| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * ethtool.h: Defines for Linux ethtool. | |
| * | |
| * Copyright (C) 1998 David S. Miller (davem@redhat.com) | |
| * Copyright 2001 Jeff Garzik <jgarzik@pobox.com> | |
| * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) | |
| * Portions Copyright 2002 Intel (eli.kupermann@intel.com, | |
| * christopher.leech@intel.com, | |
| * scott.feldman@intel.com) | |
| * Portions Copyright (C) Sun Microsystems 2008 | |
| */ | |
| #ifndef _LINUX_ETHTOOL_H | |
| #define _LINUX_ETHTOOL_H | |
| #include <linux/bitmap.h> | |
| #include <linux/compat.h> | |
| #include <linux/if_ether.h> | |
| #include <linux/netlink.h> | |
| #include <uapi/linux/ethtool.h> | |
| #include <uapi/linux/net_tstamp.h> | |
| struct compat_ethtool_rx_flow_spec { | |
| u32 flow_type; | |
| union ethtool_flow_union h_u; | |
| struct ethtool_flow_ext h_ext; | |
| union ethtool_flow_union m_u; | |
| struct ethtool_flow_ext m_ext; | |
| compat_u64 ring_cookie; | |
| u32 location; | |
| }; | |
| struct compat_ethtool_rxnfc { | |
| u32 cmd; | |
| u32 flow_type; | |
| compat_u64 data; | |
| struct compat_ethtool_rx_flow_spec fs; | |
| u32 rule_cnt; | |
| u32 rule_locs[]; | |
| }; | |
| #include <linux/rculist.h> | |
| /** | |
| * enum ethtool_phys_id_state - indicator state for physical identification | |
| * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated | |
| * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated | |
| * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE | |
| * is not supported) | |
| * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE | |
| * is not supported) | |
| */ | |
| enum ethtool_phys_id_state { | |
| ETHTOOL_ID_INACTIVE, | |
| ETHTOOL_ID_ACTIVE, | |
| ETHTOOL_ID_ON, | |
| ETHTOOL_ID_OFF | |
| }; | |
| enum { | |
| ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */ | |
| ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */ | |
| ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */ | |
| /* | |
| * Add your fresh new hash function bits above and remember to update | |
| * rss_hash_func_strings[] in ethtool.c | |
| */ | |
| ETH_RSS_HASH_FUNCS_COUNT | |
| }; | |
| /** | |
| * struct kernel_ethtool_ringparam - RX/TX ring configuration | |
| * @rx_buf_len: Current length of buffers on the rx ring. | |
| * @tcp_data_split: Scatter packet headers and data to separate buffers | |
| * @tx_push: The flag of tx push mode | |
| * @rx_push: The flag of rx push mode | |
| * @cqe_size: Size of TX/RX completion queue event | |
| * @tx_push_buf_len: Size of TX push buffer | |
| * @tx_push_buf_max_len: Maximum allowed size of TX push buffer | |
| */ | |
| struct kernel_ethtool_ringparam { | |
| u32 rx_buf_len; | |
| u8 tcp_data_split; | |
| u8 tx_push; | |
| u8 rx_push; | |
| u32 cqe_size; | |
| u32 tx_push_buf_len; | |
| u32 tx_push_buf_max_len; | |
| }; | |
| /** | |
| * enum ethtool_supported_ring_param - indicator caps for setting ring params | |
| * @ETHTOOL_RING_USE_RX_BUF_LEN: capture for setting rx_buf_len | |
| * @ETHTOOL_RING_USE_CQE_SIZE: capture for setting cqe_size | |
| * @ETHTOOL_RING_USE_TX_PUSH: capture for setting tx_push | |
| * @ETHTOOL_RING_USE_RX_PUSH: capture for setting rx_push | |
| * @ETHTOOL_RING_USE_TX_PUSH_BUF_LEN: capture for setting tx_push_buf_len | |
| * @ETHTOOL_RING_USE_TCP_DATA_SPLIT: capture for setting tcp_data_split | |
| */ | |
| enum ethtool_supported_ring_param { | |
| ETHTOOL_RING_USE_RX_BUF_LEN = BIT(0), | |
| ETHTOOL_RING_USE_CQE_SIZE = BIT(1), | |
| ETHTOOL_RING_USE_TX_PUSH = BIT(2), | |
| ETHTOOL_RING_USE_RX_PUSH = BIT(3), | |
| ETHTOOL_RING_USE_TX_PUSH_BUF_LEN = BIT(4), | |
| ETHTOOL_RING_USE_TCP_DATA_SPLIT = BIT(5), | |
| }; | |
| #define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit)) | |
| #define __ETH_RSS_HASH(name) __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT) | |
| #define ETH_RSS_HASH_TOP __ETH_RSS_HASH(TOP) | |
| #define ETH_RSS_HASH_XOR __ETH_RSS_HASH(XOR) | |
| #define ETH_RSS_HASH_CRC32 __ETH_RSS_HASH(CRC32) | |
| #define ETH_RSS_HASH_UNKNOWN 0 | |
| #define ETH_RSS_HASH_NO_CHANGE 0 | |
| struct net_device; | |
| struct netlink_ext_ack; | |
| /* Link extended state and substate. */ | |
| struct ethtool_link_ext_state_info { | |
| enum ethtool_link_ext_state link_ext_state; | |
| union { | |
| enum ethtool_link_ext_substate_autoneg autoneg; | |
| enum ethtool_link_ext_substate_link_training link_training; | |
| enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch; | |
| enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity; | |
| enum ethtool_link_ext_substate_cable_issue cable_issue; | |
| enum ethtool_link_ext_substate_module module; | |
| u32 __link_ext_substate; | |
| }; | |
| }; | |
| struct ethtool_link_ext_stats { | |
| /* Custom Linux statistic for PHY level link down events. | |
| * In a simpler world it should be equal to netdev->carrier_down_count | |
| * unfortunately netdev also counts local reconfigurations which don't | |
| * actually take the physical link down, not to mention NC-SI which, | |
| * if present, keeps the link up regardless of host state. | |
| * This statistic counts when PHY _actually_ went down, or lost link. | |
| * | |
| * Note that we need u64 for ethtool_stats_init() and comparisons | |
| * to ETHTOOL_STAT_NOT_SET, but only u32 is exposed to the user. | |
| */ | |
| u64 link_down_events; | |
| }; | |
| /** | |
| * ethtool_rxfh_indir_default - get default value for RX flow hash indirection | |
| * @index: Index in RX flow hash indirection table | |
| * @n_rx_rings: Number of RX rings to use | |
| * | |
| * This function provides the default policy for RX flow hash indirection. | |
| */ | |
| static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings) | |
| { | |
| return index % n_rx_rings; | |
| } | |
| /** | |
| * struct ethtool_rxfh_context - a custom RSS context configuration | |
| * @indir_size: Number of u32 entries in indirection table | |
| * @key_size: Size of hash key, in bytes | |
| * @priv_size: Size of driver private data, in bytes | |
| * @hfunc: RSS hash function identifier. One of the %ETH_RSS_HASH_* | |
| * @input_xfrm: Defines how the input data is transformed. Valid values are one | |
| * of %RXH_XFRM_*. | |
| * @indir_configured: indir has been specified (at create time or subsequently) | |
| * @key_configured: hkey has been specified (at create time or subsequently) | |
| */ | |
| struct ethtool_rxfh_context { | |
| u32 indir_size; | |
| u32 key_size; | |
| u16 priv_size; | |
| u8 hfunc; | |
| u8 input_xfrm; | |
| u8 indir_configured:1; | |
| u8 key_configured:1; | |
| /* private: driver private data, indirection table, and hash key are | |
| * stored sequentially in @data area. Use below helpers to access. | |
| */ | |
| u32 key_off; | |
| u8 data[] __aligned(sizeof(void *)); | |
| }; | |
| static inline void *ethtool_rxfh_context_priv(struct ethtool_rxfh_context *ctx) | |
| { | |
| return ctx->data; | |
| } | |
| static inline u32 *ethtool_rxfh_context_indir(struct ethtool_rxfh_context *ctx) | |
| { | |
| return (u32 *)(ctx->data + ALIGN(ctx->priv_size, sizeof(u32))); | |
| } | |
| static inline u8 *ethtool_rxfh_context_key(struct ethtool_rxfh_context *ctx) | |
| { | |
| return &ctx->data[ctx->key_off]; | |
| } | |
| void ethtool_rxfh_context_lost(struct net_device *dev, u32 context_id); | |
| /* declare a link mode bitmap */ | |
| #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name) \ | |
| DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS) | |
| /* drivers must ignore base.cmd and base.link_mode_masks_nwords | |
| * fields, but they are allowed to overwrite them (will be ignored). | |
| */ | |
| struct ethtool_link_ksettings { | |
| struct ethtool_link_settings base; | |
| struct { | |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); | |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); | |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); | |
| } link_modes; | |
| u32 lanes; | |
| }; | |
| /** | |
| * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask | |
| * @ptr : pointer to struct ethtool_link_ksettings | |
| * @name : one of supported/advertising/lp_advertising | |
| */ | |
| #define ethtool_link_ksettings_zero_link_mode(ptr, name) \ | |
| bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS) | |
| /** | |
| * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings | |
| * link mode mask | |
| * @ptr : pointer to struct ethtool_link_ksettings | |
| * @name : one of supported/advertising/lp_advertising | |
| * @mode : one of the ETHTOOL_LINK_MODE_*_BIT | |
| * (not atomic, no bound checking) | |
| */ | |
| #define ethtool_link_ksettings_add_link_mode(ptr, name, mode) \ | |
| __set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name) | |
| /** | |
| * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings | |
| * link mode mask | |
| * @ptr : pointer to struct ethtool_link_ksettings | |
| * @name : one of supported/advertising/lp_advertising | |
| * @mode : one of the ETHTOOL_LINK_MODE_*_BIT | |
| * (not atomic, no bound checking) | |
| */ | |
| #define ethtool_link_ksettings_del_link_mode(ptr, name, mode) \ | |
| __clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name) | |
| /** | |
| * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask | |
| * @ptr : pointer to struct ethtool_link_ksettings | |
| * @name : one of supported/advertising/lp_advertising | |
| * @mode : one of the ETHTOOL_LINK_MODE_*_BIT | |
| * (not atomic, no bound checking) | |
| * | |
| * Returns true/false. | |
| */ | |
| #define ethtool_link_ksettings_test_link_mode(ptr, name, mode) \ | |
| test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name) | |
| extern int | |
| __ethtool_get_link_ksettings(struct net_device *dev, | |
| struct ethtool_link_ksettings *link_ksettings); | |
| struct ethtool_keee { | |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); | |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(advertised); | |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertised); | |
| u32 tx_lpi_timer; | |
| bool tx_lpi_enabled; | |
| bool eee_active; | |
| bool eee_enabled; | |
| }; | |
| struct kernel_ethtool_coalesce { | |
| u8 use_cqe_mode_tx; | |
| u8 use_cqe_mode_rx; | |
| u32 tx_aggr_max_bytes; | |
| u32 tx_aggr_max_frames; | |
| u32 tx_aggr_time_usecs; | |
| }; | |
| /** | |
| * ethtool_intersect_link_masks - Given two link masks, AND them together | |
| * @dst: first mask and where result is stored | |
| * @src: second mask to intersect with | |
| * | |
| * Given two link mode masks, AND them together and save the result in dst. | |
| */ | |
| void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst, | |
| struct ethtool_link_ksettings *src); | |
| void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst, | |
| u32 legacy_u32); | |
| /* return false if src had higher bits set. lower bits always updated. */ | |
| bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, | |
| const unsigned long *src); | |
| #define ETHTOOL_COALESCE_RX_USECS BIT(0) | |
| #define ETHTOOL_COALESCE_RX_MAX_FRAMES BIT(1) | |
| #define ETHTOOL_COALESCE_RX_USECS_IRQ BIT(2) | |
| #define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ BIT(3) | |
| #define ETHTOOL_COALESCE_TX_USECS BIT(4) | |
| #define ETHTOOL_COALESCE_TX_MAX_FRAMES BIT(5) | |
| #define ETHTOOL_COALESCE_TX_USECS_IRQ BIT(6) | |
| #define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ BIT(7) | |
| #define ETHTOOL_COALESCE_STATS_BLOCK_USECS BIT(8) | |
| #define ETHTOOL_COALESCE_USE_ADAPTIVE_RX BIT(9) | |
| #define ETHTOOL_COALESCE_USE_ADAPTIVE_TX BIT(10) | |
| #define ETHTOOL_COALESCE_PKT_RATE_LOW BIT(11) | |
| #define ETHTOOL_COALESCE_RX_USECS_LOW BIT(12) | |
| #define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW BIT(13) | |
| #define ETHTOOL_COALESCE_TX_USECS_LOW BIT(14) | |
| #define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW BIT(15) | |
| #define ETHTOOL_COALESCE_PKT_RATE_HIGH BIT(16) | |
| #define ETHTOOL_COALESCE_RX_USECS_HIGH BIT(17) | |
| #define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH BIT(18) | |
| #define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19) | |
| #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20) | |
| #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21) | |
| #define ETHTOOL_COALESCE_USE_CQE_RX BIT(22) | |
| #define ETHTOOL_COALESCE_USE_CQE_TX BIT(23) | |
| #define ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES BIT(24) | |
| #define ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES BIT(25) | |
| #define ETHTOOL_COALESCE_TX_AGGR_TIME_USECS BIT(26) | |
| #define ETHTOOL_COALESCE_RX_PROFILE BIT(27) | |
| #define ETHTOOL_COALESCE_TX_PROFILE BIT(28) | |
| #define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(28, 0) | |
| #define ETHTOOL_COALESCE_USECS \ | |
| (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS) | |
| #define ETHTOOL_COALESCE_MAX_FRAMES \ | |
| (ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES) | |
| #define ETHTOOL_COALESCE_USECS_IRQ \ | |
| (ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ) | |
| #define ETHTOOL_COALESCE_MAX_FRAMES_IRQ \ | |
| (ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ | \ | |
| ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ) | |
| #define ETHTOOL_COALESCE_USE_ADAPTIVE \ | |
| (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX) | |
| #define ETHTOOL_COALESCE_USECS_LOW_HIGH \ | |
| (ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \ | |
| ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH) | |
| #define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH \ | |
| (ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW | \ | |
| ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW | \ | |
| ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH | \ | |
| ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH) | |
| #define ETHTOOL_COALESCE_PKT_RATE_RX_USECS \ | |
| (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | \ | |
| ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \ | |
| ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \ | |
| ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL) | |
| #define ETHTOOL_COALESCE_USE_CQE \ | |
| (ETHTOOL_COALESCE_USE_CQE_RX | ETHTOOL_COALESCE_USE_CQE_TX) | |
| #define ETHTOOL_COALESCE_TX_AGGR \ | |
| (ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES | \ | |
| ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES | \ | |
| ETHTOOL_COALESCE_TX_AGGR_TIME_USECS) | |
| #define ETHTOOL_STAT_NOT_SET (~0ULL) | |
| static inline void ethtool_stats_init(u64 *stats, unsigned int n) | |
| { | |
| while (n--) | |
| stats[n] = ETHTOOL_STAT_NOT_SET; | |
| } | |
| /* Basic IEEE 802.3 MAC statistics (30.3.1.1.*), not otherwise exposed | |
| * via a more targeted API. | |
| */ | |
| struct ethtool_eth_mac_stats { | |
