| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  *  linux/arch/arm/common/amba.c | 
 |  * | 
 |  *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. | 
 |  */ | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/device.h> | 
 | #include <linux/string.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/io.h> | 
 | #include <linux/pm.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/pm_domain.h> | 
 | #include <linux/amba/bus.h> | 
 | #include <linux/sizes.h> | 
 | #include <linux/limits.h> | 
 | #include <linux/clk/clk-conf.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/reset.h> | 
 | #include <linux/of_irq.h> | 
 | #include <linux/of_device.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/iommu.h> | 
 | #include <linux/dma-map-ops.h> | 
 |  | 
 | #define to_amba_driver(d)	container_of(d, struct amba_driver, drv) | 
 |  | 
 | /* called on periphid match and class 0x9 coresight device. */ | 
 | static int | 
 | amba_cs_uci_id_match(const struct amba_id *table, struct amba_device *dev) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct amba_cs_uci_id *uci; | 
 |  | 
 | 	uci = table->data; | 
 |  | 
 | 	/* no table data or zero mask - return match on periphid */ | 
 | 	if (!uci || (uci->devarch_mask == 0)) | 
 | 		return 1; | 
 |  | 
 | 	/* test against read devtype and masked devarch value */ | 
 | 	ret = (dev->uci.devtype == uci->devtype) && | 
 | 		((dev->uci.devarch & uci->devarch_mask) == uci->devarch); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct amba_id * | 
 | amba_lookup(const struct amba_id *table, struct amba_device *dev) | 
 | { | 
 | 	while (table->mask) { | 
 | 		if (((dev->periphid & table->mask) == table->id) && | 
 | 			((dev->cid != CORESIGHT_CID) || | 
 | 			 (amba_cs_uci_id_match(table, dev)))) | 
 | 			return table; | 
 | 		table++; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int amba_get_enable_pclk(struct amba_device *pcdev) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	pcdev->pclk = clk_get(&pcdev->dev, "apb_pclk"); | 
 | 	if (IS_ERR(pcdev->pclk)) | 
 | 		return PTR_ERR(pcdev->pclk); | 
 |  | 
 | 	ret = clk_prepare_enable(pcdev->pclk); | 
 | 	if (ret) | 
 | 		clk_put(pcdev->pclk); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void amba_put_disable_pclk(struct amba_device *pcdev) | 
 | { | 
 | 	clk_disable_unprepare(pcdev->pclk); | 
 | 	clk_put(pcdev->pclk); | 
 | } | 
 |  | 
 |  | 
 | static ssize_t driver_override_show(struct device *_dev, | 
 | 				    struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct amba_device *dev = to_amba_device(_dev); | 
 | 	ssize_t len; | 
 |  | 
 | 	device_lock(_dev); | 
 | 	len = sprintf(buf, "%s\n", dev->driver_override); | 
 | 	device_unlock(_dev); | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t driver_override_store(struct device *_dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     const char *buf, size_t count) | 
 | { | 
 | 	struct amba_device *dev = to_amba_device(_dev); | 
 | 	int ret; | 
 |  | 
 | 	ret = driver_set_override(_dev, &dev->driver_override, buf, count); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return count; | 
 | } | 
 | static DEVICE_ATTR_RW(driver_override); | 
 |  | 
 | #define amba_attr_func(name,fmt,arg...)					\ | 
 | static ssize_t name##_show(struct device *_dev,				\ | 
 | 			   struct device_attribute *attr, char *buf)	\ | 
 | {									\ | 
 | 	struct amba_device *dev = to_amba_device(_dev);			\ | 
 | 	return sprintf(buf, fmt, arg);					\ | 
 | }									\ | 
 | static DEVICE_ATTR_RO(name) | 
 |  | 
