|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * pSeries_lpar.c | 
|  | * Copyright (C) 2001 Todd Inglett, IBM Corporation | 
|  | * | 
|  | * pSeries LPAR support. | 
|  | */ | 
|  |  | 
|  | /* Enables debugging of low-level hash table routines - careful! */ | 
|  | #undef DEBUG | 
|  | #define pr_fmt(fmt) "lpar: " fmt | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/console.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/jump_label.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/stop_machine.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/cpuhotplug.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <asm/processor.h> | 
|  | #include <asm/mmu.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/mmu_context.h> | 
|  | #include <asm/iommu.h> | 
|  | #include <asm/tlb.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/cputable.h> | 
|  | #include <asm/udbg.h> | 
|  | #include <asm/smp.h> | 
|  | #include <asm/trace.h> | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/plpar_wrappers.h> | 
|  | #include <asm/kexec.h> | 
|  | #include <asm/fadump.h> | 
|  | #include <asm/asm-prototypes.h> | 
|  | #include <asm/debugfs.h> | 
|  |  | 
|  | #include "pseries.h" | 
|  |  | 
|  | /* Flag bits for H_BULK_REMOVE */ | 
|  | #define HBR_REQUEST	0x4000000000000000UL | 
|  | #define HBR_RESPONSE	0x8000000000000000UL | 
|  | #define HBR_END		0xc000000000000000UL | 
|  | #define HBR_AVPN	0x0200000000000000UL | 
|  | #define HBR_ANDCOND	0x0100000000000000UL | 
|  |  | 
|  |  | 
|  | /* in hvCall.S */ | 
|  | EXPORT_SYMBOL(plpar_hcall); | 
|  | EXPORT_SYMBOL(plpar_hcall9); | 
|  | EXPORT_SYMBOL(plpar_hcall_norets); | 
|  |  | 
|  | /* | 
|  | * H_BLOCK_REMOVE supported block size for this page size in segment who's base | 
|  | * page size is that page size. | 
|  | * | 
|  | * The first index is the segment base page size, the second one is the actual | 
|  | * page size. | 
|  | */ | 
|  | static int hblkrm_size[MMU_PAGE_COUNT][MMU_PAGE_COUNT] __ro_after_init; | 
|  |  | 
|  | /* | 
|  | * Due to the involved complexity, and that the current hypervisor is only | 
|  | * returning this value or 0, we are limiting the support of the H_BLOCK_REMOVE | 
|  | * buffer size to 8 size block. | 
|  | */ | 
|  | #define HBLKRM_SUPPORTED_BLOCK_SIZE 8 | 
|  |  | 
|  | #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE | 
|  | static u8 dtl_mask = DTL_LOG_PREEMPT; | 
|  | #else | 
|  | static u8 dtl_mask; | 
|  | #endif | 
|  |  | 
|  | void alloc_dtl_buffers(unsigned long *time_limit) | 
|  | { | 
|  | int cpu; | 
|  | struct paca_struct *pp; | 
|  | struct dtl_entry *dtl; | 
|  |  | 
|  | for_each_possible_cpu(cpu) { | 
|  | pp = paca_ptrs[cpu]; | 
|  | if (pp->dispatch_log) | 
|  | continue; | 
|  | dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL); | 
|  | if (!dtl) { | 
|  | pr_warn("Failed to allocate dispatch trace log for cpu %d\n", | 
|  | cpu); | 
|  | #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE | 
|  | pr_warn("Stolen time statistics will be unreliable\n"); | 
|  | #endif | 
|  | break; | 
|  | } | 
|  |  | 
|  | pp->dtl_ridx = 0; | 
|  | pp->dispatch_log = dtl; | 
|  | pp->dispatch_log_end = dtl + N_DISPATCH_LOG; | 
|  | pp->dtl_curr = dtl; | 
|  |  | 
|  | if (time_limit && time_after(jiffies, *time_limit)) { | 
|  | cond_resched(); | 
|  | *time_limit = jiffies + HZ; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void register_dtl_buffer(int cpu) | 
|  | { | 
|  | long ret; | 
|  | struct paca_struct *pp; | 
|  | struct dtl_entry *dtl; | 
|  | int hwcpu = get_hard_smp_processor_id(cpu); | 
|  |  | 
|  | pp = paca_ptrs[cpu]; | 
|  | dtl = pp->dispatch_log; | 
|  | if (dtl && dtl_mask) { | 
|  | pp->dtl_ridx = 0; | 
|  | pp->dtl_curr = dtl; | 
|  | lppaca_of(cpu).dtl_idx = 0; | 
|  |  | 
|  | /* hypervisor reads buffer length from this field */ | 
|  | dtl->enqueue_to_dispatch_time = cpu_to_be32(DISPATCH_LOG_BYTES); | 
|  | ret = register_dtl(hwcpu, __pa(dtl)); | 
|  | if (ret) | 
|  | pr_err("WARNING: DTL registration of cpu %d (hw %d) failed with %ld\n", | 
|  | cpu, hwcpu, ret); | 
|  |  | 
|  | lppaca_of(cpu).dtl_enable_mask = dtl_mask; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_SPLPAR | 
|  | struct dtl_worker { | 
|  | struct delayed_work work; | 
|  | int cpu; | 
|  | }; | 
|  |  | 
|  | struct vcpu_dispatch_data { | 
|  | int last_disp_cpu; | 
|  |  | 
|  | int total_disp; | 
|  |  | 
|  | int same_cpu_disp; | 
|  | int same_chip_disp; | 
|  | int diff_chip_disp; | 
|  | int far_chip_disp; | 
|  |  | 
|  | int numa_home_disp; | 
|  | int numa_remote_disp; | 
|  | int numa_far_disp; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * This represents the number of cpus in the hypervisor. Since there is no | 
|  | * architected way to discover the number of processors in the host, we | 
|  | * provision for dealing with NR_CPUS. This is currently 2048 by default, and | 
|  | * is sufficient for our purposes. This will need to be tweaked if | 
|  | * CONFIG_NR_CPUS is changed. | 
|  | */ | 
|  | #define NR_CPUS_H	NR_CPUS | 
|  |  | 
|  | DEFINE_RWLOCK(dtl_access_lock); | 
|  | static DEFINE_PER_CPU(struct vcpu_dispatch_data, vcpu_disp_data); | 
|  | static DEFINE_PER_CPU(u64, dtl_entry_ridx); | 
|  | static DEFINE_PER_CPU(struct dtl_worker, dtl_workers); | 
|  | static enum cpuhp_state dtl_worker_state; | 
|  | static DEFINE_MUTEX(dtl_enable_mutex); | 
|  | static int vcpudispatch_stats_on __read_mostly; | 
|  | static int vcpudispatch_stats_freq = 50; | 
|  | static __be32 *vcpu_associativity, *pcpu_associativity; | 
|  |  | 
|  |  | 
|  | static void free_dtl_buffers(unsigned long *time_limit) | 
|  | { | 
|  | #ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE | 
|  | int cpu; | 
|  | struct paca_struct *pp; | 
|  |  | 
|  | for_each_possible_cpu(cpu) { | 
|  | pp = paca_ptrs[cpu]; | 
|  | if (!pp->dispatch_log) | 
|  | continue; | 
|  | kmem_cache_free(dtl_cache, pp->dispatch_log); | 
|  | pp->dtl_ridx = 0; | 
|  | pp->dispatch_log = 0; | 
|  | pp->dispatch_log_end = 0; | 
|  | pp->dtl_curr = 0; | 
|  |  | 
|  | if (time_limit && time_after(jiffies, *time_limit)) { | 
|  | cond_resched(); | 
|  | *time_limit = jiffies + HZ; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static int init_cpu_associativity(void) | 
|  | { | 
|  | vcpu_associativity = kcalloc(num_possible_cpus() / threads_per_core, | 
|  | VPHN_ASSOC_BUFSIZE * sizeof(__be32), GFP_KERNEL); | 
|  | pcpu_associativity = kcalloc(NR_CPUS_H / threads_per_core, | 
|  | VPHN_ASSOC_BUFSIZE * sizeof(__be32), GFP_KERNEL); | 
|  |  | 
|  | if (!vcpu_associativity || !pcpu_associativity) { | 
|  | pr_err("error allocating memory for associativity information\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void destroy_cpu_associativity(void) | 
|  | { | 
|  | kfree(vcpu_associativity); | 
|  | kfree(pcpu_associativity); | 
|  | vcpu_associativity = pcpu_associativity = 0; | 
|  | } | 
|  |  | 
|  | static __be32 *__get_cpu_associativity(int cpu, __be32 *cpu_assoc, int flag) | 
|  | { | 
|  | __be32 *assoc; | 
|  | int rc = 0; | 
|  |  | 
|  | assoc = &cpu_assoc[(int)(cpu / threads_per_core) * VPHN_ASSOC_BUFSIZE]; | 
|  | if (!assoc[0]) { | 
|  | rc = hcall_vphn(cpu, flag, &assoc[0]); | 
|  | if (rc) | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return assoc; | 
|  | } | 
|  |  | 
|  | static __be32 *get_pcpu_associativity(int cpu) | 
|  | { | 
|  | return __get_cpu_associativity(cpu, pcpu_associativity, VPHN_FLAG_PCPU); | 
|  | } | 
|  |  | 
|  | static __be32 *get_vcpu_associativity(int cpu) | 
|  | { | 
|  | return __get_cpu_associativity(cpu, vcpu_associativity, VPHN_FLAG_VCPU); | 
|  | } | 
|  |  | 
|  | static int cpu_relative_dispatch_distance(int last_disp_cpu, int cur_disp_cpu) | 
|  | { | 
|  | __be32 *last_disp_cpu_assoc, *cur_disp_cpu_assoc; | 
|  |  | 
|  | if (last_disp_cpu >= NR_CPUS_H || cur_disp_cpu >= NR_CPUS_H) | 
|  | return -EINVAL; | 
|  |  | 
|  | last_disp_cpu_assoc = get_pcpu_associativity(last_disp_cpu); | 
