdlist->last += req->cmd_buf_nr * 2; | 
|  |  | 
|  | ret = g2d_check_reg_offset(g2d, node, req->cmd_buf_nr, true); | 
|  | if (ret < 0) | 
|  | goto err_free_event; | 
|  |  | 
|  | ret = g2d_map_cmdlist_gem(g2d, node, drm_dev, file); | 
|  | if (ret < 0) | 
|  | goto err_unmap; | 
|  | } | 
|  |  | 
|  | cmdlist->data[cmdlist->last++] = G2D_BITBLT_START; | 
|  | cmdlist->data[cmdlist->last++] = G2D_START_BITBLT; | 
|  |  | 
|  | /* head */ | 
|  | cmdlist->head = cmdlist->last / 2; | 
|  |  | 
|  | /* tail */ | 
|  | cmdlist->data[cmdlist->last] = 0; | 
|  |  | 
|  | g2d_add_cmdlist_to_inuse(file_priv, node); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_unmap: | 
|  | g2d_unmap_cmdlist_gem(g2d, node, file); | 
|  | err_free_event: | 
|  | if (node->event) | 
|  | drm_event_cancel_free(drm_dev, &node->event->base); | 
|  | err: | 
|  | g2d_put_cmdlist(g2d, node); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data, | 
|  | struct drm_file *file) | 
|  | { | 
|  | struct drm_exynos_file_private *file_priv = file->driver_priv; | 
|  | struct exynos_drm_private *priv = drm_dev->dev_private; | 
|  | struct g2d_data *g2d = dev_get_drvdata(priv->g2d_dev); | 
|  | struct drm_exynos_g2d_exec *req = data; | 
|  | struct g2d_runqueue_node *runqueue_node; | 
|  | struct list_head *run_cmdlist; | 
|  | struct list_head *event_list; | 
|  |  | 
|  | runqueue_node = kmem_cache_alloc(g2d->runqueue_slab, GFP_KERNEL); | 
|  | if (!runqueue_node) | 
|  | return -ENOMEM; | 
|  |  | 
|  | run_cmdlist = &runqueue_node->run_cmdlist; | 
|  | event_list = &runqueue_node->event_list; | 
|  | INIT_LIST_HEAD(run_cmdlist); | 
|  | INIT_LIST_HEAD(event_list); | 
|  | init_completion(&runqueue_node->complete); | 
|  | runqueue_node->async = req->async; | 
|  |  | 
|  | list_splice_init(&file_priv->inuse_cmdlist, run_cmdlist); | 
|  | list_splice_init(&file_priv->event_list, event_list); | 
|  |  | 
|  | if (list_empty(run_cmdlist)) { | 
|  | dev_err(g2d->dev, "there is no inuse cmdlist\n"); | 
|  | kmem_cache_free(g2d->runqueue_slab, runqueue_node); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | mutex_lock(&g2d->runqueue_mutex); | 
|  | runqueue_node->pid = current->pid; | 
|  | runqueue_node->filp = file; | 
|  | list_add_tail(&runqueue_node->list, &g2d->runqueue); | 
|  | mutex_unlock(&g2d->runqueue_mutex); | 
|  |  | 
|  | /* Let the runqueue know that there is work to do. */ | 
|  | queue_work(g2d->g2d_workq, &g2d->runqueue_work); | 
|  |  | 
|  | if (runqueue_node->async) | 
|  | goto out; | 
|  |  | 
|  | wait_for_completion(&runqueue_node->complete); | 
|  | g2d_free_runqueue_node(g2d, runqueue_node); | 
|  |  | 
|  | out: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int g2d_open(struct drm_device *drm_dev, struct drm_file *file) | 
|  | { | 
|  | struct drm_exynos_file_private *file_priv = file->driver_priv; | 
|  |  | 
|  | INIT_LIST_HEAD(&file_priv->inuse_cmdlist); | 
|  | INIT_LIST_HEAD(&file_priv->event_list); | 
|  | INIT_LIST_HEAD(&file_priv->userptr_list); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void g2d_close(struct drm_device *drm_dev, struct drm_file *file) | 
|  | { | 
|  | struct drm_exynos_file_private *file_priv = file->driver_priv; | 
|  | struct exynos_drm_private *priv = drm_dev->dev_private; | 
|  | struct g2d_data *g2d; | 
|  | struct g2d_cmdlist_node *node, *n; | 
|  |  | 
|  | if (!priv->g2d_dev) | 
|  | return; | 
|  |  | 
|  | g2d = dev_get_drvdata(priv->g2d_dev); | 
|  |  | 
|  | /* Remove the runqueue nodes that belong to us. */ | 
|  | mutex_lock(&g2d->runqueue_mutex); | 
|  | g2d_remove_runqueue_nodes(g2d, file); | 
|  | mutex_unlock(&g2d->runqueue_mutex); | 
|  |  | 
|  | /* | 
|  | * Wait for the runqueue worker to finish its current node. | 
