|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * | 
|  | *  Bluetooth HCI Three-wire UART driver | 
|  | * | 
|  | *  Copyright (C) 2012  Intel Corporation | 
|  | */ | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mod_devicetable.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/serdev.h> | 
|  | #include <linux/skbuff.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  |  | 
|  | #include "btrtl.h" | 
|  | #include "hci_uart.h" | 
|  |  | 
|  | #define SUSPEND_TIMEOUT_MS	6000 | 
|  |  | 
|  | #define HCI_3WIRE_ACK_PKT	0 | 
|  | #define HCI_3WIRE_LINK_PKT	15 | 
|  |  | 
|  | /* Sliding window size */ | 
|  | #define H5_TX_WIN_MAX		4 | 
|  |  | 
|  | #define H5_ACK_TIMEOUT	msecs_to_jiffies(250) | 
|  | #define H5_SYNC_TIMEOUT	msecs_to_jiffies(100) | 
|  |  | 
|  | /* | 
|  | * Maximum Three-wire packet: | 
|  | *     4 byte header + max value for 12-bit length + 2 bytes for CRC | 
|  | */ | 
|  | #define H5_MAX_LEN (4 + 0xfff + 2) | 
|  |  | 
|  | /* Convenience macros for reading Three-wire header values */ | 
|  | #define H5_HDR_SEQ(hdr)		((hdr)[0] & 0x07) | 
|  | #define H5_HDR_ACK(hdr)		(((hdr)[0] >> 3) & 0x07) | 
|  | #define H5_HDR_CRC(hdr)		(((hdr)[0] >> 6) & 0x01) | 
|  | #define H5_HDR_RELIABLE(hdr)	(((hdr)[0] >> 7) & 0x01) | 
|  | #define H5_HDR_PKT_TYPE(hdr)	((hdr)[1] & 0x0f) | 
|  | #define H5_HDR_LEN(hdr)		((((hdr)[1] >> 4) & 0x0f) + ((hdr)[2] << 4)) | 
|  |  | 
|  | #define SLIP_DELIMITER	0xc0 | 
|  | #define SLIP_ESC	0xdb | 
|  | #define SLIP_ESC_DELIM	0xdc | 
|  | #define SLIP_ESC_ESC	0xdd | 
|  |  | 
|  | /* H5 state flags */ | 
|  | enum { | 
|  | H5_RX_ESC,		/* SLIP escape mode */ | 
|  | H5_TX_ACK_REQ,		/* Pending ack to send */ | 
|  | H5_WAKEUP_DISABLE,	/* Device cannot wake host */ | 
|  | H5_HW_FLOW_CONTROL,	/* Use HW flow control */ | 
|  | }; | 
|  |  | 
|  | struct h5 { | 
|  | /* Must be the first member, hci_serdev.c expects this. */ | 
|  | struct hci_uart		serdev_hu; | 
|  |  | 
|  | struct sk_buff_head	unack;		/* Unack'ed packets queue */ | 
|  | struct sk_buff_head	rel;		/* Reliable packets queue */ | 
|  | struct sk_buff_head	unrel;		/* Unreliable packets queue */ | 
|  |  | 
|  | unsigned long		flags; | 
|  |  | 
|  | struct sk_buff		*rx_skb;	/* Receive buffer */ | 
|  | size_t			rx_pending;	/* Expecting more bytes */ | 
|  | u8			rx_ack;		/* Last ack number received */ | 
|  |  | 
|  | int			(*rx_func)(struct hci_uart *hu, u8 c); | 
|  |  | 
|  | struct timer_list	timer;		/* Retransmission timer */ | 
|  | struct hci_uart		*hu;		/* Parent HCI UART */ | 
|  |  | 
|  | u8			tx_seq;		/* Next seq number to send */ | 
|  | u8			tx_ack;		/* Next ack number to send */ | 
|  | u8			tx_win;		/* Sliding window size */ | 
|  |  | 
|  | enum { | 
|  | H5_UNINITIALIZED, | 
|  | H5_INITIALIZED, | 
|  | H5_ACTIVE, | 
|  | } state; | 
|  |  | 
|  | enum { | 
|  | H5_AWAKE, | 
|  | H5_SLEEPING, | 
|  | H5_WAKING_UP, | 
|  | } sleep; | 
|  |  | 
|  | const struct h5_vnd *vnd; | 
|  | const char *id; | 
|  |  | 
|  | struct gpio_desc *enable_gpio; | 
|  | struct gpio_desc *device_wake_gpio; | 
|  | }; | 
|  |  | 
|  | enum h5_driver_info { | 
|  | H5_INFO_WAKEUP_DISABLE = BIT(0), | 
|  | }; | 
|  |  | 
|  | struct h5_vnd { | 
|  | int (*setup)(struct h5 *h5); | 
|  | void (*open)(struct h5 *h5); | 
|  | void (*close)(struct h5 *h5); | 
|  | int (*suspend)(struct h5 *h5); | 
|  | int (*resume)(struct h5 *h5); | 
|  | const struct acpi_gpio_mapping *acpi_gpio_map; | 
|  | }; | 
|  |  | 
|  | struct h5_device_data { | 
|  | uint32_t driver_info; | 
|  | struct h5_vnd *vnd; | 
|  | }; | 
|  |  | 
|  | static void h5_reset_rx(struct h5 *h5); | 
|  |  | 
|  | static void h5_link_control(struct hci_uart *hu, const void *data, size_t len) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | struct sk_buff *nskb; | 
|  |  | 
|  | nskb = alloc_skb(3, GFP_ATOMIC); | 
|  | if (!nskb) | 
|  | return; | 
|  |  | 
|  | hci_skb_pkt_type(nskb) = HCI_3WIRE_LINK_PKT; | 
|  |  | 
|  | skb_put_data(nskb, data, len); | 
|  |  | 
|  | skb_queue_tail(&h5->unrel, nskb); | 
|  | } | 
|  |  | 
|  | static u8 h5_cfg_field(struct h5 *h5) | 
|  | { | 
|  | /* Sliding window size (first 3 bits) */ | 