 | amba_attr_func(id, "%08x\n", dev->periphid); | 
 | amba_attr_func(resource, "\t%016llx\t%016llx\t%016lx\n", | 
 | 	 (unsigned long long)dev->res.start, (unsigned long long)dev->res.end, | 
 | 	 dev->res.flags); | 
 |  | 
 | static struct attribute *amba_dev_attrs[] = { | 
 | 	&dev_attr_id.attr, | 
 | 	&dev_attr_resource.attr, | 
 | 	&dev_attr_driver_override.attr, | 
 | 	NULL, | 
 | }; | 
 | ATTRIBUTE_GROUPS(amba_dev); | 
 |  | 
 | static int amba_read_periphid(struct amba_device *dev) | 
 | { | 
 | 	struct reset_control *rstc; | 
 | 	u32 size, pid, cid; | 
 | 	void __iomem *tmp; | 
 | 	int i, ret; | 
 |  | 
 | 	ret = dev_pm_domain_attach(&dev->dev, true); | 
 | 	if (ret) { | 
 | 		dev_dbg(&dev->dev, "can't get PM domain: %d\n", ret); | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	ret = amba_get_enable_pclk(dev); | 
 | 	if (ret) { | 
 | 		dev_dbg(&dev->dev, "can't get pclk: %d\n", ret); | 
 | 		goto err_pm; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Find reset control(s) of the amba bus and de-assert them. | 
 | 	 */ | 
 | 	rstc = of_reset_control_array_get_optional_shared(dev->dev.of_node); | 
 | 	if (IS_ERR(rstc)) { | 
 | 		ret = PTR_ERR(rstc); | 
 | 		if (ret != -EPROBE_DEFER) | 
 | 			dev_err(&dev->dev, "can't get reset: %d\n", ret); | 
 | 		goto err_clk; | 
 | 	} | 
 | 	reset_control_deassert(rstc); | 
 | 	reset_control_put(rstc); | 
 |  | 
 | 	size = resource_size(&dev->res); | 
 | 	tmp = ioremap(dev->res.start, size); | 
 | 	if (!tmp) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_clk; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Read pid and cid based on size of resource | 
 | 	 * they are located at end of region | 
 | 	 */ | 
 | 	for (pid = 0, i = 0; i < 4; i++) | 
 | 		pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8); | 
 | 	for (cid = 0, i = 0; i < 4; i++) | 
 | 		cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8); | 
 |  | 
 | 	if (cid == CORESIGHT_CID) { | 
 | 		/* set the base to the start of the last 4k block */ | 
 | 		void __iomem *csbase = tmp + size - 4096; | 
 |  | 
 | 		dev->uci.devarch = readl(csbase + UCI_REG_DEVARCH_OFFSET); | 
 | 		dev->uci.devtype = readl(csbase + UCI_REG_DEVTYPE_OFFSET) & 0xff; | 
 | 	} | 
 |  | 
 | 	if (cid == AMBA_CID || cid == CORESIGHT_CID) { | 
 | 		dev->periphid = pid; | 
 | 		dev->cid = cid; | 
 | 	} | 
 |  | 
 | 	if (!dev->periphid) | 
 | 		ret = -ENODEV; | 
 |  | 
 | 	iounmap(tmp); | 
 |  | 
 | err_clk: | 
 | 	amba_put_disable_pclk(dev); | 
 | err_pm: | 
 | 	dev_pm_domain_detach(&dev->dev, true); | 
 | err_out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int amba_match(struct device *dev, struct device_driver *drv) | 
 | { | 
 | 	struct amba_device *pcdev = to_amba_device(dev); | 
 | 	struct amba_driver *pcdrv = to_amba_driver(drv); | 
 |  | 
 | 	mutex_lock(&pcdev->periphid_lock); | 
 | 	if (!pcdev->periphid) { | 
 | 		int ret = amba_read_periphid(pcdev); | 
 |  | 
 | 		/* | 
 | 		 * Returning any error other than -EPROBE_DEFER from bus match | 
 | 		 * can cause driver registration failure. So, if there's a | 
 | 		 * permanent failure in reading pid and cid, simply map it to | 
 | 		 * -EPROBE_DEFER. | 
 | 		 */ | 
 | 		if (ret) { | 
 | 			mutex_unlock(&pcdev->periphid_lock); | 
 | 			return -EPROBE_DEFER; | 
 | 		} | 
 | 		dev_set_uevent_suppress(dev, false); | 
 | 		kobject_uevent(&dev->kobj, KOBJ_ADD); | 
 | 	} | 
 | 	mutex_unlock(&pcdev->periphid_lock); | 
 |  | 
 | 	/* When driver_override is set, only bind to the matching driver */ | 
 | 	if (pcdev->driver_override) | 