|  | cur_disp_cpu_assoc = get_pcpu_associativity(cur_disp_cpu); | 
|  |  | 
|  | if (!last_disp_cpu_assoc || !cur_disp_cpu_assoc) | 
|  | return -EIO; | 
|  |  | 
|  | return cpu_distance(last_disp_cpu_assoc, cur_disp_cpu_assoc); | 
|  | } | 
|  |  | 
|  | static int cpu_home_node_dispatch_distance(int disp_cpu) | 
|  | { | 
|  | __be32 *disp_cpu_assoc, *vcpu_assoc; | 
|  | int vcpu_id = smp_processor_id(); | 
|  |  | 
|  | if (disp_cpu >= NR_CPUS_H) { | 
|  | pr_debug_ratelimited("vcpu dispatch cpu %d > %d\n", | 
|  | disp_cpu, NR_CPUS_H); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | disp_cpu_assoc = get_pcpu_associativity(disp_cpu); | 
|  | vcpu_assoc = get_vcpu_associativity(vcpu_id); | 
|  |  | 
|  | if (!disp_cpu_assoc || !vcpu_assoc) | 
|  | return -EIO; | 
|  |  | 
|  | return cpu_distance(disp_cpu_assoc, vcpu_assoc); | 
|  | } | 
|  |  | 
|  | static void update_vcpu_disp_stat(int disp_cpu) | 
|  | { | 
|  | struct vcpu_dispatch_data *disp; | 
|  | int distance; | 
|  |  | 
|  | disp = this_cpu_ptr(&vcpu_disp_data); | 
|  | if (disp->last_disp_cpu == -1) { | 
|  | disp->last_disp_cpu = disp_cpu; | 
|  | return; | 
|  | } | 
|  |  | 
|  | disp->total_disp++; | 
|  |  | 
|  | if (disp->last_disp_cpu == disp_cpu || | 
|  | (cpu_first_thread_sibling(disp->last_disp_cpu) == | 
|  | cpu_first_thread_sibling(disp_cpu))) | 
|  | disp->same_cpu_disp++; | 
|  | else { | 
|  | distance = cpu_relative_dispatch_distance(disp->last_disp_cpu, | 
|  | disp_cpu); | 
|  | if (distance < 0) | 
|  | pr_debug_ratelimited("vcpudispatch_stats: cpu %d: error determining associativity\n", | 
|  | smp_processor_id()); | 
|  | else { | 
|  | switch (distance) { | 
|  | case 0: | 
|  | disp->same_chip_disp++; | 
|  | break; | 
|  | case 1: | 
|  | disp->diff_chip_disp++; | 
|  | break; | 
|  | case 2: | 
|  | disp->far_chip_disp++; | 
|  | break; | 
|  | default: | 
|  | pr_debug_ratelimited("vcpudispatch_stats: cpu %d (%d -> %d): unexpected relative dispatch distance %d\n", | 
|  | smp_processor_id(), | 
|  | disp->last_disp_cpu, | 
|  | disp_cpu, | 
|  | distance); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | distance = cpu_home_node_dispatch_distance(disp_cpu); | 
|  | if (distance < 0) | 
|  | pr_debug_ratelimited("vcpudispatch_stats: cpu %d: error determining associativity\n", | 
|  | smp_processor_id()); | 
|  | else { | 
|  | switch (distance) { | 
|  | case 0: | 
|  | disp->numa_home_disp++; | 
|  | break; | 
|  | case 1: | 
|  | disp->numa_remote_disp++; | 
|  | break; | 
|  | case 2: | 
|  | disp->numa_far_disp++; | 
|  | break; | 
|  | default: | 
|  | pr_debug_ratelimited("vcpudispatch_stats: cpu %d on %d: unexpected numa dispatch distance %d\n", | 
|  | smp_processor_id(), | 
|  | disp_cpu, | 
|  | distance); | 
|  | } | 
|  | } | 
|  |  | 
|  | disp->last_disp_cpu = disp_cpu; | 
|  | } | 
|  |  | 
|  | static void process_dtl_buffer(struct work_struct *work) | 
|  | { | 
|  | struct dtl_entry dtle; | 
|  | u64 i = __this_cpu_read(dtl_entry_ridx); | 
|  | struct dtl_entry *dtl = local_paca->dispatch_log + (i % N_DISPATCH_LOG); | 
|  | struct dtl_entry *dtl_end = local_paca->dispatch_log_end; | 
|  | struct lppaca *vpa = local_paca->lppaca_ptr; | 
|  | struct dtl_worker *d = container_of(work, struct dtl_worker, work.work); | 
|  |  | 
|  | if (!local_paca->dispatch_log) | 
|  | return; | 
|  |  | 
|  | /* if we have been migrated away, we cancel ourself */ | 
|  | if (d->cpu != smp_processor_id()) { | 
|  | pr_debug("vcpudispatch_stats: cpu %d worker migrated -- canceling worker\n", | 
|  | smp_processor_id()); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (i == be64_to_cpu(vpa->dtl_idx)) | 
|  | goto out; | 
|  |  | 
|  | while (i < be64_to_cpu(vpa->dtl_idx)) { | 
|  | dtle = *dtl; | 
|  | barrier(); | 
|  | if (i + N_DISPATCH_LOG < be64_to_cpu(vpa->dtl_idx)) { | 
|  | /* buffer has overflowed */ | 
|  | pr_debug_ratelimited("vcpudispatch_stats: cpu %d lost %lld DTL samples\n", | 
|  | d->cpu, | 
|  | be64_to_cpu(vpa->dtl_idx) - N_DISPATCH_LOG - i); | 
|  | i = be64_to_cpu(vpa->dtl_idx) - N_DISPATCH_LOG; | 
|  | dtl = local_paca->dispatch_log + (i % N_DISPATCH_LOG); | 
|  | continue; | 
|  | } | 
|  | update_vcpu_disp_stat(be16_to_cpu(dtle.processor_id)); | 
|  | ++i; | 
|  | ++dtl; | 
|  | if (dtl == dtl_end) | 
|  | dtl = local_paca->dispatch_log; | 
|  | } | 
|  |  | 
|  | __this_cpu_write(dtl_entry_ridx, i); | 
|  |  | 
|  | out: | 
|  | schedule_delayed_work_on(d->cpu, to_delayed_work(work), | 
|  | HZ / vcpudispatch_stats_freq); | 
|  | } | 
|  |  | 
|  | static int dtl_worker_online(unsigned int cpu) | 
|  | { | 
|  | struct dtl_worker *d = &per_cpu(dtl_workers, cpu); | 
|  |  | 
|  | memset(d, 0, sizeof(*d)); | 
|  | INIT_DELAYED_WORK(&d->work, process_dtl_buffer); | 
|  | d->cpu = cpu; | 
|  |  | 
|  | #ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE | 
|  | per_cpu(dtl_entry_ridx, cpu) = 0; | 
|  | register_dtl_buffer(cpu); | 
|  | #else | 
|  | per_cpu(dtl_entry_ridx, cpu) = be64_to_cpu(lppaca_of(cpu).dtl_idx); | 
|  | #endif | 
|  |  | 
|  | schedule_delayed_work_on(cpu, &d->work, HZ / vcpudispatch_stats_freq); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dtl_worker_offline(unsigned int cpu) | 
|  | { | 
|  | struct dtl_worker *d = &per_cpu(dtl_workers, cpu); | 
|  |  | 
|  | cancel_delayed_work_sync(&d->work); | 
|  |  | 
|  | #ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE | 
|  | unregister_dtl(get_hard_smp_processor_id(cpu)); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void set_global_dtl_mask(u8 mask) | 
|  | { | 
|  | int cpu; | 
|  |  | 
|  | dtl_mask = mask; | 
|  | for_each_present_cpu(cpu) | 
|  | lppaca_of(cpu).dtl_enable_mask = dtl_mask; | 
|  | } | 
|  |  | 
|  | static void reset_global_dtl_mask(void) | 
|  | { | 
|  | int cpu; | 
|  |  | 
|  | #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE | 
|  | dtl_mask = DTL_LOG_PREEMPT; | 
|  | #else | 
|  | dtl_mask = 0; | 
|  | #endif | 
|  | for_each_present_cpu(cpu) | 
|  | lppaca_of(cpu).dtl_enable_mask = dtl_mask; | 
|  | } | 
|  |  | 
|  | static int dtl_worker_enable(unsigned long *time_limit) | 
|  | { | 
|  | int rc = 0, state; | 
|  |  | 
|  | if (!write_trylock(&dtl_access_lock)) { | 
|  | rc = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | set_global_dtl_mask(DTL_LOG_ALL); | 
|  |  | 
|  | /* Setup dtl buffers and register those */ | 
|  | alloc_dtl_buffers(time_limit); | 
|  |  | 
|  | state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powerpc/dtl:online", | 
|  | dtl_worker_online, dtl_worker_offline); | 
|  | if (state < 0) { | 
|  | pr_err("vcpudispatch_stats: unable to setup workqueue for DTL processing\n"); | 
|  | free_dtl_buffers(time_limit); | 
|  | reset_global_dtl_mask(); | 
|  | write_unlock(&dtl_access_lock); | 
|  | rc = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | dtl_worker_state = state; | 
|  |  | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void dtl_worker_disable(unsigned long *time_limit) | 
|  | { | 
|  | cpuhp_remove_state(dtl_worker_state); | 
|  | free_dtl_buffers(time_limit); | 
|  | reset_global_dtl_mask(); | 
|  | write_unlock(&dtl_access_lock); | 
|  | } | 
|  |  | 
|  | static ssize_t vcpudispatch_stats_write(struct file *file, const char __user *p, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | unsigned long time_limit = jiffies + HZ; | 
|  | struct vcpu_dispatch_data *disp; | 
|  | int rc, cmd, cpu; | 
|  | char buf[16]; | 
|  |  | 
|  | if (count > 15) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (copy_from_user(buf, p, count)) | 
|  | return -EFAULT; | 
|  |  | 
|  | buf[count] = 0; | 
|  | rc = kstrtoint(buf, 0, &cmd); | 
|  | if (rc || cmd < 0 || cmd > 1) { | 
|  | pr_err("vcpudispatch_stats: please use 0 to disable or 1 to enable dispatch statistics\n"); | 
|  | return rc ? rc : -EINVAL; | 
|  | } | 
|  |  | 
|  | mutex_lock(&dtl_enable_mutex); | 
|  |  | 
|  | if ((cmd == 0 && !vcpudispatch_stats_on) || | 
|  | (cmd == 1 && vcpudispatch_stats_on)) | 