|  | return h5->tx_win & 0x07; | 
|  | } | 
|  |  | 
|  | static void h5_timed_event(struct timer_list *t) | 
|  | { | 
|  | const unsigned char sync_req[] = { 0x01, 0x7e }; | 
|  | unsigned char conf_req[3] = { 0x03, 0xfc }; | 
|  | struct h5 *h5 = from_timer(h5, t, timer); | 
|  | struct hci_uart *hu = h5->hu; | 
|  | struct sk_buff *skb; | 
|  | unsigned long flags; | 
|  |  | 
|  | BT_DBG("%s", hu->hdev->name); | 
|  |  | 
|  | if (h5->state == H5_UNINITIALIZED) | 
|  | h5_link_control(hu, sync_req, sizeof(sync_req)); | 
|  |  | 
|  | if (h5->state == H5_INITIALIZED) { | 
|  | conf_req[2] = h5_cfg_field(h5); | 
|  | h5_link_control(hu, conf_req, sizeof(conf_req)); | 
|  | } | 
|  |  | 
|  | if (h5->state != H5_ACTIVE) { | 
|  | mod_timer(&h5->timer, jiffies + H5_SYNC_TIMEOUT); | 
|  | goto wakeup; | 
|  | } | 
|  |  | 
|  | if (h5->sleep != H5_AWAKE) { | 
|  | h5->sleep = H5_SLEEPING; | 
|  | goto wakeup; | 
|  | } | 
|  |  | 
|  | BT_DBG("hu %p retransmitting %u pkts", hu, h5->unack.qlen); | 
|  |  | 
|  | spin_lock_irqsave_nested(&h5->unack.lock, flags, SINGLE_DEPTH_NESTING); | 
|  |  | 
|  | while ((skb = __skb_dequeue_tail(&h5->unack)) != NULL) { | 
|  | h5->tx_seq = (h5->tx_seq - 1) & 0x07; | 
|  | skb_queue_head(&h5->rel, skb); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&h5->unack.lock, flags); | 
|  |  | 
|  | wakeup: | 
|  | hci_uart_tx_wakeup(hu); | 
|  | } | 
|  |  | 
|  | static void h5_peer_reset(struct hci_uart *hu) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  |  | 
|  | bt_dev_err(hu->hdev, "Peer device has reset"); | 
|  |  | 
|  | h5->state = H5_UNINITIALIZED; | 
|  |  | 
|  | del_timer(&h5->timer); | 
|  |  | 
|  | skb_queue_purge(&h5->rel); | 
|  | skb_queue_purge(&h5->unrel); | 
|  | skb_queue_purge(&h5->unack); | 
|  |  | 
|  | h5->tx_seq = 0; | 
|  | h5->tx_ack = 0; | 
|  |  | 
|  | /* Send reset request to upper stack */ | 
|  | hci_reset_dev(hu->hdev); | 
|  | } | 
|  |  | 
|  | static int h5_open(struct hci_uart *hu) | 
|  | { | 
|  | struct h5 *h5; | 
|  | const unsigned char sync[] = { 0x01, 0x7e }; | 
|  |  | 
|  | BT_DBG("hu %p", hu); | 
|  |  | 
|  | if (hu->serdev) { | 
|  | h5 = serdev_device_get_drvdata(hu->serdev); | 
|  | } else { | 
|  | h5 = kzalloc(sizeof(*h5), GFP_KERNEL); | 
|  | if (!h5) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | hu->priv = h5; | 
|  | h5->hu = hu; | 
|  |  | 
|  | skb_queue_head_init(&h5->unack); | 
|  | skb_queue_head_init(&h5->rel); | 
|  | skb_queue_head_init(&h5->unrel); | 
|  |  | 
|  | h5_reset_rx(h5); | 
|  |  | 
|  | timer_setup(&h5->timer, h5_timed_event, 0); | 
|  |  | 
|  | h5->tx_win = H5_TX_WIN_MAX; | 
|  |  | 
|  | if (h5->vnd && h5->vnd->open) | 
|  | h5->vnd->open(h5); | 
|  |  | 
|  | set_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags); | 
|  |  | 
|  | /* Send initial sync request */ | 
|  | h5_link_control(hu, sync, sizeof(sync)); | 
|  | mod_timer(&h5->timer, jiffies + H5_SYNC_TIMEOUT); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int h5_close(struct hci_uart *hu) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  |  | 
|  | del_timer_sync(&h5->timer); | 
|  |  | 
|  | skb_queue_purge(&h5->unack); | 
|  | skb_queue_purge(&h5->rel); | 
|  | skb_queue_purge(&h5->unrel); | 
|  |  | 
|  | kfree_skb(h5->rx_skb); | 
|  | h5->rx_skb = NULL; | 
|  |  | 
|  | if (h5->vnd && h5->vnd->close) | 
|  | h5->vnd->close(h5); | 
|  |  | 
|  | if (!hu->serdev) | 
|  | kfree(h5); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int h5_setup(struct hci_uart *hu) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  |  | 
|  | if (h5->vnd && h5->vnd->setup) | 
|  | return h5->vnd->setup(h5); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void h5_pkt_cull(struct h5 *h5) | 
|  | { | 
|  | struct sk_buff *skb, *tmp; | 
|  | unsigned long flags; | 
|  | int i, to_remove; | 
|  | u8 seq; | 
|  |  | 
|  | spin_lock_irqsave(&h5->unack.lock, flags); | 
|  |  | 
|  | to_remove = skb_queue_len(&h5->unack); | 
|  | if (to_remove == 0) | 
|  | goto unlock; | 
|  |  | 
|  | seq = h5->tx_seq; | 
|  |  | 
|  | while (to_remove > 0) { | 
|  | if (h5->rx_ack == seq) | 