| enum ethtool_mac_stats_src src; | |
| struct_group(stats, | |
| u64 FramesTransmittedOK; | |
| u64 SingleCollisionFrames; | |
| u64 MultipleCollisionFrames; | |
| u64 FramesReceivedOK; | |
| u64 FrameCheckSequenceErrors; | |
| u64 AlignmentErrors; | |
| u64 OctetsTransmittedOK; | |
| u64 FramesWithDeferredXmissions; | |
| u64 LateCollisions; | |
| u64 FramesAbortedDueToXSColls; | |
| u64 FramesLostDueToIntMACXmitError; | |
| u64 CarrierSenseErrors; | |
| u64 OctetsReceivedOK; | |
| u64 FramesLostDueToIntMACRcvError; | |
| u64 MulticastFramesXmittedOK; | |
| u64 BroadcastFramesXmittedOK; | |
| u64 FramesWithExcessiveDeferral; | |
| u64 MulticastFramesReceivedOK; | |
| u64 BroadcastFramesReceivedOK; | |
| u64 InRangeLengthErrors; | |
| u64 OutOfRangeLengthField; | |
| u64 FrameTooLongErrors; | |
| ); | |
| }; | |
| /* Basic IEEE 802.3 PHY statistics (30.3.2.1.*), not otherwise exposed | |
| * via a more targeted API. | |
| */ | |
| struct ethtool_eth_phy_stats { | |
| enum ethtool_mac_stats_src src; | |
| struct_group(stats, | |
| u64 SymbolErrorDuringCarrier; | |
| ); | |
| }; | |
| /** | |
| * struct ethtool_phy_stats - PHY-level statistics counters | |
| * @rx_packets: Total successfully received frames | |
| * @rx_bytes: Total successfully received bytes | |
| * @rx_errors: Total received frames with errors (e.g., CRC errors) | |
| * @tx_packets: Total successfully transmitted frames | |
| * @tx_bytes: Total successfully transmitted bytes | |
| * @tx_errors: Total transmitted frames with errors | |
| * | |
| * This structure provides a standardized interface for reporting | |
| * PHY-level statistics counters. It is designed to expose statistics | |
| * commonly provided by PHYs but not explicitly defined in the IEEE | |
| * 802.3 standard. | |
| */ | |
| struct ethtool_phy_stats { | |
| u64 rx_packets; | |
| u64 rx_bytes; | |
| u64 rx_errors; | |
| u64 tx_packets; | |
| u64 tx_bytes; | |
| u64 tx_errors; | |
| }; | |
| /* Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*), not otherwise exposed | |
| * via a more targeted API. | |
| */ | |
| struct ethtool_eth_ctrl_stats { | |
| enum ethtool_mac_stats_src src; | |
| struct_group(stats, | |
| u64 MACControlFramesTransmitted; | |
| u64 MACControlFramesReceived; | |
| u64 UnsupportedOpcodesReceived; | |
| ); | |
| }; | |
| /** | |
| * struct ethtool_pause_stats - statistics for IEEE 802.3x pause frames | |
| * @src: input field denoting whether stats should be queried from the eMAC or | |
| * pMAC (if the MM layer is supported). To be ignored otherwise. | |
| * @tx_pause_frames: transmitted pause frame count. Reported to user space | |
| * as %ETHTOOL_A_PAUSE_STAT_TX_FRAMES. | |
| * | |
| * Equivalent to `30.3.4.2 aPAUSEMACCtrlFramesTransmitted` | |
| * from the standard. | |
| * | |
| * @rx_pause_frames: received pause frame count. Reported to user space | |
| * as %ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to: | |
| * | |
| * Equivalent to `30.3.4.3 aPAUSEMACCtrlFramesReceived` | |
| * from the standard. | |
| */ | |
| struct ethtool_pause_stats { | |
| enum ethtool_mac_stats_src src; | |
| struct_group(stats, | |
| u64 tx_pause_frames; | |
| u64 rx_pause_frames; | |
| ); | |
| }; | |
| #define ETHTOOL_MAX_LANES 8 | |
| /** | |
| * struct ethtool_fec_stats - statistics for IEEE 802.3 FEC | |
| * @corrected_blocks: number of received blocks corrected by FEC | |
| * Reported to user space as %ETHTOOL_A_FEC_STAT_CORRECTED. | |
| * | |
| * Equivalent to `30.5.1.1.17 aFECCorrectedBlocks` from the standard. | |
| * | |
| * @uncorrectable_blocks: number of received blocks FEC was not able to correct | |
| * Reported to user space as %ETHTOOL_A_FEC_STAT_UNCORR. | |
| * | |
| * Equivalent to `30.5.1.1.18 aFECUncorrectableBlocks` from the standard. | |
| * | |
| * @corrected_bits: number of bits corrected by FEC | |
| * Similar to @corrected_blocks but counts individual bit changes, | |
| * not entire FEC data blocks. This is a non-standard statistic. | |
| * Reported to user space as %ETHTOOL_A_FEC_STAT_CORR_BITS. | |
| * | |
| * For each of the above fields, the two substructure members are: | |
| * | |
| * - @lanes: per-lane/PCS-instance counts as defined by the standard | |
| * - @total: error counts for the entire port, for drivers incapable of reporting | |
| * per-lane stats | |
| * | |
| * Drivers should fill in either only total or per-lane statistics, core | |
| * will take care of adding lane values up to produce the total. | |
| */ | |
| struct ethtool_fec_stats { | |
| struct ethtool_fec_stat { | |
| u64 total; | |
| u64 lanes[ETHTOOL_MAX_LANES]; | |
| } corrected_blocks, uncorrectable_blocks, corrected_bits; | |
| }; | |
| /** | |
| * struct ethtool_rmon_hist_range - byte range for histogram statistics | |
| * @low: low bound of the bucket (inclusive) | |
| * @high: high bound of the bucket (inclusive) | |
| */ | |
| struct ethtool_rmon_hist_range { | |
| u16 low; | |
| u16 high; | |
| }; | |
| #define ETHTOOL_RMON_HIST_MAX 10 | |
| /** | |
| * struct ethtool_rmon_stats - selected RMON (RFC 2819) statistics | |
| * @src: input field denoting whether stats should be queried from the eMAC or | |
| * pMAC (if the MM layer is supported). To be ignored otherwise. | |
| * @undersize_pkts: Equivalent to `etherStatsUndersizePkts` from the RFC. | |
| * @oversize_pkts: Equivalent to `etherStatsOversizePkts` from the RFC. | |
| * @fragments: Equivalent to `etherStatsFragments` from the RFC. | |
| * @jabbers: Equivalent to `etherStatsJabbers` from the RFC. | |
| * @hist: Packet counter for packet length buckets (e.g. | |
| * `etherStatsPkts128to255Octets` from the RFC). | |
| * @hist_tx: Tx counters in similar form to @hist, not defined in the RFC. | |
| * | |
| * Selection of RMON (RFC 2819) statistics which are not exposed via different | |
| * APIs, primarily the packet-length-based counters. | |
| * Unfortunately different designs choose different buckets beyond | |
| * the 1024B mark (jumbo frame teritory), so the definition of the bucket | |
| * ranges is left to the driver. | |
| */ | |
| struct ethtool_rmon_stats { | |
| enum ethtool_mac_stats_src src; | |
| struct_group(stats, | |
| u64 undersize_pkts; | |
| u64 oversize_pkts; | |
| u64 fragments; | |
| u64 jabbers; | |
| u64 hist[ETHTOOL_RMON_HIST_MAX]; | |
| u64 hist_tx[ETHTOOL_RMON_HIST_MAX]; | |
| ); | |
| }; | |
| /** | |
| * struct ethtool_ts_stats - HW timestamping statistics | |
| * @pkts: Number of packets successfully timestamped by the hardware. | |
| * @lost: Number of hardware timestamping requests where the timestamping | |
| * information from the hardware never arrived for submission with | |
| * the skb. | |
| * @err: Number of arbitrary timestamp generation error events that the | |
| * hardware encountered, exclusive of @lost statistics. Cases such | |
| * as resource exhaustion, unavailability, firmware errors, and | |
| * detected illogical timestamp values not submitted with the skb | |
| * are inclusive to this counter. | |
| */ | |
| struct ethtool_ts_stats { | |
| struct_group(tx_stats, | |
| u64 pkts; | |
| u64 lost; | |
| u64 err; | |
| ); | |
| }; | |
| #define ETH_MODULE_EEPROM_PAGE_LEN 128 | |
| #define ETH_MODULE_MAX_I2C_ADDRESS 0x7f | |
| /** | |
| * struct ethtool_module_eeprom - plug-in module EEPROM read / write parameters | |
| * @offset: When @offset is 0-127, it is used as an address to the Lower Memory | |