|  | goto out; | 
|  |  | 
|  | if (cmd) { | 
|  | rc = init_cpu_associativity(); | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | for_each_possible_cpu(cpu) { | 
|  | disp = per_cpu_ptr(&vcpu_disp_data, cpu); | 
|  | memset(disp, 0, sizeof(*disp)); | 
|  | disp->last_disp_cpu = -1; | 
|  | } | 
|  |  | 
|  | rc = dtl_worker_enable(&time_limit); | 
|  | if (rc) { | 
|  | destroy_cpu_associativity(); | 
|  | goto out; | 
|  | } | 
|  | } else { | 
|  | dtl_worker_disable(&time_limit); | 
|  | destroy_cpu_associativity(); | 
|  | } | 
|  |  | 
|  | vcpudispatch_stats_on = cmd; | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&dtl_enable_mutex); | 
|  | if (rc) | 
|  | return rc; | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static int vcpudispatch_stats_display(struct seq_file *p, void *v) | 
|  | { | 
|  | int cpu; | 
|  | struct vcpu_dispatch_data *disp; | 
|  |  | 
|  | if (!vcpudispatch_stats_on) { | 
|  | seq_puts(p, "off\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for_each_online_cpu(cpu) { | 
|  | disp = per_cpu_ptr(&vcpu_disp_data, cpu); | 
|  | seq_printf(p, "cpu%d", cpu); | 
|  | seq_put_decimal_ull(p, " ", disp->total_disp); | 
|  | seq_put_decimal_ull(p, " ", disp->same_cpu_disp); | 
|  | seq_put_decimal_ull(p, " ", disp->same_chip_disp); | 
|  | seq_put_decimal_ull(p, " ", disp->diff_chip_disp); | 
|  | seq_put_decimal_ull(p, " ", disp->far_chip_disp); | 
|  | seq_put_decimal_ull(p, " ", disp->numa_home_disp); | 
|  | seq_put_decimal_ull(p, " ", disp->numa_remote_disp); | 
|  | seq_put_decimal_ull(p, " ", disp->numa_far_disp); | 
|  | seq_puts(p, "\n"); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vcpudispatch_stats_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, vcpudispatch_stats_display, NULL); | 
|  | } | 
|  |  | 
|  | static const struct file_operations vcpudispatch_stats_proc_ops = { | 
|  | .open		= vcpudispatch_stats_open, | 
|  | .read		= seq_read, | 
|  | .write		= vcpudispatch_stats_write, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | static ssize_t vcpudispatch_stats_freq_write(struct file *file, | 
|  | const char __user *p, size_t count, loff_t *ppos) | 
|  | { | 
|  | int rc, freq; | 
|  | char buf[16]; | 
|  |  | 
|  | if (count > 15) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (copy_from_user(buf, p, count)) | 
|  | return -EFAULT; | 
|  |  | 
|  | buf[count] = 0; | 
|  | rc = kstrtoint(buf, 0, &freq); | 
|  | if (rc || freq < 1 || freq > HZ) { | 
|  | pr_err("vcpudispatch_stats_freq: please specify a frequency between 1 and %d\n", | 
|  | HZ); | 
|  | return rc ? rc : -EINVAL; | 
|  | } | 
|  |  | 
|  | vcpudispatch_stats_freq = freq; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static int vcpudispatch_stats_freq_display(struct seq_file *p, void *v) | 
|  | { | 
|  | seq_printf(p, "%d\n", vcpudispatch_stats_freq); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vcpudispatch_stats_freq_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, vcpudispatch_stats_freq_display, NULL); | 
|  | } | 
|  |  | 
|  | static const struct file_operations vcpudispatch_stats_freq_proc_ops = { | 
|  | .open		= vcpudispatch_stats_freq_open, | 
|  | .read		= seq_read, | 
|  | .write		= vcpudispatch_stats_freq_write, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | static int __init vcpudispatch_stats_procfs_init(void) | 
|  | { | 
|  | if (!lppaca_shared_proc(get_lppaca())) | 
|  | return 0; | 
|  |  | 
|  | if (!proc_create("powerpc/vcpudispatch_stats", 0600, NULL, | 
|  | &vcpudispatch_stats_proc_ops)) | 
|  | pr_err("vcpudispatch_stats: error creating procfs file\n"); | 
|  | else if (!proc_create("powerpc/vcpudispatch_stats_freq", 0600, NULL, | 
|  | &vcpudispatch_stats_freq_proc_ops)) | 
|  | pr_err("vcpudispatch_stats_freq: error creating procfs file\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | machine_device_initcall(pseries, vcpudispatch_stats_procfs_init); | 
|  | #endif /* CONFIG_PPC_SPLPAR */ | 
|  |  | 
|  | void vpa_init(int cpu) | 
|  | { | 
|  | int hwcpu = get_hard_smp_processor_id(cpu); | 
|  | unsigned long addr; | 
|  | long ret; | 
|  |  | 
|  | /* | 
|  | * The spec says it "may be problematic" if CPU x registers the VPA of | 
|  | * CPU y. We should never do that, but wail if we ever do. | 
|  | */ | 
|  | WARN_ON(cpu != smp_processor_id()); | 
|  |  | 
|  | if (cpu_has_feature(CPU_FTR_ALTIVEC)) | 
|  | lppaca_of(cpu).vmxregs_in_use = 1; | 
|  |  | 
|  | if (cpu_has_feature(CPU_FTR_ARCH_207S)) | 
|  | lppaca_of(cpu).ebb_regs_in_use = 1; | 
|  |  | 
|  | addr = __pa(&lppaca_of(cpu)); | 
|  | ret = register_vpa(hwcpu, addr); | 
|  |  | 
|  | if (ret) { | 
|  | pr_err("WARNING: VPA registration for cpu %d (hw %d) of area " | 
|  | "%lx failed with %ld\n", cpu, hwcpu, addr, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_BOOK3S_64 | 
|  | /* | 
|  | * PAPR says this feature is SLB-Buffer but firmware never | 
|  | * reports that.  All SPLPAR support SLB shadow buffer. | 
|  | */ | 
|  | if (!radix_enabled() && firmware_has_feature(FW_FEATURE_SPLPAR)) { | 
|  | addr = __pa(paca_ptrs[cpu]->slb_shadow_ptr); | 
|  | ret = register_slb_shadow(hwcpu, addr); | 
|  | if (ret) | 
|  | pr_err("WARNING: SLB shadow buffer registration for " | 
|  | "cpu %d (hw %d) of area %lx failed with %ld\n", | 
|  | cpu, hwcpu, addr, ret); | 
|  | } | 
|  | #endif /* CONFIG_PPC_BOOK3S_64 */ | 
|  |  | 
|  | /* | 
|  | * Register dispatch trace log, if one has been allocated. | 
|  | */ | 
|  | register_dtl_buffer(cpu); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_BOOK3S_64 | 
|  |  | 
|  | static long pSeries_lpar_hpte_insert(unsigned long hpte_group, | 
|  | unsigned long vpn, unsigned long pa, | 
|  | unsigned long rflags, unsigned long vflags, | 
|  | int psize, int apsize, int ssize) | 
|  | { | 
|  | unsigned long lpar_rc; | 
|  | unsigned long flags; | 
|  | unsigned long slot; | 
|  | unsigned long hpte_v, hpte_r; | 
|  |  | 
|  | if (!(vflags & HPTE_V_BOLTED)) | 
|  | pr_devel("hpte_insert(group=%lx, vpn=%016lx, " | 
|  | "pa=%016lx, rflags=%lx, vflags=%lx, psize=%d)\n", | 
|  | hpte_group, vpn,  pa, rflags, vflags, psize); | 
|  |  | 
|  | hpte_v = hpte_encode_v(vpn, psize, apsize, ssize) | vflags | HPTE_V_VALID; | 
|  | hpte_r = hpte_encode_r(pa, psize, apsize) | rflags; | 
|  |  | 
|  | if (!(vflags & HPTE_V_BOLTED)) | 
|  | pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); | 
|  |  | 
|  | /* Now fill in the actual HPTE */ | 
|  | /* Set CEC cookie to 0         */ | 
|  | /* Zero page = 0               */ | 
|  | /* I-cache Invalidate = 0      */ | 
|  | /* I-cache synchronize = 0     */ | 
|  | /* Exact = 0                   */ | 
|  | flags = 0; | 
|  |  | 
|  | if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N)) | 
|  | flags |= H_COALESCE_CAND; | 
|  |  | 
|  | lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot); | 
|  | if (unlikely(lpar_rc == H_PTEG_FULL)) { | 
|  | pr_devel("Hash table group is full\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Since we try and ioremap PHBs we don't own, the pte insert | 
|  | * will fail. However we must catch the failure in hash_page | 
|  | * or we will loop forever, so return -2 in this case. | 
|  | */ | 
|  | if (unlikely(lpar_rc != H_SUCCESS)) { | 
|  | pr_err("Failed hash pte insert with error %ld\n", lpar_rc); | 
|  | return -2; | 
|  | } | 
|  | if (!(vflags & HPTE_V_BOLTED)) | 
|  | pr_devel(" -> slot: %lu\n", slot & 7); | 
|  |  | 
|  | /* Because of iSeries, we have to pass down the secondary | 
|  | * bucket bit here as well | 
|  | */ | 
|  | return (slot & 7) | (!!(vflags & HPTE_V_SECONDARY) << 3); | 
|  | } | 
|  |  | 
|  | static DEFINE_SPINLOCK(pSeries_lpar_tlbie_lock); | 
|  |  | 
|  | static long pSeries_lpar_hpte_remove(unsigned long hpte_group) | 
|  | { | 
|  | unsigned long slot_offset; | 
|  | unsigned long lpar_rc; | 
|  | int i; | 
|  | unsigned long dummy1, dummy2; | 
|  |  | 
|  | /* pick a random slot to start at */ | 