|  | break; | 
|  |  | 
|  | to_remove--; | 
|  | seq = (seq - 1) & 0x07; | 
|  | } | 
|  |  | 
|  | if (seq != h5->rx_ack) | 
|  | BT_ERR("Controller acked invalid packet"); | 
|  |  | 
|  | i = 0; | 
|  | skb_queue_walk_safe(&h5->unack, skb, tmp) { | 
|  | if (i++ >= to_remove) | 
|  | break; | 
|  |  | 
|  | __skb_unlink(skb, &h5->unack); | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | if (skb_queue_empty(&h5->unack)) | 
|  | del_timer(&h5->timer); | 
|  |  | 
|  | unlock: | 
|  | spin_unlock_irqrestore(&h5->unack.lock, flags); | 
|  | } | 
|  |  | 
|  | static void h5_handle_internal_rx(struct hci_uart *hu) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | const unsigned char sync_req[] = { 0x01, 0x7e }; | 
|  | const unsigned char sync_rsp[] = { 0x02, 0x7d }; | 
|  | unsigned char conf_req[3] = { 0x03, 0xfc }; | 
|  | const unsigned char conf_rsp[] = { 0x04, 0x7b }; | 
|  | const unsigned char wakeup_req[] = { 0x05, 0xfa }; | 
|  | const unsigned char woken_req[] = { 0x06, 0xf9 }; | 
|  | const unsigned char sleep_req[] = { 0x07, 0x78 }; | 
|  | const unsigned char *hdr = h5->rx_skb->data; | 
|  | const unsigned char *data = &h5->rx_skb->data[4]; | 
|  |  | 
|  | BT_DBG("%s", hu->hdev->name); | 
|  |  | 
|  | if (H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) | 
|  | return; | 
|  |  | 
|  | if (H5_HDR_LEN(hdr) < 2) | 
|  | return; | 
|  |  | 
|  | conf_req[2] = h5_cfg_field(h5); | 
|  |  | 
|  | if (memcmp(data, sync_req, 2) == 0) { | 
|  | if (h5->state == H5_ACTIVE) | 
|  | h5_peer_reset(hu); | 
|  | h5_link_control(hu, sync_rsp, 2); | 
|  | } else if (memcmp(data, sync_rsp, 2) == 0) { | 
|  | if (h5->state == H5_ACTIVE) | 
|  | h5_peer_reset(hu); | 
|  | h5->state = H5_INITIALIZED; | 
|  | h5_link_control(hu, conf_req, 3); | 
|  | } else if (memcmp(data, conf_req, 2) == 0) { | 
|  | h5_link_control(hu, conf_rsp, 2); | 
|  | h5_link_control(hu, conf_req, 3); | 
|  | } else if (memcmp(data, conf_rsp, 2) == 0) { | 
|  | if (H5_HDR_LEN(hdr) > 2) | 
|  | h5->tx_win = (data[2] & 0x07); | 
|  | BT_DBG("Three-wire init complete. tx_win %u", h5->tx_win); | 
|  | h5->state = H5_ACTIVE; | 
|  | hci_uart_init_ready(hu); | 
|  | return; | 
|  | } else if (memcmp(data, sleep_req, 2) == 0) { | 
|  | BT_DBG("Peer went to sleep"); | 
|  | h5->sleep = H5_SLEEPING; | 
|  | return; | 
|  | } else if (memcmp(data, woken_req, 2) == 0) { | 
|  | BT_DBG("Peer woke up"); | 
|  | h5->sleep = H5_AWAKE; | 
|  | } else if (memcmp(data, wakeup_req, 2) == 0) { | 
|  | BT_DBG("Peer requested wakeup"); | 
|  | h5_link_control(hu, woken_req, 2); | 
|  | h5->sleep = H5_AWAKE; | 
|  | } else { | 
|  | BT_DBG("Link Control: 0x%02hhx 0x%02hhx", data[0], data[1]); | 
|  | return; | 
|  | } | 
|  |  | 
|  | hci_uart_tx_wakeup(hu); | 
|  | } | 
|  |  | 
|  | static void h5_complete_rx_pkt(struct hci_uart *hu) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | const unsigned char *hdr = h5->rx_skb->data; | 
|  |  | 
|  | if (H5_HDR_RELIABLE(hdr)) { | 
|  | h5->tx_ack = (h5->tx_ack + 1) % 8; | 
|  | set_bit(H5_TX_ACK_REQ, &h5->flags); | 
|  | hci_uart_tx_wakeup(hu); | 
|  | } | 
|  |  | 
|  | h5->rx_ack = H5_HDR_ACK(hdr); | 
|  |  | 
|  | h5_pkt_cull(h5); | 
|  |  | 
|  | switch (H5_HDR_PKT_TYPE(hdr)) { | 
|  | case HCI_EVENT_PKT: | 
|  | case HCI_ACLDATA_PKT: | 
|  | case HCI_SCODATA_PKT: | 
|  | case HCI_ISODATA_PKT: | 
|  | hci_skb_pkt_type(h5->rx_skb) = H5_HDR_PKT_TYPE(hdr); | 
|  |  | 
|  | /* Remove Three-wire header */ | 
|  | skb_pull(h5->rx_skb, 4); | 
|  |  | 
|  | hci_recv_frame(hu->hdev, h5->rx_skb); | 
|  | h5->rx_skb = NULL; | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | h5_handle_internal_rx(hu); | 
|  | break; | 
|  | } | 
|  |  | 
|  | h5_reset_rx(h5); | 
|  | } | 
|  |  | 
|  | static int h5_rx_crc(struct hci_uart *hu, unsigned char c) | 
|  | { | 
|  | h5_complete_rx_pkt(hu); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int h5_rx_payload(struct hci_uart *hu, unsigned char c) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | const unsigned char *hdr = h5->rx_skb->data; | 
|  |  | 
|  | if (H5_HDR_CRC(hdr)) { | 
|  | h5->rx_func = h5_rx_crc; | 
|  | h5->rx_pending = 2; | 