| * (@page must be 0). Otherwise, it is used as an address to the | |
| * Upper Memory. | |
| * @length: Number of bytes to read / write. | |
| * @page: Page number. | |
| * @bank: Bank number, if supported by EEPROM spec. | |
| * @i2c_address: I2C address of a page. Value less than 0x7f expected. Most | |
| * EEPROMs use 0x50 or 0x51. | |
| * @data: Pointer to buffer with EEPROM data of @length size. | |
| */ | |
| struct ethtool_module_eeprom { | |
| u32 offset; | |
| u32 length; | |
| u8 page; | |
| u8 bank; | |
| u8 i2c_address; | |
| u8 *data; | |
| }; | |
| /** | |
| * struct ethtool_module_power_mode_params - module power mode parameters | |
| * @policy: The power mode policy enforced by the host for the plug-in module. | |
| * @mode: The operational power mode of the plug-in module. Should be filled by | |
| * device drivers on get operations. | |
| */ | |
| struct ethtool_module_power_mode_params { | |
| enum ethtool_module_power_mode_policy policy; | |
| enum ethtool_module_power_mode mode; | |
| }; | |
| /** | |
| * struct ethtool_mm_state - 802.3 MAC merge layer state | |
| * @verify_time: | |
| * wait time between verification attempts in ms (according to clause | |
| * 30.14.1.6 aMACMergeVerifyTime) | |
| * @max_verify_time: | |
| * maximum accepted value for the @verify_time variable in set requests | |
| * @verify_status: | |
| * state of the verification state machine of the MM layer (according to | |
| * clause 30.14.1.2 aMACMergeStatusVerify) | |
| * @tx_enabled: | |
| * set if the MM layer is administratively enabled in the TX direction | |
| * (according to clause 30.14.1.3 aMACMergeEnableTx) | |
| * @tx_active: | |
| * set if the MM layer is enabled in the TX direction, which makes FP | |
| * possible (according to 30.14.1.5 aMACMergeStatusTx). This should be | |
| * true if MM is enabled, and the verification status is either verified, | |
| * or disabled. | |
| * @pmac_enabled: | |
| * set if the preemptible MAC is powered on and is able to receive | |
| * preemptible packets and respond to verification frames. | |
| * @verify_enabled: | |
| * set if the Verify function of the MM layer (which sends SMD-V | |
| * verification requests) is administratively enabled (regardless of | |
| * whether it is currently in the ETHTOOL_MM_VERIFY_STATUS_DISABLED state | |
| * or not), according to clause 30.14.1.4 aMACMergeVerifyDisableTx (but | |
| * using positive rather than negative logic). The device should always | |
| * respond to received SMD-V requests as long as @pmac_enabled is set. | |
| * @tx_min_frag_size: | |
| * the minimum size of non-final mPacket fragments that the link partner | |
| * supports receiving, expressed in octets. Compared to the definition | |
| * from clause 30.14.1.7 aMACMergeAddFragSize which is expressed in the | |
| * range 0 to 3 (requiring a translation to the size in octets according | |
| * to the formula 64 * (1 + addFragSize) - 4), a value in a continuous and | |
| * unbounded range can be specified here. | |
| * @rx_min_frag_size: | |
| * the minimum size of non-final mPacket fragments that this device | |
| * supports receiving, expressed in octets. | |
| */ | |
| struct ethtool_mm_state { | |
| u32 verify_time; | |
| u32 max_verify_time; | |
| enum ethtool_mm_verify_status verify_status; | |
| bool tx_enabled; | |
| bool tx_active; | |
| bool pmac_enabled; | |
| bool verify_enabled; | |
| u32 tx_min_frag_size; | |
| u32 rx_min_frag_size; | |
| }; | |
| /** | |
| * struct ethtool_mm_cfg - 802.3 MAC merge layer configuration | |
| * @verify_time: see struct ethtool_mm_state | |
| * @verify_enabled: see struct ethtool_mm_state | |
| * @tx_enabled: see struct ethtool_mm_state | |
| * @pmac_enabled: see struct ethtool_mm_state | |
| * @tx_min_frag_size: see struct ethtool_mm_state | |
| */ | |
| struct ethtool_mm_cfg { | |
| u32 verify_time; | |
| bool verify_enabled; | |
| bool tx_enabled; | |
| bool pmac_enabled; | |
| u32 tx_min_frag_size; | |
| }; | |
| /** | |
| * struct ethtool_mm_stats - 802.3 MAC merge layer statistics | |
| * @MACMergeFrameAssErrorCount: | |
| * received MAC frames with reassembly errors | |
| * @MACMergeFrameSmdErrorCount: | |
| * received MAC frames/fragments rejected due to unknown or incorrect SMD | |
| * @MACMergeFrameAssOkCount: | |
| * received MAC frames that were successfully reassembled and passed up | |
| * @MACMergeFragCountRx: | |
| * number of additional correct SMD-C mPackets received due to preemption | |
| * @MACMergeFragCountTx: | |
| * number of additional mPackets sent due to preemption | |
| * @MACMergeHoldCount: | |
| * number of times the MM layer entered the HOLD state, which blocks | |
| * transmission of preemptible traffic | |
| */ | |
| struct ethtool_mm_stats { | |
| u64 MACMergeFrameAssErrorCount; | |
| u64 MACMergeFrameSmdErrorCount; | |
| u64 MACMergeFrameAssOkCount; | |
| u64 MACMergeFragCountRx; | |
| u64 MACMergeFragCountTx; | |
| u64 MACMergeHoldCount; | |
| }; | |
| /** | |
| * struct ethtool_rxfh_param - RXFH (RSS) parameters | |
| * @hfunc: Defines the current RSS hash function used by HW (or to be set to). | |
| * Valid values are one of the %ETH_RSS_HASH_*. | |
| * @indir_size: On SET, the array size of the user buffer for the | |
| * indirection table, which may be zero, or | |
| * %ETH_RXFH_INDIR_NO_CHANGE. On GET (read from the driver), | |
| * the array size of the hardware indirection table. | |
| * @indir: The indirection table of size @indir_size entries. | |
| * @key_size: On SET, the array size of the user buffer for the hash key, | |
| * which may be zero. On GET (read from the driver), the size of the | |
| * hardware hash key. | |
| * @key: The hash key of size @key_size bytes. | |
| * @rss_context: RSS context identifier. Context 0 is the default for normal | |
| * traffic; other contexts can be referenced as the destination for RX flow | |
| * classification rules. On SET, %ETH_RXFH_CONTEXT_ALLOC is used | |
| * to allocate a new RSS context; on return this field will | |
| * contain the ID of the newly allocated context. | |
| * @rss_delete: Set to non-ZERO to remove the @rss_context context. | |
| * @input_xfrm: Defines how the input data is transformed. Valid values are one | |
| * of %RXH_XFRM_*. | |
| */ | |
| struct ethtool_rxfh_param { | |
| u8 hfunc; | |
| u32 indir_size; | |
| u32 *indir; | |
| u32 key_size; | |
| u8 *key; | |
| u32 rss_context; | |
| u8 rss_delete; | |
| u8 input_xfrm; | |
| }; | |
| /** | |
| * struct kernel_ethtool_ts_info - kernel copy of struct ethtool_ts_info | |
| * @cmd: command number = %ETHTOOL_GET_TS_INFO | |
| * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags | |
| * @phc_index: device index of the associated PHC, or -1 if there is none | |
| * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values | |
| * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values | |
| */ | |
| struct kernel_ethtool_ts_info { | |
| u32 cmd; | |
| u32 so_timestamping; | |
| int phc_index; | |
| enum hwtstamp_tx_types tx_types; | |
| enum hwtstamp_rx_filters rx_filters; | |
| }; | |
| /** | |
| * struct ethtool_ops - optional netdev operations | |
| * @cap_link_lanes_supported: indicates if the driver supports lanes | |
| * parameter. | |
| * @cap_rss_ctx_supported: indicates if the driver supports RSS | |
| * contexts via legacy API, drivers implementing @create_rxfh_context | |
| * do not have to set this bit. | |