|  | slot_offset = mftb() & 0x7; | 
|  |  | 
|  | for (i = 0; i < HPTES_PER_GROUP; i++) { | 
|  |  | 
|  | /* don't remove a bolted entry */ | 
|  | lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset, | 
|  | (0x1UL << 4), &dummy1, &dummy2); | 
|  | if (lpar_rc == H_SUCCESS) | 
|  | return i; | 
|  |  | 
|  | /* | 
|  | * The test for adjunct partition is performed before the | 
|  | * ANDCOND test.  H_RESOURCE may be returned, so we need to | 
|  | * check for that as well. | 
|  | */ | 
|  | BUG_ON(lpar_rc != H_NOT_FOUND && lpar_rc != H_RESOURCE); | 
|  |  | 
|  | slot_offset++; | 
|  | slot_offset &= 0x7; | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void manual_hpte_clear_all(void) | 
|  | { | 
|  | unsigned long size_bytes = 1UL << ppc64_pft_size; | 
|  | unsigned long hpte_count = size_bytes >> 4; | 
|  | struct { | 
|  | unsigned long pteh; | 
|  | unsigned long ptel; | 
|  | } ptes[4]; | 
|  | long lpar_rc; | 
|  | unsigned long i, j; | 
|  |  | 
|  | /* Read in batches of 4, | 
|  | * invalidate only valid entries not in the VRMA | 
|  | * hpte_count will be a multiple of 4 | 
|  | */ | 
|  | for (i = 0; i < hpte_count; i += 4) { | 
|  | lpar_rc = plpar_pte_read_4_raw(0, i, (void *)ptes); | 
|  | if (lpar_rc != H_SUCCESS) { | 
|  | pr_info("Failed to read hash page table at %ld err %ld\n", | 
|  | i, lpar_rc); | 
|  | continue; | 
|  | } | 
|  | for (j = 0; j < 4; j++){ | 
|  | if ((ptes[j].pteh & HPTE_V_VRMA_MASK) == | 
|  | HPTE_V_VRMA_MASK) | 
|  | continue; | 
|  | if (ptes[j].pteh & HPTE_V_VALID) | 
|  | plpar_pte_remove_raw(0, i + j, 0, | 
|  | &(ptes[j].pteh), &(ptes[j].ptel)); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int hcall_hpte_clear_all(void) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | do { | 
|  | rc = plpar_hcall_norets(H_CLEAR_HPT); | 
|  | } while (rc == H_CONTINUE); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void pseries_hpte_clear_all(void) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | rc = hcall_hpte_clear_all(); | 
|  | if (rc != H_SUCCESS) | 
|  | manual_hpte_clear_all(); | 
|  |  | 
|  | #ifdef __LITTLE_ENDIAN__ | 
|  | /* | 
|  | * Reset exceptions to big endian. | 
|  | * | 
|  | * FIXME this is a hack for kexec, we need to reset the exception | 
|  | * endian before starting the new kernel and this is a convenient place | 
|  | * to do it. | 
|  | * | 
|  | * This is also called on boot when a fadump happens. In that case we | 
|  | * must not change the exception endian mode. | 
|  | */ | 
|  | if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) | 
|  | pseries_big_endian_exceptions(); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and | 
|  | * the low 3 bits of flags happen to line up.  So no transform is needed. | 
|  | * We can probably optimize here and assume the high bits of newpp are | 
|  | * already zero.  For now I am paranoid. | 
|  | */ | 
|  | static long pSeries_lpar_hpte_updatepp(unsigned long slot, | 
|  | unsigned long newpp, | 
|  | unsigned long vpn, | 
|  | int psize, int apsize, | 
|  | int ssize, unsigned long inv_flags) | 
|  | { | 
|  | unsigned long lpar_rc; | 
|  | unsigned long flags; | 
|  | unsigned long want_v; | 
|  |  | 
|  | want_v = hpte_encode_avpn(vpn, psize, ssize); | 
|  |  | 
|  | flags = (newpp & 7) | H_AVPN; | 
|  | if (mmu_has_feature(MMU_FTR_KERNEL_RO)) | 
|  | /* Move pp0 into bit 8 (IBM 55) */ | 
|  | flags |= (newpp & HPTE_R_PP0) >> 55; | 
|  |  | 
|  | pr_devel("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...", | 
|  | want_v, slot, flags, psize); | 
|  |  | 
|  | lpar_rc = plpar_pte_protect(flags, slot, want_v); | 
|  |  | 
|  | if (lpar_rc == H_NOT_FOUND) { | 
|  | pr_devel("not found !\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | pr_devel("ok\n"); | 
|  |  | 
|  | BUG_ON(lpar_rc != H_SUCCESS); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static long __pSeries_lpar_hpte_find(unsigned long want_v, unsigned long hpte_group) | 
|  | { | 
|  | long lpar_rc; | 
|  | unsigned long i, j; | 
|  | struct { | 
|  | unsigned long pteh; | 
|  | unsigned long ptel; | 
|  | } ptes[4]; | 
|  |  | 
|  | for (i = 0; i < HPTES_PER_GROUP; i += 4, hpte_group += 4) { | 
|  |  | 
|  | lpar_rc = plpar_pte_read_4(0, hpte_group, (void *)ptes); | 
|  | if (lpar_rc != H_SUCCESS) { | 
|  | pr_info("Failed to read hash page table at %ld err %ld\n", | 
|  | hpte_group, lpar_rc); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | for (j = 0; j < 4; j++) { | 
|  | if (HPTE_V_COMPARE(ptes[j].pteh, want_v) && | 
|  | (ptes[j].pteh & HPTE_V_VALID)) | 
|  | return i + j; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static long pSeries_lpar_hpte_find(unsigned long vpn, int psize, int ssize) | 
|  | { | 
|  | long slot; | 
|  | unsigned long hash; | 
|  | unsigned long want_v; | 
|  | unsigned long hpte_group; | 
|  |  | 
|  | hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize); | 
|  | want_v = hpte_encode_avpn(vpn, psize, ssize); | 
|  |  | 
|  | /* Bolted entries are always in the primary group */ | 
|  | hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP; | 
|  | slot = __pSeries_lpar_hpte_find(want_v, hpte_group); | 
|  | if (slot < 0) | 
|  | return -1; | 
|  | return hpte_group + slot; | 
|  | } | 
|  |  | 
|  | static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp, | 
|  | unsigned long ea, | 
|  | int psize, int ssize) | 
|  | { | 
|  | unsigned long vpn; | 
|  | unsigned long lpar_rc, slot, vsid, flags; | 
|  |  | 
|  | vsid = get_kernel_vsid(ea, ssize); | 
|  | vpn = hpt_vpn(ea, vsid, ssize); | 
|  |  | 
|  | slot = pSeries_lpar_hpte_find(vpn, psize, ssize); | 
|  | BUG_ON(slot == -1); | 
|  |  | 
|  | flags = newpp & 7; | 
|  | if (mmu_has_feature(MMU_FTR_KERNEL_RO)) | 
|  | /* Move pp0 into bit 8 (IBM 55) */ | 
|  | flags |= (newpp & HPTE_R_PP0) >> 55; | 
|  |  | 
|  | lpar_rc = plpar_pte_protect(flags, slot, 0); | 
|  |  | 
|  | BUG_ON(lpar_rc != H_SUCCESS); | 
|  | } | 
|  |  | 
|  | static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn, | 
|  | int psize, int apsize, | 
|  | int ssize, int local) | 
|  | { | 
|  | unsigned long want_v; | 
|  | unsigned long lpar_rc; | 
|  | unsigned long dummy1, dummy2; | 
|  |  | 
|  | pr_devel("    inval : slot=%lx, vpn=%016lx, psize: %d, local: %d\n", | 
|  | slot, vpn, psize, local); | 
|  |  | 
|  | want_v = hpte_encode_avpn(vpn, psize, ssize); | 
|  | lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v, &dummy1, &dummy2); | 
|  | if (lpar_rc == H_NOT_FOUND) | 
|  | return; | 
|  |  | 
|  | BUG_ON(lpar_rc != H_SUCCESS); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * As defined in the PAPR's section 14.5.4.1.8 | 
|  | * The control mask doesn't include the returned reference and change bit from | 
|  | * the processed PTE. | 
|  | */ | 
|  | #define HBLKR_AVPN		0x0100000000000000UL | 
|  | #define HBLKR_CTRL_MASK		0xf800000000000000UL | 
|  | #define HBLKR_CTRL_SUCCESS	0x8000000000000000UL | 
|  | #define HBLKR_CTRL_ERRNOTFOUND	0x8800000000000000UL | 
|  | #define HBLKR_CTRL_ERRBUSY	0xa000000000000000UL | 
|  |  | 
|  | /* | 
|  | * Returned true if we are supporting this block size for the specified segment | 
|  | * base page size and actual page size. | 
|  | * | 
|  | * Currently, we only support 8 size block. | 
|  | */ | 
|  | static inline bool is_supported_hlbkrm(int bpsize, int psize) | 
|  | { | 
|  | return (hblkrm_size[bpsize][psize] == HBLKRM_SUPPORTED_BLOCK_SIZE); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * H_BLOCK_REMOVE caller. | 
|  | * @idx should point to the latest @param entry set with a PTEX. | 
|  | * If PTE cannot be processed because another CPUs has already locked that | 
|  | * group, those entries are put back in @param starting at index 1. | 
|  | * If entries has to be retried and @retry_busy is set to true, these entries | 
|  | * are retried until success. If @retry_busy is set to false, the returned | 
|  | * is the number of entries yet to process. | 
|  | */ | 