 | 		return !strcmp(pcdev->driver_override, drv->name); | 
 |  | 
 | 	return amba_lookup(pcdrv->id_table, pcdev) != NULL; | 
 | } | 
 |  | 
 | static int amba_uevent(struct device *dev, struct kobj_uevent_env *env) | 
 | { | 
 | 	struct amba_device *pcdev = to_amba_device(dev); | 
 | 	int retval = 0; | 
 |  | 
 | 	retval = add_uevent_var(env, "AMBA_ID=%08x", pcdev->periphid); | 
 | 	if (retval) | 
 | 		return retval; | 
 |  | 
 | 	retval = add_uevent_var(env, "MODALIAS=amba:d%08X", pcdev->periphid); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int of_amba_device_decode_irq(struct amba_device *dev) | 
 | { | 
 | 	struct device_node *node = dev->dev.of_node; | 
 | 	int i, irq = 0; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_OF_IRQ) && node) { | 
 | 		/* Decode the IRQs and address ranges */ | 
 | 		for (i = 0; i < AMBA_NR_IRQS; i++) { | 
 | 			irq = of_irq_get(node, i); | 
 | 			if (irq < 0) { | 
 | 				if (irq == -EPROBE_DEFER) | 
 | 					return irq; | 
 | 				irq = 0; | 
 | 			} | 
 |  | 
 | 			dev->irq[i] = irq; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * These are the device model conversion veneers; they convert the | 
 |  * device model structures to our more specific structures. | 
 |  */ | 
 | static int amba_probe(struct device *dev) | 
 | { | 
 | 	struct amba_device *pcdev = to_amba_device(dev); | 
 | 	struct amba_driver *pcdrv = to_amba_driver(dev->driver); | 
 | 	const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev); | 
 | 	int ret; | 
 |  | 
 | 	do { | 
 | 		ret = of_amba_device_decode_irq(pcdev); | 
 | 		if (ret) | 
 | 			break; | 
 |  | 
 | 		ret = of_clk_set_defaults(dev->of_node, false); | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		ret = dev_pm_domain_attach(dev, true); | 
 | 		if (ret) | 
 | 			break; | 
 |  | 
 | 		ret = amba_get_enable_pclk(pcdev); | 
 | 		if (ret) { | 
 | 			dev_pm_domain_detach(dev, true); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		pm_runtime_get_noresume(dev); | 
 | 		pm_runtime_set_active(dev); | 
 | 		pm_runtime_enable(dev); | 
 |  | 
 | 		ret = pcdrv->probe(pcdev, id); | 
 | 		if (ret == 0) | 
 | 			break; | 
 |  | 
 | 		pm_runtime_disable(dev); | 
 | 		pm_runtime_set_suspended(dev); | 
 | 		pm_runtime_put_noidle(dev); | 
 |  | 
 | 		amba_put_disable_pclk(pcdev); | 
 | 		dev_pm_domain_detach(dev, true); | 
 | 	} while (0); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void amba_remove(struct device *dev) | 
 | { | 
 | 	struct amba_device *pcdev = to_amba_device(dev); | 
 | 	struct amba_driver *drv = to_amba_driver(dev->driver); | 
 |  | 
 | 	pm_runtime_get_sync(dev); | 
 | 	if (drv->remove) | 
 | 		drv->remove(pcdev); | 
 | 	pm_runtime_put_noidle(dev); | 
 |  | 
 | 	/* Undo the runtime PM settings in amba_probe() */ | 
 | 	pm_runtime_disable(dev); | 
 | 	pm_runtime_set_suspended(dev); | 
 | 	pm_runtime_put_noidle(dev); | 
 |  | 
 | 	amba_put_disable_pclk(pcdev); | 
 | 	dev_pm_domain_detach(dev, true); | 
 | } | 
 |  | 
 | static void amba_shutdown(struct device *dev) | 
 | { | 
 | 	struct amba_driver *drv; | 
 |  | 
 | 	if (!dev->driver) | 
 | 		return; | 
 |  | 
 | 	drv = to_amba_driver(dev->driver); | 
 | 	if (drv->shutdown) | 
 | 		drv->shutdown(to_amba_device(dev)); | 
 | } | 
 |  | 
 | static int amba_dma_configure(struct device *dev) | 
 | { | 
 | 	struct amba_driver *drv = to_amba_driver(dev->driver); | 
 | 	enum dev_dma_attr attr; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (dev->of_node) { | 
 | 		ret = of_dma_configure(dev, dev->of_node, true); | 
 | 	} else if (has_acpi_companion(dev)) { | 