|  | } else { | 
|  | h5_complete_rx_pkt(hu); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | const unsigned char *hdr = h5->rx_skb->data; | 
|  |  | 
|  | BT_DBG("%s rx: seq %u ack %u crc %u rel %u type %u len %u", | 
|  | hu->hdev->name, H5_HDR_SEQ(hdr), H5_HDR_ACK(hdr), | 
|  | H5_HDR_CRC(hdr), H5_HDR_RELIABLE(hdr), H5_HDR_PKT_TYPE(hdr), | 
|  | H5_HDR_LEN(hdr)); | 
|  |  | 
|  | if (((hdr[0] + hdr[1] + hdr[2] + hdr[3]) & 0xff) != 0xff) { | 
|  | bt_dev_err(hu->hdev, "Invalid header checksum"); | 
|  | h5_reset_rx(h5); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (H5_HDR_RELIABLE(hdr) && H5_HDR_SEQ(hdr) != h5->tx_ack) { | 
|  | bt_dev_err(hu->hdev, "Out-of-order packet arrived (%u != %u)", | 
|  | H5_HDR_SEQ(hdr), h5->tx_ack); | 
|  | h5_reset_rx(h5); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (h5->state != H5_ACTIVE && | 
|  | H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) { | 
|  | bt_dev_err(hu->hdev, "Non-link packet received in non-active state"); | 
|  | h5_reset_rx(h5); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | h5->rx_func = h5_rx_payload; | 
|  | h5->rx_pending = H5_HDR_LEN(hdr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int h5_rx_pkt_start(struct hci_uart *hu, unsigned char c) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  |  | 
|  | if (c == SLIP_DELIMITER) | 
|  | return 1; | 
|  |  | 
|  | h5->rx_func = h5_rx_3wire_hdr; | 
|  | h5->rx_pending = 4; | 
|  |  | 
|  | h5->rx_skb = bt_skb_alloc(H5_MAX_LEN, GFP_ATOMIC); | 
|  | if (!h5->rx_skb) { | 
|  | bt_dev_err(hu->hdev, "Can't allocate mem for new packet"); | 
|  | h5_reset_rx(h5); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | h5->rx_skb->dev = (void *)hu->hdev; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int h5_rx_delimiter(struct hci_uart *hu, unsigned char c) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  |  | 
|  | if (c == SLIP_DELIMITER) | 
|  | h5->rx_func = h5_rx_pkt_start; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void h5_unslip_one_byte(struct h5 *h5, unsigned char c) | 
|  | { | 
|  | const u8 delim = SLIP_DELIMITER, esc = SLIP_ESC; | 
|  | const u8 *byte = &c; | 
|  |  | 
|  | if (!test_bit(H5_RX_ESC, &h5->flags) && c == SLIP_ESC) { | 
|  | set_bit(H5_RX_ESC, &h5->flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (test_and_clear_bit(H5_RX_ESC, &h5->flags)) { | 
|  | switch (c) { | 
|  | case SLIP_ESC_DELIM: | 
|  | byte = &delim; | 
|  | break; | 
|  | case SLIP_ESC_ESC: | 
|  | byte = &esc; | 
|  | break; | 
|  | default: | 
|  | BT_ERR("Invalid esc byte 0x%02hhx", c); | 
|  | h5_reset_rx(h5); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | skb_put_data(h5->rx_skb, byte, 1); | 
|  | h5->rx_pending--; | 
|  |  | 
|  | BT_DBG("unslipped 0x%02hhx, rx_pending %zu", *byte, h5->rx_pending); | 
|  | } | 
|  |  | 
|  | static void h5_reset_rx(struct h5 *h5) | 
|  | { | 
|  | if (h5->rx_skb) { | 
|  | kfree_skb(h5->rx_skb); | 
|  | h5->rx_skb = NULL; | 
|  | } | 
|  |  | 
|  | h5->rx_func = h5_rx_delimiter; | 
|  | h5->rx_pending = 0; | 
|  | clear_bit(H5_RX_ESC, &h5->flags); | 
|  | } | 
|  |  | 
|  | static int h5_recv(struct hci_uart *hu, const void *data, int count) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | const unsigned char *ptr = data; | 
|  |  | 
|  | BT_DBG("%s pending %zu count %d", hu->hdev->name, h5->rx_pending, | 
|  | count); | 
|  |  | 
|  | while (count > 0) { | 
|  | int processed; | 
|  |  | 
|  | if (h5->rx_pending > 0) { | 
|  | if (*ptr == SLIP_DELIMITER) { | 
|  | bt_dev_err(hu->hdev, "Too short H5 packet"); | 
|  | h5_reset_rx(h5); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | h5_unslip_one_byte(h5, *ptr); | 
|  |  | 
|  | ptr++; count--; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | processed = h5->rx_func(hu, *ptr); | 
|  | if (processed < 0) | 
|  | return processed; | 
|  |  | 
|  | ptr += processed; | 
|  | count -= processed; | 
|  | } | 
|  |  | 
|  | if (hu->serdev) { | 
|  | pm_runtime_get(&hu->serdev->dev); | 
|  | pm_runtime_mark_last_busy(&hu->serdev->dev); | 