|  | static unsigned long call_block_remove(unsigned long idx, unsigned long *param, | 
|  | bool retry_busy) | 
|  | { | 
|  | unsigned long i, rc, new_idx; | 
|  | unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; | 
|  |  | 
|  | if (idx < 2) { | 
|  | pr_warn("Unexpected empty call to H_BLOCK_REMOVE"); | 
|  | return 0; | 
|  | } | 
|  | again: | 
|  | new_idx = 0; | 
|  | if (idx > PLPAR_HCALL9_BUFSIZE) { | 
|  | pr_err("Too many PTEs (%lu) for H_BLOCK_REMOVE", idx); | 
|  | idx = PLPAR_HCALL9_BUFSIZE; | 
|  | } else if (idx < PLPAR_HCALL9_BUFSIZE) | 
|  | param[idx] = HBR_END; | 
|  |  | 
|  | rc = plpar_hcall9(H_BLOCK_REMOVE, retbuf, | 
|  | param[0], /* AVA */ | 
|  | param[1],  param[2],  param[3],  param[4], /* TS0-7 */ | 
|  | param[5],  param[6],  param[7],  param[8]); | 
|  | if (rc == H_SUCCESS) | 
|  | return 0; | 
|  |  | 
|  | BUG_ON(rc != H_PARTIAL); | 
|  |  | 
|  | /* Check that the unprocessed entries were 'not found' or 'busy' */ | 
|  | for (i = 0; i < idx-1; i++) { | 
|  | unsigned long ctrl = retbuf[i] & HBLKR_CTRL_MASK; | 
|  |  | 
|  | if (ctrl == HBLKR_CTRL_ERRBUSY) { | 
|  | param[++new_idx] = param[i+1]; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | BUG_ON(ctrl != HBLKR_CTRL_SUCCESS | 
|  | && ctrl != HBLKR_CTRL_ERRNOTFOUND); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If there were entries found busy, retry these entries if requested, | 
|  | * of if all the entries have to be retried. | 
|  | */ | 
|  | if (new_idx && (retry_busy || new_idx == (PLPAR_HCALL9_BUFSIZE-1))) { | 
|  | idx = new_idx + 1; | 
|  | goto again; | 
|  | } | 
|  |  | 
|  | return new_idx; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_TRANSPARENT_HUGEPAGE | 
|  | /* | 
|  | * Limit iterations holding pSeries_lpar_tlbie_lock to 3. We also need | 
|  | * to make sure that we avoid bouncing the hypervisor tlbie lock. | 
|  | */ | 
|  | #define PPC64_HUGE_HPTE_BATCH 12 | 
|  |  | 
|  | static void hugepage_block_invalidate(unsigned long *slot, unsigned long *vpn, | 
|  | int count, int psize, int ssize) | 
|  | { | 
|  | unsigned long param[PLPAR_HCALL9_BUFSIZE]; | 
|  | unsigned long shift, current_vpgb, vpgb; | 
|  | int i, pix = 0; | 
|  |  | 
|  | shift = mmu_psize_defs[psize].shift; | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  | /* | 
|  | * Shifting 3 bits more on the right to get a | 
|  | * 8 pages aligned virtual addresse. | 
|  | */ | 
|  | vpgb = (vpn[i] >> (shift - VPN_SHIFT + 3)); | 
|  | if (!pix || vpgb != current_vpgb) { | 
|  | /* | 
|  | * Need to start a new 8 pages block, flush | 
|  | * the current one if needed. | 
|  | */ | 
|  | if (pix) | 
|  | (void)call_block_remove(pix, param, true); | 
|  | current_vpgb = vpgb; | 
|  | param[0] = hpte_encode_avpn(vpn[i], psize, ssize); | 
|  | pix = 1; | 
|  | } | 
|  |  | 
|  | param[pix++] = HBR_REQUEST | HBLKR_AVPN | slot[i]; | 
|  | if (pix == PLPAR_HCALL9_BUFSIZE) { | 
|  | pix = call_block_remove(pix, param, false); | 
|  | /* | 
|  | * pix = 0 means that all the entries were | 
|  | * removed, we can start a new block. | 
|  | * Otherwise, this means that there are entries | 
|  | * to retry, and pix points to latest one, so | 
|  | * we should increment it and try to continue | 
|  | * the same block. | 
|  | */ | 
|  | if (pix) | 
|  | pix++; | 
|  | } | 
|  | } | 
|  | if (pix) | 
|  | (void)call_block_remove(pix, param, true); | 
|  | } | 
|  |  | 
|  | static void hugepage_bulk_invalidate(unsigned long *slot, unsigned long *vpn, | 
|  | int count, int psize, int ssize) | 
|  | { | 
|  | unsigned long param[PLPAR_HCALL9_BUFSIZE]; | 
|  | int i = 0, pix = 0, rc; | 
|  |  | 
|  | for (i = 0; i < count; i++) { | 
|  |  | 
|  | if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) { | 
|  | pSeries_lpar_hpte_invalidate(slot[i], vpn[i], psize, 0, | 
|  | ssize, 0); | 
|  | } else { | 
|  | param[pix] = HBR_REQUEST | HBR_AVPN | slot[i]; | 
|  | param[pix+1] = hpte_encode_avpn(vpn[i], psize, ssize); | 
|  | pix += 2; | 
|  | if (pix == 8) { | 
|  | rc = plpar_hcall9(H_BULK_REMOVE, param, | 
|  | param[0], param[1], param[2], | 
|  | param[3], param[4], param[5], | 
|  | param[6], param[7]); | 
|  | BUG_ON(rc != H_SUCCESS); | 
|  | pix = 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (pix) { | 
|  | param[pix] = HBR_END; | 
|  | rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1], | 
|  | param[2], param[3], param[4], param[5], | 
|  | param[6], param[7]); | 
|  | BUG_ON(rc != H_SUCCESS); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void __pSeries_lpar_hugepage_invalidate(unsigned long *slot, | 
|  | unsigned long *vpn, | 
|  | int count, int psize, | 
|  | int ssize) | 
|  | { | 
|  | unsigned long flags = 0; | 
|  | int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE); | 
|  |  | 
|  | if (lock_tlbie) | 
|  | spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags); | 
|  |  | 
|  | /* Assuming THP size is 16M */ | 
|  | if (is_supported_hlbkrm(psize, MMU_PAGE_16M)) | 
|  | hugepage_block_invalidate(slot, vpn, count, psize, ssize); | 
|  | else | 
|  | hugepage_bulk_invalidate(slot, vpn, count, psize, ssize); | 
|  |  | 
|  | if (lock_tlbie) | 
|  | spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); | 
|  | } | 
|  |  | 
|  | static void pSeries_lpar_hugepage_invalidate(unsigned long vsid, | 
|  | unsigned long addr, | 
|  | unsigned char *hpte_slot_array, | 
|  | int psize, int ssize, int local) | 
|  | { | 
|  | int i, index = 0; | 
|  | unsigned long s_addr = addr; | 
|  | unsigned int max_hpte_count, valid; | 
|  | unsigned long vpn_array[PPC64_HUGE_HPTE_BATCH]; | 
|  | unsigned long slot_array[PPC64_HUGE_HPTE_BATCH]; | 
|  | unsigned long shift, hidx, vpn = 0, hash, slot; | 
|  |  | 
|  | shift = mmu_psize_defs[psize].shift; | 
|  | max_hpte_count = 1U << (PMD_SHIFT - shift); | 
|  |  | 
|  | for (i = 0; i < max_hpte_count; i++) { | 
|  | valid = hpte_valid(hpte_slot_array, i); | 
|  | if (!valid) | 
|  | continue; | 
|  | hidx =  hpte_hash_index(hpte_slot_array, i); | 
|  |  | 
|  | /* get the vpn */ | 
|  | addr = s_addr + (i * (1ul << shift)); | 
|  | vpn = hpt_vpn(addr, vsid, ssize); | 
|  | hash = hpt_hash(vpn, shift, ssize); | 
|  | if (hidx & _PTEIDX_SECONDARY) | 
|  | hash = ~hash; | 
|  |  | 
|  | slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; | 
|  | slot += hidx & _PTEIDX_GROUP_IX; | 
|  |  | 
|  | slot_array[index] = slot; | 
|  | vpn_array[index] = vpn; | 
|  | if (index == PPC64_HUGE_HPTE_BATCH - 1) { | 
|  | /* | 
|  | * Now do a bluk invalidate | 
|  | */ | 
|  | __pSeries_lpar_hugepage_invalidate(slot_array, | 
|  | vpn_array, | 
|  | PPC64_HUGE_HPTE_BATCH, | 
|  | psize, ssize); | 
|  | index = 0; | 
|  | } else | 
|  | index++; | 
|  | } | 
|  | if (index) | 
|  | __pSeries_lpar_hugepage_invalidate(slot_array, vpn_array, | 
|  | index, psize, ssize); | 
|  | } | 
|  | #else | 
|  | static void pSeries_lpar_hugepage_invalidate(unsigned long vsid, | 
|  | unsigned long addr, | 
|  | unsigned char *hpte_slot_array, | 
|  | int psize, int ssize, int local) | 
|  | { | 
|  | WARN(1, "%s called without THP support\n", __func__); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int pSeries_lpar_hpte_removebolted(unsigned long ea, | 
|  | int psize, int ssize) | 
|  | { | 
|  | unsigned long vpn; | 
|  | unsigned long slot, vsid; | 
|  |  | 
|  | vsid = get_kernel_vsid(ea, ssize); | 
|  | vpn = hpt_vpn(ea, vsid, ssize); | 
|  |  | 
|  | slot = pSeries_lpar_hpte_find(vpn, psize, ssize); | 
|  | if (slot == -1) | 
|  | return -ENOENT; | 
|  |  | 
|  | /* | 
|  | * lpar doesn't use the passed actual page size | 
|  | */ | 
|  | pSeries_lpar_hpte_invalidate(slot, vpn, psize, 0, ssize, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline unsigned long compute_slot(real_pte_t pte, | 
|  | unsigned long vpn, | 
|  | unsigned long index, | 
|  | unsigned long shift, | 
|  | int ssize) | 
|  | { | 
|  | unsigned long slot, hash, hidx; | 
|  |  | 
|  | hash = hpt_hash(vpn, shift, ssize); | 
|  | hidx = __rpte_to_hidx(pte, index); | 