|  | * After this the engine should no longer be accessing any | 
|  | * memory belonging to us. | 
|  | */ | 
|  | g2d_wait_finish(g2d, file); | 
|  |  | 
|  | /* | 
|  | * Even after the engine is idle, there might still be stale cmdlists | 
|  | * (i.e. cmdlisst which we submitted but never executed) around, with | 
|  | * their corresponding GEM/userptr buffers. | 
|  | * Properly unmap these buffers here. | 
|  | */ | 
|  | mutex_lock(&g2d->cmdlist_mutex); | 
|  | list_for_each_entry_safe(node, n, &file_priv->inuse_cmdlist, list) { | 
|  | g2d_unmap_cmdlist_gem(g2d, node, file); | 
|  | list_move_tail(&node->list, &g2d->free_cmdlist); | 
|  | } | 
|  | mutex_unlock(&g2d->cmdlist_mutex); | 
|  |  | 
|  | /* release all g2d_userptr in pool. */ | 
|  | g2d_userptr_free_all(g2d, file); | 
|  | } | 
|  |  | 
|  | static int g2d_bind(struct device *dev, struct device *master, void *data) | 
|  | { | 
|  | struct g2d_data *g2d = dev_get_drvdata(dev); | 
|  | struct drm_device *drm_dev = data; | 
|  | struct exynos_drm_private *priv = drm_dev->dev_private; | 
|  | int ret; | 
|  |  | 
|  | g2d->drm_dev = drm_dev; | 
|  |  | 
|  | /* allocate dma-aware cmdlist buffer. */ | 
|  | ret = g2d_init_cmdlist(g2d); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "cmdlist init failed\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = exynos_drm_register_dma(drm_dev, dev, &g2d->dma_priv); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to enable iommu.\n"); | 
|  | g2d_fini_cmdlist(g2d); | 
|  | return ret; | 
|  | } | 
|  | priv->g2d_dev = dev; | 
|  |  | 
|  | dev_info(dev, "The Exynos G2D (ver %d.%d) successfully registered.\n", | 
|  | G2D_HW_MAJOR_VER, G2D_HW_MINOR_VER); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void g2d_unbind(struct device *dev, struct device *master, void *data) | 
|  | { | 
|  | struct g2d_data *g2d = dev_get_drvdata(dev); | 
|  | struct drm_device *drm_dev = data; | 
|  | struct exynos_drm_private *priv = drm_dev->dev_private; | 
|  |  | 
|  | /* Suspend operation and wait for engine idle. */ | 
|  | set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags); | 
|  | g2d_wait_finish(g2d, NULL); | 
|  | priv->g2d_dev = NULL; | 
|  |  | 
|  | cancel_work_sync(&g2d->runqueue_work); | 
|  | exynos_drm_unregister_dma(g2d->drm_dev, dev, &g2d->dma_priv); | 
|  | } | 
|  |  | 
|  | static const struct component_ops g2d_component_ops = { | 
|  | .bind	= g2d_bind, | 
|  | .unbind = g2d_unbind, | 
|  | }; | 
|  |  | 
|  | static int g2d_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct g2d_data *g2d; | 
|  | int ret; | 
|  |  | 
|  | g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL); | 
|  | if (!g2d) | 
|  | return -ENOMEM; | 
|  |  | 
|  | g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab", | 
|  | sizeof(struct g2d_runqueue_node), 0, 0, NULL); | 
|  | if (!g2d->runqueue_slab) | 
|  | return -ENOMEM; | 
|  |  | 
|  | g2d->dev = dev; | 
|  |  | 
|  | g2d->g2d_workq = create_singlethread_workqueue("g2d"); | 
|  | if (!g2d->g2d_workq) { | 
|  | dev_err(dev, "failed to create workqueue\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_destroy_slab; | 
|  | } | 
|  |  | 
|  | INIT_WORK(&g2d->runqueue_work, g2d_runqueue_worker); | 
|  | INIT_LIST_HEAD(&g2d->free_cmdlist); | 
|  | INIT_LIST_HEAD(&g2d->runqueue); | 
|  |  | 
|  | mutex_init(&g2d->cmdlist_mutex); | 
|  | mutex_init(&g2d->runqueue_mutex); | 
|  |  | 
|  | g2d->gate_clk = devm_clk_get(dev, "fimg2d"); | 
|  | if (IS_ERR(g2d->gate_clk)) { | 
|  | dev_err(dev, "failed to get gate clock\n"); | 
|  | ret = PTR_ERR(g2d->gate_clk); | 
|  | goto err_destroy_workqueue; | 
|  | } | 
|  |  | 
|  | pm_runtime_use_autosuspend(dev); | 
|  | pm_runtime_set_autosuspend_delay(dev, 2000); | 