| * @cap_rss_sym_xor_supported: indicates if the driver supports symmetric-xor | |
| * RSS. | |
| * @rxfh_per_ctx_key: device supports setting different RSS key for each | |
| * additional context. Netlink API should report hfunc, key, and input_xfrm | |
| * for every context, not just context 0. | |
| * @cap_rss_rxnfc_adds: device supports nonzero ring_cookie in filters with | |
| * %FLOW_RSS flag; the queue ID from the filter is added to the value from | |
| * the indirection table to determine the delivery queue. | |
| * @rxfh_indir_space: max size of RSS indirection tables, if indirection table | |
| * size as returned by @get_rxfh_indir_size may change during lifetime | |
| * of the device. Leave as 0 if the table size is constant. | |
| * @rxfh_key_space: same as @rxfh_indir_space, but for the key. | |
| * @rxfh_priv_size: size of the driver private data area the core should | |
| * allocate for an RSS context (in &struct ethtool_rxfh_context). | |
| * @rxfh_max_num_contexts: maximum (exclusive) supported RSS context ID. | |
| * If this is zero then the core may choose any (nonzero) ID, otherwise | |
| * the core will only use IDs strictly less than this value, as the | |
| * @rss_context argument to @create_rxfh_context and friends. | |
| * @supported_coalesce_params: supported types of interrupt coalescing. | |
| * @supported_ring_params: supported ring params. | |
| * @get_drvinfo: Report driver/device information. Modern drivers no | |
| * longer have to implement this callback. Most fields are | |
| * correctly filled in by the core using system information, or | |
| * populated using other driver operations. | |
| * @get_regs_len: Get buffer length required for @get_regs | |
| * @get_regs: Get device registers | |
| * @get_wol: Report whether Wake-on-Lan is enabled | |
| * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code | |
| * or zero. | |
| * @get_msglevel: Report driver message level. This should be the value | |
| * of the @msg_enable field used by netif logging functions. | |
| * @set_msglevel: Set driver message level | |
| * @nway_reset: Restart autonegotiation. Returns a negative error code | |
| * or zero. | |
| * @get_link: Report whether physical link is up. Will only be called if | |
| * the netdev is up. Should usually be set to ethtool_op_get_link(), | |
| * which uses netif_carrier_ok(). | |
| * @get_link_ext_state: Report link extended state. Should set link_ext_state and | |
| * link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown, | |
| * do not attach ext_substate attribute to netlink message). If link_ext_state | |
| * and link_ext_substate are unknown, return -ENODATA. If not implemented, | |
| * link_ext_state and link_ext_substate will not be sent to userspace. | |
| * @get_link_ext_stats: Read extra link-related counters. | |
| * @get_eeprom_len: Read range of EEPROM addresses for validation of | |
| * @get_eeprom and @set_eeprom requests. | |
| * Returns 0 if device does not support EEPROM access. | |
| * @get_eeprom: Read data from the device EEPROM. | |
| * Should fill in the magic field. Don't need to check len for zero | |
| * or wraparound. Fill in the data argument with the eeprom values | |
| * from offset to offset + len. Update len to the amount read. | |
| * Returns an error or zero. | |
| * @set_eeprom: Write data to the device EEPROM. | |
| * Should validate the magic field. Don't need to check len for zero | |
| * or wraparound. Update len to the amount written. Returns an error | |
| * or zero. | |
| * @get_coalesce: Get interrupt coalescing parameters. Returns a negative | |
| * error code or zero. | |
| * @set_coalesce: Set interrupt coalescing parameters. Supported coalescing | |
| * types should be set in @supported_coalesce_params. | |
| * Returns a negative error code or zero. | |
| * @get_ringparam: Report ring sizes | |
| * @set_ringparam: Set ring sizes. Returns a negative error code or zero. | |
| * @get_pause_stats: Report pause frame statistics. Drivers must not zero | |
| * statistics which they don't report. The stats structure is initialized | |
| * to ETHTOOL_STAT_NOT_SET indicating driver does not report statistics. | |
| * @get_pauseparam: Report pause parameters | |
| * @set_pauseparam: Set pause parameters. Returns a negative error code | |
| * or zero. | |
| * @self_test: Run specified self-tests | |
| * @get_strings: Return a set of strings that describe the requested objects | |
| * @set_phys_id: Identify the physical devices, e.g. by flashing an LED | |
| * attached to it. The implementation may update the indicator | |
| * asynchronously or synchronously, but in either case it must return | |
| * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE, | |
| * and must either activate asynchronous updates and return zero, return | |
| * a negative error or return a positive frequency for synchronous | |
| * indication (e.g. 1 for one on/off cycle per second). If it returns | |
| * a frequency then it will be called again at intervals with the | |
| * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of | |
| * the indicator accordingly. Finally, it is called with the argument | |
| * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a | |
| * negative error code or zero. | |
| * @get_ethtool_stats: Return extended statistics about the device. | |
| * This is only useful if the device maintains statistics not | |
| * included in &struct rtnl_link_stats64. | |
| * @begin: Function to be called before any other operation. Returns a | |
| * negative error code or zero. | |
| * @complete: Function to be called after any other operation except | |
| * @begin. Will be called even if the other operation failed. | |
| * @get_priv_flags: Report driver-specific feature flags. | |
| * @set_priv_flags: Set driver-specific feature flags. Returns a negative | |
| * error code or zero. | |
| * @get_sset_count: Get number of strings that @get_strings will write. | |
| * @get_rxnfc: Get RX flow classification rules. Returns a negative | |
| * error code or zero. | |
| * @set_rxnfc: Set RX flow classification rules. Returns a negative | |
| * error code or zero. | |
| * @flash_device: Write a firmware image to device's flash memory. | |
| * Returns a negative error code or zero. | |
| * @reset: Reset (part of) the device, as specified by a bitmask of | |
| * flags from &enum ethtool_reset_flags. Returns a negative | |
| * error code or zero. | |
| * @get_rxfh_key_size: Get the size of the RX flow hash key. | |
| * Returns zero if not supported for this specific device. | |
| * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table. | |
| * Returns zero if not supported for this specific device. | |
| * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key | |
| * and/or hash function. | |
| * Returns a negative error code or zero. | |
| * @set_rxfh: Set the contents of the RX flow hash indirection table, hash | |
| * key, and/or hash function. Arguments which are set to %NULL or zero | |
| * will remain unchanged. | |
| * Returns a negative error code or zero. An error code must be returned | |
| * if at least one unsupported change was requested. | |
| * @create_rxfh_context: Create a new RSS context with the specified RX flow | |
| * hash indirection table, hash key, and hash function. | |
| * The &struct ethtool_rxfh_context for this context is passed in @ctx; | |
| * note that the indir table, hkey and hfunc are not yet populated as | |