|  | if (hidx & _PTEIDX_SECONDARY) | 
|  | hash = ~hash; | 
|  | slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; | 
|  | slot += hidx & _PTEIDX_GROUP_IX; | 
|  | return slot; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * The hcall H_BLOCK_REMOVE implies that the virtual pages to processed are | 
|  | * "all within the same naturally aligned 8 page virtual address block". | 
|  | */ | 
|  | static void do_block_remove(unsigned long number, struct ppc64_tlb_batch *batch, | 
|  | unsigned long *param) | 
|  | { | 
|  | unsigned long vpn; | 
|  | unsigned long i, pix = 0; | 
|  | unsigned long index, shift, slot, current_vpgb, vpgb; | 
|  | real_pte_t pte; | 
|  | int psize, ssize; | 
|  |  | 
|  | psize = batch->psize; | 
|  | ssize = batch->ssize; | 
|  |  | 
|  | for (i = 0; i < number; i++) { | 
|  | vpn = batch->vpn[i]; | 
|  | pte = batch->pte[i]; | 
|  | pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) { | 
|  | /* | 
|  | * Shifting 3 bits more on the right to get a | 
|  | * 8 pages aligned virtual addresse. | 
|  | */ | 
|  | vpgb = (vpn >> (shift - VPN_SHIFT + 3)); | 
|  | if (!pix || vpgb != current_vpgb) { | 
|  | /* | 
|  | * Need to start a new 8 pages block, flush | 
|  | * the current one if needed. | 
|  | */ | 
|  | if (pix) | 
|  | (void)call_block_remove(pix, param, | 
|  | true); | 
|  | current_vpgb = vpgb; | 
|  | param[0] = hpte_encode_avpn(vpn, psize, | 
|  | ssize); | 
|  | pix = 1; | 
|  | } | 
|  |  | 
|  | slot = compute_slot(pte, vpn, index, shift, ssize); | 
|  | param[pix++] = HBR_REQUEST | HBLKR_AVPN | slot; | 
|  |  | 
|  | if (pix == PLPAR_HCALL9_BUFSIZE) { | 
|  | pix = call_block_remove(pix, param, false); | 
|  | /* | 
|  | * pix = 0 means that all the entries were | 
|  | * removed, we can start a new block. | 
|  | * Otherwise, this means that there are entries | 
|  | * to retry, and pix points to latest one, so | 
|  | * we should increment it and try to continue | 
|  | * the same block. | 
|  | */ | 
|  | if (pix) | 
|  | pix++; | 
|  | } | 
|  | } pte_iterate_hashed_end(); | 
|  | } | 
|  |  | 
|  | if (pix) | 
|  | (void)call_block_remove(pix, param, true); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TLB Block Invalidate Characteristics | 
|  | * | 
|  | * These characteristics define the size of the block the hcall H_BLOCK_REMOVE | 
|  | * is able to process for each couple segment base page size, actual page size. | 
|  | * | 
|  | * The ibm,get-system-parameter properties is returning a buffer with the | 
|  | * following layout: | 
|  | * | 
|  | * [ 2 bytes size of the RTAS buffer (excluding these 2 bytes) ] | 
|  | * ----------------- | 
|  | * TLB Block Invalidate Specifiers: | 
|  | * [ 1 byte LOG base 2 of the TLB invalidate block size being specified ] | 
|  | * [ 1 byte Number of page sizes (N) that are supported for the specified | 
|  | *          TLB invalidate block size ] | 
|  | * [ 1 byte Encoded segment base page size and actual page size | 
|  | *          MSB=0 means 4k segment base page size and actual page size | 
|  | *          MSB=1 the penc value in mmu_psize_def ] | 
|  | * ... | 
|  | * ----------------- | 
|  | * Next TLB Block Invalidate Specifiers... | 
|  | * ----------------- | 
|  | * [ 0 ] | 
|  | */ | 
|  | static inline void set_hblkrm_bloc_size(int bpsize, int psize, | 
|  | unsigned int block_size) | 
|  | { | 
|  | if (block_size > hblkrm_size[bpsize][psize]) | 
|  | hblkrm_size[bpsize][psize] = block_size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Decode the Encoded segment base page size and actual page size. | 
|  | * PAPR specifies: | 
|  | *   - bit 7 is the L bit | 
|  | *   - bits 0-5 are the penc value | 
|  | * If the L bit is 0, this means 4K segment base page size and actual page size | 
|  | * otherwise the penc value should be read. | 
|  | */ | 
|  | #define HBLKRM_L_MASK		0x80 | 
|  | #define HBLKRM_PENC_MASK	0x3f | 
|  | static inline void __init check_lp_set_hblkrm(unsigned int lp, | 
|  | unsigned int block_size) | 
|  | { | 
|  | unsigned int bpsize, psize; | 
|  |  | 
|  | /* First, check the L bit, if not set, this means 4K */ | 
|  | if ((lp & HBLKRM_L_MASK) == 0) { | 
|  | set_hblkrm_bloc_size(MMU_PAGE_4K, MMU_PAGE_4K, block_size); | 
|  | return; | 
|  | } | 
|  |  | 
|  | lp &= HBLKRM_PENC_MASK; | 
|  | for (bpsize = 0; bpsize < MMU_PAGE_COUNT; bpsize++) { | 
|  | struct mmu_psize_def *def = &mmu_psize_defs[bpsize]; | 
|  |  | 
|  | for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { | 
|  | if (def->penc[psize] == lp) { | 
|  | set_hblkrm_bloc_size(bpsize, psize, block_size); | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #define SPLPAR_TLB_BIC_TOKEN		50 | 
|  |  | 
|  | /* | 
|  | * The size of the TLB Block Invalidate Characteristics is variable. But at the | 
|  | * maximum it will be the number of possible page sizes *2 + 10 bytes. | 
|  | * Currently MMU_PAGE_COUNT is 16, which means 42 bytes. Use a cache line size | 
|  | * (128 bytes) for the buffer to get plenty of space. | 
|  | */ | 
|  | #define SPLPAR_TLB_BIC_MAXLENGTH	128 | 
|  |  | 
|  | void __init pseries_lpar_read_hblkrm_characteristics(void) | 
|  | { | 
|  | unsigned char local_buffer[SPLPAR_TLB_BIC_MAXLENGTH]; | 
|  | int call_status, len, idx, bpsize; | 
|  |  | 
|  | if (!firmware_has_feature(FW_FEATURE_BLOCK_REMOVE)) | 
|  | return; | 
|  |  | 
|  | spin_lock(&rtas_data_buf_lock); | 
|  | memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE); | 
|  | call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, | 
|  | NULL, | 
|  | SPLPAR_TLB_BIC_TOKEN, | 
|  | __pa(rtas_data_buf), | 
|  | RTAS_DATA_BUF_SIZE); | 
|  | memcpy(local_buffer, rtas_data_buf, SPLPAR_TLB_BIC_MAXLENGTH); | 
|  | local_buffer[SPLPAR_TLB_BIC_MAXLENGTH - 1] = '\0'; | 
|  | spin_unlock(&rtas_data_buf_lock); | 
|  |  | 
|  | if (call_status != 0) { | 
|  | pr_warn("%s %s Error calling get-system-parameter (0x%x)\n", | 
|  | __FILE__, __func__, call_status); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The first two (2) bytes of the data in the buffer are the length of | 
|  | * the returned data, not counting these first two (2) bytes. | 
|  | */ | 
|  | len = be16_to_cpu(*((u16 *)local_buffer)) + 2; | 
|  | if (len > SPLPAR_TLB_BIC_MAXLENGTH) { | 
|  | pr_warn("%s too large returned buffer %d", __func__, len); | 
|  | return; | 
|  | } | 
|  |  | 
|  | idx = 2; | 
|  | while (idx < len) { | 
|  | u8 block_shift = local_buffer[idx++]; | 
|  | u32 block_size; | 
|  | unsigned int npsize; | 
|  |  | 
|  | if (!block_shift) | 
|  | break; | 
|  |  | 
|  | block_size = 1 << block_shift; | 
|  |  | 
|  | for (npsize = local_buffer[idx++]; | 
|  | npsize > 0 && idx < len; npsize--) | 
|  | check_lp_set_hblkrm((unsigned int) local_buffer[idx++], | 
|  | block_size); | 
|  | } | 
|  |  | 
|  | for (bpsize = 0; bpsize < MMU_PAGE_COUNT; bpsize++) | 
|  | for (idx = 0; idx < MMU_PAGE_COUNT; idx++) | 
|  | if (hblkrm_size[bpsize][idx]) | 
|  | pr_info("H_BLOCK_REMOVE supports base psize:%d psize:%d block size:%d", | 
|  | bpsize, idx, hblkrm_size[bpsize][idx]); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie | 
|  | * lock. | 
|  | */ | 
|  | static void pSeries_lpar_flush_hash_range(unsigned long number, int local) | 
|  | { | 
|  | unsigned long vpn; | 
|  | unsigned long i, pix, rc; | 
|  | unsigned long flags = 0; | 
|  | struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch); | 
|  | int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE); | 
|  | unsigned long param[PLPAR_HCALL9_BUFSIZE]; | 
|  | unsigned long index, shift, slot; | 
|  | real_pte_t pte; | 
|  | int psize, ssize; | 
|  |  | 
|  | if (lock_tlbie) | 
|  | spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags); | 
|  |  | 
|  | if (is_supported_hlbkrm(batch->psize, batch->psize)) { | 
|  | do_block_remove(number, batch, param); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | psize = batch->psize; | 
|  | ssize = batch->ssize; | 
|  | pix = 0; | 
|  | for (i = 0; i < number; i++) { | 