|  | pm_runtime_put_autosuspend(&hu->serdev->dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int h5_enqueue(struct hci_uart *hu, struct sk_buff *skb) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  |  | 
|  | if (skb->len > 0xfff) { | 
|  | bt_dev_err(hu->hdev, "Packet too long (%u bytes)", skb->len); | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (h5->state != H5_ACTIVE) { | 
|  | bt_dev_err(hu->hdev, "Ignoring HCI data in non-active state"); | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch (hci_skb_pkt_type(skb)) { | 
|  | case HCI_ACLDATA_PKT: | 
|  | case HCI_COMMAND_PKT: | 
|  | skb_queue_tail(&h5->rel, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_SCODATA_PKT: | 
|  | case HCI_ISODATA_PKT: | 
|  | skb_queue_tail(&h5->unrel, skb); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | bt_dev_err(hu->hdev, "Unknown packet type %u", hci_skb_pkt_type(skb)); | 
|  | kfree_skb(skb); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (hu->serdev) { | 
|  | pm_runtime_get_sync(&hu->serdev->dev); | 
|  | pm_runtime_mark_last_busy(&hu->serdev->dev); | 
|  | pm_runtime_put_autosuspend(&hu->serdev->dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void h5_slip_delim(struct sk_buff *skb) | 
|  | { | 
|  | const char delim = SLIP_DELIMITER; | 
|  |  | 
|  | skb_put_data(skb, &delim, 1); | 
|  | } | 
|  |  | 
|  | static void h5_slip_one_byte(struct sk_buff *skb, u8 c) | 
|  | { | 
|  | const char esc_delim[2] = { SLIP_ESC, SLIP_ESC_DELIM }; | 
|  | const char esc_esc[2] = { SLIP_ESC, SLIP_ESC_ESC }; | 
|  |  | 
|  | switch (c) { | 
|  | case SLIP_DELIMITER: | 
|  | skb_put_data(skb, &esc_delim, 2); | 
|  | break; | 
|  | case SLIP_ESC: | 
|  | skb_put_data(skb, &esc_esc, 2); | 
|  | break; | 
|  | default: | 
|  | skb_put_data(skb, &c, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool valid_packet_type(u8 type) | 
|  | { | 
|  | switch (type) { | 
|  | case HCI_ACLDATA_PKT: | 
|  | case HCI_COMMAND_PKT: | 
|  | case HCI_SCODATA_PKT: | 
|  | case HCI_ISODATA_PKT: | 
|  | case HCI_3WIRE_LINK_PKT: | 
|  | case HCI_3WIRE_ACK_PKT: | 
|  | return true; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct sk_buff *h5_prepare_pkt(struct hci_uart *hu, u8 pkt_type, | 
|  | const u8 *data, size_t len) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | struct sk_buff *nskb; | 
|  | u8 hdr[4]; | 
|  | int i; | 
|  |  | 
|  | if (!valid_packet_type(pkt_type)) { | 
|  | bt_dev_err(hu->hdev, "Unknown packet type %u", pkt_type); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Max len of packet: (original len + 4 (H5 hdr) + 2 (crc)) * 2 | 
|  | * (because bytes 0xc0 and 0xdb are escaped, worst case is when | 
|  | * the packet is all made of 0xc0 and 0xdb) + 2 (0xc0 | 
|  | * delimiters at start and end). | 
|  | */ | 
|  | nskb = alloc_skb((len + 6) * 2 + 2, GFP_ATOMIC); | 
|  | if (!nskb) | 
|  | return NULL; | 
|  |  | 
|  | hci_skb_pkt_type(nskb) = pkt_type; | 
|  |  | 
|  | h5_slip_delim(nskb); | 
|  |  | 
|  | hdr[0] = h5->tx_ack << 3; | 
|  | clear_bit(H5_TX_ACK_REQ, &h5->flags); | 
|  |  | 
|  | /* Reliable packet? */ | 
|  | if (pkt_type == HCI_ACLDATA_PKT || pkt_type == HCI_COMMAND_PKT) { | 
|  | hdr[0] |= 1 << 7; | 
|  | hdr[0] |= h5->tx_seq; | 
|  | h5->tx_seq = (h5->tx_seq + 1) % 8; | 
|  | } | 
|  |  | 
|  | hdr[1] = pkt_type | ((len & 0x0f) << 4); | 
|  | hdr[2] = len >> 4; | 
|  | hdr[3] = ~((hdr[0] + hdr[1] + hdr[2]) & 0xff); | 
|  |  | 
|  | BT_DBG("%s tx: seq %u ack %u crc %u rel %u type %u len %u", | 
|  | hu->hdev->name, H5_HDR_SEQ(hdr), H5_HDR_ACK(hdr), | 
|  | H5_HDR_CRC(hdr), H5_HDR_RELIABLE(hdr), H5_HDR_PKT_TYPE(hdr), | 
|  | H5_HDR_LEN(hdr)); | 
|  |  | 
|  | for (i = 0; i < 4; i++) | 
|  | h5_slip_one_byte(nskb, hdr[i]); | 
|  |  | 
|  | for (i = 0; i < len; i++) | 
|  | h5_slip_one_byte(nskb, data[i]); | 
|  |  | 
|  | h5_slip_delim(nskb); | 
|  |  | 
|  | return nskb; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *h5_dequeue(struct hci_uart *hu) | 
|  | { | 
|  | struct h5 *h5 = hu->priv; | 
|  | unsigned long flags; | 
|  | struct sk_buff *skb, *nskb; | 
|  |  | 
|  | if (h5->sleep != H5_AWAKE) { | 
|  | const unsigned char wakeup_req[] = { 0x05, 0xfa }; | 
|  |  | 
|  | if (h5->sleep == H5_WAKING_UP) | 
|  | return NULL; | 