 | 		attr = acpi_get_dma_attr(to_acpi_device_node(dev->fwnode)); | 
 | 		ret = acpi_dma_configure(dev, attr); | 
 | 	} | 
 |  | 
 | 	if (!ret && !drv->driver_managed_dma) { | 
 | 		ret = iommu_device_use_default_domain(dev); | 
 | 		if (ret) | 
 | 			arch_teardown_dma_ops(dev); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void amba_dma_cleanup(struct device *dev) | 
 | { | 
 | 	struct amba_driver *drv = to_amba_driver(dev->driver); | 
 |  | 
 | 	if (!drv->driver_managed_dma) | 
 | 		iommu_device_unuse_default_domain(dev); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | /* | 
 |  * Hooks to provide runtime PM of the pclk (bus clock).  It is safe to | 
 |  * enable/disable the bus clock at runtime PM suspend/resume as this | 
 |  * does not result in loss of context. | 
 |  */ | 
 | static int amba_pm_runtime_suspend(struct device *dev) | 
 | { | 
 | 	struct amba_device *pcdev = to_amba_device(dev); | 
 | 	int ret = pm_generic_runtime_suspend(dev); | 
 |  | 
 | 	if (ret == 0 && dev->driver) { | 
 | 		if (pm_runtime_is_irq_safe(dev)) | 
 | 			clk_disable(pcdev->pclk); | 
 | 		else | 
 | 			clk_disable_unprepare(pcdev->pclk); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int amba_pm_runtime_resume(struct device *dev) | 
 | { | 
 | 	struct amba_device *pcdev = to_amba_device(dev); | 
 | 	int ret; | 
 |  | 
 | 	if (dev->driver) { | 
 | 		if (pm_runtime_is_irq_safe(dev)) | 
 | 			ret = clk_enable(pcdev->pclk); | 
 | 		else | 
 | 			ret = clk_prepare_enable(pcdev->pclk); | 
 | 		/* Failure is probably fatal to the system, but... */ | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return pm_generic_runtime_resume(dev); | 
 | } | 
 | #endif /* CONFIG_PM */ | 
 |  | 
 | static const struct dev_pm_ops amba_pm = { | 
 | 	.suspend	= pm_generic_suspend, | 
 | 	.resume		= pm_generic_resume, | 
 | 	.freeze		= pm_generic_freeze, | 
 | 	.thaw		= pm_generic_thaw, | 
 | 	.poweroff	= pm_generic_poweroff, | 
 | 	.restore	= pm_generic_restore, | 
 | 	SET_RUNTIME_PM_OPS( | 
 | 		amba_pm_runtime_suspend, | 
 | 		amba_pm_runtime_resume, | 
 | 		NULL | 
 | 	) | 
 | }; | 
 |  | 
 | /* | 
 |  * Primecells are part of the Advanced Microcontroller Bus Architecture, | 
 |  * so we call the bus "amba". | 
 |  * DMA configuration for platform and AMBA bus is same. So here we reuse | 
 |  * platform's DMA config routine. | 
 |  */ | 
 | struct bus_type amba_bustype = { | 
 | 	.name		= "amba", | 
 | 	.dev_groups	= amba_dev_groups, | 
 | 	.match		= amba_match, | 
 | 	.uevent		= amba_uevent, | 
 | 	.probe		= amba_probe, | 
 | 	.remove		= amba_remove, | 
 | 	.shutdown	= amba_shutdown, | 
 | 	.dma_configure	= amba_dma_configure, | 
 | 	.dma_cleanup	= amba_dma_cleanup, | 
 | 	.pm		= &amba_pm, | 
 | }; | 
 | EXPORT_SYMBOL_GPL(amba_bustype); | 
 |  | 
 | static int __init amba_init(void) | 
 | { | 
 | 	return bus_register(&amba_bustype); | 
 | } | 
 |  | 
 | postcore_initcall(amba_init); | 
 |  | 
 | static int amba_proxy_probe(struct amba_device *adev, | 
 | 			    const struct amba_id *id) | 
 | { | 
 | 	WARN(1, "Stub driver should never match any device.\n"); | 
 | 	return -ENODEV; | 
 | } | 
 |  | 
 | static const struct amba_id amba_stub_drv_ids[] = { | 
 | 	{ 0, 0 }, | 
 | }; | 
 |  | 
 | static struct amba_driver amba_proxy_drv = { | 
 | 	.drv = { | 
 | 		.name = "amba-proxy", | 
 | 	}, | 
 | 	.probe = amba_proxy_probe, | 
 | 	.id_table = amba_stub_drv_ids, | 
 | }; | 
 |  | 
 | static int __init amba_stub_drv_init(void) | 
 | { | 