|  | vpn = batch->vpn[i]; | 
|  | pte = batch->pte[i]; | 
|  | pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) { | 
|  | slot = compute_slot(pte, vpn, index, shift, ssize); | 
|  | if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) { | 
|  | /* | 
|  | * lpar doesn't use the passed actual page size | 
|  | */ | 
|  | pSeries_lpar_hpte_invalidate(slot, vpn, psize, | 
|  | 0, ssize, local); | 
|  | } else { | 
|  | param[pix] = HBR_REQUEST | HBR_AVPN | slot; | 
|  | param[pix+1] = hpte_encode_avpn(vpn, psize, | 
|  | ssize); | 
|  | pix += 2; | 
|  | if (pix == 8) { | 
|  | rc = plpar_hcall9(H_BULK_REMOVE, param, | 
|  | param[0], param[1], param[2], | 
|  | param[3], param[4], param[5], | 
|  | param[6], param[7]); | 
|  | BUG_ON(rc != H_SUCCESS); | 
|  | pix = 0; | 
|  | } | 
|  | } | 
|  | } pte_iterate_hashed_end(); | 
|  | } | 
|  | if (pix) { | 
|  | param[pix] = HBR_END; | 
|  | rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1], | 
|  | param[2], param[3], param[4], param[5], | 
|  | param[6], param[7]); | 
|  | BUG_ON(rc != H_SUCCESS); | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (lock_tlbie) | 
|  | spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); | 
|  | } | 
|  |  | 
|  | static int __init disable_bulk_remove(char *str) | 
|  | { | 
|  | if (strcmp(str, "off") == 0 && | 
|  | firmware_has_feature(FW_FEATURE_BULK_REMOVE)) { | 
|  | pr_info("Disabling BULK_REMOVE firmware feature"); | 
|  | powerpc_firmware_features &= ~FW_FEATURE_BULK_REMOVE; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("bulk_remove=", disable_bulk_remove); | 
|  |  | 
|  | #define HPT_RESIZE_TIMEOUT	10000 /* ms */ | 
|  |  | 
|  | struct hpt_resize_state { | 
|  | unsigned long shift; | 
|  | int commit_rc; | 
|  | }; | 
|  |  | 
|  | static int pseries_lpar_resize_hpt_commit(void *data) | 
|  | { | 
|  | struct hpt_resize_state *state = data; | 
|  |  | 
|  | state->commit_rc = plpar_resize_hpt_commit(0, state->shift); | 
|  | if (state->commit_rc != H_SUCCESS) | 
|  | return -EIO; | 
|  |  | 
|  | /* Hypervisor has transitioned the HTAB, update our globals */ | 
|  | ppc64_pft_size = state->shift; | 
|  | htab_size_bytes = 1UL << ppc64_pft_size; | 
|  | htab_hash_mask = (htab_size_bytes >> 7) - 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Must be called in process context. The caller must hold the | 
|  | * cpus_lock. | 
|  | */ | 
|  | static int pseries_lpar_resize_hpt(unsigned long shift) | 
|  | { | 
|  | struct hpt_resize_state state = { | 
|  | .shift = shift, | 
|  | .commit_rc = H_FUNCTION, | 
|  | }; | 
|  | unsigned int delay, total_delay = 0; | 
|  | int rc; | 
|  | ktime_t t0, t1, t2; | 
|  |  | 
|  | might_sleep(); | 
|  |  | 
|  | if (!firmware_has_feature(FW_FEATURE_HPT_RESIZE)) | 
|  | return -ENODEV; | 
|  |  | 
|  | pr_info("Attempting to resize HPT to shift %lu\n", shift); | 
|  |  | 
|  | t0 = ktime_get(); | 
|  |  | 
|  | rc = plpar_resize_hpt_prepare(0, shift); | 
|  | while (H_IS_LONG_BUSY(rc)) { | 
|  | delay = get_longbusy_msecs(rc); | 
|  | total_delay += delay; | 
|  | if (total_delay > HPT_RESIZE_TIMEOUT) { | 
|  | /* prepare with shift==0 cancels an in-progress resize */ | 
|  | rc = plpar_resize_hpt_prepare(0, 0); | 
|  | if (rc != H_SUCCESS) | 
|  | pr_warn("Unexpected error %d cancelling timed out HPT resize\n", | 
|  | rc); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  | msleep(delay); | 
|  | rc = plpar_resize_hpt_prepare(0, shift); | 
|  | }; | 
|  |  | 
|  | switch (rc) { | 
|  | case H_SUCCESS: | 
|  | /* Continue on */ | 
|  | break; | 
|  |  | 
|  | case H_PARAMETER: | 
|  | pr_warn("Invalid argument from H_RESIZE_HPT_PREPARE\n"); | 
|  | return -EINVAL; | 
|  | case H_RESOURCE: | 
|  | pr_warn("Operation not permitted from H_RESIZE_HPT_PREPARE\n"); | 
|  | return -EPERM; | 
|  | default: | 
|  | pr_warn("Unexpected error %d from H_RESIZE_HPT_PREPARE\n", rc); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | t1 = ktime_get(); | 
|  |  | 
|  | rc = stop_machine_cpuslocked(pseries_lpar_resize_hpt_commit, | 
|  | &state, NULL); | 
|  |  | 
|  | t2 = ktime_get(); | 
|  |  | 
|  | if (rc != 0) { | 
|  | switch (state.commit_rc) { | 
|  | case H_PTEG_FULL: | 
|  | return -ENOSPC; | 
|  |  | 
|  | default: | 
|  | pr_warn("Unexpected error %d from H_RESIZE_HPT_COMMIT\n", | 
|  | state.commit_rc); | 
|  | return -EIO; | 
|  | }; | 
|  | } | 
|  |  | 
|  | pr_info("HPT resize to shift %lu complete (%lld ms / %lld ms)\n", | 
|  | shift, (long long) ktime_ms_delta(t1, t0), | 
|  | (long long) ktime_ms_delta(t2, t1)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pseries_lpar_register_process_table(unsigned long base, | 
|  | unsigned long page_size, unsigned long table_size) | 
|  | { | 
|  | long rc; | 
|  | unsigned long flags = 0; | 
|  |  | 
|  | if (table_size) | 
|  | flags |= PROC_TABLE_NEW; | 
|  | if (radix_enabled()) | 
|  | flags |= PROC_TABLE_RADIX | PROC_TABLE_GTSE; | 
|  | else | 
|  | flags |= PROC_TABLE_HPT_SLB; | 
|  | for (;;) { | 
|  | rc = plpar_hcall_norets(H_REGISTER_PROC_TBL, flags, base, | 
|  | page_size, table_size); | 
|  | if (!H_IS_LONG_BUSY(rc)) | 
|  | break; | 
|  | mdelay(get_longbusy_msecs(rc)); | 
|  | } | 
|  | if (rc != H_SUCCESS) { | 
|  | pr_err("Failed to register process table (rc=%ld)\n", rc); | 
|  | BUG(); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | void __init hpte_init_pseries(void) | 
|  | { | 
|  | mmu_hash_ops.hpte_invalidate	 = pSeries_lpar_hpte_invalidate; | 
|  | mmu_hash_ops.hpte_updatepp	 = pSeries_lpar_hpte_updatepp; | 
|  | mmu_hash_ops.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp; | 
|  | mmu_hash_ops.hpte_insert	 = pSeries_lpar_hpte_insert; | 
|  | mmu_hash_ops.hpte_remove	 = pSeries_lpar_hpte_remove; | 
|  | mmu_hash_ops.hpte_removebolted   = pSeries_lpar_hpte_removebolted; | 
|  | mmu_hash_ops.flush_hash_range	 = pSeries_lpar_flush_hash_range; | 
|  | mmu_hash_ops.hpte_clear_all      = pseries_hpte_clear_all; | 
|  | mmu_hash_ops.hugepage_invalidate = pSeries_lpar_hugepage_invalidate; | 
|  |  | 
|  | if (firmware_has_feature(FW_FEATURE_HPT_RESIZE)) | 
|  | mmu_hash_ops.resize_hpt = pseries_lpar_resize_hpt; | 
|  |  | 
|  | /* | 
|  | * On POWER9, we need to do a H_REGISTER_PROC_TBL hcall | 
|  | * to inform the hypervisor that we wish to use the HPT. | 
|  | */ | 
|  | if (cpu_has_feature(CPU_FTR_ARCH_300)) | 
|  | pseries_lpar_register_process_table(0, 0, 0); | 
|  | } | 
|  |  | 
|  | void radix_init_pseries(void) | 
|  | { | 
|  | pr_info("Using radix MMU under hypervisor\n"); | 
|  |  | 
|  | pseries_lpar_register_process_table(__pa(process_tb), | 
|  | 0, PRTB_SIZE_SHIFT - 12); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_SMLPAR | 
|  | #define CMO_FREE_HINT_DEFAULT 1 | 
|  | static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT; | 
|  |  | 
|  | static int __init cmo_free_hint(char *str) | 
|  | { | 
|  | char *parm; | 
|  | parm = strstrip(str); | 
|  |  | 
|  | if (strcasecmp(parm, "no") == 0 || strcasecmp(parm, "off") == 0) { | 
|  | pr_info("%s: CMO free page hinting is not active.\n", __func__); | 
|  | cmo_free_hint_flag = 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | cmo_free_hint_flag = 1; | 
|  | pr_info("%s: CMO free page hinting is active.\n", __func__); | 
|  |  | 
|  | if (strcasecmp(parm, "yes") == 0 || strcasecmp(parm, "on") == 0) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | __setup("cmo_free_hint=", cmo_free_hint); | 
|  |  | 
|  | static void pSeries_set_page_state(struct page *page, int order, | 
|  | unsigned long state) | 
|  | { | 
|  | int i, j; | 
|  | unsigned long cmo_page_sz, addr; | 
|  |  | 
|  | cmo_page_sz = cmo_get_page_size(); | 
|  | addr = __pa((unsigned long)page_address(page)); | 
|  |  | 
|  | for (i = 0; i < (1 << order); i++, addr += PAGE_SIZE) { | 
|  | for (j = 0; j < PAGE_SIZE; j += cmo_page_sz) | 
|  | plpar_hcall_norets(H_PAGE_INIT, state, addr + j, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | void arch_free_page(struct page *page, int order) | 