|  | pm_runtime_enable(dev); | 
|  | clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags); | 
|  | clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags); | 
|  |  | 
|  | g2d->regs = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(g2d->regs)) { | 
|  | ret = PTR_ERR(g2d->regs); | 
|  | goto err_put_clk; | 
|  | } | 
|  |  | 
|  | g2d->irq = platform_get_irq(pdev, 0); | 
|  | if (g2d->irq < 0) { | 
|  | ret = g2d->irq; | 
|  | goto err_put_clk; | 
|  | } | 
|  |  | 
|  | ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0, | 
|  | "drm_g2d", g2d); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "irq request failed\n"); | 
|  | goto err_put_clk; | 
|  | } | 
|  |  | 
|  | g2d->max_pool = MAX_POOL; | 
|  |  | 
|  | platform_set_drvdata(pdev, g2d); | 
|  |  | 
|  | ret = component_add(dev, &g2d_component_ops); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to register drm g2d device\n"); | 
|  | goto err_put_clk; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_put_clk: | 
|  | pm_runtime_disable(dev); | 
|  | err_destroy_workqueue: | 
|  | destroy_workqueue(g2d->g2d_workq); | 
|  | err_destroy_slab: | 
|  | kmem_cache_destroy(g2d->runqueue_slab); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int g2d_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct g2d_data *g2d = platform_get_drvdata(pdev); | 
|  |  | 
|  | component_del(&pdev->dev, &g2d_component_ops); | 
|  |  | 
|  | /* There should be no locking needed here. */ | 
|  | g2d_remove_runqueue_nodes(g2d, NULL); | 
|  |  | 
|  | pm_runtime_dont_use_autosuspend(&pdev->dev); | 
|  | pm_runtime_disable(&pdev->dev); | 
|  |  | 
|  | g2d_fini_cmdlist(g2d); | 
|  | destroy_workqueue(g2d->g2d_workq); | 
|  | kmem_cache_destroy(g2d->runqueue_slab); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int g2d_suspend(struct device *dev) | 
|  | { | 
|  | struct g2d_data *g2d = dev_get_drvdata(dev); | 
|  |  | 
|  | /* | 
|  | * Suspend the runqueue worker operation and wait until the G2D | 
|  | * engine is idle. | 
|  | */ | 
|  | set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags); | 
|  | g2d_wait_finish(g2d, NULL); | 
|  | flush_work(&g2d->runqueue_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int g2d_resume(struct device *dev) | 
|  | { | 
|  | struct g2d_data *g2d = dev_get_drvdata(dev); | 
|  |  | 
|  | clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags); | 
|  | queue_work(g2d->g2d_workq, &g2d->runqueue_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int g2d_runtime_suspend(struct device *dev) | 
|  | { | 
|  | struct g2d_data *g2d = dev_get_drvdata(dev); | 
|  |  | 
|  | clk_disable_unprepare(g2d->gate_clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int g2d_runtime_resume(struct device *dev) | 
|  | { | 
|  | struct g2d_data *g2d = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = clk_prepare_enable(g2d->gate_clk); | 
|  | if (ret < 0) | 
|  | dev_warn(dev, "failed to enable clock.\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static const struct dev_pm_ops g2d_pm_ops = { | 
|  | SET_SYSTEM_SLEEP_PM_OPS(g2d_suspend, g2d_resume) | 
|  | SET_RUNTIME_PM_OPS(g2d_runtime_suspend, g2d_runtime_resume, NULL) | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id exynos_g2d_match[] = { | 
|  | { .compatible = "samsung,exynos5250-g2d" }, | 
|  | { .compatible = "samsung,exynos4212-g2d" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, exynos_g2d_match); | 
|  |  | 
|  | struct platform_driver g2d_driver = { | 
|  | .probe		= g2d_probe, | 
|  | .remove		= g2d_remove, | 
|  | .driver		= { | 
|  | .name	= "exynos-drm-g2d", | 
|  | .owner	= THIS_MODULE, | 
|  | .pm	= &g2d_pm_ops, | 
|  | .of_match_table = exynos_g2d_match, | 
|  | }, | 
|  | }; |