|  |  | 
|  | h5->sleep = H5_WAKING_UP; | 
|  | BT_DBG("Sending wakeup request"); | 
|  |  | 
|  | mod_timer(&h5->timer, jiffies + HZ / 100); | 
|  | return h5_prepare_pkt(hu, HCI_3WIRE_LINK_PKT, wakeup_req, 2); | 
|  | } | 
|  |  | 
|  | skb = skb_dequeue(&h5->unrel); | 
|  | if (skb) { | 
|  | nskb = h5_prepare_pkt(hu, hci_skb_pkt_type(skb), | 
|  | skb->data, skb->len); | 
|  | if (nskb) { | 
|  | kfree_skb(skb); | 
|  | return nskb; | 
|  | } | 
|  |  | 
|  | skb_queue_head(&h5->unrel, skb); | 
|  | bt_dev_err(hu->hdev, "Could not dequeue pkt because alloc_skb failed"); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave_nested(&h5->unack.lock, flags, SINGLE_DEPTH_NESTING); | 
|  |  | 
|  | if (h5->unack.qlen >= h5->tx_win) | 
|  | goto unlock; | 
|  |  | 
|  | skb = skb_dequeue(&h5->rel); | 
|  | if (skb) { | 
|  | nskb = h5_prepare_pkt(hu, hci_skb_pkt_type(skb), | 
|  | skb->data, skb->len); | 
|  | if (nskb) { | 
|  | __skb_queue_tail(&h5->unack, skb); | 
|  | mod_timer(&h5->timer, jiffies + H5_ACK_TIMEOUT); | 
|  | spin_unlock_irqrestore(&h5->unack.lock, flags); | 
|  | return nskb; | 
|  | } | 
|  |  | 
|  | skb_queue_head(&h5->rel, skb); | 
|  | bt_dev_err(hu->hdev, "Could not dequeue pkt because alloc_skb failed"); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | spin_unlock_irqrestore(&h5->unack.lock, flags); | 
|  |  | 
|  | if (test_bit(H5_TX_ACK_REQ, &h5->flags)) | 
|  | return h5_prepare_pkt(hu, HCI_3WIRE_ACK_PKT, NULL, 0); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int h5_flush(struct hci_uart *hu) | 
|  | { | 
|  | BT_DBG("hu %p", hu); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct hci_uart_proto h5p = { | 
|  | .id		= HCI_UART_3WIRE, | 
|  | .name		= "Three-wire (H5)", | 
|  | .open		= h5_open, | 
|  | .close		= h5_close, | 
|  | .setup		= h5_setup, | 
|  | .recv		= h5_recv, | 
|  | .enqueue	= h5_enqueue, | 
|  | .dequeue	= h5_dequeue, | 
|  | .flush		= h5_flush, | 
|  | }; | 
|  |  | 
|  | static int h5_serdev_probe(struct serdev_device *serdev) | 
|  | { | 
|  | struct device *dev = &serdev->dev; | 
|  | struct h5 *h5; | 
|  | const struct h5_device_data *data; | 
|  | int err; | 
|  |  | 
|  | h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL); | 
|  | if (!h5) | 
|  | return -ENOMEM; | 
|  |  | 
|  | h5->hu = &h5->serdev_hu; | 
|  | h5->serdev_hu.serdev = serdev; | 
|  | serdev_device_set_drvdata(serdev, h5); | 
|  |  | 
|  | if (has_acpi_companion(dev)) { | 
|  | const struct acpi_device_id *match; | 
|  |  | 
|  | match = acpi_match_device(dev->driver->acpi_match_table, dev); | 
|  | if (!match) | 
|  | return -ENODEV; | 
|  |  | 
|  | data = (const struct h5_device_data *)match->driver_data; | 
|  | h5->vnd = data->vnd; | 
|  | h5->id  = (char *)match->id; | 
|  |  | 
|  | if (h5->vnd->acpi_gpio_map) | 
|  | devm_acpi_dev_add_driver_gpios(dev, | 
|  | h5->vnd->acpi_gpio_map); | 
|  | } else { | 
|  | data = of_device_get_match_data(dev); | 
|  | if (!data) | 
|  | return -ENODEV; | 
|  |  | 
|  | h5->vnd = data->vnd; | 
|  | } | 
|  |  | 
|  | if (data->driver_info & H5_INFO_WAKEUP_DISABLE) | 
|  | set_bit(H5_WAKEUP_DISABLE, &h5->flags); | 
|  |  | 
|  | h5->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); | 
|  | if (IS_ERR(h5->enable_gpio)) | 
|  | return PTR_ERR(h5->enable_gpio); | 
|  |  | 
|  | h5->device_wake_gpio = devm_gpiod_get_optional(dev, "device-wake", | 
|  | GPIOD_OUT_LOW); | 
|  | if (IS_ERR(h5->device_wake_gpio)) | 
|  | return PTR_ERR(h5->device_wake_gpio); | 
|  |  | 
|  | err = hci_uart_register_device(&h5->serdev_hu, &h5p); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void h5_serdev_remove(struct serdev_device *serdev) | 
|  | { | 
|  | struct h5 *h5 = serdev_device_get_drvdata(serdev); | 
|  |  | 
|  | hci_uart_unregister_device(&h5->serdev_hu); | 
|  | } | 
|  |  | 
|  | static int __maybe_unused h5_serdev_suspend(struct device *dev) | 
|  | { | 
|  | struct h5 *h5 = dev_get_drvdata(dev); | 
|  | int ret = 0; | 
|  |  | 
|  | if (h5->vnd && h5->vnd->suspend) | 
|  | ret = h5->vnd->suspend(h5); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused h5_serdev_resume(struct device *dev) | 
|  | { | 