| * of this call. The driver does not need to update these; the core | |
| * will do so if this op succeeds. | |
| * However, if @rxfh.indir is set to %NULL, the driver must update the | |
| * indir table in @ctx with the (default or inherited) table actually in | |
| * use; similarly, if @rxfh.key is %NULL, @rxfh.hfunc is | |
| * %ETH_RSS_HASH_NO_CHANGE, or @rxfh.input_xfrm is %RXH_XFRM_NO_CHANGE, | |
| * the driver should update the corresponding information in @ctx. | |
| * If the driver provides this method, it must also provide | |
| * @modify_rxfh_context and @remove_rxfh_context. | |
| * Returns a negative error code or zero. | |
| * @modify_rxfh_context: Reconfigure the specified RSS context. Allows setting | |
| * the contents of the RX flow hash indirection table, hash key, and/or | |
| * hash function associated with the given context. | |
| * Parameters which are set to %NULL or zero will remain unchanged. | |
| * The &struct ethtool_rxfh_context for this context is passed in @ctx; | |
| * note that it will still contain the *old* settings. The driver does | |
| * not need to update these; the core will do so if this op succeeds. | |
| * Returns a negative error code or zero. An error code must be returned | |
| * if at least one unsupported change was requested. | |
| * @remove_rxfh_context: Remove the specified RSS context. | |
| * The &struct ethtool_rxfh_context for this context is passed in @ctx. | |
| * Returns a negative error code or zero. | |
| * @get_channels: Get number of channels. | |
| * @set_channels: Set number of channels. Returns a negative error code or | |
| * zero. | |
| * @get_dump_flag: Get dump flag indicating current dump length, version, | |
| * and flag of the device. | |
| * @get_dump_data: Get dump data. | |
| * @set_dump: Set dump specific flags to the device. | |
| * @get_ts_info: Get the time stamping and PTP hardware clock capabilities. | |
| * It may be called with RCU, or rtnl or reference on the device. | |
| * Drivers supporting transmit time stamps in software should set this to | |
| * ethtool_op_get_ts_info(). Drivers must not zero statistics which they | |
| * don't report. The stats structure is initialized to ETHTOOL_STAT_NOT_SET | |
| * indicating driver does not report statistics. | |
| * @get_ts_stats: Query the device hardware timestamping statistics. | |
| * @get_module_info: Get the size and type of the eeprom contained within | |
| * a plug-in module. | |
| * @get_module_eeprom: Get the eeprom information from the plug-in module | |
| * @get_eee: Get Energy-Efficient (EEE) supported and status. | |
| * @set_eee: Set EEE status (enable/disable) as well as LPI timers. | |
| * @get_tunable: Read the value of a driver / device tunable. | |
| * @set_tunable: Set the value of a driver / device tunable. | |
| * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue. | |
| * It must check that the given queue number is valid. If neither a RX nor | |
| * a TX queue has this number, return -EINVAL. If only a RX queue or a TX | |
| * queue has this number, set the inapplicable fields to ~0 and return 0. | |
| * Returns a negative error code or zero. | |
| * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue. | |
| * It must check that the given queue number is valid. If neither a RX nor | |
| * a TX queue has this number, return -EINVAL. If only a RX queue or a TX | |
| * queue has this number, ignore the inapplicable fields. Supported | |
| * coalescing types should be set in @supported_coalesce_params. | |
| * Returns a negative error code or zero. | |
| * @get_link_ksettings: Get various device settings including Ethernet link | |
| * settings. The %cmd and %link_mode_masks_nwords fields should be | |
| * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter), | |
| * any change to them will be overwritten by kernel. Returns a negative | |
| * error code or zero. | |
| * @set_link_ksettings: Set various device settings including Ethernet link | |
| * settings. The %cmd and %link_mode_masks_nwords fields should be | |
| * ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter), | |
| * any change to them will be overwritten by kernel. Returns a negative | |
| * error code or zero. | |
| * @get_fec_stats: Report FEC statistics. | |
| * Core will sum up per-lane stats to get the total. | |
| * Drivers must not zero statistics which they don't report. The stats | |
| * structure is initialized to ETHTOOL_STAT_NOT_SET indicating driver does | |
| * not report statistics. | |
| * @get_fecparam: Get the network device Forward Error Correction parameters. | |
| * @set_fecparam: Set the network device Forward Error Correction parameters. | |
| * @get_ethtool_phy_stats: Return extended statistics about the PHY device. | |
| * This is only useful if the device maintains PHY statistics and | |
| * cannot use the standard PHY library helpers. | |
| * @get_phy_tunable: Read the value of a PHY tunable. | |
| * @set_phy_tunable: Set the value of a PHY tunable. | |
| * @get_module_eeprom_by_page: Get a region of plug-in module EEPROM data from | |
| * specified page. Returns a negative error code or the amount of bytes | |
| * read. | |
| * @set_module_eeprom_by_page: Write to a region of plug-in module EEPROM, | |
| * from kernel space only. Returns a negative error code or zero. | |
| * @get_eth_phy_stats: Query some of the IEEE 802.3 PHY statistics. | |
| * @get_eth_mac_stats: Query some of the IEEE 802.3 MAC statistics. | |
| * @get_eth_ctrl_stats: Query some of the IEEE 802.3 MAC Ctrl statistics. | |
| * @get_rmon_stats: Query some of the RMON (RFC 2819) statistics. | |
| * Set %ranges to a pointer to zero-terminated array of byte ranges. | |
| * @get_module_power_mode: Get the power mode policy for the plug-in module | |
| * used by the network device and its operational power mode, if | |
| * plugged-in. | |
| * @set_module_power_mode: Set the power mode policy for the plug-in module | |
| * used by the network device. | |
| * @get_mm: Query the 802.3 MAC Merge layer state. | |
| * @set_mm: Set the 802.3 MAC Merge layer parameters. | |
| * @get_mm_stats: Query the 802.3 MAC Merge layer statistics. | |
| * | |
| * All operations are optional (i.e. the function pointer may be set | |
| * to %NULL) and callers must take this into account. Callers must | |
| * hold the RTNL lock. | |
| * | |
| * See the structures used by these operations for further documentation. | |
| * Note that for all operations using a structure ending with a zero- | |
| * length array, the array is allocated separately in the kernel and | |
| * is passed to the driver as an additional parameter. | |
| * | |
| * See &struct net_device and &struct net_device_ops for documentation | |
| * of the generic netdev features interface. | |
| */ | |
| struct ethtool_ops { | |
| u32 cap_link_lanes_supported:1; | |
| u32 cap_rss_ctx_supported:1; | |
| u32 cap_rss_sym_xor_supported:1; | |
| u32 rxfh_per_ctx_key:1; | |
| u32 cap_rss_rxnfc_adds:1; | |
| u32 rxfh_indir_space; | |
| u16 rxfh_key_space; | |
| u16 rxfh_priv_size; | |
| u32 rxfh_max_num_contexts; | |
| u32 supported_coalesce_params; | |
| u32 supported_ring_params; | |
| void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *); | |
| int (*get_regs_len)(struct net_device *); | |
| void (*get_regs)(struct net_device *, struct ethtool_regs *, void *); | |