 | 	if (!IS_ENABLED(CONFIG_MODULES)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * The amba_match() function will get called only if there is at least | 
 | 	 * one amba driver registered. If all amba drivers are modules and are | 
 | 	 * only loaded based on uevents, then we'll hit a chicken-and-egg | 
 | 	 * situation where amba_match() is waiting on drivers and drivers are | 
 | 	 * waiting on amba_match(). So, register a stub driver to make sure | 
 | 	 * amba_match() is called even if no amba driver has been registered. | 
 | 	 */ | 
 | 	return amba_driver_register(&amba_proxy_drv); | 
 | } | 
 | late_initcall_sync(amba_stub_drv_init); | 
 |  | 
 | /** | 
 |  *	amba_driver_register - register an AMBA device driver | 
 |  *	@drv: amba device driver structure | 
 |  * | 
 |  *	Register an AMBA device driver with the Linux device model | 
 |  *	core.  If devices pre-exist, the drivers probe function will | 
 |  *	be called. | 
 |  */ | 
 | int amba_driver_register(struct amba_driver *drv) | 
 | { | 
 | 	if (!drv->probe) | 
 | 		return -EINVAL; | 
 |  | 
 | 	drv->drv.bus = &amba_bustype; | 
 |  | 
 | 	return driver_register(&drv->drv); | 
 | } | 
 | EXPORT_SYMBOL(amba_driver_register); | 
 |  | 
 | /** | 
 |  *	amba_driver_unregister - remove an AMBA device driver | 
 |  *	@drv: AMBA device driver structure to remove | 
 |  * | 
 |  *	Unregister an AMBA device driver from the Linux device | 
 |  *	model.  The device model will call the drivers remove function | 
 |  *	for each device the device driver is currently handling. | 
 |  */ | 
 | void amba_driver_unregister(struct amba_driver *drv) | 
 | { | 
 | 	driver_unregister(&drv->drv); | 
 | } | 
 | EXPORT_SYMBOL(amba_driver_unregister); | 
 |  | 
 | static void amba_device_release(struct device *dev) | 
 | { | 
 | 	struct amba_device *d = to_amba_device(dev); | 
 |  | 
 | 	if (d->res.parent) | 
 | 		release_resource(&d->res); | 
 | 	mutex_destroy(&d->periphid_lock); | 
 | 	kfree(d); | 
 | } | 
 |  | 
 | /** | 
 |  *	amba_device_add - add a previously allocated AMBA device structure | 
 |  *	@dev: AMBA device allocated by amba_device_alloc | 
 |  *	@parent: resource parent for this devices resources | 
 |  * | 
 |  *	Claim the resource, and read the device cell ID if not already | 
 |  *	initialized.  Register the AMBA device with the Linux device | 
 |  *	manager. | 
 |  */ | 
 | int amba_device_add(struct amba_device *dev, struct resource *parent) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = request_resource(parent, &dev->res); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* If primecell ID isn't hard-coded, figure it out */ | 
 | 	if (!dev->periphid) { | 
 | 		/* | 
 | 		 * AMBA device uevents require reading its pid and cid | 
 | 		 * registers.  To do this, the device must be on, clocked and | 
 | 		 * out of reset.  However in some cases those resources might | 
 | 		 * not yet be available.  If that's the case, we suppress the | 
 | 		 * generation of uevents until we can read the pid and cid | 
 | 		 * registers.  See also amba_match(). | 
 | 		 */ | 
 | 		if (amba_read_periphid(dev)) | 
 | 			dev_set_uevent_suppress(&dev->dev, true); | 
 | 	} | 
 |  | 
 | 	ret = device_add(&dev->dev); | 
 | 	if (ret) | 
 | 		release_resource(&dev->res); | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(amba_device_add); | 
 |  | 
 | static void amba_device_initialize(struct amba_device *dev, const char *name) | 
 | { | 
 | 	device_initialize(&dev->dev); | 
 | 	if (name) | 
 | 		dev_set_name(&dev->dev, "%s", name); | 
 | 	dev->dev.release = amba_device_release; | 