|  | struct h5 *h5 = dev_get_drvdata(dev); | 
|  | int ret = 0; | 
|  |  | 
|  | if (h5->vnd && h5->vnd->resume) | 
|  | ret = h5->vnd->resume(h5); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_BT_HCIUART_RTL | 
|  | static int h5_btrtl_setup(struct h5 *h5) | 
|  | { | 
|  | struct btrtl_device_info *btrtl_dev; | 
|  | struct sk_buff *skb; | 
|  | __le32 baudrate_data; | 
|  | u32 device_baudrate; | 
|  | unsigned int controller_baudrate; | 
|  | bool flow_control; | 
|  | int err; | 
|  |  | 
|  | btrtl_dev = btrtl_initialize(h5->hu->hdev, h5->id); | 
|  | if (IS_ERR(btrtl_dev)) | 
|  | return PTR_ERR(btrtl_dev); | 
|  |  | 
|  | err = btrtl_get_uart_settings(h5->hu->hdev, btrtl_dev, | 
|  | &controller_baudrate, &device_baudrate, | 
|  | &flow_control); | 
|  | if (err) | 
|  | goto out_free; | 
|  |  | 
|  | baudrate_data = cpu_to_le32(device_baudrate); | 
|  | skb = __hci_cmd_sync(h5->hu->hdev, 0xfc17, sizeof(baudrate_data), | 
|  | &baudrate_data, HCI_INIT_TIMEOUT); | 
|  | if (IS_ERR(skb)) { | 
|  | rtl_dev_err(h5->hu->hdev, "set baud rate command failed\n"); | 
|  | err = PTR_ERR(skb); | 
|  | goto out_free; | 
|  | } else { | 
|  | kfree_skb(skb); | 
|  | } | 
|  | /* Give the device some time to set up the new baudrate. */ | 
|  | usleep_range(10000, 20000); | 
|  |  | 
|  | serdev_device_set_baudrate(h5->hu->serdev, controller_baudrate); | 
|  | serdev_device_set_flow_control(h5->hu->serdev, flow_control); | 
|  |  | 
|  | if (flow_control) | 
|  | set_bit(H5_HW_FLOW_CONTROL, &h5->flags); | 
|  |  | 
|  | err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev); | 
|  | /* Give the device some time before the hci-core sends it a reset */ | 
|  | usleep_range(10000, 20000); | 
|  |  | 
|  | btrtl_set_quirks(h5->hu->hdev, btrtl_dev); | 
|  |  | 
|  | out_free: | 
|  | btrtl_free(btrtl_dev); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void h5_btrtl_open(struct h5 *h5) | 
|  | { | 
|  | /* | 
|  | * Since h5_btrtl_resume() does a device_reprobe() the suspend handling | 
|  | * done by the hci_suspend_notifier is not necessary; it actually causes | 
|  | * delays and a bunch of errors to get logged, so disable it. | 
|  | */ | 
|  | if (test_bit(H5_WAKEUP_DISABLE, &h5->flags)) | 
|  | set_bit(HCI_UART_NO_SUSPEND_NOTIFIER, &h5->hu->flags); | 
|  |  | 
|  | /* Devices always start with these fixed parameters */ | 
|  | serdev_device_set_flow_control(h5->hu->serdev, false); | 
|  | serdev_device_set_parity(h5->hu->serdev, SERDEV_PARITY_EVEN); | 
|  | serdev_device_set_baudrate(h5->hu->serdev, 115200); | 
|  |  | 
|  | if (!test_bit(H5_WAKEUP_DISABLE, &h5->flags)) { | 
|  | pm_runtime_set_active(&h5->hu->serdev->dev); | 
|  | pm_runtime_use_autosuspend(&h5->hu->serdev->dev); | 
|  | pm_runtime_set_autosuspend_delay(&h5->hu->serdev->dev, | 
|  | SUSPEND_TIMEOUT_MS); | 
|  | pm_runtime_enable(&h5->hu->serdev->dev); | 
|  | } | 
|  |  | 
|  | /* The controller needs up to 500ms to wakeup */ | 
|  | gpiod_set_value_cansleep(h5->enable_gpio, 1); | 
|  | gpiod_set_value_cansleep(h5->device_wake_gpio, 1); | 
|  | msleep(500); | 
|  | } | 
|  |  | 
|  | static void h5_btrtl_close(struct h5 *h5) | 
|  | { | 
|  | if (!test_bit(H5_WAKEUP_DISABLE, &h5->flags)) | 
|  | pm_runtime_disable(&h5->hu->serdev->dev); | 
|  |  | 
|  | gpiod_set_value_cansleep(h5->device_wake_gpio, 0); | 
|  | gpiod_set_value_cansleep(h5->enable_gpio, 0); | 
|  | } | 
|  |  | 
|  | /* Suspend/resume support. On many devices the RTL BT device loses power during | 
|  | * suspend/resume, causing it to lose its firmware and all state. So we simply | 
|  | * turn it off on suspend and reprobe on resume. This mirrors how RTL devices | 
|  | * are handled in the USB driver, where the BTUSB_WAKEUP_DISABLE is used which | 
|  | * also causes a reprobe on resume. | 
|  | */ | 
|  | static int h5_btrtl_suspend(struct h5 *h5) | 
|  | { | 
|  | serdev_device_set_flow_control(h5->hu->serdev, false); | 
|  | gpiod_set_value_cansleep(h5->device_wake_gpio, 0); | 
|  |  | 
|  | if (test_bit(H5_WAKEUP_DISABLE, &h5->flags)) | 
|  | gpiod_set_value_cansleep(h5->enable_gpio, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct h5_btrtl_reprobe { | 
