| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * tsl4531.c - Support for TAOS TSL4531 ambient light sensor | 
 |  * | 
 |  * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net> | 
 |  * | 
 |  * IIO driver for the TSL4531x family | 
 |  *   TSL45311/TSL45313: 7-bit I2C slave address 0x39 | 
 |  *   TSL45315/TSL45317: 7-bit I2C slave address 0x29 | 
 |  * | 
 |  * TODO: single cycle measurement | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/err.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | #include <linux/iio/iio.h> | 
 | #include <linux/iio/sysfs.h> | 
 |  | 
 | #define TSL4531_DRV_NAME "tsl4531" | 
 |  | 
 | #define TSL4531_COMMAND BIT(7) | 
 |  | 
 | #define TSL4531_CONTROL (TSL4531_COMMAND | 0x00) | 
 | #define TSL4531_CONFIG (TSL4531_COMMAND | 0x01) | 
 | #define TSL4531_DATA (TSL4531_COMMAND | 0x04) | 
 | #define TSL4531_ID (TSL4531_COMMAND | 0x0a) | 
 |  | 
 | /* operating modes in control register */ | 
 | #define TSL4531_MODE_POWERDOWN 0x00 | 
 | #define TSL4531_MODE_SINGLE_ADC 0x02 | 
 | #define TSL4531_MODE_NORMAL 0x03 | 
 |  | 
 | /* integration time control in config register */ | 
 | #define TSL4531_TCNTRL_400MS 0x00 | 
 | #define TSL4531_TCNTRL_200MS 0x01 | 
 | #define TSL4531_TCNTRL_100MS 0x02 | 
 |  | 
 | /* part number in id register */ | 
 | #define TSL45311_ID 0x8 | 
 | #define TSL45313_ID 0x9 | 
 | #define TSL45315_ID 0xa | 
 | #define TSL45317_ID 0xb | 
 | #define TSL4531_ID_SHIFT 4 | 
 |  | 
 | struct tsl4531_data { | 
 | 	struct i2c_client *client; | 
 | 	struct mutex lock; | 
 | 	int int_time; | 
 | }; | 
 |  | 
 | static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4"); | 
 |  | 
 | static struct attribute *tsl4531_attributes[] = { | 
 | 	&iio_const_attr_integration_time_available.dev_attr.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group tsl4531_attribute_group = { | 
 | 	.attrs = tsl4531_attributes, | 
 | }; | 
 |  | 
 | static const struct iio_chan_spec tsl4531_channels[] = { | 
 | 	{ | 
 | 		.type = IIO_LIGHT, | 
 | 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | 
 | 			BIT(IIO_CHAN_INFO_SCALE) | | 
 | 			BIT(IIO_CHAN_INFO_INT_TIME) | 
 | 	} | 
 | }; | 
 |  | 
 | static int tsl4531_read_raw(struct iio_dev *indio_dev, | 
 | 				struct iio_chan_spec const *chan, | 
 | 				int *val, int *val2, long mask) | 
 | { | 
 | 	struct tsl4531_data *data = iio_priv(indio_dev); | 
 | 	int ret; | 
 |  | 
 | 	switch (mask) { | 
 | 	case IIO_CHAN_INFO_RAW: | 
 | 		ret = i2c_smbus_read_word_data(data->client, | 
 | 			TSL4531_DATA); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		*val = ret; | 
 | 		return IIO_VAL_INT; | 
 | 	case IIO_CHAN_INFO_SCALE: | 
 | 		/* 0.. 1x, 1 .. 2x, 2 .. 4x */ | 
 | 		*val = 1 << data->int_time; | 
 | 		return IIO_VAL_INT; | 
 | 	case IIO_CHAN_INFO_INT_TIME: | 
 | 		if (data->int_time == 0) | 
 | 			*val2 = 400000; | 
 | 		else if (data->int_time == 1) | 
 | 			*val2 = 200000; | 
 | 		else if (data->int_time == 2) | 
 | 			*val2 = 100000; | 
 | 		else | 
 | 			return -EINVAL; | 
 | 		*val = 0; | 
 | 		return IIO_VAL_INT_PLUS_MICRO; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static int tsl4531_write_raw(struct iio_dev *indio_dev, | 
 | 			     struct iio_chan_spec const *chan, | 
 | 			     int val, int val2, long mask) | 
 | { | 
 | 	struct tsl4531_data *data = iio_priv(indio_dev); | 
 | 	int int_time, ret; | 
 |  | 
 | 	switch (mask) { | 
 | 	case IIO_CHAN_INFO_INT_TIME: | 
 | 		if (val != 0) | 
 | 			return -EINVAL; | 
 | 		if (val2 == 400000) | 
 | 			int_time = 0; | 