 | 	dev->dev.bus = &amba_bustype; | 
 | 	dev->dev.dma_mask = &dev->dev.coherent_dma_mask; | 
 | 	dev->dev.dma_parms = &dev->dma_parms; | 
 | 	dev->res.name = dev_name(&dev->dev); | 
 | 	mutex_init(&dev->periphid_lock); | 
 | } | 
 |  | 
 | /** | 
 |  *	amba_device_alloc - allocate an AMBA device | 
 |  *	@name: sysfs name of the AMBA device | 
 |  *	@base: base of AMBA device | 
 |  *	@size: size of AMBA device | 
 |  * | 
 |  *	Allocate and initialize an AMBA device structure.  Returns %NULL | 
 |  *	on failure. | 
 |  */ | 
 | struct amba_device *amba_device_alloc(const char *name, resource_size_t base, | 
 | 	size_t size) | 
 | { | 
 | 	struct amba_device *dev; | 
 |  | 
 | 	dev = kzalloc(sizeof(*dev), GFP_KERNEL); | 
 | 	if (dev) { | 
 | 		amba_device_initialize(dev, name); | 
 | 		dev->res.start = base; | 
 | 		dev->res.end = base + size - 1; | 
 | 		dev->res.flags = IORESOURCE_MEM; | 
 | 	} | 
 |  | 
 | 	return dev; | 
 | } | 
 | EXPORT_SYMBOL_GPL(amba_device_alloc); | 
 |  | 
 | /** | 
 |  *	amba_device_register - register an AMBA device | 
 |  *	@dev: AMBA device to register | 
 |  *	@parent: parent memory resource | 
 |  * | 
 |  *	Setup the AMBA device, reading the cell ID if present. | 
 |  *	Claim the resource, and register the AMBA device with | 
 |  *	the Linux device manager. | 
 |  */ | 
 | int amba_device_register(struct amba_device *dev, struct resource *parent) | 
 | { | 
 | 	amba_device_initialize(dev, dev->dev.init_name); | 
 | 	dev->dev.init_name = NULL; | 
 |  | 
 | 	return amba_device_add(dev, parent); | 
 | } | 
 | EXPORT_SYMBOL(amba_device_register); | 
 |  | 
 | /** | 
 |  *	amba_device_put - put an AMBA device | 
 |  *	@dev: AMBA device to put | 
 |  */ | 
 | void amba_device_put(struct amba_device *dev) | 
 | { | 
 | 	put_device(&dev->dev); | 
 | } | 
 | EXPORT_SYMBOL_GPL(amba_device_put); | 
 |  | 
 | /** | 
 |  *	amba_device_unregister - unregister an AMBA device | 
 |  *	@dev: AMBA device to remove | 
 |  * | 
 |  *	Remove the specified AMBA device from the Linux device | 
 |  *	manager.  All files associated with this object will be | 
 |  *	destroyed, and device drivers notified that the device has | 
 |  *	been removed.  The AMBA device's resources including | 
 |  *	the amba_device structure will be freed once all | 
 |  *	references to it have been dropped. | 
 |  */ | 
 | void amba_device_unregister(struct amba_device *dev) | 
 | { | 
 | 	device_unregister(&dev->dev); | 
 | } | 
 | EXPORT_SYMBOL(amba_device_unregister); | 
 |  | 
 | /** | 
 |  *	amba_request_regions - request all mem regions associated with device | 
 |  *	@dev: amba_device structure for device | 
 |  *	@name: name, or NULL to use driver name | 
 |  */ | 
 | int amba_request_regions(struct amba_device *dev, const char *name) | 
 | { | 
 | 	int ret = 0; | 
 | 	u32 size; | 
 |  | 
 | 	if (!name) | 
 | 		name = dev->dev.driver->name; | 
 |  | 
 | 	size = resource_size(&dev->res); | 
 |  | 
 | 	if (!request_mem_region(dev->res.start, size, name)) | 
 | 		ret = -EBUSY; | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(amba_request_regions); | 
 |  | 
 | /** | 
 |  *	amba_release_regions - release mem regions associated with device | 
 |  *	@dev: amba_device structure for device | 
 |  * | 
 |  *	Release regions claimed by a successful call to amba_request_regions. | 
 |  */ | 
 | void amba_release_regions(struct amba_device *dev) | 
 | { | 
 | 	u32 size; | 
 |  | 
 | 	size = resource_size(&dev->res); | 
 | 	release_mem_region(dev->res.start, size); | 
 | } | 
 | EXPORT_SYMBOL(amba_release_regions); |