| // SPDX-License-Identifier: GPL-2.0 | |
| #include <stdint.h> | |
| #include "resctrl.h" | |
| char llc_occup_path[1024]; | |
| void perf_event_attr_initialize(struct perf_event_attr *pea, __u64 config) | |
| { | |
| memset(pea, 0, sizeof(*pea)); | |
| pea->type = PERF_TYPE_HARDWARE; | |
| pea->size = sizeof(*pea); | |
| pea->read_format = PERF_FORMAT_GROUP; | |
| pea->exclude_kernel = 1; | |
| pea->exclude_hv = 1; | |
| pea->exclude_idle = 1; | |
| pea->exclude_callchain_kernel = 1; | |
| pea->inherit = 1; | |
| pea->exclude_guest = 1; | |
| pea->disabled = 1; | |
| pea->config = config; | |
| } | |
| /* Start counters to log values */ | |
| int perf_event_reset_enable(int pe_fd) | |
| { | |
| int ret; | |
| ret = ioctl(pe_fd, PERF_EVENT_IOC_RESET, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = ioctl(pe_fd, PERF_EVENT_IOC_ENABLE, 0); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| void perf_event_initialize_read_format(struct perf_event_read *pe_read) | |
| { | |
| memset(pe_read, 0, sizeof(*pe_read)); | |
| pe_read->nr = 1; | |
| } | |
| int perf_open(struct perf_event_attr *pea, pid_t pid, int cpu_no) | |
| { | |
| int pe_fd; | |
| pe_fd = perf_event_open(pea, pid, cpu_no, -1, PERF_FLAG_FD_CLOEXEC); | |
| if (pe_fd == -1) { | |
| ksft_perror("Error opening leader"); | |
| return -1; | |
| } | |
| perf_event_reset_enable(pe_fd); | |
| return pe_fd; | |
| } | |
| /* | |
| * Get LLC Occupancy as reported by RESCTRL FS | |
| * For CMT, | |
| * 1. If con_mon grp and mon grp given, then read from mon grp in | |
| * con_mon grp | |
| * 2. If only con_mon grp given, then read from con_mon grp | |
| * 3. If both not given, then read from root con_mon grp | |
| * For CAT, | |
| * 1. If con_mon grp given, then read from it | |
| * 2. If con_mon grp not given, then read from root con_mon grp | |
| * | |
| * Return: =0 on success. <0 on failure. | |
| */ | |
| static int get_llc_occu_resctrl(unsigned long *llc_occupancy) | |
| { | |
| FILE *fp; | |
| fp = fopen(llc_occup_path, "r"); | |
| if (!fp) { | |
| ksft_perror("Failed to open results file"); | |
| return -1; | |
| } | |
| if (fscanf(fp, "%lu", llc_occupancy) <= 0) { | |
| ksft_perror("Could not get llc occupancy"); | |
| fclose(fp); | |
| return -1; | |
| } | |
| fclose(fp); | |
| return 0; | |
| } | |
| /* | |
| * print_results_cache: the cache results are stored in a file | |
| * @filename: file that stores the results | |
| * @bm_pid: child pid that runs benchmark | |
| * @llc_value: perf miss value / | |
| * llc occupancy value reported by resctrl FS | |
| * | |
| * Return: 0 on success, < 0 on error. | |
| */ | |
| static int print_results_cache(const char *filename, pid_t bm_pid, __u64 llc_value) | |
| { | |
| FILE *fp; | |
| if (strcmp(filename, "stdio") == 0 || strcmp(filename, "stderr") == 0) { | |
| printf("Pid: %d \t LLC_value: %llu\n", (int)bm_pid, llc_value); | |
| } else { | |
| fp = fopen(filename, "a"); | |
| if (!fp) { | |
| ksft_perror("Cannot open results file"); | |
| return -1; | |
| } | |
| fprintf(fp, "Pid: %d \t llc_value: %llu\n", (int)bm_pid, llc_value); | |
| fclose(fp); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * perf_event_measure - Measure perf events | |
| * @filename: Filename for writing the results | |
| * @bm_pid: PID that runs the benchmark | |
| * | |
| * Measures perf events (e.g., cache misses) and writes the results into | |
| * @filename. @bm_pid is written to the results file along with the measured | |
| * value. | |
| * | |
| * Return: =0 on success. <0 on failure. | |
| */ | |
| int perf_event_measure(int pe_fd, struct perf_event_read *pe_read, | |
| const char *filename, pid_t bm_pid) | |
| { | |
| int ret; | |
| /* Stop counters after one span to get miss rate */ | |
| ret = ioctl(pe_fd, PERF_EVENT_IOC_DISABLE, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = read(pe_fd, pe_read, sizeof(*pe_read)); | |
| if (ret == -1) { | |
| ksft_perror("Could not get perf value"); | |
| return -1; | |
| } | |
| return print_results_cache(filename, bm_pid, pe_read->values[0].value); | |
| } | |
| /* | |
| * measure_llc_resctrl - Measure resctrl LLC value from resctrl | |
| * @filename: Filename for writing the results | |
| * @bm_pid: PID that runs the benchmark | |
| * | |
| * Measures LLC occupancy from resctrl and writes the results into @filename. | |
| * @bm_pid is written to the results file along with the measured value. | |
| * | |
| * Return: =0 on success. <0 on failure. | |
| */ | |
| int measure_llc_resctrl(const char *filename, pid_t bm_pid) | |
| { | |
| unsigned long llc_occu_resc = 0; | |
| int ret; | |
| ret = get_llc_occu_resctrl(&llc_occu_resc); | |
| if (ret < 0) | |
| return ret; | |
| return print_results_cache(filename, bm_pid, llc_occu_resc); | |
| } | |
| /* | |
| * show_cache_info - Show generic cache test information | |
| * @no_of_bits: Number of bits | |
| * @avg_llc_val: Average of LLC cache result data | |
| * @cache_span: Cache span | |
| * @lines: @cache_span in lines or bytes | |
| */ | |
| void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool lines) | |
| { | |
| ksft_print_msg("Number of bits: %d\n", no_of_bits); | |
| ksft_print_msg("Average LLC val: %llu\n", avg_llc_val); | |
| ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes", | |
| cache_span); | |
| } |