| void (*get_wol)(struct net_device *, struct ethtool_wolinfo *); | |
| int (*set_wol)(struct net_device *, struct ethtool_wolinfo *); | |
| u32 (*get_msglevel)(struct net_device *); | |
| void (*set_msglevel)(struct net_device *, u32); | |
| int (*nway_reset)(struct net_device *); | |
| u32 (*get_link)(struct net_device *); | |
| int (*get_link_ext_state)(struct net_device *, | |
| struct ethtool_link_ext_state_info *); | |
| void (*get_link_ext_stats)(struct net_device *dev, | |
| struct ethtool_link_ext_stats *stats); | |
| int (*get_eeprom_len)(struct net_device *); | |
| int (*get_eeprom)(struct net_device *, | |
| struct ethtool_eeprom *, u8 *); | |
| int (*set_eeprom)(struct net_device *, | |
| struct ethtool_eeprom *, u8 *); | |
| int (*get_coalesce)(struct net_device *, | |
| struct ethtool_coalesce *, | |
| struct kernel_ethtool_coalesce *, | |
| struct netlink_ext_ack *); | |
| int (*set_coalesce)(struct net_device *, | |
| struct ethtool_coalesce *, | |
| struct kernel_ethtool_coalesce *, | |
| struct netlink_ext_ack *); | |
| void (*get_ringparam)(struct net_device *, | |
| struct ethtool_ringparam *, | |
| struct kernel_ethtool_ringparam *, | |
| struct netlink_ext_ack *); | |
| int (*set_ringparam)(struct net_device *, | |
| struct ethtool_ringparam *, | |
| struct kernel_ethtool_ringparam *, | |
| struct netlink_ext_ack *); | |
| void (*get_pause_stats)(struct net_device *dev, | |
| struct ethtool_pause_stats *pause_stats); | |
| void (*get_pauseparam)(struct net_device *, | |
| struct ethtool_pauseparam*); | |
| int (*set_pauseparam)(struct net_device *, | |
| struct ethtool_pauseparam*); | |
| void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); | |
| void (*get_strings)(struct net_device *, u32 stringset, u8 *); | |
| int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state); | |
| void (*get_ethtool_stats)(struct net_device *, | |
| struct ethtool_stats *, u64 *); | |
| int (*begin)(struct net_device *); | |
| void (*complete)(struct net_device *); | |
| u32 (*get_priv_flags)(struct net_device *); | |
| int (*set_priv_flags)(struct net_device *, u32); | |
| int (*get_sset_count)(struct net_device *, int); | |
| int (*get_rxnfc)(struct net_device *, | |
| struct ethtool_rxnfc *, u32 *rule_locs); | |
| int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); | |
| int (*flash_device)(struct net_device *, struct ethtool_flash *); | |
| int (*reset)(struct net_device *, u32 *); | |
| u32 (*get_rxfh_key_size)(struct net_device *); | |
| u32 (*get_rxfh_indir_size)(struct net_device *); | |
| int (*get_rxfh)(struct net_device *, struct ethtool_rxfh_param *); | |
| int (*set_rxfh)(struct net_device *, struct ethtool_rxfh_param *, | |
| struct netlink_ext_ack *extack); | |
| int (*create_rxfh_context)(struct net_device *, | |
| struct ethtool_rxfh_context *ctx, | |
| const struct ethtool_rxfh_param *rxfh, | |
| struct netlink_ext_ack *extack); | |
| int (*modify_rxfh_context)(struct net_device *, | |
| struct ethtool_rxfh_context *ctx, | |
| const struct ethtool_rxfh_param *rxfh, | |
| struct netlink_ext_ack *extack); | |
| int (*remove_rxfh_context)(struct net_device *, | |
| struct ethtool_rxfh_context *ctx, | |
| u32 rss_context, | |
| struct netlink_ext_ack *extack); | |
| void (*get_channels)(struct net_device *, struct ethtool_channels *); | |
| int (*set_channels)(struct net_device *, struct ethtool_channels *); | |
| int (*get_dump_flag)(struct net_device *, struct ethtool_dump *); | |
| int (*get_dump_data)(struct net_device *, | |
| struct ethtool_dump *, void *); | |
| int (*set_dump)(struct net_device *, struct ethtool_dump *); | |
| int (*get_ts_info)(struct net_device *, struct kernel_ethtool_ts_info *); | |
| void (*get_ts_stats)(struct net_device *dev, | |
| struct ethtool_ts_stats *ts_stats); | |
| int (*get_module_info)(struct net_device *, | |
| struct ethtool_modinfo *); | |
| int (*get_module_eeprom)(struct net_device *, | |
| struct ethtool_eeprom *, u8 *); | |
| int (*get_eee)(struct net_device *dev, struct ethtool_keee *eee); | |
| int (*set_eee)(struct net_device *dev, struct ethtool_keee *eee); | |
| int (*get_tunable)(struct net_device *, | |
| const struct ethtool_tunable *, void *); | |
| int (*set_tunable)(struct net_device *, | |
| const struct ethtool_tunable *, const void *); | |
| int (*get_per_queue_coalesce)(struct net_device *, u32, | |
| struct ethtool_coalesce *); | |
| int (*set_per_queue_coalesce)(struct net_device *, u32, | |
| struct ethtool_coalesce *); | |
| int (*get_link_ksettings)(struct net_device *, | |
| struct ethtool_link_ksettings *); | |
| int (*set_link_ksettings)(struct net_device *, | |
| const struct ethtool_link_ksettings *); | |
| void (*get_fec_stats)(struct net_device *dev, | |
| struct ethtool_fec_stats *fec_stats); | |
| int (*get_fecparam)(struct net_device *, | |
| struct ethtool_fecparam *); | |
| int (*set_fecparam)(struct net_device *, | |
| struct ethtool_fecparam *); | |
| void (*get_ethtool_phy_stats)(struct net_device *, | |
| struct ethtool_stats *, u64 *); | |
| int (*get_phy_tunable)(struct net_device *, | |
| const struct ethtool_tunable *, void *); | |
| int (*set_phy_tunable)(struct net_device *, | |
| const struct ethtool_tunable *, const void *); | |
| int (*get_module_eeprom_by_page)(struct net_device *dev, | |
| const struct ethtool_module_eeprom *page, | |
| struct netlink_ext_ack *extack); | |
| int (*set_module_eeprom_by_page)(struct net_device *dev, | |
| const struct ethtool_module_eeprom *page, | |
| struct netlink_ext_ack *extack); | |
| void (*get_eth_phy_stats)(struct net_device *dev, | |
| struct ethtool_eth_phy_stats *phy_stats); | |
| void (*get_eth_mac_stats)(struct net_device *dev, | |
| struct ethtool_eth_mac_stats *mac_stats); | |
| void (*get_eth_ctrl_stats)(struct net_device *dev, | |
| struct ethtool_eth_ctrl_stats *ctrl_stats); | |
| void (*get_rmon_stats)(struct net_device *dev, | |
| struct ethtool_rmon_stats *rmon_stats, | |
| const struct ethtool_rmon_hist_range **ranges); | |
| int (*get_module_power_mode)(struct net_device *dev, | |
| struct ethtool_module_power_mode_params *params, | |
| struct netlink_ext_ack *extack); | |
| int (*set_module_power_mode)(struct net_device *dev, | |
| const struct ethtool_module_power_mode_params *params, | |
| struct netlink_ext_ack *extack); | |
| int (*get_mm)(struct net_device *dev, struct ethtool_mm_state *state); | |
| int (*set_mm)(struct net_device *dev, struct ethtool_mm_cfg *cfg, | |
| struct netlink_ext_ack *extack); | |
| void (*get_mm_stats)(struct net_device *dev, struct ethtool_mm_stats *stats); | |
| }; | |
| int ethtool_check_ops(const struct ethtool_ops *ops); | |
| struct ethtool_rx_flow_rule { | |
| struct flow_rule *rule; | |
| unsigned long priv[]; | |
| }; | |
| struct ethtool_rx_flow_spec_input { | |
| const struct ethtool_rx_flow_spec *fs; | |
| u32 rss_ctx; | |
| }; | |
| struct ethtool_rx_flow_rule * | |
| ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input); | |
| void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule); | |
| bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings *cmd); | |
| int ethtool_virtdev_set_link_ksettings(struct net_device *dev, | |
| const struct ethtool_link_ksettings *cmd, | |
| u32 *dev_speed, u8 *dev_duplex); | |
| /** | |
| * struct ethtool_netdev_state - per-netdevice state for ethtool features | |
| * @rss_ctx: XArray of custom RSS contexts | |