|  | struct device *dev; | 
|  | struct work_struct work; | 
|  | }; | 
|  |  | 
|  | static void h5_btrtl_reprobe_worker(struct work_struct *work) | 
|  | { | 
|  | struct h5_btrtl_reprobe *reprobe = | 
|  | container_of(work, struct h5_btrtl_reprobe, work); | 
|  | int ret; | 
|  |  | 
|  | ret = device_reprobe(reprobe->dev); | 
|  | if (ret && ret != -EPROBE_DEFER) | 
|  | dev_err(reprobe->dev, "Reprobe error %d\n", ret); | 
|  |  | 
|  | put_device(reprobe->dev); | 
|  | kfree(reprobe); | 
|  | module_put(THIS_MODULE); | 
|  | } | 
|  |  | 
|  | static int h5_btrtl_resume(struct h5 *h5) | 
|  | { | 
|  | if (test_bit(H5_WAKEUP_DISABLE, &h5->flags)) { | 
|  | struct h5_btrtl_reprobe *reprobe; | 
|  |  | 
|  | reprobe = kzalloc(sizeof(*reprobe), GFP_KERNEL); | 
|  | if (!reprobe) | 
|  | return -ENOMEM; | 
|  |  | 
|  | __module_get(THIS_MODULE); | 
|  |  | 
|  | INIT_WORK(&reprobe->work, h5_btrtl_reprobe_worker); | 
|  | reprobe->dev = get_device(&h5->hu->serdev->dev); | 
|  | queue_work(system_long_wq, &reprobe->work); | 
|  | } else { | 
|  | gpiod_set_value_cansleep(h5->device_wake_gpio, 1); | 
|  |  | 
|  | if (test_bit(H5_HW_FLOW_CONTROL, &h5->flags)) | 
|  | serdev_device_set_flow_control(h5->hu->serdev, true); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct acpi_gpio_params btrtl_device_wake_gpios = { 0, 0, false }; | 
|  | static const struct acpi_gpio_params btrtl_enable_gpios = { 1, 0, false }; | 
|  | static const struct acpi_gpio_params btrtl_host_wake_gpios = { 2, 0, false }; | 
|  | static const struct acpi_gpio_mapping acpi_btrtl_gpios[] = { | 
|  | { "device-wake-gpios", &btrtl_device_wake_gpios, 1 }, | 
|  | { "enable-gpios", &btrtl_enable_gpios, 1 }, | 
|  | { "host-wake-gpios", &btrtl_host_wake_gpios, 1 }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | static struct h5_vnd rtl_vnd = { | 
|  | .setup		= h5_btrtl_setup, | 
|  | .open		= h5_btrtl_open, | 
|  | .close		= h5_btrtl_close, | 
|  | .suspend	= h5_btrtl_suspend, | 
|  | .resume		= h5_btrtl_resume, | 
|  | .acpi_gpio_map	= acpi_btrtl_gpios, | 
|  | }; | 
|  |  | 
|  | static const struct h5_device_data h5_data_rtl8822cs = { | 
|  | .vnd = &rtl_vnd, | 
|  | }; | 
|  |  | 
|  | static const struct h5_device_data h5_data_rtl8723bs = { | 
|  | .driver_info = H5_INFO_WAKEUP_DISABLE, | 
|  | .vnd = &rtl_vnd, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_ACPI | 
|  | static const struct acpi_device_id h5_acpi_match[] = { | 
|  | #ifdef CONFIG_BT_HCIUART_RTL | 
|  | { "OBDA0623", (kernel_ulong_t)&h5_data_rtl8723bs }, | 
|  | { "OBDA8723", (kernel_ulong_t)&h5_data_rtl8723bs }, | 
|  | #endif | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, h5_acpi_match); | 
|  | #endif | 
|  |  | 
|  | static const struct dev_pm_ops h5_serdev_pm_ops = { | 
|  | SET_SYSTEM_SLEEP_PM_OPS(h5_serdev_suspend, h5_serdev_resume) | 
|  | SET_RUNTIME_PM_OPS(h5_serdev_suspend, h5_serdev_resume, NULL) | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id rtl_bluetooth_of_match[] = { | 
|  | #ifdef CONFIG_BT_HCIUART_RTL | 
|  | { .compatible = "realtek,rtl8822cs-bt", | 
|  | .data = (const void *)&h5_data_rtl8822cs }, | 
|  | { .compatible = "realtek,rtl8723bs-bt", | 
|  | .data = (const void *)&h5_data_rtl8723bs }, | 
|  | { .compatible = "realtek,rtl8723ds-bt", | 
|  | .data = (const void *)&h5_data_rtl8723bs }, | 
|  | #endif | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, rtl_bluetooth_of_match); | 
|  |  | 
|  | static struct serdev_device_driver h5_serdev_driver = { | 
|  | .probe = h5_serdev_probe, | 
|  | .remove = h5_serdev_remove, | 
|  | .driver = { | 
|  | .name = "hci_uart_h5", | 
|  | .acpi_match_table = ACPI_PTR(h5_acpi_match), | 
|  | .pm = &h5_serdev_pm_ops, | 
|  | .of_match_table = rtl_bluetooth_of_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | int __init h5_init(void) | 
|  | { | 
|  | serdev_device_driver_register(&h5_serdev_driver); | 
|  | return hci_uart_register_proto(&h5p); | 
|  | } | 
|  |  | 
|  | int __exit h5_deinit(void) | 
|  | { | 
|  | serdev_device_driver_unregister(&h5_serdev_driver); | 
|  | return hci_uart_unregister_proto(&h5p); | 
|  | } |