|  | { | 
|  | if (radix_enabled()) | 
|  | return; | 
|  | if (!cmo_free_hint_flag || !firmware_has_feature(FW_FEATURE_CMO)) | 
|  | return; | 
|  |  | 
|  | pSeries_set_page_state(page, order, H_PAGE_SET_UNUSED); | 
|  | } | 
|  | EXPORT_SYMBOL(arch_free_page); | 
|  |  | 
|  | #endif /* CONFIG_PPC_SMLPAR */ | 
|  | #endif /* CONFIG_PPC_BOOK3S_64 */ | 
|  |  | 
|  | #ifdef CONFIG_TRACEPOINTS | 
|  | #ifdef CONFIG_JUMP_LABEL | 
|  | struct static_key hcall_tracepoint_key = STATIC_KEY_INIT; | 
|  |  | 
|  | int hcall_tracepoint_regfunc(void) | 
|  | { | 
|  | static_key_slow_inc(&hcall_tracepoint_key); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void hcall_tracepoint_unregfunc(void) | 
|  | { | 
|  | static_key_slow_dec(&hcall_tracepoint_key); | 
|  | } | 
|  | #else | 
|  | /* | 
|  | * We optimise our hcall path by placing hcall_tracepoint_refcount | 
|  | * directly in the TOC so we can check if the hcall tracepoints are | 
|  | * enabled via a single load. | 
|  | */ | 
|  |  | 
|  | /* NB: reg/unreg are called while guarded with the tracepoints_mutex */ | 
|  | extern long hcall_tracepoint_refcount; | 
|  |  | 
|  | int hcall_tracepoint_regfunc(void) | 
|  | { | 
|  | hcall_tracepoint_refcount++; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void hcall_tracepoint_unregfunc(void) | 
|  | { | 
|  | hcall_tracepoint_refcount--; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Since the tracing code might execute hcalls we need to guard against | 
|  | * recursion. One example of this are spinlocks calling H_YIELD on | 
|  | * shared processor partitions. | 
|  | */ | 
|  | static DEFINE_PER_CPU(unsigned int, hcall_trace_depth); | 
|  |  | 
|  |  | 
|  | void __trace_hcall_entry(unsigned long opcode, unsigned long *args) | 
|  | { | 
|  | unsigned long flags; | 
|  | unsigned int *depth; | 
|  |  | 
|  | /* | 
|  | * We cannot call tracepoints inside RCU idle regions which | 
|  | * means we must not trace H_CEDE. | 
|  | */ | 
|  | if (opcode == H_CEDE) | 
|  | return; | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | depth = this_cpu_ptr(&hcall_trace_depth); | 
|  |  | 
|  | if (*depth) | 
|  | goto out; | 
|  |  | 
|  | (*depth)++; | 
|  | preempt_disable(); | 
|  | trace_hcall_entry(opcode, args); | 
|  | (*depth)--; | 
|  |  | 
|  | out: | 
|  | local_irq_restore(flags); | 
|  | } | 
|  |  | 
|  | void __trace_hcall_exit(long opcode, long retval, unsigned long *retbuf) | 
|  | { | 
|  | unsigned long flags; | 
|  | unsigned int *depth; | 
|  |  | 
|  | if (opcode == H_CEDE) | 
|  | return; | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | depth = this_cpu_ptr(&hcall_trace_depth); | 
|  |  | 
|  | if (*depth) | 
|  | goto out; | 
|  |  | 
|  | (*depth)++; | 
|  | trace_hcall_exit(opcode, retval, retbuf); | 
|  | preempt_enable(); | 
|  | (*depth)--; | 
|  |  | 
|  | out: | 
|  | local_irq_restore(flags); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * h_get_mpp | 
|  | * H_GET_MPP hcall returns info in 7 parms | 
|  | */ | 
|  | int h_get_mpp(struct hvcall_mpp_data *mpp_data) | 
|  | { | 
|  | int rc; | 
|  | unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; | 
|  |  | 
|  | rc = plpar_hcall9(H_GET_MPP, retbuf); | 
|  |  | 
|  | mpp_data->entitled_mem = retbuf[0]; | 
|  | mpp_data->mapped_mem = retbuf[1]; | 
|  |  | 
|  | mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff; | 
|  | mpp_data->pool_num = retbuf[2] & 0xffff; | 
|  |  | 
|  | mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff; | 
|  | mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff; | 
|  | mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffffUL; | 
|  |  | 
|  | mpp_data->pool_size = retbuf[4]; | 
|  | mpp_data->loan_request = retbuf[5]; | 
|  | mpp_data->backing_mem = retbuf[6]; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL(h_get_mpp); | 
|  |  | 
|  | int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data) | 
|  | { | 
|  | int rc; | 
|  | unsigned long retbuf[PLPAR_HCALL9_BUFSIZE] = { 0 }; | 
|  |  | 
|  | rc = plpar_hcall9(H_GET_MPP_X, retbuf); | 
|  |  | 
|  | mpp_x_data->coalesced_bytes = retbuf[0]; | 
|  | mpp_x_data->pool_coalesced_bytes = retbuf[1]; | 
|  | mpp_x_data->pool_purr_cycles = retbuf[2]; | 
|  | mpp_x_data->pool_spurr_cycles = retbuf[3]; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static unsigned long vsid_unscramble(unsigned long vsid, int ssize) | 
|  | { | 
|  | unsigned long protovsid; | 
|  | unsigned long va_bits = VA_BITS; | 
|  | unsigned long modinv, vsid_modulus; | 
|  | unsigned long max_mod_inv, tmp_modinv; | 
|  |  | 
|  | if (!mmu_has_feature(MMU_FTR_68_BIT_VA)) | 
|  | va_bits = 65; | 
|  |  | 
|  | if (ssize == MMU_SEGSIZE_256M) { | 
|  | modinv = VSID_MULINV_256M; | 
|  | vsid_modulus = ((1UL << (va_bits - SID_SHIFT)) - 1); | 
|  | } else { | 
|  | modinv = VSID_MULINV_1T; | 
|  | vsid_modulus = ((1UL << (va_bits - SID_SHIFT_1T)) - 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vsid outside our range. | 
|  | */ | 
|  | if (vsid >= vsid_modulus) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * If modinv is the modular multiplicate inverse of (x % vsid_modulus) | 
|  | * and vsid = (protovsid * x) % vsid_modulus, then we say: | 
|  | *   protovsid = (vsid * modinv) % vsid_modulus | 
|  | */ | 
|  |  | 
|  | /* Check if (vsid * modinv) overflow (63 bits) */ | 
|  | max_mod_inv = 0x7fffffffffffffffull / vsid; | 
|  | if (modinv < max_mod_inv) | 
|  | return (vsid * modinv) % vsid_modulus; | 
|  |  | 
|  | tmp_modinv = modinv/max_mod_inv; | 
|  | modinv %= max_mod_inv; | 
|  |  | 
|  | protovsid = (((vsid * max_mod_inv) % vsid_modulus) * tmp_modinv) % vsid_modulus; | 
|  | protovsid = (protovsid + vsid * modinv) % vsid_modulus; | 
|  |  | 
|  | return protovsid; | 
|  | } | 
|  |  | 
|  | static int __init reserve_vrma_context_id(void) | 
|  | { | 
|  | unsigned long protovsid; | 
|  |  | 
|  | /* | 
|  | * Reserve context ids which map to reserved virtual addresses. For now | 
|  | * we only reserve the context id which maps to the VRMA VSID. We ignore | 
|  | * the addresses in "ibm,adjunct-virtual-addresses" because we don't | 
|  | * enable adjunct support via the "ibm,client-architecture-support" | 
|  | * interface. | 
|  | */ | 
|  | protovsid = vsid_unscramble(VRMA_VSID, MMU_SEGSIZE_1T); | 
|  | hash__reserve_context_id(protovsid >> ESID_BITS_1T); | 
|  | return 0; | 
|  | } | 
|  | machine_device_initcall(pseries, reserve_vrma_context_id); | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | /* debugfs file interface for vpa data */ | 
|  | static ssize_t vpa_file_read(struct file *filp, char __user *buf, size_t len, | 
|  | loff_t *pos) | 
|  | { | 
|  | int cpu = (long)filp->private_data; | 
|  | struct lppaca *lppaca = &lppaca_of(cpu); | 
|  |  | 
|  | return simple_read_from_buffer(buf, len, pos, lppaca, | 
|  | sizeof(struct lppaca)); | 
|  | } | 
|  |  | 
|  | static const struct file_operations vpa_fops = { | 
|  | .open		= simple_open, | 
|  | .read		= vpa_file_read, | 
|  | .llseek		= default_llseek, | 
|  | }; | 
|  |  | 
|  | static int __init vpa_debugfs_init(void) | 
|  | { | 
|  | char name[16]; | 
|  | long i; | 
|  | struct dentry *vpa_dir; | 
|  |  | 
|  | if (!firmware_has_feature(FW_FEATURE_SPLPAR)) | 
|  | return 0; | 
|  |  | 
|  | vpa_dir = debugfs_create_dir("vpa", powerpc_debugfs_root); | 
|  | if (!vpa_dir) { | 
|  | pr_warn("%s: can't create vpa root dir\n", __func__); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* set up the per-cpu vpa file*/ | 
|  | for_each_possible_cpu(i) { | 
|  | struct dentry *d; | 
|  |  | 
|  | sprintf(name, "cpu-%ld", i); | 
|  |  | 
|  | d = debugfs_create_file(name, 0400, vpa_dir, (void *)i, | 
|  | &vpa_fops); | 
|  | if (!d) { | 
|  | pr_warn("%s: can't create per-cpu vpa file\n", | 
|  | __func__); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | machine_arch_initcall(pseries, vpa_debugfs_init); | 
|  | #endif /* CONFIG_DEBUG_FS */ |