 | 		else if (val2 == 200000) | 
 | 			int_time = 1; | 
 | 		else if (val2 == 100000) | 
 | 			int_time = 2; | 
 | 		else | 
 | 			return -EINVAL; | 
 | 		mutex_lock(&data->lock); | 
 | 		ret = i2c_smbus_write_byte_data(data->client, | 
 | 			TSL4531_CONFIG, int_time); | 
 | 		if (ret >= 0) | 
 | 			data->int_time = int_time; | 
 | 		mutex_unlock(&data->lock); | 
 | 		return ret; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static const struct iio_info tsl4531_info = { | 
 | 	.read_raw = tsl4531_read_raw, | 
 | 	.write_raw = tsl4531_write_raw, | 
 | 	.attrs = &tsl4531_attribute_group, | 
 | }; | 
 |  | 
 | static int tsl4531_check_id(struct i2c_client *client) | 
 | { | 
 | 	int ret = i2c_smbus_read_byte_data(client, TSL4531_ID); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	switch (ret >> TSL4531_ID_SHIFT) { | 
 | 	case TSL45311_ID: | 
 | 	case TSL45313_ID: | 
 | 	case TSL45315_ID: | 
 | 	case TSL45317_ID: | 
 | 		return 0; | 
 | 	default: | 
 | 		return -ENODEV; | 
 | 	} | 
 | } | 
 |  | 
 | static int tsl4531_probe(struct i2c_client *client, | 
 | 			  const struct i2c_device_id *id) | 
 | { | 
 | 	struct tsl4531_data *data; | 
 | 	struct iio_dev *indio_dev; | 
 | 	int ret; | 
 |  | 
 | 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | 
 | 	if (!indio_dev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	data = iio_priv(indio_dev); | 
 | 	i2c_set_clientdata(client, indio_dev); | 
 | 	data->client = client; | 
 | 	mutex_init(&data->lock); | 
 |  | 
 | 	ret = tsl4531_check_id(client); | 
 | 	if (ret) { | 
 | 		dev_err(&client->dev, "no TSL4531 sensor\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL, | 
 | 		TSL4531_MODE_NORMAL); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG, | 
 | 		TSL4531_TCNTRL_400MS); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	indio_dev->info = &tsl4531_info; | 
 | 	indio_dev->channels = tsl4531_channels; | 
 | 	indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels); | 
 | 	indio_dev->name = TSL4531_DRV_NAME; | 
 | 	indio_dev->modes = INDIO_DIRECT_MODE; | 
 |  | 
 | 	return iio_device_register(indio_dev); | 
 | } | 
 |  | 
 | static int tsl4531_powerdown(struct i2c_client *client) | 
 | { | 
 | 	return i2c_smbus_write_byte_data(client, TSL4531_CONTROL, | 
 | 		TSL4531_MODE_POWERDOWN); | 
 | } | 
 |  | 
 | static void tsl4531_remove(struct i2c_client *client) | 
 | { | 
 | 	iio_device_unregister(i2c_get_clientdata(client)); | 
 | 	tsl4531_powerdown(client); | 
 | } | 
 |  | 
 | static int tsl4531_suspend(struct device *dev) | 
 | { | 
 | 	return tsl4531_powerdown(to_i2c_client(dev)); | 
 | } | 
 |  | 
 | static int tsl4531_resume(struct device *dev) | 
 | { | 
 | 	return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL, | 
 | 		TSL4531_MODE_NORMAL); | 
 | } | 
 |  | 
 | static DEFINE_SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, | 
 | 				tsl4531_resume); | 
 |  | 
 | static const struct i2c_device_id tsl4531_id[] = { | 
 | 	{ "tsl4531", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, tsl4531_id); | 
 |  | 
 | static struct i2c_driver tsl4531_driver = { | 
 | 	.driver = { | 
 | 		.name   = TSL4531_DRV_NAME, | 
 | 		.pm	= pm_sleep_ptr(&tsl4531_pm_ops), | 
 | 	}, | 
 | 	.probe  = tsl4531_probe, | 
 | 	.remove = tsl4531_remove, | 
 | 	.id_table = tsl4531_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(tsl4531_driver); | 
 |  | 
 | MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); | 
 | MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver"); | 
 | MODULE_LICENSE("GPL"); |