| * @rss_lock: Protects entries in @rss_ctx. May be taken from | |
| * within RTNL. | |
| * @wol_enabled: Wake-on-LAN is enabled | |
| * @module_fw_flash_in_progress: Module firmware flashing is in progress. | |
| */ | |
| struct ethtool_netdev_state { | |
| struct xarray rss_ctx; | |
| struct mutex rss_lock; | |
| unsigned wol_enabled:1; | |
| unsigned module_fw_flash_in_progress:1; | |
| }; | |
| struct phy_device; | |
| struct phy_tdr_config; | |
| struct phy_plca_cfg; | |
| struct phy_plca_status; | |
| /** | |
| * struct ethtool_phy_ops - Optional PHY device options | |
| * @get_sset_count: Get number of strings that @get_strings will write. | |
| * @get_strings: Return a set of strings that describe the requested objects | |
| * @get_stats: Return extended statistics about the PHY device. | |
| * @get_plca_cfg: Return PLCA configuration. | |
| * @set_plca_cfg: Set PLCA configuration. | |
| * @get_plca_status: Get PLCA configuration. | |
| * @start_cable_test: Start a cable test | |
| * @start_cable_test_tdr: Start a Time Domain Reflectometry cable test | |
| * | |
| * All operations are optional (i.e. the function pointer may be set to %NULL) | |
| * and callers must take this into account. Callers must hold the RTNL lock. | |
| */ | |
| struct ethtool_phy_ops { | |
| int (*get_sset_count)(struct phy_device *dev); | |
| int (*get_strings)(struct phy_device *dev, u8 *data); | |
| int (*get_stats)(struct phy_device *dev, | |
| struct ethtool_stats *stats, u64 *data); | |
| int (*get_plca_cfg)(struct phy_device *dev, | |
| struct phy_plca_cfg *plca_cfg); | |
| int (*set_plca_cfg)(struct phy_device *dev, | |
| const struct phy_plca_cfg *plca_cfg, | |
| struct netlink_ext_ack *extack); | |
| int (*get_plca_status)(struct phy_device *dev, | |
| struct phy_plca_status *plca_st); | |
| int (*start_cable_test)(struct phy_device *phydev, | |
| struct netlink_ext_ack *extack); | |
| int (*start_cable_test_tdr)(struct phy_device *phydev, | |
| struct netlink_ext_ack *extack, | |
| const struct phy_tdr_config *config); | |
| }; | |
| /** | |
| * ethtool_set_ethtool_phy_ops - Set the ethtool_phy_ops singleton | |
| * @ops: Ethtool PHY operations to set | |
| */ | |
| void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops); | |
| /** | |
| * ethtool_params_from_link_mode - Derive link parameters from a given link mode | |
| * @link_ksettings: Link parameters to be derived from the link mode | |
| * @link_mode: Link mode | |
| */ | |
| void | |
| ethtool_params_from_link_mode(struct ethtool_link_ksettings *link_ksettings, | |
| enum ethtool_link_mode_bit_indices link_mode); | |
| /** | |
| * ethtool_get_phc_vclocks - Derive phc vclocks information, and caller | |
| * is responsible to free memory of vclock_index | |
| * @dev: pointer to net_device structure | |
| * @vclock_index: pointer to pointer of vclock index | |
| * | |
| * Return number of phc vclocks | |
| */ | |
| int ethtool_get_phc_vclocks(struct net_device *dev, int **vclock_index); | |
| /* Some generic methods drivers may use in their ethtool_ops */ | |
| u32 ethtool_op_get_link(struct net_device *dev); | |
| int ethtool_op_get_ts_info(struct net_device *dev, | |
| struct kernel_ethtool_ts_info *eti); | |
| /** | |
| * ethtool_mm_frag_size_add_to_min - Translate (standard) additional fragment | |
| * size expressed as multiplier into (absolute) minimum fragment size | |
| * value expressed in octets | |
| * @val_add: Value of addFragSize multiplier | |
| */ | |
| static inline u32 ethtool_mm_frag_size_add_to_min(u32 val_add) | |
| { | |
| return (ETH_ZLEN + ETH_FCS_LEN) * (1 + val_add) - ETH_FCS_LEN; | |
| } | |
| /** | |
| * ethtool_mm_frag_size_min_to_add - Translate (absolute) minimum fragment size | |
| * expressed in octets into (standard) additional fragment size expressed | |
| * as multiplier | |
| * @val_min: Value of addFragSize variable in octets | |
| * @val_add: Pointer where the standard addFragSize value is to be returned | |
| * @extack: Netlink extended ack | |
| * | |
| * Translate a value in octets to one of 0, 1, 2, 3 according to the reverse | |
| * application of the 802.3 formula 64 * (1 + addFragSize) - 4. To be called | |
| * by drivers which do not support programming the minimum fragment size to a | |
| * continuous range. Returns error on other fragment length values. | |
| */ | |
| static inline int ethtool_mm_frag_size_min_to_add(u32 val_min, u32 *val_add, | |
| struct netlink_ext_ack *extack) | |
| { | |
| u32 add_frag_size; | |
| for (add_frag_size = 0; add_frag_size < 4; add_frag_size++) { | |
| if (ethtool_mm_frag_size_add_to_min(add_frag_size) == val_min) { | |
| *val_add = add_frag_size; | |
| return 0; | |
| } | |
| } | |
| NL_SET_ERR_MSG_MOD(extack, | |
| "minFragSize required to be one of 60, 124, 188 or 252"); | |
| return -EINVAL; | |
| } | |
| /** | |
| * ethtool_get_ts_info_by_layer - Obtains time stamping capabilities from the MAC or PHY layer. | |
| * @dev: pointer to net_device structure | |
| * @info: buffer to hold the result | |
| * Returns zero on success, non-zero otherwise. | |
| */ | |
| int ethtool_get_ts_info_by_layer(struct net_device *dev, | |
| struct kernel_ethtool_ts_info *info); | |
| /** | |
| * ethtool_sprintf - Write formatted string to ethtool string data | |
| * @data: Pointer to a pointer to the start of string to update | |
| * @fmt: Format of string to write | |
| * | |
| * Write formatted string to *data. Update *data to point at start of | |
| * next string. | |
| */ | |
| extern __printf(2, 3) void ethtool_sprintf(u8 **data, const char *fmt, ...); | |
| /** | |
| * ethtool_puts - Write string to ethtool string data | |
| * @data: Pointer to a pointer to the start of string to update | |
| * @str: String to write | |
| * | |
| * Write string to *data without a trailing newline. Update *data | |
| * to point at start of next string. | |
| * | |
| * Prefer this function to ethtool_sprintf() when given only | |
| * two arguments or if @fmt is just "%s". | |
| */ | |
| extern void ethtool_puts(u8 **data, const char *str); | |
| /* Link mode to forced speed capabilities maps */ | |
| struct ethtool_forced_speed_map { | |
| u32 speed; | |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(caps); | |
| const u32 *cap_arr; | |
| u32 arr_size; | |
| }; | |
| #define ETHTOOL_FORCED_SPEED_MAP(prefix, value) \ | |
| { \ | |
| .speed = SPEED_##value, \ | |
| .cap_arr = prefix##_##value, \ | |
| .arr_size = ARRAY_SIZE(prefix##_##value), \ | |
| } | |
| void | |
| ethtool_forced_speed_maps_init(struct ethtool_forced_speed_map *maps, u32 size); | |
| /* C33 PSE extended state and substate. */ | |
| struct ethtool_c33_pse_ext_state_info { | |
| enum ethtool_c33_pse_ext_state c33_pse_ext_state; | |
| union { | |
| enum ethtool_c33_pse_ext_substate_error_condition error_condition; | |
| enum ethtool_c33_pse_ext_substate_mr_pse_enable mr_pse_enable; | |
| enum ethtool_c33_pse_ext_substate_option_detect_ted option_detect_ted; | |
| enum ethtool_c33_pse_ext_substate_option_vport_lim option_vport_lim; | |
| enum ethtool_c33_pse_ext_substate_ovld_detected ovld_detected; | |
| enum ethtool_c33_pse_ext_substate_power_not_available power_not_available; | |
| enum ethtool_c33_pse_ext_substate_short_detected short_detected; | |
| u32 __c33_pse_ext_substate; | |
| }; | |
| }; | |
| struct ethtool_c33_pse_pw_limit_range { | |
| u32 min; | |
| u32 max; | |
| }; | |
| #endif /* _LINUX_ETHTOOL_H */ |